summaryrefslogtreecommitdiff
path: root/net
AgeCommit message (Collapse)Author
2017-09-20net: dsa: Utilize dsa_slave_dev_check()Florian Fainelli
Instead of open coding the check. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-20Revert "bridge: also trigger RTM_NEWLINK when interface is released from bridge"David S. Miller
This reverts commit 00ba4cb36da682c68dc87d1703a8aaffe2b4e9c5. Discussion with David Ahern determined that this change is actually not needed. Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-20udp: do rmem bulk free even if the rx sk queue is emptyPaolo Abeni
The commit 6b229cf77d68 ("udp: add batching to udp_rmem_release()") reduced greatly the cacheline contention between the BH and the US reader batching the rmem updates in most scenarios. Such optimization is explicitly avoided if the US reader is faster then BH processing. My fault, I initially suggested this kind of behavior due to concerns of possible regressions with small sk_rcvbuf values. Tests showed such concerns are misplaced, so this commit relaxes the condition for rmem bulk updates, obtaining small but measurable performance gain in the scenario described above. Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-20bridge: also trigger RTM_NEWLINK when interface is released from bridgeVincent Bernat
Currently, when an interface is released from a bridge via ioctl(), we get a RTM_DELLINK event through netlink: Deleted 2: dummy0: <BROADCAST,NOARP,UP,LOWER_UP> mtu 1500 master bridge0 state UNKNOWN link/ether 6e:23:c2:54:3a:b3 Userspace has to interpret that as a removal from the bridge, not as a complete removal of the interface. When an bridged interface is completely removed, we get two events: Deleted 2: dummy0: <BROADCAST,NOARP> mtu 1500 master bridge0 state DOWN link/ether 6e:23:c2:54:3a:b3 Deleted 2: dummy0: <BROADCAST,NOARP> mtu 1500 qdisc noop state DOWN group default link/ether 6e:23:c2:54:3a:b3 brd ff:ff:ff:ff:ff:ff In constrast, when an interface is released from a bond, we get a RTM_NEWLINK with only the new characteristics (no master): 3: dummy1: <BROADCAST,NOARP,SLAVE,UP,LOWER_UP> mtu 1500 qdisc noqueue master bond0 state UNKNOWN group default link/ether ae:dc:7a:8c:9a:3c brd ff:ff:ff:ff:ff:ff 3: dummy1: <BROADCAST,NOARP,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN group default link/ether ae:dc:7a:8c:9a:3c brd ff:ff:ff:ff:ff:ff 4: bond0: <BROADCAST,MULTICAST,MASTER,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP group default link/ether ae:dc:7a:8c:9a:3c brd ff:ff:ff:ff:ff:ff 3: dummy1: <BROADCAST,NOARP> mtu 1500 qdisc noqueue state DOWN group default link/ether ae:dc:7a:8c:9a:3c brd ff:ff:ff:ff:ff:ff 3: dummy1: <BROADCAST,NOARP> mtu 1500 qdisc noqueue state DOWN group default link/ether ca:c8:7b:66:f8:25 brd ff:ff:ff:ff:ff:ff 4: bond0: <BROADCAST,MULTICAST,MASTER,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP group default link/ether ae:dc:7a:8c:9a:3c brd ff:ff:ff:ff:ff:ff Userland may be confused by the fact we say a link is deleted while its characteristics are only modified. A first solution would have been to turn the RTM_DELLINK event in del_nbp() into a RTM_NEWLINK event. However, maybe some piece of userland is relying on this RTM_DELLINK to detect when a bridged interface is released. Instead, we also emit a RTM_NEWLINK event once the interface is released (without master info). Deleted 2: dummy0: <BROADCAST,NOARP,UP,LOWER_UP> mtu 1500 master bridge0 state UNKNOWN link/ether 8a:bb:e7:94:b1:f8 2: dummy0: <BROADCAST,NOARP,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN group default link/ether 8a:bb:e7:94:b1:f8 brd ff:ff:ff:ff:ff:ff This is done only when using ioctl(). When using Netlink, such an event is already automatically emitted in do_setlink(). Signed-off-by: Vincent Bernat <vincent@bernat.im> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-20ipv6: Use ipv6_authlen for len in ipv6_skip_exthdrXiang Gao
In ipv6_skip_exthdr, the lengh of AH header is computed manually as (hp->hdrlen+2)<<2. However, in include/linux/ipv6.h, a macro named ipv6_authlen is already defined for exactly the same job. This commit replaces the manual computation code with the macro. Signed-off-by: Xiang Gao <qasdfgtyuiop@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-19ipv4: speedup ipv6 tunnels dismantleEric Dumazet
Implement exit_batch() method to dismantle more devices per round. (rtnl_lock() ... unregister_netdevice_many() ... rtnl_unlock()) Tested: $ cat add_del_unshare.sh for i in `seq 1 40` do (for j in `seq 1 100` ; do unshare -n /bin/true >/dev/null ; done) & done wait ; grep net_namespace /proc/slabinfo Before patch : $ time ./add_del_unshare.sh net_namespace 126 282 5504 1 2 : tunables 8 4 0 : slabdata 126 282 0 real 1m38.965s user 0m0.688s sys 0m37.017s After patch: $ time ./add_del_unshare.sh net_namespace 135 291 5504 1 2 : tunables 8 4 0 : slabdata 135 291 0 real 0m22.117s user 0m0.728s sys 0m35.328s Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-19ipv6: speedup ipv6 tunnels dismantleEric Dumazet
Implement exit_batch() method to dismantle more devices per round. (rtnl_lock() ... unregister_netdevice_many() ... rtnl_unlock()) Tested: $ cat add_del_unshare.sh for i in `seq 1 40` do (for j in `seq 1 100` ; do unshare -n /bin/true >/dev/null ; done) & done wait ; grep net_namespace /proc/slabinfo Before patch : $ time ./add_del_unshare.sh net_namespace 110 267 5504 1 2 : tunables 8 4 0 : slabdata 110 267 0 real 3m25.292s user 0m0.644s sys 0m40.153s After patch: $ time ./add_del_unshare.sh net_namespace 126 282 5504 1 2 : tunables 8 4 0 : slabdata 126 282 0 real 1m38.965s user 0m0.688s sys 0m37.017s Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-19tcp: batch tcp_net_metrics_exitEric Dumazet
When dealing with a list of dismantling netns, we can scan tcp_metrics once, saving cpu cycles. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-19ipv6: addrlabel: per netns listEric Dumazet
Having a global list of labels do not scale to thousands of netns in the cloud era. This causes quadratic behavior on netns creation and deletion. This is time having a per netns list of ~10 labels. Tested: $ time perf record (for f in `seq 1 3000` ; do ip netns add tast$f; done) [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 3.637 MB perf.data (~158898 samples) ] real 0m20.837s # instead of 0m24.227s user 0m0.328s sys 0m20.338s # instead of 0m23.753s 16.17% ip [kernel.kallsyms] [k] netlink_broadcast_filtered 12.30% ip [kernel.kallsyms] [k] netlink_has_listeners 6.76% ip [kernel.kallsyms] [k] _raw_spin_lock_irqsave 5.78% ip [kernel.kallsyms] [k] memset_erms 5.77% ip [kernel.kallsyms] [k] kobject_uevent_env 5.18% ip [kernel.kallsyms] [k] refcount_sub_and_test 4.96% ip [kernel.kallsyms] [k] _raw_read_lock 3.82% ip [kernel.kallsyms] [k] refcount_inc_not_zero 3.33% ip [kernel.kallsyms] [k] _raw_spin_unlock_irqrestore 2.11% ip [kernel.kallsyms] [k] unmap_page_range 1.77% ip [kernel.kallsyms] [k] __wake_up 1.69% ip [kernel.kallsyms] [k] strlen 1.17% ip [kernel.kallsyms] [k] __wake_up_common 1.09% ip [kernel.kallsyms] [k] insert_header 1.04% ip [kernel.kallsyms] [k] page_remove_rmap 1.01% ip [kernel.kallsyms] [k] consume_skb 0.98% ip [kernel.kallsyms] [k] netlink_trim 0.51% ip [kernel.kallsyms] [k] kernfs_link_sibling 0.51% ip [kernel.kallsyms] [k] filemap_map_pages 0.46% ip [kernel.kallsyms] [k] memcpy_erms Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-19net_sched: no need to free qdisc in RCU callbackCong Wang
gen estimator has been rewritten in commit 1c0d32fde5bd ("net_sched: gen_estimator: complete rewrite of rate estimators"), the caller no longer needs to wait for a grace period. So this patch gets rid of it. Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: Eric Dumazet <edumazet@google.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-19net: dsa: move master ethtool codeVivien Didelot
DSA overrides the master device ethtool ops, so that it can inject stats from its dedicated switch CPU port as well. The related code is currently split in dsa.c and slave.c, but it only scopes the master net device. Move it to a new master.c DSA core file. This file will be later extented with master net device specific code. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-19net: dsa: setup master ethtool after dsa_ptrVivien Didelot
DSA overrides the master's ethtool ops so that we can inject its CPU port's statistics. Because of that, we need to setup the ethtool ops after the master's dsa_ptr pointer has been assigned, not before. This patch setups the ethtool ops after dsa_ptr is assigned, and restores them before it gets cleared. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-19net: dsa: setup master ethtool unconditionallyVivien Didelot
When a DSA switch tree is meant to be applied, it already has a CPU port. Thus remove the condition of dst->cpu_dp. Moreover, the next lines access dst->cpu_dp unconditionally. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-19net: dsa: remove copy of master ethtool_opsVivien Didelot
There is no need to store a copy of the master ethtool ops, storing the original pointer in DSA and the new one in the master netdev itself is enough. In the meantime, set orig_ethtool_ops to NULL when restoring the master ethtool ops and check the presence of the master original ethtool ops as well as its needed functions before calling them. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-19net: sk_buff rbnode reorgEric Dumazet
skb->rbnode shares space with skb->next, skb->prev and skb->tstamp Current uses (TCP receive ofo queue and netem) need to save/restore tstamp, while skb->dev is either NULL (TCP) or a constant for a given queue (netem). Since we plan using an RB tree for TCP retransmit queue to speedup SACK processing with large BDP, this patch exchanges skb->dev and skb->tstamp. This saves some overhead in both TCP and netem. v2: removes the swtstamp field from struct tcp_skb_cb Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Soheil Hassas Yeganeh <soheil@google.com> Cc: Wei Wang <weiwan@google.com> Cc: Willem de Bruijn <willemb@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-19vsock: vmci: Remove unneeded linux/miscdevice.h includeCorentin Labbe
net/vmw_vsock/vmci_transport.c does not use any miscdevice so this patch remove this unnecessary inclusion. Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-18net_sched: sch_htb: add per class overlimits counterEric Dumazet
HTB qdisc overlimits counter is properly increased, but we have no per class counter, meaning it is difficult to diagnose HTB problems. This patch adds this counter, visible in "tc -s class show dev eth0", with current iproute2. Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Denys Fedoryshchenko <nuclearcat@nuclearcat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-18net_sched: use explicit size of struct tcmsg, remove need to declare tcmColin Ian King
Pointer tcm is being initialized and is never read, it is only being used to determine the size of struct tcmsg. Clean this up by removing variable tcm and explicitly using the sizeof struct tcmsg rather than *tcm. Cleans up clang warning: warning: Value stored to 'tcm' during its initialization is never read Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-18net: Convert int functions to boolJoe Perches
Global function ipv6_rcv_saddr_equal and static functions ipv6_rcv_saddr_equal and ipv4_rcv_saddr_equal currently return int. bool is slightly more descriptive for these functions so change their return type from int to bool. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-18net: tcp_input: Neaten DBGUNDOJoe Perches
Move the #ifdef into the static void function so that the use of DBGUNDO is validated when FASTRETRANS_DEBUG <= 1. Remove the now unnecessary #else and #define DBGUNDO. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-16Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking fixes from David Miller: 1) Fix hotplug deadlock in hv_netvsc, from Stephen Hemminger. 2) Fix double-free in rmnet driver, from Dan Carpenter. 3) INET connection socket layer can double put request sockets, fix from Eric Dumazet. 4) Don't match collect metadata-mode tunnels if the device is down, from Haishuang Yan. 5) Do not perform TSO6/GSO on ipv6 packets with extensions headers in be2net driver, from Suresh Reddy. 6) Fix scaling error in gen_estimator, from Eric Dumazet. 7) Fix 64-bit statistics deadlock in systemport driver, from Florian Fainelli. 8) Fix use-after-free in sctp_sock_dump, from Xin Long. 9) Reject invalid BPF_END instructions in verifier, from Edward Cree. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (43 commits) mlxsw: spectrum_router: Only handle IPv4 and IPv6 events Documentation: link in networking docs tcp: fix data delivery rate bpf/verifier: reject BPF_ALU64|BPF_END sctp: do not mark sk dumped when inet_sctp_diag_fill returns err sctp: fix an use-after-free issue in sctp_sock_dump netvsc: increase default receive buffer size tcp: update skb->skb_mstamp more carefully net: ipv4: fix l3slave check for index returned in IP_PKTINFO net: smsc911x: Quieten netif during suspend net: systemport: Fix 64-bit stats deadlock net: vrf: avoid gcc-4.6 warning qed: remove unnecessary call to memset tg3: clean up redundant initialization of tnapi tls: make tls_sw_free_resources static sctp: potential read out of bounds in sctp_ulpevent_type_enabled() MAINTAINERS: review Renesas DT bindings as well net_sched: gen_estimator: fix scaling error in bytes/packets samples nfp: wait for the NSP resource to appear on boot nfp: wait for board state before talking to the NSP ...
2017-09-16tcp: fix data delivery rateEric Dumazet
Now skb->mstamp_skb is updated later, we also need to call tcp_rate_skb_sent() after the update is done. Fixes: 8c72c65b426b ("tcp: update skb->skb_mstamp more carefully") Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-15sctp: do not mark sk dumped when inet_sctp_diag_fill returns errXin Long
sctp_diag would not actually dump out sk/asoc if inet_sctp_diag_fill returns err, in which case it shouldn't mark sk dumped by setting cb->args[3] as 1 in sctp_sock_dump(). Otherwise, it could cause some asocs to have no parent's sk dumped in 'ss --sctp'. So this patch is to not set cb->args[3] when inet_sctp_diag_fill() returns err in sctp_sock_dump(). Fixes: 8f840e47f190 ("sctp: add the sctp_diag.c file") Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-15sctp: fix an use-after-free issue in sctp_sock_dumpXin Long
Commit 86fdb3448cc1 ("sctp: ensure ep is not destroyed before doing the dump") tried to fix an use-after-free issue by checking !sctp_sk(sk)->ep with holding sock and sock lock. But Paolo noticed that endpoint could be destroyed in sctp_rcv without sock lock protection. It means the use-after-free issue still could be triggered when sctp_rcv put and destroy ep after sctp_sock_dump checks !ep, although it's pretty hard to reproduce. I could reproduce it by mdelay in sctp_rcv while msleep in sctp_close and sctp_sock_dump long time. This patch is to add another param cb_done to sctp_for_each_transport and dump ep->assocs with holding tsp after jumping out of transport's traversal in it to avoid this issue. It can also improve sctp diag dump to make it run faster, as no need to save sk into cb->args[5] and keep calling sctp_for_each_transport any more. This patch is also to use int * instead of int for the pos argument in sctp_for_each_transport, which could make postion increment only in sctp_for_each_transport and no need to keep changing cb->args[2] in sctp_sock_filter and sctp_sock_dump any more. Fixes: 86fdb3448cc1 ("sctp: ensure ep is not destroyed before doing the dump") Reported-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-15tcp: update skb->skb_mstamp more carefullyEric Dumazet
liujian reported a problem in TCP_USER_TIMEOUT processing with a patch in tcp_probe_timer() : https://www.spinics.net/lists/netdev/msg454496.html After investigations, the root cause of the problem is that we update skb->skb_mstamp of skbs in write queue, even if the attempt to send a clone or copy of it failed. One reason being a routing problem. This patch prevents this, solving liujian issue. It also removes a potential RTT miscalculation, since __tcp_retransmit_skb() is not OR-ing TCP_SKB_CB(skb)->sacked with TCPCB_EVER_RETRANS if a failure happens, but skb->skb_mstamp has been changed. A future ACK would then lead to a very small RTT sample and min_rtt would then be lowered to this too small value. Tested: # cat user_timeout.pkt --local_ip=192.168.102.64 0 socket(..., SOCK_STREAM, IPPROTO_TCP) = 3 +0 setsockopt(3, SOL_SOCKET, SO_REUSEADDR, [1], 4) = 0 +0 bind(3, ..., ...) = 0 +0 listen(3, 1) = 0 +0 `ifconfig tun0 192.168.102.64/16; ip ro add 192.0.2.1 dev tun0` +0 < S 0:0(0) win 0 <mss 1460> +0 > S. 0:0(0) ack 1 <mss 1460> +.1 < . 1:1(0) ack 1 win 65530 +0 accept(3, ..., ...) = 4 +0 setsockopt(4, SOL_TCP, TCP_USER_TIMEOUT, [3000], 4) = 0 +0 write(4, ..., 24) = 24 +0 > P. 1:25(24) ack 1 win 29200 +.1 < . 1:1(0) ack 25 win 65530 //change the ipaddress +1 `ifconfig tun0 192.168.0.10/16` +1 write(4, ..., 24) = 24 +1 write(4, ..., 24) = 24 +1 write(4, ..., 24) = 24 +1 write(4, ..., 24) = 24 +0 `ifconfig tun0 192.168.102.64/16` +0 < . 1:2(1) ack 25 win 65530 +0 `ifconfig tun0 192.168.0.10/16` +3 write(4, ..., 24) = -1 # ./packetdrill user_timeout.pkt Signed-off-by: Eric Dumazet <edumazet@googl.com> Reported-by: liujian <liujian56@huawei.com> Acked-by: Neal Cardwell <ncardwell@google.com> Acked-by: Yuchung Cheng <ycheng@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-15net: ipv4: fix l3slave check for index returned in IP_PKTINFODavid Ahern
rt_iif is only set to the actual egress device for the output path. The recent change to consider the l3slave flag when returning IP_PKTINFO works for local traffic (the correct device index is returned), but it broke the more typical use case of packets received from a remote host always returning the VRF index rather than the original ingress device. Update the fixup to consider l3slave and rt_iif actually getting set. Fixes: 1dfa76390bf05 ("net: ipv4: add check for l3slave for index returned in IP_PKTINFO") Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-14Merge branch 'work.set_fs' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull more set_fs removal from Al Viro: "Christoph's 'use kernel_read and friends rather than open-coding set_fs()' series" * 'work.set_fs' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: fs: unexport vfs_readv and vfs_writev fs: unexport vfs_read and vfs_write fs: unexport __vfs_read/__vfs_write lustre: switch to kernel_write gadget/f_mass_storage: stop messing with the address limit mconsole: switch to kernel_read btrfs: switch write_buf to kernel_write net/9p: switch p9_fd_read to kernel_write mm/nommu: switch do_mmap_private to kernel_read serial2002: switch serial2002_tty_write to kernel_{read/write} fs: make the buf argument to __kernel_write a void pointer fs: fix kernel_write prototype fs: fix kernel_read prototype fs: move kernel_read to fs/read_write.c fs: move kernel_write to fs/read_write.c autofs4: switch autofs4_write to __kernel_write ashmem: switch to ->read_iter
2017-09-14tls: make tls_sw_free_resources staticTobias Klauser
Make the needlessly global function tls_sw_free_resources static to fix a gcc/sparse warning. Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-13net_sched: gen_estimator: fix scaling error in bytes/packets samplesEric Dumazet
Denys reported wrong rate estimations with HTB classes. It appears the bug was added in linux-4.10, since my tests where using intervals of one second only. HTB using 4 sec default rate estimators, reported rates were 4x higher. We need to properly scale the bytes/packets samples before integrating them in EWMA. Tested: echo 1 >/sys/module/sch_htb/parameters/htb_rate_est Setup HTB with one class with a rate/cail of 5Gbit Generate traffic on this class tc -s -d cl sh dev eth0 classid 7002:11 class htb 7002:11 parent 7002:1 prio 5 quantum 200000 rate 5Gbit ceil 5Gbit linklayer ethernet burst 80000b/1 mpu 0b cburst 80000b/1 mpu 0b level 0 rate_handle 1 Sent 1488215421648 bytes 982969243 pkt (dropped 0, overlimits 0 requeues 0) rate 5Gbit 412814pps backlog 136260b 2p requeues 0 TCP pkts/rtx 982969327/45 bytes 1488215557414/68130 lended: 22732826 borrowed: 0 giants: 0 tokens: -1684 ctokens: -1684 Fixes: 1c0d32fde5bd ("net_sched: gen_estimator: complete rewrite of rate estimators") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Denys Fedoryshchenko <nuclearcat@nuclearcat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-13net: sched: fix use-after-free in tcf_action_destroy and tcf_del_walkerJiri Pirko
Recent commit d7fb60b9cafb ("net_sched: get rid of tcfa_rcu") removed freeing in call_rcu, which changed already existing hard-to-hit race condition into 100% hit: [ 598.599825] BUG: unable to handle kernel NULL pointer dereference at 0000000000000030 [ 598.607782] IP: tcf_action_destroy+0xc0/0x140 Or: [ 40.858924] BUG: unable to handle kernel NULL pointer dereference at 0000000000000030 [ 40.862840] IP: tcf_generic_walker+0x534/0x820 Fix this by storing the ops and use them directly for module_put call. Fixes: a85a970af265 ("net_sched: move tc_action into tcf_common") Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-12ip6_tunnel: fix ip6 tunnel lookup in collect_md modeHaishuang Yan
In collect_md mode, if the tun dev is down, it still can call __ip6_tnl_rcv to receive on packets, and the rx statistics increase improperly. When the md tunnel is down, it's not neccessary to increase RX drops for the tunnel device, packets would be recieved on fallback tunnel, and the RX drops on fallback device will be increased as expected. Fixes: 8d79266bc48c ("ip6_tunnel: add collect_md mode to IPv6 tunnels") Cc: Alexei Starovoitov <ast@fb.com> Signed-off-by: Haishuang Yan <yanhaishuang@cmss.chinamobile.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-12ip_tunnel: fix ip tunnel lookup in collect_md modeHaishuang Yan
In collect_md mode, if the tun dev is down, it still can call ip_tunnel_rcv to receive on packets, and the rx statistics increase improperly. When the md tunnel is down, it's not neccessary to increase RX drops for the tunnel device, packets would be recieved on fallback tunnel, and the RX drops on fallback device will be increased as expected. Fixes: 2e15ea390e6f ("ip_gre: Add support to collect tunnel metadata.") Cc: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: Haishuang Yan <yanhaishuang@cmss.chinamobile.com> Acked-by: Pravin B Shelar <pshelar@ovn.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-12net_sched: carefully handle tcf_block_put()Cong Wang
As pointed out by Jiri, there is still a race condition between tcf_block_put() and tcf_chain_destroy() in a RCU callback. There is no way to make it correct without proper locking or synchronization, because both operate on a shared list. Locking is hard, because the only lock we can pick here is a spinlock, however, in tc_dump_tfilter() we iterate this list with a sleeping function called (tcf_chain_dump()), which makes using a lock to protect chain_list almost impossible. Jiri suggested the idea of holding a refcnt before flushing, this works because it guarantees us there would be no parallel tcf_chain_destroy() during the loop, therefore the race condition is gone. But we have to be very careful with proper synchronization with RCU callbacks. Suggested-by: Jiri Pirko <jiri@mellanox.com> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-12net_sched: fix reference counting of tc filter chainCong Wang
This patch fixes the following ugliness of tc filter chain refcnt: a) tp proto should hold a refcnt to the chain too. This significantly simplifies the logic. b) Chain 0 is no longer special, it is created with refcnt=1 like any other chains. All the ugliness in tcf_chain_put() can be gone! c) No need to handle the flushing oddly, because block still holds chain 0, it can not be released, this guarantees block is the last user. d) The race condition with RCU callbacks is easier to handle with just a rcu_barrier(). Much easier to understand, nothing to hide. Thanks to the previous patch. Please see also the comments in code. e) Make the code understandable by humans, much less error-prone. Fixes: 744a4cf63e52 ("net: sched: fix use after free when tcf_chain_destroy is called multiple times") Fixes: 5bc1701881e3 ("net: sched: introduce multichain support for filters") Cc: Jiri Pirko <jiri@mellanox.com> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-12net_sched: get rid of tcfa_rcuCong Wang
gen estimator has been rewritten in commit 1c0d32fde5bd ("net_sched: gen_estimator: complete rewrite of rate estimators"), the caller is no longer needed to wait for a grace period. So this patch gets rid of it. This also completely closes a race condition between action free path and filter chain add/remove path for the following patch. Because otherwise the nested RCU callback can't be caught by rcu_barrier(). Please see also the comments in code. Cc: Jiri Pirko <jiri@mellanox.com> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: Eric Dumazet <edumazet@google.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-12tcp/dccp: remove reqsk_put() from inet_child_forget()Eric Dumazet
Back in linux-4.4, I inadvertently put a call to reqsk_put() in inet_child_forget(), forgetting it could be called from two different points. In the case it is called from inet_csk_reqsk_queue_add(), we want to keep the reference on the request socket, since it is released later by the caller (tcp_v{4|6}_rcv()) This bug never showed up because atomic_dec_and_test() was not signaling the underflow, and SLAB_DESTROY_BY RCU semantic for request sockets prevented the request to be put in quarantine. Recent conversion of socket refcount from atomic_t to refcount_t finally exposed the bug. So move the reqsk_put() to inet_csk_listen_stop() to fix this. Thanks to Shankara Pailoor for using syzkaller and providing a nice set of .config and C repro. WARNING: CPU: 2 PID: 4277 at lib/refcount.c:186 refcount_sub_and_test+0x167/0x1b0 lib/refcount.c:186 Kernel panic - not syncing: panic_on_warn set ... CPU: 2 PID: 4277 Comm: syz-executor0 Not tainted 4.13.0-rc7 #3 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014 Call Trace: <IRQ> __dump_stack lib/dump_stack.c:16 [inline] dump_stack+0xf7/0x1aa lib/dump_stack.c:52 panic+0x1ae/0x3a7 kernel/panic.c:180 __warn+0x1c4/0x1d9 kernel/panic.c:541 report_bug+0x211/0x2d0 lib/bug.c:183 fixup_bug+0x40/0x90 arch/x86/kernel/traps.c:190 do_trap_no_signal arch/x86/kernel/traps.c:224 [inline] do_trap+0x260/0x390 arch/x86/kernel/traps.c:273 do_error_trap+0x118/0x340 arch/x86/kernel/traps.c:310 do_invalid_op+0x1b/0x20 arch/x86/kernel/traps.c:323 invalid_op+0x18/0x20 arch/x86/entry/entry_64.S:846 RIP: 0010:refcount_sub_and_test+0x167/0x1b0 lib/refcount.c:186 RSP: 0018:ffff88006e006b60 EFLAGS: 00010286 RAX: 0000000000000026 RBX: 0000000000000000 RCX: 0000000000000000 RDX: 0000000000000026 RSI: 1ffff1000dc00d2c RDI: ffffed000dc00d60 RBP: ffff88006e006bf0 R08: 0000000000000001 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: 1ffff1000dc00d6d R13: 00000000ffffffff R14: 0000000000000001 R15: ffff88006ce9d340 refcount_dec_and_test+0x1a/0x20 lib/refcount.c:211 reqsk_put+0x71/0x2b0 include/net/request_sock.h:123 tcp_v4_rcv+0x259e/0x2e20 net/ipv4/tcp_ipv4.c:1729 ip_local_deliver_finish+0x2e2/0xba0 net/ipv4/ip_input.c:216 NF_HOOK include/linux/netfilter.h:248 [inline] ip_local_deliver+0x1ce/0x6d0 net/ipv4/ip_input.c:257 dst_input include/net/dst.h:477 [inline] ip_rcv_finish+0x8db/0x19c0 net/ipv4/ip_input.c:397 NF_HOOK include/linux/netfilter.h:248 [inline] ip_rcv+0xc3f/0x17d0 net/ipv4/ip_input.c:488 __netif_receive_skb_core+0x1fb7/0x31f0 net/core/dev.c:4298 __netif_receive_skb+0x2c/0x1b0 net/core/dev.c:4336 process_backlog+0x1c5/0x6d0 net/core/dev.c:5102 napi_poll net/core/dev.c:5499 [inline] net_rx_action+0x6d3/0x14a0 net/core/dev.c:5565 __do_softirq+0x2cb/0xb2d kernel/softirq.c:284 do_softirq_own_stack+0x1c/0x30 arch/x86/entry/entry_64.S:898 </IRQ> do_softirq.part.16+0x63/0x80 kernel/softirq.c:328 do_softirq kernel/softirq.c:176 [inline] __local_bh_enable_ip+0x84/0x90 kernel/softirq.c:181 local_bh_enable include/linux/bottom_half.h:31 [inline] rcu_read_unlock_bh include/linux/rcupdate.h:705 [inline] ip_finish_output2+0x8ad/0x1360 net/ipv4/ip_output.c:231 ip_finish_output+0x74e/0xb80 net/ipv4/ip_output.c:317 NF_HOOK_COND include/linux/netfilter.h:237 [inline] ip_output+0x1cc/0x850 net/ipv4/ip_output.c:405 dst_output include/net/dst.h:471 [inline] ip_local_out+0x95/0x160 net/ipv4/ip_output.c:124 ip_queue_xmit+0x8c6/0x1810 net/ipv4/ip_output.c:504 tcp_transmit_skb+0x1963/0x3320 net/ipv4/tcp_output.c:1123 tcp_send_ack.part.35+0x38c/0x620 net/ipv4/tcp_output.c:3575 tcp_send_ack+0x49/0x60 net/ipv4/tcp_output.c:3545 tcp_rcv_synsent_state_process net/ipv4/tcp_input.c:5795 [inline] tcp_rcv_state_process+0x4876/0x4b60 net/ipv4/tcp_input.c:5930 tcp_v4_do_rcv+0x58a/0x820 net/ipv4/tcp_ipv4.c:1483 sk_backlog_rcv include/net/sock.h:907 [inline] __release_sock+0x124/0x360 net/core/sock.c:2223 release_sock+0xa4/0x2a0 net/core/sock.c:2715 inet_wait_for_connect net/ipv4/af_inet.c:557 [inline] __inet_stream_connect+0x671/0xf00 net/ipv4/af_inet.c:643 inet_stream_connect+0x58/0xa0 net/ipv4/af_inet.c:682 SYSC_connect+0x204/0x470 net/socket.c:1628 SyS_connect+0x24/0x30 net/socket.c:1609 entry_SYSCALL_64_fastpath+0x18/0xad RIP: 0033:0x451e59 RSP: 002b:00007f474843fc08 EFLAGS: 00000216 ORIG_RAX: 000000000000002a RAX: ffffffffffffffda RBX: 0000000000718000 RCX: 0000000000451e59 RDX: 0000000000000010 RSI: 0000000020002000 RDI: 0000000000000007 RBP: 0000000000000046 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000216 R12: 0000000000000000 R13: 00007ffc040a0f8f R14: 00007f47484409c0 R15: 0000000000000000 Fixes: ebb516af60e1 ("tcp/dccp: fix race at listener dismantle phase") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Shankara Pailoor <sp3485@columbia.edu> Tested-by: Shankara Pailoor <sp3485@columbia.edu> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-12openvswitch: Fix an error handling path in 'ovs_nla_init_match_and_action()'Christophe JAILLET
All other error handling paths in this function go through the 'error' label. This one should do the same. Fixes: 9cc9a5cb176c ("datapath: Avoid using stack larger than 1024.") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Acked-by: Pravin B Shelar <pshelar@ovn.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-12Merge tag 'ceph-for-4.14-rc1' of git://github.com/ceph/ceph-clientLinus Torvalds
Pull ceph updates from Ilya Dryomov: "The highlights include: - a large series of fixes and improvements to the snapshot-handling code (Zheng Yan) - individual read/write OSD requests passed down to libceph are now limited to 16M in size to avoid hitting OSD-side limits (Zheng Yan) - encode MStatfs v2 message to allow for more accurate space usage reporting (Douglas Fuller) - switch to the new writeback error tracking infrastructure (Jeff Layton)" * tag 'ceph-for-4.14-rc1' of git://github.com/ceph/ceph-client: (35 commits) ceph: stop on-going cached readdir if mds revokes FILE_SHARED cap ceph: wait on writeback after writing snapshot data ceph: fix capsnap dirty pages accounting ceph: ignore wbc->range_{start,end} when write back snapshot data ceph: fix "range cyclic" mode writepages ceph: cleanup local variables in ceph_writepages_start() ceph: optimize pagevec iterating in ceph_writepages_start() ceph: make writepage_nounlock() invalidate page that beyonds EOF ceph: properly get capsnap's size in get_oldest_context() ceph: remove stale check in ceph_invalidatepage() ceph: queue cap snap only when snap realm's context changes ceph: handle race between vmtruncate and queuing cap snap ceph: fix message order check in handle_cap_export() ceph: fix NULL pointer dereference in ceph_flush_snaps() ceph: adjust 36 checks for NULL pointers ceph: delete an unnecessary return statement in update_dentry_lease() ceph: ENOMEM pr_err in __get_or_create_frag() is redundant ceph: check negative offsets in ceph_llseek() ceph: more accurate statfs ceph: properly set snap follows for cap reconnect ...
2017-09-11Merge tag 'nfs-for-4.14-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfsLinus Torvalds
Pull NFS client updates from Trond Myklebust: "Hightlights include: Stable bugfixes: - Fix mirror allocation in the writeback code to avoid a use after free - Fix the O_DSYNC writes to use the correct byte range - Fix 2 use after free issues in the I/O code Features: - Writeback fixes to split up the inode->i_lock in order to reduce contention - RPC client receive fixes to reduce the amount of time the xprt->transport_lock is held when receiving data from a socket into am XDR buffer. - Ditto fixes to reduce contention between call side users of the rdma rb_lock, and its use in rpcrdma_reply_handler. - Re-arrange rdma stats to reduce false cacheline sharing. - Various rdma cleanups and optimisations. - Refactor the NFSv4.1 exchange id code and clean up the code. - Const-ify all instances of struct rpc_xprt_ops Bugfixes: - Fix the NFSv2 'sec=' mount option. - NFSv4.1: don't use machine credentials for CLOSE when using 'sec=sys' - Fix the NFSv3 GRANT callback when the port changes on the server. - Fix livelock issues with COMMIT - NFSv4: Use correct inode in _nfs4_opendata_to_nfs4_state() when doing and NFSv4.1 open by filehandle" * tag 'nfs-for-4.14-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: (69 commits) NFS: Count the bytes of skipped subrequests in nfs_lock_and_join_requests() NFS: Don't hold the group lock when calling nfs_release_request() NFS: Remove pnfs_generic_transfer_commit_list() NFS: nfs_lock_and_join_requests and nfs_scan_commit_list can deadlock NFS: Fix 2 use after free issues in the I/O code NFS: Sync the correct byte range during synchronous writes lockd: Delete an error message for a failed memory allocation in reclaimer() NFS: remove jiffies field from access cache NFS: flush data when locking a file to ensure cache coherence for mmap. SUNRPC: remove some dead code. NFS: don't expect errors from mempool_alloc(). xprtrdma: Use xprt_pin_rqst in rpcrdma_reply_handler xprtrdma: Re-arrange struct rx_stats NFS: Fix NFSv2 security settings NFSv4.1: don't use machine credentials for CLOSE when using 'sec=sys' SUNRPC: ECONNREFUSED should cause a rebind. NFS: Remove unused parameter gfp_flags from nfs_pageio_init() NFSv4: Fix up mirror allocation SUNRPC: Add a separate spinlock to protect the RPC request receive list SUNRPC: Cleanup xs_tcp_read_common() ...
2017-09-11net/sched: fix pointer check in gen_handleJosh Hunt
Fixes sparse warning about pointer in gen_handle: net/sched/cls_rsvp.h:392:40: warning: Using plain integer as NULL pointer Fixes: 8113c095672f6 ("net_sched: use void pointer for filter handle") Signed-off-by: Josh Hunt <johunt@akamai.com> Acked-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-11ipv6: sr: remove duplicate routing header type checkDavid Lebrun
As seg6_validate_srh() already checks that the Routing Header type is correct, it is not necessary to do it again in get_srh(). Fixes: 5829d70b ("ipv6: sr: fix get_srh() to comply with IPv6 standard "RFC 8200") Signed-off-by: David Lebrun <dlebrun@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-11xdp: implement xdp_redirect_map for generic XDPJesper Dangaard Brouer
Using bpf_redirect_map is allowed for generic XDP programs, but the appropriate map lookup was never performed in xdp_do_generic_redirect(). Instead the map-index is directly used as the ifindex. For the xdp_redirect_map sample in SKB-mode '-S', this resulted in trying sending on ifindex 0 which isn't valid, resulting in getting SKB packets dropped. Thus, the reported performance numbers are wrong in commit 24251c264798 ("samples/bpf: add option for native and skb mode for redirect apps") for the 'xdp_redirect_map -S' case. Before commit 109980b894e9 ("bpf: don't select potentially stale ri->map from buggy xdp progs") it could crash the kernel. Like this commit also check that the map_owner owner is correct before dereferencing the map pointer. But make sure that this API misusage can be caught by a tracepoint. Thus, allowing userspace via tracepoints to detect misbehaving bpf_progs. Fixes: 6103aa96ec07 ("net: implement XDP_REDIRECT for xdp generic") Fixes: 24251c264798 ("samples/bpf: add option for native and skb mode for redirect apps") Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-09Bluetooth: Properly check L2CAP config option output buffer lengthBen Seri
Validate the output buffer length for L2CAP config requests and responses to avoid overflowing the stack buffer used for building the option blocks. Cc: stable@vger.kernel.org Signed-off-by: Ben Seri <ben@armis.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-09Merge tag 'nfsd-4.14' of git://linux-nfs.org/~bfields/linuxLinus Torvalds
Pull nfsd updates from Bruce Fields: "More RDMA work and some op-structure constification from Chuck Lever, and a small cleanup to our xdr encoding" * tag 'nfsd-4.14' of git://linux-nfs.org/~bfields/linux: svcrdma: Estimate Send Queue depth properly rdma core: Add rdma_rw_mr_payload() svcrdma: Limit RQ depth svcrdma: Populate tail iovec when receiving nfsd: Incoming xdr_bufs may have content in tail buffer svcrdma: Clean up svc_rdma_build_read_chunk() sunrpc: Const-ify struct sv_serv_ops nfsd: Const-ify NFSv4 encoding and decoding ops arrays sunrpc: Const-ify instances of struct svc_xprt_ops nfsd4: individual encoders no longer see error cases nfsd4: skip encoder in trivial error cases nfsd4: define ->op_release for compound ops nfsd4: opdesc will be useful outside nfs4proc.c nfsd4: move some nfsd4 op definitions to xdr4.h
2017-09-09Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking fixes from David Miller: "The iwlwifi firmware compat fix is in here as well as some other stuff: 1) Fix request socket leak introduced by BPF deadlock fix, from Eric Dumazet. 2) Fix VLAN handling with TXQs in mac80211, from Johannes Berg. 3) Missing __qdisc_drop conversions in prio and qfq schedulers, from Gao Feng. 4) Use after free in netlink nlk groups handling, from Xin Long. 5) Handle MTU update properly in ipv6 gre tunnels, from Xin Long. 6) Fix leak of ipv6 fib tables on netns teardown, from Sabrina Dubroca with follow-on fix from Eric Dumazet. 7) Need RCU and preemption disabled during generic XDP data patch, from John Fastabend" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (54 commits) bpf: make error reporting in bpf_warn_invalid_xdp_action more clear Revert "mdio_bus: Remove unneeded gpiod NULL check" bpf: devmap, use cond_resched instead of cpu_relax bpf: add support for sockmap detach programs net: rcu lock and preempt disable missing around generic xdp bpf: don't select potentially stale ri->map from buggy xdp progs net: tulip: Constify tulip_tbl net: ethernet: ti: netcp_core: no need in netif_napi_del davicom: Display proper debug level up to 6 net: phy: sfp: rename dt properties to match the binding dt-binding: net: sfp binding documentation dt-bindings: add SFF vendor prefix dt-bindings: net: don't confuse with generic PHY property ip6_tunnel: fix setting hop_limit value for ipv6 tunnel ip_tunnel: fix setting ttl and tos value in collect_md mode ipv6: fix typo in fib6_net_exit() tcp: fix a request socket leak sctp: fix missing wake ups in some situations netfilter: xt_hashlimit: fix build error caused by 64bit division netfilter: xt_hashlimit: alloc hashtable with right size ...
2017-09-08bpf: make error reporting in bpf_warn_invalid_xdp_action more clearDaniel Borkmann
Differ between illegal XDP action code and just driver unsupported one to provide better feedback when we throw a one-time warning here. Reason is that with 814abfabef3c ("xdp: add bpf_redirect helper function") not all drivers support the new XDP return code yet and thus they will fall into their 'default' case when checking for return codes after program return, which then triggers a bpf_warn_invalid_xdp_action() stating that the return code is illegal, but from XDP perspective it's not. I decided not to place something like a XDP_ACT_MAX define into uapi i) given we don't have this either for all other program types, ii) future action codes could have further encoding there, which would render such define unsuitable and we wouldn't be able to rip it out again, and iii) we rarely add new action codes. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-08net: rcu lock and preempt disable missing around generic xdpJohn Fastabend
do_xdp_generic must be called inside rcu critical section with preempt disabled to ensure BPF programs are valid and per-cpu variables used for redirect operations are consistent. This patch ensures this is true and fixes the splat below. The netif_receive_skb_internal() code path is now broken into two rcu critical sections. I decided it was better to limit the preempt_enable/disable block to just the xdp static key portion and the fallout is more rcu_read_lock/unlock calls. Seems like the best option to me. [ 607.596901] ============================= [ 607.596906] WARNING: suspicious RCU usage [ 607.596912] 4.13.0-rc4+ #570 Not tainted [ 607.596917] ----------------------------- [ 607.596923] net/core/dev.c:3948 suspicious rcu_dereference_check() usage! [ 607.596927] [ 607.596927] other info that might help us debug this: [ 607.596927] [ 607.596933] [ 607.596933] rcu_scheduler_active = 2, debug_locks = 1 [ 607.596938] 2 locks held by pool/14624: [ 607.596943] #0: (rcu_read_lock_bh){......}, at: [<ffffffff95445ffd>] ip_finish_output2+0x14d/0x890 [ 607.596973] #1: (rcu_read_lock_bh){......}, at: [<ffffffff953c8e3a>] __dev_queue_xmit+0x14a/0xfd0 [ 607.597000] [ 607.597000] stack backtrace: [ 607.597006] CPU: 5 PID: 14624 Comm: pool Not tainted 4.13.0-rc4+ #570 [ 607.597011] Hardware name: Dell Inc. Precision Tower 5810/0HHV7N, BIOS A17 03/01/2017 [ 607.597016] Call Trace: [ 607.597027] dump_stack+0x67/0x92 [ 607.597040] lockdep_rcu_suspicious+0xdd/0x110 [ 607.597054] do_xdp_generic+0x313/0xa50 [ 607.597068] ? time_hardirqs_on+0x5b/0x150 [ 607.597076] ? mark_held_locks+0x6b/0xc0 [ 607.597088] ? netdev_pick_tx+0x150/0x150 [ 607.597117] netif_rx_internal+0x205/0x3f0 [ 607.597127] ? do_xdp_generic+0xa50/0xa50 [ 607.597144] ? lock_downgrade+0x2b0/0x2b0 [ 607.597158] ? __lock_is_held+0x93/0x100 [ 607.597187] netif_rx+0x119/0x190 [ 607.597202] loopback_xmit+0xfd/0x1b0 [ 607.597214] dev_hard_start_xmit+0x127/0x4e0 Fixes: d445516966dc ("net: xdp: support xdp generic on virtual devices") Fixes: b5cdae3291f7 ("net: Generic XDP") Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-08bpf: don't select potentially stale ri->map from buggy xdp progsDaniel Borkmann
We can potentially run into a couple of issues with the XDP bpf_redirect_map() helper. The ri->map in the per CPU storage can become stale in several ways, mostly due to misuse, where we can then trigger a use after free on the map: i) prog A is calling bpf_redirect_map(), returning XDP_REDIRECT and running on a driver not supporting XDP_REDIRECT yet. The ri->map on that CPU becomes stale when the XDP program is unloaded on the driver, and a prog B loaded on a different driver which supports XDP_REDIRECT return code. prog B would have to omit calling to bpf_redirect_map() and just return XDP_REDIRECT, which would then access the freed map in xdp_do_redirect() since not cleared for that CPU. ii) prog A is calling bpf_redirect_map(), returning a code other than XDP_REDIRECT. prog A is then detached, which triggers release of the map. prog B is attached which, similarly as in i), would just return XDP_REDIRECT without having called bpf_redirect_map() and thus be accessing the freed map in xdp_do_redirect() since not cleared for that CPU. iii) prog A is attached to generic XDP, calling the bpf_redirect_map() helper and returning XDP_REDIRECT. xdp_do_generic_redirect() is currently not handling ri->map (will be fixed by Jesper), so it's not being reset. Later loading a e.g. native prog B which would, say, call bpf_xdp_redirect() and then returns XDP_REDIRECT would find in xdp_do_redirect() that a map was set and uses that causing use after free on map access. Fix thus needs to avoid accessing stale ri->map pointers, naive way would be to call a BPF function from drivers that just resets it to NULL for all XDP return codes but XDP_REDIRECT and including XDP_REDIRECT for drivers not supporting it yet (and let ri->map being handled in xdp_do_generic_redirect()). There is a less intrusive way w/o letting drivers call a reset for each BPF run. The verifier knows we're calling into bpf_xdp_redirect_map() helper, so it can do a small insn rewrite transparent to the prog itself in the sense that it fills R4 with a pointer to the own bpf_prog. We have that pointer at verification time anyway and R4 is allowed to be used as per calling convention we scratch R0 to R5 anyway, so they become inaccessible and program cannot read them prior to a write. Then, the helper would store the prog pointer in the current CPUs struct redirect_info. Later in xdp_do_*_redirect() we check whether the redirect_info's prog pointer is the same as passed xdp_prog pointer, and if that's the case then all good, since the prog holds a ref on the map anyway, so it is always valid at that point in time and must have a reference count of at least 1. If in the unlikely case they are not equal, it means we got a stale pointer, so we clear and bail out right there. Also do reset map and the owning prog in bpf_xdp_redirect(), so that bpf_xdp_redirect_map() and bpf_xdp_redirect() won't get mixed up, only the last call should take precedence. A tc bpf_redirect() doesn't use map anywhere yet, so no need to clear it there since never accessed in that layer. Note that in case the prog is released, and thus the map as well we're still under RCU read critical section at that time and have preemption disabled as well. Once we commit with the __dev_map_insert_ctx() from xdp_do_redirect_map() and set the map to ri->map_to_flush, we still wait for a xdp_do_flush_map() to finish in devmap dismantle time once flush_needed bit is set, so that is fine. Fixes: 97f91a7cf04f ("bpf: add bpf_redirect_map helper routine") Reported-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-08ip6_tunnel: fix setting hop_limit value for ipv6 tunnelHaishuang Yan
Similar to vxlan/geneve tunnel, if hop_limit is zero, it should fall back to ip6_dst_hoplimt(). Signed-off-by: Haishuang Yan <yanhaishuang@cmss.chinamobile.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-08ip_tunnel: fix setting ttl and tos value in collect_md modeHaishuang Yan
ttl and tos variables are declared and assigned, but are not used in iptunnel_xmit() function. Fixes: cfc7381b3002 ("ip_tunnel: add collect_md mode to IPIP tunnel") Cc: Alexei Starovoitov <ast@fb.com> Signed-off-by: Haishuang Yan <yanhaishuang@cmss.chinamobile.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-26 20:50:32 +0000