| Age | Commit message (Collapse) | Author |
|---|
|
Something changed recently to uncover this warning:
samples/vfs/test-statx.c:24:15: warning: `struct foo' declared inside parameter list will not be visible outside of this definition or declaration
24 | #define statx foo
| ^~~
Which is due the use of "struct statx" (here, "struct foo") in a function
prototype argument list before it has been defined:
int
# 56 "/usr/include/x86_64-linux-gnu/bits/statx-generic.h"
foo
# 56 "/usr/include/x86_64-linux-gnu/bits/statx-generic.h" 3 4
(int __dirfd, const char *__restrict __path, int __flags,
unsigned int __mask, struct
# 57 "/usr/include/x86_64-linux-gnu/bits/statx-generic.h"
foo
# 57 "/usr/include/x86_64-linux-gnu/bits/statx-generic.h" 3 4
*__restrict __buf)
__attribute__ ((__nothrow__ , __leaf__)) __attribute__ ((__nonnull__ (2, 5)));
Add explicit struct before #include to avoid warning.
Fixes: f1b5618e013a ("vfs: Add a sample program for the new mount API")
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Miklos Szeredi <mszeredi@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: David Howells <dhowells@redhat.com>
Link: http://lkml.kernel.org/r/202006282213.C516EA6@keescook
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Pull networking fixes from David Miller:
1) Don't insert ESP trailer twice in IPSEC code, from Huy Nguyen.
2) The default crypto algorithm selection in Kconfig for IPSEC is out
of touch with modern reality, fix this up. From Eric Biggers.
3) bpftool is missing an entry for BPF_MAP_TYPE_RINGBUF, from Andrii
Nakryiko.
4) Missing init of ->frame_sz in xdp_convert_zc_to_xdp_frame(), from
Hangbin Liu.
5) Adjust packet alignment handling in ax88179_178a driver to match
what the hardware actually does. From Jeremy Kerr.
6) register_netdevice can leak in the case one of the notifiers fail,
from Yang Yingliang.
7) Use after free in ip_tunnel_lookup(), from Taehee Yoo.
8) VLAN checks in sja1105 DSA driver need adjustments, from Vladimir
Oltean.
9) tg3 driver can sleep forever when we get enough EEH errors, fix from
David Christensen.
10) Missing {READ,WRITE}_ONCE() annotations in various Intel ethernet
drivers, from Ciara Loftus.
11) Fix scanning loop break condition in of_mdiobus_register(), from
Florian Fainelli.
12) MTU limit is incorrect in ibmveth driver, from Thomas Falcon.
13) Endianness fix in mlxsw, from Ido Schimmel.
14) Use after free in smsc95xx usbnet driver, from Tuomas Tynkkynen.
15) Missing bridge mrp configuration validation, from Horatiu Vultur.
16) Fix circular netns references in wireguard, from Jason A. Donenfeld.
17) PTP initialization on recovery is not done properly in qed driver,
from Alexander Lobakin.
18) Endian conversion of L4 ports in filters of cxgb4 driver is wrong,
from Rahul Lakkireddy.
19) Don't clear bound device TX queue of socket prematurely otherwise we
get problems with ktls hw offloading, from Tariq Toukan.
20) ipset can do atomics on unaligned memory, fix from Russell King.
21) Align ethernet addresses properly in bridging code, from Thomas
Martitz.
22) Don't advertise ipv4 addresses on SCTP sockets having ipv6only set,
from Marcelo Ricardo Leitner.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (149 commits)
rds: transport module should be auto loaded when transport is set
sch_cake: fix a few style nits
sch_cake: don't call diffserv parsing code when it is not needed
sch_cake: don't try to reallocate or unshare skb unconditionally
ethtool: fix error handling in linkstate_prepare_data()
wil6210: account for napi_gro_receive never returning GRO_DROP
hns: do not cast return value of napi_gro_receive to null
socionext: account for napi_gro_receive never returning GRO_DROP
wireguard: receive: account for napi_gro_receive never returning GRO_DROP
vxlan: fix last fdb index during dump of fdb with nhid
sctp: Don't advertise IPv4 addresses if ipv6only is set on the socket
tc-testing: avoid action cookies with odd length.
bpf: tcp: bpf_cubic: fix spurious HYSTART_DELAY exit upon drop in min RTT
tcp_cubic: fix spurious HYSTART_DELAY exit upon drop in min RTT
net: dsa: sja1105: fix tc-gate schedule with single element
net: dsa: sja1105: recalculate gating subschedule after deleting tc-gate rules
net: dsa: sja1105: unconditionally free old gating config
net: dsa: sja1105: move sja1105_compose_gating_subschedule at the top
net: macb: free resources on failure path of at91ether_open()
net: macb: call pm_runtime_put_sync on failure path
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- fix -gz=zlib compiler option test for CONFIG_DEBUG_INFO_COMPRESSED
- improve cc-option in scripts/Kbuild.include to clean up temp files
- improve cc-option in scripts/Kconfig.include for more reliable
compile option test
- do not copy modules.builtin by 'make install' because it would break
existing systems
- use 'userprogs' syntax for watch_queue sample
* tag 'kbuild-fixes-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
samples: watch_queue: build sample program for target architecture
Revert "Makefile: install modules.builtin even if CONFIG_MODULES=n"
scripts: Fix typo in headers_install.sh
kconfig: unify cc-option and as-option
kbuild: improve cc-option to clean up all temporary files
Makefile: Improve compressed debug info support detection
|
|
This userspace program includes UAPI headers exported to usr/include/.
'make headers' always works for the target architecture (i.e. the same
architecture as the kernel), so the sample program should be built for
the target as well. Kbuild now supports 'userprogs' for that.
I also guarded the CONFIG option by 'depends on CC_CAN_LINK' because
$(CC) may not provide libc.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fixes from Steven Rostedt:
- Have recordmcount work with > 64K sections (to support LTO)
- kprobe RCU fixes
- Correct a kprobe critical section with missing mutex
- Remove redundant arch_disarm_kprobe() call
- Fix lockup when kretprobe triggers within kprobe_flush_task()
- Fix memory leak in fetch_op_data operations
- Fix sleep in atomic in ftrace trace array sample code
- Free up memory on failure in sample trace array code
- Fix incorrect reporting of function_graph fields in format file
- Fix quote within quote parsing in bootconfig
- Fix return value of bootconfig tool
- Add testcases for bootconfig tool
- Fix maybe uninitialized warning in ftrace pid file code
- Remove unused variable in tracing_iter_reset()
- Fix some typos
* tag 'trace-v5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
ftrace: Fix maybe-uninitialized compiler warning
tools/bootconfig: Add testcase for show-command and quotes test
tools/bootconfig: Fix to return 0 if succeeded to show the bootconfig
tools/bootconfig: Fix to use correct quotes for value
proc/bootconfig: Fix to use correct quotes for value
tracing: Remove unused event variable in tracing_iter_reset
tracing/probe: Fix memleak in fetch_op_data operations
trace: Fix typo in allocate_ftrace_ops()'s comment
tracing: Make ftrace packed events have align of 1
sample-trace-array: Remove trace_array 'sample-instance'
sample-trace-array: Fix sleeping function called from invalid context
kretprobe: Prevent triggering kretprobe from within kprobe_flush_task
kprobes: Remove redundant arch_disarm_kprobe() call
kprobes: Fix to protect kick_kprobe_optimizer() by kprobe_mutex
kprobes: Use non RCU traversal APIs on kprobe_tables if possible
kprobes: Suppress the suspicious RCU warning on kprobes
recordmcount: support >64k sections
|
|
Alexei Starovoitov says:
====================
pull-request: bpf 2020-06-17
The following pull-request contains BPF updates for your *net* tree.
We've added 10 non-merge commits during the last 2 day(s) which contain
a total of 14 files changed, 158 insertions(+), 59 deletions(-).
The main changes are:
1) Important fix for bpf_probe_read_kernel_str() return value, from Andrii.
2) [gs]etsockopt fix for large optlen, from Stanislav.
3) devmap allocation fix, from Toke.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Remove trace_array 'sample-instance' if kthread_run fails
in sample_trace_array_init().
Link: https://lkml.kernel.org/r/20200609135200.2206726-1-wangkefeng.wang@huawei.com
Cc: stable@vger.kernel.org
Fixes: 89ed42495ef4a ("tracing: Sample module to demonstrate kernel access to Ftrace instances.")
Reviewed-by: Divya Indi <divya.indi@oracle.com>
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
BUG: sleeping function called from invalid context at kernel/locking/mutex.c:935
in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 0, name: swapper/5
1 lock held by swapper/5/0:
#0: ffff80001002bd90 (samples/ftrace/sample-trace-array.c:38){+.-.}-{0:0}, at: call_timer_fn+0x8/0x3e0
CPU: 5 PID: 0 Comm: swapper/5 Not tainted 5.7.0+ #8
Hardware name: QEMU QEMU Virtual Machine, BIOS 0.0.0 02/06/2015
Call trace:
dump_backtrace+0x0/0x1a0
show_stack+0x20/0x30
dump_stack+0xe4/0x150
___might_sleep+0x160/0x200
__might_sleep+0x58/0x90
__mutex_lock+0x64/0x948
mutex_lock_nested+0x3c/0x58
__ftrace_set_clr_event+0x44/0x88
trace_array_set_clr_event+0x24/0x38
mytimer_handler+0x34/0x40 [sample_trace_array]
mutex_lock() will be called in interrupt context, using workqueue to fix it.
Link: https://lkml.kernel.org/r/20200610011244.2209486-1-wangkefeng.wang@huawei.com
Cc: stable@vger.kernel.org
Fixes: 89ed42495ef4 ("tracing: Sample module to demonstrate kernel access to Ftrace instances.")
Reviewed-by: Divya Indi <divya.indi@oracle.com>
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
Memset on the pointer right after malloc can cause a NULL pointer
deference if it failed to allocate memory. A simple fix is to
replace malloc()/memset() pair with a simple call to calloc().
Fixes: 0fca931a6f21 ("samples/bpf: program demonstrating access to xdp_rxq_info")
Signed-off-by: Gaurav Singh <gaurav1086@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
|
|
There is a regular need in the kernel to provide a way to declare having a
dynamically sized set of trailing elements in a structure. Kernel code should
always use “flexible array members”[1] for these cases. The older style of
one-element or zero-length arrays should no longer be used[2].
[1] https://en.wikipedia.org/wiki/Flexible_array_member
[2] https://github.com/KSPP/linux/issues/21
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
|
|
Let's keep "git status" happy and quiet.
Fixes: 9762dc1432e1 ("samples: add binderfs sample program
Fixes: fca5e94921d5 ("samples: binderfs: really compile this sample and fix build issues")
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull more Kbuild updates from Masahiro Yamada:
- fix build rules in binderfs sample
- fix build errors when Kbuild recurses to the top Makefile
- covert '---help---' in Kconfig to 'help'
* tag 'kbuild-v5.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
treewide: replace '---help---' in Kconfig files with 'help'
kbuild: fix broken builds because of GZIP,BZIP2,LZOP variables
samples: binderfs: really compile this sample and fix build issues
|
|
Let's keep "git status" happy and quiet.
Fixes: f5b5a164f9a1 ("Add sample notification program")
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs
Pull notification queue from David Howells:
"This adds a general notification queue concept and adds an event
source for keys/keyrings, such as linking and unlinking keys and
changing their attributes.
Thanks to Debarshi Ray, we do have a pull request to use this to fix a
problem with gnome-online-accounts - as mentioned last time:
https://gitlab.gnome.org/GNOME/gnome-online-accounts/merge_requests/47
Without this, g-o-a has to constantly poll a keyring-based kerberos
cache to find out if kinit has changed anything.
[ There are other notification pending: mount/sb fsinfo notifications
for libmount that Karel Zak and Ian Kent have been working on, and
Christian Brauner would like to use them in lxc, but let's see how
this one works first ]
LSM hooks are included:
- A set of hooks are provided that allow an LSM to rule on whether or
not a watch may be set. Each of these hooks takes a different
"watched object" parameter, so they're not really shareable. The
LSM should use current's credentials. [Wanted by SELinux & Smack]
- A hook is provided to allow an LSM to rule on whether or not a
particular message may be posted to a particular queue. This is
given the credentials from the event generator (which may be the
system) and the watch setter. [Wanted by Smack]
I've provided SELinux and Smack with implementations of some of these
hooks.
WHY
===
Key/keyring notifications are desirable because if you have your
kerberos tickets in a file/directory, your Gnome desktop will monitor
that using something like fanotify and tell you if your credentials
cache changes.
However, we also have the ability to cache your kerberos tickets in
the session, user or persistent keyring so that it isn't left around
on disk across a reboot or logout. Keyrings, however, cannot currently
be monitored asynchronously, so the desktop has to poll for it - not
so good on a laptop. This facility will allow the desktop to avoid the
need to poll.
DESIGN DECISIONS
================
- The notification queue is built on top of a standard pipe. Messages
are effectively spliced in. The pipe is opened with a special flag:
pipe2(fds, O_NOTIFICATION_PIPE);
The special flag has the same value as O_EXCL (which doesn't seem
like it will ever be applicable in this context)[?]. It is given up
front to make it a lot easier to prohibit splice&co from accessing
the pipe.
[?] Should this be done some other way? I'd rather not use up a new
O_* flag if I can avoid it - should I add a pipe3() system call
instead?
The pipe is then configured::
ioctl(fds[1], IOC_WATCH_QUEUE_SET_SIZE, queue_depth);
ioctl(fds[1], IOC_WATCH_QUEUE_SET_FILTER, &filter);
Messages are then read out of the pipe using read().
- It should be possible to allow write() to insert data into the
notification pipes too, but this is currently disabled as the
kernel has to be able to insert messages into the pipe *without*
holding pipe->mutex and the code to make this work needs careful
auditing.
- sendfile(), splice() and vmsplice() are disabled on notification
pipes because of the pipe->mutex issue and also because they
sometimes want to revert what they just did - but one or more
notification messages might've been interleaved in the ring.
- The kernel inserts messages with the wait queue spinlock held. This
means that pipe_read() and pipe_write() have to take the spinlock
to update the queue pointers.
- Records in the buffer are binary, typed and have a length so that
they can be of varying size.
This allows multiple heterogeneous sources to share a common
buffer; there are 16 million types available, of which I've used
just a few, so there is scope for others to be used. Tags may be
specified when a watchpoint is created to help distinguish the
sources.
- Records are filterable as types have up to 256 subtypes that can be
individually filtered. Other filtration is also available.
- Notification pipes don't interfere with each other; each may be
bound to a different set of watches. Any particular notification
will be copied to all the queues that are currently watching for it
- and only those that are watching for it.
- When recording a notification, the kernel will not sleep, but will
rather mark a queue as having lost a message if there's
insufficient space. read() will fabricate a loss notification
message at an appropriate point later.
- The notification pipe is created and then watchpoints are attached
to it, using one of:
keyctl_watch_key(KEY_SPEC_SESSION_KEYRING, fds[1], 0x01);
watch_mount(AT_FDCWD, "/", 0, fd, 0x02);
watch_sb(AT_FDCWD, "/mnt", 0, fd, 0x03);
where in both cases, fd indicates the queue and the number after is
a tag between 0 and 255.
- Watches are removed if either the notification pipe is destroyed or
the watched object is destroyed. In the latter case, a message will
be generated indicating the enforced watch removal.
Things I want to avoid:
- Introducing features that make the core VFS dependent on the
network stack or networking namespaces (ie. usage of netlink).
- Dumping all this stuff into dmesg and having a daemon that sits
there parsing the output and distributing it as this then puts the
responsibility for security into userspace and makes handling
namespaces tricky. Further, dmesg might not exist or might be
inaccessible inside a container.
- Letting users see events they shouldn't be able to see.
TESTING AND MANPAGES
====================
- The keyutils tree has a pipe-watch branch that has keyctl commands
for making use of notifications. Proposed manual pages can also be
found on this branch, though a couple of them really need to go to
the main manpages repository instead.
If the kernel supports the watching of keys, then running "make
test" on that branch will cause the testing infrastructure to spawn
a monitoring process on the side that monitors a notifications pipe
for all the key/keyring changes induced by the tests and they'll
all be checked off to make sure they happened.
https://git.kernel.org/pub/scm/linux/kernel/git/dhowells/keyutils.git/log/?h=pipe-watch
- A test program is provided (samples/watch_queue/watch_test) that
can be used to monitor for keyrings, mount and superblock events.
Information on the notifications is simply logged to stdout"
* tag 'notifications-20200601' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
smack: Implement the watch_key and post_notification hooks
selinux: Implement the watch_key security hook
keys: Make the KEY_NEED_* perms an enum rather than a mask
pipe: Add notification lossage handling
pipe: Allow buffers to be marked read-whole-or-error for notifications
Add sample notification program
watch_queue: Add a key/keyring notification facility
security: Add hooks to rule on setting a watch
pipe: Add general notification queue support
pipe: Add O_NOTIFICATION_PIPE
security: Add a hook for the point of notification insertion
uapi: General notification queue definitions
|
|
Even after commit c624adc9cb6e ("samples: fix binderfs sample"), this
sample is never compiled.
'hostprogs' teaches Kbuild that this is a host program, but not enough
to order to compile it. You must add it to 'always-y' to really compile
it.
Since this sample has never been compiled in upstream, various issues
are left unnoticed.
[1] compilers without <linux/android/binderfs.h> are still widely used
<linux/android/binderfs.h> is only available since commit c13295ad219d
("binderfs: rename header to binderfs.h"), i.e., Linux 5.0
If your compiler is based on UAPI headers older than Linux 5.0, you
will see the following error:
samples/binderfs/binderfs_example.c:16:10: fatal error: linux/android/binderfs.h: No such file or directory
#include <linux/android/binderfs.h>
^~~~~~~~~~~~~~~~~~~~~~~~~~
compilation terminated.
You cannot rely on compilers having such a new header.
The common approach is to install UAPI headers of this kernel into
usr/include, and then add it to the header search path.
I added 'depends on HEADERS_INSTALL' in Kconfig, and '-I usr/include'
compiler flag in Makefile.
[2] compile the sample for target architecture
Because headers_install works for the target architecture, only the
native compiler was able to build sample code that requires
'-I usr/include'.
Commit 7f3a59db274c ("kbuild: add infrastructure to build userspace
programs") added the new syntax 'userprogs' to compile user-space
programs for the target architecture.
Use it, and then 'ifndef CROSS_COMPILE' will go away.
I added 'depends on CC_CAN_LINK' because $(CC) is not necessarily
capable of linking user-space programs.
[3] use subdir-y to descend into samples/binderfs
Since this directory does not contain any kernel-space code, it has no
point in generating built-in.a or modules.order.
Replace obj-$(CONFIG_...) with subdir-$(CONFIG_...).
[4] -Wunused-variable warning
If I compile this, I see the following warning.
samples/binderfs/binderfs_example.c: In function 'main':
samples/binderfs/binderfs_example.c:21:9: warning: unused variable 'len' [-Wunused-variable]
21 | size_t len;
| ^~~
I removed the unused 'len'.
[5] CONFIG_ANDROID_BINDERFS is not required
Since this is a user-space standalone program, it is independent of
the kernel configuration.
Remove 'depends on ANDROID_BINDERFS'.
Fixes: 9762dc1432e1 ("samples: add binderfs sample program")
Fixes: c624adc9cb6e ("samples: fix binderfs sample")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- fix warnings in 'make clean' for ARCH=um, hexagon, h8300, unicore32
- ensure to rebuild all objects when the compiler is upgraded
- exclude system headers from dependency tracking and fixdep processing
- fix potential bit-size mismatch between the kernel and BPF user-mode
helper
- add the new syntax 'userprogs' to build user-space programs for the
target architecture (the same arch as the kernel)
- compile user-space sample code under samples/ for the target arch
instead of the host arch
- make headers_install fail if a CONFIG option is leaked to user-space
- sanitize the output format of scripts/checkstack.pl
- handle ARM 'push' instruction in scripts/checkstack.pl
- error out before modpost if a module name conflict is found
- error out when multiple directories are passed to M= because this
feature is broken for a long time
- add CONFIG_DEBUG_INFO_COMPRESSED to support compressed debug info
- a lot of cleanups of modpost
- dump vmlinux symbols out into vmlinux.symvers, and reuse it in the
second pass of modpost
- do not run the second pass of modpost if nothing in modules is
updated
- install modules.builtin(.modinfo) by 'make install' as well as by
'make modules_install' because it is useful even when
CONFIG_MODULES=n
- add new command line variables, GZIP, BZIP2, LZOP, LZMA, LZ4, and XZ
to allow users to use alternatives such as pigz, pbzip2, etc.
* tag 'kbuild-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (96 commits)
kbuild: add variables for compression tools
Makefile: install modules.builtin even if CONFIG_MODULES=n
mksysmap: Fix the mismatch of '.L' symbols in System.map
kbuild: doc: rename LDFLAGS to KBUILD_LDFLAGS
modpost: change elf_info->size to size_t
modpost: remove is_vmlinux() helper
modpost: strip .o from modname before calling new_module()
modpost: set have_vmlinux in new_module()
modpost: remove mod->skip struct member
modpost: add mod->is_vmlinux struct member
modpost: remove is_vmlinux() call in check_for_{gpl_usage,unused}()
modpost: remove mod->is_dot_o struct member
modpost: move -d option in scripts/Makefile.modpost
modpost: remove -s option
modpost: remove get_next_text() and make {grab,release_}file static
modpost: use read_text_file() and get_line() for reading text files
modpost: avoid false-positive file open error
modpost: fix potential mmap'ed file overrun in get_src_version()
modpost: add read_text_file() and get_line() helpers
modpost: do not call get_modinfo() for vmlinux(.o)
...
|
|
Pull networking updates from David Miller:
1) Allow setting bluetooth L2CAP modes via socket option, from Luiz
Augusto von Dentz.
2) Add GSO partial support to igc, from Sasha Neftin.
3) Several cleanups and improvements to r8169 from Heiner Kallweit.
4) Add IF_OPER_TESTING link state and use it when ethtool triggers a
device self-test. From Andrew Lunn.
5) Start moving away from custom driver versions, use the globally
defined kernel version instead, from Leon Romanovsky.
6) Support GRO vis gro_cells in DSA layer, from Alexander Lobakin.
7) Allow hard IRQ deferral during NAPI, from Eric Dumazet.
8) Add sriov and vf support to hinic, from Luo bin.
9) Support Media Redundancy Protocol (MRP) in the bridging code, from
Horatiu Vultur.
10) Support netmap in the nft_nat code, from Pablo Neira Ayuso.
11) Allow UDPv6 encapsulation of ESP in the ipsec code, from Sabrina
Dubroca. Also add ipv6 support for espintcp.
12) Lots of ReST conversions of the networking documentation, from Mauro
Carvalho Chehab.
13) Support configuration of ethtool rxnfc flows in bcmgenet driver,
from Doug Berger.
14) Allow to dump cgroup id and filter by it in inet_diag code, from
Dmitry Yakunin.
15) Add infrastructure to export netlink attribute policies to
userspace, from Johannes Berg.
16) Several optimizations to sch_fq scheduler, from Eric Dumazet.
17) Fallback to the default qdisc if qdisc init fails because otherwise
a packet scheduler init failure will make a device inoperative. From
Jesper Dangaard Brouer.
18) Several RISCV bpf jit optimizations, from Luke Nelson.
19) Correct the return type of the ->ndo_start_xmit() method in several
drivers, it's netdev_tx_t but many drivers were using
'int'. From Yunjian Wang.
20) Add an ethtool interface for PHY master/slave config, from Oleksij
Rempel.
21) Add BPF iterators, from Yonghang Song.
22) Add cable test infrastructure, including ethool interfaces, from
Andrew Lunn. Marvell PHY driver is the first to support this
facility.
23) Remove zero-length arrays all over, from Gustavo A. R. Silva.
24) Calculate and maintain an explicit frame size in XDP, from Jesper
Dangaard Brouer.
25) Add CAP_BPF, from Alexei Starovoitov.
26) Support terse dumps in the packet scheduler, from Vlad Buslov.
27) Support XDP_TX bulking in dpaa2 driver, from Ioana Ciornei.
28) Add devm_register_netdev(), from Bartosz Golaszewski.
29) Minimize qdisc resets, from Cong Wang.
30) Get rid of kernel_getsockopt and kernel_setsockopt in order to
eliminate set_fs/get_fs calls. From Christoph Hellwig.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2517 commits)
selftests: net: ip_defrag: ignore EPERM
net_failover: fixed rollback in net_failover_open()
Revert "tipc: Fix potential tipc_aead refcnt leak in tipc_crypto_rcv"
Revert "tipc: Fix potential tipc_node refcnt leak in tipc_rcv"
vmxnet3: allow rx flow hash ops only when rss is enabled
hinic: add set_channels ethtool_ops support
selftests/bpf: Add a default $(CXX) value
tools/bpf: Don't use $(COMPILE.c)
bpf, selftests: Use bpf_probe_read_kernel
s390/bpf: Use bcr 0,%0 as tail call nop filler
s390/bpf: Maintain 8-byte stack alignment
selftests/bpf: Fix verifier test
selftests/bpf: Fix sample_cnt shared between two threads
bpf, selftests: Adapt cls_redirect to call csum_level helper
bpf: Add csum_level helper for fixing up csum levels
bpf: Fix up bpf_skb_adjust_room helper's skb csum setting
sfc: add missing annotation for efx_ef10_try_update_nic_stats_vf()
crypto/chtls: IPv6 support for inline TLS
Crypto/chcr: Fixes a coccinile check error
Crypto/chcr: Fixes compilations warnings
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs updates from Al Viro:
"Assorted patches from Miklos.
An interesting part here is /proc/mounts stuff..."
The "/proc/mounts stuff" is using a cursor for keeeping the location
data while traversing the mount listing.
Also probably worth noting is the addition of faccessat2(), which takes
an additional set of flags to specify how the lookup is done
(AT_EACCESS, AT_SYMLINK_NOFOLLOW, AT_EMPTY_PATH).
* 'from-miklos' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
vfs: add faccessat2 syscall
vfs: don't parse "silent" option
vfs: don't parse "posixacl" option
vfs: don't parse forbidden flags
statx: add mount_root
statx: add mount ID
statx: don't clear STATX_ATIME on SB_RDONLY
uapi: deprecate STATX_ALL
utimensat: AT_EMPTY_PATH support
vfs: split out access_override_creds()
proc/mounts: add cursor
aio: fix async fsync creds
vfs: allow unprivileged whiteout creation
|
|
Pull documentation updates from Jonathan Corbet:
"A fair amount of stuff this time around, dominated by yet another
massive set from Mauro toward the completion of the RST conversion. I
*really* hope we are getting close to the end of this. Meanwhile,
those patches reach pretty far afield to update document references
around the tree; there should be no actual code changes there. There
will be, alas, more of the usual trivial merge conflicts.
Beyond that we have more translations, improvements to the sphinx
scripting, a number of additions to the sysctl documentation, and lots
of fixes"
* tag 'docs-5.8' of git://git.lwn.net/linux: (130 commits)
Documentation: fixes to the maintainer-entry-profile template
zswap: docs/vm: Fix typo accept_threshold_percent in zswap.rst
tracing: Fix events.rst section numbering
docs: acpi: fix old http link and improve document format
docs: filesystems: add info about efivars content
Documentation: LSM: Correct the basic LSM description
mailmap: change email for Ricardo Ribalda
docs: sysctl/kernel: document unaligned controls
Documentation: admin-guide: update bug-hunting.rst
docs: sysctl/kernel: document ngroups_max
nvdimm: fixes to maintainter-entry-profile
Documentation/features: Correct RISC-V kprobes support entry
Documentation/features: Refresh the arch support status files
Revert "docs: sysctl/kernel: document ngroups_max"
docs: move locking-specific documents to locking/
docs: move digsig docs to the security book
docs: move the kref doc into the core-api book
docs: add IRQ documentation at the core-api book
docs: debugging-via-ohci1394.txt: add it to the core-api book
docs: fix references for ipmi.rst file
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull objtool updates from Ingo Molnar:
"There are a lot of objtool changes in this cycle, all across the map:
- Speed up objtool significantly, especially when there are large
number of sections
- Improve objtool's understanding of special instructions such as
IRET, to reduce the number of annotations required
- Implement 'noinstr' validation
- Do baby steps for non-x86 objtool use
- Simplify/fix retpoline decoding
- Add vmlinux validation
- Improve documentation
- Fix various bugs and apply smaller cleanups"
* tag 'objtool-core-2020-06-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (54 commits)
objtool: Enable compilation of objtool for all architectures
objtool: Move struct objtool_file into arch-independent header
objtool: Exit successfully when requesting help
objtool: Add check_kcov_mode() to the uaccess safelist
samples/ftrace: Fix asm function ELF annotations
objtool: optimize add_dead_ends for split sections
objtool: use gelf_getsymshndx to handle >64k sections
objtool: Allow no-op CFI ops in alternatives
x86/retpoline: Fix retpoline unwind
x86: Change {JMP,CALL}_NOSPEC argument
x86: Simplify retpoline declaration
x86/speculation: Change FILL_RETURN_BUFFER to work with objtool
objtool: Add support for intra-function calls
objtool: Move the IRET hack into the arch decoder
objtool: Remove INSN_STACK
objtool: Make handle_insn_ops() unconditional
objtool: Rework allocating stack_ops on decode
objtool: UNWIND_HINT_RET_OFFSET should not check registers
objtool: is_fentry_call() crashes if call has no destination
x86,smap: Fix smap_{save,restore}() alternatives
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull kprobes updates from Ingo Molnar:
"Various kprobes updates, mostly centered around cleaning up the
no-instrumentation logic.
Instead of the current per debug facility blacklist, use the more
generic .noinstr.text approach, combined with a 'noinstr' marker for
functions.
Also add instrumentation_begin()/end() to better manage the exact
place in entry code where instrumentation may be used.
And add a kprobes blacklist for modules"
* tag 'core-kprobes-2020-06-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
kprobes: Prevent probes in .noinstr.text section
vmlinux.lds.h: Create section for protection against instrumentation
samples/kprobes: Add __kprobes and NOKPROBE_SYMBOL() for handlers.
kprobes: Support NOKPROBE_SYMBOL() in modules
kprobes: Support __kprobes blacklist in modules
kprobes: Lock kprobe_mutex while showing kprobe_blacklist
|
|
Enable objtool coverage for the sample ftrace modules by adding ELF
annotations to the asm trampoline functions.
samples/ftrace/ftrace-direct.o: warning: objtool: .text+0x0: unreachable instruction
samples/ftrace/ftrace-direct-modify.o: warning: objtool: .text+0x0: unreachable instruction
samples/ftrace/ftrace-direct-too.o: warning: objtool: .text+0x0: unreachable instruction
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
|
|
Because the previous two commit replaced the bpf_load implementation of
the user program with libbpf, the corresponding kernel program's MAP
definition can be replaced with new BTF-defined map syntax.
This commit only updates the samples which uses libbpf API for loading
bpf program not with bpf_load.
Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20200516040608.1377876-6-danieltimlee@gmail.com
|
|
This commit adds tracex7 test file (testfile.img) to .gitignore which
comes from test_override_return.sh.
Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20200516040608.1377876-5-danieltimlee@gmail.com
|
|
BPF tail call uses the BPF_MAP_TYPE_PROG_ARRAY type map for calling
into other BPF programs and this PROG_ARRAY should be filled prior to
use. Currently, samples with the PROG_ARRAY type MAP fill this program
array with bpf_load. For bpf_load to fill this map, kernel BPF program
must specify the section with specific format of <prog_type>/<array_idx>
(e.g. SEC("socket/0"))
But by using libbpf instead of bpf_load, user program can specify which
programs should be added to PROG_ARRAY. The advantage of this approach
is that you can selectively add only the programs you want, rather than
adding all of them to PROG_ARRAY, and it's much more intuitive than the
traditional approach.
This commit refactors user programs with the PROG_ARRAY type MAP with
libbpf instead of using bpf_load.
Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20200516040608.1377876-4-danieltimlee@gmail.com
|
|
Currently, the kprobe BPF program attachment method for bpf_load is
quite old. The implementation of bpf_load "directly" controls and
manages(create, delete) the kprobe events of DEBUGFS. On the other hand,
using using the libbpf automatically manages the kprobe event.
(under bpf_link interface)
By calling bpf_program__attach(_kprobe) in libbpf, the corresponding
kprobe is created and the BPF program will be attached to this kprobe.
To remove this, by simply invoking bpf_link__destroy will clean up the
event.
This commit refactors kprobe tracing programs (tracex{1~7}_user.c) with
libbpf using bpf_link interface and bpf_program__attach.
tracex2_kern.c, which tracks system calls (sys_*), has been modified to
append prefix depending on architecture.
Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20200516040608.1377876-3-danieltimlee@gmail.com
|
|
Current method of checking pointer error is not user friendly.
Especially the __must_check define makes this less intuitive.
Since, libbpf has an API libbpf_get_error() which checks pointer error,
this commit refactors existing pointer error check logic with libbpf.
Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20200516040608.1377876-2-danieltimlee@gmail.com
|
|
Add handling for loss of notifications by having read() insert a
loss-notification message after it has read the pipe buffer that was last
in the ring when the loss occurred.
Lossage can come about either by running out of notification descriptors or
by running out of space in the pipe ring.
Signed-off-by: David Howells <dhowells@redhat.com>
|
|
Allow a buffer to be marked such that read() must return the entire buffer
in one go or return ENOBUFS. Multiple buffers can be amalgamated into a
single read, but a short read will occur if the next "whole" buffer won't
fit.
This is useful for watch queue notifications to make sure we don't split a
notification across multiple reads, especially given that we need to
fabricate an overrun record under some circumstances - and that isn't in
the buffers.
Signed-off-by: David Howells <dhowells@redhat.com>
|
|
The sample program is run like:
./samples/watch_queue/watch_test
and watches "/" for mount changes and the current session keyring for key
changes:
# keyctl add user a a @s
1035096409
# keyctl unlink 1035096409 @s
producing:
# ./watch_test
read() = 16
NOTIFY[000]: ty=000001 sy=02 i=00000110
KEY 2ffc2e5d change=2[linked] aux=1035096409
read() = 16
NOTIFY[000]: ty=000001 sy=02 i=00000110
KEY 2ffc2e5d change=3[unlinked] aux=1035096409
Other events may be produced, such as with a failing disk:
read() = 22
NOTIFY[000]: ty=000003 sy=02 i=00000416
USB 3-7.7 dev-reset e=0 r=0
read() = 24
NOTIFY[000]: ty=000002 sy=06 i=00000418
BLOCK 00800050 e=6[critical medium] s=64000ef8
This corresponds to:
blk_update_request: critical medium error, dev sdf, sector 1677725432 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
in dmesg.
Signed-off-by: David Howells <dhowells@redhat.com>
|
|
Kbuild now supports the 'userprogs' syntax to compile userspace
programs for the same architecture as the kernel.
Add the entry to samples/Makefile to put this into the build bot
coverage.
I also added the CONFIG option guarded by 'depends on CC_CAN_LINK'
because $(CC) may not provide libc.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
|
|
Kbuild now supports the 'userprogs' syntax to compile userspace
programs for the same architecture as the kernel.
Add the entry to samples/Makefile to put this into the build bot
coverage.
I also added the CONFIG option guarded by 'depends on CC_CAN_LINK'
because $(CC) may not provide libc.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
|
|
Kbuild now supports the 'userprogs' syntax to compile userspace
programs for the same architecture as the kernel.
Add the entry to samples/Makefile to put this into the build bot
coverage.
I also added the CONFIG option guarded by 'depends on CC_CAN_LINK'
because $(CC) may not provide libc.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
|
|
This userspace program includes UAPI headers exported to usr/include/.
'make headers' always works for the target architecture (i.e. the same
architecture as the kernel), so the sample program should be built for
the target as well. Kbuild now supports 'userprogs' for that.
I also guarded the CONFIG option by 'depends on CC_CAN_LINK' because
$(CC) may not provide libc.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
|
|
This userspace program includes UAPI headers exported to usr/include/.
'make headers' always works for the target architecture (i.e. the same
architecture as the kernel), so the sample program should be built for
the target as well. Kbuild now supports 'userprogs' for that.
I also guarded the CONFIG option by 'depends on CC_CAN_LINK' because
$(CC) may not provide libc.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
|
|
These userspace programs include UAPI headers exported to usr/include/.
'make headers' always works for the target architecture (i.e. the same
architecture as the kernel), so the sample programs should be built for
the target as well. Kbuild now supports 'userprogs' for that.
I also guarded the CONFIG option by 'depends on CC_CAN_LINK' because
$(CC) may not provide libc.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
|
|
This userspace program includes UAPI headers exported to usr/include/.
'make headers' always works for the target architecture (i.e. the same
architecture as the kernel), so the sample program should be built for
the target as well. Kbuild now supports 'userprogs' for that.
$(CC) can always compile cn_text.o since it is the kenrel-space code,
but building ucon requires libc.
I guarded it by:
always-$(CONFIG_CC_CAN_LINK) := $(userprogs)
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
|
|
This userspace program includes UAPI headers exported to usr/include/.
'make headers' always works for the target architecture (i.e. the same
architecture as the kernel), so the sample program should be built for
the target as well. Kbuild now supports 'userprogs' for that.
I also guarded the CONFIG option by 'depends on CC_CAN_LINK' because
$(CC) may not provide libc.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
|
|
This userspace program includes UAPI headers exported to usr/include/.
'make headers' always works for the target architecture (i.e. the same
architecture as the kernel), so the sample program should be built for
the target as well. Kbuild now supports 'userprogs' for that.
Add the entry to samples/Makefile to put this into the build bot
coverage.
I also added the CONFIG option guarded by 'depends on CC_CAN_LINK'
because $(CC) may not provide libc.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
|
|
Fix warnings seen when building for 32-bit architecture.
Use "%xd" for arguments of type size_t to fix the warnings.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
These userspace programs include UAPI headers exported to usr/include/.
'make headers' always works for the target architecture (i.e. the same
architecture as the kernel), so the sample programs should be built for
the target as well. Kbuild now supports 'userprogs' for that.
I also guarded the CONFIG option by 'depends on CC_CAN_LINK' because
$(CC) may not provide libc.
The 'ifndef CROSS_COMPILE' is no longer needed.
BTW, the -m31 for s390 is left-over code. Commit 5a79859ae0f3 ("s390:
remove 31 bit support") killed it.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
|
|
Move the bpf verifier trace check into the new switch statement in
HEAD.
Resolve the overlapping changes in hinic, where bug fixes overlap
the addition of VF support.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Pull networking fixes from David Miller:
1) Fix sk_psock reference count leak on receive, from Xiyu Yang.
2) CONFIG_HNS should be invisible, from Geert Uytterhoeven.
3) Don't allow locking route MTUs in ipv6, RFCs actually forbid this,
from Maciej Żenczykowski.
4) ipv4 route redirect backoff wasn't actually enforced, from Paolo
Abeni.
5) Fix netprio cgroup v2 leak, from Zefan Li.
6) Fix infinite loop on rmmod in conntrack, from Florian Westphal.
7) Fix tcp SO_RCVLOWAT hangs, from Eric Dumazet.
8) Various bpf probe handling fixes, from Daniel Borkmann.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (68 commits)
selftests: mptcp: pm: rm the right tmp file
dpaa2-eth: properly handle buffer size restrictions
bpf: Restrict bpf_trace_printk()'s %s usage and add %pks, %pus specifier
bpf: Add bpf_probe_read_{user, kernel}_str() to do_refine_retval_range
bpf: Restrict bpf_probe_read{, str}() only to archs where they work
MAINTAINERS: Mark networking drivers as Maintained.
ipmr: Add lockdep expression to ipmr_for_each_table macro
ipmr: Fix RCU list debugging warning
drivers: net: hamradio: Fix suspicious RCU usage warning in bpqether.c
net: phy: broadcom: fix BCM54XX_SHD_SCR3_TRDDAPD value for BCM54810
tcp: fix error recovery in tcp_zerocopy_receive()
MAINTAINERS: Add Jakub to networking drivers.
MAINTAINERS: another add of Karsten Graul for S390 networking
drivers: ipa: fix typos for ipa_smp2p structure doc
pppoe: only process PADT targeted at local interfaces
selftests/bpf: Enforce returning 0 for fentry/fexit programs
bpf: Enforce returning 0 for fentry/fexit progs
net: stmmac: fix num_por initialization
security: Fix the default value of secid_to_secctx hook
libbpf: Fix register naming in PT_REGS s390 macros
...
|
|
xdp_redirect_cpu is currently failing in bpf_prog_load_xattr()
allocating cpu_map map if CONFIG_NR_CPUS is less than 64 since
cpu_map_alloc() requires max_entries to be less than NR_CPUS.
Set cpu_map max_entries according to NR_CPUS in xdp_redirect_cpu_kern.c
and get currently running cpus in xdp_redirect_cpu_user.c
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/374472755001c260158c4e4b22f193bdd3c56fb7.1589300442.git.lorenzo@kernel.org
|
|
GCC 10 is very strict about symbol clash, and lwt_len_hist_user contains
a symbol which clashes with libbpf:
/usr/bin/ld: samples/bpf/lwt_len_hist_user.o:(.bss+0x0): multiple definition of `bpf_log_buf'; samples/bpf/bpf_load.o:(.bss+0x8c0): first defined here
collect2: error: ld returned 1 exit status
bpf_log_buf here seems to be a leftover, so removing it.
Signed-off-by: Matteo Croce <mcroce@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20200511113234.80722-1-mcroce@redhat.com
|
|
Constants of the *_ALL type can be actively harmful due to the fact that
developers will usually fail to consider the possible effects of future
changes to the definition.
Deprecate STATX_ALL in the uapi, while no damage has been done yet.
We could keep something like this around in the kernel, but there's
actually no point, since all filesystems should be explicitly checking
flags that they support and not rely on the VFS masking unknown ones out: a
flag could be known to the VFS, yet not known to the filesystem.
Cc: David Howells <dhowells@redhat.com>
Cc: linux-api@vger.kernel.org
Cc: linux-man@vger.kernel.org
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
|
|
Commit 5fbc220862fc ("tools/libpf: Add offsetof/container_of macro
in bpf_helpers.h") added macros offsetof/container_of to
bpf_helpers.h. Unfortunately, it caused compilation warnings
below for a few samples/bpf programs:
In file included from /data/users/yhs/work/net-next/samples/bpf/sockex2_kern.c:4:
In file included from /data/users/yhs/work/net-next/include/uapi/linux/in.h:24:
In file included from /data/users/yhs/work/net-next/include/linux/socket.h:8:
In file included from /data/users/yhs/work/net-next/include/linux/uio.h:8:
/data/users/yhs/work/net-next/include/linux/kernel.h:992:9: warning: 'container_of' macro redefined [-Wmacro-redefined]
^
/data/users/yhs/work/net-next/tools/lib/bpf/bpf_helpers.h:46:9: note: previous definition is here
^
1 warning generated.
CLANG-bpf samples/bpf/sockex3_kern.o
In all these cases, bpf_helpers.h is included first, followed by other
standard headers. The macro container_of is defined unconditionally
in kernel.h, causing the compiler warning.
The fix is to move bpf_helpers.h after standard headers.
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200513180223.2949987-1-yhs@fb.com
|
|
Add __kprobes and NOKPROBE_SYMBOL() for sample kprobe handlers.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20200505134059.878578033@linutronix.de
|
|
This reverts commit 8728497895794d1f207a836e02dae762ad175d56.
samples/ contains only sub-directories.
Because OBJECT_FILES_NON_STANDARD does not work recursively,
this line has no effect.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
|
|
As the example below shows, DECLARE_EVENT_CLASS() is used instead of
DEFINE_EVENT_CLASS().
Link: http://lkml.kernel.org/r/20200428214959.11259-1-richard.weiyang@gmail.com
Signed-off-by: Wei Yang <richard.weiyang@gmail.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
