summaryrefslogtreecommitdiff
path: root/scripts
AgeCommit message (Collapse)Author
2013-09-06Merge git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tileLinus Torvalds
Pull Tile arch updates from Chris Metcalf: "These changes bring in a bunch of new functionality that has been maintained internally at Tilera over the last year, plus other stray bits of work that I've taken into the tile tree from other folks. The changes include some PCI root complex work, interrupt-driven console support, support for performing fast-path unaligned data fixups by kernel-based JIT code generation, CONFIG_PREEMPT support, vDSO support for gettimeofday(), a serial driver for the tilegx on-chip UART, KGDB support, more optimized string routines, support for ftrace and kprobes, improved ASLR, and many bug fixes. We also remove support for the old TILE64 chip, which is no longer buildable" * git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile: (85 commits) tile: refresh tile defconfig files tile: rework <asm/cmpxchg.h> tile PCI RC: make default consistent DMA mask 32-bit tile: add null check for kzalloc in tile/kernel/setup.c tile: make __write_once a synonym for __read_mostly tile: remove support for TILE64 tile: use asm-generic/bitops/builtin-*.h tile: eliminate no-op "noatomichash" boot argument tile: use standard tile_bundle_bits type in traps.c tile: simplify code referencing hypervisor API addresses tile: change <asm/system.h> to <asm/switch_to.h> in comments tile: mark pcibios_init() as __init tile: check for correct compiler earlier in asm-offsets.c tile: use standard 'generic-y' model for <asm/hw_irq.h> tile: use asm-generic version of <asm/local64.h> tile PCI RC: add comment about "PCI hole" problem tile: remove DEBUG_EXTRA_FLAGS kernel config option tile: add virt_to_kpte() API and clean up and document behavior tile: support FRAME_POINTER tile: support reporting Tilera hypervisor statistics ...
2013-09-04Merge tag 'modules-next-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux Pull module updates from Rusty Russell: "Minor fixes mainly, including a potential use-after-free on remove found by CONFIG_DEBUG_KOBJECT_RELEASE which may be theoretical" * tag 'modules-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux: module: Fix mod->mkobj.kobj potentially freed too early kernel/params.c: use scnprintf() instead of sprintf() kernel/module.c: use scnprintf() instead of sprintf() module/lsm: Have apparmor module parameters work with no args module: Add NOARG flag for ops with param_set_bool_enable_only() set function module: Add flag to allow mod params to have no arguments modules: add support for soft module dependencies scripts/mod/modpost.c: permit '.cranges' secton for sh64 architecture. module: fix sprintf format specifier in param_get_byte()
2013-08-30tile: support ftrace on tilegxTony Lu
This commit adds support for static ftrace, graph function support, and dynamic tracer support. Signed-off-by: Tony Lu <zlu@tilera.com> Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2013-08-20scripts/mod/modpost.c: permit '.cranges' secton for sh64 architecture.Chen Gang
Need permit '.cranges' section for sh64 architecture, or modpost will report warning: LD init/built-in.o WARNING: init/built-in.o (.cranges): unexpected non-allocatable section. Did you forget to use "ax"/"aw" in a .S file? Note that for example <linux/init.h> contains section definitions for use in .S files. Signed-off-by: Chen Gang <gang.chen@asianux.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2013-07-15PTR_RET is now PTR_ERR_OR_ZERO(): Replace most.Rusty Russell
Sweep of the simple cases. Cc: netdev@vger.kernel.org Cc: linuxppc-dev@lists.ozlabs.org Cc: linux-arm-kernel@lists.infradead.org Cc: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Acked-by: David S. Miller <davem@davemloft.net> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-07-10Merge branch 'misc' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild Pull coccinelle updates from Michal Marek: "The misc branch is reserved for Coccinelle this time: - 'report' is the default mode - MAINTAINERS update for Coccinelle - documentation udate - use new option format for spatch(1) - J=<n> variable to mimic make -j for coccicheck - check for missing pci_free_consistent() calls There are some patches for rpm-pkg and deb-pkg waiting for the 3.12-rc1 merge window" * 'misc' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild: Coccinelle: Update information about the minimal version required Coccinelle: Update the options used to the new option scheme scripts: Coccinelle script for pci_free_consistent() Coccinelle: Update the documentation Coccinelle: Update section of MAINTAINERS coccicheck: span checks across CPUs scripts/coccinelle: check for field address argument to kfree Coccinelle: Update the Coccinelle section of MAINTAINERS Coccinelle: Make 'report' the default mode
2013-07-10Merge branch 'kconfig' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild Pull kconfig updates from Michal Marek: - dependency solver fix for make defconfig - randconfig fixes, one of which had to be reverted again - more user-friendly sorting of search results - hex and range keywords support longs - fix for [mn]conf not to rely on particular behavior of the LINES and COLS variables - cleanup of magic constants in kconfig/lxdialog - [mn]conf formatting fixes - fix for scripts/config's help text in out-of-tree usage (under a different name) * 'kconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild: kconfig: allow "hex" and "range" to support longs Revert "kconfig: fix randomising choice entries in presence of KCONFIG_ALLCONFIG" kconfig: fix randomising choice entries in presence of KCONFIG_ALLCONFIG kconfig: loop as long as we changed some symbols in randconfig kconfig/[mn]conf: make it explicit in the search box that a regexp is possible kconfig: sort found symbols by relevance kconfig/conf: print the seed used to initialise the RNG for randconfig kconfig/conf: accept a base-16 seed for randconfig kconfig/conf: fix randconfig setting multiple symbols in a choice scripts/config: replace hard-coded script name by a dynamic value mconf/nconf: mark empty menus/menuconfigs different from non-empty ones nconf: use function calls instead of ncurses' variables LINES and COLS mconf: use function calls instead of ncurses' variables LINES and COLS kconfig/lxdialog: handle newline characters in print_autowrap() kconfig/lxdialog: Use new mininimum resize definitions in conf_choice() kconfig/lxdialog: Add definitions for mininimum (re)size values kconfig: Fix defconfig when one choice menu selects options that another choice menu depends on
2013-07-10Merge branch 'kbuild' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild Pull kbuild updates from Michal Marek: - fix for make headers_install argv explosion with too long path - scripts/setlocalversion does not call git update-index needlessly - fix for the src.rpm produced by make rpm-pkg. The new make image_name can be useful also for other packaging tools. - scripts/mod/devicetable-offsets.o is not rebuilt during each make run - make modules_install dependency fix - scripts/sortextable portability fix - fix for kbuild to generate the output directory for all object files in subdirs. - a couple of minor fixes * 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild: kbuild: create directory for dir/file.o tools/include: use stdint types for user-space byteshift headers Makefile: Fix install error with make -j option Fix a build warning in scripts/mod/file2alias.c improve modalias building scripts/mod: Spelling s/DEVICEVTABLE/DEVICETABLE/ kbuild: fix error when building from src rpm scripts/setlocalversion on write-protected source tree Makefile.lib: align DTB quiet_cmd kbuild: fix make headers_install when path is too long
2013-07-09lib: add support for LZ4-compressed kernelKyungsik Lee
Add support for extracting LZ4-compressed kernel images, as well as LZ4-compressed ramdisk images in the kernel boot process. Signed-off-by: Kyungsik Lee <kyungsik.lee@lge.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Borislav Petkov <bp@alien8.de> Cc: Florian Fainelli <florian@openwrt.org> Cc: Yann Collet <yann.collet.73@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-09checkpatch: make the CamelCase cache work for non-git trees tooJoe Perches
Might as well check include timestamps and cache the include file CamelCase uses for the non-git case too. The camelcase cache file is now named: for git: .checkpatch-camelcase.git.<commit_id> for non-git: .checkpatch-camelcase.date.<YYYYMMDDhhmm> All .checkpatch-camelcase* files are deleted if not current. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-07Merge branch 'cpuinit-delete' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux Pull first stage of __cpuinit removal from Paul Gortmaker: "The two commits here 1) dummy out all the __cpuinit macros so that we no longer generate such sections, and then 2) remove all the section processing that we used to do for those sections. This makes all the __cpuinit and friends no-ops, so that we can remove the use cases of it at our leisure. Expect stage 2, which does the tree wide removal sweep at the end of the merge window." * 'cpuinit-delete' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux: modpost: remove all traces of cpuinit/cpuexit sections init.h: remove __cpuinit sections from the kernel
2013-07-03Merge branch 'akpm' (updates from Andrew Morton)Linus Torvalds
Merge first patch-bomb from Andrew Morton: - various misc bits - I'm been patchmonkeying ocfs2 for a while, as Joel and Mark have been distracted. There has been quite a bit of activity. - About half the MM queue - Some backlight bits - Various lib/ updates - checkpatch updates - zillions more little rtc patches - ptrace - signals - exec - procfs - rapidio - nbd - aoe - pps - memstick - tools/testing/selftests updates * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (445 commits) tools/testing/selftests: don't assume the x bit is set on scripts selftests: add .gitignore for kcmp selftests: fix clean target in kcmp Makefile selftests: add .gitignore for vm selftests: add hugetlbfstest self-test: fix make clean selftests: exit 1 on failure kernel/resource.c: remove the unneeded assignment in function __find_resource aio: fix wrong comment in aio_complete() drivers/w1/slaves/w1_ds2408.c: add magic sequence to disable P0 test mode drivers/memstick/host/r592.c: convert to module_pci_driver drivers/memstick/host/jmb38x_ms: convert to module_pci_driver pps-gpio: add device-tree binding and support drivers/pps/clients/pps-gpio.c: convert to module_platform_driver drivers/pps/clients/pps-gpio.c: convert to devm_* helpers drivers/parport/share.c: use kzalloc Documentation/accounting/getdelays.c: avoid strncpy in accounting tool aoe: update internal version number to v83 aoe: update copyright date aoe: perform I/O completions in parallel ...
2013-07-03rapidio: add udev notificationAlexandre Bounine
Add RapidIO-specific modalias generation to enable udev notifications about RapidIO-specific events. The RapidIO modalias string format is shown below: "rapidio:vNNNNdNNNNavNNNNadNNNN" Where: v - Device Vendor ID (16 bit), d - Device ID (16 bit), av - Assembly Vendor ID (16 bit), ad - Assembly ID (16 bit), as they are reported in corresponding Capability Registers (CARs) of each RapidIO device. Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Li Yang <leoli@freescale.com> Cc: Kumar Gala <galak@kernel.crashing.org> Cc: Andre van Herk <andre.van.herk@Prodrive.nl> Cc: Micha Nelissen <micha.nelissen@Prodrive.nl> Cc: Stef van Os <stef.van.os@Prodrive.nl> Cc: Jean Delvare <jdelvare@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03checkpatch: cache last camelcase hash as .checkpatch-camelcase.<commit>Joe Perches
Add a file to cache the CamelCase variables found by <commit> to reduce the time it takes to scan the include/ directory. Filename is '.checkpatch-camelcase.<commit>' and it is created only only if a .git directory exists. <commit> is determined by the last non-merge commit id in the include/ path. Reduces checkpatch run time by ~12 cpu seconds on my little netbook. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03checkpatch: allow longer logging function namesJacob Keller
The current $logFunction regular expression allows names like dev_warn, e_dbg, netdev_info, etc, but some log functions are now written like e_dev_warn, so allow 1 or 2 word blocks with an underscore before the logging level. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03checkpatch: ignore existing CamelCase uses from include/...Joe Perches
When using --strict, CamelCase uses are described with CHECK: messages. These CamelCase uses may be acceptable and should not generate these messages when the variable is already defined in a file from the include/... path. So, change checkpatch to read all the .h files in include/... and look for preexisting CamelCase #defines, typedefs and function prototypes. Add these to the existing camelcase hash so that any uses in the patch or file can be ignored. There are currently ~3500 files in include/. It takes about 10 cpu seconds on my little netbook to grep for and preseed these existing uses. That's about 4x the time for a similar git grep. This preseeding is only done once when using --strict and only when there is a CamelCase use found. If a .git directory is found, it uses 'git ls-files include' If not, it uses 'find $root/include -name "*.h" Signed-off-by: Joe Perches <joe@perches.com> Cc: Andy Whitcroft <apw@canonical.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03checkpatch: ignore SI unit CamelCase variants like "_uV"Joe Perches
Many existing variable names use SI like variants that should be otherwise obvious and acceptable. Whitelist them from the CamelCase message. Signed-off-by: Joe Perches <joe@perches.com> Suggested-by: Phil Carmody <phil.carmody@partner.samsung.com> Acked-by: Phil Carmody <phil.carmody@partner.samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03checkpatch: move test for space before semicolon after operator spacingJoe Perches
Moving this test allows the --fix option to work better. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03checkpatch: create an EXPERIMENTAL --fix option to correct patchesJoe Perches
Some patches have simple defects in whitespace and formatting that checkpatch could correct automatically. Attempt to do so. Add a --fix option to create a "<inputfile>.EXPERIMENTAL-checkpatch-fixes" file that tries to use normal kernel style for some of these formatting errors. Add warnings against using this file without verifying the changes. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03checkpatch: improve "no space after cast" testJoe Perches
Some false positives exist on this test. For instance: *va_arg(args, signed char *) = val.s; or memset(foo, 0, sizeof(struct bar *) * baz)); Ignore lines that have an arithmetic operator or assignment after what appears to be a cast to a pointer "(foo *)". Add $Arithmetic convenience variable. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03checkpatch: add a --strict test for comparison to true/falseJoe Perches
Comparing to true or false is error prone. Add tests for the various forms of (foo == true) && (false != bar) that are only reported with --strict. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03checkpatch: don't warn on blank lines before/after braces as oftenJoe Perches
Check to make sure the blank lines aren't comment lines like: bool foo(bool bar) { /* Don't warn on a leading comment */ return !bar; /* Don't warn on a trailing comment either */ } Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03checkpatch: add a placeholder to check blank lines before declarationsJoe Perches
Figure out first how to determine if this is in a struct declaration or in a function body before enabling this. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03checkpatch: reduce false positive rate of "complex macros"Joe Perches
Allow "#define foo struct.member" without bleating a warning. This also allows "#define foo bar.baz->qux" and so on. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03checkpatch: warn on comparisons to get_jiffies_64()Joe Perches
Comparing get_jiffies_64() is almost always wrong and time_before64 and time_after64 should be used instead. Warn on any comparison to get_jiffies_64(). Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03checkpatch: warn on comparisons to jiffiesJoe Perches
Comparing jiffies is almost always wrong and time_before and time_after should be used instead. Warn on any comparison to jiffies. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03checkpatch: warn when networking block comment lines don't start with *Joe Perches
Some block comments in network are written as: /* block comment line 1 block comment line 2 */ Emit a warning on the "block comment line 2" because it should be /* block comment line 1 * block comment line 2 */ This warning is only emitted on the second line of a block comment. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03checkpatch: improve network block comment test and messageJoe Perches
Show the first line of the comment after a line with just /* to better show where the defective comment style is in the file. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03checkpatch: remove quote from CamelCase testJoe Perches
Commit be987d9f80 ("checkpatch: improve CamelCase test for Page") added it but it shouldn't be there. Must have been my fault. Make sure that the tested variable doesn't contain a constant. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03checkpatch: add --strict preference for p = kmalloc(sizeof(*p)...Joe Perches
Add another test for memory allocation style to follow Documentation/CodingStyle: Chapter 14: Allocating memory The preferred form for passing a size of a struct is the following: p = kmalloc(sizeof(*p), ...); Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03checkpatch: warn when using gcc's binary constant ("0b") extensionJoe Perches
The gcc extension for binary constants that start with 0b is only supported with gcc version 4.3 or higher. The kernel can still be compiled with earlier versions of gcc, so have checkpatch emit a warning for these constants. Restructure checkpatch's constant finding code a bit to support finding these binary constants. Signed-off-by: Joe Perches <joe@perches.com> Suggested-by: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Whitcroft <apw@canonical.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03checkpatch: change CamelCase test and make it --strictJoe Perches
Do not bleat a message on nominally acceptable CamelCase uses that are separated by an _ like drm_core_has_MTRR. CamelCase tests are also a bit noisy against certain types of code acceptable to some kernel developers. Make the test applicable only with --strict. Signed-off-by: Joe Perches <joe@perches.com> Cc: Andy Whitcroft <apw@canonical.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03Coccinelle: Update information about the minimal version requiredNicolas Palix
The naming convention of options has changed one year ago. The options have been recently updated in the cocci file and in scripts/coccicheck. This patch also adds this information in the documentation. Signed-off-by: Nicolas Palix <nicolas.palix@imag.fr> Signed-off-by: Michal Marek <mmarek@suse.cz>
2013-07-03Coccinelle: Update the options used to the new option schemeNicolas Palix
spatch has changed its option scheme. E.g., --no_show_diff is now --no-show-diff This patch updates: - scripts/coccicheck - Semantic patches under scripts/coccinelle/ Signed-off-by: Nicolas Palix <nicolas.palix@imag.fr> Signed-off-by: Michal Marek <mmarek@suse.cz>
2013-07-03kbuild: create directory for dir/file.o张忠山
When add a obj with dir to obj-y, like this obj-y += dir/file.o The $(obj)/dir not created, this patch fix this. When try to add a file(which in a subdir) to my board's obj-y, the build progress crashed. For example, I use at91rm9200ek board, and in kernel dir run: mkdir objtree make O=objtree at91rm9200_defconfig mkdir arch/arm/mach-at91/dir touch arch/arm/mach-at91/dir/file.c and edit arch/arm/mach-at91/dir/file.c to add some code. then edit arch/arm/mach-at91/Makefile, change the following line: obj-$(CONFIG_MACH_AT91RM9200EK) += board-rm9200ek.o to: obj-$(CONFIG_MACH_AT91RM9200EK) += board-rm9200ek.o dir/file.o Now build it: make O=objtree Then the error appears: ... CC arch/arm/mach-at91/board-rm9200dk.o CC arch/arm/mach-at91/board-rm9200ek.o CC arch/arm/mach-at91/dir/file.o linux-2.6/arch/arm/mach-at91/dir/file.c:5: fatal error: opening dependency file arch/arm/mach-at91/dir/.file.o.d: No such file or directory Check the objtree: LANG=en ls objtree/arch/arm/mach-at91/dir ls: cannot access objtree/arch/arm/mach-at91/dir: No such file or directory It's apparently that the target dir not created for file.o Check kbuild source code. It seems that kbuild create dirs for that in $(obj-dirs). But if the dir need not to create a built-in.o, It should never in $(obj-dirs). So I make this patch to make sure It in $(obj-dirs) this bug caused by commit f5fb976520a53f45f8bbf2e851f16b3b5558d485 Signed-off-by: 张忠山 <zzs0213@gmail.com> Signed-off-by: Michal Marek <mmarek@suse.cz>
2013-07-03Merge tags 'modules-next-for-linus' and 'virtio-next-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux Pull trivial module and virtio fixes from Rusty Russell. Apparently these were meant for 3.10, but came in after the release. * tag 'modules-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux: modpost.c: Add .text.unlikely to TEXT_SECTIONS * tag 'virtio-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux: virtio: remove virtqueue_add_buf(). lguest: rename i386_head.S virtio_blk: Add missing 'static' qualifiers virtio: console: Add emergency writeonly register to config space virtio_pci: better macro exported in uapi
2013-07-03Merge tag 'arm64-upstream' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/cmarinas/linux-aarch64 Pull ARM64 updates from Catalin Marinas: "Main features: - KVM and Xen ports to AArch64 - Hugetlbfs and transparent huge pages support for arm64 - Applied Micro X-Gene Kconfig entry and dts file - Cache flushing improvements For arm64 huge pages support, there are x86 changes moving part of arch/x86/mm/hugetlbpage.c into mm/hugetlb.c to be re-used by arm64" * tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/cmarinas/linux-aarch64: (66 commits) arm64: Add initial DTS for APM X-Gene Storm SOC and APM Mustang board arm64: Add defines for APM ARMv8 implementation arm64: Enable APM X-Gene SOC family in the defconfig arm64: Add Kconfig option for APM X-Gene SOC family arm64/Makefile: provide vdso_install target ARM64: mm: THP support. ARM64: mm: Raise MAX_ORDER for 64KB pages and THP. ARM64: mm: HugeTLB support. ARM64: mm: Move PTE_PROT_NONE bit. ARM64: mm: Make PAGE_NONE pages read only and no-execute. ARM64: mm: Restore memblock limit when map_mem finished. mm: thp: Correct the HPAGE_PMD_ORDER check. x86: mm: Remove general hugetlb code from x86. mm: hugetlb: Copy general hugetlb code from x86 to mm. x86: mm: Remove x86 version of huge_pmd_share. mm: hugetlb: Copy huge_pmd_share from x86 to mm. arm64: KVM: document kernel object mappings in HYP arm64: KVM: MAINTAINERS update arm64: KVM: userspace API documentation arm64: KVM: enable initialization of a 32bit vcpu ...
2013-07-03scripts: Coccinelle script for pci_free_consistent()strnape1@fel.cvut.cz
Created coccinelle script for reporting missing pci_free_consistent() calls. Signed-off-by: Petr Strnad <strnape1@fel.cvut.cz> Signed-off-by: Nicolas Palix <nicolas.palix@imag.fr> Signed-off-by: Michal Marek <mmarek@suse.cz>
2013-07-03coccicheck: span checks across CPUsKees Cook
This adds parallelism by default to the "coccicheck" target using spatch's "-max" and "-index" arguments. Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Nicolas Palix <nicolas.palix@imag.fr> Signed-off-by: Michal Marek <mmarek@suse.cz>
2013-07-03Fix a build warning in scripts/mod/file2alias.cDaniel Tang
On some systems, __used is already defined in sys/cdefs.h and causes a build warning: scripts/mod/file2alias.c:85:1: warning: "__used" redefined In file included from /usr/include/stdio.h:64, from scripts/mod/modpost.h:1, from scripts/mod/file2alias.c:13: /usr/include/sys/cdefs.h:146:1: warning: this is the location of the previous definition This adds an extra check before defining the __used macro to see if the macro was already defined elsewhere. Signed-off-by: Daniel Tang <dt.tangr@gmail.com> Signed-off-by: Michal Marek <mmarek@suse.cz>
2013-06-29kconfig: allow "hex" and "range" to support longsKees Cook
The parsing routines for Kconfig files use strtol(), but store and render values as int. Switch types and formating to long to support a wider range of values. For example, 0x80000000 wasn't representable. Signed-off-by: Kees Cook <keescook@chromium.org> Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr> Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr> Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
2013-06-28improve modalias buildingJan Beulich
For one, there's no point in the respective pieces to be rebuilt unconditionally on each and every rebuild. Second there's no need to invent a custom rule for generating the .s file from the .c source - we can simply use the generic rule here. And finally, $(obj) should be used to refer to files in the build tree (rather than spelling out the subdirectory). Signed-off-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: Michal Marek <mmarek@suse.cz>
2013-06-28scripts/mod: Spelling s/DEVICEVTABLE/DEVICETABLE/Geert Uytterhoeven
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Michal Marek <mmarek@suse.cz>
2013-06-26modpost: remove all traces of cpuinit/cpuexit sectionsPaul Gortmaker
Delete all audit rules that were checking how the .cpuXYZ related sections were inter-operating with other __init like sections, now that __cpuinit is gone. Update the linker script to not have any knowledge of .cpuinit sections. [lds.h update courtesy of Ralf Baechle <ralf@linux-mips.org>] Cc: Arnd Bergmann <arnd@arndb.de> Cc: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2013-06-26Revert "kconfig: fix randomising choice entries in presence of ↵Yann E. MORIN
KCONFIG_ALLCONFIG" This reverts commit 8357b48549e17b3e4e402c7f977b65708922e60f. It breaks more stuff than it fixes. Reported-by: Fengguang Wu <fengguang.wu@intel.com> Reported-by: Sedat Dilek <sedat.dilek@gmail.com> Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr> Cc: Fengguang Wu <fengguang.wu@intel.com> Cc: Sedat Dilek <sedat.dilek@gmail.com> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Alexandre Bounine <alexandre.bounine@idt.com> Cc: Matt Porter <mporter@kernel.crashing.org> Signed-off-by: Michal Marek <mmarek@suse.cz>
2013-06-24kconfig: fix randomising choice entries in presence of KCONFIG_ALLCONFIGYann E. MORIN
Currently, randconfig does randomise choice entries, unless KCONFIG_ALLCONFIG is specified. For example, given those two files (Thomas' test-case): ---8<--- Config.test.in config OPTIONA bool "Option A" choice prompt "This is a choice" config CHOICE_OPTIONA bool "Choice Option A" config CHOICE_OPTIONB bool "Choice Option B" endchoice config OPTIONB bool "Option B" ---8<--- Config.test.in ---8<--- config.defaults CONFIG_OPTIONA=y ---8<--- config.defaults And running: ./scripts/kconfig/conf --randconfig Config.test.in does properly randomise the two choice symbols (and the two booleans). However, running: KCONFIG_ALLCONFIG=config.defaults \ ./scripts/kconfig/conf --randconfig Config.test.in does *not* reandomise the two choice entries, and only CHOICE_OPTIONA will ever be selected. (OPTIONA will always be set (expected), and OPTIONB will be be properly randomised (expected).) This patch defers setting that a choice has a value until a symbol for that choice is indeed set, so that choices are properly randomised when KCONFIG_ALLCONFIG is set, but not if a symbol for that choice is set. Reported-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr> Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Cc: Michal Marek <mmarek@suse.cz> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Sedat Dilek <sedat.dilek@gmail.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Stephen Rothwell <sfr@canb.auug.org.au> --- Changes v3 -> v4 - fix previous issue where some choices would not be set, which would cause silentoldconfig to ask for them and was then breaking this workflow (as reported by Arnd and Sedat): KCONFIG_ALLCONFIG=foo.defconfig make randconfig make silentoldconfig </dev/nullo which I have tested (3h28min!) with: touch defconfig for(( i=0; i<10000; i++ )); do KCONFIG_ALLCONFIG=$(pwd)/defconfig make randconfig >/dev/null 2>&1 make silentoldconfig </dev/null >/dev/null 2>&1 || break done which did not break at all. - change done in v3 (below) is already fixed by a previous patch Changes v2 -> v3 - ensure only one symbol is set in a choice Changes v1 -> v2: - further postpone setting that a choice has a value until one is indeed set - do not print symbols that are part of an invisible choice
2013-06-24kconfig: loop as long as we changed some symbols in randconfigYann E. MORIN
Because of choice-in-a-choice constructs, it can happen that not all symbols are assigned a value during randconfig, leading in rare cases to this situation: ---8<--- choice-in-choice.in choice bool "A/B/C" config A bool "A" config B bool "B" if B choice bool "E/F" config E bool "E" config F bool "F" endchoice endif # B config C bool "C" endchoice ---8<--- $ ./scripts/kconfig/conf --randconfig choice-in-choice.in [--SNIP--] $ ./scripts/kconfig/conf --silentoldconfig choice-in-choice.in </dev/null [--SNIP--] A/B/C 1. A (A) > 2. B (B) 3. C (C) choice[1-3]: 2 E/F > 1. E (E) (NEW) 2. F (F) (NEW) choice[1-2]: aborted! Console input/output is redirected. Run 'make oldconfig' to update configuration. Fix this by looping in randconfig for as long as some symbol gets assigned a value. Note: this was spotted with the USB EHCI Debug Device Gadget (USB_G_DBGP), which uses this choice-in-a-choice construct, and exhibits this problem. The example above is just a stripped-down minimalist test-case. Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
2013-06-24kconfig/[mn]conf: make it explicit in the search box that a regexp is possibleYann E. MORIN
Reported-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr> Cc: Jean Delvare <jdelvare@suse.de> Cc: Michal Marek <mmarek@suse.cz>
2013-06-24kconfig: sort found symbols by relevanceYann E. MORIN
When searching for symbols, return the symbols sorted by relevance. Sorting is done as thus: - first, symbols that match exactly - then, alphabetical sort Since the search can be a regexp, it is possible that more than one symbol matches exactly. In this case, we can't decide which to sort first, so we fallback to alphabeticall sort. Explain this (new!) sorting heuristic in the documentation. Reported-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr> Cc: Jean Delvare <jdelvare@suse.de> Cc: Michal Marek <mmarek@suse.cz> Cc: Roland Eggner <edvx1@systemanalysen.net> Cc: Wang YanQing <udknight@gmail.com> -- Changes v1->v2: - drop the previous, complex heuristic in favour of a simpler heuristic that is both easier to understand, *and* to maintain (Jean) - explain sorting heuristic in the doc (Jean)
2013-06-24kbuild: fix error when building from src rpmMike Marciniszyn
The following issue can be reproduced with Linus' tree on an x86_64 server. >+ cp /home/user/rpmbuild-test/BUILDROOT/kernel-3.9.2.x86_64/boot/vmlinuz-3.9.2 >cp: missing destination file operand after >/home/user/rpmbuild-test/BUILDROOT/kernel-3.9.2-1.x86_64/boot/vmlinuz-3.9.2' >Try `cp --help' for more information. >error: Bad exit status from /var/tmp/rpm-tmp.R4o0iI (%install) Here are the commands to reproduce: make defconfig make rpm-pkg Use the resulting src rpm to build as follows: mkdir ~/rpmbuild-test cd ~/rpmbuild-test rpmbuild --rebuild --define "_topdir `pwd`" -vv ~/rpmbuild/SRPMS/kernel-3.10.0_rc1+-1.src.rpm The issue is because the %install script uses $KBUILD_IMAGE and it hasn't been set since it is only available in the kbuild system and not in the %install script. This patch adds a Makefile target to emit the image_name that can be used and modifies the mkspec to use the dynamic name in %install. Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Michal Marek <mmarek@suse.cz>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-15 11:59:12 +0000