| Age | Commit message (Collapse) | Author |
|---|
|
Because of choice-in-a-choice constructs, it can happen that not all
symbols are assigned a value during randconfig, leading in rare cases
to this situation:
---8<--- choice-in-choice.in
choice
bool "A/B/C"
config A
bool "A"
config B
bool "B"
if B
choice
bool "E/F"
config E
bool "E"
config F
bool "F"
endchoice
endif # B
config C
bool "C"
endchoice
---8<---
$ ./scripts/kconfig/conf --randconfig choice-in-choice.in
[--SNIP--]
$ ./scripts/kconfig/conf --silentoldconfig choice-in-choice.in </dev/null
[--SNIP--]
A/B/C
1. A (A)
> 2. B (B)
3. C (C)
choice[1-3]: 2
E/F
> 1. E (E) (NEW)
2. F (F) (NEW)
choice[1-2]: aborted!
Console input/output is redirected. Run 'make oldconfig' to update
configuration.
Fix this by looping in randconfig for as long as some symbol gets assigned
a value.
Note: this was spotted with the USB EHCI Debug Device Gadget (USB_G_DBGP),
which uses this choice-in-a-choice construct, and exhibits this problem.
The example above is just a stripped-down minimalist test-case.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
|
|
choice menu depends on
The defconfig and Kconfig combination below, which is based on 3.10-rc4
Kconfigs, resulted in several options getting set to "m" instead of "y".
defconfig.choice:
---8<---
CONFIG_MODULES=y
CONFIG_USB_ZERO=y
---8<---
Kconfig.choice:
---8<---
menuconfig MODULES
bool "Enable loadable module support"
config CONFIGFS_FS
tristate "Userspace-driven configuration filesystem"
config OCFS2_FS
tristate "OCFS2 file system support"
depends on CONFIGFS_FS
select CRC32
config USB_LIBCOMPOSITE
tristate
select CONFIGFS_FS
choice
tristate "USB Gadget Drivers"
default USB_ETH
config USB_ZERO
tristate "Gadget Zero (DEVELOPMENT)"
select USB_LIBCOMPOSITE
config USB_ETH
tristate "Ethernet Gadget (with CDC Ethernet support)"
select USB_LIBCOMPOSITE
endchoice
config CRC32
tristate "CRC32/CRC32c functions"
default y
choice
prompt "CRC32 implementation"
depends on CRC32
default CRC32_SLICEBY8
config CRC32_SLICEBY8
bool "Slice by 8 bytes"
endchoice
---8<---
$ scripts/kconfig/conf --defconfig=defconfig.choice Kconfig.choice
would result in:
.config:
---8<---
CONFIG_MODULES=y
CONFIG_CONFIGFS_FS=m
CONFIG_USB_LIBCOMPOSITE=m
CONFIG_USB_ZERO=m
CONFIG_CRC32=y
CONFIG_CRC32_SLICEBY8=y
---8<---
when the expected result would be:
.config:
---8<---
CONFIG_MODULES=y
CONFIG_CONFIGFS_FS=y
CONFIG_USB_LIBCOMPOSITE=y
CONFIG_USB_ZERO=y
CONFIG_CRC32=y
CONFIG_CRC32_SLICEBY8=y
---8<---
Signed-off-by: Arve Hjønnevåg <arve@android.com>
[yann.morin.1998@free.fr: add the resulting .config to commit log,
remove unneeded USB_GADGET from the defconfig]
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
|
|
(and get them out of the noise in the audit work)
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
|
|
Currently, the CONFIG_ prefix is hard-coded in the kconfig frontends
executables. This means that two projects that use kconfig with
different prefixes can not share the same kconfig frontends.
Instead of hard-coding the prefix in the frontends, get it from the
environment, and revert back to hard-coded value if not found.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Michal Marek <mmarek@suse.cz>
|
|
Currently, we get the CONFIG_ prefix via the CONFIG_ macro, which means
the CONFIG_ prefix is hard-coded at compile time. This goes against
having a run-time defined CONFIG_ prefix.
Add a function that returns the CONFIG_ prefix to use (but keep the
current hard-coded behavior, to be changed in a later patch).
To avoid touching all the code that uses the CONFIG_ macro, we just
undef it, and define it to be a call to the function.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Michal Marek <mmarek@suse.cz>
|
|
Reinhard Tartler discovered a corner case of calling xfwrite() where the
length of the string is zero.
Arnaud Lacombe suggested to use assertion for the corner case, as
fwrite(3) is currently used:
1) in comment printers. Empty comment are not allowed.
2) in a callback passed to expr_print(), where the string printed is
either NULL OR non-empty.
3) in the lexer, auto-generated, and unused.
I feel using assertion is a good solution:
1) It cleanly takes care of the above-mentioned corner case.
2) It can be easily disabled by defining NDEBUG.
3) It asserts xfwrite() is simply a wrapper for fwrite().
Reported-by: Reinhard Tartler <Reinhard.Tartler@informatik.uni-erlangen.de>
Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>
Signed-off-by: Jean Sacren <sakiwit@gmail.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6
* 'kconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6: (25 commits)
kconfig: Introduce IS_ENABLED(), IS_BUILTIN() and IS_MODULE()
xconfig: Abort close if configuration cannot be saved
kconfig: fix missing "0x" prefix from S_HEX symbol in autoconf.h
kconfig/nconf: remove useless conditionnal
kconfig/nconf: prevent segfault on empty menu
kconfig/nconf: use the generic menu_get_ext_help()
nconfig: Avoid Wunused-but-set warning
kconfig/conf: mark xfgets() private
kconfig: remove pending prototypes for kconfig_load()
kconfig/conf: add command line options' description
kconfig/conf: reduce the scope of `defconfig_file'
kconfig: use calloc() for expr allocation
kconfig: introduce specialized printer
kconfig: do not overwrite symbol direct dependency in assignment
kconfig/gconf: silent missing prototype warnings
kconfig/gconf: kill deadcode
kconfig: nuke LKC_DIRECT_LINK cruft
kconfig: nuke reference to SWIG
kconfig: add missing <stdlib.h> inclusion
kconfig: add missing <ctype.h> inclusion
...
Fix up conflicts in scripts/kconfig/Makefile
|
|
kbuild/kconfig
|
|
This function has not much reason to be public. In the mean time, convert
declaration from K&R C to ISO C.
Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>
|
|
Commit 5a6f8d2bd9e3392569ed6f29ea4d7210652f929b removed `kconfig_load()',
however, it missed an hidden prototypes in `lkc.h'. Fix this.
Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>
|
|
Make conf_write_symbol() grammar agnostic to be able to use it from different
code path. These path pass a printer callback which will print a symbol's name
and its value in different format.
conf_write_symbol()'s job become mostly only to prepare a string for the
printer. This avoid to have to pass specialized flag to generic
functions
Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>
[mmarek: rebased on top of de12518 (kconfig: autogenerated config_is_xxx
macro)]
Signed-off-by: Michal Marek <mmarek@suse.cz>
|
|
Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>
|
|
This interface is not (and has never been ?) used by any frontend, just get rid
of it.
Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6
* 'kconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6:
nconf: handle comment entries within choice/endchoice
kconfig: fix warning
kconfig: Make expr_copy() take a const argument
kconfig: simplify select-with-unmet-direct-dependency warning
kconfig: add more S_INT and S_HEX consistency checks
kconfig: fix `zconfdebug' extern declaration
kconfig/conf: merge duplicate switch's case
kconfig: fix typos
kbuild/gconf: add dummy inline for bind_textdomain_codeset()
kbuild/nconf: fix spaces damage
kconfig: nuke second argument of conf_write_symbol()
kconfig: do not define AUTOCONF_INCLUDED
kconfig: the day kconfig warns about "select"-abuse has come
|
|
This symbol is only exist if YYDEBUG is defined.
Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
|
|
This symbols is used by gconf.
Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
|
|
This option is aimed to add the possibility to control a menu's visibility
without adding dependency to the expression to all the submenu.
Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>
Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Tested-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Michal Marek <mmarek@suse.cz>
|
|
Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Michal Marek <mmarek@suse.cz>
|
|
Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Michal Marek <mmarek@suse.cz>
|
|
This fix facilitates fgets() either it returns on success or on error or
when end of file occurs.
Signed-off-by: Jean Sacren <sakiwit@gmail.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
|
|
This fix facilitates fwrite() in both confdata.c and expr.c, either it
succeeds in writing, or an error occurs, or the end of file is reached.
Signed-off-by: Jean Sacren <sakiwit@gmail.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
|
|
savedefconfig will save a minimal config to a file
named "defconfig".
The config symbols are saved in the same order as
they appear in the menu structure so it should
be possible to map them to the relevant menus
if desired.
The implementation was tested against several minimal
configs for arm which was created using brute-force.
There was one regression related to default numbers
which had their valid range further limited by another symbol.
Sample:
config FOO
int "foo"
default 4
config BAR
int "bar"
range 0 FOO
If FOO is set to 3 then BAR cannot take a value higher than 3.
But the current implementation will set BAR equal to 4.
This is seldomly used and the final configuration is OK,
and the fix was non-trivial.
So it was documented in the code and left as is.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Michal Marek <mmarek@suse.cz>
|
|
Move logic to determine default for a choice to
a separate function.
No functional changes.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Michal Marek <mmarek@suse.cz>
|
|
This patch was inspired by the kernel projects page, where an ncurses
replacement for menuconfig was mentioned (by Sam Ravnborg).
Building on menuconfig, this patch implements a more modern look
interface using ncurses and ncurses' satellite libraries (menu, panel,
form). The implementation does not depend on lxdialog, which is
currently distributed with the kernel.
Signed-off-by: Nir Tzachar <nir.tzachar@gmail.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
|
|
Help text for certain config options is very extensive (the text
includes the names of all other options the option in question depends
on). Long lines are not wrapped, making it impossible to see the list
without scrolling horizontally.
This patch adds some logic which wraps help screen lines at word
boundaries to prevent truncating.
Tested by running
ARCH=powerpc make menuconfig O=/tmp/build
which shows that the long lines are now wrapped, and
ARCH=powerpc make xconfig O=/tmp/build
to demonstrate that it still compiles and operates as expected.
Signed-off-by: Vadim Bendebury <vbendeb@google.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
|
|
Regardless of KCONFIG_AUTOCONFIG, the filename written as a Make target
into "include/config/auto.conf.cmd" was always the default one.
Of course this doesn't make it work for the Kernel kbuild system, since
there the filename is hardcoded at several places in the Makefiles.
Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
|
|
Add conf_set_all_new_symbols() which set all symbols (which don't have a
value yet) to a specifed value.
Signed-off-by: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
|
|
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Timur Tabi <timur@freescale.com>
|
|
Add the possibility to import a value from the environment into kconfig
via the option syntax. Beside flexibility this has the advantage
providing proper dependencies.
Documented the options syntax.
Signed-off-by: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
|
|
Export and use the function conf_get_configname()
to retreive the default configuration filename.
Suggested by: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
|
|
functions only
Those two functions are
void sym_set_change_count(int count)
and
void sym_add_change_count(int count)
All write accesses to sym_change_count are replaced by calls to above
functions.
Variable and changer-functions are moved to confdata.c. IMO thats ok, as
sym_change_count is an attribute of the .config's change state.
Signed-off-by: Karsten Wiese <fzu@wemgehoertderstaat.de>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
Acked-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
If you set KCONFIG_OVERWRITECONFIG in environment, Kconfig will not break
symlinks when .config is a symlink to somewhere else.
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
|
|
This makes it possible to change two options which were hardcoded sofar.
1. Any symbol can now take the role of CONFIG_MODULES
2. The more useful option is to change the list of default file names,
which kconfig uses to load the base configuration if .config isn't
available.
Signed-off-by: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
|
|
This adds the general framework to the parser to define options for config
symbols with a syntax like:
config FOO
option bar[="arg"]
Signed-off-by: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
|
|
Extend conf_read_simple() so it can load multiple configurations.
Signed-off-by: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
|
|
Add some more checks during the parsing of .config, so that after parsing
sym_change_count reflects the correct state whether the .config is correct and
in sync with the Kconfig or if it needs saving.
Signed-off-by: Roman Zippel <zippel@linux-m68k.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
Add a few error tokens to the parser to catch common errors and print more
descriptive error messages.
Signed-off-by: Roman Zippel <zippel@linux-m68k.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
This simplifies the parser a bit by merging the various symbol types into a
single token and adds the type to the keyword hash.
Signed-off-by: Roman Zippel <zippel@linux-m68k.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
Use gperf to generate a hash for the kconfig keywords. This greatly reduces
the size of the generated scanner and makes it easier to extend kconfig.
Signed-off-by: Roman Zippel <zippel@linux-m68k.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
I made a patch that detects if libintl.h (needed for nls) is present on the
host system and if it's not, it nls support is disabled by providing
dummies for the used nls functions.
This way if there is nls support on the host system the *config targets
will build according to Arnaldo Carvalho de Melo's i18n modifications, else
it just uses the original English messages.
I have also made a bug report at kernel's bugzilla:
http://bugzilla.kernel.org/show_bug.cgi?id=5501
And there is a discussion about this problem in Gentoo's bugzilla:
http://bugs.gentoo.org/show_bug.cgi?id=99810
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
Replace all menu_add_prop mimicking menu_add_prompt with the latter func. I've
had to add a return value to menu_add_prompt for one usage.
I've rebuilt scripts/kconfig/zconf.tab.c_shipped by hand to reflect changes
in the source (I've not the same Bison version so regenerating it wouldn't
have been not a good idea), and compared it with what Roman itself did some
time ago, and it's the same.
So I guess this can be finally merged.
Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
|
|
This patch adds i18n support for make *config, allowing users to have the
config process in their own language.
No printk was harmed in the process, don't worry, so all the bug reports,
kernel messages, etc, remain in english, just the user tools to configure
the kernel are internationalized.
Users not interested in translations can just unset the related LANG,
LC_ALL, etc env variables and have the config process in plain english,
something like:
LANG= make menuconfig
is enough for having the whole config process in english. Or just don't
install any translation file.
Translations for brazilian portuguese are being done by a team of
volunteers at:
http://www.visionflex.inf.br/kernel_ptbr/pmwiki.php/Principal/Traducoes
To start the translation process:
make update-po-config
This will generate the pot template named scripts/kconfig/linux.pot,
copy it to, say, ~/es.po, to start the translation for spanish.
To test your translation, as root issue this command:
msgfmt -o /usr/share/locale/es/LC_MESSAGES/linux.mo ~/es.po
Replace "es" with your language code.
Then execute, for instance:
make menuconfig
The current patch doesn't use any optimization to reduce the size of the
generated .mo file, it is possible to use the config option as a key, but
this doesn't prevent the current patch from being used or the translations
done under the current scheme to be in any way lost if we chose to do any
kind of keying.
Thanks to Fabricio Vaccari for starting the pt_BR (brazilian portuguese)
translation effort, Thiago Maciera for helping me with the gconf.cc (QT
frontent) i18n coding and to all the volunteers that are already working on
the first translation, to pt_BR.
I left the question on whether to ship the translations with the stock kernel
sources to be discussed here, please share your suggestions.
Signed-off-by: Arnaldo Carvalho de Melo <acme@conectiva.com.br>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org
Signed-off-by: Andrew Morton <akpm@osdl.org>
|
|
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
|
