summaryrefslogtreecommitdiff
path: root/scripts
AgeCommit message (Collapse)Author
2020-06-01Merge tag 'objtool-core-2020-06-01' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull objtool updates from Ingo Molnar: "There are a lot of objtool changes in this cycle, all across the map: - Speed up objtool significantly, especially when there are large number of sections - Improve objtool's understanding of special instructions such as IRET, to reduce the number of annotations required - Implement 'noinstr' validation - Do baby steps for non-x86 objtool use - Simplify/fix retpoline decoding - Add vmlinux validation - Improve documentation - Fix various bugs and apply smaller cleanups" * tag 'objtool-core-2020-06-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (54 commits) objtool: Enable compilation of objtool for all architectures objtool: Move struct objtool_file into arch-independent header objtool: Exit successfully when requesting help objtool: Add check_kcov_mode() to the uaccess safelist samples/ftrace: Fix asm function ELF annotations objtool: optimize add_dead_ends for split sections objtool: use gelf_getsymshndx to handle >64k sections objtool: Allow no-op CFI ops in alternatives x86/retpoline: Fix retpoline unwind x86: Change {JMP,CALL}_NOSPEC argument x86: Simplify retpoline declaration x86/speculation: Change FILL_RETURN_BUFFER to work with objtool objtool: Add support for intra-function calls objtool: Move the IRET hack into the arch decoder objtool: Remove INSN_STACK objtool: Make handle_insn_ops() unconditional objtool: Rework allocating stack_ops on decode objtool: UNWIND_HINT_RET_OFFSET should not check registers objtool: is_fentry_call() crashes if call has no destination x86,smap: Fix smap_{save,restore}() alternatives ...
2020-06-01Merge tag 'core-kprobes-2020-06-01' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull kprobes updates from Ingo Molnar: "Various kprobes updates, mostly centered around cleaning up the no-instrumentation logic. Instead of the current per debug facility blacklist, use the more generic .noinstr.text approach, combined with a 'noinstr' marker for functions. Also add instrumentation_begin()/end() to better manage the exact place in entry code where instrumentation may be used. And add a kprobes blacklist for modules" * tag 'core-kprobes-2020-06-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: kprobes: Prevent probes in .noinstr.text section vmlinux.lds.h: Create section for protection against instrumentation samples/kprobes: Add __kprobes and NOKPROBE_SYMBOL() for handlers. kprobes: Support NOKPROBE_SYMBOL() in modules kprobes: Support __kprobes blacklist in modules kprobes: Lock kprobe_mutex while showing kprobe_blacklist
2020-05-31checkpatch/coding-style: deprecate 80-column warningJoe Perches
Yes, staying withing 80 columns is certainly still _preferred_. But it's not the hard limit that the checkpatch warnings imply, and other concerns can most certainly dominate. Increase the default limit to 100 characters. Not because 100 characters is some hard limit either, but that's certainly a "what are you doing" kind of value and less likely to be about the occasional slightly longer lines. Miscellanea: - to avoid unnecessary whitespace changes in files, checkpatch will no longer emit a warning about line length when scanning files unless --strict is also used - Add a bit to coding-style about alignment to open parenthesis Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-05-19vmlinux.lds.h: Create section for protection against instrumentationThomas Gleixner
Some code pathes, especially the low level entry code, must be protected against instrumentation for various reasons: - Low level entry code can be a fragile beast, especially on x86. - With NO_HZ_FULL RCU state needs to be established before using it. Having a dedicated section for such code allows to validate with tooling that no unsafe functions are invoked. Add the .noinstr.text section and the noinstr attribute to mark functions. noinstr implies notrace. Kprobes will gain a section check later. Provide also a set of markers: instrumentation_begin()/end() These are used to mark code inside a noinstr function which calls into regular instrumentable text section as safe. The instrumentation markers are only active when CONFIG_DEBUG_ENTRY is enabled as the end marker emits a NOP to prevent the compiler from merging the annotation points. This means the objtool verification requires a kernel compiled with this option. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com> Acked-by: Peter Zijlstra <peterz@infradead.org> Link: https://lkml.kernel.org/r/20200505134100.075416272@linutronix.de
2020-05-18Merge tag 'v5.7-rc6' into objtool/core, to pick up fixes and resolve ↵Ingo Molnar
semantic conflict Resolve structural conflict between: 59566b0b622e: ("x86/ftrace: Have ftrace trampolines turn read-only at the end of system boot up") which introduced a new reference to 'ftrace_epilogue', and: 0298739b7983: ("x86,ftrace: Fix ftrace_regs_caller() unwind") Which renamed it to 'ftrace_caller_end'. Rename the new usage site in the merge commit. Signed-off-by: Ingo Molnar <mingo@kernel.org>
2020-05-07scripts/gdb: repair rb_first() and rb_last()Aymeric Agon-Rambosson
The current implementations of the rb_first() and rb_last() gdb functions have a variable that references itself in its instanciation, which causes the function to throw an error if a specific condition on the argument is met. The original author rather intended to reference the argument and made a typo. Referring the argument instead makes the function work as intended. Signed-off-by: Aymeric Agon-Rambosson <aymeric.agon@yandex.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Cc: Jan Kiszka <jan.kiszka@siemens.com> Cc: Kieran Bingham <kbingham@kernel.org> Cc: Douglas Anderson <dianders@chromium.org> Cc: Nikolay Borisov <n.borisov.lkml@gmail.com> Cc: Jackie Liu <liuyun01@kylinos.cn> Cc: Jason Wessel <jason.wessel@windriver.com> Link: http://lkml.kernel.org/r/20200427051029.354840-1-aymeric.agon@yandex.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-05-07scripts/decodecode: fix trapping instruction formattingIvan Delalande
If the trapping instruction contains a ':', for a memory access through segment registers for example, the sed substitution will insert the '*' marker in the middle of the instruction instead of the line address: 2b: 65 48 0f c7 0f cmpxchg16b %gs:*(%rdi) <-- trapping instruction I started to think I had forgotten some quirk of the assembly syntax before noticing that it was actually coming from the script. Fix it to add the address marker at the right place for these instructions: 28: 49 8b 06 mov (%r14),%rax 2b:* 65 48 0f c7 0f cmpxchg16b %gs:(%rdi) <-- trapping instruction 30: 0f 94 c0 sete %al Fixes: 18ff44b189e2 ("scripts/decodecode: make faulting insn ptr more robust") Signed-off-by: Ivan Delalande <colona@arista.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Borislav Petkov <bp@suse.de> Link: http://lkml.kernel.org/r/20200419223653.GA31248@visor Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-05-04Merge tag 'gcc-plugins-v5.7-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull gcc-plugins fixes from Kees Cook: "GCC 10 fixes for gcc-plugins: - Adjust caller of cgraph_create_edge for GCC 10 argument usage - Update common headers to build under GCC 10 (Frédéric Pierret)" * tag 'gcc-plugins-v5.7-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: gcc-common.h: Update for GCC 10 gcc-plugins/stackleak: Avoid assignment for unused macro argument
2020-05-04gcc-10 warnings: fix low-hanging fruitLinus Torvalds
Due to a bug-report that was compiler-dependent, I updated one of my machines to gcc-10. That shows a lot of new warnings. Happily they seem to be mostly the valid kind, but it's going to cause a round of churn for getting rid of them.. This is the really low-hanging fruit of removing a couple of zero-sized arrays in some core code. We have had a round of these patches before, and we'll have many more coming, and there is nothing special about these except that they were particularly trivial, and triggered more warnings than most. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-24Merge tag 'kbuild-fixes-v5.7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild fixes from Masahiro Yamada: - fix scripts/config to properly handle ':' in string type CONFIG options - fix unneeded rebuilds of DT schema check rule - git rid of ordering dependency between <linux/vermagic.h> and <linux/module.h> to fix build errors in some network drivers - clean up generated headers of host arch with 'make ARCH=um mrproper' * tag 'kbuild-fixes-v5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: h8300: ignore vmlinux.lds Documentation: kbuild: fix the section title format um: ensure `make ARCH=um mrproper` removes arch/$(SUBARCH)/include/generated/ arch: split MODULE_ARCH_VERMAGIC definitions out to <asm/vermagic.h> kbuild: fix DT binding schema rule again to avoid needless rebuilds scripts/config: allow colons in option strings for sed
2020-04-23kbuild: fix DT binding schema rule again to avoid needless rebuildsMasahiro Yamada
Since commit 7a0496056064 ("kbuild: fix DT binding schema rule to detect command line changes"), this rule is every time re-run even if you change nothing. cmd_dtc takes one additional parameter to pass to the -O option of dtc. We need to pass 'yaml' to if_changed_rule. Otherwise, cmd-check invoked from if_changed_rule is false positive. Fixes: 7a0496056064 ("kbuild: fix DT binding schema rule to detect command line changes") Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-04-23scripts/config: allow colons in option strings for sedJeremie Francois (on alpha)
Sed broke on some strings as it used colon as a separator. I made it more robust by using \001, which is legit POSIX AFAIK. E.g. ./config --set-str CONFIG_USBNET_DEVADDR "de:ad:be:ef:00:01" failed with: sed: -e expression #1, char 55: unknown option to `s' Signed-off-by: Jeremie Francois (on alpha) <jeremie.francois@gmail.com> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-04-22kbuild/objtool: Add objtool-vmlinux.o passPeter Zijlstra
Now that objtool is capable of processing vmlinux.o and actually has something useful to do there, (conditionally) add it to the final link pass. This will increase build time by a few seconds. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Miroslav Benes <mbenes@suse.cz> Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com> Acked-by: Josh Poimboeuf <jpoimboe@redhat.com> Link: https://lkml.kernel.org/r/20200416115119.287494491@infradead.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2020-04-21checkpatch: fix a typo in the regex for $allocFunctionsChristophe JAILLET
Here, we look for function such as 'netdev_alloc_skb_ip_align', so a '_' is missing in the regex. To make sure: grep -r --include=*.c skbip_a * | wc ==> 0 results grep -r --include=*.c skb_ip_a * | wc ==> 112 results Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Joe Perches <joe@perches.com> Link: http://lkml.kernel.org/r/20200407190029.892-1-christophe.jaillet@wanadoo.fr Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-17Merge tag 'docs-fixes' of git://git.lwn.net/linuxLinus Torvalds
Pull documentation fixes from Jonathan Corbet: "A handful of fixes for reasonably obnoxious documentation issues" * tag 'docs-fixes' of git://git.lwn.net/linux: scripts: documentation-file-ref-check: Add line break before exit scripts/kernel-doc: Add missing close-paren in c:function directives docs: admin-guide: merge sections for the kernel.modprobe sysctl docs: timekeeping: Use correct prototype for deprecated functions
2020-04-17kbuild: check libyaml installation for 'make dt_binding_check'Masahiro Yamada
If you run 'make dtbs_check' without installing the libyaml package, the error message "dtc needs libyaml ..." is shown. This should be checked also for 'make dt_binding_check' because dtc needs to validate *.example.dts extracted from *.yaml files. It is missing since commit 4f0e3a57d6eb ("kbuild: Add support for DT binding schema checks"), but this fix-up is applicable only after commit e10c4321dc1e ("kbuild: allow to run dt_binding_check and dtbs_check in a single command"). I gave the Fixes tag to the latter in case somebody is interested in back-porting this. Fixes: e10c4321dc1e ("kbuild: allow to run dt_binding_check and dtbs_check in a single command") Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Rob Herring <robh@kernel.org>
2020-04-15scripts: documentation-file-ref-check: Add line break before exitTiezhu Yang
If execute ./scripts/documentation-file-ref-check in a directory which is not a git tree, it will exit without a line break, fix it. Without this patch: [loongson@localhost linux-5.7-rc1]$ ./scripts/documentation-file-ref-check Warning: can't check if file exists, as this is not a git tree[loongson@localhost linux-5.7-rc1]$ With this patch: [loongson@localhost linux-5.7-rc1]$ ./scripts/documentation-file-ref-check Warning: can't check if file exists, as this is not a git tree [loongson@localhost linux-5.7-rc1]$ Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn> Reviewed-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Link: https://lore.kernel.org/r/1586857308-2040-1-git-send-email-yangtiezhu@loongson.cn Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2020-04-15scripts/kernel-doc: Add missing close-paren in c:function directivesPeter Maydell
When kernel-doc generates a 'c:function' directive for a function one of whose arguments is a function pointer, it fails to print the close-paren after the argument list of the function pointer argument. For instance: long work_on_cpu(int cpu, long (*fn) (void *, void * arg) in driver-api/basics.html is missing a ')' separating the "void *" of the 'fn' arguments from the ", void * arg" which is an argument to work_on_cpu(). Add the missing close-paren, so that we render the prototype correctly: long work_on_cpu(int cpu, long (*fn)(void *), void * arg) (Note that Sphinx stops rendering a space between the '(fn*)' and the '(void *)' once it gets something that's syntactically valid.) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Link: https://lore.kernel.org/r/20200414143743.32677-1-peter.maydell@linaro.org Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2020-04-13gcc-common.h: Update for GCC 10Frédéric Pierret (fepitre)
Remove "params.h" include, which has been dropped in GCC 10. Remove is_a_helper() macro, which is now defined in gimple.h, as seen when running './scripts/gcc-plugin.sh g++ g++ gcc': In file included from <stdin>:1: ./gcc-plugins/gcc-common.h:852:13: error: redefinition of ‘static bool is_a_helper<T>::test(U*) [with U = const gimple; T = const ggoto*]’ 852 | inline bool is_a_helper<const ggoto *>::test(const_gimple gs) | ^~~~~~~~~~~~~~~~~~~~~~~~~~ In file included from ./gcc-plugins/gcc-common.h:125, from <stdin>:1: /usr/lib/gcc/x86_64-redhat-linux/10/plugin/include/gimple.h:1037:1: note: ‘static bool is_a_helper<T>::test(U*) [with U = const gimple; T = const ggoto*]’ previously declared here 1037 | is_a_helper <const ggoto *>::test (const gimple *gs) | ^~~~~~~~~~~~~~~~~~~~~~~~~~~ Add -Wno-format-diag to scripts/gcc-plugins/Makefile to avoid meaningless warnings from error() formats used by plugins: scripts/gcc-plugins/structleak_plugin.c: In function ‘int plugin_init(plugin_name_args*, plugin_gcc_version*)’: scripts/gcc-plugins/structleak_plugin.c:253:12: warning: unquoted sequence of 2 consecutive punctuation characters ‘'-’ in format [-Wformat-diag] 253 | error(G_("unknown option '-fplugin-arg-%s-%s'"), plugin_name, argv[i].key); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Signed-off-by: Frédéric Pierret (fepitre) <frederic.pierret@qubes-os.org> Link: https://lore.kernel.org/r/20200407113259.270172-1-frederic.pierret@qubes-os.org [kees: include -Wno-format-diag for plugin builds] Signed-off-by: Kees Cook <keescook@chromium.org>
2020-04-13gcc-plugins/stackleak: Avoid assignment for unused macro argumentKees Cook
With GCC version >= 8, the cgraph_create_edge() macro argument using "frequency" goes unused. Instead of assigning a temporary variable for the argument, pass the compute_call_stmt_bb_frequency() call directly as the macro argument so that it will just not be called when it is not wanted by the macros. Silences the warning: scripts/gcc-plugins/stackleak_plugin.c:54:6: warning: variable ‘frequency’ set but not used [-Wunused-but-set-variable] Now builds cleanly with gcc-7 and gcc-9. Both boot and pass STACKLEAK_ERASING LKDTM test. Signed-off-by: Kees Cook <keescook@chromium.org>
2020-04-09kbuild: add dummy toolchains to enable all cc-option etc. in KconfigMasahiro Yamada
Staring v4.18, Kconfig evaluates compiler capabilities, and hides CONFIG options your compiler does not support. This works well if you configure and build the kernel on the same host machine. It is inconvenient if you prepare the .config that is carried to a different build environment (typically this happens when you package the kernel for distros) because using a different compiler potentially produces different CONFIG options than the real build environment. So, you probably want to make as many options visible as possible. In other words, you need to create a super-set of CONFIG options that cover any build environment. If some of the CONFIG options turned out to be unsupported on the build machine, they are automatically disabled by the nature of Kconfig. However, it is not feasible to get a full-featured compiler for every arch. This issue was discussed here: https://lkml.org/lkml/2019/12/9/620 Other than distros, savedefconfig is also a problem. Some arch sub-systems periodically resync defconfig files. If you use a less-capable compiler for savedefconfig, options that do not meet 'depends on $(cc-option,...)' will be forcibly disabled. So, 'make defconfig && make savedefconfig' may silently change the behavior. This commit adds a set of dummy toolchains that pretend to support any feature. Most of compiler features are tested by cc-option, which simply checks the exit code of $(CC). The dummy tools are shell scripts that always exit with 0. So, $(cc-option, ...) is evaluated as 'y'. There are more complicated checks such as: scripts/gcc-x86_{32,64}-has-stack-protector.sh scripts/gcc-plugin.sh scripts/tools-support-relr.sh scripts/dummy-tools/gcc passes all checks. From the top directory of the source tree, you can do: $ make CROSS_COMPILE=scripts/dummy-tools/ oldconfig Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Reviewed-by: Philipp Rudo <prudo@linux.ibm.com> Tested-by: Jeremy Cline <jcline@redhat.com>
2020-04-09kbuild: link lib-y objects to vmlinux forcibly when CONFIG_MODULES=yMasahiro Yamada
Kbuild supports not only obj-y but also lib-y to list objects linked to vmlinux. The difference between them is that all the objects from obj-y are forcibly linked to vmlinux, whereas the objects from lib-y are linked as needed; if there is no user of a lib-y object, it is not linked. lib-y is intended to list utility functions that may be called from all over the place (and may be unused at all), but it is a problem for EXPORT_SYMBOL(). Even if there is no call-site in the vmlinux, we need to keep exported symbols for the use from loadable modules. Commit 7f2084fa55e6 ("[kbuild] handle exports in lib-y objects reliably") worked around it by linking a dummy object, lib-ksyms.o, which contains references to all the symbols exported from lib.a in that directory. It uses the linker script command, EXTERN. Unfortunately, the meaning of EXTERN of ld.lld is different from that of ld.bfd. Therefore, this does not work with LD=ld.lld (CBL issue #515). Anyway, the build rule of lib-ksyms.o is somewhat tricky. So, I want to get rid of it. At first, I was thinking of accumulating lib-y objects into obj-y (or even replacing lib-y with obj-y entirely), but the lib-y syntax is used beyond the ordinary use in lib/ and arch/*/lib/. Examples: - drivers/firmware/efi/libstub/Makefile builds lib.a, which is linked into vmlinux in the own way (arm64), or linked to the decompressor (arm, x86). - arch/alpha/lib/Makefile builds lib.a which is linked not only to vmlinux, but also to bootloaders in arch/alpha/boot/Makefile. - arch/xtensa/boot/lib/Makefile builds lib.a for use from arch/xtensa/boot/boot-redboot/Makefile. One more thing, adding everything to obj-y would increase the vmlinux size of allnoconfig (or tinyconfig). For less impact, I tweaked the destination of lib.a at the top Makefile; when CONFIG_MODULES=y, lib.a goes to KBUILD_VMLINUX_OBJS, which is forcibly linked to vmlinux, otherwise lib.a goes to KBUILD_VMLINUX_LIBS as before. The size impact for normal usecases is quite small since at lease one symbol in every lib-y object is eventually called by someone. In case you are intrested, here are the figures. x86_64_defconfig: text data bss dec hex filename 19566602 5422072 1589328 26578002 1958c52 vmlinux.before 19566932 5422104 1589328 26578364 1958dbc vmlinux.after The case with the biggest impact is allnoconfig + CONFIG_MODULES=y. ARCH=x86 allnoconfig + CONFIG_MODULES=y: text data bss dec hex filename 1175162 254740 1220608 2650510 28718e vmlinux.before 1177974 254836 1220608 2653418 287cea vmlinux.after Hopefully this is still not a big deal. The per-file trimming with the static library is not so effective after all. If fine-grained optimization is desired, some architectures support CONFIG_LD_DEAD_CODE_DATA_ELIMINATION, which trims dead code per-symbol basis. When LTO is supported in mainline, even better optimization will be possible. Link: https://github.com/ClangBuiltLinux/linux/issues/515 Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Reported-by: kbuild test robot <lkp@intel.com> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
2020-04-09kbuild: remove -I$(srctree)/tools/include from scripts/MakefileMasahiro Yamada
I do not like to add an extra include path for every tool with no good reason. This should be specified per file. This line was added by commit 6520fe5564ac ("x86, realmode: 16-bit real-mode code support for relocs tool"), which did not touch anything else in scripts/. I see no reason to add this. Also, remove the comment about kallsyms because we do not have any for the rest of programs. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-04-09kbuild: mkcompile_h: Include $LD version in /proc/versionKees Cook
When doing Clang builds of the kernel, it is possible to link with either ld.bfd (binutils) or ld.lld (LLVM), but it is not possible to discover this from a running kernel. Add the "$LD -v" output to /proc/version. Signed-off-by: Kees Cook <keescook@chromium.org> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Tested-by: Nick Desaulniers <ndesaulniers@google.com> Reviewed-by: Nathan Chancellor <natechancellor@gmail.com> Tested-by: Nathan Chancellor <natechancellor@gmail.com> Reviewed-by: Fangrui Song <maskray@google.com> Reviewed-by: Sedat Dilek <sedat.dilek@gmail.com> Tested-by: Sedat Dilek <sedat.dilek@gmail.com> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-04-09kconfig: qconf: Fix a few alignment issuesMauro Carvalho Chehab
There are a few items with wrong alignments. Solve them. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-04-09kconfig: qconf: remove some old bogus TODOsMauro Carvalho Chehab
The items described on those TODOs are already solved. So, remove the comments. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-04-09kconfig: qconf: fix support for the split view modeMauro Carvalho Chehab
At least on my tests (building against Qt5.13), it seems to me that, since Kernel 3.14, the split view mode is broken. Maybe it was not a top priority during the conversion time. Anyway, this patch changes the logic in order to properly support the split view mode and the single view mode. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-04-09kconfig: qconf: fix the content of the main widgetMauro Carvalho Chehab
The port to Qt5 tried to preserve the same way as it used to work with Qt3 and Qt4. However, at least with newer versions of Qt5 (5.13), this doesn't work properly. Change the schema by adding a vertical layout, in order for it to start working properly again. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-04-09kconfig: qconf: Change title for the item windowMauro Carvalho Chehab
Both main config window and the item window have "Option" name. That sounds weird, and makes harder to debug issues of a window appearing at the wrong place. So, change the title to reflect the contents of each window. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-04-09kconfig: qconf: clean deprecated warningsMauro Carvalho Chehab
The recommended way to initialize a null string is with QString(). This is there at least since Qt5.5, with is when qconf was ported to Qt5. Fix those warnings: scripts/kconfig/qconf.cc: In member function ‘void ConfigItem::updateMenu()’: scripts/kconfig/qconf.cc:158:31: warning: ‘QString::null’ is deprecated: use QString() [-Wdeprecated-declarations] 158 | setText(noColIdx, QString::null); | ^~~~ In file included from /usr/include/qt5/QtCore/qobject.h:47, from /usr/include/qt5/QtWidgets/qwidget.h:45, from /usr/include/qt5/QtWidgets/qmainwindow.h:44, from /usr/include/qt5/QtWidgets/QMainWindow:1, from scripts/kconfig/qconf.cc:9: Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-04-09gcc-plugins: drop support for GCC <= 4.7Masahiro Yamada
Nobody was opposed to raising minimum GCC version to 4.8 [1] So, we will drop GCC <= 4.7 support sooner or later. We always use C++ compiler for building plugins for GCC >= 4.8. This commit drops the plugin support for GCC <= 4.7 a bit earlier, which allows us to dump lots of code. [1] https://lkml.org/lkml/2020/1/23/545 Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Acked-by: Kees Cook <keescook@chromium.org>
2020-04-09kbuild: Enable -Wtautological-compareNathan Chancellor
Currently, we disable -Wtautological-compare, which in turn disables a bunch of more specific tautological comparison warnings that are useful for the kernel such as -Wtautological-bitwise-compare. See clang's documentation below for the other warnings that are suppressed by -Wtautological-compare. Now that all of the major/noisy warnings have been fixed, enable -Wtautological-compare so that more issues can be caught at build time by various continuous integration setups. -Wtautological-constant-out-of-range-compare is kept disabled under a normal build but visible at W=1 because there are places in the kernel where a constant or variable size can change based on the kernel configuration. These are not fixed in a clean/concise way and the ones I have audited so far appear to be harmless. It is not a subgroup but rather just one warning so we do not lose out on much coverage by default. Link: https://github.com/ClangBuiltLinux/linux/issues/488 Link: http://releases.llvm.org/10.0.0/tools/clang/docs/DiagnosticsReference.html#wtautological-compare Link: https://bugs.llvm.org/show_bug.cgi?id=42666 Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-04-07ubsan: split "bounds" checker from other optionsKees Cook
In order to do kernel builds with the bounds checker individually available, introduce CONFIG_UBSAN_BOUNDS, with the remaining options under CONFIG_UBSAN_MISC. For example, using this, we can start to expand the coverage syzkaller is providing. Right now, all of UBSan is disabled for syzbot builds because taken as a whole, it is too noisy. This will let us focus on one feature at a time. For the bounds checker specifically, this provides a mechanism to eliminate an entire class of array overflows with close to zero performance overhead (I cannot measure a difference). In my (mostly) defconfig, enabling bounds checking adds ~4200 checks to the kernel. Performance changes are in the noise, likely due to the branch predictors optimizing for the non-fail path. Some notes on the bounds checker: - it does not instrument {mem,str}*()-family functions, it only instruments direct indexed accesses (e.g. "foo[i]"). Dealing with the {mem,str}*()-family functions is a work-in-progress around CONFIG_FORTIFY_SOURCE[1]. - it ignores flexible array members, including the very old single byte (e.g. "int foo[1];") declarations. (Note that GCC's implementation appears to ignore _all_ trailing arrays, but Clang only ignores empty, 0, and 1 byte arrays[2].) [1] https://github.com/KSPP/linux/issues/6 [2] https://gcc.gnu.org/bugzilla/show_bug.cgi?id=92589 Suggested-by: Elena Petrova <lenaptr@google.com> Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Acked-by: Dmitry Vyukov <dvyukov@google.com> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Konovalov <andreyknvl@google.com> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: "Gustavo A. R. Silva" <gustavo@embeddedor.com> Link: http://lkml.kernel.org/r/20200227193516.32566-3-keescook@chromium.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-07ubsan: add trap instrumentation optionKees Cook
Patch series "ubsan: Split out bounds checker", v5. This splits out the bounds checker so it can be individually used. This is enabled in Android and hopefully for syzbot. Includes LKDTM tests for behavioral corner-cases (beyond just the bounds checker), and adjusts ubsan and kasan slightly for correct panic handling. This patch (of 6): The Undefined Behavior Sanitizer can operate in two modes: warning reporting mode via lib/ubsan.c handler calls, or trap mode, which uses __builtin_trap() as the handler. Using lib/ubsan.c means the kernel image is about 5% larger (due to all the debugging text and reporting structures to capture details about the warning conditions). Using the trap mode, the image size changes are much smaller, though at the loss of the "warning only" mode. In order to give greater flexibility to system builders that want minimal changes to image size and are prepared to deal with kernel code being aborted and potentially destabilizing the system, this introduces CONFIG_UBSAN_TRAP. The resulting image sizes comparison: text data bss dec hex filename 19533663 6183037 18554956 44271656 2a38828 vmlinux.stock 19991849 7618513 18874448 46484810 2c54d4a vmlinux.ubsan 19712181 6284181 18366540 44362902 2a4ec96 vmlinux.ubsan-trap CONFIG_UBSAN=y: image +4.8% (text +2.3%, data +18.9%) CONFIG_UBSAN_TRAP=y: image +0.2% (text +0.9%, data +1.6%) Additionally adjusts the CONFIG_UBSAN Kconfig help for clarity and removes the mention of non-existing boot param "ubsan_handle". Suggested-by: Elena Petrova <lenaptr@google.com> Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Dmitry Vyukov <dvyukov@google.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Andrey Konovalov <andreyknvl@google.com> Cc: Alexander Potapenko <glider@google.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: "Gustavo A. R. Silva" <gustavo@embeddedor.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Link: http://lkml.kernel.org/r/20200227193516.32566-2-keescook@chromium.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-07checkpatch: avoid warning about uninitialized_var()Joe Perches
WARNING: function definition argument 'flags' should also have an identifier name #26: FILE: drivers/tty/serial/sh-sci.c:1348: + unsigned long uninitialized_var(flags); Special-case uninitialized_var() to prevent this. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Tested-by: Andrew Morton <akpm@linux-foundation.org> Link: http://lkml.kernel.org/r/7db7944761b0bd88c70eb17d4b7f40fe589e14ed.camel@perches.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-07checkpatch: check proper licensing of Devicetree bindingsLubomir Rintel
According to Devicetree maintainers (see Link: below), the Devicetree binding documents are preferrably licensed (GPL-2.0-only OR BSD-2-Clause). Let's check that. The actual check is a bit more relaxed, to allow more liberal but compatible licensing (e.g. GPL-2.0-or-later OR BSD-2-Clause). Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Joe Perches <joe@perches.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Rob Herring <robh@kernel.org> Cc: Neil Armstrong <narmstrong@baylibre.com> Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>, Cc: Jonas Karlman <jonas@kwiboo.se>, Cc: Jernej Skrabec <jernej.skrabec@siol.net>, Cc: Mark Rutland <mark.rutland@arm.com>, Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch>, Link: https://lore.kernel.org/lkml/20200108142132.GA4830@bogus/ Link: http://lkml.kernel.org/r/20200309215153.38824-1-lkundrak@v3.sk Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-07checkpatch: improve Gerrit Change-Id: testJoe Perches
The Gerrit Change-Id: entry is sometimes placed after a Signed-off-by: line. When this occurs, the Gerrit warning is not currently emitted as the first Signed-off-by: signature sets a flag to stop looking. Change the test to add a test for the --- patch separator and emit the warning before any before the --- and also before any diff file name. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Tested-by: John Stultz <john.stultz@linaro.org> Link: http://lkml.kernel.org/r/2f6d5f8766fe7439a116c77ea8cc721a3f2d77a2.camel@perches.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-07checkpatch: add command-line option for TAB sizeAntonio Borneo
Linux kernel coding style requires a size of 8 characters for both TAB and indentation, and such value is embedded as magic value allover the checkpatch script. This makes hard to reuse the script by other projects with different requirements in their coding style (e.g. OpenOCD [1] requires TAB size of 4 characters [2]). Replace the magic value 8 with a variable. Add a command-line option "--tab-size" to let the user select a TAB size value other than 8. [1] http://openocd.org/ [2] http://openocd.org/doc/doxygen/html/stylec.html#styleformat Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Signed-off-by: Erik Ahlén <erik.ahlen@avalonenterprise.com> Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Joe Perches <joe@perches.com> Link: http://lkml.kernel.org/r/20200122163852.124417-3-borneo.antonio@gmail.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-07checkpatch: fix multiple const * typesAntonio Borneo
Commit 1574a29f8e76 ("checkpatch: allow multiple const * types") claims to support repetition of pattern "const *", but it actually allows only one extra instance. Check the following lines int a(char const * const x[]); int b(char const * const *x); int c(char const * const * const x[]); int d(char const * const * const *x); with command ./scripts/checkpatch.pl --show-types -f filename to find that only the first line passes the test, while a warning is triggered by the other 3 lines: WARNING:FUNCTION_ARGUMENTS: function definition argument 'char const * const' should also have an identifier name The reason is that the pattern match halts at the second asterisk in the line, thus the remaining text starting with asterisk fails to match a valid name for a variable. Fixed by replacing "?" (Match 1 or 0 times) with "{0,4}" (Match no more than 4 times) in the regular expression. Fix also the similar test for types in unusual order. Fixes: 1574a29f8e76 ("checkpatch: allow multiple const * types") Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Joe Perches <joe@perches.com> Link: http://lkml.kernel.org/r/20200122163852.124417-1-borneo.antonio@gmail.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-07checkpatch: fix minor typo and mixed space+tab in indentationAntonio Borneo
Fix spelling of "concatenation". Don't use tab after space in indentation. Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Joe Perches <joe@perches.com> Link: http://lkml.kernel.org/r/20200122163852.124417-2-borneo.antonio@gmail.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-07checkpatch: prefer fallthrough; over fallthrough commentsJoe Perches
commit 294f69e662d1 ("compiler_attributes.h: Add 'fallthrough' pseudo keyword for switch/case use") added the pseudo keyword so add a test for it to checkpatch. Warn on a patch or use --strict for files. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Link: http://lkml.kernel.org/r/8b6c1b9031ab9f3cdebada06b8d46467f1492d68.camel@perches.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-07checkpatch: support "base-commit:" formatJohn Hubbard
In order to support the get-lore-mbox.py tool described in [1], I ran: git format-patch --base=<commit> --cover-letter <revrange> ... which generated a "base-commit: <commit-hash>" tag at the end of the cover letter. However, checkpatch.pl generated an error upon encounting "base-commit:" in the cover letter: "ERROR: Please use git commit description style..." ... because it found the "commit" keyword, and failed to recognize that it was part of the "base-commit" phrase, and as such, should not be subjected to the same commit description style rules. Update checkpatch.pl to include a special case for "base-commit:" (at the start of the line, possibly with some leading whitespace) so that that tag no longer generates a checkpatch error. [1] https://lwn.net/Articles/811528/ "Better tools for kernel developers" Suggested-by: Joe Perches <joe@perches.com> Signed-off-by: John Hubbard <jhubbard@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Joe Perches <joe@perches.com> Cc: Andy Whitcroft <apw@canonical.com> Cc: Konstantin Ryabitsev <konstantin@linuxfoundation.org> Cc: Jonathan Corbet <corbet@lwn.net> Link: http://lkml.kernel.org/r/20200213055004.69235-2-jhubbard@nvidia.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-07checkpatch: check SPDX tags in YAML filesLubomir Rintel
This adds a warning when a YAML file is lacking a SPDX header on first line, or it uses incorrect commenting style. Currently the only YAML files in the tree are Devicetree binding documents. Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Joe Perches <joe@perches.com> Cc: Rob Herring <robh@kernel.org> Link: http://lkml.kernel.org/r/20200129123356.388669-1-lkundrak@v3.sk Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-07checkpatch: remove email address comment from email address comparisonsJoe Perches
About 2% of the last 100K commits have email addresses that include an RFC2822 compliant comment like: Peter Zijlstra (Intel) <peterz@infradead.org> checkpatch currently does a comparison of the complete name and address to the submitted author to determine if the author has signed-off and emits a warning if the exact email names and addresses do not match. Unfortunately, the author email address can be written without the comment like: Peter Zijlstra <peterz@infradead.org> Add logic to compare the comment stripped email addresses to avoid this warning. Reported-by: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: http://lkml.kernel.org/r/ebaa2f7c8f94e25520981945cddcc1982e70e072.camel@perches.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-03Merge tag 'char-misc-5.7-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver updates from Greg KH: "Here is the big set of char/misc/other driver patches for 5.7-rc1. Lots of things in here, and it's later than expected due to some reverts to resolve some reported issues. All is now clean with no reported problems in linux-next. Included in here is: - interconnect updates - mei driver updates - uio updates - nvmem driver updates - soundwire updates - binderfs updates - coresight updates - habanalabs updates - mhi new bus type and core - extcon driver updates - some Kconfig cleanups - other small misc driver cleanups and updates As mentioned, all have been in linux-next for a while, and with the last two reverts, all is calm and good" * tag 'char-misc-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (174 commits) Revert "driver core: platform: Initialize dma_parms for platform devices" Revert "amba: Initialize dma_parms for amba devices" amba: Initialize dma_parms for amba devices driver core: platform: Initialize dma_parms for platform devices bus: mhi: core: Drop the references to mhi_dev in mhi_destroy_device() bus: mhi: core: Initialize bhie field in mhi_cntrl for RDDM capture bus: mhi: core: Add support for reading MHI info from device misc: rtsx: set correct pcr_ops for rts522A speakup: misc: Use dynamic minor numbers for speakup devices mei: me: add cedar fork device ids coresight: do not use the BIT() macro in the UAPI header Documentation: provide IBM contacts for embargoed hardware nvmem: core: remove nvmem_sysfs_get_groups() nvmem: core: use is_bin_visible for permissions nvmem: core: use device_register and device_unregister nvmem: core: add root_only member to nvmem device struct extcon: axp288: Add wakeup support extcon: Mark extcon_get_edev_name() function as exported symbol extcon: palmas: Hide error messages if gpio returns -EPROBE_DEFER dt-bindings: extcon: usbc-cros-ec: convert extcon-usbc-cros-ec.txt to yaml format ...
2020-04-03Merge tag 'spdx-5.7-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx Pull SPDX updates from Greg KH: "Here are three SPDX patches for 5.7-rc1. One fixes up the SPDX tag for a single driver, while the other two go through the tree and add SPDX tags for all of the .gitignore files as needed. Nothing too complex, but you will get a merge conflict with your current tree, that should be trivial to handle (one file modified by two things, one file deleted.) All three of these have been in linux-next for a while, with no reported issues other than the merge conflict" * tag 'spdx-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx: ASoC: MT6660: make spdxcheck.py happy .gitignore: add SPDX License Identifier .gitignore: remove too obvious comments
2020-04-02Merge tag 'devicetree-for-5.7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull devicetree updates from Rob Herring: - Unit test for overlays with GPIO hogs - Improve dma-ranges parsing to handle dma-ranges with multiple entries - Update dtc to upstream version v1.6.0-2-g87a656ae5ff9 - Improve overlay error reporting - Device link support for power-domains and hwlocks bindings - Add vendor prefixes for Beacon, Topwise, ENE, Dell, SG Micro, Elida, PocketBook, Xiaomi, Linutronix, OzzMaker, Waveshare Electronics, and ITE Tech - Add deprecated Marvell vendor prefix 'mrvl' - A bunch of binding conversions to DT schema continues. Of note, the common serial and USB connector bindings are converted. - Add more Arm CPU compatibles - Drop Mark Rutland as DT maintainer :( * tag 'devicetree-for-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (106 commits) MAINTAINERS: drop an old reference to stm32 pwm timers doc MAINTAINERS: dt: update etnaviv file reference dt-bindings: usb: dwc2: fix bindings for amlogic, meson-gxbb-usb dt-bindings: uniphier-system-bus: fix warning in the example dt-bindings: display: meson-vpu: fix indentation of reg-names' "items" dt-bindings: iio: Fix adi, ltc2983 uint64-matrix schema constraints dt-bindings: power: Fix example for power-domain dt-bindings: arm: Add some constraints for PSCI nodes of: some unittest overlays not untracked of: gpio unittest kfree() wrong object dt-bindings: phy: convert phy-rockchip-inno-usb2 bindings to yaml dt-bindings: serial: sh-sci: Convert to json-schema dt-bindings: serial: Document serialN aliases dt-bindings: thermal: tsens: Set 'additionalProperties: false' dt-bindings: thermal: tsens: Fix nvmem-cell-names schema dt-bindings: vendor-prefixes: Add Beacon vendor prefix dt-bindings: vendor-prefixes: Add Topwise of: of_private.h: Replace zero-length array with flexible-array member docs: dt: fix a broken reference to input.yaml docs: dt: fix references to ap806-system-controller.txt ...
2020-04-02Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds
Pull SCSI updates from James Bottomley: "This series has a huge amount of churn because it pulls in Mauro's doc update changing all our txt files to rst ones. Excluding that, we have the usual driver updates (qla2xxx, ufs, lpfc, zfcp, ibmvfc, pm80xx, aacraid), a treewide update for scnprintf and some other minor updates. The major core change is Hannes moving functions out of the aacraid driver and into the core" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (223 commits) scsi: aic7xxx: aic97xx: Remove FreeBSD-specific code scsi: ufs: Do not rely on prefetched data scsi: dc395x: remove dc395x_bios_param scsi: libiscsi: Fix error count for active session scsi: hpsa: correct race condition in offload enabled scsi: message: fusion: Replace zero-length array with flexible-array member scsi: qedi: Add PCI shutdown handler support scsi: qedi: Add MFW error recovery process scsi: ufs: Enable block layer runtime PM for well-known logical units scsi: ufs-qcom: Override devfreq parameters scsi: ufshcd: Let vendor override devfreq parameters scsi: ufshcd: Update the set frequency to devfreq scsi: ufs: Resume ufs host before accessing ufs device scsi: ufs-mediatek: customize the delay for enabling host scsi: ufs: make HCE polling more compact to improve initialization latency scsi: ufs: allow custom delay prior to host enabling scsi: ufs-mediatek: use common delay function scsi: ufs: introduce common and flexible delay function scsi: ufs: use an enum for host capabilities scsi: ufs: fix uninitialized tx_lanes in ufshcd_disable_tx_lcc() ...
2020-04-02scripts/spelling.txt: add more spellings to spelling.txtColin Ian King
Here are some of the more common spelling mistakes and typos that I've found while fixing up spelling mistakes in the kernel since November 2019 Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Joe Perches <joe@perches.com> Link: http://lkml.kernel.org/r/20200313174946.228216-1-colin.king@canonical.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-02scripts/spelling.txt: add syfs/sysfs patternJonathan Neuschäfer
There are a few cases in the tree where "sysfs" is misspelled as "syfs". Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.ne> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Colin Ian King <colin.king@canonical.com> Cc: Xiong <xndchn@gmail.com> Cc: Stephen Boyd <sboyd@kernel.org> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Chris Paterson <chris.paterson2@renesas.com> Cc: Luca Ceresoli <luca@lucaceresoli.net> Link: http://lkml.kernel.org/r/20200218152010.27349-1-j.neuschaefer@gmx.net Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-19 17:31:41 +0000