summaryrefslogtreecommitdiff
path: root/scripts/kallsyms.c
AgeCommit message (Collapse)Author
2019-11-25scripts/kallsyms: remove redundant initializersMasahiro Yamada
These are set to zero without the explicit initializers. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-11-25scripts/kallsyms: put check_symbol_range() calls close togetherMasahiro Yamada
Put the relevant code close together. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-11-25scripts/kallsyms: make check_symbol_range() void functionMasahiro Yamada
There is no more reason to check the return value of check_symbol_range(). Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-11-25scripts/kallsyms: move ignored symbol types to is_ignored_symbol()Masahiro Yamada
Collect the ignored patterns to is_ignored_symbol(). Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-11-25scripts/kallsyms: move more patterns to the ignored_prefixes arrayMasahiro Yamada
Refactoring for shortening the code. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-11-25scripts/kallsyms: skip ignored symbols very earlyMasahiro Yamada
Unless the address range matters, symbols can be ignored earlier, which avoids unneeded memory allocation. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-11-25scripts/kallsyms: add const qualifiers where possibleMasahiro Yamada
Add 'const' where a function does not write to the pointer dereferenes. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-11-25scripts/kallsyms: make find_token() return (unsigned char *)Masahiro Yamada
The callers of this function expect (unsigned char *). I do not see a good reason to make this function return (void *). Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-11-25scripts/kallsyms: replace prefix_underscores_count() with strspn()Masahiro Yamada
You can do equivalent things with strspn(). I do not see noticeable performance difference. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-11-25scripts/kallsyms: add sym_name() to mitigate cast uglinessMasahiro Yamada
sym_entry::sym is (unsigned char *) instead of (char *) because kallsyms exploits the MSB for compression, and the characters are used as the index of token_profit array. However, it requires casting (unsigned char *) to (char *) in some places since standard library functions such as strcmp(), strlen() expect (char *). Introduce a new helper, sym_name(), which advances the given pointer by 1 and casts it to (char *). Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-11-25scripts/kallsyms: remove unneeded length check for prefix matchingMasahiro Yamada
l <= strlen(sym_name) is unnecessary for prefix matching. strncmp() will do. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-11-25scripts/kallsyms: remove redundant is_arm_mapping_symbol()Masahiro Yamada
Since commit 6f00df24ee39 ("[PATCH] Strip local symbols from kallsyms"), all symbols starting '$' are ignored. is_arm_mapping_symbol() particularly ignores $a, $t, etc. but it is redundant. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-11-25scripts/kallsyms: set relative_base more effectivelyMasahiro Yamada
Currently, record_relative_base() iterates over the entire table to find the minimum address, but it is not efficient because we sort the table anyway. After sort_symbol(), the table is sorted by address. (kallsyms parses the 'nm -n' output, so the data is already sorted by address, but this commit does not rely on it.) Move record_relative_base() after sort_symbols(), and take the first non-absolute symbol value. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-11-25scripts/kallsyms: shrink table before sorting itMasahiro Yamada
Currently, build_initial_tok_table() trims unused symbols, but it is called after sort_symbols(). It is not efficient to sort the huge table that contains unused entries. Shrink the table before sorting it. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-11-25scripts/kallsyms: fix definitely-lost memory leakMasahiro Yamada
build_initial_tok_table() overwrites unused sym_entry to shrink the table size. Before the entry is overwritten, table[i].sym must be freed since it is malloc'ed data. This fixes the 'definitely lost' report from valgrind. I ran valgrind against x86_64_defconfig of v5.4-rc8 kernel, and here is the summary: [Before the fix] LEAK SUMMARY: definitely lost: 53,184 bytes in 2,874 blocks [After the fix] LEAK SUMMARY: definitely lost: 0 bytes in 0 blocks Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-11-25scripts/kallsyms: remove unneeded #ifndef ARRAY_SIZEMasahiro Yamada
This is not defined in the standard headers. #ifndef is unneeded. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-07-08kallsyms: exclude kasan local symbols on s390Vasily Gorbik
gcc asan instrumentation emits the following sequence to store frame pc when the kernel is built with CONFIG_RELOCATABLE: debug/vsprintf.s: .section .data.rel.ro.local,"aw" .align 8 .LC3: .quad .LASANPC4826@GOTOFF .text .align 8 .type number, @function number: .LASANPC4826: and in case reloc is issued for LASANPC label it also gets into .symtab with the same address as actual function symbol: $ nm -n vmlinux | grep 0000000001397150 0000000001397150 t .LASANPC4826 0000000001397150 t number In the end kernel backtraces are almost unreadable: [ 143.748476] Call Trace: [ 143.748484] ([<000000002da3e62c>] .LASANPC2671+0x114/0x190) [ 143.748492] [<000000002eca1a58>] .LASANPC2612+0x110/0x160 [ 143.748502] [<000000002de9d830>] print_address_description+0x80/0x3b0 [ 143.748511] [<000000002de9dd64>] __kasan_report+0x15c/0x1c8 [ 143.748521] [<000000002ecb56d4>] strrchr+0x34/0x60 [ 143.748534] [<000003ff800a9a40>] kasan_strings+0xb0/0x148 [test_kasan] [ 143.748547] [<000003ff800a9bba>] kmalloc_tests_init+0xe2/0x528 [test_kasan] [ 143.748555] [<000000002da2117c>] .LASANPC4069+0x354/0x748 [ 143.748563] [<000000002dbfbb16>] do_init_module+0x136/0x3b0 [ 143.748571] [<000000002dbff3f4>] .LASANPC3191+0x2164/0x25d0 [ 143.748580] [<000000002dbffc4c>] .LASANPC3196+0x184/0x1b8 [ 143.748587] [<000000002ecdf2ec>] system_call+0xd8/0x2d8 Since LASANPC labels are not even unique and get into .symtab only due to relocs filter them out in kallsyms. Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-03-10Merge tag 'kbuild-v5.1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild updates from Masahiro Yamada: - do not generate unneeded top-level built-in.a - let git ignore O= directory entirely - optimize scripts/kallsyms slightly - exclude DWARF info from *.s regardless of config options - fix GCC toolchain search path for Clang to prepare ld.lld support - do not generate modules.order when CONFIG_MODULES is disabled - simplify single target rules and remove VPATH for external module build - allow to add optional flags to dpkg-buildpackage when building deb-pkg - move some compiler option tests from Makefile to Kconfig - various Makefile cleanups * tag 'kbuild-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (40 commits) kbuild: remove scripts/basic/% build target kbuild: use -Werror=implicit-... instead of -Werror-implicit-... kbuild: clean up scripts/gcc-version.sh kbuild: remove cc-version macro kbuild: update comment block of scripts/clang-version.sh kbuild: remove commented-out INITRD_COMPRESS kbuild: move -gsplit-dwarf, -gdwarf-4 option tests to Kconfig kbuild: [bin]deb-pkg: add DPKG_FLAGS variable kbuild: move ".config not found!" message from Kconfig to Makefile kbuild: invoke syncconfig if include/config/auto.conf.cmd is missing kbuild: simplify single target rules kbuild: remove empty rules for makefiles kbuild: make -r/-R effective in top Makefile for old Make versions kbuild: move tools_silent to a more relevant place kbuild: compute false-positive -Wmaybe-uninitialized cases in Kconfig kbuild: refactor cc-cross-prefix implementation kbuild: hardcode genksyms path and remove GENKSYMS variable scripts/gdb: refactor rules for symlink creation kbuild: create symlink to vmlinux-gdb.py in scripts_gdb target scripts/gdb: do not descend into scripts/gdb from scripts ...
2019-02-19kallsyms: include <asm/bitsperlong.h> instead of <asm/types.h>Masahiro Yamada
<asm/bitsperlong.h> is enough to include the definition of BITS_PER_LONG. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-02-19kallsyms: remove unneeded memset() callsMasahiro Yamada
Global variables in the .bss section are zeroed out before the program starts to run. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-02-19kallsyms: add static qualifiers where missingMasahiro Yamada
Fix the following sparse warnings: scripts/kallsyms.c:65:5: warning: symbol 'token_profit' was not declared. Should it be static? scripts/kallsyms.c:68:15: warning: symbol 'best_table' was not declared. Should it be static? scripts/kallsyms.c:69:15: warning: symbol 'best_table_len' was not declared. Should it be static? Also, remove 'inline' from is_arm_mapping_symbol(). The compiler will inline it anyway when it is appropriate to do so. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-01-28kallsyms: Handle too long symbols in kallsyms.cEugene Loh
When checking for symbols with excessively long names, account for null terminating character. Fixes: f3462aa952cf ("Kbuild: Handle longer symbols in kallsyms.c") Signed-off-by: Eugene Loh <eugene.loh@oracle.com> Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-01-06kallsyms: lower alignment on ARMMathias Krause
As mentioned in the info pages of gas, the '.align' pseudo op's interpretation of the alignment value is architecture specific. It might either be a byte value or taken to the power of two. On ARM it's actually the latter which leads to unnecessary large alignments of 16 bytes for 32 bit builds or 256 bytes for 64 bit builds. Fix this by switching to '.balign' instead which is consistent across all architectures. Signed-off-by: Mathias Krause <minipli@googlemail.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-09-10kallsyms: remove left-over Blackfin codeMasahiro Yamada
These symbols were added by commit 028f042613c3 ("kallsyms: support kernel symbols in Blackfin on-chip memory") for Blackfin. The Blackfin support was removed by commit 4ba66a976072 ("arch: remove blackfin port"). Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-09-10kallsyms: reduce size a little on 64-bitJan Beulich
Both kallsyms_num_syms and kallsyms_markers[] don't really need to use unsigned long as their (base) types; unsigned int fully suffices. Signed-off-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-05-29scripts: Fixed printf format mismatchnixiaoming
scripts/kallsyms.c: function write_src: "printf", the #1 format specifier "d" need arg type "int", but the according arg "table_cnt" has type "unsigned int" scripts/recordmcount.c: function do_file: "fprintf", the #1 format specifier "d" need arg type "int", but the according arg "(*w2)(ehdr->e_machine)" has type "unsigned int" scripts/recordmcount.h: function find_secsym_ndx: "fprintf", the #1 format specifier "d" need arg type "int", but the according arg "txtndx" has type "unsigned int" Signed-off-by: nixiaoming <nixiaoming@huawei.com> Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-05-17kallsyms: remove symbol prefix supportMasahiro Yamada
CONFIG_HAVE_UNDERSCORE_SYMBOL_PREFIX was selected by BLACKFIN, METAG. They were removed by commit 4ba66a976072 ("arch: remove blackfin port"), commit bb6fb6dfcc17 ("metag: Remove arch/metag/"), respectively. No more architecture enables CONFIG_HAVE_UNDERSCORE_SYMBOL_PREFIX, hence the --symbol-prefix option is unnecessary. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
2018-04-04Merge tag 'arm64-upstream' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 updates from Will Deacon: "Nothing particularly stands out here, probably because people were tied up with spectre/meltdown stuff last time around. Still, the main pieces are: - Rework of our CPU features framework so that we can whitelist CPUs that don't require kpti even in a heterogeneous system - Support for the IDC/DIC architecture extensions, which allow us to elide instruction and data cache maintenance when writing out instructions - Removal of the large memory model which resulted in suboptimal codegen by the compiler and increased the use of literal pools, which could potentially be used as ROP gadgets since they are mapped as executable - Rework of forced signal delivery so that the siginfo_t is well-formed and handling of show_unhandled_signals is consolidated and made consistent between different fault types - More siginfo cleanup based on the initial patches from Eric Biederman - Workaround for Cortex-A55 erratum #1024718 - Some small ACPI IORT updates and cleanups from Lorenzo Pieralisi - Misc cleanups and non-critical fixes" * tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (70 commits) arm64: uaccess: Fix omissions from usercopy whitelist arm64: fpsimd: Split cpu field out from struct fpsimd_state arm64: tlbflush: avoid writing RES0 bits arm64: cmpxchg: Include linux/compiler.h in asm/cmpxchg.h arm64: move percpu cmpxchg implementation from cmpxchg.h to percpu.h arm64: cmpxchg: Include build_bug.h instead of bug.h for BUILD_BUG arm64: lse: Include compiler_types.h and export.h for out-of-line LL/SC arm64: fpsimd: include <linux/init.h> in fpsimd.h drivers/perf: arm_pmu_platform: do not warn about affinity on uniprocessor perf: arm_spe: include linux/vmalloc.h for vmap() Revert "arm64: Revert L1_CACHE_SHIFT back to 6 (64-byte cache line size)" arm64: cpufeature: Avoid warnings due to unused symbols arm64: Add work around for Arm Cortex-A55 Erratum 1024718 arm64: Delay enabling hardware DBM feature arm64: Add MIDR encoding for Arm Cortex-A55 and Cortex-A35 arm64: capabilities: Handle shared entries arm64: capabilities: Add support for checks based on a list of MIDRs arm64: Add helpers for checking CPU MIDR against a range arm64: capabilities: Clean up midr range helpers arm64: capabilities: Change scope of VHE to Boot CPU feature ...
2018-03-06scripts/kallsyms: filter arm64's __efistub_ symbolsArd Biesheuvel
On arm64, the EFI stub and the kernel proper are essentially the same binary, although the EFI stub executes at a different virtual address as the kernel. For this reason, the EFI stub is restricted in the symbols it can link to, which is ensured by prefixing all EFI stub symbols with __efistub_ (and emitting __efistub_ prefixed aliases for routines that may be shared between the core kernel and the stub) These symbols are leaking into kallsyms, polluting the namespace, so let's filter them explicitly. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Will Deacon <will.deacon@arm.com>
2018-03-02kbuild/kallsyms: trivial typo fixCao jin
Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-10-13scripts/kallsyms.c: ignore symbol type 'n'Guenter Roeck
gcc on aarch64 may emit synbols of type 'n' if the kernel is built with '-frecord-gcc-switches'. In most cases, those symbols are reported with nm as 000000000000000e n $d and with objdump as 0000000000000000 l d .GCC.command.line 0000000000000000 .GCC.command.line 000000000000000e l .GCC.command.line 0000000000000000 $d Those symbols are detected in is_arm_mapping_symbol() and ignored. However, if "--prefix-symbols=<prefix>" is configured as well, the situation is different. For example, in efi/libstub, arm64 images are built with '--prefix-alloc-sections=.init --prefix-symbols=__efistub_'. In combination with '-frecord-gcc-switches', the symbols are now reported by nm as: 000000000000000e n __efistub_$d and by objdump as: 0000000000000000 l d .GCC.command.line 0000000000000000 .GCC.command.line 000000000000000e l .GCC.command.line 0000000000000000 __efistub_$d Those symbols are no longer ignored and included in the base address calculation. This results in a base address of 000000000000000e, which in turn causes kallsyms to abort with kallsyms failure: relative symbol value 0xffffff900800a000 out of range in relative mode The problem is seen in little endian arm64 builds with CONFIG_EFI enabled and with '-frecord-gcc-switches' set in KCFLAGS. Explicitly ignore symbols of type 'n' since those are clearly debug symbols. Link: http://lkml.kernel.org/r/1507136063-3139-1-git-send-email-linux@roeck-us.net Signed-off-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-03kbuild: modversions: add infrastructure for emitting relative CRCsArd Biesheuvel
This add the kbuild infrastructure that will allow architectures to emit vmlinux symbol CRCs as 32-bit offsets to another location in the kernel where the actual value is stored. This works around problems with CRCs being mistaken for relocatable symbols on kernels that self relocate at runtime (i.e., powerpc with CONFIG_RELOCATABLE=y) For the kbuild side of things, this comes down to the following: - introducing a Kconfig symbol MODULE_REL_CRCS - adding a -R switch to genksyms to instruct it to emit the CRC symbols as references into the .rodata section - making modpost distinguish such references from absolute CRC symbols by the section index (SHN_ABS) - making kallsyms disregard non-absolute symbols with a __crc_ prefix Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-12-11scripts/kallsyms: remove last remnants of --page-offset optionArd Biesheuvel
The implementation of the --page-offset kallsyms command line option has been removed, so remove it from the usage string as well. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Michal Marek <mmarek@suse.com>
2016-04-07ARM: 8553/1: kallsyms: remove --page-offset command line optionArd Biesheuvel
The --page-offset command line option was only used for ARM, to filter symbol addresses below CONFIG_PAGE_OFFSET. This is no longer needed, so remove the functionality altogether. Acked-by: Nicolas Pitre <nico@linaro.org> Acked-by: Chris Brandt <chris.brandt@renesas.com> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2016-04-07ARM: 8555/1: kallsyms: ignore ARM mode switching veneersArd Biesheuvel
On ARM, the linker may emit veneers to deal with relative branch instructions that appear too far away from their targets. Since the second kallsyms pass results in an increase of the kernel size, it may result in additional veneers to be emitted, potentially affecting the output of kallsyms itself if these symbols are visible to it, and for that reason, symbols whose names end in '_veneer' are ignored explicitly. However, when building Thumb2 kernels, such veneers are named differently if they also incur a mode switch, and since they are not filtered by kallsyms, they may cause the build to fail. So filter symbols whose names end in '_from_arm' or '_from_thumb' as well. Tested-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2016-03-15kallsyms: add support for relative offsets in kallsyms address tableArd Biesheuvel
Similar to how relative extables are implemented, it is possible to emit the kallsyms table in such a way that it contains offsets relative to some anchor point in the kernel image rather than absolute addresses. On 64-bit architectures, it cuts the size of the kallsyms address table in half, since offsets between kernel symbols can typically be expressed in 32 bits. This saves several hundreds of kilobytes of permanent .rodata on average. In addition, the kallsyms address table is no longer subject to dynamic relocation when CONFIG_RELOCATABLE is in effect, so the relocation work done after decompression now doesn't have to do relocation updates for all these values. This saves up to 24 bytes (i.e., the size of a ELF64 RELA relocation table entry) per value, which easily adds up to a couple of megabytes of uncompressed __init data on ppc64 or arm64. Even if these relocation entries typically compress well, the combined size reduction of 2.8 MB uncompressed for a ppc64_defconfig build (of which 2.4 MB is __init data) results in a ~500 KB space saving in the compressed image. Since it is useful for some architectures (like x86) to retain the ability to emit absolute values as well, this patch also adds support for capturing both absolute and relative values when KALLSYMS_ABSOLUTE_PERCPU is in effect, by emitting absolute per-cpu addresses as positive 32-bit values, and addresses relative to the lowest encountered relative symbol as negative values, which are subtracted from the runtime address of this base symbol to produce the actual address. Support for the above is enabled by default for all architectures except IA-64 and Tile-GX, whose symbols are too far apart to capture in this manner. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Tested-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Kees Cook <keescook@chromium.org> Tested-by: Kees Cook <keescook@chromium.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Ingo Molnar <mingo@kernel.org> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Michal Marek <mmarek@suse.cz> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-15kallsyms: don't overload absolute symbol type for percpu symbolsArd Biesheuvel
Commit c6bda7c988a5 ("kallsyms: fix percpu vars on x86-64 with relocation") overloaded the 'A' (absolute) symbol type to signify that a symbol is not subject to dynamic relocation. However, the original A type does not imply that at all, and depending on the version of the toolchain, many A type symbols are emitted that are in fact relative to the kernel text, i.e., if the kernel is relocated at runtime, these symbols should be updated as well. For instance, on sparc32, the following symbols are emitted as absolute (kindly provided by Guenter Roeck): f035a420 A _etext f03d9000 A _sdata f03de8c4 A jiffies f03f8860 A _edata f03fc000 A __init_begin f041bdc8 A __init_text_end f0423000 A __bss_start f0423000 A __init_end f044457d A __bss_stop f044457d A _end On x86_64, similar behavior can be observed: ffffffff81a00000 A __end_rodata_hpage_align ffffffff81b19000 A __vvar_page ffffffff81d3d000 A _end Even if only a couple of them pass the symbol range check that results in them to be taken into account for the final kallsyms symbol table, it is obvious that 'A' does not mean the symbol does not need to be updated at relocation time, and overloading its meaning to signify that is perhaps not a good idea. So instead, add a new percpu_absolute member to struct sym_entry, and when --absolute-percpu is in effect, use it to record symbols whose addresses should be emitted as final values rather than values that still require relocation at runtime. That way, we can drop the check against the 'A' type. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Tested-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Kees Cook <keescook@chromium.org> Tested-by: Kees Cook <keescook@chromium.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Ingo Molnar <mingo@kernel.org> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Michal Marek <mmarek@suse.cz> Acked-by: Rusty Russell <rusty@rustcorp.com.au> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-07Kbuild: kallsyms: drop special handling of pre-3.0 GCC symbolsArd Biesheuvel
Since we have required at least GCC v3.2 for some time now, we can drop the special handling of the 'gcc[0-9]_compiled.' label which is not emitted anymore since GCC v3.0. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Michal Marek <mmarek@suse.cz>
2015-04-07Kbuild: kallsyms: ignore veneers emitted by the ARM linkerArd Biesheuvel
When linking large kernels on ARM, the linker will insert veneers (i.e., PLT like stubs) when function symbols are out of reach for the ordinary relative branch/branch-and-link instructions. However, due to the fact that the kallsyms region sits in .rodata, which is between .text and .init.text, additional veneers may be emitted in the second pass due to the fact that the size of the kallsyms region itself has pushed the .init.text section further apart, requiring even more veneers. So ignore the veneers when generating the symbol table. Veneers have no corresponding source code, and they will not turn up in backtraces anyway. This patch also lightly refactors the symbol_valid() function to use a local 'sym_name' rather than the obfuscated 'sym + 1' and 'sym + offset' Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Michal Marek <mmarek@suse.cz>
2014-10-02aarch64: filter $x from kallsymsKyle McMartin
Similar to ARM, AArch64 is generating $x and $d syms... which isn't terribly helpful when looking at %pF output and the like. Filter those out in kallsyms, modpost and when looking at module symbols. Seems simplest since none of these check EM_ARM anyway, to just add it to the strchr used, rather than trying to make things overly complicated. initcall_debug improves: dmesg_before.txt: initcall $x+0x0/0x154 [sg] returned 0 after 26331 usecs dmesg_after.txt: initcall init_sg+0x0/0x154 [sg] returned 0 after 15461 usecs Signed-off-by: Kyle McMartin <kyle@redhat.com> Acked-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2014-06-10kbuild: trivial - use tabs for code indent where possibleMasahiro Yamada
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Signed-off-by: Michal Marek <mmarek@suse.cz>
2014-03-17kallsyms: fix percpu vars on x86-64 with relocation.Rusty Russell
x86-64 has a problem: per-cpu variables are actually represented by their absolute offsets within the per-cpu area, but the symbols are not emitted as absolute. Thus kallsyms naively creates them as offsets from _text, meaning their values change if the kernel is relocated (especially noticeable with CONFIG_RANDOMIZE_BASE): $ egrep ' (gdt_|_(stext|_per_cpu_))' /root/kallsyms.nokaslr 0000000000000000 D __per_cpu_start 0000000000004000 D gdt_page 0000000000014280 D __per_cpu_end ffffffff810001c8 T _stext ffffffff81ee53c0 D __per_cpu_offset $ egrep ' (gdt_|_(stext|_per_cpu_))' /root/kallsyms.kaslr1 000000001f200000 D __per_cpu_start 000000001f204000 D gdt_page 000000001f214280 D __per_cpu_end ffffffffa02001c8 T _stext ffffffffa10e53c0 D __per_cpu_offset Making them absolute symbols is the Right Thing, but requires fixes to the relocs tool. So for the moment, we add a --absolute-percpu option which makes them absolute from a kallsyms perspective: $ egrep ' (gdt_|_(stext|_per_cpu_))' /proc/kallsyms # no KASLR 0000000000000000 A __per_cpu_start 000000000000a000 A gdt_page 0000000000013040 A __per_cpu_end ffffffff802001c8 T _stext ffffffff8099b180 D __per_cpu_offset ffffffff809a3000 D __per_cpu_load $ egrep ' (gdt_|_(stext|_per_cpu_))' /proc/kallsyms # With KASLR 0000000000000000 A __per_cpu_start 000000000000a000 A gdt_page 0000000000013040 A __per_cpu_end ffffffff89c001c8 T _stext ffffffff8a39d180 D __per_cpu_offset ffffffff8a3a5000 D __per_cpu_load Based-on-the-original-screenplay-by: Andy Honig <ahonig@google.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Acked-by: Kees Cook <keescook@chromium.org>
2014-03-17kallsyms: generalize address range checkingKees Cook
This refactors the address range checks to be generalized instead of specific to text range checks, in preparation for other range checks. Also extracts logic for "is the symbol absolute" into a function. Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2014-03-10revert "kallsyms: fix absolute addresses for kASLR"Andrew Morton
Revert the recently applied 0f55159d091c ("kallsyms: fix absolute addresses for kASLR"). Kees said : This got NAKed, please don't apply -- this patch works for x86 and : ARM, but may cause problems for others: : : https://lkml.org/lkml/2014/2/24/718 It appears that Kees will be fixing all this up for 3.15. Cc: Andy Honig <ahonig@google.com> Cc: Kees Cook <keescook@chromium.org> Cc: Michal Marek <mmarek@suse.cz> Cc: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-03-04kallsyms: fix absolute addresses for kASLRAndy Honig
Currently symbols that are absolute addresses are incorrectly displayed in /proc/kallsyms if the kernel is loaded with kASLR. The problem was that the scripts/kallsyms.c file which generates the array of symbol names and addresses uses an relocatable value for all symbols, even absolute symbols. This patch fixes that. Several kallsyms output in different boot states for comparison: $ egrep '_(stext|_per_cpu_(start|end))' /root/kallsyms.nokaslr 0000000000000000 D __per_cpu_start 0000000000014280 D __per_cpu_end ffffffff810001c8 T _stext $ egrep '_(stext|_per_cpu_(start|end))' /root/kallsyms.kaslr1 000000001f200000 D __per_cpu_start 000000001f214280 D __per_cpu_end ffffffffa02001c8 T _stext $ egrep '_(stext|_per_cpu_(start|end))' /root/kallsyms.kaslr2 000000000d400000 D __per_cpu_start 000000000d414280 D __per_cpu_end ffffffff8e4001c8 T _stext $ egrep '_(stext|_per_cpu_(start|end))' /root/kallsyms.kaslr-fixed 0000000000000000 D __per_cpu_start 0000000000014280 D __per_cpu_end ffffffffadc001c8 T _stext Signed-off-by: Andy Honig <ahonig@google.com> Signed-off-by: Kees Cook <keescook@chromium.org> Cc: Michal Marek <mmarek@suse.cz> Cc: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-15Merge branch 'kbuild' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild Pull kbuild changes from Michal Marek: - LTO fixes, but the kallsyms part had to be reverted - Pass -Werror=implicit-int and -Werror=strict-prototypes to the compiler by default - snprintf fix in modpost - remove GREP_OPTIONS from the environment to be immune against exotic grep option settings * 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild: kallsyms: Revert back to 128 max symbol length Kbuild: Ignore GREP_OPTIONS env variable scripts: kallsyms: Use %zu to print 'size_t' scripts/bloat-o-meter: use .startswith rather than fragile slicing scripts/bloat-o-meter: ignore changes in the size of linux_banner kbuild: replace unbounded sprintf call in modpost kbuild, bloat-o-meter: fix static detection Kbuild: Handle longer symbols in kallsyms.c kbuild: Increase kallsyms max symbol length Makefile: enable -Werror=implicit-int and -Werror=strict-prototypes by default
2013-11-13kallsyms: Revert back to 128 max symbol lengthMichal Marek
This reverts commits f3462aa (Kbuild: Handle longer symbols in kallsyms.c) and eea0e9c (kbuild: Increase kallsyms max symbol length) except for the added overflow check. The reason is a regression caused by increasing the buffer: http://marc.info/?l=linux-kernel&m=138387700415675. Reported-by: Fengguang Wu <fengguang.wu@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Joe Mario <jmario@redhat.com> Signed-off-by: Michal Marek <mmarek@suse.cz>
2013-11-08scripts: kallsyms: Use %zu to print 'size_t'Fabio Estevam
Commit f3462aa95 (Kbuild: Handle longer symbols in kallsyms.c) introduced the following warning on ARM: scripts/kallsyms.c:121:4: warning: format '%lu' expects argument of type 'long unsigned int', but argument 4 has type 'size_t' [-Wformat] Use %zu to print 'size_t'. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Michal Marek <mmarek@suse.cz>
2013-11-06Kbuild: Handle longer symbols in kallsyms.cAndi Kleen
Also warn for too long symbols v2: Add missing newline. Use 255 max (Joe Perches) Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Michal Marek <mmarek@suse.cz>
2013-11-02scripts/kallsyms: filter symbols not in kernel address spaceMing Lei
This patch uses CONFIG_PAGE_OFFSET to filter symbols which are not in kernel address space because these symbols are generally for generating code purpose and can't be run at kernel mode, so we needn't keep them in /proc/kallsyms. For example, on ARM there are some symbols which may be linked in relocatable code section, then perf can't parse symbols any more from /proc/kallsyms, this patch fixes the problem (introduced b9b32bf70f2fb710b07c94e13afbc729afe221da) Cc: Russell King <linux@arm.linux.org.uk> Cc: linux-arm-kernel@lists.infradead.org Cc: Michal Marek <mmarek@suse.cz> Signed-off-by: Ming Lei <tom.leiming@gmail.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Cc: stable@vger.kernel.org
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-12 16:57:01 +0000