| Age | Commit message (Collapse) | Author |
|---|
|
Signed-off-by: Boris Barbulovski <bbarbulovski@gmail.com>
Signed-off-by: Thiago Macieira <thiago.macieira@intel.com>
Signed-off-by: Michal Marek <mmarek@suse.com>
|
|
Signed-off-by: Boris Barbulovski <bbarbulovski@gmail.com>
Signed-off-by: Thiago Macieira <thiago.macieira@intel.com>
Signed-off-by: Michal Marek <mmarek@suse.com>
|
|
Signed-off-by: Boris Barbulovski <bbarbulovski@gmail.com>
Signed-off-by: Thiago Macieira <thiago.macieira@intel.com>
Signed-off-by: Michal Marek <mmarek@suse.com>
|
|
Signed-off-by: Boris Barbulovski <bbarbulovski@gmail.com>
Signed-off-by: Thiago Macieira <thiago.macieira@intel.com>
Signed-off-by: Michal Marek <mmarek@suse.com>
|
|
Signed-off-by: Boris Barbulovski <bbarbulovski@gmail.com>
Signed-off-by: Thiago Macieira <thiago.macieira@intel.com>
Signed-off-by: Michal Marek <mmarek@suse.com>
|
|
Signed-off-by: Boris Barbulovski <bbarbulovski@gmail.com>
Signed-off-by: Thiago Macieira <thiago.macieira@intel.com>
Signed-off-by: Michal Marek <mmarek@suse.com>
|
|
Signed-off-by: Boris Barbulovski <bbarbulovski@gmail.com>
Signed-off-by: Thiago Macieira <thiago.macieira@intel.com>
Signed-off-by: Michal Marek <mmarek@suse.com>
|
|
Signed-off-by: Boris Barbulovski <bbarbulovski@gmail.com>
Signed-off-by: Thiago Macieira <thiago.macieira@intel.com>
Signed-off-by: Michal Marek <mmarek@suse.com>
|
|
Signed-off-by: Boris Barbulovski <bbarbulovski@gmail.com>
Signed-off-by: Thiago Macieira <thiago.macieira@intel.com>
Signed-off-by: Michal Marek <mmarek@suse.com>
|
|
Signed-off-by: Boris Barbulovski <bbarbulovski@gmail.com>
Signed-off-by: Thiago Macieira <thiago.macieira@intel.com>
Signed-off-by: Michal Marek <mmarek@suse.com>
|
|
Signed-off-by: Boris Barbulovski <bbarbulovski@gmail.com>
Signed-off-by: Thiago Macieira <thiago.macieira@intel.com>
Signed-off-by: Michal Marek <mmarek@suse.com>
|
|
Signed-off-by: Boris Barbulovski <bbarbulovski@gmail.com>
Signed-off-by: Thiago Macieira <thiago.macieira@intel.com>
Signed-off-by: Michal Marek <mmarek@suse.com>
|
|
Signed-off-by: Boris Barbulovski <bbarbulovski@gmail.com>
Signed-off-by: Thiago Macieira <thiago.macieira@intel.com>
Signed-off-by: Michal Marek <mmarek@suse.com>
|
|
Signed-off-by: Boris Barbulovski <bbarbulovski@gmail.com>
Signed-off-by: Thiago Macieira <thiago.macieira@intel.com>
Signed-off-by: Michal Marek <mmarek@suse.com>
|
|
Signed-off-by: Boris Barbulovski <bbarbulovski@gmail.com>
Signed-off-by: Thiago Macieira <thiago.macieira@intel.com>
Signed-off-by: Michal Marek <mmarek@suse.com>
|
|
Signed-off-by: Boris Barbulovski <bbarbulovski@gmail.com>
Signed-off-by: Thiago Macieira <thiago.macieira@intel.com>
Signed-off-by: Michal Marek <mmarek@suse.com>
|
|
Signed-off-by: Boris Barbulovski <bbarbulovski@gmail.com>
Signed-off-by: Thiago Macieira <thiago.macieira@intel.com>
Signed-off-by: Michal Marek <mmarek@suse.com>
|
|
Signed-off-by: Boris Barbulovski <bbarbulovski@gmail.com>
Signed-off-by: Thiago Macieira <thiago.macieira@intel.com>
Signed-off-by: Michal Marek <mmarek@suse.com>
|
|
Signed-off-by: Boris Barbulovski <bbarbulovski@gmail.com>
Signed-off-by: Thiago Macieira <thiago.macieira@intel.com>
Signed-off-by: Michal Marek <mmarek@suse.com>
|
|
Signed-off-by: Boris Barbulovski <bbarbulovski@gmail.com>
Signed-off-by: Thiago Macieira <thiago.macieira@intel.com>
Signed-off-by: Michal Marek <mmarek@suse.com>
|
|
Signed-off-by: Boris Barbulovski <bbarbulovski@gmail.com>
Signed-off-by: Thiago Macieira <thiago.macieira@intel.com>
Signed-off-by: Michal Marek <mmarek@suse.com>
|
|
Signed-off-by: Boris Barbulovski <bbarbulovski@gmail.com>
Signed-off-by: Thiago Macieira <thiago.macieira@intel.com>
Signed-off-by: Michal Marek <mmarek@suse.com>
|
|
Signed-off-by: Boris Barbulovski <bbarbulovski@gmail.com>
Signed-off-by: Thiago Macieira <thiago.macieira@intel.com>
Signed-off-by: Michal Marek <mmarek@suse.com>
|
|
Signed-off-by: Boris Barbulovski <bbarbulovski@gmail.com>
Signed-off-by: Thiago Macieira <thiago.macieira@intel.com>
Signed-off-by: Michal Marek <mmarek@suse.com>
|
|
Signed-off-by: Boris Barbulovski <bbarbulovski@gmail.com>
Signed-off-by: Thiago Macieira <thiago.macieira@intel.com>
Signed-off-by: Michal Marek <mmarek@suse.com>
|
|
Recursive dependency issues with kconfig are unavoidable due to
some limitations with kconfig, since these issues are recurring
provide a hint to the user how they can resolve these dependency
issues and also document why such limitation exists.
While at it also document a bit of future prospects of ways to
enhance Kconfig, including providing formal semantics and evaluation
of use of a SAT solver. If you're interested in this work or prospects
of it check out the kconfig-sat project wiki [0] and mailing list [1].
[0] http://kernelnewbies.org/KernelProjects/kconfig-sat
[1] https://groups.google.com/d/forum/kconfig-sat
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: James Bottomley <jbottomley@odin.com>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Paul Bolle <pebolle@tiscali.nl>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Takashi Iwai <tiwai@suse.de>
Cc: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Mate Soos <soos.mate@gmail.com>
Signed-off-by: Luis R. Rodriguez <mcgrof@suse.com>
Signed-off-by: Michal Marek <mmarek@suse.com>
|
|
Arch Makefiles can set KBUILD_DEFCONFIG to tell kbuild the name of the
defconfig that should be built by default.
However currently there is an assumption that KBUILD_DEFCONFIG points to
a file at arch/$(SRCARCH)/configs/$(KBUILD_DEFCONFIG).
We would like to use a target, using merge_config, as our defconfig, so
adapt the logic in scripts/kconfig/Makefile to allow that.
To minimise the chance of breaking anything, we first check if
KBUILD_DEFCONFIG is a file, and if so we do the old logic. If it's not a
file, then we call the top-level Makefile with KBUILD_DEFCONFIG as the
target.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Acked-by: Michal Marek <mmarek@suse.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild
Pull kconfig updates from Michal Marek:
- kconfig warns about junk characters in Kconfig files
- merge_config.sh error handling
- small cleanup
* 'kconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
merge_config.sh: exit on missing input files
kconfig: Regenerate shipped zconf.{hash,lex}.c files
kconfig: warn of unhandled characters in Kconfig commands
kconfig: Delete unnecessary checks before the function call "sym_calc_value"
|
|
Add a check for the existence of input files and exit (with failure)
if they are missing.
Without this additional check, missing files produce error messages
but still result in an output file being generated and a successful
exit code.
Signed-off-by: Sam Bobroff <sam.bobroff@au1.ibm.com>
Signed-off-by: Michal Marek <mmarek@suse.com>
|
|
Update the shipped files generated by flex and gperf to support the
explicit use of "---help---" and to emit warnings for unsupported
characters on COMMAND tokens.
As I could not find out which flex/gperf version was used to generate
the previous version, I used flex 2.5.35 and gperf 3.0.4 from
Ubuntu 14.04 - this also leads to the big number of changed lines
in this patch.
Signed-off-by: Andreas Ruprecht <andreas.ruprecht@fau.de>
Reviewed-by: Ulf Magnusson <ulfalizer@gmail.com>
Tested-by: Ulf Magnusson <ulfalizer@gmail.com>
Signed-off-by: Michal Marek <mmarek@suse.com>
|
|
In Kconfig, definitions of options take the following form:
"<COMMAND> <PARAM> <PARAM> ...". COMMANDs and PARAMs are treated
slightly different by the underlying parser.
While commit 2e0d737fc76f ("kconfig: don't silently ignore unhandled
characters") introduced a warning for unsupported characters around
PARAMs, it does not cover situations where a COMMAND has additional
characters before it.
This change makes Kconfig emit a warning if superfluous characters
are found before COMMANDs. As the 'help' statement sometimes is
written as '---help---', the '-' character would now also be regarded
as unhandled and generate a warning. To avoid that, '-' is added to
the list of allowed characters, and the token '---help---' is included
in the zconf.gperf file.
Reported-by: Valentin Rothberg <valentinrothberg@gmail.com>
Signed-off-by: Andreas Ruprecht <andreas.ruprecht@fau.de>
Reviewed-by: Ulf Magnusson <ulfalizer@gmail.com>
Tested-by: Ulf Magnusson <ulfalizer@gmail.com>
Signed-off-by: Michal Marek <mmarek@suse.com>
|
|
The sym_calc_value() function tests whether its argument is NULL and then
returns immediately. Thus the test around the call is not needed.
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Michal Marek <mmarek@suse.com>
|
|
In kbuild it is allowed to define objects in files named "Makefile"
and "Kbuild".
Currently localmodconfig reads objects only from "Makefile"s and misses
modules like nouveau.
Link: http://lkml.kernel.org/r/1437948415-16290-1-git-send-email-richard@nod.at
Cc: stable@vger.kernel.org
Reported-and-tested-by: Leonidas Spyropoulos <artafinde@gmail.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild
Pull kconfig updates from Michal Marek:
- kconfig conditions can use usual less/greater than comparisons
- kconfig warns about stray characters in Kconfig files
- bogus expression simplification removed
- some minor fixes
* 'kconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
kconfig: re-generate *.c_shipped files after previous change
kconfig: allow use of relations other than (in)equality
kconfig: don't silently ignore unhandled characters
kconfig: Wrap long "make help" text lines
scripts/kconfig/Makefile: Cosmetic fixes
scripts/kconfig/Makefile: Fix spelling of Qt
Kconfig: Remove bad inference rules expr_eliminate_dups2()
|
|
This lets you build a kernel which can support xen dom0
or xen guests on i386, x86-64 and arm64 by just using:
make xenconfig
You can start from an allnoconfig and then switch to xenconfig.
This also splits out the options which are available currently
to be built with x86 and 'make ARCH=arm64' under a shared config.
Technically xen supports a dom0 kernel and also a guest
kernel configuration but upon review with the xen team
since we don't have many dom0 options its best to just
combine these two into one.
A few generic notes: we enable both of these:
CONFIG_INET=y
CONFIG_BINFMT_ELF=y
although technically not required given you likely will
end up with a pretty useless system otherwise.
A few architectural differences worth noting:
$ make allnoconfig; make xenconfig > /dev/null ; \
grep XEN .config > 64-bit-config
$ make ARCH=i386 allnoconfig; make ARCH=i386 xenconfig > /dev/null; \
grep XEN .config > 32-bit-config
$ make ARCH=arm64 allnoconfig; make ARCH=arm64 xenconfig > /dev/null; \
grep XEN .config > arm64-config
Since the options are already split up with a generic config and
architecture specific configs you anything on the x86 configs
are known to only work right now on x86. For instance arm64 doesn't
support MEMORY_HOTPLUG yet as such although we try to enabe it
generically arm64 doesn't have it yet, so we leave the xen
specific kconfig option XEN_BALLOON_MEMORY_HOTPLUG on x86's config
file to set expecations correctly.
Then on x86 we have differences between i386 and x86-64. The difference
between 64-bit-config and 32-bit-config is you don't get XEN_MCE_LOG as
this is only supported on 64-bit. You also do not get on i386
XEN_BALLOON_MEMORY_HOTPLUG, there does not seem to be any technical
reasons to not allow this but I gave up after a few attempts.
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Borislav Petkov <bp@suse.de>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Michal Marek <mmarek@suse.cz>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: penberg@kernel.org
Cc: levinsasha928@gmail.com
Cc: mtosatti@redhat.com
Cc: fengguang.wu@intel.com
Cc: David Vrabel <david.vrabel@citrix.com>
Cc: Ian Campbell <Ian.Campbell@citrix.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: xen-devel@lists.xenproject.org
Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Acked-by: Julien Grall <julien.grall@linaro.org>
Acked-by: Michal Marek <mmarek@suse.cz>
Acked-by: David Rientjes <rientjes@google.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Luis R. Rodriguez <mcgrof@suse.com>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
|
|
We'll be adding options for xen as well.
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Borislav Petkov <bp@suse.de>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Michal Marek <mmarek@suse.cz>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: penberg@kernel.org
Cc: levinsasha928@gmail.com
Cc: mtosatti@redhat.com
Cc: fengguang.wu@intel.com
Cc: David Vrabel <david.vrabel@citrix.com>
Cc: Ian Campbell <Ian.Campbell@citrix.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: xen-devel@lists.xenproject.org
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Acked-by: David Rientjes <rientjes@google.com>
Acked-by: Borislav Petkov <bp@suse.de>
Acked-by: Michal Marek <mmarek@suse.cz>
Signed-off-by: Luis R. Rodriguez <mcgrof@suse.com>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
|
|
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
|
|
Over the years I found it desirable to be able to use all sorts of
relations, not just (in)equality. And apparently I'm not the only one,
as there's at least one example in the tree where the programmer
assumed this would work (see DEBUG_UART_8250_WORD in
arch/arm/Kconfig.debug). Another possible use would e.g. be to fold the
two SMP/NR_CPUS prompts into one: SMP could be promptless, simply
depending on NR_CPUS > 1.
A (desirable) side effect of this change - resulting from numeric
values now necessarily being compared as numbers rather than as
strings - is that comparing hex values now works as expected: Other
than int ones (which aren't allowed to have leading zeroes), zeroes
following the 0x prefix made them compare unequal even if their values
were equal.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
|
|
At the very least we should tell people that what they wrote is not
what the utility understands.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Michal Marek <mmarek@suse.cz>
|
|
Some "make help" text lines extend beyond 80 characters. Wrap them at 79
characters.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Michal Marek <mmarek@suse.cz>
|
|
Signed-off-by: Diego Viola <diego.viola@gmail.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
|
|
Signed-off-by: Diego Viola <diego.viola@gmail.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
|
|
expr_eliminate_dups2() in scripts/kconfig/expr.c applies two invalid
inference rules:
(FOO || BAR) && (!FOO && !BAR) -> n
(FOO && BAR) || (!FOO || !BAR) -> y
They would be correct in propositional logic, but this is a three-valued
logic, and here it is wrong in that it changes semantics. It becomes
immediately visible when assigning the value 1 to both, FOO and BAR:
(FOO || BAR) && (!FOO && !BAR)
-> min(max(1, 1), min(2-1, 2-1)) = min(1, 1) = 1
while n evaluates to 0 and
(FOO && BAR) || (!FOO || !BAR)
-> max(min(1, 1), max(2-1, 2-1)) = max(1, 1) = 1
with y evaluating to 2.
Fix it by removing expr_eliminate_dups2() and the functions that have no
use anywhere else: expr_extract_eq_and(), expr_extract_eq_or(),
and expr_extract_eq() from scripts/kconfig/expr.c
Currently the bug is not triggered in mainline, so this patch does not
modify the configuration space there. To observe the bug consider this
example:
config MODULES
def_bool y
option modules
config FOO
def_tristate m
config BAR
def_tristate m
config TEST1
def_tristate y
depends on (FOO || BAR) && (!FOO && !BAR)
if TEST1 = n
comment "TEST1 broken"
endif
config TEST2
def_tristate y
depends on (FOO && BAR) || (!FOO || !BAR)
if TEST2 = y
comment "TEST2 broken"
endif
config TEST3
def_tristate y
depends on m && !m
if TEST3 = n
comment "TEST3 broken"
endif
TEST1, TEST2 and TEST3 should all evaluate to m, but without the patch,
none of them does. It is probably not obvious that TEST3 is the same bug,
but it becomes clear when considering what happens internally to the
expression
m && !m":
First it expands to
(m && MODULES) && !(m && MODULES),
then it is transformed into
(m && MODULES) && (!m || !MODULES),
and finally due to the bug it is replaced with n.
As a side effect, this patch reduces code size in expr.c by roughly 10%
and slightly improves startup time for all configuration frontends.
Signed-off-by: Martin Walch <walch.martin@web.de>
Signed-off-by: Michal Marek <mmarek@suse.cz>
|
|
Add an -s option to the various frontends and pass it when make -s is
used. Also, use $(kecho) instead of @echo in the Makefile.
Signed-off-by: Michal Marek <mmarek@suse.cz>
|
|
Use a single rule for targets handled directly by the conf program.
Signed-off-by: Michal Marek <mmarek@suse.cz>
|
|
"scripts/kconfig/merge_config.sh && make oldconfig" works well
enough for merging local config fragments, but Kbuild currently has
the entry points only for "kvmconfig" and "tinyconfig".
This commit provides the generic target for mergeconfig, so we can
manage our own config fragments easily:
put "foo.config" in arch/$(SRCARCH)/configs/ or kernel/configs/,
and then run "make foo.config".
Now "make kvmconfig" is just a shorthand of "make kvm_guest.config".
Likewise, "make tinyconfig" is equivalent to
"make allnoconfig tiny.config".
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Reviewed-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
|
|
The variable "MAKE" is used to store the command name that has
invoked the Makefile. (Actually, it is already set to "make"
if you run this script from a Makefile.)
In this script, however, it is used to determine if Make should be
run or not. It is not what we usually expect.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Reviewed-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
|
|
It is true that we do not want to move the code too far to the
right, but something like below is not preferred:
if [ "x$PREV_VAL" != "x$NEW_VAL" ] ; then
echo Value of $CFG is redefined by fragment $MERGE_FILE:
echo Previous value: $PREV_VAL
echo New value: $NEW_VAL
echo
elif [ "$WARNREDUN" = "true" ]; then
echo Value of $CFG is redundant by fragment $MERGE_FILE:
fi
To fix this, call "continue" if the "grep" command fails to find the
given CONFIG.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Reviewed-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
|
|
Kbuild always runs in $(objtree). Actually, $(objtree) is always
set to "." by the top-level Makefile.
We can omit "-O $(objtree)" and "$(objtree)/".
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Reviewed-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
|
|
Currently, "make tinyconfig" does not work with "-j" option.
$ make mrproper
$ make -j8 tinyconfig
HOSTCC scripts/basic/fixdep
HOSTCC scripts/kconfig/conf.o
SHIPPED scripts/kconfig/zconf.tab.c
SHIPPED scripts/kconfig/zconf.lex.c
SHIPPED scripts/kconfig/zconf.hash.c
HOSTCC scripts/kconfig/zconf.tab.o
HOSTLD scripts/kconfig/conf
scripts/kconfig/conf --allnoconfig Kconfig
#
# configuration written to .config
#
scripts/kconfig/Makefile:122: *** You need an existing .config
for this target. Stop.
make: *** [tinyconfig] Error 2
As shown above, "allnoconfig" has created the .config file before
mergeconfig is called, but Make still raises a false alarm because
of some sort of race condition.
We can fix this issue by moving the error check to the shell script.
Anyway, scripts/kconfig/merge_config.sh always requires an existing
.config as a base file. It is reasonable to check its existence in
the shell script.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Reviewed-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
|
