| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/sschmidt/wpan
Stefan Schmidt says:
====================
ieee802154 for net 2021-08-12
Mostly fixes coming from bot reports. Dongliang Mu tackled some syzkaller
reports in hwsim again and Takeshi Misawa a memory leak in ieee802154 raw.
* tag 'ieee802154-for-davem-2021-08-12' of git://git.kernel.org/pub/scm/linux/kernel/git/sschmidt/wpan:
net: Fix memory leak in ieee802154_raw_deliver
ieee802154: hwsim: fix GPF in hwsim_new_edge_nl
ieee802154: hwsim: fix GPF in hwsim_set_edge_lqi
====================
Link: https://lore.kernel.org/r/20210812183912.1663996-1-stefan@datenfreihafen.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
There's a potential deadlock case when remove the vsock device or
process the RESET event:
vsock_for_each_connected_socket:
spin_lock_bh(&vsock_table_lock) ----------- (1)
...
virtio_vsock_reset_sock:
lock_sock(sk) --------------------- (2)
...
spin_unlock_bh(&vsock_table_lock)
lock_sock() may do initiative schedule when the 'sk' is owned by
other thread at the same time, we would receivce a warning message
that "scheduling while atomic".
Even worse, if the next task (selected by the scheduler) try to
release a 'sk', it need to request vsock_table_lock and the deadlock
occur, cause the system into softlockup state.
Call trace:
queued_spin_lock_slowpath
vsock_remove_bound
vsock_remove_sock
virtio_transport_release
__vsock_release
vsock_release
__sock_release
sock_close
__fput
____fput
So we should not require sk_lock in this case, just like the behavior
in vhost_vsock or vmci.
Fixes: 0ea9e1d3a9e3 ("VSOCK: Introduce virtio_transport.ko")
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Longpeng(Mike) <longpeng2@huawei.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://lore.kernel.org/r/20210812053056.1699-1-longpeng2@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This reverts commit 0efea3c649f0 because of:
- The returning -ENOBUF error is fine on socket buffer allocation.
- There is side effect in the calling path
tipc_node_xmit()->tipc_link_xmit() when checking error code returning.
Fixes: 0efea3c649f0 ("tipc: Return the correct errno code")
Acked-by: Jon Maloy <jmaloy@redhat.com>
Signed-off-by: Hoang Le <hoang.h.le@dektech.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Some arches support cmpxchg() on 4-byte and 8-byte only.
Increase mr_ifc_count width to 32bit to fix this problem.
Fixes: 4a2b285e7e10 ("net: igmp: fix data-race in igmp_ifc_timer_expire()")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20210811195715.3684218-1-eric.dumazet@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Currently if BBR congestion control is initialized after more than 2B
packets have been delivered, depending on the phase of the
tp->delivered counter the tracking of BBR round trips can get stuck.
The bug arises because if tp->delivered is between 2^31 and 2^32 at
the time the BBR congestion control module is initialized, then the
initialization of bbr->next_rtt_delivered to 0 will cause the logic to
believe that the end of the round trip is still billions of packets in
the future. More specifically, the following check will fail
repeatedly:
!before(rs->prior_delivered, bbr->next_rtt_delivered)
and thus the connection will take up to 2B packets delivered before
that check will pass and the connection will set:
bbr->round_start = 1;
This could cause many mechanisms in BBR to fail to trigger, for
example bbr_check_full_bw_reached() would likely never exit STARTUP.
This bug is 5 years old and has not been observed, and as a practical
matter this would likely rarely trigger, since it would require
transferring at least 2B packets, or likely more than 3 terabytes of
data, before switching congestion control algorithms to BBR.
This patch is a stable candidate for kernels as far back as v4.9,
when tcp_bbr.c was added.
Fixes: 0f8782ea1497 ("tcp_bbr: add BBR congestion control")
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Reviewed-by: Yuchung Cheng <ycheng@google.com>
Reviewed-by: Kevin Yang <yyd@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20210811024056.235161-1-ncardwell@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
After migrating my laptop from 4.19-LTS to 5.4-LTS a while ago I noticed
that my Ethernet port to which a bond and a VLAN interface are attached
appeared to remain up after resuming from suspend with the cable unplugged
(and that problem still persists with 5.10-LTS).
It happens that the following happens:
- the network driver (e1000e here) prepares to suspend, calls e1000e_down()
which calls netif_carrier_off() to signal that the link is going down.
- netif_carrier_off() adds a link_watch event to the list of events for
this device
- the device is completely stopped.
- the machine suspends
- the cable is unplugged and the machine brought to another location
- the machine is resumed
- the queued linkwatch events are processed for the device
- the device doesn't yet have the __LINK_STATE_PRESENT bit and its events
are silently dropped
- the device is resumed with its link down
- the upper VLAN and bond interfaces are never notified that the link had
been turned down and remain up
- the only way to provoke a change is to physically connect the machine
to a port and possibly unplug it.
The state after resume looks like this:
$ ip -br li | egrep 'bond|eth'
bond0 UP e8:6a:64:64:64:64 <BROADCAST,MULTICAST,MASTER,UP,LOWER_UP>
eth0 DOWN e8:6a:64:64:64:64 <NO-CARRIER,BROADCAST,MULTICAST,SLAVE,UP>
eth0.2@eth0 UP e8:6a:64:64:64:64 <BROADCAST,MULTICAST,SLAVE,UP,LOWER_UP>
Placing an explicit call to netdev_state_change() either in the suspend
or the resume code in the NIC driver worked around this but the solution
is not satisfying.
The issue in fact really is in link_watch that loses events while it
ought not to. It happens that the test for the device being present was
added by commit 124eee3f6955 ("net: linkwatch: add check for netdevice
being present to linkwatch_do_dev") in 4.20 to avoid an access to
devices that are not present.
Instead of dropping events, this patch proceeds slightly differently by
postponing their handling so that they happen after the device is fully
resumed.
Fixes: 124eee3f6955 ("net: linkwatch: add check for netdevice being present to linkwatch_do_dev")
Link: https://lists.openwall.net/netdev/2018/03/15/62
Cc: Heiner Kallweit <hkallweit1@gmail.com>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Link: https://lore.kernel.org/r/20210809160628.22623-1-w@1wt.eu
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
I got a memleak report:
BUG: memory leak
unreferenced object 0x607ee521a658 (size 240):
comm "syz-executor.0", pid 955, jiffies 4294780569 (age 16.449s)
hex dump (first 32 bytes, cpu 1):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<00000000d830ea5a>] br_multicast_add_port+0x1c2/0x300 net/bridge/br_multicast.c:1693
[<00000000274d9a71>] new_nbp net/bridge/br_if.c:435 [inline]
[<00000000274d9a71>] br_add_if+0x670/0x1740 net/bridge/br_if.c:611
[<0000000012ce888e>] do_set_master net/core/rtnetlink.c:2513 [inline]
[<0000000012ce888e>] do_set_master+0x1aa/0x210 net/core/rtnetlink.c:2487
[<0000000099d1cafc>] __rtnl_newlink+0x1095/0x13e0 net/core/rtnetlink.c:3457
[<00000000a01facc0>] rtnl_newlink+0x64/0xa0 net/core/rtnetlink.c:3488
[<00000000acc9186c>] rtnetlink_rcv_msg+0x369/0xa10 net/core/rtnetlink.c:5550
[<00000000d4aabb9c>] netlink_rcv_skb+0x134/0x3d0 net/netlink/af_netlink.c:2504
[<00000000bc2e12a3>] netlink_unicast_kernel net/netlink/af_netlink.c:1314 [inline]
[<00000000bc2e12a3>] netlink_unicast+0x4a0/0x6a0 net/netlink/af_netlink.c:1340
[<00000000e4dc2d0e>] netlink_sendmsg+0x789/0xc70 net/netlink/af_netlink.c:1929
[<000000000d22c8b3>] sock_sendmsg_nosec net/socket.c:654 [inline]
[<000000000d22c8b3>] sock_sendmsg+0x139/0x170 net/socket.c:674
[<00000000e281417a>] ____sys_sendmsg+0x658/0x7d0 net/socket.c:2350
[<00000000237aa2ab>] ___sys_sendmsg+0xf8/0x170 net/socket.c:2404
[<000000004f2dc381>] __sys_sendmsg+0xd3/0x190 net/socket.c:2433
[<0000000005feca6c>] do_syscall_64+0x37/0x90 arch/x86/entry/common.c:47
[<000000007304477d>] entry_SYSCALL_64_after_hwframe+0x44/0xae
On error path of br_add_if(), p->mcast_stats allocated in
new_nbp() need be freed, or it will be leaked.
Fixes: 1080ab95e3c7 ("net: bridge: add support for IGMP/MLD stats and export them via netlink")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Acked-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Link: https://lore.kernel.org/r/20210809132023.978546-1-yangyingliang@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
by drivers towards the bridge
The blamed commit added a new field to struct switchdev_notifier_fdb_info,
but did not make sure that all call paths set it to something valid.
For example, a switchdev driver may emit a SWITCHDEV_FDB_ADD_TO_BRIDGE
notifier, and since the 'is_local' flag is not set, it contains junk
from the stack, so the bridge might interpret those notifications as
being for local FDB entries when that was not intended.
To avoid that now and in the future, zero-initialize all
switchdev_notifier_fdb_info structures created by drivers such that all
newly added fields to not need to touch drivers again.
Fixes: 2c4eca3ef716 ("net: bridge: switchdev: include local flag in FDB notifications")
Reported-by: Ido Schimmel <idosch@idosch.org>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Tested-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Karsten Graul <kgraul@linux.ibm.com>
Link: https://lore.kernel.org/r/20210810115024.1629983-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Ignore fdb flags when adding port extern learn entries and always set
BR_FDB_LOCAL flag when adding bridge extern learn entries. This is
closest to the behaviour we had before and avoids breaking any use cases
which were allowed.
This patch fixes iproute2 calls which assume NUD_PERMANENT and were
allowed before, example:
$ bridge fdb add 00:11:22:33:44:55 dev swp1 extern_learn
Extern learn entries are allowed to roam, but do not expire, so static
or dynamic flags make no sense for them.
Also add a comment for future reference.
Fixes: eb100e0e24a2 ("net: bridge: allow to add externally learned entries from user-space")
Fixes: 0541a6293298 ("net: bridge: validate the NUD_PERMANENT bit when adding an extern_learn FDB entry")
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Tested-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20210810110010.43859-1-razor@blackwall.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Daniel Borkmann says:
====================
bpf 2021-08-10
We've added 5 non-merge commits during the last 2 day(s) which contain
a total of 7 files changed, 27 insertions(+), 15 deletions(-).
1) Fix missing bpf_read_lock_trace() context for BPF loader progs, from Yonghong Song.
2) Fix corner case where BPF prog retrieves wrong local storage, also from Yonghong Song.
3) Restrict availability of BPF write_user helper behind lockdown, from Daniel Borkmann.
4) Fix multiple kernel-doc warnings in BPF core, from Randy Dunlap.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
bpf, core: Fix kernel-doc notation
bpf: Fix potentially incorrect results with bpf_get_local_storage()
bpf: Add missing bpf_read_[un]lock_trace() for syscall program
bpf: Add lockdown check for probe_write_user helper
bpf: Add _kernel suffix to internal lockdown_bpf_read
====================
Link: https://lore.kernel.org/r/20210810144025.22814-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Fix the data-race reported by syzbot [1]
Issue here is that igmp_ifc_timer_expire() can update in_dev->mr_ifc_count
while another change just occured from another context.
in_dev->mr_ifc_count is only 8bit wide, so the race had little
consequences.
[1]
BUG: KCSAN: data-race in igmp_ifc_event / igmp_ifc_timer_expire
write to 0xffff8881051e3062 of 1 bytes by task 12547 on cpu 0:
igmp_ifc_event+0x1d5/0x290 net/ipv4/igmp.c:821
igmp_group_added+0x462/0x490 net/ipv4/igmp.c:1356
____ip_mc_inc_group+0x3ff/0x500 net/ipv4/igmp.c:1461
__ip_mc_join_group+0x24d/0x2c0 net/ipv4/igmp.c:2199
ip_mc_join_group_ssm+0x20/0x30 net/ipv4/igmp.c:2218
do_ip_setsockopt net/ipv4/ip_sockglue.c:1285 [inline]
ip_setsockopt+0x1827/0x2a80 net/ipv4/ip_sockglue.c:1423
tcp_setsockopt+0x8c/0xa0 net/ipv4/tcp.c:3657
sock_common_setsockopt+0x5d/0x70 net/core/sock.c:3362
__sys_setsockopt+0x18f/0x200 net/socket.c:2159
__do_sys_setsockopt net/socket.c:2170 [inline]
__se_sys_setsockopt net/socket.c:2167 [inline]
__x64_sys_setsockopt+0x62/0x70 net/socket.c:2167
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x3d/0x90 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x44/0xae
read to 0xffff8881051e3062 of 1 bytes by interrupt on cpu 1:
igmp_ifc_timer_expire+0x706/0xa30 net/ipv4/igmp.c:808
call_timer_fn+0x2e/0x1d0 kernel/time/timer.c:1419
expire_timers+0x135/0x250 kernel/time/timer.c:1464
__run_timers+0x358/0x420 kernel/time/timer.c:1732
run_timer_softirq+0x19/0x30 kernel/time/timer.c:1745
__do_softirq+0x12c/0x26e kernel/softirq.c:558
invoke_softirq kernel/softirq.c:432 [inline]
__irq_exit_rcu+0x9a/0xb0 kernel/softirq.c:636
sysvec_apic_timer_interrupt+0x69/0x80 arch/x86/kernel/apic/apic.c:1100
asm_sysvec_apic_timer_interrupt+0x12/0x20 arch/x86/include/asm/idtentry.h:638
console_unlock+0x8e8/0xb30 kernel/printk/printk.c:2646
vprintk_emit+0x125/0x3d0 kernel/printk/printk.c:2174
vprintk_default+0x22/0x30 kernel/printk/printk.c:2185
vprintk+0x15a/0x170 kernel/printk/printk_safe.c:392
printk+0x62/0x87 kernel/printk/printk.c:2216
selinux_netlink_send+0x399/0x400 security/selinux/hooks.c:6041
security_netlink_send+0x42/0x90 security/security.c:2070
netlink_sendmsg+0x59e/0x7c0 net/netlink/af_netlink.c:1919
sock_sendmsg_nosec net/socket.c:703 [inline]
sock_sendmsg net/socket.c:723 [inline]
____sys_sendmsg+0x360/0x4d0 net/socket.c:2392
___sys_sendmsg net/socket.c:2446 [inline]
__sys_sendmsg+0x1ed/0x270 net/socket.c:2475
__do_sys_sendmsg net/socket.c:2484 [inline]
__se_sys_sendmsg net/socket.c:2482 [inline]
__x64_sys_sendmsg+0x42/0x50 net/socket.c:2482
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x3d/0x90 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x44/0xae
value changed: 0x01 -> 0x02
Reported by Kernel Concurrency Sanitizer on:
CPU: 1 PID: 12539 Comm: syz-executor.1 Not tainted 5.14.0-rc4-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
If IEEE-802.15.4-RAW is closed before receive skb, skb is leaked.
Fix this, by freeing sk_receive_queue in sk->sk_destruct().
syzbot report:
BUG: memory leak
unreferenced object 0xffff88810f644600 (size 232):
comm "softirq", pid 0, jiffies 4294967032 (age 81.270s)
hex dump (first 32 bytes):
10 7d 4b 12 81 88 ff ff 10 7d 4b 12 81 88 ff ff .}K......}K.....
00 00 00 00 00 00 00 00 40 7c 4b 12 81 88 ff ff ........@|K.....
backtrace:
[<ffffffff83651d4a>] skb_clone+0xaa/0x2b0 net/core/skbuff.c:1496
[<ffffffff83fe1b80>] ieee802154_raw_deliver net/ieee802154/socket.c:369 [inline]
[<ffffffff83fe1b80>] ieee802154_rcv+0x100/0x340 net/ieee802154/socket.c:1070
[<ffffffff8367cc7a>] __netif_receive_skb_one_core+0x6a/0xa0 net/core/dev.c:5384
[<ffffffff8367cd07>] __netif_receive_skb+0x27/0xa0 net/core/dev.c:5498
[<ffffffff8367cdd9>] netif_receive_skb_internal net/core/dev.c:5603 [inline]
[<ffffffff8367cdd9>] netif_receive_skb+0x59/0x260 net/core/dev.c:5662
[<ffffffff83fe6302>] ieee802154_deliver_skb net/mac802154/rx.c:29 [inline]
[<ffffffff83fe6302>] ieee802154_subif_frame net/mac802154/rx.c:102 [inline]
[<ffffffff83fe6302>] __ieee802154_rx_handle_packet net/mac802154/rx.c:212 [inline]
[<ffffffff83fe6302>] ieee802154_rx+0x612/0x620 net/mac802154/rx.c:284
[<ffffffff83fe59a6>] ieee802154_tasklet_handler+0x86/0xa0 net/mac802154/main.c:35
[<ffffffff81232aab>] tasklet_action_common.constprop.0+0x5b/0x100 kernel/softirq.c:557
[<ffffffff846000bf>] __do_softirq+0xbf/0x2ab kernel/softirq.c:345
[<ffffffff81232f4c>] do_softirq kernel/softirq.c:248 [inline]
[<ffffffff81232f4c>] do_softirq+0x5c/0x80 kernel/softirq.c:235
[<ffffffff81232fc1>] __local_bh_enable_ip+0x51/0x60 kernel/softirq.c:198
[<ffffffff8367a9a4>] local_bh_enable include/linux/bottom_half.h:32 [inline]
[<ffffffff8367a9a4>] rcu_read_unlock_bh include/linux/rcupdate.h:745 [inline]
[<ffffffff8367a9a4>] __dev_queue_xmit+0x7f4/0xf60 net/core/dev.c:4221
[<ffffffff83fe2db4>] raw_sendmsg+0x1f4/0x2b0 net/ieee802154/socket.c:295
[<ffffffff8363af16>] sock_sendmsg_nosec net/socket.c:654 [inline]
[<ffffffff8363af16>] sock_sendmsg+0x56/0x80 net/socket.c:674
[<ffffffff8363deec>] __sys_sendto+0x15c/0x200 net/socket.c:1977
[<ffffffff8363dfb6>] __do_sys_sendto net/socket.c:1989 [inline]
[<ffffffff8363dfb6>] __se_sys_sendto net/socket.c:1985 [inline]
[<ffffffff8363dfb6>] __x64_sys_sendto+0x26/0x30 net/socket.c:1985
Fixes: 9ec767160357 ("net: add IEEE 802.15.4 socket family implementation")
Reported-and-tested-by: syzbot+1f68113fa907bf0695a8@syzkaller.appspotmail.com
Signed-off-by: Takeshi Misawa <jeliantsurux@gmail.com>
Acked-by: Alexander Aring <aahringo@redhat.com>
Link: https://lore.kernel.org/r/20210805075414.GA15796@DESKTOP
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
|
|
Commit 79a7f8bdb159d ("bpf: Introduce bpf_sys_bpf() helper and program type.")
added support for syscall program, which is a sleepable program.
But the program run missed bpf_read_lock_trace()/bpf_read_unlock_trace(),
which is needed to ensure proper rcu callback invocations. This patch adds
bpf_read_[un]lock_trace() properly.
Fixes: 79a7f8bdb159d ("bpf: Introduce bpf_sys_bpf() helper and program type.")
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210809235151.1663680-1-yhs@fb.com
|
|
Repair kernel-doc notation in a few places to make it conform to
the expected format.
Fixes the following kernel-doc warnings:
flow.c:296: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
* Parse vlan tag from vlan header.
flow.c:296: warning: missing initial short description on line:
* Parse vlan tag from vlan header.
flow.c:537: warning: No description found for return value of 'key_extract_l3l4'
flow.c:769: warning: No description found for return value of 'key_extract'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Pravin B Shelar <pshelar@ovn.org>
Cc: dev@openvswitch.org
Link: https://lore.kernel.org/r/20210808190834.23362-1-rdunlap@infradead.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When mirror/redirect a skb to a different port, the ct info should be reset
for reclassification. Or the pkts will match unexpected rules. For example,
with following topology and commands:
-----------
|
veth0 -+-------
|
veth1 -+-------
|
------------
tc qdisc add dev veth0 clsact
# The same with "action mirred egress mirror dev veth1" or "action mirred ingress redirect dev veth1"
tc filter add dev veth0 egress chain 1 protocol ip flower ct_state +trk action mirred ingress mirror dev veth1
tc filter add dev veth0 egress chain 0 protocol ip flower ct_state -inv action ct commit action goto chain 1
tc qdisc add dev veth1 clsact
tc filter add dev veth1 ingress chain 0 protocol ip flower ct_state +trk action drop
ping <remove ip via veth0> &
tc -s filter show dev veth1 ingress
With command 'tc -s filter show', we can find the pkts were dropped on
veth1.
Fixes: b57dc7c13ea9 ("net/sched: Introduce action ct")
Signed-off-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
SMC clients may be assigned to a different link after the initial
connection between two peers was established. In such a case,
the connection counter was not correctly set.
Update the connection counter correctly when a smc client connection
is assigned to a different smc link.
Fixes: 07d51580ff65 ("net/smc: Add connection counters for links")
Signed-off-by: Guvenc Gulce <guvenc@linux.ibm.com>
Tested-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
There can be a race between the waiters for a tx work request buffer
and the link down processing that finally clears the link. Although
all waiters are woken up before the link is cleared there might be
waiters which did not yet get back control and are still waiting.
This results in an access to a cleared wait queue head.
Fix this by introducing atomic reference counting around the wait calls,
and wait with the link clear processing until all waiters have finished.
Move the work request layer related calls into smc_wr.c and set the
link state to INACTIVE before calling smcr_link_clear() in
smc_llc_srv_add_link().
Fixes: 15e1b99aadfb ("net/smc: no WR buffer wait for terminating link group")
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: Guvenc Gulce <guvenc@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
As mentioned in commit c07aea3ef4d4 ("mm: add a signature in
struct page"):
"The page->signature field is aliased to page->lru.next and
page->compound_head."
And as the comment in page_is_pfmemalloc():
"lru.next has bit 1 set if the page is allocated from the
pfmemalloc reserves. Callers may simply overwrite it if they
do not need to preserve that information."
The page->signature is OR’ed with PP_SIGNATURE when a page is
allocated in page pool, see __page_pool_alloc_pages_slow(),
and page->signature is checked directly with PP_SIGNATURE in
page_pool_return_skb_page(), which might cause resoure leaking
problem for a page from page pool if bit 1 of lru.next is set
for a pfmemalloc page. What happens here is that the original
pp->signature is OR'ed with PP_SIGNATURE after the allocation
in order to preserve any existing bits(such as the bit 1, used
to indicate a pfmemalloc page), so when those bits are present,
those page is not considered to be from page pool and the DMA
mapping of those pages will be left stale.
As bit 0 is for page->compound_head, So mask both bit 0/1 before
the checking in page_pool_return_skb_page(). And we will return
those pfmemalloc pages back to the page allocator after cleaning
up the DMA mapping.
Fixes: 6a5bcd84e886 ("page_pool: Allow drivers to hint on SKB recycling")
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
GCC complains about empty macros in an 'if' statement, so convert
them to 'do {} while (0)' macros.
Fixes these build warnings:
net/dccp/output.c: In function 'dccp_xmit_packet':
../net/dccp/output.c:283:71: warning: suggest braces around empty body in an 'if' statement [-Wempty-body]
283 | dccp_pr_debug("transmit_skb() returned err=%d\n", err);
net/dccp/ackvec.c: In function 'dccp_ackvec_update_old':
../net/dccp/ackvec.c:163:80: warning: suggest braces around empty body in an 'else' statement [-Wempty-body]
163 | (unsigned long long)seqno, state);
Fixes: dc841e30eaea ("dccp: Extend CCID packet dequeueing interface")
Fixes: 380240864451 ("dccp ccid-2: Update code for the Ack Vector input/registration routine")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: dccp@vger.kernel.org
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes for net:
1) Restrict range element expansion in ipset to avoid soft lockup,
from Jozsef Kadlecsik.
2) Memleak in error path for nf_conntrack_bridge for IPv4 packets,
from Yajun Deng.
3) Simplify conntrack garbage collection strategy to avoid frequent
wake-ups, from Florian Westphal.
4) Fix NFNLA_HOOK_FUNCTION_NAME string, do not include module name.
5) Missing chain family netlink attribute in chain description
in nfnetlink_hook.
6) Incorrect sequence number on nfnetlink_hook dumps.
7) Use netlink request family in reply message for consistency.
8) Remove offload_pickup sysctl, use conntrack for established state
instead, from Florian Westphal.
9) Translate NFPROTO_INET/ingress to NFPROTO_NETDEV/ingress, since
NFPROTO_INET is not exposed through nfnetlink_hook.
* git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf:
netfilter: nfnetlink_hook: translate inet ingress to netdev
netfilter: conntrack: remove offload_pickup sysctl again
netfilter: nfnetlink_hook: Use same family as request message
netfilter: nfnetlink_hook: use the sequence number of the request message
netfilter: nfnetlink_hook: missing chain family
netfilter: nfnetlink_hook: strip off module name from hookfn
netfilter: conntrack: collect all entries in one cycle
netfilter: nf_conntrack_bridge: Fix memory leak when error
netfilter: ipset: Limit the maximal range of consecutive elements to add/delete
====================
Link: https://lore.kernel.org/r/20210806151149.6356-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The NFPROTO_INET pseudofamily is not exposed through this new netlink
interface. The netlink dump either shows NFPROTO_IPV4 or NFPROTO_IPV6
for NFPROTO_INET prerouting/input/forward/output/postrouting hooks.
The NFNLA_CHAIN_FAMILY attribute provides the family chain, which
specifies if this hook applies to inet traffic only (either IPv4 or
IPv6).
Translate the inet/ingress hook to netdev/ingress to fully hide the
NFPROTO_INET implementation details.
Fixes: e2cf17d3774c ("netfilter: add new hook nfnl subsystem")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
These two sysctls were added because the hardcoded defaults (2 minutes,
tcp, 30 seconds, udp) turned out to be too low for some setups.
They appeared in 5.14-rc1 so it should be fine to remove it again.
Marcelo convinced me that there should be no difference between a flow
that was offloaded vs. a flow that was not wrt. timeout handling.
Thus the default is changed to those for TCP established and UDP stream,
5 days and 120 seconds, respectively.
Marcelo also suggested to account for the timeout value used for the
offloading, this avoids increase beyond the value in the conntrack-sysctl
and will also instantly expire the conntrack entry with altered sysctls.
Example:
nf_conntrack_udp_timeout_stream=60
nf_flowtable_udp_timeout=60
This will remove offloaded udp flows after one minute, rather than two.
An earlier version of this patch also cleared the ASSURED bit to
allow nf_conntrack to evict the entry via early_drop (i.e., table full).
However, it looks like we can safely assume that connection timed out
via HW is still in established state, so this isn't needed.
Quoting Oz:
[..] the hardware sends all packets with a set FIN flags to sw.
[..] Connections that are aged in hardware are expected to be in the
established state.
In case it turns out that back-to-sw-path transition can occur for
'dodgy' connections too (e.g., one side disappeared while software-path
would have been in RETRANS timeout), we can adjust this later.
Cc: Oz Shlomo <ozsh@nvidia.com>
Cc: Paul Blakey <paulb@nvidia.com>
Suggested-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Reviewed-by: Oz Shlomo <ozsh@nvidia.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Use the same family as the request message, for consistency. The
netlink payload provides sufficient information to describe the hook
object, including the family.
This makes it easier to userspace to correlate the hooks are that
visited by the packets for a certain family.
Fixes: e2cf17d3774c ("netfilter: add new hook nfnl subsystem")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
The sequence number allows to correlate the netlink reply message (as
part of the dump) with the original request message.
The cb->seq field is internally used to detect an interference (update)
of the hook list during the netlink dump, do not use it as sequence
number in the netlink dump header.
Fixes: e2cf17d3774c ("netfilter: add new hook nfnl subsystem")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
The family is relevant for pseudo-families like NFPROTO_INET
otherwise the user needs to rely on the hook function name to
differentiate it from NFPROTO_IPV4 and NFPROTO_IPV6 names.
Add nfnl_hook_chain_desc_attributes instead of using the existing
NFTA_CHAIN_* attributes, since these do not provide a family number.
Fixes: e2cf17d3774c ("netfilter: add new hook nfnl subsystem")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
NFNLA_HOOK_FUNCTION_NAME should include the hook function name only,
the module name is already provided by NFNLA_HOOK_MODULE_NAME.
Fixes: e2cf17d3774c ("netfilter: add new hook nfnl subsystem")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Michal Kubecek reports that conntrack gc is responsible for frequent
wakeups (every 125ms) on idle systems.
On busy systems, timed out entries are evicted during lookup.
The gc worker is only needed to remove entries after system becomes idle
after a busy period.
To resolve this, always scan the entire table.
If the scan is taking too long, reschedule so other work_structs can run
and resume from next bucket.
After a completed scan, wait for 2 minutes before the next cycle.
Heuristics for faster re-schedule are removed.
GC_SCAN_INTERVAL could be exposed as a sysctl in the future to allow
tuning this as-needed or even turn the gc worker off.
Reported-by: Michal Kubecek <mkubecek@suse.cz>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from ipsec.
Current release - regressions:
- sched: taprio: fix init procedure to avoid inf loop when dumping
- sctp: move the active_key update after sh_keys is added
Current release - new code bugs:
- sparx5: fix build with old GCC & bitmask on 32-bit targets
Previous releases - regressions:
- xfrm: redo the PREEMPT_RT RCU vs hash_resize_mutex deadlock fix
- xfrm: fixes for the compat netlink attribute translator
- phy: micrel: Fix detection of ksz87xx switch
Previous releases - always broken:
- gro: set inner transport header offset in tcp/udp GRO hook to avoid
crashes when such packets reach GSO
- vsock: handle VIRTIO_VSOCK_OP_CREDIT_REQUEST, as required by spec
- dsa: sja1105: fix static FDB entries on SJA1105P/Q/R/S and SJA1110
- bridge: validate the NUD_PERMANENT bit when adding an extern_learn
FDB entry
- usb: lan78xx: don't modify phy_device state concurrently
- usb: pegasus: check for errors of IO routines"
* tag 'net-5.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (48 commits)
net: vxge: fix use-after-free in vxge_device_unregister
net: fec: fix use-after-free in fec_drv_remove
net: pegasus: fix uninit-value in get_interrupt_interval
net: ethernet: ti: am65-cpsw: fix crash in am65_cpsw_port_offload_fwd_mark_update()
bnx2x: fix an error code in bnx2x_nic_load()
net: wwan: iosm: fix recursive lock acquire in unregister
net: wwan: iosm: correct data protocol mask bit
net: wwan: iosm: endianness type correction
net: wwan: iosm: fix lkp buildbot warning
net: usb: lan78xx: don't modify phy_device state concurrently
docs: networking: netdevsim rules
net: usb: pegasus: Remove the changelog and DRIVER_VERSION.
net: usb: pegasus: Check the return value of get_geristers() and friends;
net/prestera: Fix devlink groups leakage in error flow
net: sched: fix lockdep_set_class() typo error for sch->seqlock
net: dsa: qca: ar9331: reorder MDIO write sequence
VSOCK: handle VIRTIO_VSOCK_OP_CREDIT_REQUEST
mptcp: drop unused rcu member in mptcp_pm_addr_entry
net: ipv6: fix returned variable type in ip6_skb_dst_mtu
nfp: update ethtool reporting of pauseframe control
...
|
|
syzbot is hitting might_sleep() warning at hci_sock_dev_event() due to
calling lock_sock() with rw spinlock held [1].
It seems that history of this locking problem is a trial and error.
Commit b40df5743ee8 ("[PATCH] bluetooth: fix socket locking in
hci_sock_dev_event()") in 2.6.21-rc4 changed bh_lock_sock() to
lock_sock() as an attempt to fix lockdep warning.
Then, commit 4ce61d1c7a8e ("[BLUETOOTH]: Fix locking in
hci_sock_dev_event().") in 2.6.22-rc2 changed lock_sock() to
local_bh_disable() + bh_lock_sock_nested() as an attempt to fix the
sleep in atomic context warning.
Then, commit 4b5dd696f81b ("Bluetooth: Remove local_bh_disable() from
hci_sock.c") in 3.3-rc1 removed local_bh_disable().
Then, commit e305509e678b ("Bluetooth: use correct lock to prevent UAF
of hdev object") in 5.13-rc5 again changed bh_lock_sock_nested() to
lock_sock() as an attempt to fix CVE-2021-3573.
This difficulty comes from current implementation that
hci_sock_dev_event(HCI_DEV_UNREG) is responsible for dropping all
references from sockets because hci_unregister_dev() immediately
reclaims resources as soon as returning from
hci_sock_dev_event(HCI_DEV_UNREG).
But the history suggests that hci_sock_dev_event(HCI_DEV_UNREG) was not
doing what it should do.
Therefore, instead of trying to detach sockets from device, let's accept
not detaching sockets from device at hci_sock_dev_event(HCI_DEV_UNREG),
by moving actual cleanup of resources from hci_unregister_dev() to
hci_cleanup_dev() which is called by bt_host_release() when all
references to this unregistered device (which is a kobject) are gone.
Since hci_sock_dev_event(HCI_DEV_UNREG) no longer resets
hci_pi(sk)->hdev, we need to check whether this device was unregistered
and return an error based on HCI_UNREGISTER flag. There might be subtle
behavioral difference in "monitor the hdev" functionality; please report
if you found something went wrong due to this patch.
Link: https://syzkaller.appspot.com/bug?extid=a5df189917e79d5e59c9 [1]
Reported-by: syzbot <syzbot+a5df189917e79d5e59c9@syzkaller.appspotmail.com>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Fixes: e305509e678b ("Bluetooth: use correct lock to prevent UAF of hdev object")
Acked-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec
Steffen Klassert says:
====================
pull request (net): ipsec 2021-08-04
1) Fix a sysbot reported memory leak in xfrm_user_rcv_msg.
From Pavel Skripkin.
2) Revert "xfrm: policy: Read seqcount outside of rcu-read side
in xfrm_policy_lookup_bytype". This commit tried to fix a
lockin bug, but only cured some of the symptoms. A proper
fix is applied on top of this revert.
3) Fix a locking bug on xfrm state hash resize. A recent change
on sequence counters accidentally repaced a spinlock by a mutex.
Fix from Frederic Weisbecker.
4) Fix possible user-memory-access in xfrm_user_rcv_msg_compat().
From Dmitry Safonov.
5) Add initialiation sefltest fot xfrm_spdattr_type_t.
From Dmitry Safonov.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
According to comment in qdisc_alloc(), sch->seqlock's lockdep
class key should be set to qdisc_tx_busylock, due to possible
type error, sch->busylock's lockdep class key is set to
qdisc_tx_busylock, which is duplicated because sch->busylock's
lockdep class key is already set in qdisc_alloc().
So fix it by replacing sch->busylock with sch->seqlock.
Fixes: 96009c7d500e ("sched: replace __QDISC_STATE_RUNNING bit with a spin lock")
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
It should be added kfree_skb_list() when err is not equal to zero
in nf_br_ip_fragment().
v2: keep this aligned with IPv6.
v3: modify iter.frag_list to iter.frag.
Fixes: 3c171f496ef5 ("netfilter: bridge: add connection tracking system")
Signed-off-by: Yajun Deng <yajun.deng@linux.dev>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
The range size of consecutive elements were not limited. Thus one could
define a huge range which may result soft lockup errors due to the long
execution time. Now the range size is limited to 2^20 entries.
Reported-by: Brad Spengler <spender@grsecurity.net>
Signed-off-by: Jozsef Kadlecsik <kadlec@netfilter.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
The original implementation of the virtio-vsock driver does not
handle a VIRTIO_VSOCK_OP_CREDIT_REQUEST as required by the
virtio-vsock specification. The vsock device emulated by
vhost-vsock and the virtio-vsock driver never uses this request,
which was probably why nobody noticed it. However, another
implementation of the device may use this request type.
Hence, this commit introduces a way to handle an explicit credit
request by responding with a corresponding credit update as
required by the virtio-vsock specification.
Fixes: 06a8fc78367d ("VSOCK: Introduce virtio_vsock_common.ko")
Signed-off-by: Harshavardhan Unnibhavi <harshanavkis@gmail.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Link: https://lore.kernel.org/r/20210802173506.2383-1-harshanavkis@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
kfree_rcu() had been removed from pm_netlink.c, so this rcu field in
struct mptcp_pm_addr_entry became useless. Let's drop it.
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Link: https://lore.kernel.org/r/20210802231914.54709-1-mathew.j.martineau@linux.intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In commit 58acd1009226 ("sctp: update active_key for asoc when old key is
being replaced"), sctp_auth_asoc_init_active_key() is called to update
the active_key right after the old key is deleted and before the new key
is added, and it caused that the active_key could be found with the key_id.
In Ying Xu's testing, the BUG_ON in sctp_auth_asoc_init_active_key() was
triggered:
[ ] kernel BUG at net/sctp/auth.c:416!
[ ] RIP: 0010:sctp_auth_asoc_init_active_key.part.8+0xe7/0xf0 [sctp]
[ ] Call Trace:
[ ] sctp_auth_set_key+0x16d/0x1b0 [sctp]
[ ] sctp_setsockopt.part.33+0x1ba9/0x2bd0 [sctp]
[ ] __sys_setsockopt+0xd6/0x1d0
[ ] __x64_sys_setsockopt+0x20/0x30
[ ] do_syscall_64+0x5b/0x1a0
So fix it by moving the active_key update after sh_keys is added.
Fixes: 58acd1009226 ("sctp: update active_key for asoc when old key is being replaced")
Reported-by: Ying Xu <yinxu@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
entry
Currently it is possible to add broken extern_learn FDB entries to the
bridge in two ways:
1. Entries pointing towards the bridge device that are not local/permanent:
ip link add br0 type bridge
bridge fdb add 00:01:02:03:04:05 dev br0 self extern_learn static
2. Entries pointing towards the bridge device or towards a port that
are marked as local/permanent, however the bridge does not process the
'permanent' bit in any way, therefore they are recorded as though they
aren't permanent:
ip link add br0 type bridge
bridge fdb add 00:01:02:03:04:05 dev br0 self extern_learn permanent
Since commit 52e4bec15546 ("net: bridge: switchdev: treat local FDBs the
same as entries towards the bridge"), these incorrect FDB entries can
even trigger NULL pointer dereferences inside the kernel.
This is because that commit made the assumption that all FDB entries
that are not local/permanent have a valid destination port. For context,
local / permanent FDB entries either have fdb->dst == NULL, and these
point towards the bridge device and are therefore local and not to be
used for forwarding, or have fdb->dst == a net_bridge_port structure
(but are to be treated in the same way, i.e. not for forwarding).
That assumption _is_ correct as long as things are working correctly in
the bridge driver, i.e. we cannot logically have fdb->dst == NULL under
any circumstance for FDB entries that are not local. However, the
extern_learn code path where FDB entries are managed by a user space
controller show that it is possible for the bridge kernel driver to
misinterpret the NUD flags of an entry transmitted by user space, and
end up having fdb->dst == NULL while not being a local entry. This is
invalid and should be rejected.
Before, the two commands listed above both crashed the kernel in this
check from br_switchdev_fdb_notify:
struct net_device *dev = info.is_local ? br->dev : dst->dev;
info.is_local == false, dst == NULL.
After this patch, the invalid entry added by the first command is
rejected:
ip link add br0 type bridge && bridge fdb add 00:01:02:03:04:05 dev br0 self extern_learn static; ip link del br0
Error: bridge: FDB entry towards bridge must be permanent.
and the valid entry added by the second command is properly treated as a
local address and does not crash br_switchdev_fdb_notify anymore:
ip link add br0 type bridge && bridge fdb add 00:01:02:03:04:05 dev br0 self extern_learn permanent; ip link del br0
Fixes: eb100e0e24a2 ("net: bridge: allow to add externally learned entries from user-space")
Reported-by: syzbot+9ba1174359adba5a5b7c@syzkaller.appspotmail.com
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Acked-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Link: https://lore.kernel.org/r/20210801231730.7493-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Commit 13511704f8d759 ("net: taprio offload: enforce qdisc to netdev queue mapping")
resulted in duplicate entries in the qdisc hash.
While this did not impact the overall operation of the qdisc and taprio
code paths, it did result in an infinite loop when dumping the qdisc
properties, at least on one target (NXP LS1028 ARDB).
Removing the duplicate call to qdisc_hash_add() solves the problem.
Fixes: 13511704f8d759 ("net: taprio offload: enforce qdisc to netdev queue mapping")
Signed-off-by: Yannick Vignon <yannick.vignon@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
GSO expects inner transport header offset to be valid when
skb->encapsulation flag is set. GSO uses this value to calculate the length
of an individual segment of a GSO packet in skb_gso_transport_seglen().
However, tcp/udp gro_complete callbacks don't update the
skb->inner_transport_header when processing an encapsulated TCP/UDP
segment. As a result a GRO skb has ->inner_transport_header set to a value
carried over from earlier skb processing.
This can have mild to tragic consequences. From miscalculating the GSO
segment length to triggering a page fault [1], when trying to read TCP/UDP
header at an address past the skb->data page.
The latter scenario leads to an oops report like so:
BUG: unable to handle page fault for address: ffff9fa7ec00d008
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 123f201067 P4D 123f201067 PUD 123f209067 PMD 0
Oops: 0000 [#1] SMP NOPTI
CPU: 44 PID: 0 Comm: swapper/44 Not tainted 5.4.53-cloudflare-2020.7.21 #1
Hardware name: HYVE EDGE-METAL-GEN10/HS-1811DLite1, BIOS V2.15 02/21/2020
RIP: 0010:skb_gso_transport_seglen+0x44/0xa0
Code: c0 41 83 e0 11 f6 87 81 00 00 00 20 74 30 0f b7 87 aa 00 00 00 0f [...]
RSP: 0018:ffffad8640bacbb8 EFLAGS: 00010202
RAX: 000000000000feda RBX: ffff9fcc8d31bc00 RCX: ffff9fa7ec00cffc
RDX: ffff9fa7ebffdec0 RSI: 000000000000feda RDI: 0000000000000122
RBP: 00000000000005c4 R08: 0000000000000001 R09: 0000000000000000
R10: ffff9fe588ae3800 R11: ffff9fe011fc92f0 R12: ffff9fcc8d31bc00
R13: ffff9fe0119d4300 R14: 00000000000005c4 R15: ffff9fba57d70900
FS: 0000000000000000(0000) GS:ffff9fe68df00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffff9fa7ec00d008 CR3: 0000003e99b1c000 CR4: 0000000000340ee0
Call Trace:
<IRQ>
skb_gso_validate_network_len+0x11/0x70
__ip_finish_output+0x109/0x1c0
ip_sublist_rcv_finish+0x57/0x70
ip_sublist_rcv+0x2aa/0x2d0
? ip_rcv_finish_core.constprop.0+0x390/0x390
ip_list_rcv+0x12b/0x14f
__netif_receive_skb_list_core+0x2a9/0x2d0
netif_receive_skb_list_internal+0x1b5/0x2e0
napi_complete_done+0x93/0x140
veth_poll+0xc0/0x19f [veth]
? mlx5e_napi_poll+0x221/0x610 [mlx5_core]
net_rx_action+0x1f8/0x790
__do_softirq+0xe1/0x2bf
irq_exit+0x8e/0xc0
do_IRQ+0x58/0xe0
common_interrupt+0xf/0xf
</IRQ>
The bug can be observed in a simple setup where we send IP/GRE/IP/TCP
packets into a netns over a veth pair. Inside the netns, packets are
forwarded to dummy device:
trafgen -> [veth A]--[veth B] -forward-> [dummy]
For veth B to GRO aggregate packets on receive, it needs to have an XDP
program attached (for example, a trivial XDP_PASS). Additionally, for UDP,
we need to enable GSO_UDP_L4 feature on the device:
ip netns exec A ethtool -K AB rx-udp-gro-forwarding on
The last component is an artificial delay to increase the chances of GRO
batching happening:
ip netns exec A tc qdisc add dev AB root \
netem delay 200us slot 5ms 10ms packets 2 bytes 64k
With such a setup in place, the bug can be observed by tracing the skb
outer and inner offsets when GSO skb is transmitted from the dummy device:
tcp:
FUNC DEV SKB_LEN NH TH ENC INH ITH GSO_SIZE GSO_TYPE
ip_finish_output dumB 2830 270 290 1 294 254 1383 (tcpv4,gre,)
^^^
udp:
FUNC DEV SKB_LEN NH TH ENC INH ITH GSO_SIZE GSO_TYPE
ip_finish_output dumB 2818 270 290 1 294 254 1383 (gre,udp_l4,)
^^^
Fix it by updating the inner transport header offset in tcp/udp
gro_complete callbacks, similar to how {inet,ipv6}_gro_complete callbacks
update the inner network header offset, when skb->encapsulation flag is
set.
[1] https://lore.kernel.org/netdev/CAKxSbF01cLpZem2GFaUaifh0S-5WYViZemTicAg7FCHOnh6kug@mail.gmail.com/
Fixes: bf296b125b21 ("tcp: Add GRO support")
Fixes: f993bc25e519 ("net: core: handle encapsulation offloads when computing segment lengths")
Fixes: e20cf8d3f1f7 ("udp: implement GRO for plain UDP sockets.")
Reported-by: Alex Forster <aforster@cloudflare.com>
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Networking fixes for 5.14-rc4, including fixes from bpf, can, WiFi
(mac80211) and netfilter trees.
Current release - regressions:
- mac80211: fix starting aggregation sessions on mesh interfaces
Current release - new code bugs:
- sctp: send pmtu probe only if packet loss in Search Complete state
- bnxt_en: add missing periodic PHC overflow check
- devlink: fix phys_port_name of virtual port and merge error
- hns3: change the method of obtaining default ptp cycle
- can: mcba_usb_start(): add missing urb->transfer_dma initialization
Previous releases - regressions:
- set true network header for ECN decapsulation
- mlx5e: RX, avoid possible data corruption w/ relaxed ordering and
LRO
- phy: re-add check for PHY_BRCM_DIS_TXCRXC_NOENRGY on the BCM54811
PHY
- sctp: fix return value check in __sctp_rcv_asconf_lookup
Previous releases - always broken:
- bpf:
- more spectre corner case fixes, introduce a BPF nospec
instruction for mitigating Spectre v4
- fix OOB read when printing XDP link fdinfo
- sockmap: fix cleanup related races
- mac80211: fix enabling 4-address mode on a sta vif after assoc
- can:
- raw: raw_setsockopt(): fix raw_rcv panic for sock UAF
- j1939: j1939_session_deactivate(): clarify lifetime of session
object, avoid UAF
- fix number of identical memory leaks in USB drivers
- tipc:
- do not blindly write skb_shinfo frags when doing decryption
- fix sleeping in tipc accept routine"
* tag 'net-5.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (91 commits)
gve: Update MAINTAINERS list
can: esd_usb2: fix memory leak
can: ems_usb: fix memory leak
can: usb_8dev: fix memory leak
can: mcba_usb_start(): add missing urb->transfer_dma initialization
can: hi311x: fix a signedness bug in hi3110_cmd()
MAINTAINERS: add Yasushi SHOJI as reviewer for the Microchip CAN BUS Analyzer Tool driver
bpf: Fix leakage due to insufficient speculative store bypass mitigation
bpf: Introduce BPF nospec instruction for mitigating Spectre v4
sis900: Fix missing pci_disable_device() in probe and remove
net: let flow have same hash in two directions
nfc: nfcsim: fix use after free during module unload
tulip: windbond-840: Fix missing pci_disable_device() in probe and remove
sctp: fix return value check in __sctp_rcv_asconf_lookup
nfc: s3fwrn5: fix undefined parameter values in dev_err()
net/mlx5: Fix mlx5_vport_tbl_attr chain from u16 to u32
net/mlx5e: Fix nullptr in mlx5e_hairpin_get_mdev()
net/mlx5: Unload device upon firmware fatal error
net/mlx5e: Fix page allocation failure for ptp-RQ over SF
net/mlx5e: Fix page allocation failure for trap-RQ over SF
...
|
|
Daniel Borkmann says:
====================
pull-request: bpf 2021-07-29
The following pull-request contains BPF updates for your *net* tree.
We've added 9 non-merge commits during the last 14 day(s) which contain
a total of 20 files changed, 446 insertions(+), 138 deletions(-).
The main changes are:
1) Fix UBSAN out-of-bounds splat for showing XDP link fdinfo, from Lorenz Bauer.
2) Fix insufficient Spectre v4 mitigation in BPF runtime, from Daniel Borkmann,
Piotr Krysiuk and Benedict Schlueter.
3) Batch of fixes for BPF sockmap found under stress testing, from John Fastabend.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
unix_gc() assumes that candidate sockets can never gain an external
reference (i.e. be installed into an fd) while the unix_gc_lock is
held. Except for MSG_PEEK this is guaranteed by modifying inflight
count under the unix_gc_lock.
MSG_PEEK does not touch any variable protected by unix_gc_lock (file
count is not), yet it needs to be serialized with garbage collection.
Do this by locking/unlocking unix_gc_lock:
1) increment file count
2) lock/unlock barrier to make sure incremented file count is visible
to garbage collection
3) install file into fd
This is a lock barrier (unlike smp_mb()) that ensures that garbage
collection is run completely before or completely after the barrier.
Cc: <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
using same source and destination ip/port for flow hash calculation
within the two directions.
Signed-off-by: zhang kai <zhangkaiheb@126.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
As Ben Hutchings noticed, this check should have been inverted: the call
returns true in case of success.
Reported-by: Ben Hutchings <ben@decadent.org.uk>
Fixes: 0c5dc070ff3d ("sctp: validate from_addr_param return")
Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Reviewed-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
If backlog handler is running during a tear down operation we may enqueue
data on the ingress msg queue while tear down is trying to free it.
sk_psock_backlog()
sk_psock_handle_skb()
skb_psock_skb_ingress()
sk_psock_skb_ingress_enqueue()
sk_psock_queue_msg(psock,msg)
spin_lock(ingress_lock)
sk_psock_zap_ingress()
_sk_psock_purge_ingerss_msg()
_sk_psock_purge_ingress_msg()
-- free ingress_msg list --
spin_unlock(ingress_lock)
spin_lock(ingress_lock)
list_add_tail(msg,ingress_msg) <- entry on list with no one
left to free it.
spin_unlock(ingress_lock)
To fix we only enqueue from backlog if the ENABLED bit is set. The tear
down logic clears the bit with ingress_lock set so we wont enqueue the
msg in the last step.
Fixes: 799aa7f98d53 ("skmsg: Avoid lock_sock() in sk_psock_backlog()")
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Jakub Sitnicki <jakub@cloudflare.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20210727160500.1713554-4-john.fastabend@gmail.com
|
|
Its possible if a socket is closed and the receive thread is under memory
pressure it may have cached a skb. We need to ensure these skbs are
free'd along with the normal ingress_skb queue.
Before 799aa7f98d53 ("skmsg: Avoid lock_sock() in sk_psock_backlog()") tear
down and backlog processing both had sock_lock for the common case of
socket close or unhash. So it was not possible to have both running in
parrallel so all we would need is the kfree in those kernels.
But, latest kernels include the commit 799aa7f98d5e and this requires a
bit more work. Without the ingress_lock guarding reading/writing the
state->skb case its possible the tear down could run before the state
update causing it to leak memory or worse when the backlog reads the state
it could potentially run interleaved with the tear down and we might end up
free'ing the state->skb from tear down side but already have the reference
from backlog side. To resolve such races we wrap accesses in ingress_lock
on both sides serializing tear down and backlog case. In both cases this
only happens after an EAGAIN error case so having an extra lock in place
is likely fine. The normal path will skip the locks.
Note, we check state->skb before grabbing lock. This works because
we can only enqueue with the mutex we hold already. Avoiding a race
on adding state->skb after the check. And if tear down path is running
that is also fine if the tear down path then removes state->skb we
will simply set skb=NULL and the subsequent goto is skipped. This
slight complication avoids locking in normal case.
With this fix we no longer see this warning splat from tcp side on
socket close when we hit the above case with redirect to ingress self.
[224913.935822] WARNING: CPU: 3 PID: 32100 at net/core/stream.c:208 sk_stream_kill_queues+0x212/0x220
[224913.935841] Modules linked in: fuse overlay bpf_preload x86_pkg_temp_thermal intel_uncore wmi_bmof squashfs sch_fq_codel efivarfs ip_tables x_tables uas xhci_pci ixgbe mdio xfrm_algo xhci_hcd wmi
[224913.935897] CPU: 3 PID: 32100 Comm: fgs-bench Tainted: G I 5.14.0-rc1alu+ #181
[224913.935908] Hardware name: Dell Inc. Precision 5820 Tower/002KVM, BIOS 1.9.2 01/24/2019
[224913.935914] RIP: 0010:sk_stream_kill_queues+0x212/0x220
[224913.935923] Code: 8b 83 20 02 00 00 85 c0 75 20 5b 5d 41 5c 41 5d 41 5e 41 5f c3 48 89 df e8 2b 11 fe ff eb c3 0f 0b e9 7c ff ff ff 0f 0b eb ce <0f> 0b 5b 5d 41 5c 41 5d 41 5e 41 5f c3 90 0f 1f 44 00 00 41 57 41
[224913.935932] RSP: 0018:ffff88816271fd38 EFLAGS: 00010206
[224913.935941] RAX: 0000000000000ae8 RBX: ffff88815acd5240 RCX: dffffc0000000000
[224913.935948] RDX: 0000000000000003 RSI: 0000000000000ae8 RDI: ffff88815acd5460
[224913.935954] RBP: ffff88815acd5460 R08: ffffffff955c0ae8 R09: fffffbfff2e6f543
[224913.935961] R10: ffffffff9737aa17 R11: fffffbfff2e6f542 R12: ffff88815acd5390
[224913.935967] R13: ffff88815acd5480 R14: ffffffff98d0c080 R15: ffffffff96267500
[224913.935974] FS: 00007f86e6bd1700(0000) GS:ffff888451cc0000(0000) knlGS:0000000000000000
[224913.935981] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[224913.935988] CR2: 000000c0008eb000 CR3: 00000001020e0005 CR4: 00000000003706e0
[224913.935994] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[224913.936000] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[224913.936007] Call Trace:
[224913.936016] inet_csk_destroy_sock+0xba/0x1f0
[224913.936033] __tcp_close+0x620/0x790
[224913.936047] tcp_close+0x20/0x80
[224913.936056] inet_release+0x8f/0xf0
[224913.936070] __sock_release+0x72/0x120
[224913.936083] sock_close+0x14/0x20
Fixes: a136678c0bdbb ("bpf: sk_msg, zap ingress queue on psock down")
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Jakub Sitnicki <jakub@cloudflare.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20210727160500.1713554-3-john.fastabend@gmail.com
|
|
We don't want strparser to run and pass skbs into skmsg handlers when
the psock is null. We just sk_drop them in this case. When removing
a live socket from map it means extra drops that we do not need to
incur. Move the zap below strparser close to avoid this condition.
This way we stop the stream parser first stopping it from processing
packets and then delete the psock.
Fixes: a136678c0bdbb ("bpf: sk_msg, zap ingress queue on psock down")
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Jakub Sitnicki <jakub@cloudflare.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20210727160500.1713554-2-john.fastabend@gmail.com
|
|
Syzbot reported skb_over_panic() in llc_pdu_init_as_xid_cmd(). The
problem was in wrong LCC header manipulations.
Syzbot's reproducer tries to send XID packet. llc_ui_sendmsg() is
doing following steps:
1. skb allocation with size = len + header size
len is passed from userpace and header size
is 3 since addr->sllc_xid is set.
2. skb_reserve() for header_len = 3
3. filling all other space with memcpy_from_msg()
Ok, at this moment we have fully loaded skb, only headers needs to be
filled.
Then code comes to llc_sap_action_send_xid_c(). This function pushes 3
bytes for LLC PDU header and initializes it. Then comes
llc_pdu_init_as_xid_cmd(). It initalizes next 3 bytes *AFTER* LLC PDU
header and call skb_push(skb, 3). This looks wrong for 2 reasons:
1. Bytes rigth after LLC header are user data, so this function
was overwriting payload.
2. skb_push(skb, 3) call can cause skb_over_panic() since
all free space was filled in llc_ui_sendmsg(). (This can
happen is user passed 686 len: 686 + 14 (eth header) + 3 (LLC
header) = 703. SKB_DATA_ALIGN(703) = 704)
So, in this patch I added 2 new private constansts: LLC_PDU_TYPE_U_XID
and LLC_PDU_LEN_U_XID. LLC_PDU_LEN_U_XID is used to correctly reserve
header size to handle LLC + XID case. LLC_PDU_TYPE_U_XID is used by
llc_pdu_header_init() function to push 6 bytes instead of 3. And finally
I removed skb_push() call from llc_pdu_init_as_xid_cmd().
This changes should not affect other parts of LLC, since after
all steps we just transmit buffer.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-and-tested-by: syzbot+5e5a981ad7cc54c4b2b4@syzkaller.appspotmail.com
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
sctp_inet6addr_event deletes 'addr' from 'local_addr_list' when setting
netdev down, but it is possible to delete the incorrect entry (match
the first one with the same ipaddr, but the different 'ifindex'), if
there are some netdevs with the same 'local-link' ipaddr added already.
It should delete the entry depending on 'sin6_addr' and 'sin6_scope_id'
both. otherwise, the endpoint will call 'sctp_sf_ootb' if it can't find
the according association when receives 'heartbeat', and finally will
reply 'abort'.
For example:
1.when linux startup
the entries in local_addr_list:
ifindex:35 addr:fe80::40:43ff:fe80:0 (eths0.201)
ifindex:36 addr:fe80::40:43ff:fe80:0 (eths0.209)
ifindex:37 addr:fe80::40:43ff:fe80:0 (eths0.210)
the route table:
local fe80::40:43ff:fe80:0 dev eths0.201
local fe80::40:43ff:fe80:0 dev eths0.209
local fe80::40:43ff:fe80:0 dev eths0.210
2.after 'ifconfig eths0.209 down'
the entries in local_addr_list:
ifindex:36 addr:fe80::40:43ff:fe80:0 (eths0.209)
ifindex:37 addr:fe80::40:43ff:fe80:0 (eths0.210)
the route table:
local fe80::40:43ff:fe80:0 dev eths0.201
local fe80::40:43ff:fe80:0 dev eths0.210
3.asoc not found for src:[fe80::40:43ff:fe80:0]:37381 dst:[:1]:53335
::1->fe80::40:43ff:fe80:0 HEARTBEAT
fe80::40:43ff:fe80:0->::1 ABORT
Signed-off-by: Chen Shen <peterchenshen@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
