summaryrefslogtreecommitdiff
path: root/net
AgeCommit message (Collapse)Author
2011-11-22Merge branch 'bugfixes' of git://git.linux-nfs.org/projects/trondmy/linux-nfsLinus Torvalds
* 'bugfixes' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: NFS: Revert pnfs ugliness from the generic NFS read code path SUNRPC: destroy freshly allocated transport in case of sockaddr init error NFS: Fix a regression in the referral code nfs: move nfs_file_operations declaration to bottom of file.c (try #2) nfs: when attempting to open a directory, fall back on normal lookup (try #5)
2011-11-21Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client: libceph: Allocate larger oid buffer in request msgs ceph: initialize root dentry ceph: fix iput race when queueing inode work
2011-11-18ipv4: fix redirect handlingEric Dumazet
commit f39925dbde77 (ipv4: Cache learned redirect information in inetpeer.) introduced a regression in ICMP redirect handling. It assumed ipv4_dst_check() would be called because all possible routes were attached to the inetpeer we modify in ip_rt_redirect(), but thats not true. commit 7cc9150ebe (route: fix ICMP redirect validation) tried to fix this but solution was not complete. (It fixed only one route) So we must lookup existing routes (including different TOS values) and call check_peer_redir() on them. Reported-by: Ivan Zahariev <famzah@icdsoft.com> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> CC: Flavio Leitner <fbl@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-18ping: dont increment ICMP_MIB_INERRORSEric Dumazet
ping module incorrectly increments ICMP_MIB_INERRORS if feeded with a frame not belonging to its own sockets. RFC 2011 states that ICMP_MIB_INERRORS should count "the number of ICMP messages which the entiry received but determined as having ICMP-specific errors (bad ICMP checksums, bad length, etc.)." Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> CC: Vasiliy Kulikov <segoon@openwall.com> Acked-by: Flavio Leitner <fbl@redhat.com> Acked-by: Vasiliy Kulikov <segoon@openwall.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-16bridge: correct IPv6 checksum after pullstephen hemminger
Bridge multicast snooping of ICMPv6 would incorrectly report a checksum problem when used with Ethernet devices like sky2 that use CHECKSUM_COMPLETE. When bytes are removed from skb, the computed checksum needs to be adjusted. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Tested-by: Martin Volf <martin.volf.42@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-16tcp: clear xmit timers in tcp_v4_syn_recv_sock()Eric Dumazet
Simon Kirby reported divides by zero errors in __tcp_select_window() This happens when inet_csk_route_child_sock() returns a NULL pointer : We free new socket while we eventually armed keepalive timer in tcp_create_openreq_child() Fix this by a call to tcp_clear_xmit_timers() [ This is a followup to commit 918eb39962dff (net: add missing bh_unlock_sock() calls) ] Reported-by: Simon Kirby <sim@hostway.ca> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Tested-by: Simon Kirby <sim@hostway.ca> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-14net/packet: Revert incorrect dead-code changes to prb_setup_retire_blk_timerJesper Juhl
Signed-off-by: Jesper Juhl <jj@chaosbits.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-14Merge branch 'for-davem' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless
2011-11-14net-netlink: Add a new attribute to expose TCLASS values via netlinkMaciej Żenczykowski
commit 3ceca749668a52bd795585e0f71c6f0b04814f7b added a TOS attribute. Unfortunately TOS and TCLASS are both present in a dual-stack v6 socket, furthermore they can have different values. As such one cannot in a sane way expose both through a single attribute. Signed-off-by: Maciej Żenczyowski <maze@google.com> CC: Murali Raja <muralira@google.com> CC: Stephen Hemminger <shemminger@vyatta.com> CC: Eric Dumazet <eric.dumazet@gmail.com> CC: David S. Miller <davem@davemloft.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-14bridge: Fix potential deadlock on br->multicast_lockAndrey Vagin
multicast_lock is taken in softirq context, so we should use spin_lock_bh() in userspace. call-chain in softirq context: run_timer_softirq() br_multicast_query_expired() call-chain in userspace: sysfs_write_file() store_multicast_snooping() br_multicast_toggle() Signed-off-by: Andrew Vagin <avagin@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-14ip6_tunnel: copy parms.name after register_netdeviceJosh Boyer
Commit 1c5cae815d removed an explicit call to dev_alloc_name in ip6_tnl_create because register_netdevice will now create a valid name. This works for the net_device itself. However the tunnel keeps a copy of the name in the parms structure for the ip6_tnl associated with the tunnel. parms.name is set by copying the net_device name in ip6_tnl_dev_init_gen. That function is called from ip6_tnl_dev_init in ip6_tnl_create, but it is done before register_netdevice is called so the name is set to a bogus value in the parms.name structure. This shows up if you do a simple tunnel add, followed by a tunnel show: [root@localhost ~]# ip -6 tunnel add remote fec0::100 local fec0::200 [root@localhost ~]# ip -6 tunnel show ip6tnl0: ipv6/ipv6 remote :: local :: encaplimit 0 hoplimit 0 tclass 0x00 flowlabel 0x00000 (flowinfo 0x00000000) ip6tnl%d: ipv6/ipv6 remote fec0::100 local fec0::200 encaplimit 4 hoplimit 64 tclass 0x00 flowlabel 0x00000 (flowinfo 0x00000000) [root@localhost ~]# Fix this by moving the strcpy out of ip6_tnl_dev_init_gen, and calling it after register_netdevice has successfully returned. Cc: stable@vger.kernel.org Signed-off-by: Josh Boyer <jwboyer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-14rds: drop "select LLIST"Paul Bolle
Commit 1bc144b625 ("net, rds, Replace xlist in net/rds/xlist.h with llist") added "select LLIST" to the RDS_RDMA Kconfig entry. But there is no Kconfig symbol named LLIST. The select statement for that symbol is a nop. Drop it. lib/llist.o is builtin, so all that's needed to use the llist functionality is to include linux/llist.h, which this commit also did. Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-14net/packet: remove dead code and unneeded variable from ↵Jesper Juhl
prb_setup_retire_blk_timer() We test for 'tx_ring' being != zero and BUG() if that's the case. So after that check there is no way that 'tx_ring' could be anything _but_ zero, so testing it again is just dead code. Once that dead code is removed, the 'pkc' local variable becomes entirely redundant, so remove that as well. Signed-off-by: Jesper Juhl <jj@chaosbits.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-12ah: Don't return NET_XMIT_DROP on input.Nick Bowler
When the ahash driver returns -EBUSY, AH4/6 input functions return NET_XMIT_DROP, presumably copied from the output code path. But returning transmit codes on input doesn't make a lot of sense. Since NET_XMIT_DROP is a positive int, this gets interpreted as the next header type (i.e., success). As that can only end badly, remove the check. Signed-off-by: Nick Bowler <nbowler@elliptictech.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-11libceph: Allocate larger oid buffer in request msgsStratos Psomadakis
ceph_osd_request struct allocates a 40-byte buffer for object names. RBD image names can be up to 96 chars long (100 with the .rbd suffix), which results in the object name for the image being truncated, and a subsequent map failure. Increase the oid buffer in request messages, in order to avoid the truncation. Signed-off-by: Stratos Psomadakis <psomas@grnet.gr> Signed-off-by: Sage Weil <sage@newdream.net>
2011-11-11Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless into for-davem
2011-11-10SUNRPC: destroy freshly allocated transport in case of sockaddr init errorStanislav Kinsbursky
Otherwise we will leak xprt structure and struct net reference. Signed-off-by: Stanislav Kinsbursky <skinsbursky@parallels.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-11-09Merge branch 'for-davem' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless
2011-11-09ipv4: fix for ip_options_rcv_srr() daddr update.Li Wei
When opt->srr_is_hit is set skb_rtable(skb) has been updated for 'nexthop' and iph->daddr should always equals to skb_rtable->rt_dst holds, We need update iph->daddr either. Signed-off-by: Li Wei <lw@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-09ah: Read nexthdr value before overwriting it in ahash input callback.Nick Bowler
The AH4/6 ahash input callbacks read out the nexthdr field from the AH header *after* they overwrite that header. This is obviously not going to end well. Fix it up. Signed-off-by: Nick Bowler <nbowler@elliptictech.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-09ah: Correctly pass error codes in ahash output callback.Nick Bowler
The AH4/6 ahash output callbacks pass nexthdr to xfrm_output_resume instead of the error code. This appears to be a copy+paste error from the input case, where nexthdr is expected. This causes the driver to continuously add AH headers to the datagram until either an allocation fails and the packet is dropped or the ahash driver hits a synchronous fallback and the resulting monstrosity is transmitted. Correct this issue by simply passing the error code unadulterated. Signed-off-by: Nick Bowler <nbowler@elliptictech.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-09mac80211: fix race between connection monitor & suspendJohannes Berg
When the connection monitor timer fires right before suspend, the following will happen: timer fires -> monitor_work gets queued suspend calls ieee80211_sta_quiesce ieee80211_sta_quiesce: - deletes timer - cancels monitor_work synchronously, running it [note wrong order of these steps] monitor_work runs, re-arming the timer later, timer fires while system should be quiesced This causes a warning: WARNING: at net/mac80211/util.c:540 ieee80211_can_queue_work+0x35/0x40 [mac80211]() but is otherwise harmless. I'm not completely sure this is the scenario Thomas stumbled across, but it is the only way I can right now see the warning in a scenario like the one he reported. Reported-by: Thomas Meyer <thomas@m3y3r.de> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-11-09cfg80211: fix bug on regulatory core exit on access to last_requestLuis R. Rodriguez
Commit 4d9d88d1 by Scott James Remnant <keybuk@google.com> added the .uevent() callback for the regulatory device used during the platform device registration. The change was done to account for queuing up udev change requests through udevadm triggers. The change also meant that upon regulatory core exit we will now send a uevent() but the uevent() callback, reg_device_uevent(), also accessed last_request. Right before commiting device suicide we free'd last_request but never set it to NULL so platform_device_unregister() would lead to bogus kernel paging request. Fix this and also simply supress uevents right before we commit suicide as they are pointless. This fix is required for kernels >= v2.6.39 $ git describe --contains 4d9d88d1 v2.6.39-rc1~468^2~25^2^2~21 The impact of not having this present is that a bogus paging access may occur (only read) upon cfg80211 unload time. You may also get this BUG complaint below. Although Johannes could not reproduce the issue this fix is theoretically correct. mac80211_hwsim: unregister radios mac80211_hwsim: closing netlink BUG: unable to handle kernel paging request at ffff88001a06b5ab IP: [<ffffffffa030df9a>] reg_device_uevent+0x1a/0x50 [cfg80211] PGD 1836063 PUD 183a063 PMD 1ffcb067 PTE 1a06b160 Oops: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC CPU 0 Modules linked in: cfg80211(-) [last unloaded: mac80211] Pid: 2279, comm: rmmod Tainted: G W 3.1.0-wl+ #663 Bochs Bochs RIP: 0010:[<ffffffffa030df9a>] [<ffffffffa030df9a>] reg_device_uevent+0x1a/0x50 [cfg80211] RSP: 0000:ffff88001c5f9d58 EFLAGS: 00010286 RAX: 0000000000000000 RBX: ffff88001d2eda88 RCX: ffff88001c7468fc RDX: ffff88001a06b5a0 RSI: ffff88001c7467b0 RDI: ffff88001c7467b0 RBP: ffff88001c5f9d58 R08: 000000000000ffff R09: 000000000000ffff R10: 0000000000000000 R11: 0000000000000001 R12: ffff88001c7467b0 R13: ffff88001d2eda78 R14: ffffffff8164a840 R15: 0000000000000001 FS: 00007f8a91d8a6e0(0000) GS:ffff88001fc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: ffff88001a06b5ab CR3: 000000001c62e000 CR4: 00000000000006f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process rmmod (pid: 2279, threadinfo ffff88001c5f8000, task ffff88000023c780) Stack: ffff88001c5f9d98 ffffffff812ff7e5 ffffffff8176ab3d ffff88001c7468c2 000000000000ffff ffff88001d2eda88 ffff88001c7467b0 ffff880000114820 ffff88001c5f9e38 ffffffff81241dc7 ffff88001c5f9db8 ffffffff81040189 Call Trace: [<ffffffff812ff7e5>] dev_uevent+0xc5/0x170 [<ffffffff81241dc7>] kobject_uevent_env+0x1f7/0x490 [<ffffffff81040189>] ? sub_preempt_count+0x29/0x60 [<ffffffff814cab1a>] ? _raw_spin_unlock_irqrestore+0x4a/0x90 [<ffffffff81305307>] ? devres_release_all+0x27/0x60 [<ffffffff8124206b>] kobject_uevent+0xb/0x10 [<ffffffff812fee27>] device_del+0x157/0x1b0 [<ffffffff8130377d>] platform_device_del+0x1d/0x90 [<ffffffff81303b76>] platform_device_unregister+0x16/0x30 [<ffffffffa030fffd>] regulatory_exit+0x5d/0x180 [cfg80211] [<ffffffffa032bec3>] cfg80211_exit+0x2b/0x45 [cfg80211] [<ffffffff8109a84c>] sys_delete_module+0x16c/0x220 [<ffffffff8108a23e>] ? trace_hardirqs_on_caller+0x7e/0x120 [<ffffffff814cba02>] system_call_fastpath+0x16/0x1b Code: <all your base are belong to me> RIP [<ffffffffa030df9a>] reg_device_uevent+0x1a/0x50 [cfg80211] RSP <ffff88001c5f9d58> CR2: ffff88001a06b5ab ---[ end trace 147c5099a411e8c0 ]--- Reported-by: Johannes Berg <johannes@sipsolutions.net> Cc: Scott James Remnant <keybuk@google.com> Cc: stable@vger.kernel.org Signed-off-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-11-09mac80211: fix bug in ieee80211_build_probe_reqJohannes Berg
ieee80211_probereq_get() can return NULL in which case we should clean up & return NULL in ieee80211_build_probe_req() as well. Cc: stable@vger.kernel.org Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-11-09mac80211: fix NULL dereference in radiotap codeJohannes Berg
When receiving failed PLCP frames is enabled, there won't be a rate pointer when we add the radiotap header and thus the kernel will crash. Fix this by not assuming the rate pointer is always valid. It's still always valid for frames that have good PLCP though, and that is checked & enforced. This was broken by my commit fc88518916793af8ad6a02e05ff254d95c36d875 Author: Johannes Berg <johannes.berg@intel.com> Date: Fri Jul 30 13:23:12 2010 +0200 mac80211: don't check rates on PLCP error frames where I removed the check in this case but didn't take into account that the rate info would be used. Reported-by: Xiaokang Qin <xiaokang.qin@intel.com> Cc: stable@vger.kernel.org Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-11-09Merge branch 'master' of ↵John W. Linville
ssh://ra.kernel.org/pub/scm/linux/kernel/git/linville/wireless into for-davem
2011-11-08Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/padovan/bluetooth
2011-11-08ipv4: Fix inetpeer expire time informationSteffen Klassert
As we update the learned pmtu informations on demand, we might report a nagative expiration time value to userspace if the pmtu informations are already expired and we have not send a packet to that inetpeer after expiration. With this patch we send a expire time of null to userspace after expiration until the next packet is send to that inetpeer. Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-08tcp: Fix comments for Nagle algorithmFeng King
TCP_NODELAY is weaker than TCP_CORK, when TCP_CORK was set, small segments will always pass Nagle test regardless of TCP_NODELAY option. Signed-off-by: Feng King <kinwin2008@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-08l2tp: fix l2tp_udp_recv_core()Eric Dumazet
pskb_may_pull() can change skb->data, so we have to load ptr/optr at the right place. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-08ipv6: drop packets when source address is multicastBrian Haley
RFC 4291 Section 2.7 says Multicast addresses must not be used as source addresses in IPv6 packets - drop them on input so we don't process the packet further. Signed-off-by: Brian Haley <brian.haley@hp.com> Reported-and-Tested-by: Kumar Sanghvi <divinekumar@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-07Bluetooth: Use miliseconds for L2CAP channel timeoutsAndrzej Kaczmarek
Timers set by __set_chan_timer() should use miliseconds instead of jiffies. Commit 942ecc9c4643db5ce071562e0a23f99464d6b461 updated l2cap_set_timer() so it expects timeout to be specified in msecs instead of jiffies. This makes timeouts unreliable when CONFIG_HZ is not set to 1000. Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@tieto.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-11-07Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (47 commits) forcedeth: fix a few sparse warnings (variable shadowing) forcedeth: Improve stats counters forcedeth: remove unneeded stats updates forcedeth: Acknowledge only interrupts that are being processed forcedeth: fix race when unloading module MAINTAINERS/rds: update maintainer wanrouter: Remove kernel_lock annotations usbnet: fix oops in usbnet_start_xmit ixgbe: Fix compile for kernel without CONFIG_PCI_IOV defined etherh: Add MAINTAINERS entry for etherh bonding: comparing a u8 with -1 is always false sky2: fix regression on Yukon Optima netlink: clarify attribute length check documentation netlink: validate NLA_MSECS length i825xx:xscale:8390:freescale: Fix Kconfig dependancies macvlan: receive multicast with local address tg3: Update version to 3.121 tg3: Eliminate timer race with reset_task tg3: Schedule at most one tg3_reset_task run tg3: Obtain PCI function number from device ...
2011-11-07Bluetooth: Revert: Fix L2CAP connection establishmentArek Lichwa
This reverts commit 330605423ca6eafafb8dcc27502bce1c585d1b06. The commit introduces regression when two 2.1 devices attempt establish rfcomm channel. Such connection is refused since there's a security block issue on l2cap. It means the link is unencrypted. 2011-09-16 18:08:46.567616 < ACL data: handle 1 flags 0x00 dlen 24 0000: 14 00 40 00 06 00 02 00 0f 35 03 19 12 00 ff ff ..@......5....˙˙ 0010: 35 05 0a 00 00 ff ff 00 5....˙˙. 2011-09-16 18:08:46.572377 > HCI Event: Number of Completed Packets (0x13) plen 5 handle 1 packets 1 2011-09-16 18:08:46.577931 > ACL data: handle 1 flags 0x02 dlen 88 L2CAP(d): cid 0x0040 len 84 [psm 0] 0000: 07 00 02 00 4f 00 4c 35 4a 35 48 09 00 00 0a 00 ....O.L5J5H..... 0010: 01 00 00 09 00 01 35 03 19 12 00 09 00 05 35 03 ......5.......5. 0020: 19 10 02 09 00 09 35 08 35 06 19 12 00 09 01 02 ......5.5....... 0030: 09 02 00 09 01 02 09 02 01 09 00 0a 09 02 02 09 ................ 0040: 00 00 09 02 03 09 00 00 09 02 04 28 01 09 02 05 ...........(.... 0050: 09 00 02 00 .... 2011-09-16 18:08:46.626057 < HCI Command: Authentication Requested (0x01|0x0011) plen 2 handle 1 2011-09-16 18:08:46.627614 > HCI Event: Command Status (0x0f) plen 4 Authentication Requested (0x01|0x0011) status 0x00 ncmd 1 2011-09-16 18:08:46.627675 > HCI Event: Link Key Request (0x17) plen 6 bdaddr 00:00:F2:6A:29:69 2011-09-16 18:08:46.634999 < HCI Command: Link Key Request Reply (0x01|0x000b) plen 22 bdaddr 00:00:F2:6A:29:69 key 58CD393179FC902E5E8F512A855EE532 2011-09-16 18:08:46.683278 > HCI Event: Command Complete (0x0e) plen 10 Link Key Request Reply (0x01|0x000b) ncmd 1 status 0x00 bdaddr 00:00:F2:6A:29:69 2011-09-16 18:08:46.764729 > HCI Event: Auth Complete (0x06) plen 3 status 0x00 handle 1 2011-09-16 18:08:46.764821 < ACL data: handle 1 flags 0x00 dlen 12 0000: 08 00 01 00 02 05 04 00 03 00 41 00 ..........A. 2011-09-16 18:08:46.764851 > HCI Event: Command Status (0x0f) plen 4 Unknown (0x00|0x0000) status 0x00 ncmd 2 2011-09-16 18:08:46.768117 > HCI Event: Number of Completed Packets (0x13) plen 5 handle 1 packets 1 2011-09-16 18:08:46.770894 > ACL data: handle 1 flags 0x02 dlen 16 L2CAP(s): Connect rsp: dcid 0x0000 scid 0x0041 result 3 status 0 Connection refused - security block 2011-09-16 18:08:49.000691 < ACL data: handle 1 flags 0x00 dlen 12 0000: 08 00 01 00 06 06 04 00 40 00 40 00 ........@.@. 2011-09-16 18:08:49.015675 > HCI Event: Number of Completed Packets (0x13) plen 5 handle 1 packets 1 2011-09-16 18:08:49.016927 > ACL data: handle 1 flags 0x02 dlen 12 L2CAP(s): Disconn rsp: dcid 0x0040 scid 0x0040 2011-09-16 18:08:51.009480 < HCI Command: Disconnect (0x01|0x0006) plen 3 handle 1 reason 0x13 Reason: Remote User Terminated Connection 2011-09-16 18:08:51.011525 > HCI Event: Command Status (0x0f) plen 4 Disconnect (0x01|0x0006) status 0x00 ncmd 1 2011-09-16 18:08:51.123494 > HCI Event: Disconn Complete (0x05) plen 4 status 0x00 handle 1 reason 0x16 Reason: Connection Terminated by Local Host Signed-off-by: Arek Lichwa <arkadiusz.lichwa@tieto.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-11-07wanrouter: Remove kernel_lock annotationsRichard Weinberger
The BKL is gone, these annotations are useless. Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-07mac80211: uAPSD - fix IEEE80211_FCTL_MOREDATA bit settingJanusz.Dziedzic@tieto.com
Set IEEE80211_FCTL_MOREDATA bit also in case we have buffered frames (more than one) only for one AC. Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com> Reviewed-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-11-07cfg80211: fix cmp_iesJohannes Berg
When comparing two items by IE, the sort order wasn't stable, which could lead to issues in the rbtree. Make it stable by making a missing IE sort before a present IE. Also sort by length first if it differs and then by contents. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-11-07cfg80211: allow setting TXQ parameters only in AP modeJohannes Berg
In other modes the parameters should not be set. Right now, mac80211 will set them, even if the user asked for setting them on VLANs which the driver doesn't know about, causing all kinds of trouble. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-11-07nl80211: fix HT capability attribute validationJohannes Berg
Since the NL80211_ATTR_HT_CAPABILITY attribute is used as a struct, it needs a minimum, not maximum length. Enforce that properly. Not doing so could potentially lead to reading after the buffer. Cc: stable@vger.kernel.org Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-11-07mac80211: use min rate as basic rate for buggy APsEliad Peller
Some buggy APs (and even P2P_GO) don't advertise their basic rates in the association response. In such case, use the min supported rate as the basic rate. Reported-by: Pontus Fuchs <pontus.fuchs@gmail.com> Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-11-06Merge branch 'modsplit-Oct31_2011' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux * 'modsplit-Oct31_2011' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux: (230 commits) Revert "tracing: Include module.h in define_trace.h" irq: don't put module.h into irq.h for tracking irqgen modules. bluetooth: macroize two small inlines to avoid module.h ip_vs.h: fix implicit use of module_get/module_put from module.h nf_conntrack.h: fix up fallout from implicit moduleparam.h presence include: replace linux/module.h with "struct module" wherever possible include: convert various register fcns to macros to avoid include chaining crypto.h: remove unused crypto_tfm_alg_modname() inline uwb.h: fix implicit use of asm/page.h for PAGE_SIZE pm_runtime.h: explicitly requires notifier.h linux/dmaengine.h: fix implicit use of bitmap.h and asm/page.h miscdevice.h: fix up implicit use of lists and types stop_machine.h: fix implicit use of smp.h for smp_processor_id of: fix implicit use of errno.h in include/linux/of.h of_platform.h: delete needless include <linux/module.h> acpi: remove module.h include from platform/aclinux.h miscdevice.h: delete unnecessary inclusion of module.h device_cgroup.h: delete needless include <linux/module.h> net: sch_generic remove redundant use of <linux/module.h> net: inet_timewait_sock doesnt need <linux/module.h> ... Fix up trivial conflicts (other header files, and removal of the ab3550 mfd driver) in - drivers/media/dvb/frontends/dibx000_common.c - drivers/media/video/{mt9m111.c,ov6650.c} - drivers/mfd/ab3550-core.c - include/linux/dmaengine.h
2011-11-04Merge branch 'for-davem' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless
2011-11-04Merge branch 'nfs-for-3.2' of git://git.linux-nfs.org/projects/trondmy/linux-nfsLinus Torvalds
* 'nfs-for-3.2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: (25 commits) nfs: set vs_hidden on nfs4_callback_version4 (try #2) pnfs-obj: Support for RAID5 read-4-write interface. pnfs-obj: move to ore 03: Remove old raid engine pnfs-obj: move to ore 02: move to ORE pnfs-obj: move to ore 01: ore_layout & ore_components pnfs-obj: Rename objlayout_io_state => objlayout_io_res pnfs-obj: Get rid of objlayout_{alloc,free}_io_state pnfs-obj: Return PNFS_NOT_ATTEMPTED in case of read/write_pagelist pnfs-obj: Remove redundant EOF from objlayout_io_state nfs: Remove unused variable from write.c nfs: Fix unused variable warning from file.c NFS: Remove no-op less-than-zero checks on unsigned variables. NFS: Clean up nfs4_xdr_dec_secinfo() NFS: Fix documenting comment for nfs_create_request() NFS4: fix cb_recallany decode error nfs4: serialize layoutcommit SUNRPC: remove rpcbind clients destruction on module cleanup SUNRPC: remove rpcbind clients creation during service registering NFSd: call svc rpcbind cleanup explicitly SUNRPC: cleanup service destruction ...
2011-11-04Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless into for-davem
2011-11-03af_packet: de-inline some helper functionsOlof Johansson
This popped some compiler errors due to mismatched prototypes. Just remove most manual inlines, the compiler should be able to figure out what makes sense to inline and not. net/packet/af_packet.c:252: warning: 'prb_curr_blk_in_use' declared inline after being called net/packet/af_packet.c:252: warning: previous declaration of 'prb_curr_blk_in_use' was here net/packet/af_packet.c:258: warning: 'prb_queue_frozen' declared inline after being called net/packet/af_packet.c:258: warning: previous declaration of 'prb_queue_frozen' was here net/packet/af_packet.c:248: warning: 'packet_previous_frame' declared inline after being called net/packet/af_packet.c:248: warning: previous declaration of 'packet_previous_frame' was here net/packet/af_packet.c:251: warning: 'packet_increment_head' declared inline after being called net/packet/af_packet.c:251: warning: previous declaration of 'packet_increment_head' was here Signed-off-by: Olof Johansson <olof@lixom.net> Cc: Chetan Loke <loke.chetan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-03net: Add back alignment for size for __alloc_skbTony Lindgren
Commit 87fb4b7b533073eeeaed0b6bf7c2328995f6c075 (net: more accurate skb truesize) changed the alignment of size. This can cause problems at least on some machines with NFS root: Unhandled fault: alignment exception (0x801) at 0xc183a43a Internal error: : 801 [#1] PREEMPT Modules linked in: CPU: 0 Not tainted (3.1.0-08784-g5eeee4a #733) pc : [<c02fbba0>] lr : [<c02fbb9c>] psr: 60000013 sp : c180fef8 ip : 00000000 fp : c181f580 r10: 00000000 r9 : c044b28c r8 : 00000001 r7 : c183a3a0 r6 : c1835be0 r5 : c183a412 r4 : 000001f2 r3 : 00000000 r2 : 00000000 r1 : ffffffe6 r0 : c183a43a Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment kernel Control: 0005317f Table: 10004000 DAC: 00000017 Process swapper (pid: 1, stack limit = 0xc180e270) Stack: (0xc180fef8 to 0xc1810000) fee0: 00000024 00000000 ff00: 00000000 c183b9c0 c183b8e0 c044b28c c0507ccc c019dfc4 c180ff2c c0503cf8 ff20: c180ff4c c180ff4c 00000000 c1835420 c182c740 c18349c0 c05233c0 00000000 ff40: 00000000 c00e6bb8 c180e000 00000000 c04dd82c c0507e7c c050cc18 c183b9c0 ff60: c05233c0 00000000 00000000 c01f34f4 c0430d70 c019d364 c04dd898 c04dd898 ff80: c04dd82c c0507e7c c180e000 00000000 c04c584c c01f4918 c04dd898 c04dd82c ffa0: c04ddd28 c180e000 00000000 c0008758 c181fa60 3231d82c 00000037 00000000 ffc0: 00000000 c04dd898 c04dd82c c04ddd28 00000013 00000000 00000000 00000000 ffe0: 00000000 c04b2224 00000000 c04b21a0 c001056c c001056c 00000000 00000000 Function entered at [<c02fbba0>] from [<c019dfc4>] Function entered at [<c019dfc4>] from [<c01f34f4>] Function entered at [<c01f34f4>] from [<c01f4918>] Function entered at [<c01f4918>] from [<c0008758>] Function entered at [<c0008758>] from [<c04b2224>] Function entered at [<c04b2224>] from [<c001056c>] Code: e1a00005 e3a01028 ebfa7cb0 e35a0000 (e5858028) Here PC is at __alloc_skb and &shinfo->dataref is unaligned because skb->end can be unaligned without this patch. As explained by Eric Dumazet <eric.dumazet@gmail.com>, this happens only with SLOB, and not with SLAB or SLUB: * Eric Dumazet <eric.dumazet@gmail.com> [111102 15:56]: > > Your patch is absolutely needed, I completely forgot about SLOB :( > > since, kmalloc(386) on SLOB gives exactly ksize=386 bytes, not nearest > power of two. > > [ 60.305763] malloc(size=385)->ffff880112c11e38 ksize=386 -> nsize=2 > [ 60.305921] malloc(size=385)->ffff88007c92ce28 ksize=386 -> nsize=2 > [ 60.306898] malloc(size=656)->ffff88007c44ad28 ksize=656 -> nsize=272 > [ 60.325385] malloc(size=656)->ffff88007c575868 ksize=656 -> nsize=272 > [ 60.325531] malloc(size=656)->ffff88011c777230 ksize=656 -> nsize=272 > [ 60.325701] malloc(size=656)->ffff880114011008 ksize=656 -> nsize=272 > [ 60.346716] malloc(size=385)->ffff880114142008 ksize=386 -> nsize=2 > [ 60.346900] malloc(size=385)->ffff88011c777690 ksize=386 -> nsize=2 Signed-off-by: Tony Lindgren <tony@atomide.com> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-03net: add missing bh_unlock_sock() callsEric Dumazet
Simon Kirby reported lockdep warnings and following messages : [104661.897577] huh, entered softirq 3 NET_RX ffffffff81613740 preempt_count 00000101, exited with 00000102? [104661.923653] huh, entered softirq 3 NET_RX ffffffff81613740 preempt_count 00000101, exited with 00000102? Problem comes from commit 0e734419 (ipv4: Use inet_csk_route_child_sock() in DCCP and TCP.) If inet_csk_route_child_sock() returns NULL, we should release socket lock before freeing it. Another lock imbalance exists if __inet_inherit_port() returns an error since commit 093d282321da ( tproxy: fix hash locking issue when using port redirection in __inet_inherit_port()) a backport is also needed for >= 2.6.37 kernels. Reported-by: Simon Kirby <sim@hostway.ca> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Tested-by: Eric Dumazet <eric.dumazet@gmail.com> CC: Balazs Scheidler <bazsi@balabit.hu> CC: KOVACS Krisztian <hidden@balabit.hu> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Simon Kirby <sim@hostway.ca> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-03l2tp: fix race in l2tp_recv_dequeue()Eric Dumazet
Misha Labjuk reported panics occurring in l2tp_recv_dequeue() If we release reorder_q.lock, we must not keep a dangling pointer (tmp), since another thread could manipulate reorder_q. Instead we must restart the scan at beginning of list. Reported-by: Misha Labjuk <spiked.yar@gmail.com> Tested-by: Misha Labjuk <spiked.yar@gmail.com> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-02Merge branch 'osd-devel' into nfs-for-nextTrond Myklebust
2011-11-02mac80211: disable powersave for broken APsJohannes Berg
Only AID values 1-2007 are valid, but some APs have been found to send random bogus values, in the reported case an AP that was sending the AID field value 0xffff, an AID of 0x3fff (16383). There isn't much we can do but disable powersave since there's no way it can work properly in this case. Cc: stable@vger.kernel.org Reported-by: Bill C Riemers <briemers@redhat.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-17 12:37:44 +0000