summaryrefslogtreecommitdiff
path: root/net
AgeCommit message (Collapse)Author
2016-10-26sctp: fix the panic caused by route updateXin Long
Commit 7303a1475008 ("sctp: identify chunks that need to be fragmented at IP level") made the chunk be fragmented at IP level in the next round if it's size exceed PMTU. But there still is another case, PMTU can be updated if transport's dst expires and transport's pmtu_pending is set in sctp_packet_transmit. If the new PMTU is less than the chunk, the same issue with that commit can be triggered. So we should drop this packet and let it retransmit in another round where it would be fragmented at IP level. This patch is to fix it by checking the chunk size after PMTU may be updated and dropping this packet if it's size exceed PMTU. Fixes: 90017accff61 ("sctp: Add GSO support") Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Neil Horman <nhorman@txudriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-23Merge branch 'for-upstream' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth Johan Hedberg says: ==================== pull request: bluetooth 2016-10-21 Here are some more Bluetooth fixes for the 4.9 kernel: - Fix to btwilink driver probe function return value - Power management fix to hci_bcm - Fix to encoding name in scan response data Please let me know if there are any issues pulling. Thanks. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-23net: sctp, forbid negative lengthJiri Slaby
Most of getsockopt handlers in net/sctp/socket.c check len against sizeof some structure like: if (len < sizeof(int)) return -EINVAL; On the first look, the check seems to be correct. But since len is int and sizeof returns size_t, int gets promoted to unsigned size_t too. So the test returns false for negative lengths. Yes, (-1 < sizeof(long)) is false. Fix this in sctp by explicitly checking len < 0 before any getsockopt handler is called. Note that sctp_getsockopt_events already handled the negative case. Since we added the < 0 check elsewhere, this one can be removed. If not checked, this is the result: UBSAN: Undefined behaviour in ../mm/page_alloc.c:2722:19 shift exponent 52 is too large for 32-bit type 'int' CPU: 1 PID: 24535 Comm: syz-executor Not tainted 4.8.1-0-syzkaller #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.9.1-0-gb3ef39f-prebuilt.qemu-project.org 04/01/2014 0000000000000000 ffff88006d99f2a8 ffffffffb2f7bdea 0000000041b58ab3 ffffffffb4363c14 ffffffffb2f7bcde ffff88006d99f2d0 ffff88006d99f270 0000000000000000 0000000000000000 0000000000000034 ffffffffb5096422 Call Trace: [<ffffffffb3051498>] ? __ubsan_handle_shift_out_of_bounds+0x29c/0x300 ... [<ffffffffb273f0e4>] ? kmalloc_order+0x24/0x90 [<ffffffffb27416a4>] ? kmalloc_order_trace+0x24/0x220 [<ffffffffb2819a30>] ? __kmalloc+0x330/0x540 [<ffffffffc18c25f4>] ? sctp_getsockopt_local_addrs+0x174/0xca0 [sctp] [<ffffffffc18d2bcd>] ? sctp_getsockopt+0x10d/0x1b0 [sctp] [<ffffffffb37c1219>] ? sock_common_getsockopt+0xb9/0x150 [<ffffffffb37be2f5>] ? SyS_getsockopt+0x1a5/0x270 Signed-off-by: Jiri Slaby <jslaby@suse.cz> Cc: Vlad Yasevich <vyasevich@gmail.com> Cc: Neil Horman <nhorman@tuxdriver.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: linux-sctp@vger.kernel.org Cc: netdev@vger.kernel.org Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-23ipv6: do not increment mac header when it's unsetJason A. Donenfeld
Otherwise we'll overflow the integer. This occurs when layer 3 tunneled packets are handed off to the IPv6 layer. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-22ipv4: use the right lock for ping_group_rangeWANG Cong
This reverts commit a681574c99be23e4d20b769bf0e543239c364af5 ("ipv4: disable BH in set_ping_group_range()") because we never read ping_group_range in BH context (unlike local_port_range). Then, since we already have a lock for ping_group_range, those using ip_local_ports.lock for ping_group_range are clearly typos. We might consider to share a same lock for both ping_group_range and local_port_range w.r.t. space saving, but that should be for net-next. Fixes: a681574c99be ("ipv4: disable BH in set_ping_group_range()") Fixes: ba6b918ab234 ("ping: move ping_group_range out of CONFIG_SYSCTL") Cc: Eric Dumazet <edumazet@google.com> Cc: Eric Salo <salo@google.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-22netns: revert "netns: avoid disabling irq for netns id"Paul Moore
This reverts commit bc51dddf98c9 ("netns: avoid disabling irq for netns id") as it was found to cause problems with systems running SELinux/audit, see the mailing list thread below: * http://marc.info/?t=147694653900002&r=1&w=2 Eventually we should be able to reintroduce this code once we have rewritten the audit multicast code to queue messages much the same way we do for unicast messages. A tracking issue for this can be found below: * https://github.com/linux-audit/audit-kernel/issues/23 Reported-by: Stephen Smalley <sds@tycho.nsa.gov> Reported-by: Elad Raz <e@eladraz.com> Cc: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: Paul Moore <paul@paul-moore.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-21ipv6: fix a potential deadlock in do_ipv6_setsockopt()WANG Cong
Baozeng reported this deadlock case: CPU0 CPU1 ---- ---- lock([ 165.136033] sk_lock-AF_INET6); lock([ 165.136033] rtnl_mutex); lock([ 165.136033] sk_lock-AF_INET6); lock([ 165.136033] rtnl_mutex); Similar to commit 87e9f0315952 ("ipv4: fix a potential deadlock in mcast getsockopt() path") this is due to we still have a case, ipv6_sock_mc_close(), where we acquire sk_lock before rtnl_lock. Close this deadlock with the similar solution, that is always acquire rtnl lock first. Fixes: baf606d9c9b1 ("ipv4,ipv6: grab rtnl before locking the socket") Reported-by: Baozeng Ding <sploving1@gmail.com> Tested-by: Baozeng Ding <sploving1@gmail.com> Cc: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Reviewed-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-21Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nfDavid S. Miller
Pablo Neira Ayuso says: ==================== Netfilter fixes for net The following patchset contains Netfilter fixes for your net tree, they are: 1) Fix compilation warning in xt_hashlimit on m68k 32-bits, from Geert Uytterhoeven. 2) Fix wrong timeout in set elements added from packet path via nft_dynset, from Anders K. Pedersen. 3) Remove obsolete nf_conntrack_events_retry_timeout sysctl documentation, from Nicolas Dichtel. 4) Ensure proper initialization of log flags via xt_LOG, from Liping Zhang. 5) Missing alias to autoload ipcomp, also from Liping Zhang. 6) Missing NFTA_HASH_OFFSET attribute validation, again from Liping. 7) Wrong integer type in the new nft_parse_u32_check() function, from Dan Carpenter. 8) Another wrong integer type declaration in nft_exthdr_init, also from Dan Carpenter. 9) Fix insufficient mode validation in nft_range. 10) Fix compilation warning in nft_range due to possible uninitialized value, from Arnd Bergmann. 11) Zero nf_hook_ops allocated via xt_hook_alloc() in x_tables to calm down kmemcheck, from Florian Westphal. 12) Schedule gc_worker() to run again if GC_MAX_EVICTS quota is reached, from Nicolas Dichtel. 13) Fix nf_queue() after conversion to single-linked hook list, related to incorrect bypass flag handling and incorrect hook point of reinjection. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-20ipv4: disable BH in set_ping_group_range()Eric Dumazet
In commit 4ee3bd4a8c746 ("ipv4: disable BH when changing ip local port range") Cong added BH protection in set_local_port_range() but missed that same fix was needed in set_ping_group_range() Fixes: b8f1a55639e6 ("udp: Add function to make source port for UDP tunnels") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Eric Salo <salo@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-20udp: must lock the socket in udp_disconnect()Eric Dumazet
Baozeng Ding reported KASAN traces showing uses after free in udp_lib_get_port() and other related UDP functions. A CONFIG_DEBUG_PAGEALLOC=y kernel would eventually crash. I could write a reproducer with two threads doing : static int sock_fd; static void *thr1(void *arg) { for (;;) { connect(sock_fd, (const struct sockaddr *)arg, sizeof(struct sockaddr_in)); } } static void *thr2(void *arg) { struct sockaddr_in unspec; for (;;) { memset(&unspec, 0, sizeof(unspec)); connect(sock_fd, (const struct sockaddr *)&unspec, sizeof(unspec)); } } Problem is that udp_disconnect() could run without holding socket lock, and this was causing list corruptions. Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Baozeng Ding <sploving1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-20net: add recursion limit to GROSabrina Dubroca
Currently, GRO can do unlimited recursion through the gro_receive handlers. This was fixed for tunneling protocols by limiting tunnel GRO to one level with encap_mark, but both VLAN and TEB still have this problem. Thus, the kernel is vulnerable to a stack overflow, if we receive a packet composed entirely of VLAN headers. This patch adds a recursion counter to the GRO layer to prevent stack overflow. When a gro_receive function hits the recursion limit, GRO is aborted for this skb and it is processed normally. This recursion counter is put in the GRO CB, but could be turned into a percpu counter if we run out of space in the CB. Thanks to Vladimír Beneš <vbenes@redhat.com> for the initial bug report. Fixes: CVE-2016-7039 Fixes: 9b174d88c257 ("net: Add Transparent Ethernet Bridging GRO support.") Fixes: 66e5133f19e9 ("vlan: Add GRO support for non hardware accelerated vlan") Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Jiri Benc <jbenc@redhat.com> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Acked-by: Tom Herbert <tom@herbertland.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-20ipv6: properly prevent temp_prefered_lft sysctl raceJiri Bohac
The check for an underflow of tmp_prefered_lft is always false because tmp_prefered_lft is unsigned. The intention of the check was to guard against racing with an update of the temp_prefered_lft sysctl, potentially resulting in an underflow. As suggested by David Miller, the best way to prevent the race is by reading the sysctl variable using READ_ONCE. Signed-off-by: Jiri Bohac <jbohac@suse.cz> Reported-by: Julia Lawall <julia.lawall@lip6.fr> Fixes: 76506a986dc3 ("IPv6: fix DESYNC_FACTOR") Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-20netfilter: fix nf_queue handlingPablo Neira Ayuso
nf_queue handling is broken since e3b37f11e6e4 ("netfilter: replace list_head with single linked list") for two reasons: 1) If the bypass flag is set on, there are no userspace listeners and we still have more hook entries to iterate over, then jump to the next hook. Otherwise accept the packet. On nf_reinject() path, the okfn() needs to be invoked. 2) We should not re-enter the same hook on packet reinjection. If the packet is accepted, we have to skip the current hook from where the packet was enqueued, otherwise the packets gets enqueued over and over again. This restores the previous list_for_each_entry_continue() behaviour happening from nf_iterate() that was dealing with these two cases. This patch introduces a new nf_queue() wrapper function so this fix becomes simpler. Fixes: e3b37f11e6e4 ("netfilter: replace list_head with single linked list") Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2016-10-20netfilter: conntrack: restart gc immediately if GC_MAX_EVICTS is reachedNicolas Dichtel
When the maximum evictions number is reached, do not wait 5 seconds before the next run. CC: Florian Westphal <fw@strlen.de> Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Acked-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2016-10-20net/ncsi: Improve HNCDSC AEN handlerGavin Shan
This improves AEN handler for Host Network Controller Driver Status Change (HNCDSC): * The channel's lock should be hold when accessing its state. * Do failover when host driver isn't ready. * Configure channel when host driver becomes ready. Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-20net/ncsi: Choose hot channel as active one if necessaryGavin Shan
The issue was found on BCM5718 which has two NCSI channels in one package: C0 and C1. C0 is in link-up state while C1 is in link-down state. C0 is chosen as active channel until unplugging and plugging C0's cable: On unplugging C0's cable, LSC (Link State Change) AEN packet received on C0 to report link-down event. After that, C1 is chosen as active channel. LSC AEN for link-up event is lost on C0 when plugging C0's cable back. We lose the network even C0 is usable. This resolves the issue by recording the (hot) channel that was ever chosen as active one. The hot channel is chosen to be active one if none of available channels in link-up state. With this, C0 is still the active one after unplugging C0's cable. LSC AEN packet received on C0 when plugging its cable back. Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-20net/ncsi: Fix stale link state of inactive channels on failoverGavin Shan
The issue was found on BCM5718 which has two NCSI channels in one package: C0 and C1. Both of them are connected to different LANs, means they are in link-up state and C0 is chosen as the active one until resetting BCM5718 happens as below. Resetting BCM5718 results in LSC (Link State Change) AEN packet received on C0, meaning LSC AEN is missed on C1. When LSC AEN packet received on C0 to report link-down, it fails over to C1 because C1 is in link-up state as software can see. However, C1 is in link-down state in hardware. It means the link state is out of synchronization between hardware and software, resulting in inappropriate channel (C1) selected as active one. This resolves the issue by sending separate GLS (Get Link Status) commands to all channels in the package before trying to do failover. The last link states of all channels in the package are retrieved. With it, C0 (not C1) is selected as active one as expected. Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-20net/ncsi: Avoid if statements in ncsi_suspend_channel()Gavin Shan
There are several if/else statements in the state machine implemented by switch/case in ncsi_suspend_channel() to avoid duplicated code. It makes the code a bit hard to be understood. This drops if/else statements in ncsi_suspend_channel() to improve the code readability as Joel Stanley suggested. Also, it becomes easy to add more states in the state machine without affecting current code. No logical changes introduced by this. Suggested-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-20net/sched: act_mirred: Use passed lastuse argumentPaul Blakey
stats_update callback is called by NIC drivers doing hardware offloading of the mirred action. Lastuse is passed as argument to specify when the stats was actually last updated and is not always the current time. Fixes: 9798e6fe4f9b ('net: act_mirred: allow statistic updates from offloaded actions') Signed-off-by: Paul Blakey <paulb@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-19Bluetooth: Fix append max 11 bytes of name to scan rsp dataMichał Narajowski
Append maximum of 10 + 1 bytes of name to scan response data. Complete name is appended only if exists and is <= 10 characters. Else append short name if exists or shorten complete name if not. This makes sure name is consistent across multiple advertising instances. Signed-off-by: Michał Narajowski <michal.narajowski@codecoup.pl> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-10-19netfilter: x_tables: suppress kmemcheck warningFlorian Westphal
Markus Trippelsdorf reports: WARNING: kmemcheck: Caught 64-bit read from uninitialized memory (ffff88001e605480) 4055601e0088ffff000000000000000090686d81ffffffff0000000000000000 u u u u u u u u u u u u u u u u i i i i i i i i u u u u u u u u ^ |RIP: 0010:[<ffffffff8166e561>] [<ffffffff8166e561>] nf_register_net_hook+0x51/0x160 [..] [<ffffffff8166e561>] nf_register_net_hook+0x51/0x160 [<ffffffff8166eaaf>] nf_register_net_hooks+0x3f/0xa0 [<ffffffff816d6715>] ipt_register_table+0xe5/0x110 [..] This warning is harmless; we copy 'uninitialized' data from the hook ops but it will not be used. Long term the structures keeping run-time data should be disentangled from those only containing config-time data (such as where in the list to insert a hook), but thats -next material. Reported-by: Markus Trippelsdorf <markus@trippelsdorf.de> Suggested-by: Al Viro <viro@ZenIV.linux.org.uk> Signed-off-by: Florian Westphal <fw@strlen.de> Acked-by: Aaron Conole <aconole@bytheb.org> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2016-10-19tcp: do not export sysctl_tcp_low_latencyEric Dumazet
Since commit b2fb4f54ecd4 ("tcp: uninline tcp_prequeue()") we no longer access sysctl_tcp_low_latency from a module. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-19switchdev: Execute bridge ndos only for bridge portsIdo Schimmel
We recently got the following warning after setting up a vlan device on top of an offloaded bridge and executing 'bridge link': WARNING: CPU: 0 PID: 18566 at drivers/net/ethernet/mellanox/mlxsw/spectrum_switchdev.c:81 mlxsw_sp_port_orig_get.part.9+0x55/0x70 [mlxsw_spectrum] [...] CPU: 0 PID: 18566 Comm: bridge Not tainted 4.8.0-rc7 #1 Hardware name: Mellanox Technologies Ltd. Mellanox switch/Mellanox switch, BIOS 4.6.5 05/21/2015 0000000000000286 00000000e64ab94f ffff880406e6f8f0 ffffffff8135eaa3 0000000000000000 0000000000000000 ffff880406e6f930 ffffffff8108c43b 0000005106e6f988 ffff8803df398840 ffff880403c60108 ffff880406e6f990 Call Trace: [<ffffffff8135eaa3>] dump_stack+0x63/0x90 [<ffffffff8108c43b>] __warn+0xcb/0xf0 [<ffffffff8108c56d>] warn_slowpath_null+0x1d/0x20 [<ffffffffa01420d5>] mlxsw_sp_port_orig_get.part.9+0x55/0x70 [mlxsw_spectrum] [<ffffffffa0142195>] mlxsw_sp_port_attr_get+0xa5/0xb0 [mlxsw_spectrum] [<ffffffff816f151f>] switchdev_port_attr_get+0x4f/0x140 [<ffffffff816f15d0>] switchdev_port_attr_get+0x100/0x140 [<ffffffff816f15d0>] switchdev_port_attr_get+0x100/0x140 [<ffffffff816f1d6b>] switchdev_port_bridge_getlink+0x5b/0xc0 [<ffffffff816f2680>] ? switchdev_port_fdb_dump+0x90/0x90 [<ffffffff815f5427>] rtnl_bridge_getlink+0xe7/0x190 [<ffffffff8161a1b2>] netlink_dump+0x122/0x290 [<ffffffff8161b0df>] __netlink_dump_start+0x15f/0x190 [<ffffffff815f5340>] ? rtnl_bridge_dellink+0x230/0x230 [<ffffffff815fab46>] rtnetlink_rcv_msg+0x1a6/0x220 [<ffffffff81208118>] ? __kmalloc_node_track_caller+0x208/0x2c0 [<ffffffff815f5340>] ? rtnl_bridge_dellink+0x230/0x230 [<ffffffff815fa9a0>] ? rtnl_newlink+0x890/0x890 [<ffffffff8161cf54>] netlink_rcv_skb+0xa4/0xc0 [<ffffffff815f56f8>] rtnetlink_rcv+0x28/0x30 [<ffffffff8161c92c>] netlink_unicast+0x18c/0x240 [<ffffffff8161ccdb>] netlink_sendmsg+0x2fb/0x3a0 [<ffffffff815c5a48>] sock_sendmsg+0x38/0x50 [<ffffffff815c6031>] SYSC_sendto+0x101/0x190 [<ffffffff815c7111>] ? __sys_recvmsg+0x51/0x90 [<ffffffff815c6b6e>] SyS_sendto+0xe/0x10 [<ffffffff817017f2>] entry_SYSCALL_64_fastpath+0x1a/0xa4 The problem is that the 8021q module propagates the call to ndo_bridge_getlink() via switchdev ops, but the switch driver doesn't recognize the netdev, as it's not offloaded. While we can ignore calls being made to non-bridge ports inside the driver, a better fix would be to push this check up to the switchdev layer. Note that these ndos can be called for non-bridged netdev, but this only happens in certain PF drivers which don't call the corresponding switchdev functions anyway. Fixes: 99f44bb3527b ("mlxsw: spectrum: Enable L3 interfaces on top of bridge devices") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reported-by: Tamir Winetroub <tamirw@mellanox.com> Tested-by: Tamir Winetroub <tamirw@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-19net: core: Correctly iterate over lower adjacency listIdo Schimmel
Tamir reported the following trace when processing ARP requests received via a vlan device on top of a VLAN-aware bridge: NMI watchdog: BUG: soft lockup - CPU#1 stuck for 22s! [swapper/1:0] [...] CPU: 1 PID: 0 Comm: swapper/1 Tainted: G W 4.8.0-rc7 #1 Hardware name: Mellanox Technologies Ltd. "MSN2100-CB2F"/"SA001017", BIOS 5.6.5 06/07/2016 task: ffff88017edfea40 task.stack: ffff88017ee10000 RIP: 0010:[<ffffffff815dcc73>] [<ffffffff815dcc73>] netdev_all_lower_get_next_rcu+0x33/0x60 [...] Call Trace: <IRQ> [<ffffffffa015de0a>] mlxsw_sp_port_lower_dev_hold+0x5a/0xa0 [mlxsw_spectrum] [<ffffffffa016f1b0>] mlxsw_sp_router_netevent_event+0x80/0x150 [mlxsw_spectrum] [<ffffffff810ad07a>] notifier_call_chain+0x4a/0x70 [<ffffffff810ad13a>] atomic_notifier_call_chain+0x1a/0x20 [<ffffffff815ee77b>] call_netevent_notifiers+0x1b/0x20 [<ffffffff815f2eb6>] neigh_update+0x306/0x740 [<ffffffff815f38ce>] neigh_event_ns+0x4e/0xb0 [<ffffffff8165ea3f>] arp_process+0x66f/0x700 [<ffffffff8170214c>] ? common_interrupt+0x8c/0x8c [<ffffffff8165ec29>] arp_rcv+0x139/0x1d0 [<ffffffff816e505a>] ? vlan_do_receive+0xda/0x320 [<ffffffff815e3794>] __netif_receive_skb_core+0x524/0xab0 [<ffffffff815e6830>] ? dev_queue_xmit+0x10/0x20 [<ffffffffa06d612d>] ? br_forward_finish+0x3d/0xc0 [bridge] [<ffffffffa06e5796>] ? br_handle_vlan+0xf6/0x1b0 [bridge] [<ffffffff815e3d38>] __netif_receive_skb+0x18/0x60 [<ffffffff815e3dc0>] netif_receive_skb_internal+0x40/0xb0 [<ffffffff815e3e4c>] netif_receive_skb+0x1c/0x70 [<ffffffffa06d7856>] br_pass_frame_up+0xc6/0x160 [bridge] [<ffffffffa06d63d7>] ? deliver_clone+0x37/0x50 [bridge] [<ffffffffa06d656c>] ? br_flood+0xcc/0x160 [bridge] [<ffffffffa06d7b14>] br_handle_frame_finish+0x224/0x4f0 [bridge] [<ffffffffa06d7f94>] br_handle_frame+0x174/0x300 [bridge] [<ffffffff815e3599>] __netif_receive_skb_core+0x329/0xab0 [<ffffffff81374815>] ? find_next_bit+0x15/0x20 [<ffffffff8135e802>] ? cpumask_next_and+0x32/0x50 [<ffffffff810c9968>] ? load_balance+0x178/0x9b0 [<ffffffff815e3d38>] __netif_receive_skb+0x18/0x60 [<ffffffff815e3dc0>] netif_receive_skb_internal+0x40/0xb0 [<ffffffff815e3e4c>] netif_receive_skb+0x1c/0x70 [<ffffffffa01544a1>] mlxsw_sp_rx_listener_func+0x61/0xb0 [mlxsw_spectrum] [<ffffffffa005c9f7>] mlxsw_core_skb_receive+0x187/0x200 [mlxsw_core] [<ffffffffa007332a>] mlxsw_pci_cq_tasklet+0x63a/0x9b0 [mlxsw_pci] [<ffffffff81091986>] tasklet_action+0xf6/0x110 [<ffffffff81704556>] __do_softirq+0xf6/0x280 [<ffffffff8109213f>] irq_exit+0xdf/0xf0 [<ffffffff817042b4>] do_IRQ+0x54/0xd0 [<ffffffff8170214c>] common_interrupt+0x8c/0x8c The problem is that netdev_all_lower_get_next_rcu() never advances the iterator, thereby causing the loop over the lower adjacency list to run forever. Fix this by advancing the iterator and avoid the infinite loop. Fixes: 7ce856aaaf13 ("mlxsw: spectrum: Add couple of lower device helper functions") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reported-by: Tamir Winetroub <tamirw@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Acked-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-19flow_dissector: Check skb for VLAN only if skb specified.Eric Garver
Fixes a panic when calling eth_get_headlen(). Noticed on i40e driver. Fixes: d5709f7ab776 ("flow_dissector: For stripped vlan, get vlan info from skb->vlan_tci") Signed-off-by: Eric Garver <e@erig.me> Reviewed-by: Jakub Sitnicki <jkbs@redhat.com> Acked-by: Amir Vadai <amir@vadai.me> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-18soreuseport: do not export reuseport_add_sock()Eric Dumazet
reuseport_add_sock() is not used from a module, no need to export it. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-18bridge: multicast: restore perm router ports on multicast enableNikolay Aleksandrov
Satish reported a problem with the perm multicast router ports not getting reenabled after some series of events, in particular if it happens that the multicast snooping has been disabled and the port goes to disabled state then it will be deleted from the router port list, but if it moves into non-disabled state it will not be re-added because the mcast snooping is still disabled, and enabling snooping later does nothing. Here are the steps to reproduce, setup br0 with snooping enabled and eth1 added as a perm router (multicast_router = 2): 1. $ echo 0 > /sys/class/net/br0/bridge/multicast_snooping 2. $ ip l set eth1 down ^ This step deletes the interface from the router list 3. $ ip l set eth1 up ^ This step does not add it again because mcast snooping is disabled 4. $ echo 1 > /sys/class/net/br0/bridge/multicast_snooping 5. $ bridge -d -s mdb show <empty> At this point we have mcast enabled and eth1 as a perm router (value = 2) but it is not in the router list which is incorrect. After this change: 1. $ echo 0 > /sys/class/net/br0/bridge/multicast_snooping 2. $ ip l set eth1 down ^ This step deletes the interface from the router list 3. $ ip l set eth1 up ^ This step does not add it again because mcast snooping is disabled 4. $ echo 1 > /sys/class/net/br0/bridge/multicast_snooping 5. $ bridge -d -s mdb show router ports on br0: eth1 Note: we can directly do br_multicast_enable_port for all because the querier timer already has checks for the port state and will simply expire if it's in blocking/disabled. See the comment added by commit 9aa66382163e7 ("bridge: multicast: add a comment to br_port_state_selection about blocking state") Fixes: 561f1103a2b7 ("bridge: Add multicast_snooping sysfs toggle") Reported-by: Satish Ashok <sashok@cumulusnetworks.com> Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-18netfilter: nf_tables: avoid uninitialized variable warningArnd Bergmann
The newly added nft_range_eval() function handles the two possible nft range operations, but as the compiler warning points out, any unexpected value would lead to the 'mismatch' variable being used without being initialized: net/netfilter/nft_range.c: In function 'nft_range_eval': net/netfilter/nft_range.c:45:5: error: 'mismatch' may be used uninitialized in this function [-Werror=maybe-uninitialized] This removes the variable in question and instead moves the condition into the switch itself, which is potentially more efficient than adding a bogus 'default' clause as in my first approach, and is nicer than using the 'uninitialized_var' macro. Fixes: 0f3cd9b36977 ("netfilter: nf_tables: add range expression") Link: http://patchwork.ozlabs.org/patch/677114/ Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2016-10-18tcp: Remove unused but set variableTobias Klauser
Remove the unused but set variable icsk in listening_get_next to fix the following GCC warning when building with 'W=1': net/ipv4/tcp_ipv4.c: In function ‘listening_get_next’: net/ipv4/tcp_ipv4.c:1890:31: warning: variable ‘icsk’ set but not used [-Wunused-but-set-variable] Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-18ipv4: Remove unused but set variableTobias Klauser
Remove the unused but set variable dev in ip_do_fragment to fix the following GCC warning when building with 'W=1': net/ipv4/ip_output.c: In function ‘ip_do_fragment’: net/ipv4/ip_output.c:541:21: warning: variable ‘dev’ set but not used [-Wunused-but-set-variable] Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-18net/hsr: Remove unused but set variableTobias Klauser
Remove the unused but set variable master_dev in check_local_dest to fix the following GCC warning when building with 'W=1': net/hsr/hsr_forward.c: In function ‘check_local_dest’: net/hsr/hsr_forward.c:303:21: warning: variable ‘master_dev’ set but not used [-Wunused-but-set-variable] Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-18Merge tag 'mac80211-for-davem-2016-10-18' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211 Johannes Berg says: ==================== This is relatively small, mostly to get the SG/crypto from stack removal fix that crashes things when VMAP stack is used in conjunction with software crypto. Aside from that, we have: * a fix for AP_VLAN usage with the nl80211 frame command * two fixes (and two preparation patches) for A-MSDU, one to discard group-addressed (multicast) and unexpected 4-address A-MSDUs, the other to validate A-MSDU inner MAC addresses properly to prevent controlled port bypass ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-17netfilter: nft_range: validate operation netlink attributePablo Neira Ayuso
Use nft_parse_u32_check() to make sure we don't get a value over the unsigned 8-bit integer. Moreover, make sure this value doesn't go over the two supported range comparison modes. Fixes: 9286c2eb1fda ("netfilter: nft_range: validate operation netlink attribute") Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2016-10-17netfilter: nft_exthdr: fix error handling in nft_exthdr_init()Dan Carpenter
"err" needs to be signed for the error handling to work. Fixes: 36b701fae12a ('netfilter: nf_tables: validate maximum value of u32 netlink attributes') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2016-10-17netfilter: nf_tables: underflow in nft_parse_u32_check()Dan Carpenter
We don't want to allow negatives here. Fixes: 36b701fae12a ('netfilter: nf_tables: validate maximum value of u32 netlink attributes') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2016-10-17netfilter: nft_hash: add missing NFTA_HASH_OFFSET's nla_policyLiping Zhang
Missing the nla_policy description will also miss the validation check in kernel. Fixes: 70ca767ea1b2 ("netfilter: nft_hash: Add hash offset value") Signed-off-by: Liping Zhang <liping.zhang@spreadtrum.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2016-10-17netfilter: xt_ipcomp: add "ip[6]t_ipcomp" module alias nameLiping Zhang
Otherwise, user cannot add related rules if xt_ipcomp.ko is not loaded: # iptables -A OUTPUT -p 108 -m ipcomp --ipcompspi 1 iptables: No chain/target/match by that name. Signed-off-by: Liping Zhang <liping.zhang@spreadtrum.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2016-10-17netfilter: xt_NFLOG: fix unexpected truncated packetLiping Zhang
Justin and Chris spotted that iptables NFLOG target was broken when they upgraded the kernel to 4.8: "ulogd-2.0.5- IPs are no longer logged" or "results in segfaults in ulogd-2.0.5". Because "struct nf_loginfo li;" is a local variable, and flags will be filled with garbage value, not inited to zero. So if it contains 0x1, packets will not be logged to the userspace anymore. Fixes: 7643507fe8b5 ("netfilter: xt_NFLOG: nflog-range does not truncate packets") Reported-by: Justin Piszcz <jpiszcz@lucidpixels.com> Reported-by: Chris Caputo <ccaputo@alt.net> Tested-by: Chris Caputo <ccaputo@alt.net> Signed-off-by: Liping Zhang <liping.zhang@spreadtrum.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2016-10-17netfilter: nft_dynset: fix element timeout for HZ != 1000Anders K. Pedersen
With HZ=100 element timeout in dynamic sets (i.e. flow tables) is 10 times higher than configured. Add proper conversion to/from jiffies, when interacting with userspace. I tested this on Linux 4.8.1, and it applies cleanly to current nf and nf-next trees. Fixes: 22fe54d5fefc ("netfilter: nf_tables: add support for dynamic set updates") Signed-off-by: Anders K. Pedersen <akp@cohaesio.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2016-10-17netfilter: xt_hashlimit: Add missing ULL suffixes for 64-bit constantsGeert Uytterhoeven
On 32-bit (e.g. with m68k-linux-gnu-gcc-4.1): net/netfilter/xt_hashlimit.c: In function ‘user2credits’: net/netfilter/xt_hashlimit.c:476: warning: integer constant is too large for ‘long’ type ... net/netfilter/xt_hashlimit.c:478: warning: integer constant is too large for ‘long’ type ... net/netfilter/xt_hashlimit.c:480: warning: integer constant is too large for ‘long’ type ... net/netfilter/xt_hashlimit.c: In function ‘rateinfo_recalc’: net/netfilter/xt_hashlimit.c:513: warning: integer constant is too large for ‘long’ type Fixes: 11d5f15723c9f39d ("netfilter: xt_hashlimit: Create revision 2 to support higher pps rates") Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Vishwanath Pai <vpai@akamai.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2016-10-17net: pktgen: remove rcu locking in pktgen_change_name()Eric Dumazet
After Jesper commit back in linux-3.18, we trigger a lockdep splat in proc_create_data() while allocating memory from pktgen_change_name(). This patch converts t->if_lock to a mutex, since it is now only used from control path, and adds proper locking to pktgen_change_name() 1) pktgen_thread_lock to protect the outer loop (iterating threads) 2) t->if_lock to protect the inner loop (iterating devices) Note that before Jesper patch, pktgen_change_name() was lacking proper protection, but lockdep was not able to detect the problem. Fixes: 8788370a1d4b ("pktgen: RCU-ify "if_list" to remove lock in next_to_run()") Reported-by: John Sperbeck <jsperbeck@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-17net: Require exact match for TCP socket lookups if dif is l3mdevDavid Ahern
Currently, socket lookups for l3mdev (vrf) use cases can match a socket that is bound to a port but not a device (ie., a global socket). If the sysctl tcp_l3mdev_accept is not set this leads to ack packets going out based on the main table even though the packet came in from an L3 domain. The end result is that the connection does not establish creating confusion for users since the service is running and a socket shows in ss output. Fix by requiring an exact dif to sk_bound_dev_if match if the skb came through an interface enslaved to an l3mdev device and the tcp_l3mdev_accept is not set. skb's through an l3mdev interface are marked by setting a flag in inet{6}_skb_parm. The IPv6 variant is already set; this patch adds the flag for IPv4. Using an skb flag avoids a device lookup on the dif. The flag is set in the VRF driver using the IP{6}CB macros. For IPv4, the inet_skb_parm struct is moved in the cb per commit 971f10eca186, so the match function in the TCP stack needs to use TCP_SKB_CB. For IPv6, the move is done after the socket lookup, so IP6CB is used. The flags field in inet_skb_parm struct needs to be increased to add another flag. There is currently a 1-byte hole following the flags, so it can be expanded to u16 without increasing the size of the struct. Fixes: 193125dbd8eb ("net: Introduce VRF device driver") Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-17mac80211: move struct aead_req off the stackArd Biesheuvel
Some crypto implementations (such as the generic CCM wrapper in crypto/) use scatterlists to map fields of private data in their struct aead_req. This means these data structures cannot live in the vmalloc area, which means that they cannot live on the stack (with CONFIG_VMAP_STACK.) This currently occurs only with the generic software implementation, but the private data and usage is implementation specific, so move the whole data structures off the stack into heap by allocating every time we need to use them. In addition, take care not to put any of our own stack allocations into scatterlists. This involves reserving some extra room when allocating the aead_request structures, and referring to those allocations in the scatter- lists (while copying the data from the stack before the crypto operation) Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-10-14IPv6: fix DESYNC_FACTORJiri Bohac
The IPv6 temporary address generation uses a variable called DESYNC_FACTOR to prevent hosts updating the addresses at the same time. Quoting RFC 4941: ... The value DESYNC_FACTOR is a random value (different for each client) that ensures that clients don't synchronize with each other and generate new addresses at exactly the same time ... DESYNC_FACTOR is defined as: DESYNC_FACTOR -- A random value within the range 0 - MAX_DESYNC_FACTOR. It is computed once at system start (rather than each time it is used) and must never be greater than (TEMP_VALID_LIFETIME - REGEN_ADVANCE). First, I believe the RFC has a typo in it and meant to say: "and must never be greater than (TEMP_PREFERRED_LIFETIME - REGEN_ADVANCE)" The reason is that at various places in the RFC, DESYNC_FACTOR is used in a calculation like (TEMP_PREFERRED_LIFETIME - DESYNC_FACTOR) or (TEMP_PREFERRED_LIFETIME - REGEN_ADVANCE - DESYNC_FACTOR). It needs to be smaller than (TEMP_PREFERRED_LIFETIME - REGEN_ADVANCE) for the result of these calculations to be larger than zero. It's never used in a calculation together with TEMP_VALID_LIFETIME. I already submitted an errata to the rfc-editor: https://www.rfc-editor.org/errata_search.php?rfc=4941 The Linux implementation of DESYNC_FACTOR is very wrong: max_desync_factor is used in places DESYNC_FACTOR should be used. max_desync_factor is initialized to the RFC-recommended value for MAX_DESYNC_FACTOR (600) but the whole point is to get a _random_ value. And nothing ensures that the value used is not greater than (TEMP_PREFERRED_LIFETIME - REGEN_ADVANCE), which leads to underflows. The effect can easily be observed when setting the temp_prefered_lft sysctl e.g. to 60. The preferred lifetime of the temporary addresses will be bogus. TEMP_PREFERRED_LIFETIME and REGEN_ADVANCE are not constants and can be influenced by these three sysctls: regen_max_retry, dad_transmits and temp_prefered_lft. Thus, the upper bound for desync_factor needs to be re-calculated each time a new address is generated and if desync_factor is larger than the new upper bound, a new random value needs to be re-generated. And since we already have max_desync_factor configurable per interface, we also need to calculate and store desync_factor per interface. Signed-off-by: Jiri Bohac <jbohac@suse.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-14IPv6: Drop the temporary address regen_timerJiri Bohac
The randomized interface identifier (rndid) was periodically updated from the regen_timer timer. Simplify the code by updating the rndid only when needed by ipv6_try_regen_rndid(). This makes the follow-up DESYNC_FACTOR fix much simpler. Also it fixes a reference counting error in this error path, where an in6_dev_put was missing: err = addrconf_sysctl_register(ndev); if (err) { ipv6_mc_destroy_dev(ndev); - del_timer(&ndev->regen_timer); snmp6_unregister_dev(ndev); goto err_release; Signed-off-by: Jiri Bohac <jbohac@suse.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-14Merge tag 'rxrpc-rewrite-20161013' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs David Howells says: ==================== rxrpc: Fixes This set of patches contains a bunch of fixes: (1) Fix use of kunmap() after change from kunmap_atomic() within AFS. (2) Don't use of ERR_PTR() with an always zero value. (3) Check the right error when using ip6_route_output(). (4) Be consistent about whether call->operation_ID is BE or CPU-E within AFS. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-14ipv6: correctly add local routes when lo goes upNicolas Dichtel
The goal of the patch is to fix this scenario: ip link add dummy1 type dummy ip link set dummy1 up ip link set lo down ; ip link set lo up After that sequence, the local route to the link layer address of dummy1 is not there anymore. When the loopback is set down, all local routes are deleted by addrconf_ifdown()/rt6_ifdown(). At this time, the rt6_info entry still exists, because the corresponding idev has a reference on it. After the rcu grace period, dst_rcu_free() is called, and thus ___dst_free(), which will set obsolete to DST_OBSOLETE_DEAD. In this case, init_loopback() is called before dst_rcu_free(), thus obsolete is still sets to something <= 0. So, the function doesn't add the route again. To avoid that race, let's check the rt6 refcnt instead. Fixes: 25fb6ca4ed9c ("net IPv6 : Fix broken IPv6 routing table after loopback down-up") Fixes: a881ae1f625c ("ipv6: don't call addrconf_dst_alloc again when enable lo") Fixes: 33d99113b110 ("ipv6: reallocate addrconf router for ipv6 address when lo device up") Reported-by: Francesco Santoro <francesco.santoro@6wind.com> Reported-by: Samuel Gauthier <samuel.gauthier@6wind.com> CC: Balakumaran Kannan <Balakumaran.Kannan@ap.sony.com> CC: Maruthi Thotad <Maruthi.Thotad@ap.sony.com> CC: Sabrina Dubroca <sd@queasysnail.net> CC: Hannes Frederic Sowa <hannes@stressinduktion.org> CC: Weilong Chen <chenweilong@huawei.com> CC: Gao feng <gaofeng@cn.fujitsu.com> Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-14ip6_tunnel: fix ip6_tnl_lookupVadim Fedorenko
The commit ea3dc9601bda ("ip6_tunnel: Add support for wildcard tunnel endpoints.") introduces support for wildcards in tunnels endpoints, but in some rare circumstances ip6_tnl_lookup selects wrong tunnel interface relying only on source or destination address of the packet and not checking presence of wildcard in tunnels endpoints. Later in ip6_tnl_rcv this packets can be dicarded because of difference in ipproto even if fallback device have proper ipproto configuration. This patch adds checks of wildcard endpoint in tunnel avoiding such behavior Fixes: ea3dc9601bda ("ip6_tunnel: Add support for wildcard tunnel endpoints.") Signed-off-by: Vadim Fedorenko <junk@yandex-team.ru> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-13Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking fixes from David Miller: 1) Fix various build warnings in tlan/qed/xen-netback drivers, from Arnd Bergmann. 2) Propagate proper error code in strparser's strp_recv(), from Geert Uytterhoeven. 3) Fix accidental broadcast of RTM_GETTFILTER responses, from Eric Dumazret. 4) Need to use list_for_each_entry_safe() in qed driver, from Wei Yongjun. 5) Openvswitch 802.1AD bug fixes from Jiri Benc. 6) Cure BUILD_BUG_ON() in mlx5 driver, from Tom Herbert. 7) Fix UDP ipv6 checksumming in netvsc driver, from Stephen Hemminger. 8) stmmac driver fixes from Giuseppe CAVALLARO. 9) Fix access to mangled IP6CB in tcp, from Eric Dumazet. 10) Fix info leaks in tipc and rtnetlink, from Dan Carpenter. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (27 commits) net: bridge: add the multicast_flood flag attribute to brport_attrs net: axienet: Remove unused parameter from __axienet_device_reset liquidio: CN23XX: fix a loop timeout net: rtnl: info leak in rtnl_fill_vfinfo() tipc: info leak in __tipc_nl_add_udp_addr() net: ipv4: Do not drop to make_route if oif is l3mdev net: phy: Trigger state machine on state change and not polling. ipv6: tcp: restore IP6CB for pktoptions skbs netvsc: Remove mistaken udp.h inclusion. xen-netback: fix type mismatch warning stmmac: fix error check when init ptp stmmac: fix ptp init for gmac4 qed: fix old-style function definition netvsc: fix checksum on UDP IPV6 net_sched: reorder pernet ops and act ops registrations xen-netback: fix guest Rx stall detection (after guest Rx refactor) drivers/ptp: Fix kernel memory disclosure net/mlx5: Add MLX5_ARRAY_SET64 to fix BUILD_BUG_ON qmi_wwan: add support for Quectel EC21 and EC25 openvswitch: add NETIF_F_HW_VLAN_STAG_TX to internal dev ...
2016-10-13Merge tag 'nfs-for-4.9-1' of git://git.linux-nfs.org/projects/anna/linux-nfsLinus Torvalds
Pull NFS client updates from Anna Schumaker: "Highlights include: Stable bugfixes: - sunrpc: fix writ espace race causing stalls - NFS: Fix inode corruption in nfs_prime_dcache() - NFSv4: Don't report revoked delegations as valid in nfs_have_delegation() - NFSv4: nfs4_copy_delegation_stateid() must fail if the delegation is invalid - NFSv4: Open state recovery must account for file permission changes - NFSv4.2: Fix a reference leak in nfs42_proc_layoutstats_generic Features: - Add support for tracking multiple layout types with an ordered list - Add support for using multiple backchannel threads on the client - Add support for pNFS file layout session trunking - Delay xprtrdma use of DMA API (for device driver removal) - Add support for xprtrdma remote invalidation - Add support for larger xprtrdma inline thresholds - Use a scatter/gather list for sending xprtrdma RPC calls - Add support for the CB_NOTIFY_LOCK callback - Improve hashing sunrpc auth_creds by using both uid and gid Bugfixes: - Fix xprtrdma use of DMA API - Validate filenames before adding to the dcache - Fix corruption of xdr->nwords in xdr_copy_to_scratch - Fix setting buffer length in xdr_set_next_buffer() - Don't deadlock the state manager on the SEQUENCE status flags - Various delegation and stateid related fixes - Retry operations if an interrupted slot receives EREMOTEIO - Make nfs boot time y2038 safe" * tag 'nfs-for-4.9-1' of git://git.linux-nfs.org/projects/anna/linux-nfs: (100 commits) NFSv4.2: Fix a reference leak in nfs42_proc_layoutstats_generic fs: nfs: Make nfs boot time y2038 safe sunrpc: replace generic auth_cred hash with auth-specific function sunrpc: add RPCSEC_GSS hash_cred() function sunrpc: add auth_unix hash_cred() function sunrpc: add generic_auth hash_cred() function sunrpc: add hash_cred() function to rpc_authops struct Retry operation on EREMOTEIO on an interrupted slot pNFS: Fix atime updates on pNFS clients sunrpc: queue work on system_power_efficient_wq NFSv4.1: Even if the stateid is OK, we may need to recover the open modes NFSv4: If recovery failed for a specific open stateid, then don't retry NFSv4: Fix retry issues with nfs41_test/free_stateid NFSv4: Open state recovery must account for file permission changes NFSv4: Mark the lock and open stateids as invalid after freeing them NFSv4: Don't test open_stateid unless it is set NFSv4: nfs4_do_handle_exception() handle revoke/expiry of a single stateid NFS: Always call nfs_inode_find_state_and_recover() when revoking a delegation NFSv4: Fix a race when updating an open_stateid NFSv4: Fix a race in nfs_inode_reclaim_delegation() ...
generated by cgit v1.2.3 (git 2.25.1) at 2024-10-04 01:31:50 +0000