summaryrefslogtreecommitdiff
path: root/net
AgeCommit message (Collapse)Author
2021-06-23mac80211: rearrange struct txq_info for fewer holesJohannes Berg
We can slightly decrease the size of struct txq_info by rearranging some fields for fewer holes, so do that. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210618133832.1bf019a1fe2e.Ib54622b8d6dc1a9a7dc484e573c073119450538b@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-06-23mac80211: Properly WARN on HW scan before restartIlan Peer
The following race was possible: 1. The device driver requests HW restart. 2. A scan is requested from user space and is propagated to the driver. During this flow HW_SCANNING flag is set. 3. The thread that handles the HW restart is scheduled, and before starting the actual reconfiguration it checks that HW_SCANNING is not set. The flow does so without acquiring any lock, and thus the WARN fires. Fix this by checking that HW_SCANNING is on only after RTNL is acquired, i.e., user space scan request handling is no longer in transit. Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210618133832.8238ab3e19ab.I2693c581c70251472b4f9089e37e06fb2c18268f@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-06-23nl80211/cfg80211: add BSS color to NDP ranging parametersAvraham Stern
In NDP ranging, the initiator need to set the BSS color in the NDP to the BSS color of the responder. Add the BSS color as a parameter for NDP ranging. Signed-off-by: Avraham Stern <avraham.stern@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210618133832.f097a6144b59.I27dec8b994df52e691925ea61be4dd4fa6d396c0@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-06-23mac80211: add to bss_conf if broadcast TWT is supportedShaul Triebitz
Add to struct ieee80211_bss_conf a twt_broadcast field. Set it to true if both STA and AP support broadcast TWT. Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210618133832.f7c105237541.I50b302044e2b35e5ed4d3fb8bc7bd3d8bb89b1e1@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-06-23mac80211: handle rate control (RC) racing with chanctx definitionMordechay Goodstein
chanctx represents the current phy configuration and rate scale uses it for achieving max throughput, so if phy changes bandwidth to narrow bandwidth, RC should be _first_ updated to avoid using the wider bandwidth before updating the phy, and vice versa. We assume in the patch that station interface is always updated before updating phy context by calling ieee80211_vif_update_chandef. Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210618133832.fc4e24496aa2.Ic40ea947c2f65739ea4b5fe3babd0a544240ced6@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-06-23mac80211: free skb in WEP error caseJohannes Berg
If, for some strange reason, ieee80211_wep_encrypt() fails in ieee80211_send_auth() free the SKB instead of sending out the useless frame, in addition to the warning. This can't really happen since the SKB was freshly allocated. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210618133832.98f058d7a8b2.Ie605e6a10e72eae02f5734032826af48b85b6d11@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-06-23mac80211: move SMPS mode setting after ieee80211_prep_connectionShaul Triebitz
ieee80211_mgd_assoc calls ieee80211_prep_connection which might call ieee80211_prep_channel and set smps_mode to OFF. That will override the previous setting of smps_mode in ieee80211_mgd_assoc and HT SMPS will be set to "disabled" in the association request frame. Move the setting of smps_mode in ieee80211_mgd_assoc to after the call to ieee80211_prep_connection. Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210618133832.d8e5cc4b527f.Icf3a67fffbdd8c408c0cadfe43f8f4cffdc90acb@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-06-23mac80211: allow SMPS requests only in client modeJohannes Berg
The code currently allows this for AP mode, but then ignores it. Clarify that since the spec doesn't allow it in AP mode. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210618133832.0465f8bcbe32.Iba39fc559ecfa887be00a5f3beabd881e5c86e54@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-06-23mac80211: remove iwlwifi specific workaround that broke sta NDP txFelix Fietkau
Sending nulldata packets is important for sw AP link probing and detecting 4-address mode links. The checks that dropped these packets were apparently added to work around an iwlwifi firmware bug with multi-TID aggregation. Fixes: 41cbb0f5a295 ("mac80211: add support for HE") Cc: stable@vger.kernel.org Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20210619101517.90806-1-nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-06-23wireless: add check of field VHT Extended NSS BW Capable for 160/80+80 MHz ↵Wen Gong
setting Table 9-251—Supported VHT-MCS and NSS Set subfields, it has subfield VHT Extended NSS BW Capable, its definition is: Indicates whether the STA is capable of interpreting the Extended NSS BW Support subfield of the VHT Capabilities Information field. This patch is to add check for the subfield. Signed-off-by: Wen Gong <wgong@codeaurora.org> Link: https://lore.kernel.org/r/20210524033624.16993-1-wgong@codeaurora.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-06-23mac80211: check per vif offload_flags in Tx pathRyder Lee
offload_flags has been introduced to indicate encap status of each interface. An interface can encap offload at runtime, or if it has some extra limitations it can simply override the flags, so it's more flexible to check offload_flags in Tx path. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Link: https://lore.kernel.org/r/177785418cf407808bf3a44760302d0647076990.1623961575.git.ryder.lee@mediatek.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-06-23mac80211: add rate control support for encap offloadRyder Lee
The software rate control cannot deal with encap offload, so fix it. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Link: https://lore.kernel.org/r/20210617163113.75815-3-nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-06-23mac80211: call ieee80211_tx_h_rate_ctrl() when dequeueRyder Lee
Make ieee80211_tx_h_rate_ctrl() get called on dequeue to improve performance since it reduces the turnaround time for rate control. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Link: https://lore.kernel.org/r/20210617163113.75815-2-nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-06-23mac80211: move A-MPDU session check from minstrel_ht to mac80211Felix Fietkau
This avoids calling back into tx handlers from within the rate control module. Preparation for deferring rate control until tx dequeue Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20210617163113.75815-1-nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-06-23cfg80211: expose the rfkill device to the low level driverEmmanuel Grumbach
This will allow the low level driver to query the rfkill state. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Link: https://lore.kernel.org/r/20210616202826.9833-1-emmanuel.grumbach@intel.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-06-23mac80211: don't open-code LED manipulationsJohannes Berg
We shouldn't open-code led_trigger_blink() or led_trigger_event(), use them instead of badly open-coding them. This also fixes the locking, led_trigger_blink() and led_trigger_event() now use read_lock_irqsave(). Link: https://lore.kernel.org/r/20210616212804.b19ba1c60353.I8ea1b4defd5e12fc20ef281291e602feeec336a6@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-06-23mac80211: consider per-CPU statistics if presentJohannes Berg
If we have been keeping per-CPU statistics, consider them regardless of USES_RSS, because we may not actually fill those, for example in non-fast-RX cases when the connection is not compatible with fast-RX. If we didn't fill them, the additional data will be zero and not affect anything, and if we did fill them then it's more correct to consider them. This fixes an issue in mesh mode where some statistics are not updated due to USES_RSS being set, but fast-RX isn't used. Reported-by: Thiraviyam Mariyappan <tmariyap@codeaurora.org> Link: https://lore.kernel.org/r/20210610220814.13b35f5797c5.I511e9b33c5694e0d6cef4b6ae755c873d7c22124@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-06-23cfg80211: fix default HE tx bitrate mask in 2G bandPing-Ke Shih
In 2G band, a HE sta can only supports HT and HE, but not supports VHT. In this case, default HE tx bitrate mask isn't filled, when we use iw to set bitrates without any parameter. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://lore.kernel.org/r/20210609075944.51130-1-pkshih@realtek.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-06-23mac80211: remove the repeated declarationShaokun Zhang
Function 'ieee80211_sta_set_rx_nss' is declared twice, so remove the repeated declaration. Signed-off-by: Shaokun Zhang <zhangshaokun@hisilicon.com> Link: https://lore.kernel.org/r/1622196424-62403-1-git-send-email-zhangshaokun@hisilicon.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-06-23mac80211: refactor rc_no_data_or_no_ack_use_min functionPhilipp Borgers
Use newly introduced helper function ieee80211_is_tx_data to check if frame is a data frame. Takes into account that hardware encapsulation can be enabled for a frame and therefore no ieee80211 header is present. Signed-off-by: Philipp Borgers <borgers@mi.fu-berlin.de> Link: https://lore.kernel.org/r/20210519122019.92359-4-borgers@mi.fu-berlin.de Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-06-23mac80211: do not use low data rates for data frames with no ack flagPhilipp Borgers
Data Frames with no ack flag set should be handled by the rate controler. Make sure we reach the rate controler by returning early from rate_control_send_low if the frame is a data frame with no ack flag. Signed-off-by: Philipp Borgers <borgers@mi.fu-berlin.de> Link: https://lore.kernel.org/r/20210519122019.92359-3-borgers@mi.fu-berlin.de Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-06-23mac80211: simplify ieee80211_add_station()Johannes Berg
There's no need to do some kind of weird err and RCU dance just use sta_info_insert() directly. Link: https://lore.kernel.org/r/20210517230754.55abd10056c0.I6f5a3b7b23347b2cdaf64e6d5ce1d9e904059654@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-06-23mac80211: use sdata->skb_queue for TDLSJohannes Berg
We need to differentiate these frames since the ones we currently put on the skb_queue_tdls_chsw have already been converted to ethernet format, but now that we've got a single place to enqueue to the sdata->skb_queue this isn't hard. Just differentiate based on protocol and adjust the code to queue the SKBs appropriately. Link: https://lore.kernel.org/r/20210517230754.17034990abef.I5342f2183c0d246b18d36c511eb3b6be298a6572@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-06-23mac80211: refactor SKB queue processing a bitJohannes Berg
This is a very long loop body, move it into its own function instead, keeping only the kcov and free outside in the loop body. Link: https://lore.kernel.org/r/20210517230754.6bc6cdd68570.I28a86ebdb19601ca1965c4dc654cc49fc1064efa@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-06-23mac80211: unify queueing SKB to ifaceJohannes Berg
We have a bunch of places that open-code the same to queue an SKB to an interface, unify that. Link: https://lore.kernel.org/r/20210517230754.113b65febd5a.Ie0e1d58a2885e75f242cb6e06f3b9660117fef93@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-06-23mac80211: minstrel_ht: ignore frame that was sent with noAck flagPhilipp Borgers
QoS Data Frames that were sent with a No Ack policy should be ignored by the minstrel statistics. There will never be an Ack for these frames so there is no way to draw conclusions about the success of the transmission. Signed-off-by: Philipp Borgers <borgers@mi.fu-berlin.de> Link: https://lore.kernel.org/r/20210517120145.132814-1-borgers@mi.fu-berlin.de Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-06-23cfg80211: clean up variable use in cfg80211_parse_colocated_ap()Dan Carpenter
The "ap_info->tbtt_info_len" and "length" variables are the same value but it is confusing how the names are mixed up. Let's use "length" everywhere for consistency. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/YJaMNzZENkYFAYQX@mwanda Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-06-23cfg80211: remove CFG80211_MAX_NUM_DIFFERENT_CHANNELSJohannes Berg
We no longer need to put any limits here, hardware will and mac80211-hwsim can do whatever it likes. The reason we had this was some accounting code (still mentioned in the comment) but that code was deleted in commit c781944b71f8 ("cfg80211: Remove unused cfg80211_can_use_iftype_chan()"). Link: https://lore.kernel.org/r/20210506221159.d1d61db1d31c.Iac4da68d54b9f1fdc18a03586bbe06aeb9515425@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-06-23mac80211: Remove redundant assignment to retYang Li
Variable 'ret' is set to -ENODEV but this value is never read as it is overwritten with a new value later on, hence it is a redundant assignment and can be removed. Clean up the following clang-analyzer warning: net/mac80211/debugfs_netdev.c:60:2: warning: Value stored to 'ret' is never read [clang-analyzer-deadcode.DeadStores] Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> Link: https://lore.kernel.org/r/1619774483-116805-1-git-send-email-yang.lee@linux.alibaba.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-06-23net: wireless: wext_compat.c: Remove redundant assignment to psYang Li
Variable 'ps' is set to wdev->ps but this value is never read as it is overwritten with a new value later on, hence it is a redundant assignment and can be removed. Cleans up the following clang-analyzer warning: net/wireless/wext-compat.c:1170:7: warning: Value stored to 'ps' during its initialization is never read [clang-analyzer-deadcode.DeadStores] Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> Link: https://lore.kernel.org/r/1619603945-116891-1-git-send-email-yang.lee@linux.alibaba.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-06-23wireless: wext-spy: Fix out-of-bounds warningGustavo A. R. Silva
Fix the following out-of-bounds warning: net/wireless/wext-spy.c:178:2: warning: 'memcpy' offset [25, 28] from the object at 'threshold' is out of the bounds of referenced subobject 'low' with type 'struct iw_quality' at offset 20 [-Warray-bounds] The problem is that the original code is trying to copy data into a couple of struct members adjacent to each other in a single call to memcpy(). This causes a legitimate compiler warning because memcpy() overruns the length of &threshold.low and &spydata->spy_thr_low. As these are just a couple of struct members, fix this by using direct assignments, instead of memcpy(). This helps with the ongoing efforts to globally enable -Warray-bounds and get us closer to being able to tighten the FORTIFY_SOURCE routines on memcpy(). Link: https://github.com/KSPP/linux/issues/109 Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Reviewed-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20210422200032.GA168995@embeddedor Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-06-22net/xfrm: Add inner_ipproto into sec_pathHuy Nguyen
The inner_ipproto saves the inner IP protocol of the plain text packet. This allows vendor's IPsec feature making offload decision at skb's features_check and configuring hardware at ndo_start_xmit. For example, ConnectX6-DX IPsec device needs the plaintext's IP protocol to support partial checksum offload on VXLAN/GENEVE packet over IPsec transport mode tunnel. Signed-off-by: Raed Salem <raeds@nvidia.com> Signed-off-by: Huy Nguyen <huyn@nvidia.com> Cc: Steffen Klassert <steffen.klassert@secunet.com> Acked-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-06-22mptcp: refine mptcp_cleanup_rbufPaolo Abeni
The current cleanup rbuf tries a bit too hard to avoid acquiring the subflow socket lock. We may end-up delaying the needed ack, or skip acking a blocked subflow. Address the above extending the conditions used to trigger the cleanup to reflect more closely what TCP does and invoking tcp_cleanup_rbuf() on all the active subflows. Note that we can't replicate the exact tests implemented in tcp_cleanup_rbuf(), as MPTCP lacks some of the required info - e.g. ping-pong mode. Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-22mptcp: add deny_join_id0 in mptcp_options_receivedGeliang Tang
This patch added a new flag named deny_join_id0 in struct mptcp_options_received. Set it when MP_CAPABLE with the flag MPTCP_CAP_DENYJOIN_ID0 is received. Also add a new flag remote_deny_join_id0 in struct mptcp_pm_data. When the flag deny_join_id0 is set, set this remote_deny_join_id0 flag. In mptcp_pm_create_subflow_or_signal_addr, if the remote_deny_join_id0 flag is set, and the remote address id is zero, stop this connection. Suggested-by: Florian Westphal <fw@strlen.de> Acked-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Geliang Tang <geliangtang@gmail.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-22mptcp: add allow_join_id0 in mptcp_out_optionsGeliang Tang
This patch defined a new flag MPTCP_CAP_DENY_JOIN_ID0 for the third bit, labeled "C" of the MP_CAPABLE option. Add a new flag allow_join_id0 in struct mptcp_out_options. If this flag is set, send out the MP_CAPABLE option with the flag MPTCP_CAP_DENY_JOIN_ID0. Acked-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Geliang Tang <geliangtang@gmail.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-22mptcp: add sysctl allow_join_initial_addr_portGeliang Tang
This patch added a new sysctl, named allow_join_initial_addr_port, to control whether allow peers to send join requests to the IP address and port number used by the initial subflow. Suggested-by: Florian Westphal <fw@strlen.de> Acked-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Geliang Tang <geliangtang@gmail.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-22sctp: process sctp over udp icmp err on sctp sideXin Long
Previously, sctp over udp was using udp tunnel's icmp err process, which only does sk lookup on sctp side. However for sctp's icmp error process, there are more things to do, like syncing assoc pmtu/retransmit packets for toobig type err, and starting proto_unreach_timer for unreach type err etc. Now after adding PLPMTUD, which also requires to process toobig type err on sctp side. This patch is to process icmp err on sctp side by parsing the type/code/info in .encap_err_lookup and call sctp's icmp processing functions. Note as the 'redirect' err process needs to know the outer ip(v6) header's, we have to leave it to udp(v6)_err to handle it. Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-22sctp: extract sctp_v4_err_handle function from sctp_v4_errXin Long
This patch is to extract sctp_v4_err_handle() from sctp_v4_err() to only handle the icmp err after the sock lookup, and it also makes the code clearer. sctp_v4_err_handle() will be used in sctp over udp's err handling in the following patch. Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-22sctp: extract sctp_v6_err_handle function from sctp_v6_errXin Long
This patch is to extract sctp_v6_err_handle() from sctp_v6_err() to only handle the icmp err after the sock lookup, and it also makes the code clearer. sctp_v6_err_handle() will be used in sctp over udp's err handling in the following patch. Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-22sctp: remove the unessessary hold for idev in sctp_v6_errXin Long
Same as in tcp_v6_err() and __udp6_lib_err(), there's no need to hold idev in sctp_v6_err(), so just call __in6_dev_get() instead. Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-22sctp: enable PLPMTUD when the transport is readyXin Long
sctp_transport_pl_reset() is called whenever any of these 3 members in transport is changed: - probe_interval - param_flags & SPP_PMTUD_ENABLE - state == ACTIVE If all are true, start the PLPMTUD when it's not yet started. If any of these is false, stop the PLPMTUD when it's already running. sctp_transport_pl_update() is called when the transport dst has changed. It will restart the PLPMTUD probe. Again, the pathmtu won't change but use the dst's mtu until the Search phase is done. Note that after using PLPMTUD, the pathmtu is only initialized with the dst mtu when the transport dst changes. At other time it is updated by pl.pmtu. So sctp_transport_pmtu_check() will be called only when PLPMTUD is disabled in sctp_packet_config(). After this patch, the PLPMTUD feature from RFC8899 will be activated and can be used by users. Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-22sctp: do state transition when receiving an icmp TOOBIG packetXin Long
PLPMTUD will short-circuit the old process for icmp TOOBIG packets. This part is described in rfc8899#section-4.6.2 (PL_PTB_SIZE = PTB_SIZE - other_headers_len). Note that from rfc8899#section-5.2 State Machine, each case below is for some specific states only: a) PL_PTB_SIZE < MIN_PLPMTU || PL_PTB_SIZE >= PROBED_SIZE, discard it, for any state b) MIN_PLPMTU < PL_PTB_SIZE < BASE_PLPMTU, Base -> Error, for Base state c) BASE_PLPMTU <= PL_PTB_SIZE < PLPMTU, Search -> Base or Complete -> Base, for Search and Complete states. d) PLPMTU < PL_PTB_SIZE < PROBED_SIZE, set pl.probe_size to PL_PTB_SIZE then verify it, for Search state. The most important one is case d), which will help find the optimal fast during searching. Like when pathmtu = 1392 for SCTP over IPv4, the search will be (20 is iphdr_len): 1. probe with 1200 - 20 2. probe with 1232 - 20 3. probe with 1264 - 20 ... 7. probe with 1388 - 20 8. probe with 1420 - 20 When sending the probe with 1420 - 20, TOOBIG may come with PL_PTB_SIZE = 1392 - 20. Then it matches case d), and saves some rounds to try with the 1392 - 20 probe. But of course, PLPMTUD doesn't trust TOOBIG packets, and it will go back to the common searching once the probe with the new size can't be verified. Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-22sctp: do state transition when a probe succeeds on HB ACK recv pathXin Long
As described in rfc8899#section-5.2, when a probe succeeds, there might be the following state transitions: - Base -> Search, occurs when probe succeeds with BASE_PLPMTU, pl.pmtu is not changing, pl.probe_size increases by SCTP_PL_BIG_STEP, - Error -> Search, occurs when probe succeeds with BASE_PLPMTU, pl.pmtu is changed from SCTP_MIN_PLPMTU to SCTP_BASE_PLPMTU, pl.probe_size increases by SCTP_PL_BIG_STEP. - Search -> Search Complete, occurs when probe succeeds with the probe size SCTP_MAX_PLPMTU less than pl.probe_high, pl.pmtu is not changing, but update *pathmtu* with it, pl.probe_size is set back to pl.pmtu to double check it. - Search Complete -> Search, occurs when probe succeeds with the probe size equal to pl.pmtu, pl.pmtu is not changing, pl.probe_size increases by SCTP_PL_MIN_STEP. So search process can be described as: 1. When it just enters 'Search' state, *pathmtu* is not updated with pl.pmtu, and probe_size increases by a big step (SCTP_PL_BIG_STEP) each round. 2. Until pl.probe_high is set when a probe fails, and probe_size decreases back to pl.pmtu, as described in the last patch. 3. When the probe with the new size succeeds, probe_size changes to increase by a small step (SCTP_PL_MIN_STEP) due to pl.probe_high is set. 4. Until probe_size is next to pl.probe_high, the searching finishes and it goes to 'Complete' state and updates *pathmtu* with pl.pmtu, and then probe_size is set to pl.pmtu to confirm by once more probe. 5. This probe occurs after "30 * probe_inteval", a much longer time than that in Search state. Once it is done it goes to 'Search' state again with probe_size increased by SCTP_PL_MIN_STEP. As we can see above, during the searching, pl.pmtu changes while *pathmtu* doesn't. *pathmtu* is only updated when the search finishes by which it gets an optimal value for it. A big step is used at the beginning until it gets close to the optimal value, then it changes to a small step until it has this optimal value. The small step is also used in 'Complete' until it goes to 'Search' state again and the probe with 'pmtu + the small step' succeeds, which means a higher size could be used. Then probe_size changes to increase by a big step again until it gets close to the next optimal value. Note that anytime when black hole is detected, it goes directly to 'Base' state with pl.pmtu set to SCTP_BASE_PLPMTU, as described in the last patch. Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-22sctp: do state transition when PROBE_COUNT == MAX_PROBES on HB send pathXin Long
The state transition is described in rfc8899#section-5.2, PROBE_COUNT == MAX_PROBES means the probe fails for MAX times, and the state transition includes: - Base -> Error, occurs when BASE_PLPMTU Confirmation Fails, pl.pmtu is set to SCTP_MIN_PLPMTU, probe_size is still SCTP_BASE_PLPMTU; - Search -> Base, occurs when Black Hole Detected, pl.pmtu is set to SCTP_BASE_PLPMTU, probe_size is set back to SCTP_BASE_PLPMTU; - Search Complete -> Base, occurs when Black Hole Detected pl.pmtu is set to SCTP_BASE_PLPMTU, probe_size is set back to SCTP_BASE_PLPMTU; Note a black hole is encountered when a sender is unaware that packets are not being delivered to the destination endpoint. So it includes the probe failures with equal probe_size to pl.pmtu, and definitely not include that with greater probe_size than pl.pmtu. The later one is the normal probe failure where probe_size should decrease back to pl.pmtu and pl.probe_high is set. pl.probe_high would be used on HB ACK recv path in the next patch. Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-22sctp: do the basic send and recv for PLPMTUD probeXin Long
This patch does exactly what rfc8899#section-6.2.1.2 says: The SCTP sender needs to be able to determine the total size of a probe packet. The HEARTBEAT chunk could carry a Heartbeat Information parameter that includes, besides the information suggested in [RFC4960], the probe size to help an implementation associate a HEARTBEAT ACK with the size of probe that was sent. The sender could also use other methods, such as sending a nonce and verifying the information returned also contains the corresponding nonce. The length of the PAD chunk is computed by reducing the probing size by the size of the SCTP common header and the HEARTBEAT chunk. Note that HB ACK chunk will carry back whatever HB chunk carried, including the probe_size we put it in; We also check hbinfo->probe_size in the HB ACK against link->pl.probe_size to validate this HB ACK chunk. v1->v2: - Remove the unused 'sp' and add static for sctp_packet_bundle_pad(). Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-22sctp: add the probe timer in transport for PLPMTUDXin Long
There are 3 timers described in rfc8899#section-5.1.1: PROBE_TIMER, PMTU_RAISE_TIMER, CONFIRMATION_TIMER This patches adds a 'probe_timer' in transport, and it works as either PROBE_TIMER or PMTU_RAISE_TIMER. At most time, it works as PROBE_TIMER and expires every a 'probe_interval' time to send the HB probe packet. When transport pl enters COMPLETE state, it works as PMTU_RAISE_TIMER and expires in 'probe_interval * 30' time to go back to SEARCH state and do searching again. SCTP HB is an acknowledged packet, CONFIRMATION_TIMER is not needed. The timer will start when transport pl enters BASE state and stop when it enters DISABLED state. Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-22sctp: add SCTP_PLPMTUD_PROBE_INTERVAL sockopt for sock/asoc/transportXin Long
With this socket option, users can change probe_interval for a transport, asoc or sock after it's created. Note that if the change is for an asoc, also apply the change to each transport in this asoc. Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-22sctp: add probe_interval in sysctl and sock/asoc/transportXin Long
PLPMTUD can be enabled by doing 'sysctl -w net.sctp.probe_interval=n'. 'n' is the interval for PLPMTUD probe timer in milliseconds, and it can't be less than 5000 if it's not 0. All asoc/transport's PLPMTUD in a new socket will be enabled by default. Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-22sctp: add pad chunk and its make function and event tableXin Long
This chunk is defined in rfc4820#section-3, and used to pad an SCTP packet. The receiver must discard this chunk and continue processing the rest of the chunks in the packet. Add it now, as it will be bundled with a heartbeat chunk to probe pmtu in the following patches. Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-22openvswitch: add trace pointsAaron Conole
This makes openvswitch module use the event tracing framework to log the upcall interface and action execution pipeline. When using openvswitch as the packet forwarding engine, some types of debugging are made possible simply by using the ovs-vswitchd's ofproto/trace command. However, such a command has some limitations: 1. When trying to trace packets that go through the CT action, the state of the packet can't be determined, and probably would be potentially wrong. 2. Deducing problem packets can sometimes be difficult as well even if many of the flows are known 3. It's possible to use the openvswitch module even without the ovs-vswitchd (although, not common use). Introduce the event tracing points here to make it possible for working through these problems in kernel space. The style is copied from the mac80211 driver-trace / trace code for consistency - this creates some checkpatch splats, but the official 'guide' for adding tracepoints, as well as the existing examples all add the same splats so it seems acceptable. Signed-off-by: Aaron Conole <aconole@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-15 04:00:40 +0000