summaryrefslogtreecommitdiff
path: root/scripts
AgeCommit message (Collapse)Author
2019-12-08Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds
Pull networking fixes from David Miller: 1) More jumbo frame fixes in r8169, from Heiner Kallweit. 2) Fix bpf build in minimal configuration, from Alexei Starovoitov. 3) Use after free in slcan driver, from Jouni Hogander. 4) Flower classifier port ranges don't work properly in the HW offload case, from Yoshiki Komachi. 5) Use after free in hns3_nic_maybe_stop_tx(), from Yunsheng Lin. 6) Out of bounds access in mqprio_dump(), from Vladyslav Tarasiuk. 7) Fix flow dissection in dsa TX path, from Alexander Lobakin. 8) Stale syncookie timestampe fixes from Guillaume Nault. [ Did an evil merge to silence a warning introduced by this pull - Linus ] * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (84 commits) r8169: fix rtl_hw_jumbo_disable for RTL8168evl net_sched: validate TCA_KIND attribute in tc_chain_tmplt_add() r8169: add missing RX enabling for WoL on RTL8125 vhost/vsock: accept only packets with the right dst_cid net: phy: dp83867: fix hfs boot in rgmii mode net: ethernet: ti: cpsw: fix extra rx interrupt inet: protect against too small mtu values. gre: refetch erspan header from skb->data after pskb_may_pull() pppoe: remove redundant BUG_ON() check in pppoe_pernet tcp: Protect accesses to .ts_recent_stamp with {READ,WRITE}_ONCE() tcp: tighten acceptance of ACKs not matching a child socket tcp: fix rejected syncookies due to stale timestamps lpc_eth: kernel BUG on remove tcp: md5: fix potential overestimation of TCP option space net: sched: allow indirect blocks to bind to clsact in TC net: core: rename indirect block ingress cb function net-sysfs: Call dev_hold always in netdev_queue_add_kobject net: dsa: fix flow dissection on Tx path net/tls: Fix return values to avoid ENOTSUPP net: avoid an indirect call in ____sys_recvmsg() ...
2019-12-04checkpatch: reduce is_maintained_obsolete lookup runtimeJoe Perches
The is_maintained_obsolete function can be called twice using the same filename. This function spawns a process using get_maintainer.pl. Store the status of each filename when spawned and use the stored result to eliminate the spawning of unnecessary duplicate child processes. Example: old: $ time ./scripts/checkpatch.pl hp100-Move-to-staging.patch > /dev/null real 0m1.767s user 0m1.634s sys 0m0.141s new: $ time ./scripts/checkpatch.pl hp100-Move-to-staging.patch > /dev/null real 0m1.184s user 0m1.085s sys 0m0.103s Link: http://lkml.kernel.org/r/b982566a2b9b4825badce36fdfc3032bd0005151.camel@perches.com Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-12-04checkpatch: improve ignoring CamelCase SI style variants like mAJoe Perches
Ignore all upper-case variants before and after SI units like mA, mV and uV so uses like RANGE_mA do not emit a CAMELCASE message. Link: http://lkml.kernel.org/r/5ce6f9131327fd2e12d7a0e20a55f588448de090.camel@perches.com Signed-off-by: Joe Perches <joe@perches.com> Cc: Jules Irenge <jbi.octave@gmail.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-12-04scripts/get_maintainer.pl: add signatures from Fixes: <badcommit> lines in ↵Joe Perches
commit message A Fixes: lines in a commit message generally indicate that a previous commit was inadequate for whatever reason. The signers of the previous inadequate commit should also be cc'd on this new commit so update get_maintainer to find the old commit and add the original signers. Link: http://lkml.kernel.org/r/33605b9fc0e0f711236951ae84185a6218acff4f.camel@perches.com Signed-off-by: Joe Perches <joe@perches.com> Suggested-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-12-02Merge tag 'kbuild-v5.5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild updates from Masahiro Yamada: - remove unneeded asm headers from hexagon, ia64 - add 'dir-pkg' target, which works like 'tar-pkg' but skips archiving - add 'helpnewconfig' target, which shows help for new CONFIG options - support 'make nsdeps' for external modules - make rebuilds faster by deleting $(wildcard $^) checks - remove compile tests for kernel-space headers - refactor modpost to simplify modversion handling - make single target builds faster - optimize and clean up scripts/kallsyms.c - refactor various Makefiles and scripts * tag 'kbuild-v5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (59 commits) MAINTAINERS: update Kbuild/Kconfig maintainer's email address scripts/kallsyms: remove redundant initializers scripts/kallsyms: put check_symbol_range() calls close together scripts/kallsyms: make check_symbol_range() void function scripts/kallsyms: move ignored symbol types to is_ignored_symbol() scripts/kallsyms: move more patterns to the ignored_prefixes array scripts/kallsyms: skip ignored symbols very early scripts/kallsyms: add const qualifiers where possible scripts/kallsyms: make find_token() return (unsigned char *) scripts/kallsyms: replace prefix_underscores_count() with strspn() scripts/kallsyms: add sym_name() to mitigate cast ugliness scripts/kallsyms: remove unneeded length check for prefix matching scripts/kallsyms: remove redundant is_arm_mapping_symbol() scripts/kallsyms: set relative_base more effectively scripts/kallsyms: shrink table before sorting it scripts/kallsyms: fix definitely-lost memory leak scripts/kallsyms: remove unneeded #ifndef ARRAY_SIZE kbuild: make single target builds even faster modpost: respect the previous export when 'exported twice' is warned modpost: do not set ->preloaded for symbols from Module.symvers ...
2019-12-02Merge tag 'docs-5.5a' of git://git.lwn.net/linuxLinus Torvalds
Pull Documentation updates from Jonathan Corbet: "Here are the main documentation changes for 5.5: - Various kerneldoc script enhancements. - More RST conversions; those are slowing down as we run out of things to convert, but we're a ways from done still. - Dan's "maintainer profile entry" work landed at last. Now we just need to get maintainers to fill in the profiles... - A reworking of the parallel build setup to work better with a variety of systems (and to not take over huge systems entirely in particular). - The MAINTAINERS file is now converted to RST during the build. Hopefully nobody ever tries to print this thing, or they will need to load a lot of paper. - A script and documentation making it easy for maintainers to add Link: tags at commit time. Also included is the removal of a bunch of spurious CR characters" * tag 'docs-5.5a' of git://git.lwn.net/linux: (91 commits) docs: remove a bunch of stray CRs docs: fix up the maintainer profile document libnvdimm, MAINTAINERS: Maintainer Entry Profile Maintainer Handbook: Maintainer Entry Profile MAINTAINERS: Reclaim the P: tag for Maintainer Entry Profile docs, parallelism: Rearrange how jobserver reservations are made docs, parallelism: Do not leak blocking mode to other readers docs, parallelism: Fix failure path and add comment Documentation: Remove bootmem_debug from kernel-parameters.txt Documentation: security: core.rst: fix warnings Documentation/process/howto/kokr: Update for 4.x -> 5.x versioning Documentation/translation: Use Korean for Korean translation title docs/memory-barriers.txt: Remove remaining references to mmiowb() docs/memory-barriers.txt/kokr: Update I/O section to be clearer about CPU vs thread docs/memory-barriers.txt/kokr: Fix style, spacing and grammar in I/O section Documentation/kokr: Kill all references to mmiowb() docs/memory-barriers.txt/kokr: Rewrite "KERNEL I/O BARRIER EFFECTS" section docs: Add initial documentation for devfreq Documentation: Document how to get links with git am docs: Add request_irq() documentation ...
2019-12-02Merge tag 'devicetree-for-5.5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull Devicetree updates from Rob Herring: - DT schemas for PWM, syscon, power domains, SRAM, syscon-reboot, syscon-poweroff, renesas-irqc, simple-pm-bus, renesas-bsc, pwm-rcar, Renesas tpu, at24 eeprom, rtc-sh, Allwinner PS/2, sharp,ld-d5116z01b panel, Arm SMMU, max77650, Meson CEC, Amlogic canvas and DWC3 glue, Allwinner A10 mUSB and CAN, TI Davinci MDIO, QCom QCS404 interconnect, Unisoc/Spreadtrum SoCs and UART - Convert a bunch of Samsung bindings to DT schema - Convert a bunch of ST stm32 bindings to DT schema - Realtek and Exynos additions to Arm Mali bindings - Fix schema errors in RiscV CPU schema - Various schema fixes from improved meta-schema checks - Improve the handling of 'dma-ranges' and in particular fix DMA mask setup on PCI bridges - Fix a memory leak in add_changeset_property() and DT unit tests. - Several documentation improvements for schema validation - Rework build rules to improve schema validation errors - Color output for dtx_diff * tag 'devicetree-for-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (138 commits) libfdt: define INT32_MAX and UINT32_MAX in libfdt_env.h dt-bindings: arm: Remove leftover axentia.txt of: unittest: fix memory leak in attach_node_and_children of: overlay: add_changeset_property() memory leak dt-bindings: interrupt-controller: arm,gic-v3: Add missing type to interrupt-partition-* nodes dt-bindings: firmware: ixp4xx: Drop redundant minItems/maxItems dt-bindings: power: Rename back power_domain.txt bindings to fix references dt-bindings: i2c: stm32: Migrate i2c-stm32 documentation to yaml dt-bindings: mtd: Convert stm32 fmc2-nand bindings to json-schema dt-bindings: remoteproc: convert stm32-rproc to json-schema dt-bindings: mailbox: convert stm32-ipcc to json-schema dt-bindings: mfd: Convert stm32 low power timers bindings to json-schema dt-bindings: interrupt-controller: Convert stm32-exti to json-schema dt-bindings: crypto: Convert stm32 HASH bindings to json-schema dt-bindings: rng: Convert stm32 RNG bindings to json-schema dt-bindings: pwm: Convert Samsung PWM bindings to json-schema dt-bindings: pwm: Convert PWM bindings to json-schema dt-bindings: serial: Add a new compatible string for SC9863A dt-bindings: serial: Convert sprd-uart to json-schema dt-bindings: arm: Add bindings for Unisoc SC9863A ...
2019-12-02Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfDavid S. Miller
Daniel Borkmann says: ==================== pull-request: bpf 2019-12-02 The following pull-request contains BPF updates for your *net* tree. We've added 10 non-merge commits during the last 6 day(s) which contain a total of 10 files changed, 60 insertions(+), 51 deletions(-). The main changes are: 1) Fix vmlinux BTF generation for binutils pre v2.25, from Stanislav Fomichev. 2) Fix libbpf global variable relocation to take symbol's st_value offset into account, from Andrii Nakryiko. 3) Fix libbpf build on powerpc where check_abi target fails due to different readelf output format, from Aurelien Jarno. 4) Don't set BPF insns RO for the case when they are JITed in order to avoid fragmenting the direct map, from Daniel Borkmann. 5) Fix static checker warning in btf_distill_func_proto() as well as a build error due to empty enum when BPF is compiled out, from Alexei Starovoitov. 6) Fix up generation of bpf_helper_defs.h for perf, from Arnaldo Carvalho de Melo. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-01scripts/spelling.txt: add more spellings to spelling.txtColin Ian King
Here are some of the more common spelling mistakes and typos that I've found while fixing up spelling mistakes in the kernel since July 2019. Link: http://lkml.kernel.org/r/20191112092142.97989-1-colin.king@canonical.com Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-11-29bpf: Force .BTF section start to zero when dumping from vmlinuxStanislav Fomichev
While trying to figure out why fentry_fexit selftest doesn't pass for me (old pahole, broken BTF), I found out that my latest patch can break vmlinux .BTF generation. objcopy preserves section start when doing --only-section, so there is a chance (depending on where pahole inserts .BTF section) to have leading empty zeroes. Let's explicitly force section offset to zero. Before: $ objcopy --set-section-flags .BTF=alloc -O binary \ --only-section=.BTF vmlinux .btf.vmlinux.bin $ xxd .btf.vmlinux.bin | head -n1 00000000: 0000 0000 0000 0000 0000 0000 0000 0000 ................ After: $ objcopy --change-section-address .BTF=0 \ --set-section-flags .BTF=alloc -O binary \ --only-section=.BTF vmlinux .btf.vmlinux.bin $ xxd .btf.vmlinux.bin | head -n1 00000000: 9feb 0100 1800 0000 0000 0000 80e1 1c00 ................ ^BTF magic As part of this change, I'm also dropping '2>/dev/null' from objcopy invocation to be able to catch possible other issues (objcopy doesn't produce any warnings for me anymore, it did before with --dump-section). Fixes: da5fb18225b4 ("bpf: Support pre-2.25-binutils objcopy for vmlinux BTF") Signed-off-by: Stanislav Fomichev <sdf@google.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: John Fastabend <john.fastabend@gmail.com> Cc: Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/20191127225759.39923-1-sdf@google.com
2019-11-27bpf: Support pre-2.25-binutils objcopy for vmlinux BTFStanislav Fomichev
If vmlinux BTF generation fails, but CONFIG_DEBUG_INFO_BTF is set, .BTF section of vmlinux is empty and kernel will prohibit BPF loading and return "in-kernel BTF is malformed". --dump-section argument to binutils' objcopy was added in version 2.25. When using pre-2.25 binutils, BTF generation silently fails. Convert to --only-section which is present on pre-2.25 binutils. Documentation/process/changes.rst states that binutils 2.21+ is supported, not sure those standards apply to BPF subsystem. v2: * exit and print an error if gen_btf fails (John Fastabend) v3: * resend with Andrii's Acked-by/Tested-by tags Fixes: 341dfcf8d78ea ("btf: expose BTF info through sysfs") Signed-off-by: Stanislav Fomichev <sdf@google.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Tested-by: Andrii Nakryiko <andriin@fb.com> Acked-by: Andrii Nakryiko <andriin@fb.com> Cc: John Fastabend <john.fastabend@gmail.com> Link: https://lore.kernel.org/bpf/20191127161410.57327-1-sdf@google.com
2019-11-26Merge tag 'devprop-5.5-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull device properties framework updates from Rafael Wysocki: "Add support for printing fwnode names using a new conversion specifier "%pfw" (Sakari Ailus), clean up the software node and efi/apple-properties code in preparation for improved software node reference properties handling (Dmitry Torokhov) and fix the struct fwnode_operations description (Heikki Krogerus)" * tag 'devprop-5.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (22 commits) software node: simplify property_entry_read_string_array() software node: unify PROPERTY_ENTRY_XXX macros software node: remove property_entry_read_uNN_array functions software node: get rid of property_set_pointer() software node: clean up property_copy_string_array() software node: mark internal macros with double underscores efi/apple-properties: use PROPERTY_ENTRY_U8_ARRAY_LEN software node: introduce PROPERTY_ENTRY_XXX_ARRAY_LEN() software node: remove DEV_PROP_MAX device property: Fix the description of struct fwnode_operations lib/test_printf: Add tests for %pfw printk modifier lib/vsprintf: Add %pfw conversion specifier for printing fwnode names lib/vsprintf: OF nodes are first and foremost, struct device_nodes lib/vsprintf: Make use of fwnode API to obtain node names and separators lib/vsprintf: Add a note on re-using %pf or %pF lib/vsprintf: Remove support for %pF and %pf in favour of %pS and %ps device property: Add a function to obtain a node's prefix device property: Add fwnode_get_name for returning the name of a node device property: Add functions for accessing node's parents device property: Move fwnode_get_parent() up ...
2019-11-25Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextLinus Torvalds
Pull networking updates from David Miller: "Another merge window, another pull full of stuff: 1) Support alternative names for network devices, from Jiri Pirko. 2) Introduce per-netns netdev notifiers, also from Jiri Pirko. 3) Support MSG_PEEK in vsock/virtio, from Matias Ezequiel Vara Larsen. 4) Allow compiling out the TLS TOE code, from Jakub Kicinski. 5) Add several new tracepoints to the kTLS code, also from Jakub. 6) Support set channels ethtool callback in ena driver, from Sameeh Jubran. 7) New SCTP events SCTP_ADDR_ADDED, SCTP_ADDR_REMOVED, SCTP_ADDR_MADE_PRIM, and SCTP_SEND_FAILED_EVENT. From Xin Long. 8) Add XDP support to mvneta driver, from Lorenzo Bianconi. 9) Lots of netfilter hw offload fixes, cleanups and enhancements, from Pablo Neira Ayuso. 10) PTP support for aquantia chips, from Egor Pomozov. 11) Add UDP segmentation offload support to igb, ixgbe, and i40e. From Josh Hunt. 12) Add smart nagle to tipc, from Jon Maloy. 13) Support L2 field rewrite by TC offloads in bnxt_en, from Venkat Duvvuru. 14) Add a flow mask cache to OVS, from Tonghao Zhang. 15) Add XDP support to ice driver, from Maciej Fijalkowski. 16) Add AF_XDP support to ice driver, from Krzysztof Kazimierczak. 17) Support UDP GSO offload in atlantic driver, from Igor Russkikh. 18) Support it in stmmac driver too, from Jose Abreu. 19) Support TIPC encryption and auth, from Tuong Lien. 20) Introduce BPF trampolines, from Alexei Starovoitov. 21) Make page_pool API more numa friendly, from Saeed Mahameed. 22) Introduce route hints to ipv4 and ipv6, from Paolo Abeni. 23) Add UDP segmentation offload to cxgb4, Rahul Lakkireddy" * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1857 commits) libbpf: Fix usage of u32 in userspace code mm: Implement no-MMU variant of vmalloc_user_node_flags slip: Fix use-after-free Read in slip_open net: dsa: sja1105: fix sja1105_parse_rgmii_delays() macvlan: schedule bc_work even if error enetc: add support Credit Based Shaper(CBS) for hardware offload net: phy: add helpers phy_(un)lock_mdio_bus mdio_bus: don't use managed reset-controller ax88179_178a: add ethtool_op_get_ts_info() mlxsw: spectrum_router: Fix use of uninitialized adjacency index mlxsw: spectrum_router: After underlay moves, demote conflicting tunnels bpf: Simplify __bpf_arch_text_poke poke type handling bpf: Introduce BPF_TRACE_x helper for the tracing tests bpf: Add bpf_jit_blinding_enabled for !CONFIG_BPF_JIT bpf, testing: Add various tail call test cases bpf, x86: Emit patchable direct jump as tail call bpf: Constant map key tracking for prog array pokes bpf: Add poke dependency tracking for prog array maps bpf: Add initial poke descriptor table for jit images bpf: Move owner type, jited info into array auxiliary data ...
2019-11-25Merge tag 'printk-for-5.5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk Pull printk updates from Petr Mladek: - Allow to print symbolic error names via new %pe modifier. - Use pr_warn() instead of the remaining pr_warning() calls. Fix formatting of the related lines. - Add VSPRINTF entry to MAINTAINERS. * tag 'printk-for-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk: (32 commits) checkpatch: don't warn about new vsprintf pointer extension '%pe' MAINTAINERS: Add VSPRINTF tools lib api: Renaming pr_warning to pr_warn ASoC: samsung: Use pr_warn instead of pr_warning lib: cpu_rmap: Use pr_warn instead of pr_warning trace: Use pr_warn instead of pr_warning dma-debug: Use pr_warn instead of pr_warning vgacon: Use pr_warn instead of pr_warning fs: afs: Use pr_warn instead of pr_warning sh/intc: Use pr_warn instead of pr_warning scsi: Use pr_warn instead of pr_warning platform/x86: intel_oaktrail: Use pr_warn instead of pr_warning platform/x86: asus-laptop: Use pr_warn instead of pr_warning platform/x86: eeepc-laptop: Use pr_warn instead of pr_warning oprofile: Use pr_warn instead of pr_warning of: Use pr_warn instead of pr_warning macintosh: Use pr_warn instead of pr_warning idsn: Use pr_warn instead of pr_warning ide: Use pr_warn instead of pr_warning crypto: n2: Use pr_warn instead of pr_warning ...
2019-11-25scripts/kallsyms: remove redundant initializersMasahiro Yamada
These are set to zero without the explicit initializers. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-11-25scripts/kallsyms: put check_symbol_range() calls close togetherMasahiro Yamada
Put the relevant code close together. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-11-25scripts/kallsyms: make check_symbol_range() void functionMasahiro Yamada
There is no more reason to check the return value of check_symbol_range(). Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-11-25scripts/kallsyms: move ignored symbol types to is_ignored_symbol()Masahiro Yamada
Collect the ignored patterns to is_ignored_symbol(). Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-11-25scripts/kallsyms: move more patterns to the ignored_prefixes arrayMasahiro Yamada
Refactoring for shortening the code. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-11-25scripts/kallsyms: skip ignored symbols very earlyMasahiro Yamada
Unless the address range matters, symbols can be ignored earlier, which avoids unneeded memory allocation. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-11-25scripts/kallsyms: add const qualifiers where possibleMasahiro Yamada
Add 'const' where a function does not write to the pointer dereferenes. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-11-25scripts/kallsyms: make find_token() return (unsigned char *)Masahiro Yamada
The callers of this function expect (unsigned char *). I do not see a good reason to make this function return (void *). Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-11-25scripts/kallsyms: replace prefix_underscores_count() with strspn()Masahiro Yamada
You can do equivalent things with strspn(). I do not see noticeable performance difference. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-11-25scripts/kallsyms: add sym_name() to mitigate cast uglinessMasahiro Yamada
sym_entry::sym is (unsigned char *) instead of (char *) because kallsyms exploits the MSB for compression, and the characters are used as the index of token_profit array. However, it requires casting (unsigned char *) to (char *) in some places since standard library functions such as strcmp(), strlen() expect (char *). Introduce a new helper, sym_name(), which advances the given pointer by 1 and casts it to (char *). Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-11-25scripts/kallsyms: remove unneeded length check for prefix matchingMasahiro Yamada
l <= strlen(sym_name) is unnecessary for prefix matching. strncmp() will do. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-11-25scripts/kallsyms: remove redundant is_arm_mapping_symbol()Masahiro Yamada
Since commit 6f00df24ee39 ("[PATCH] Strip local symbols from kallsyms"), all symbols starting '$' are ignored. is_arm_mapping_symbol() particularly ignores $a, $t, etc. but it is redundant. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-11-25scripts/kallsyms: set relative_base more effectivelyMasahiro Yamada
Currently, record_relative_base() iterates over the entire table to find the minimum address, but it is not efficient because we sort the table anyway. After sort_symbol(), the table is sorted by address. (kallsyms parses the 'nm -n' output, so the data is already sorted by address, but this commit does not rely on it.) Move record_relative_base() after sort_symbols(), and take the first non-absolute symbol value. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-11-25scripts/kallsyms: shrink table before sorting itMasahiro Yamada
Currently, build_initial_tok_table() trims unused symbols, but it is called after sort_symbols(). It is not efficient to sort the huge table that contains unused entries. Shrink the table before sorting it. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-11-25scripts/kallsyms: fix definitely-lost memory leakMasahiro Yamada
build_initial_tok_table() overwrites unused sym_entry to shrink the table size. Before the entry is overwritten, table[i].sym must be freed since it is malloc'ed data. This fixes the 'definitely lost' report from valgrind. I ran valgrind against x86_64_defconfig of v5.4-rc8 kernel, and here is the summary: [Before the fix] LEAK SUMMARY: definitely lost: 53,184 bytes in 2,874 blocks [After the fix] LEAK SUMMARY: definitely lost: 0 bytes in 0 blocks Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-11-25scripts/kallsyms: remove unneeded #ifndef ARRAY_SIZEMasahiro Yamada
This is not defined in the standard headers. #ifndef is unneeded. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-11-23modpost: respect the previous export when 'exported twice' is warnedMasahiro Yamada
When 'exported twice' is warned, let sym_add_exported() return without updating the symbol info. This respects the previous export, which is ordered first in modules.order This simplifies the code too. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-11-23modpost: do not set ->preloaded for symbols from Module.symversMasahiro Yamada
Now that there is no overwrap between symbols from ELF files and ones from Module.symvers. So, the 'exported twice' warning should be reported irrespective of where the symbol in question came from. The exceptional case is external module; in some cases, we build an external module to provide a different version/variant of the corresponding in-kernel module, overriding the same set of exported symbols. You can see this use-case in upstream; tools/testing/nvdimm/libnvdimm.ko replaces drivers/nvdimm/libnvdimm.ko in order to link it against mocked version of core kernel symbols. So, let's relax the 'exported twice' warning when building external modules. The multiple export from external modules is warned only when the previous one is from vmlinux or itself. With this refactoring, the ugly preloading goes away. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-11-23modpost: stop symbol preloading for modversion CRCMasahiro Yamada
It is complicated to add mocked-up symbols for pre-handling CRC. Handle CRC after all the export symbols in the relevant module are registered. Call handle_modversion() after the handle_symbol() iteration. In some cases, I see atand-alone __crc_* without __ksymtab_*. For example, ARCH=arm allyesconfig produces __crc_ccitt_veneer and __crc_itu_t_veneer. I guess they come from crc_ccitt, crc_itu_t, respectively. Since __*_veneer are auto-generated symbols, just ignore them. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-11-23modpost: rename handle_modversions() to handle_symbol()Masahiro Yamada
This function handles not only modversions, but also unresolved symbols, export symbols, etc. Rename it to a more proper function name. While I was here, I also added the 'const' qualifier to *sym. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-11-23modpost: refactor namespace_from_kstrtabns() to not hard-code section nameMasahiro Yamada
Currently, namespace_from_kstrtabns() relies on the fact that namespace strings are recorded in the __ksymtab_strings section. Actually, it is coded in include/linux/export.h, but modpost does not need to hard-code the section name. Elf_Sym::st_shndx holds the index of the relevant section. Using it is a more portable way to get the namespace string. Make namespace_from_kstrtabns() simply call sym_get_data(), and delete the info->ksymtab_strings . While I was here, I added more 'const' qualifiers to pointers. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-11-23modpost: add a helper to get data pointed by a symbolMasahiro Yamada
When CONFIG_MODULE_REL_CRCS is enabled, the value of __crc_* is not an absolute value, but the address to the CRC data embedded in the .rodata section. Getting the data pointed by the symbol value is somewhat complex. Split it out into a new helper, sym_get_data(). I will reuse it to refactor namespace_from_kstrtabns() in the next commit. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-11-22docs, parallelism: Rearrange how jobserver reservations are madeKees Cook
Rasmus correctly observed that the existing jobserver reservation only worked if no other build targets were specified. The correct approach is to hold the jobserver slots until sphinx has finished. To fix this, the following changes are made: - refactor (and rename) scripts/jobserver-exec to set an environment variable for the maximally reserved jobserver slots and exec a child, to release the slots on exit. - create Documentation/scripts/parallel-wrapper.sh which examines both $PARALLELISM and the detected "-jauto" logic from Documentation/Makefile to decide sphinx's final -j argument. - chain these together in Documentation/Makefile Suggested-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Link: https://lore.kernel.org/lkml/eb25959a-9ec4-3530-2031-d9d716b40b20@rasmusvillemoes.dk Signed-off-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20191121205929.40371-4-keescook@chromium.org Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2019-11-22docs, parallelism: Do not leak blocking mode to other readersKees Cook
Setting non-blocking via a local copy of the jobserver file descriptor is safer than just assuming other reader processes with the same fd open are prepared for it to be non-blocking. Suggested-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Link: https://lore.kernel.org/lkml/44c01043-ab24-b4de-6544-e8efd153e27a@rasmusvillemoes.dk Signed-off-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20191121205929.40371-3-keescook@chromium.org Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2019-11-22docs, parallelism: Fix failure path and add commentKees Cook
Rasmus noted that the failure path didn't correctly exit. Fix this and add another comment about GNU Make's job server environment variable names over time. Reported-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Link: https://lore.kernel.org/lkml/eb25959a-9ec4-3530-2031-d9d716b40b20@rasmusvillemoes.dk Signed-off-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20191121205929.40371-2-keescook@chromium.org Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2019-11-16Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller
Lots of overlapping changes and parallel additions, stuff like that. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-15Merge tag 'arm64-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fix from Will Deacon: "One trivial fix for -rc8/final that ensures that the script used to detect RELR relocation support in the toolchain works correctly when $CC contains quotes. Although it fails safely (by failing to detect the support when it exists), it would be nice to have this fixed in 5.4 given that it was only introduced in the last merge window. Summary: - Handle CC variables containing quotes in tools-support-relr.sh script" * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: scripts/tools-support-relr.sh: un-quote variables
2019-11-15kbuild: move headers_check rule to usr/include/MakefileMasahiro Yamada
Currently, some sanity checks for uapi headers are done by scripts/headers_check.pl, which is wired up to the 'headers_check' target in the top Makefile. It is true compiling headers has better test coverage, but there are still several headers excluded from the compile test. I like to keep headers_check.pl for a while, but we can delete a lot of code by moving the build rule to usr/include/Makefile. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-11-15kbuild: remove header compile testMasahiro Yamada
There are both positive and negative options about this feature. At first, I thought it was a good idea, but actually Linus stated a negative opinion (https://lkml.org/lkml/2019/9/29/227). I admit it is ugly and annoying. The baseline I'd like to keep is the compile-test of uapi headers. (Otherwise, kernel developers have no way to ensure the correctness of the exported headers.) I will maintain a small build rule in usr/include/Makefile. Remove the other header test functionality. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-11-14checkpatch: don't warn about new vsprintf pointer extension '%pe'Uwe Kleine-König
This extension was introduced in commit 57f5677e535b ("printf: add support for printing symbolic error names"). Link: http://lkml.kernel.org/r/20191114100416.23928-1-u.kleine-koenig@pengutronix.de To: Andy Whitcroft <apw@canonical.com> To: Joe Perches <joe@perches.com> To: Andy Shevchenko <andy.shevchenko@gmail.com> Cc: linux-kernel@vger.kernel.org Cc: kernel@pengutronix.de Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> [pmladek@suse.com: Switched the ordering: eE -> Ee] Signed-off-by: Petr Mladek <pmladek@suse.com>
2019-11-13scripts/tools-support-relr.sh: un-quote variablesIlie Halip
When the CC variable contains quotes, e.g. when using ccache (make CC="ccache <compiler>"), this script always fails, so CONFIG_RELR is never enabled, even when the toolchain supports this feature. Removing the /dev/null redirect and invoking the script manually shows the issue: $ CC='/usr/bin/ccache clang' ./scripts/tools-support-relr.sh ./scripts/tools-support-relr.sh: 7: ./scripts/tools-support-relr.sh: /usr/bin/ccache clang: not found Fix this by un-quoting the variables. Before: $ make ARCH=arm64 CC='/usr/bin/ccache clang' LD=ld.lld \ NM=llvm-nm OBJCOPY=llvm-objcopy defconfig $ grep RELR .config CONFIG_ARCH_HAS_RELR=y With this change: $ make ARCH=arm64 CC='/usr/bin/ccache clang' LD=ld.lld \ NM=llvm-nm OBJCOPY=llvm-objcopy defconfig $ grep RELR .config CONFIG_TOOLS_SUPPORT_RELR=y CONFIG_ARCH_HAS_RELR=y CONFIG_RELR=y Fixes: 5cf896fb6be3 ("arm64: Add support for relocating the kernel with RELR relocations") Reported-by: Dmitry Golovin <dima@golovin.in> Reviewed-by: Nathan Chancellor <natechancellor@gmail.com> Reviewed-by: Masahiro Yamada <yamada.masahiro@socionext.com> Link: https://github.com/ClangBuiltLinux/linux/issues/769 Cc: Peter Collingbourne <pcc@google.com> Signed-off-by: Ilie Halip <ilie.halip@gmail.com> Signed-off-by: Will Deacon <will@kernel.org>
2019-11-11kbuild: rename any-prereq to newer-prereqsMasahiro Yamada
GNU Make manual says: $? The names of all the prerequisites that are newer than the target, with spaces between them. To reflect this, rename any-prereq to newer-prereqs, which is clearer and more intuitive. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-11-11kbuild: drop $(wildcard $^) check in if_changed* for faster rebuildMasahiro Yamada
The incremental build of Linux kernel is pretty slow when lots of objects are compiled. The rebuild of allmodconfig may take a few minutes even when none of the objects needs to be rebuilt. The time-consuming part in the incremental build is the evaluation of if_changed* macros since they are used in the recipes to compile C and assembly source files into objects. I notice the following code in if_changed* is expensive: $(filter-out $(PHONY) $(wildcard $^),$^) In the incremental build, every object has its .*.cmd file, which contains the auto-generated list of included headers. So, $^ are expanded into the long list of the source file + included headers, and $(wildcard $^) checks whether they exist. It may not be clear why this check exists there. Here is the record of my research. [1] The first code addition into Kbuild This code dates back to 2002. It is the pre-git era. So, I copy-pasted it from the historical git tree. | commit 4a6db0791528c220655b063cf13fefc8470dbfee (HEAD) | Author: Kai Germaschewski <kai@tp1.ruhr-uni-bochum.de> | Date: Mon Jun 17 00:22:37 2002 -0500 | | kbuild: Handle removed headers | | New and old way to handle dependencies would choke when a file | #include'd by other files was removed, since the dependency on it was | still recorded, but since it was gone, make has no idea what to do about | it (and would complain with "No rule to make <file> ...") | | We now add targets for all the previously included files, so make will | just ignore them if they disappear. | | diff --git a/Rules.make b/Rules.make | index 6ef827d3df39..7db5301ea7db 100644 | --- a/Rules.make | +++ b/Rules.make | @@ -446,7 +446,7 @@ if_changed = $(if $(strip $? \ | # execute the command and also postprocess generated .d dependencies | # file | | -if_changed_dep = $(if $(strip $? \ | +if_changed_dep = $(if $(strip $? $(filter-out FORCE $(wildcard $^),$^)\ | $(filter-out $(cmd_$(1)),$(cmd_$@))\ | $(filter-out $(cmd_$@),$(cmd_$(1)))),\ | @set -e; \ | diff --git a/scripts/fixdep.c b/scripts/fixdep.c | index b5d7bee8efc7..db45bd1888c0 100644 | --- a/scripts/fixdep.c | +++ b/scripts/fixdep.c | @@ -292,7 +292,7 @@ void parse_dep_file(void *map, size_t len) | exit(1); | } | memcpy(s, m, p-m); s[p-m] = 0; | - printf("%s: \\\n", target); | + printf("deps_%s := \\\n", target); | m = p+1; | | clear_config(); | @@ -314,7 +314,8 @@ void parse_dep_file(void *map, size_t len) | } | m = p + 1; | } | - printf("\n"); | + printf("\n%s: $(deps_%s)\n\n", target, target); | + printf("$(deps_%s):\n", target); | } | | void print_deps(void) The "No rule to make <file> ..." error can be solved by passing -MP to the compiler, but I think the detection of header removal is a good feature. When a header is removed, all source files that previously included it should be re-compiled. This makes sure we has correctly got rid of #include directives of it. This is also related with the behavior of $?. The GNU Make manual says: $? The names of all the prerequisites that are newer than the target, with spaces between them. This does not explain whether a non-existent prerequisite is considered to be newer than the target. At this point of time, GNU Make 3.7x was used, where the $? did not include non-existent prerequisites. Therefore, $(filter-out FORCE $(wildcard $^),$^) was useful to detect the header removal, and to rebuild the related objects if it is the case. [2] Change of $? behavior Later, the behavior of $? was changed (fixed) to include prerequisites that did not exist. First, GNU Make commit 64e16d6c00a5 ("Various changes getting ready for the release of 3.81.") changed it, but in the release test of 3.81, it turned out to break the kernel build. See these: - http://lists.gnu.org/archive/html/bug-make/2006-03/msg00003.html - https://savannah.gnu.org/bugs/?16002 - https://savannah.gnu.org/bugs/?16051 Then, GNU Make commit 6d8d9b74d9c5 ("Numerous updates to tests for issues found on Cygwin and Windows.") reverted it for the 3.81 release to give Linux kernel time to adjust to the new behavior. After the 3.81 release, GNU Make commit 7595f38f62af ("Fixed a number of documentation bugs, plus some build/install issues:") re-added it. [3] Adjustment to the new $? behavior on Kbuild side Meanwhile, the kernel build was changed by commit 4f1933620f57 ("kbuild: change kbuild to not rely on incorrect GNU make behavior") to adjust to the new $? behavior. [4] GNU Make 3.82 released in 2010 GNU Make 3.82 was the first release that integrated the correct $? behavior. At this point, Kbuild dealt with GNU Make versions with different $? behaviors. 3.81 or older: $? does not contain any non-existent prerequisite. $(filter-out $(PHONY) $(wildcard $^),$^) was useful to detect removed include headers. 3.82 or newer: $? contains non-existent prerequisites. When a header is removed, it appears in $?. $(filter-out $(PHONY) $(wildcard $^),$^) became a redundant check. With the correct $? behavior, we could have dropped the expensive check for 3.82 or later, but we did not. (Maybe nobody noticed this optimization.) [5] The .SECONDARY special target trips up $? Some time later, I noticed $? did not work as expected under some circumstances. As above, $? should contain non-existent prerequisites, but the ones specified as SECONDARY do not appear in $?. I asked this in GNU Make ML, and it seems a bug: https://lists.gnu.org/archive/html/bug-make/2019-01/msg00001.html Since commit 8e9b61b293d9 ("kbuild: move .SECONDARY special target to Kbuild.include"), all files, including headers listed in .*.cmd files, are treated as secondary. So, we are back into the incorrect $? behavior. If we Kbuild want to react to the header removal, we need to keep $(filter-out $(PHONY) $(wildcard $^),$^) but this makes the rebuild so slow. [Summary] - I believe noticing the header removal and recompiling related objects is a nice feature for the build system. - If $? worked correctly, $(filter-out $(PHONY),$?) would be enough to detect the header removal. - Currently, $? does not work correctly when used with .SECONDARY, and Kbuild is hit by this bug. - I filed a bug report for this, but not fixed yet as of writing. - Currently, the header removal is detected by the following expensive code: $(filter-out $(PHONY) $(wildcard $^),$^) - I do not want to revert commit 8e9b61b293d9 ("kbuild: move .SECONDARY special target to Kbuild.include"). Specifying .SECONDARY globally is clean, and it matches to the Kbuild policy. This commit proactively removes the expensive check since it makes the incremental build faster. A downside is Kbuild will no longer be able to notice the header removal. You can confirm it by the full-build followed by a header removal, and then re-build. $ make defconfig all [ full build ] $ rm include/linux/device.h $ make CALL scripts/checksyscalls.sh CALL scripts/atomic/check-atomics.sh DESCEND objtool CHK include/generated/compile.h Kernel: arch/x86/boot/bzImage is ready (#11) Building modules, stage 2. MODPOST 12 modules Previously, Kbuild noticed a missing header and emits a build error. Now, Kbuild is fine with it. This is an unusual corner-case, not a big deal. Once the $? bug is fixed in GNU Make, everything will work fine. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-11-11modpost: remove unneeded local variable in contains_namespace()Masahiro Yamada
The local variable, ns_entry, is unneeded. While I was here, I also cleaned up the comparison with NULL or 0. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Matthias Maennich <maennich@google.com>
2019-11-11scripts/nsdeps: support nsdeps for external module buildsMasahiro Yamada
scripts/nsdeps is written to take care of only in-tree modules. Perhaps, this is not a bug, but just a design. At least, Documentation/core-api/symbol-namespaces.rst focuses on in-tree modules. Having said that, some people already tried nsdeps for external modules. So, it would be nice to support it. Reported-by: Steve French <smfrench@gmail.com> Reported-by: Jessica Yu <jeyu@kernel.org> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Tested-by: Jessica Yu <jeyu@kernel.org> Acked-by: Jessica Yu <jeyu@kernel.org> Reviewed-by: Matthias Maennich <maennich@google.com> Tested-by: Matthias Maennich <maennich@google.com>
2019-11-11modpost: dump missing namespaces into a single modules.nsdeps fileMasahiro Yamada
The modpost, with the -d option given, generates per-module .ns_deps files. Kbuild generates per-module .mod files to carry module information. This is convenient because Make handles multiple jobs in parallel when the -j option is given. On the other hand, the modpost always runs as a single thread. I do not see a strong reason to produce separate .ns_deps files. This commit changes the modpost to generate just one file, modules.nsdeps, each line of which has the following format: <module_name>: <list of missing namespaces> Please note it contains *missing* namespaces instead of required ones. So, modules.nsdeps is empty if the namespace dependency is all good. This will work more efficiently because spatch will no longer process already imported namespaces. I removed the '(if needed)' from the nsdeps log since spatch is invoked only when needed. This also solves the stale .ns_deps problem reported by Jessica Yu: https://lkml.org/lkml/2019/10/28/467 Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Tested-by: Jessica Yu <jeyu@kernel.org> Acked-by: Jessica Yu <jeyu@kernel.org> Reviewed-by: Matthias Maennich <maennich@google.com> Tested-by: Matthias Maennich <maennich@google.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-21 14:53:04 +0000