| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx
Pull SPDX updates from Greg KH:
"Here are three SPDX patches for 5.7-rc1.
One fixes up the SPDX tag for a single driver, while the other two go
through the tree and add SPDX tags for all of the .gitignore files as
needed.
Nothing too complex, but you will get a merge conflict with your
current tree, that should be trivial to handle (one file modified by
two things, one file deleted.)
All three of these have been in linux-next for a while, with no
reported issues other than the merge conflict"
* tag 'spdx-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx:
ASoC: MT6660: make spdxcheck.py happy
.gitignore: add SPDX License Identifier
.gitignore: remove too obvious comments
|
|
Add SPDX License Identifier to all .gitignore files.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Some .gitignore files have comments like "Generated files",
"Ignore generated files" at the header part, but they are
too obvious.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Remove initial SIDs that have never been used or are no longer used by
the kernel from its string table, which is also used to generate the
SECINITSID_* symbols referenced in code. Update the code to
gracefully handle the fact that these can now be NULL. Stop treating
it as an error if a policy defines additional initial SIDs unknown to
the kernel. Do not load unused initial SID contexts into the sidtab.
Fix the incorrect usage of the name from the ocontext in error
messages when loading initial SIDs since these are not presently
written to the kernel policy and are therefore always NULL.
After this change, it is possible to safely reclaim and reuse some of
the unused initial SIDs without compatibility issues. Specifically,
unused initial SIDs that were being assigned the same context as the
unlabeled initial SID in policies can be reclaimed and reused for
another purpose, with existing policies still treating them as having
the unlabeled context and future policies having the option of mapping
them to a more specific context. For example, this could have been
used when the infiniband labeling support was introduced to define
initial SIDs for the default pkey and endport SIDs similar to the
handling of port/netif/node SIDs rather than always using
SECINITSID_UNLABELED as the default.
The set of safely reclaimable unused initial SIDs across all known
policies is igmp_packet (13), icmp_socket (14), tcp_socket (15), kmod
(24), policy (25), and scmp_packet (26); these initial SIDs were
assigned the same context as unlabeled in all known policies including
mls. If only considering non-mls policies (i.e. assuming that mls
users always upgrade policy with their kernels), the set of safely
reclaimable unused initial SIDs further includes file_labels (6), init
(7), sysctl_modprobe (16), and sysctl_fs (18) through sysctl_dev (23).
Adding new initial SIDs beyond SECINITSID_NUM to policy unfortunately
became a fatal error in commit 24ed7fdae669 ("selinux: use separate
table for initial SID lookup") and even before that it could cause
problems on a policy reload (collision between the new initial SID and
one allocated at runtime) ever since commit 42596eafdd75 ("selinux:
load the initial SIDs upon every policy load") so we cannot safely
start adding new initial SIDs to policies beyond SECINITSID_NUM (27)
until such a time as all such kernels do not need to be supported and
only those that include this commit are relevant. That is not a big
deal since we haven't added a new initial SID since 2004 (v2.6.7) and
we have plenty of unused ones we can reclaim if we truly need one.
If we want to avoid the wasted storage in initial_sid_to_string[]
and/or sidtab->isids[] for the unused initial SIDs, we could introduce
an indirection between the kernel initial SID values and the policy
initial SID values and just map the policy SID values in the ocontexts
to the kernel values during policy_load_isids(). Originally I thought
we'd do this by preserving the initial SID names in the kernel policy
and creating a mapping at load time like we do for the security
classes and permissions but that would require a new kernel policy
format version and associated changes to libsepol/checkpolicy and I'm
not sure it is justified. Simpler approach is just to create a fixed
mapping table in the kernel from the existing fixed policy values to
the kernel values. Less flexible but probably sufficient.
A separate selinux userspace change was applied in
https://github.com/SELinuxProject/selinux/commit/8677ce5e8f592950ae6f14cea1b68a20ddc1ac25
to enable removal of most of the unused initial SID contexts from
policies, but there is no dependency between that change and this one.
That change permits removing all of the unused initial SID contexts
from policy except for the fs and sysctl SID contexts. The initial
SID declarations themselves would remain in policy to preserve the
values of subsequent ones but the contexts can be dropped. If/when
the kernel decides to reuse one of them, future policies can change
the name and start assigning a context again without breaking
compatibility.
Here is how I would envision staging changes to the initial SIDs in a
compatible manner after this commit is applied:
1. At any time after this commit is applied, the kernel could choose
to reclaim one of the safely reclaimable unused initial SIDs listed
above for a new purpose (i.e. replace its NULL entry in the
initial_sid_to_string[] table with a new name and start using the
newly generated SECINITSID_name symbol in code), and refpolicy could
at that time rename its declaration of that initial SID to reflect its
new purpose and start assigning it a context going
forward. Existing/old policies would map the reclaimed initial SID to
the unlabeled context, so that would be the initial default behavior
until policies are updated. This doesn't depend on the selinux
userspace change; it will work with existing policies and userspace.
2. In 6 months or so we'll have another SELinux userspace release that
will include the libsepol/checkpolicy support for omitting unused
initial SID contexts.
3. At any time after that release, refpolicy can make that release its
minimum build requirement and drop the sid context statements (but not
the sid declarations) for all of the unused initial SIDs except for
fs and sysctl, which must remain for compatibility on policy
reload with old kernels and for compatibility with kernels that were
still using SECINITSID_SYSCTL (< 2.6.39). This doesn't depend on this
kernel commit; it will work with previous kernels as well.
4. After N years for some value of N, refpolicy decides that it no
longer cares about policy reload compatibility for kernels that
predate this kernel commit, and refpolicy drops the fs and sysctl
SID contexts from policy too (but retains the declarations).
5. After M years for some value of M, the kernel decides that it no
longer cares about compatibility with refpolicies that predate step 4
(dropping the fs and sysctl SIDs), and those two SIDs also become
safely reclaimable. This step is optional and need not ever occur unless
we decide that the need to reclaim those two SIDs outweighs the
compatibility cost.
6. After O years for some value of O, refpolicy decides that it no
longer cares about policy load (not just reload) compatibility for
kernels that predate this kernel commit, and both kernel and refpolicy
can then start adding and using new initial SIDs beyond 27. This does
not depend on the previous change (step 5) and can occur independent
of it.
Fixes: https://github.com/SELinuxProject/selinux-kernel/issues/12
Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
In old days, the "host-progs" syntax was used for specifying host
programs. It was renamed to the current "hostprogs-y" in 2004.
It is typically useful in scripts/Makefile because it allows Kbuild to
selectively compile host programs based on the kernel configuration.
This commit renames like follows:
always -> always-y
hostprogs-y -> hostprogs
So, scripts/Makefile will look like this:
always-$(CONFIG_BUILD_BIN2C) += ...
always-$(CONFIG_KALLSYMS) += ...
...
hostprogs := $(always-y) $(always-m)
I think this makes more sense because a host program is always a host
program, irrespective of the kernel configuration. We want to specify
which ones to compile by CONFIG options, so always-y will be handier.
The "always", "hostprogs-y", "hostprogs-m" will be kept for backward
compatibility for a while.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 of the license or at
your option any later version this program is distributed in the
hope that it will be useful but without any warranty without even
the implied warranty of merchantability or fitness for a particular
purpose see the gnu general public license for more details you
should have received a copy of the gnu general public license along
with this program if not write to the free software foundation inc
59 temple place suite 330 boston ma 02111 1307 usa
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-or-later
has been chosen to replace the boilerplate/reference in 1334 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Richard Fontana <rfontana@redhat.com>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070033.113240726@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add SPDX license identifiers to all Make/Kconfig files which:
- Have no license information of any form
These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:
GPL-2.0-only
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
We need to add the object tree include directory to the include path
for building mdp in order to pick up generated/autoconf.h. Otherwise,
make O=/path/to/objtree breaks.
Fixes: e37c1877ba5b ("scripts/selinux: modernize mdp")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
When compiling genheaders and mdp from a newer host kernel, the
following error happens:
In file included from scripts/selinux/genheaders/genheaders.c:18:
./security/selinux/include/classmap.h:238:2: error: #error New
address family defined, please update secclass_map. #error New
address family defined, please update secclass_map. ^~~~~
make[3]: *** [scripts/Makefile.host:107:
scripts/selinux/genheaders/genheaders] Error 1 make[2]: ***
[scripts/Makefile.build:599: scripts/selinux/genheaders] Error 2
make[1]: *** [scripts/Makefile.build:599: scripts/selinux] Error 2
make[1]: *** Waiting for unfinished jobs....
Instead of relying on the host definition, include linux/socket.h in
classmap.h to have PF_MAX.
Signed-off-by: Paulo Alcantara <paulo@paulo.ac>
Acked-by: Stephen Smalley <sds@tycho.nsa.gov>
[PM: manually merge in mdp.c, subject line tweaks]
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
Derived in part from a patch by Dominick Grift.
The MDP example no longer works on modern systems. Fix it.
While we are at it, add MLS support and enable it.
NB This still does not work on systems using dbus-daemon instead of
dbus-broker because dbus-daemon does not yet gracefully handle unknown
classes/permissions. This appears to be a deficiency in libselinux's
selinux_set_mapping() interface and underlying implementation,
which was never fully updated to deal with unknown classes/permissions
unlike the kernel. The same problem also occurs with XSELinux.
Programs that instead use selinux_check_access() like dbus-broker
should not have this problem.
Changes to mdp:
Add support for devtmpfs, required by modern Linux distributions.
Add MLS support, with sample sensitivities, categories, and constraints.
Generate fs_use and genfscon rules based on kernel configuration.
Update list of filesystem types for fs_use and genfscon rules.
Use object_r for object contexts.
Changes to install_policy.sh:
Bail immediately on any errors.
Provide more helpful error messages when unable to find userspace tools.
Refuse to run if SELinux is already enabled.
Unconditionally move aside /etc/selinux/config and create a new one.
Build policy with -U allow so that userspace object managers do not break.
Build policy with MLS enabled by default.
Create seusers, failsafe_context, and default_contexts for use by
pam_selinux / libselinux.
Create x_contexts for the SELinux X extension.
Create virtual_domain_context and virtual_image_context for libvirtd.
Set to permissive mode rather than enforcing to permit initial autorelabel.
Update the list of filesystem types to be relabeled.
Write -F to /.autorelabel to cause a forced autorelabel on reboot.
Drop broken attempt to relabel the /dev mountpoint directory.
Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov>
Acked-by: Dominick Grift <dominick.grift@defensec.nl>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
Please, use at least K&R C; printf had been able to left-adjust
a field for as long as stdio existed and use of '*' for variable
width had been there since v7. Yes, the first edition of K&R
didn't cover the latter feature (it slightly predates v7), but
you are using a much later feature of the language than that -
in K&R C
static char *stoupperx(const char *s)
{
...
}
would've been spelled as
static char *stoupperx(s)
char *s;
{
...
}
While we are at it, the use of strstr() is bogus - it finds the
_first_ instance of substring, so it's a lousy fit for checking
if a string ends with given suffix...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
The Lustre filesystem has been in the kernel tree for over 5 years now.
While it has been an endless source of enjoyment for new kernel
developers learning how to do basic codingstyle cleanups, as well as an
semi-entertaining source of bewilderment from the vfs developers any
time they have looked into the codebase to try to figure out how to port
their latest api changes to this filesystem, it has not really moved
forward into the "this is in shape to get out of staging" despite many
half-completed attempts.
And getting code out of staging is the main goal of that portion of the
kernel tree. Code should not stagnate and it feels like having this
code in staging is only causing the development cycle of the filesystem
to take longer than it should. There is a whole separate out-of-tree
copy of this codebase where the developers work on it, and then random
changes are thrown over the wall at staging at some later point in time.
This dual-tree development model has never worked, and the state of this
codebase is proof of that.
So, let's just delete the whole mess. Now the lustre developers can go
off and work in their out-of-tree codebase and not have to worry about
providing valid changelog entries and breaking their patches up into
logical pieces. They can take the time they have spend doing those
types of housekeeping chores and get the codebase into a much better
shape, and it can be submitted for inclusion into the real part of the
kernel tree when ready.
Cc: Oleg Drokin <oleg.drokin@intel.com>
Cc: Andreas Dilger <andreas.dilger@intel.com>
Cc: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
"One of the most remarkable improvements in this cycle is, Kbuild is
now able to cache the result of shell commands. Some variables are
expensive to compute, for example, $(call cc-option,...) invokes the
compiler. It is not efficient to redo this computation every time,
even when we are not actually building anything. Kbuild creates a
hidden file ".cache.mk" that contains invoked shell commands and their
results. The speed-up should be noticeable.
Summary:
- Fix arch build issues (hexagon, sh)
- Clean up various Makefiles and scripts
- Fix wrong usage of {CFLAGS,LDFLAGS}_MODULE in arch Makefiles
- Cache variables that are expensive to compute
- Improve cc-ldopton and ld-option for Clang
- Optimize output directory creation"
* tag 'kbuild-v4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (30 commits)
kbuild: move coccicheck help from scripts/Makefile.help to top Makefile
sh: decompressor: add shipped files to .gitignore
frv: .gitignore: ignore vmlinux.lds
selinux: remove unnecessary assignment to subdir-
kbuild: specify FORCE in Makefile.headersinst as .PHONY target
kbuild: remove redundant mkdir from ./Kbuild
kbuild: optimize object directory creation for incremental build
kbuild: create object directories simpler and faster
kbuild: filter-out PHONY targets from "targets"
kbuild: remove redundant $(wildcard ...) for cmd_files calculation
kbuild: create directory for make cache only when necessary
sh: select KBUILD_DEFCONFIG depending on ARCH
kbuild: fix linker feature test macros when cross compiling with Clang
kbuild: shrink .cache.mk when it exceeds 1000 lines
kbuild: do not call cc-option before KBUILD_CFLAGS initialization
kbuild: Cache a few more calls to the compiler
kbuild: Add a cache for generated variables
kbuild: add forward declaration of default target to Makefile.asm-generic
kbuild: remove KBUILD_SUBDIR_ASFLAGS and KBUILD_SUBDIR_CCFLAGS
hexagon/kbuild: replace CFLAGS_MODULE with KBUILD_CFLAGS_MODULE
...
|
|
Makefile.clean descends into $(subdir-y). Dummy assignment to subdir-
is meaningless.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Paul Moore <paul@paul-moore.com>
|
|
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Ensure that genheaders fails with an error if too many permissions
are defined in a class to fit within an access vector. This is similar
to a check performed by checkpolicy when compiling the policy.
Also, fix the suffix on the permission constants generated by this program.
Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
Adjusts for ReST markup and moves under LSM admin guide.
Cc: Paul Moore <paul@paul-moore.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
Compiling with clang and -Wundef makes the compiler report a usage of
undefined PF_MAX macro in security/selinux/include/classmap.h:
In file included from scripts/selinux/mdp/mdp.c:48:
security/selinux/include/classmap.h:37:31: warning: no previous
extern declaration for non-static variable 'secclass_map'
[-Wmissing-variable-declarations]
struct security_class_mapping secclass_map[] = {
^
security/selinux/include/classmap.h:235:5: error: 'PF_MAX' is not
defined, evaluates to 0 [-Werror,-Wundef]
#if PF_MAX > 43
^
In file included from scripts/selinux/genheaders/genheaders.c:17:
security/selinux/include/classmap.h:37:31: warning: no previous
extern declaration for non-static variable 'secclass_map'
[-Wmissing-variable-declarations]
struct security_class_mapping secclass_map[] = {
^
security/selinux/include/classmap.h:235:5: error: 'PF_MAX' is not
defined, evaluates to 0 [-Werror,-Wundef]
#if PF_MAX > 43
^
PF_MAX is defined in include/linux/socket.h but not in
include/uapi/linux/socket.h. Therefore host programs have to rely on the
definition from libc's /usr/include/bits/socket.h, included by
<sys/socket.h>.
Fix the issue by using sys/socket.h in mdp and genheaders. When
classmap.h is included by security/selinux/avc.c, it uses the kernel
definition of PF_MAX, which makes the test consistent.
Signed-off-by: Nicolas Iooss <nicolas.iooss@m4x.org>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
Commit 3322d0d64f4e ("selinux: keep SELinux in sync with new capability
definitions") added a check on the defined capabilities without
explicitly including the capability header file which caused problems
when building genheaders for users of clang/llvm. Resolve this by
using the kernel headers when building genheaders, which is arguably
the right thing to do regardless, and explicitly including the
kernel's capability.h header file in classmap.h. We also update the
mdp build, even though it wasn't causing an error we really should
be using the headers from the kernel we are building.
Reported-by: Nicolas Iooss <nicolas.iooss@m4x.org>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
This fixes the compilation of policy generated by mdp with the recent
version of checkpolicy.
Signed-off-by: Laurent Bigonville <bigon@bigon.be>
Acked-by: Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: Paul Moore <pmoore@redhat.com>
|
|
The Makefiles call the respective interpreter explicitly, but this makes
it easier to use the scripts manually.
Signed-off-by: Michal Marek <mmarek@suse.cz>
|
|
|
|
Files added to hostprogs-y are cleaned. (See scripts/Makefile.clean)
Adding them to clean-files is redundant.
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Acked-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Paul Moore <pmoore@redhat.com>
|
|
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
|
|
move LSM-, credentials-, and keys-related files from Documentation/
to Documentation/security/,
add Documentation/security/00-INDEX, and
update all occurrences of Documentation/<moved_file>
to Documentation/security/<moved_file>.
|
|
The security_is_socket_class() is auto-generated by genheaders based
on classmap.h to reduce maintenance effort when a new class is defined
in SELinux kernel. The name for any socket class should be suffixed by
"socket" and doesn't contain more than one substr of "socket".
Signed-off-by: Harry Ciao <qingtao.cao@windriver.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
Acked-by: Stephen Smalley <sds@tycho.nsa.gov>
|
|
Fix const warning in the genheaders script as a result of
changes to the headers, as noted here:
http://linux.derkeiler.com/Mailing-Lists/Kernel/2010-03/msg03977.html
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: James Morris <jmorris@namei.org>
|
|
If a permission name is long enough the selinux class definition generation
tool will go into a infinite loop. This is because it's macro max() is
fooled into thinking it is dealing with unsigned numbers. This patch makes
sure the macro always uses signed number so 1 > -1.
Signed-off-by: Eric Paris <eparis@redhat.com>
Signed-off-by: James Morris <jmorris@namei.org>
|
|
scripts/selinux/genheaders/genheaders.c:20: warning: no previous prototype
for ?usage?
scripts/selinux/genheaders/genheaders.c:26: warning: no previous prototype
for ?stoupperx?
Signed-off-by: Alan Cox <alan@linux.intel.com>
Acked-by: WANG Cong <xiyou.wangcong@gmail.com>
Signed-off-by: James Morris <jmorris@namei.org>
|
|
The SELinux dynamic class work in c6d3aaa4e35c71a32a86ececacd4eea7ecfc316c
creates a number of dynamic header files and scripts. Add .gitignore files
so git doesn't complain about these.
Signed-off-by: Eric Paris <eparis@redhat.com>
Acked-by: Stephen D. Smalley <sds@tycho.nsa.gov>
Signed-off-by: James Morris <jmorris@namei.org>
|
|
Add a simple utility (scripts/selinux/genheaders) and invoke it to
generate the kernel-private class and permission indices in flask.h
and av_permissions.h automatically during the kernel build from the
security class mapping definitions in classmap.h. Adding new kernel
classes and permissions can then be done just by adding them to classmap.h.
Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: James Morris <jmorris@namei.org>
|
|
Modify SELinux to dynamically discover class and permission values
upon policy load, based on the dynamic object class/perm discovery
logic from libselinux. A mapping is created between kernel-private
class and permission indices used outside the security server and the
policy values used within the security server.
The mappings are only applied upon kernel-internal computations;
similar mappings for the private indices of userspace object managers
is handled on a per-object manager basis by the userspace AVC. The
interfaces for compute_av and transition_sid are split for kernel
vs. userspace; the userspace functions are distinguished by a _user
suffix.
The kernel-private class indices are no longer tied to the policy
values and thus do not need to skip indices for userspace classes;
thus the kernel class index values are compressed. The flask.h
definitions were regenerated by deleting the userspace classes from
refpolicy's definitions and then regenerating the headers. Going
forward, we can just maintain the flask.h, av_permissions.h, and
classmap.h definitions separately from policy as they are no longer
tied to the policy values. The next patch introduces a utility to
automate generation of flask.h and av_permissions.h from the
classmap.h definitions.
The older kernel class and permission string tables are removed and
replaced by a single security class mapping table that is walked at
policy load to generate the mapping. The old kernel class validation
logic is completely replaced by the mapping logic.
The handle unknown logic is reworked. reject_unknown=1 is handled
when the mappings are computed at policy load time, similar to the old
handling by the class validation logic. allow_unknown=1 is handled
when computing and mapping decisions - if the permission was not able
to be mapped (i.e. undefined, mapped to zero), then it is
automatically added to the allowed vector. If the class was not able
to be mapped (i.e. undefined, mapped to zero), then all permissions
are allowed for it if allow_unknown=1.
avc_audit leverages the new security class mapping table to lookup the
class and permission names from the kernel-private indices.
The mdp program is updated to use the new table when generating the
class definitions and allow rules for a minimal boot policy for the
kernel. It should be noted that this policy will not include any
userspace classes, nor will its policy index values for the kernel
classes correspond with the ones in refpolicy (they will instead match
the kernel-private indices).
Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: James Morris <jmorris@namei.org>
|
|
Signed-off-by: Trevor Keith <tsrk@tsrk.net>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Add gitignore file for scripts/selinux/mdp/mdp.
Signed-off-by: James Morris <jmorris@namei.org>
|
|
In August 2006 I posted a patch generating a minimal SELinux policy. This
week, David P. Quigley posted an updated version of that as a patch against
the kernel. It also had nice logic for auto-installing the policy.
Following is David's original patch intro (preserved especially
bc it has stats on the generated policies):
se interested in the changes there were only two significant
changes. The first is that the iteration through the list of classes
used NULL as a sentinel value. The problem with this is that the
class_to_string array actually has NULL entries in its table as place
holders for the user space object classes.
The second change was that it would seem at some point the initial sids
table was NULL terminated. This is no longer the case so that iteration
has to be done on array length instead of looking for NULL.
Some statistics on the policy that it generates:
The policy consists of 523 lines which contain no blank lines. Of those
523 lines 453 of them are class, permission, and initial sid
definitions. These lines are usually little to no concern to the policy
developer since they will not be adding object classes or permissions.
Of the remaining 70 lines there is one type, one role, and one user
statement. The remaining lines are broken into three portions. The first
group are TE allow rules which make up 29 of the remaining lines, the
second is assignment of labels to the initial sids which consist of 27
lines, and file system labeling statements which are the remaining 11.
In addition to the policy.conf generated there is a single file_contexts
file containing two lines which labels the entire system with base_t.
This policy generates a policy.23 binary that is 7920 bytes.
(then a few versions later...):
The new policy is 587 lines (stripped of blank lines) with 476 of those
lines being the boilerplate that I mentioned last time. The remaining
111 lines have the 3 lines for type, user, and role, 70 lines for the
allow rules (one for each object class including user space object
classes), 27 lines to assign types to the initial sids, and 11 lines for
file system labeling. The policy binary is 9194 bytes.
Changelog:
Aug 26: Added Documentation/SELinux.txt
Aug 26: Incorporated a set of comments by Stephen Smalley:
1. auto-setup SELINUXTYPE=dummy
2. don't auto-install if selinux is enabled with
non-dummy policy
3. don't re-compute policy version
4. /sbin/setfiles not /usr/sbin/setfiles
Aug 22: As per JMorris comments, made sure make distclean
cleans up the mdp directory.
Removed a check for file_contexts which is now
created in the same file as the check, making it
superfluous.
Signed-off-by: Serge Hallyn <serue@us.ibm.com>
Signed-off-by: David Quigley <dpquigl@tycho.nsa.gov>
Signed-off-by: James Morris <jmorris@namei.org>
|
