summaryrefslogtreecommitdiff
path: root/net
AgeCommit message (Collapse)Author
2020-09-20net: dsa: rename dsa_slave_upper_vlan_check to something more suggestiveVladimir Oltean
We'll be adding a new check in the PRECHANGEUPPER notifier, where we'll need to check some VLAN uppers. It is hard to do that when there is already a function named dsa_slave_upper_vlan_check. So rename this one. Not to mention that this function probably shouldn't have started with "dsa_slave_" in the first place, since the struct net_device argument isn't a DSA slave, but an 8021q upper of one. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-20net: dsa: deny enslaving 802.1Q upper to VLAN-aware bridge from PRECHANGEUPPERVladimir Oltean
There doesn't seem to be any strong technical reason for doing it this way, but we'll be adding more checks for invalid upper device configurations, and it will be easier to have them all grouped under PRECHANGEUPPER. Tested that it still works: ip link set br0 type bridge vlan_filtering 1 ip link add link swp2 name swp2.100 type vlan id 100 ip link set swp2.100 master br0 [ 20.321312] br0: port 5(swp2.100) entered blocking state [ 20.326711] br0: port 5(swp2.100) entered disabled state Error: dsa_core: Cannot enslave VLAN device into VLAN aware bridge. [ 20.346549] br0: port 5(swp2.100) entered blocking state [ 20.351957] br0: port 5(swp2.100) entered disabled state Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-20net: remove unnecessary NULL checking in napi_consume_skb()Yunsheng Lin
When budget is non-zero, skb_unref() has already handled the NULL checking. When budget is zero, the dev_consume_skb_any() has handled NULL checking in __dev_kfree_skb_irq(), or dev_kfree_skb() which also ultimately call skb_unref(). So remove the unnecessary checking in napi_consume_skb(). Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-20net: sctp: Fix IPv6 ancestor_size calc in sctp_copy_descendantHenry Ptasinski
When calculating ancestor_size with IPv6 enabled, simply using sizeof(struct ipv6_pinfo) doesn't account for extra bytes needed for alignment in the struct sctp6_sock. On x86, there aren't any extra bytes, but on ARM the ipv6_pinfo structure is aligned on an 8-byte boundary so there were 4 pad bytes that were omitted from the ancestor_size calculation. This would lead to corruption of the pd_lobby pointers, causing an oops when trying to free the sctp structure on socket close. Fixes: 636d25d557d1 ("sctp: not copy sctp_sock pd_lobby in sctp_copy_descendant") Signed-off-by: Henry Ptasinski <hptasinski@google.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-19ethtool: Add 100base-FX link mode entriesDan Murphy
Add entries for the 100base-FX full and half duplex supported modes. $ ethtool eth0 Supported ports: [ FIBRE ] Supported link modes: 100baseFX/Half 100baseFX/Full Supported pause frame use: Symmetric Receive-only Supports auto-negotiation: No Supported FEC modes: Not reported Advertised link modes: 100baseFX/Half 100baseFX/Full Advertised pause frame use: No Advertised auto-negotiation: No Advertised FEC modes: Not reported Speed: 100Mb/s Duplex: Full Auto-negotiation: off Port: MII PHYAD: 1 Transceiver: external Supports Wake-on: gs Wake-on: d SecureOn password: 00:00:00:00:00:00 Current message level: 0x00000000 (0) Link detected: yes Signed-off-by: Dan Murphy <dmurphy@ti.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-19net/packet: Fix a comment about network_headerXie He
skb->nh.raw has been renamed as skb->network_header in 2007, in commit b0e380b1d8a8 ("[SK_BUFF]: unions of just one member don't get anything done, kill them") So here we change it to the new name. Cc: Willem de Bruijn <willemdebruijn.kernel@gmail.com> Signed-off-by: Xie He <xie.he.0141@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-18net: dsa: wire up devlink info getAndrew Lunn
Allow the DSA drivers to implement the devlink call to get info info, e.g. driver name, firmware version, ASIC ID, etc. v2: Combine declaration and the assignment on a single line. Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-18net: dsa: Add devlink regions support to DSAAndrew Lunn
Allow DSA drivers to make use of devlink regions, via simple wrappers. Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-18net: dsa: Add helper to convert from devlink to dsAndrew Lunn
Given a devlink instance, return the dsa switch it is associated to. Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-18net: devlink: region: Pass the region ops to the snapshot functionAndrew Lunn
Pass the region to be snapshotted to the function performing the snapshot. This allows one function to operate on numerous regions. v4: Add missing kerneldoc for ICE Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-18net: ipv6: fix kconfig dependency warning for IPV6_SEG6_HMACNecip Fazil Yildiran
When IPV6_SEG6_HMAC is enabled and CRYPTO is disabled, it results in the following Kbuild warning: WARNING: unmet direct dependencies detected for CRYPTO_HMAC Depends on [n]: CRYPTO [=n] Selected by [y]: - IPV6_SEG6_HMAC [=y] && NET [=y] && INET [=y] && IPV6 [=y] WARNING: unmet direct dependencies detected for CRYPTO_SHA1 Depends on [n]: CRYPTO [=n] Selected by [y]: - IPV6_SEG6_HMAC [=y] && NET [=y] && INET [=y] && IPV6 [=y] WARNING: unmet direct dependencies detected for CRYPTO_SHA256 Depends on [n]: CRYPTO [=n] Selected by [y]: - IPV6_SEG6_HMAC [=y] && NET [=y] && INET [=y] && IPV6 [=y] The reason is that IPV6_SEG6_HMAC selects CRYPTO_HMAC, CRYPTO_SHA1, and CRYPTO_SHA256 without depending on or selecting CRYPTO while those configs are subordinate to CRYPTO. Honor the kconfig menu hierarchy to remove kconfig dependency warnings. Fixes: bf355b8d2c30 ("ipv6: sr: add core files for SR HMAC support") Signed-off-by: Necip Fazil Yildiran <fazilyildiran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-18Merge tag 'batadv-net-for-davem-20200918' of git://git.open-mesh.org/linux-mergeDavid S. Miller
Simon Wunderlich says: ==================== Here are some batman-adv bugfixes: - fix wrong type use in backbone_gw hash, by Linus Luessing - disable TT re-routing for multicast packets, by Linus Luessing - Add missing include for in_interrupt(), by Sven Eckelmann - fix BLA/multicast issues for packets sent via unicast, by Linus Luessing (3 patches) ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-18net: tipc: Supply missing udp_media.h include fileWang Hai
If the header file containing a function's prototype isn't included by the sourcefile containing the associated function, the build system complains of missing prototypes. Fixes the following W=1 kernel build warning(s): net/tipc/udp_media.c:446:5: warning: no previous prototype for ‘tipc_udp_nl_dump_remoteip’ [-Wmissing-prototypes] net/tipc/udp_media.c:532:5: warning: no previous prototype for ‘tipc_udp_nl_add_bearer_data’ [-Wmissing-prototypes] net/tipc/udp_media.c:614:5: warning: no previous prototype for ‘tipc_udp_nl_bearer_add’ [-Wmissing-prototypes] Signed-off-by: Wang Hai <wanghai38@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-18tipc: Remove unused macro CF_SERVERYueHaibing
It is no used any more, so can remove it. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-18l2tp: fix up inconsistent rx/tx statisticsTom Parkin
Historically L2TP core statistics count the L2TP header in the per-session and per-tunnel byte counts tracked for transmission and receipt. Now that l2tp_xmit_skb updates tx stats, it is necessary for l2tp_xmit_core to pass out the length of the transmitted packet so that the statistics can be updated correctly. Signed-off-by: Tom Parkin <tparkin@katalix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-18net: openswitch: reuse the helper variable to improve the code readablityZeng Tao
In the function ovs_ct_limit_exit, there is already a helper vaibale which could be reused to improve the readability, so i fix it in this patch. Signed-off-by: Zeng Tao <prime.zeng@hisilicon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-18net: bridge: delete duplicated wordsRandy Dunlap
Drop repeated words in net/bridge/. Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Roopa Prabhu <roopa@nvidia.com> Cc: Nikolay Aleksandrov <nikolay@nvidia.com> Cc: bridge@lists.linux-foundation.org Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-18net: atm: delete duplicated wordsRandy Dunlap
Drop repeated words in net/atm/. Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Chas Williams <3chas3@gmail.com> Cc: linux-atm-general@lists.sourceforge.net Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-18net: tipc: delete duplicated wordsRandy Dunlap
Drop repeated words in net/tipc/. Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Jon Maloy <jmaloy@redhat.com> Cc: Ying Xue <ying.xue@windriver.com> Cc: tipc-discussion@lists.sourceforge.net Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-18net: bluetooth: delete duplicated wordsRandy Dunlap
Drop repeated words in net/bluetooth/. Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru> Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-18net: ipv6: delete duplicated wordsRandy Dunlap
Drop repeated words in net/ipv6/. Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-18net: rds: delete duplicated wordsRandy Dunlap
Drop repeated words in net/rds/. Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Santosh Shilimkar <santosh.shilimkar@oracle.com> Cc: linux-rdma@vger.kernel.org Cc: rds-devel@oss.oracle.com Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-18net: core: delete duplicated wordsRandy Dunlap
Drop repeated words in net/core/. Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-18tipc: add automatic rekeying for encryption keyTuong Lien
Rekeying is required for security since a key is less secure when using for a long time. Also, key will be detached when its nonce value (or seqno ...) is exhausted. We now make the rekeying process automatic and configurable by user. Basically, TIPC will at a specific interval generate a new key by using the kernel 'Random Number Generator' cipher, then attach it as the node TX key and securely distribute to others in the cluster as RX keys (- the key exchange). The automatic key switching will then take over, and make the new key active shortly. Afterwards, the traffic from this node will be encrypted with the new session key. The same can happen in peer nodes but not necessarily at the same time. For simplicity, the automatically generated key will be initiated as a per node key. It is not too hard to also support a cluster key rekeying (e.g. a given node will generate a unique cluster key and update to the others in the cluster...), but that doesn't bring much benefit, while a per-node key is even more secure. We also enable user to force a rekeying or change the rekeying interval via netlink, the new 'set key' command option: 'TIPC_NLA_NODE_REKEYING' is added for these purposes as follows: - A value >= 1 will be set as the rekeying interval (in minutes); - A value of 0 will disable the rekeying; - A value of 'TIPC_REKEYING_NOW' (~0) will force an immediate rekeying; The default rekeying interval is (60 * 24) minutes i.e. done every day. There isn't any restriction for the value but user shouldn't set it too small or too large which results in an "ineffective" rekeying (thats ok for testing though). Acked-by: Jon Maloy <jmaloy@redhat.com> Signed-off-by: Tuong Lien <tuong.t.lien@dektech.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-18tipc: add automatic session key exchangeTuong Lien
With support from the master key option in the previous commit, it becomes easy to make frequent updates/exchanges of session keys between authenticated cluster nodes. Basically, there are two situations where the key exchange will take in place: - When a new node joins the cluster (with the master key), it will need to get its peer's TX key, so that be able to decrypt further messages from that peer. - When a new session key is generated (by either user manual setting or later automatic rekeying feature), the key will be distributed to all peer nodes in the cluster. A key to be exchanged is encapsulated in the data part of a 'MSG_CRYPTO /KEY_DISTR_MSG' TIPC v2 message, then xmit-ed as usual and encrypted by using the master key before sending out. Upon receipt of the message it will be decrypted in the same way as regular messages, then attached as the sender's RX key in the receiver node. In this way, the key exchange is reliable by the link layer, as well as security, integrity and authenticity by the crypto layer. Also, the forward security will be easily achieved by user changing the master key actively but this should not be required very frequently. The key exchange feature is independent on the presence of a master key Note however that the master key still is needed for new nodes to be able to join the cluster. It is also optional, and can be turned off/on via the sysfs: 'net/tipc/key_exchange_enabled' [default 1: enabled]. Backward compatibility is guaranteed because for nodes that do not have master key support, key exchange using master key ie. tx_key = 0 if any will be shortly discarded at the message validation step. In other words, the key exchange feature will be automatically disabled to those nodes. v2: fix the "implicit declaration of function 'tipc_crypto_key_flush'" error in node.c. The function only exists when built with the TIPC "CONFIG_TIPC_CRYPTO" option. v3: use 'info->extack' for a message emitted due to netlink operations instead (- David's comment). Reported-by: kernel test robot <lkp@intel.com> Acked-by: Jon Maloy <jmaloy@redhat.com> Signed-off-by: Tuong Lien <tuong.t.lien@dektech.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-18tipc: introduce encryption master keyTuong Lien
In addition to the supported cluster & per-node encryption keys for the en/decryption of TIPC messages, we now introduce one option for user to set a cluster key as 'master key', which is simply a symmetric key like the former but has a longer life cycle. It has two purposes: - Authentication of new member nodes in the cluster. New nodes, having no knowledge of current session keys in the cluster will still be able to join the cluster as long as they know the master key. This is because all neighbor discovery (LINK_CONFIG) messages must be encrypted with this key. - Encryption of session encryption keys during automatic exchange and update of those.This is a feature we will introduce in a later commit in this series. We insert the new key into the currently unused slot 0 in the key array and start using it immediately once the user has set it. After joining, a node only knowing the master key should be fully communicable to existing nodes in the cluster, although those nodes may have their own session keys activated (i.e. not the master one). To support this, we define a 'grace period', starting from the time a node itself reports having no RX keys, so the existing nodes will use the master key for encryption instead. The grace period can be extended but will automatically stop after e.g. 5 seconds without a new report. This is also the basis for later key exchanging feature as the new node will be impossible to decrypt anything without the support from master key. For user to set a master key, we define a new netlink flag - 'TIPC_NLA_NODE_KEY_MASTER', so it can be added to the current 'set key' netlink command to specify the setting key to be a master key. Above all, the traditional cluster/per-node key mechanism is guaranteed to work when user comes not to use this master key option. This is also compatible to legacy nodes without the feature supported. Even this master key can be updated without any interruption of cluster connectivity but is so is needed, this has to be coordinated and set by the user. Acked-by: Jon Maloy <jmaloy@redhat.com> Signed-off-by: Tuong Lien <tuong.t.lien@dektech.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-18tipc: optimize key switching time and logicTuong Lien
We reduce the lasting time for a pending TX key to be active as well as for a passive RX key to be freed which generally helps speed up the key switching. It is not expected to be too fast but should not be too slow either. Also the key handling logic is simplified that a pending RX key will be removed automatically if it is found not working after a number of times; the probing for a pending TX key is now carried on a specific message user ('LINK_PROTOCOL' or 'LINK_CONFIG') which is more efficient than using a timer on broadcast messages, the timer is reserved for use later as needed. The kernel logs or 'pr***()' are now made as clear as possible to user. Some prints are added, removed or changed to the debug-level. The 'TIPC_CRYPTO_DEBUG' definition is removed, and the 'pr_debug()' is used instead which will be much helpful in runtime. Besides we also optimize the code in some other places as a preparation for later commits. v2: silent more kernel logs, also use 'info->extack' for a message emitted due to netlink operations instead (- David's comments). Acked-by: Jon Maloy <jmaloy@redhat.com> Signed-off-by: Tuong Lien <tuong.t.lien@dektech.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-18devlink: collect flash notify params into a structShannon Nelson
The dev flash status notify function parameter lists are getting rather long, so add a struct to be filled and passed rather than continuously changing the function signatures. Signed-off-by: Shannon Nelson <snelson@pensando.io> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-18devlink: add timeout information to status_notifyShannon Nelson
Add a timeout element to the DEVLINK_CMD_FLASH_UPDATE_STATUS netlink message for use by a userland utility to show that a particular firmware flash activity may take a long but bounded time to finish. Also add a handy helper for drivers to make use of the new timeout value. UI usage hints: - if non-zero, add timeout display to the end of the status line [component] status_msg ( Xm Ys : Am Bs ) using the timeout value for Am Bs and updating the Xm Ys every second - if the timeout expires while awaiting the next update, display something like [component] status_msg ( timeout reached : Am Bs ) - if new status notify messages are received, remove the timeout and start over Signed-off-by: Shannon Nelson <snelson@pensando.io> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-18net: mscc: ocelot: add locking for the port TX timestamp IDVladimir Oltean
The ocelot_port->ts_id is used to: (a) populate skb->cb[0] for matching the TX timestamp in the PTP IRQ with an skb. (b) populate the REW_OP from the injection header of the ongoing skb. Only then is ocelot_port->ts_id incremented. This is a problem because, at least theoretically, another timestampable skb might use the same ocelot_port->ts_id before that is incremented. Normally all transmit calls are serialized by the netdev transmit spinlock, but in this case, ocelot_port_add_txtstamp_skb() is also called by DSA, which has started declaring the NETIF_F_LLTX feature since commit 2b86cb829976 ("net: dsa: declare lockless TX feature for slave ports"). So the logic of using and incrementing the timestamp id should be atomic per port. The solution is to use the global ocelot_port->ts_id only while protected by the associated ocelot_port->ts_id_lock. That's where we populate skb->cb[0]. Note that for ocelot, ocelot_port_add_txtstamp_skb is called for the actual skb, but for felix, it is called for the skb's clone. That is something which will also be changed in the future. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Tested-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-18net: use exponential backoff in netdev_wait_allrefsFrancesco Ruggeri
The combination of aca_free_rcu, introduced in commit 2384d02520ff ("net/ipv6: Add anycast addresses to a global hashtable"), and fib6_info_destroy_rcu, introduced in commit 9b0a8da8c4c6 ("net/ipv6: respect rcu grace period before freeing fib6_info"), can result in an extra rcu grace period being needed when deleting an interface, with the result that netdev_wait_allrefs ends up hitting the msleep(250), which is considerably longer than the required grace period. This can result in long delays when deleting a large number of interfaces, and it can be observed with this script: ns=dummy-ns NIFS=100 ip netns add $ns ip netns exec $ns ip link set lo up ip netns exec $ns sysctl net.ipv6.conf.default.disable_ipv6=0 ip netns exec $ns sysctl net.ipv6.conf.default.forwarding=1 for ((i=0; i<$NIFS; i++)) do if=eth$i ip netns exec $ns ip link add $if type dummy ip netns exec $ns ip link set $if up ip netns exec $ns ip -6 addr add 2021:$i::1/120 dev $if done for ((i=0; i<$NIFS; i++)) do if=eth$i ip netns exec $ns ip link del $if done ip netns del $ns Instead of using a fixed msleep(250), this patch tries an extra rcu_barrier() followed by an exponential backoff. Time with this patch on a 5.4 kernel: real 0m7.704s user 0m0.385s sys 0m1.230s Time without this patch: real 0m31.522s user 0m0.438s sys 0m1.156s v2: use exponential backoff instead of trying to wake up netdev_wait_allrefs. v3: preserve reverse christmas tree ordering of local variables v4: try an extra rcu_barrier before the backoff, plus some cosmetic changes. Signed-off-by: Francesco Ruggeri <fruggeri@arista.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-18mac80211: Unsolicited broadcast probe response supportAloka Dixit
This patch adds mac80211 support to configure unsolicited broadcast probe response transmission for in-band discovery in 6GHz. Changes include functions to store and retrieve probe response template, and packet interval (0 - 20 TUs). Setting interval to 0 disables the unsolicited broadcast probe response transmission. Signed-off-by: Aloka Dixit <alokad@codeaurora.org> Link: https://lore.kernel.org/r/010101747a946b35-ad25858a-1f1f-48df-909e-dc7bf26d9169-000000@us-west-2.amazonses.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-09-18nl80211: Unsolicited broadcast probe response supportAloka Dixit
This patch adds new attributes to support unsolicited broadcast probe response transmission used for in-band discovery in 6GHz band (IEEE P802.11ax/D6.0 26.17.2.3.2, AP behavior for fast passive scanning). The new attribute, NL80211_ATTR_UNSOL_BCAST_PROBE_RESP, is nested which supports following parameters: (1) NL80211_UNSOL_BCAST_PROBE_RESP_ATTR_INT - Packet interval (2) NL80211_UNSOL_BCAST_PROBE_RESP_ATTR_TMPL - Template data Signed-off-by: Aloka Dixit <alokad@codeaurora.org> Link: https://lore.kernel.org/r/010101747a946698-aac263ae-2ed3-4dab-9590-0bc7131214e1-000000@us-west-2.amazonses.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-09-18mac80211: Add FILS discovery supportAloka Dixit
This patch adds mac80211 support to configure FILS discovery transmission. Changes include functions to store and retrieve FILS discovery template, minimum and maximum packet intervals. Signed-off-by: Aloka Dixit <alokad@codeaurora.org> Link: https://lore.kernel.org/r/20200805011838.28166-3-alokad@codeaurora.org [remove SUPPORTS_FILS_DISCOVERY, driver can just set wiphy info] Link: https://lore.kernel.org/r/010101747a7b3cbb-6edaa89c-436d-4391-8765-61456d7f5f4e-000000@us-west-2.amazonses.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-09-18nl80211: Add FILS discovery supportAloka Dixit
FILS discovery attribute, NL80211_ATTR_FILS_DISCOVERY, is nested which supports following parameters as given in IEEE Std 802.11ai-2016, Annex C.3 MIB detail: (1) NL80211_FILS_DISCOVERY_ATTR_INT_MIN - Minimum packet interval (2) NL80211_FILS_DISCOVERY_ATTR_INT_MAX - Maximum packet interval (3) NL80211_FILS_DISCOVERY_ATTR_TMPL - Template data Signed-off-by: Aloka Dixit <alokad@codeaurora.org> Link: https://lore.kernel.org/r/20200805011838.28166-2-alokad@codeaurora.org [fix attribute and other names, use NLA_RANGE(), use policy only once] Link: https://lore.kernel.org/r/010101747a7b38a8-306f06b2-9061-4baf-81c1-054a42a18e22-000000@us-west-2.amazonses.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-09-18mac80211: fix 80 MHz association to 160/80+80 AP on 6 GHzJohn Crispin
When trying to associate to an AP support 180 or 80+80 MHz on 6 GHz with a STA that only has 80 Mhz support the cf2 field inside the chandef will get set causing the association to fail when trying to validate the chandef. Fix this by checking the support flags prior to setting cf2. Fixes: 57fa5e85d53ce ("mac80211: determine chandef from HE 6 GHz operation") Signed-off-by: John Crispin <john@phrozen.org> Link: https://lore.kernel.org/r/20200918115304.1135693-1-john@phrozen.org [reword commit message a bit] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-09-18mac80211: allow bigger A-MSDU sizes in VHT, even if HT is limitedFelix Fietkau
Some APs (e.g. Asus RT-AC88U) have been observed to report an HT MSDU size limit of 3839 and a VHT limit of 7991. These APs can handle bigger frames than 3839 bytes just fine, so we should remove the VHT limit based on the HT capabilities. This improves tx throughput. Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20200916164611.8022-1-nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-09-18nl80211: support setting S1G channelsThomas Pedersen
S1G channels have a single width defined per frequency, so derive it from the channel flags with ieee80211_s1g_channel_width(). Also support setting an S1G channel where control frequency may differ from operating, and add some basic validation to ensure the control channel is with the operating. Signed-off-by: Thomas Pedersen <thomas@adapt-ip.com> Link: https://lore.kernel.org/r/20200908190323.15814-6-thomas@adapt-ip.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-09-18nl80211: correctly validate S1G beacon headThomas Pedersen
The S1G beacon has a different header size than regular beacons, so adjust the beacon head validator. Signed-off-by: Thomas Pedersen <thomas@adapt-ip.com> Link: https://lore.kernel.org/r/20200908190323.15814-5-thomas@adapt-ip.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-09-18cfg80211: regulatory: handle S1G channelsThomas Pedersen
S1G channels have a minimum bandwidth of 1Mhz, and there is a 1:1 mapping of allowed bandwidth to channel number. Signed-off-by: Thomas Pedersen <thomas@adapt-ip.com> Link: https://lore.kernel.org/r/20200908190323.15814-4-thomas@adapt-ip.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-09-18nl80211: advertise supported channel width in S1GThomas Pedersen
S1G supports 5 channel widths: 1, 2, 4, 8, and 16. One channel width is allowed per frequency in each operating class, so it makes more sense to advertise the specific channel width allowed. Signed-off-by: Thomas Pedersen <thomas@adapt-ip.com> Link: https://lore.kernel.org/r/20200908190323.15814-3-thomas@adapt-ip.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-09-18mac80211: reorganize code to remove a forward declarationFelix Fietkau
Remove the newly added ieee80211_set_vif_encap_ops declaration. No further code changes. Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20200908123702.88454-15-nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-09-18mac80211: extend ieee80211_tx_status_ext to support bulk freeFelix Fietkau
Store processed skbs ready to be freed in a list so the driver bulk free them Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20200908123702.88454-13-nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-09-18mac80211: support using ieee80211_tx_status_ext to free skbs without status infoFelix Fietkau
For encap-offloaded packets, ieee80211_free_txskb cannot be used, since it does not have the vif pointer. Using ieee80211_tx_status_ext for this purpose has the advantage of being able avoid an extra station lookup for AQL Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20200908123702.88454-12-nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-09-18mac80211: unify 802.3 (offload) and 802.11 tx status codepathFelix Fietkau
Make ieee80211_tx_status_8023 call ieee80211_tx_status_ext, similar to ieee80211_tx_status. Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20200908123702.88454-11-nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-09-18mac80211: optimize station connection monitorFelix Fietkau
Calling mod_timer for every rx/tx packet can be quite expensive. Instead of constantly updating the timer, we can simply let it run out and check the timestamp of the last ACK or rx packet to re-arm it. Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20200908123702.88454-9-nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-09-18mac80211: notify the driver when a sta uses 4-address modeFelix Fietkau
This is needed for encapsulation offload of 4-address mode packets Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20200908123702.88454-14-nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-09-18mac80211: swap NEED_TXPROCESSING and HW_80211_ENCAP tx flagsFelix Fietkau
In order to unify the tx status path, the hw 802.11 encapsulation flag needs to survive the trip to the tx status call. Since we don't have any free bits in info->flags, we need to move one. IEEE80211_TX_INTFL_NEED_TXPROCESSING is only used internally in mac80211, and only before the call into the driver. Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20200908123702.88454-10-nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-09-18mac80211: remove tx status call to ieee80211_sta_register_airtimeFelix Fietkau
All drivers using airtime fairness are calling ieee80211_sta_register_airtime directly, now they must. Document this as well. Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20200908123702.88454-8-nbd@nbd.name [johannes: update the documentation to suit] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-09-18mac80211: reduce duplication in tx status functionsFelix Fietkau
Move redundant functionality from __ieee80211_tx_status into ieee80211_tx_status_ext. Preparation for unifying with the 802.3 tx status codepath. Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20200908123702.88454-7-nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-02 08:08:42 +0000