summaryrefslogtreecommitdiff
path: root/net
AgeCommit message (Collapse)Author
2019-02-13netfilter: reject: skip csum verification for protocols that don't support itAlin Nastac
Some protocols have other means to verify the payload integrity (AH, ESP, SCTP) while others are incompatible with nf_ip(6)_checksum implementation because checksum is either optional or might be partial (UDPLITE, DCCP, GRE). Because nf_ip(6)_checksum was used to validate the packets, ip(6)tables REJECT rules were not capable to generate ICMP(v6) errors for the protocols mentioned above. This commit also fixes the incorrect pseudo-header protocol used for IPv4 packets that carry other transport protocols than TCP or UDP (pseudo-header used protocol 0 iso the proper value). Signed-off-by: Alin Nastac <alin.nastac@gmail.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2019-02-12netfilter: conntrack: fix cloned unconfirmed skb->_nfct race in ↵Chieh-Min Wang
__nf_conntrack_confirm For bridge(br_flood) or broadcast/multicast packets, they could clone skb with unconfirmed conntrack which break the rule that unconfirmed skb->_nfct is never shared. With nfqueue running on my system, the race can be easily reproduced with following warning calltrace: [13257.707525] CPU: 0 PID: 12132 Comm: main Tainted: P W 4.4.60 #7744 [13257.707568] Hardware name: Qualcomm (Flattened Device Tree) [13257.714700] [<c021f6dc>] (unwind_backtrace) from [<c021bce8>] (show_stack+0x10/0x14) [13257.720253] [<c021bce8>] (show_stack) from [<c0449e10>] (dump_stack+0x94/0xa8) [13257.728240] [<c0449e10>] (dump_stack) from [<c022a7e0>] (warn_slowpath_common+0x94/0xb0) [13257.735268] [<c022a7e0>] (warn_slowpath_common) from [<c022a898>] (warn_slowpath_null+0x1c/0x24) [13257.743519] [<c022a898>] (warn_slowpath_null) from [<c06ee450>] (__nf_conntrack_confirm+0xa8/0x618) [13257.752284] [<c06ee450>] (__nf_conntrack_confirm) from [<c0772670>] (ipv4_confirm+0xb8/0xfc) [13257.761049] [<c0772670>] (ipv4_confirm) from [<c06e7a60>] (nf_iterate+0x48/0xa8) [13257.769725] [<c06e7a60>] (nf_iterate) from [<c06e7af0>] (nf_hook_slow+0x30/0xb0) [13257.777108] [<c06e7af0>] (nf_hook_slow) from [<c07f20b4>] (br_nf_post_routing+0x274/0x31c) [13257.784486] [<c07f20b4>] (br_nf_post_routing) from [<c06e7a60>] (nf_iterate+0x48/0xa8) [13257.792556] [<c06e7a60>] (nf_iterate) from [<c06e7af0>] (nf_hook_slow+0x30/0xb0) [13257.800458] [<c06e7af0>] (nf_hook_slow) from [<c07e5580>] (br_forward_finish+0x94/0xa4) [13257.808010] [<c07e5580>] (br_forward_finish) from [<c07f22ac>] (br_nf_forward_finish+0x150/0x1ac) [13257.815736] [<c07f22ac>] (br_nf_forward_finish) from [<c06e8df0>] (nf_reinject+0x108/0x170) [13257.824762] [<c06e8df0>] (nf_reinject) from [<c06ea854>] (nfqnl_recv_verdict+0x3d8/0x420) [13257.832924] [<c06ea854>] (nfqnl_recv_verdict) from [<c06e940c>] (nfnetlink_rcv_msg+0x158/0x248) [13257.841256] [<c06e940c>] (nfnetlink_rcv_msg) from [<c06e5564>] (netlink_rcv_skb+0x54/0xb0) [13257.849762] [<c06e5564>] (netlink_rcv_skb) from [<c06e4ec8>] (netlink_unicast+0x148/0x23c) [13257.858093] [<c06e4ec8>] (netlink_unicast) from [<c06e5364>] (netlink_sendmsg+0x2ec/0x368) [13257.866348] [<c06e5364>] (netlink_sendmsg) from [<c069fb8c>] (sock_sendmsg+0x34/0x44) [13257.874590] [<c069fb8c>] (sock_sendmsg) from [<c06a03dc>] (___sys_sendmsg+0x1ec/0x200) [13257.882489] [<c06a03dc>] (___sys_sendmsg) from [<c06a11c8>] (__sys_sendmsg+0x3c/0x64) [13257.890300] [<c06a11c8>] (__sys_sendmsg) from [<c0209b40>] (ret_fast_syscall+0x0/0x34) The original code just triggered the warning but do nothing. It will caused the shared conntrack moves to the dying list and the packet be droppped (nf_ct_resolve_clash returns NF_DROP for dying conntrack). - Reproduce steps: +----------------------------+ | br0(bridge) | | | +-+---------+---------+------+ | eth0| | eth1| | eth2| | | | | | | +--+--+ +--+--+ +---+-+ | | | | | | +--+-+ +-+--+ +--+-+ | PC1| | PC2| | PC3| +----+ +----+ +----+ iptables -A FORWARD -m mark --mark 0x1000000/0x1000000 -j NFQUEUE --queue-num 100 --queue-bypass ps: Our nfq userspace program will set mark on packets whose connection has already been processed. PC1 sends broadcast packets simulated by hping3: hping3 --rand-source --udp 192.168.1.255 -i u100 - Broadcast racing flow chart is as follow: br_handle_frame BR_HOOK(NFPROTO_BRIDGE, NF_BR_PRE_ROUTING, br_handle_frame_finish) // skb->_nfct (unconfirmed conntrack) is constructed at PRE_ROUTING stage br_handle_frame_finish // check if this packet is broadcast br_flood_forward br_flood list_for_each_entry_rcu(p, &br->port_list, list) // iterate through each port maybe_deliver deliver_clone skb = skb_clone(skb) __br_forward BR_HOOK(NFPROTO_BRIDGE, NF_BR_FORWARD,...) // queue in our nfq and received by our userspace program // goto __nf_conntrack_confirm with process context on CPU 1 br_pass_frame_up BR_HOOK(NFPROTO_BRIDGE, NF_BR_LOCAL_IN,...) // goto __nf_conntrack_confirm with softirq context on CPU 0 Because conntrack confirm can happen at both INPUT and POSTROUTING stage. So with NFQUEUE running, skb->_nfct with the same unconfirmed conntrack could race on different core. This patch fixes a repeating kernel splat, now it is only displayed once. Signed-off-by: Chieh-Min Wang <chiehminw@synology.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2019-02-12netfilter: xt_recent: Use struct_size() in kvzalloc()Gustavo A. R. Silva
One of the more common cases of allocation size calculations is finding the size of a structure that has a zero-sized array at the end, along with memory for some number of elements for that array. For example: struct foo { int stuff; void *entry[]; }; size = sizeof(struct foo) + count * sizeof(void *); instance = alloc(size, GFP_KERNEL) Instead of leaving these open-coded and prone to type mistakes, we can now use the new struct_size() helper: size = struct_size(instance, entry, count); instance = alloc(size, GFP_KERNEL) Notice that, in this case, variable sz is not necessary, hence it is removed. This code was detected with the help of Coccinelle. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2019-02-12ipvs: Use struct_size() helperGustavo A. R. Silva
One of the more common cases of allocation size calculations is finding the size of a structure that has a zero-sized array at the end, along with memory for some number of elements for that array. For example: struct foo { int stuff; struct boo entry[]; }; size = sizeof(struct foo) + count * sizeof(struct boo); instance = alloc(size, GFP_KERNEL) Instead of leaving these open-coded and prone to type mistakes, we can now use the new struct_size() helper: size = struct_size(instance, entry, count); This code was detected with the help of Coccinelle. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Acked-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2019-02-12netfilter: conntrack: fix indentation issueColin Ian King
A statement in an if block is not indented correctly. Fix this. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2019-02-04netfilter: ipv6: avoid indirect calls for IPV6=y caseFlorian Westphal
indirect calls are only needed if ipv6 is a module. Add helpers to abstract the v6ops indirections and use them instead. fragment, reroute and route_input are kept as indirect calls. The first two are not not used in hot path and route_input is only used by bridge netfilter. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2019-02-04netfilter: nat: remove module dependency on ipv6 coreFlorian Westphal
nf_nat_ipv6 calls two ipv6 core functions, so add those to v6ops to avoid the module dependency. This is a prerequisite for merging ipv4 and ipv6 nat implementations. Add wrappers to avoid the indirection if ipv6 is builtin. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2019-02-04netfilter: nft_tunnel: Add NFTA_TUNNEL_MODE optionswenxu
nft "tunnel" expr match both the tun_info of RX and TX. This patch provide the NFTA_TUNNEL_MODE to individually match the tun_info of RX or TX. Signed-off-by: wenxu <wenxu@ucloud.cn> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2019-01-29netfilter: nf_tables: add NFTA_RULE_POSITION_ID to nla_policyFlorian Westphal
Fixes: 75dd48e2e420a ("netfilter: nf_tables: Support RULE_ID reference in new rule") Reported-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: Florian Westphal <fw@strlen.de> Acked-by: Phil Sutter <phil@nwl.cc> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2019-01-28Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextDavid S. Miller
Daniel Borkmann says: ==================== pull-request: bpf-next 2019-01-29 The following pull-request contains BPF updates for your *net-next* tree. The main changes are: 1) Teach verifier dead code removal, this also allows for optimizing / removing conditional branches around dead code and to shrink the resulting image. Code store constrained architectures like nfp would have hard time doing this at JIT level, from Jakub. 2) Add JMP32 instructions to BPF ISA in order to allow for optimizing code generation for 32-bit sub-registers. Evaluation shows that this can result in code reduction of ~5-20% compared to 64 bit-only code generation. Also add implementation for most JITs, from Jiong. 3) Add support for __int128 types in BTF which is also needed for vmlinux's BTF conversion to work, from Yonghong. 4) Add a new command to bpftool in order to dump a list of BPF-related parameters from the system or for a specific network device e.g. in terms of available prog/map types or helper functions, from Quentin. 5) Add AF_XDP sock_diag interface for querying sockets from user space which provides information about the RX/TX/fill/completion rings, umem, memory usage etc, from Björn. 6) Add skb context access for skb_shared_info->gso_segs field, from Eric. 7) Add support for testing flow dissector BPF programs by extending existing BPF_PROG_TEST_RUN infrastructure, from Stanislav. 8) Split BPF kselftest's test_verifier into various subgroups of tests in order better deal with merge conflicts in this area, from Jakub. 9) Add support for queue/stack manipulations in bpftool, from Stanislav. 10) Document BTF, from Yonghong. 11) Dump supported ELF section names in libbpf on program load failure, from Taeung. 12) Silence a false positive compiler warning in verifier's BTF handling, from Peter. 13) Fix help string in bpftool's feature probing, from Prashant. 14) Remove duplicate includes in BPF kselftests, from Yue. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-28Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf-nextDavid S. Miller
Pablo Neira Ayuso says: ==================== Netfilter/IPVS updates for net-next The following patchset contains Netfilter/IPVS updates for your net-next tree: 1) Introduce a hashtable to speed up object lookups, from Florian Westphal. 2) Make direct calls to built-in extension, also from Florian. 3) Call helper before confirming the conntrack as it used to be originally, from Florian. 4) Call request_module() to autoload br_netfilter when physdev is used to relax the dependency, also from Florian. 5) Allow to insert rules at a given position ID that is internal to the batch, from Phil Sutter. 6) Several patches to replace conntrack indirections by direct calls, and to reduce modularization, from Florian. This also includes several follow up patches to deal with minor fallout from this rework. 7) Use RCU from conntrack gre helper, from Florian. 8) GRE conntrack module becomes built-in into nf_conntrack, from Florian. 9) Replace nf_ct_invert_tuplepr() by calls to nf_ct_invert_tuple(), from Florian. 10) Unify sysctl handling at the core of nf_conntrack, from Florian. 11) Provide modparam to register conntrack hooks. 12) Allow to match on the interface kind string, from wenxu. 13) Remove several exported symbols, not required anymore now after a bit of de-modulatization work has been done, from Florian. 14) Remove built-in map support in the hash extension, this can be done with the existing userspace infrastructure, from laura. 15) Remove indirection to calculate checksums in IPVS, from Matteo Croce. 16) Use call wrappers for indirection in IPVS, also from Matteo. 17) Remove superfluous __percpu parameter in nft_counter, patch from Luc Van Oostenryck. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-29bpf: add BPF_PROG_TEST_RUN support for flow dissectorStanislav Fomichev
The input is packet data, the output is struct bpf_flow_key. This should make it easy to test flow dissector programs without elaborate setup. Signed-off-by: Stanislav Fomichev <sdf@google.com> Acked-by: Song Liu <songliubraving@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-01-29net/flow_dissector: move bpf case into __skb_flow_bpf_dissectStanislav Fomichev
This way, we can reuse it for flow dissector in BPF_PROG_TEST_RUN. No functional changes. Signed-off-by: Stanislav Fomichev <sdf@google.com> Acked-by: Song Liu <songliubraving@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-01-28netfilter: ipv4: remove useless export_symbolFlorian Westphal
Only one caller; place it where needed and get rid of the EXPORT_SYMBOL. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2019-01-28netfilter: conntrack: fix error path in nf_conntrack_pernet_init()Cong Wang
When nf_ct_netns_get() fails, it should clean up itself, its caller doesn't need to call nf_conntrack_fini_net(). nf_conntrack_init_net() is called after registering sysctl and proc, so its cleanup function should be called before unregistering sysctl and proc. Fixes: ba3fbe663635 ("netfilter: nf_conntrack: provide modparam to always register conntrack hooks") Fixes: b884fa461776 ("netfilter: conntrack: unify sysctl handling") Reported-and-tested-by: syzbot+fcee88b2d87f0539dfe9@syzkaller.appspotmail.com Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2019-01-28netfilter: nft_counter: remove wrong __percpu of nft_counter_resest()'s argLuc Van Oostenryck
nft_counter_rest() has its first argument declared as struct nft_counter_percpu_priv __percpu *priv but this structure is not percpu (it only countains a member 'counter' which is, correctly, a pointer to a percpu struct nft_counter). So, remove the '__percpu' from the argument's declaration. Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2019-01-28ipvs: use indirect call wrappersMatteo Croce
Use the new indirect call wrappers in IPVS when calling the TCP or UDP protocol specific functions. This avoids an indirect calls in IPVS, and reduces the performance impact of the Spectre mitigation. Signed-off-by: Matteo Croce <mcroce@redhat.com> Acked-by: Julian Anastasov <ja@ssi.bg> Acked-by: Simon Horman <horms@verge.net.au> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2019-01-28ipvs: avoid indirect calls when calculating checksumsMatteo Croce
The function pointer ip_vs_protocol->csum_check is only used in protocol specific code, and never in the generic one. Remove the function pointer from struct ip_vs_protocol and call the checksum functions directly. This reduces the performance impact of the Spectre mitigation, and should give a small improvement even with RETPOLINES disabled. Signed-off-by: Matteo Croce <mcroce@redhat.com> Acked-by: Julian Anastasov <ja@ssi.bg> Acked-by: Simon Horman <horms@verge.net.au> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2019-01-27tcp: change pingpong threshold to 3Wei Wang
In order to be more confident about an on-going interactive session, we increment pingpong count by 1 for every interactive transaction and we adjust TCP_PINGPONG_THRESH to 3. This means, we only consider a session in pingpong mode after we see 3 interactive transactions, and start to activate delayed acks in quick ack mode. And in order to not over-count the credits, we only increase pingpong count for the first packet sent in response for the previous received packet. This is mainly to prevent delaying the ack immediately after some handshake protocol but no real interactive traffic pattern afterwards. Signed-off-by: Wei Wang <weiwan@google.com> Signed-off-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-27tcp: Refactor pingpong codeWei Wang
Instead of using pingpong as a single bit information, we refactor the code to treat it as a counter. When interactive session is detected, we set pingpong count to TCP_PINGPONG_THRESH. And when pingpong count is >= TCP_PINGPONG_THRESH, we consider the session in pingpong mode. This patch is a pure refactor and sets foundation for the next patch. This patch itself does not change any pingpong logic. Signed-off-by: Wei Wang <weiwan@google.com> Signed-off-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-27net: ipv4: ip_input: fix blank line coding style issuesYang Wei
Fix blank line coding style issues, make the code cleaner. Remove a redundant blank line in ip_rcv_core(). Insert a blank line in ip_rcv() between different statement blocks. Signed-off-by: Yang Wei <yang.wei9@zte.com.cn> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-27Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
2019-01-27Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking fixes from David Miller: 1) Count ttl-dropped frames properly in mac80211, from Bob Copeland. 2) Integer overflow in ktime handling of bcm can code, from Oliver Hartkopp. 3) Fix RX desc handling wrt. hw checksumming in ravb, from Simon Horman. 4) Various hash key fixes in hv_netvsc, from Haiyang Zhang. 5) Use after free in ax25, from Eric Dumazet. 6) Several fixes to the SSN support in SCTP, from Xin Long. 7) Do not process frames after a NAPI reschedule in ibmveth, from Thomas Falcon. 8) Fix NLA_POLICY_NESTED arguments, from Johannes Berg. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (42 commits) qed: Revert error handling changes. cfg80211: extend range deviation for DMG cfg80211: reg: remove warn_on for a normal case mac80211: Add attribute aligned(2) to struct 'action' mac80211: don't initiate TDLS connection if station is not associated to AP nl80211: fix NLA_POLICY_NESTED() arguments ibmveth: Do not process frames after calling napi_reschedule net: dev_is_mac_header_xmit() true for ARPHRD_RAWIP net: usb: asix: ax88772_bind return error when hw_reset fail MAINTAINERS: Update cavium networking drivers net/mlx4_core: Fix error handling when initializing CQ bufs in the driver net/mlx4_core: Add masking for a few queries on HCA caps sctp: set flow sport from saddr only when it's 0 sctp: set chunk transport correctly when it's a new asoc sctp: improve the events for sctp stream adding sctp: improve the events for sctp stream reset ip_tunnel: Make none-tunnel-dst tunnel port work with lwtunnel ax25: fix possible use-after-free sfc: suppress duplicate nvmem partition types in efx_ef10_mtd_probe hv_netvsc: fix typos in code comments ...
2019-01-26ip_gre: Refactor collect metatdata mode tunnel xmit to ip_md_tunnel_xmitwenxu
Refactor collect metatdata mode tunnel xmit to the generic xmit function ip_md_tunnel_xmit. It makes codes more generic and support more feture such as pmtu_update through ip_md_tunnel_xmit Signed-off-by: wenxu <wenxu@ucloud.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-26ip_tunnel: Fix route fl4 init in ip_md_tunnel_xmitwenxu
Init the gre_key from tuninfo->key.tun_id and init the mark from the skb->mark, set the oif to zero in the collect metadata mode. Fixes: cfc7381b3002 ("ip_tunnel: add collect_md mode to IPIP tunnel") Signed-off-by: wenxu <wenxu@ucloud.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-26ip_tunnel: Add tnl_update_pmtu in ip_md_tunnel_xmitwenxu
Add tnl_update_pmtu in ip_md_tunnel_xmit to dynamic modify the pmtu which packet send through collect_metadata mode ip tunnel Signed-off-by: wenxu <wenxu@ucloud.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-26ip_tunnel: Add ip tunnel dst_cache in ip_md_tunnel_xmitwenxu
Add ip tunnel dst cache in ip_md_tunnel_xmit to make more efficient for the route lookup. Signed-off-by: wenxu <wenxu@ucloud.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-25tcp: allow zerocopy with fastopenWillem de Bruijn
Accept MSG_ZEROCOPY in all the TCP states that allow sendmsg. Remove the explicit check for ESTABLISHED and CLOSE_WAIT states. This requires correctly handling zerocopy state (uarg, sk_zckey) in all paths reachable from other TCP states. Such as the EPIPE case in sk_stream_wait_connect, which a sendmsg() in incorrect state will now hit. Most paths are already safe. Only extension needed is for TCP Fastopen active open. This can build an skb with data in tcp_send_syn_data. Pass the uarg along with other fastopen state, so that this skb also generates a zerocopy notification on release. Tested with active and passive tcp fastopen packetdrill scripts at https://github.com/wdebruij/packetdrill/commit/1747eef03d25a2404e8132817d0f1244fd6f129d Signed-off-by: Willem de Bruijn <willemb@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-25net: IP6 defrag: use rbtrees in nf_conntrack_reasm.cPeter Oskolkov
Currently, IPv6 defragmentation code drops non-last fragments that are smaller than 1280 bytes: see commit 0ed4229b08c1 ("ipv6: defrag: drop non-last frags smaller than min mtu") This behavior is not specified in IPv6 RFCs and appears to break compatibility with some IPv6 implemenations, as reported here: https://www.spinics.net/lists/netdev/msg543846.html This patch re-uses common IP defragmentation queueing and reassembly code in IP6 defragmentation in nf_conntrack, removing the 1280 byte restriction. Signed-off-by: Peter Oskolkov <posk@google.com> Reported-by: Tom Herbert <tom@herbertland.com> Cc: Eric Dumazet <edumazet@google.com> Cc: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-25net: IP6 defrag: use rbtrees for IPv6 defragPeter Oskolkov
Currently, IPv6 defragmentation code drops non-last fragments that are smaller than 1280 bytes: see commit 0ed4229b08c1 ("ipv6: defrag: drop non-last frags smaller than min mtu") This behavior is not specified in IPv6 RFCs and appears to break compatibility with some IPv6 implemenations, as reported here: https://www.spinics.net/lists/netdev/msg543846.html This patch re-uses common IP defragmentation queueing and reassembly code in IPv6, removing the 1280 byte restriction. Signed-off-by: Peter Oskolkov <posk@google.com> Reported-by: Tom Herbert <tom@herbertland.com> Cc: Eric Dumazet <edumazet@google.com> Cc: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-25net: IP defrag: encapsulate rbtree defrag code into callable functionsPeter Oskolkov
This is a refactoring patch: without changing runtime behavior, it moves rbtree-related code from IPv4-specific files/functions into .h/.c defrag files shared with IPv6 defragmentation code. Signed-off-by: Peter Oskolkov <posk@google.com> Cc: Eric Dumazet <edumazet@google.com> Cc: Florian Westphal <fw@strlen.de> Cc: Tom Herbert <tom@herbertland.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-25Merge tag 'mac80211-for-davem-2019-01-25' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211 Johannes Berg says: ==================== Just a few small fixes: * avoid trying to operate TDLS when not connection, this is not valid and led to issues * count TTL-dropped frames in mesh better * deal with new WiGig channels in regulatory code * remove a WARN_ON() that can trigger due to benign races during device/driver registration * fix nested netlink policy maxattrs (syzkaller) * fix hwsim n_limits (syzkaller) * propagate __aligned(2) to a surrounding struct * return proper error in virt_wifi error path ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-25net: Revert devlink health changes.David S. Miller
This reverts the devlink health changes from 9/17/2019, Jiri wants things to be designed differently and it was agreed that the easiest way to do this is start from the beginning again. Commits reverted: cb5ccfbe73b389470e1dc11061bb185ef4bc9aec 880ee82f0313453ec5a6cb122866ac057263066b c7af343b4e33578b7de91786a3f639c8cfa0d97b ff253fedab961b22117a73ab808fcfa9e6852b50 6f9d56132eb6d2603d4273cfc65bed914ec47acb fcd852c69d776c0f46c8f79e8e431e5cc6ddc7b7 8a66704a13d9713593342e29b4f0c19762f5746b 12bd0dcefe88782ac1c9fff632958dd1b71d27e5 aba25279c10094c5c97d09c3491ca86d00b4ad5e ce019faa70f81555fa17ebc1d5a03651f2e7e15a b8c45a033acc607201588f7665ba84207e5149e0 And the follow-on build fix: o33a0efa4baecd689da9474ce0e8b673eb6931c60 Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-25cfg80211: extend range deviation for DMGChaitanya Tata
Recently, DMG frequency bands have been extended till 71GHz, so extend the range check till 20GHz (45-71GHZ), else some channels will be marked as disabled. Signed-off-by: Chaitanya Tata <Chaitanya.Tata@bluwireless.co.uk> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-01-25cfg80211: reg: remove warn_on for a normal caseChaitanya Tata
If there are simulatenous queries of regdb, then there might be a case where multiple queries can trigger request_firmware_no_wait and can have parallel callbacks being executed asynchronously. In this scenario we might hit the WARN_ON. So remove the warn_on, as the code already handles multiple callbacks gracefully. Signed-off-by: Chaitanya Tata <chaitanya.tata@bluwireless.co.uk> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-01-25mac80211: Add attribute aligned(2) to struct 'action'Mathieu Malaterre
During refactor in commit 9e478066eae4 ("mac80211: fix MU-MIMO follow-MAC mode") a new struct 'action' was declared with packed attribute as: struct { struct ieee80211_hdr_3addr hdr; u8 category; u8 action_code; } __packed action; But since struct 'ieee80211_hdr_3addr' is declared with an aligned keyword as: struct ieee80211_hdr { __le16 frame_control; __le16 duration_id; u8 addr1[ETH_ALEN]; u8 addr2[ETH_ALEN]; u8 addr3[ETH_ALEN]; __le16 seq_ctrl; u8 addr4[ETH_ALEN]; } __packed __aligned(2); Solve the ambiguity of placing aligned structure in a packed one by adding the aligned(2) attribute to struct 'action'. This removes the following warning (W=1): net/mac80211/rx.c:234:2: warning: alignment 1 of 'struct <anonymous>' is less than 2 [-Wpacked-not-aligned] Cc: Johannes Berg <johannes.berg@intel.com> Suggested-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Mathieu Malaterre <malat@debian.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-01-25mac80211: don't initiate TDLS connection if station is not associated to APBalaji Pothunoori
Following call trace is observed while adding TDLS peer entry in driver during TDLS setup. Call Trace: [<c1301476>] dump_stack+0x47/0x61 [<c10537d2>] __warn+0xe2/0x100 [<fa22415f>] ? sta_apply_parameters+0x49f/0x550 [mac80211] [<c1053895>] warn_slowpath_null+0x25/0x30 [<fa22415f>] sta_apply_parameters+0x49f/0x550 [mac80211] [<fa20ad42>] ? sta_info_alloc+0x1c2/0x450 [mac80211] [<fa224623>] ieee80211_add_station+0xe3/0x160 [mac80211] [<c1876fe3>] nl80211_new_station+0x273/0x420 [<c170f6d9>] genl_rcv_msg+0x219/0x3c0 [<c170f4c0>] ? genl_rcv+0x30/0x30 [<c170ee7e>] netlink_rcv_skb+0x8e/0xb0 [<c170f4ac>] genl_rcv+0x1c/0x30 [<c170e8aa>] netlink_unicast+0x13a/0x1d0 [<c170ec18>] netlink_sendmsg+0x2d8/0x390 [<c16c5acd>] sock_sendmsg+0x2d/0x40 [<c16c6369>] ___sys_sendmsg+0x1d9/0x1e0 Fixing this by allowing TDLS setup request only when we have completed association. Signed-off-by: Balaji Pothunoori <bpothuno@codeaurora.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-01-25nl80211: fix NLA_POLICY_NESTED() argumentsJohannes Berg
syzbot reported an out-of-bounds read when passing certain malformed messages into nl80211. The specific place where this happened isn't interesting, the problem is that nested policy parsing was referring to the wrong maximum attribute and thus the policy wasn't long enough. Fix this by referring to the correct attribute. Since this is really not necessary, I'll come up with a separate patch to just pass the policy instead of both, in the common case we can infer the maxattr from the size of the policy array. Reported-by: syzbot+4157b036c5f4713b1f2f@syzkaller.appspotmail.com Cc: stable@vger.kernel.org Fixes: 9bb7e0f24e7e ("cfg80211: add peer measurement with FTM initiator API") Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-01-24bridge: remove duplicated include from br_multicast.cYueHaibing
Remove duplicated include. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-24tipc: remove dead code in struct tipc_topsrvZhaolong Zhang
max_rcvbuf_size is no longer used since commit "414574a0af36". Signed-off-by: Zhaolong Zhang <zhangzl2013@126.com> Acked-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-24tcp_bbr: adapt cwnd based on ack aggregation estimationPriyaranjan Jha
Aggregation effects are extremely common with wifi, cellular, and cable modem link technologies, ACK decimation in middleboxes, and LRO and GRO in receiving hosts. The aggregation can happen in either direction, data or ACKs, but in either case the aggregation effect is visible to the sender in the ACK stream. Previously BBR's sending was often limited by cwnd under severe ACK aggregation/decimation because BBR sized the cwnd at 2*BDP. If packets were acked in bursts after long delays (e.g. one ACK acking 5*BDP after 5*RTT), BBR's sending was halted after sending 2*BDP over 2*RTT, leaving the bottleneck idle for potentially long periods. Note that loss-based congestion control does not have this issue because when facing aggregation it continues increasing cwnd after bursts of ACKs, growing cwnd until the buffer is full. To achieve good throughput in the presence of aggregation effects, this algorithm allows the BBR sender to put extra data in flight to keep the bottleneck utilized during silences in the ACK stream that it has evidence to suggest were caused by aggregation. A summary of the algorithm: when a burst of packets are acked by a stretched ACK or a burst of ACKs or both, BBR first estimates the expected amount of data that should have been acked, based on its estimated bandwidth. Then the surplus ("extra_acked") is recorded in a windowed-max filter to estimate the recent level of observed ACK aggregation. Then cwnd is increased by the ACK aggregation estimate. The larger cwnd avoids BBR being cwnd-limited in the face of ACK silences that recent history suggests were caused by aggregation. As a sanity check, the ACK aggregation degree is upper-bounded by the cwnd (at the time of measurement) and a global max of BW * 100ms. The algorithm is further described by the following presentation: https://datatracker.ietf.org/meeting/101/materials/slides-101-iccrg-an-update-on-bbr-work-at-google-00 In our internal testing, we observed a significant increase in BBR throughput (measured using netperf), in a basic wifi setup. - Host1 (sender on ethernet) -> AP -> Host2 (receiver on wifi) - 2.4 GHz -> BBR before: ~73 Mbps; BBR after: ~102 Mbps; CUBIC: ~100 Mbps - 5.0 GHz -> BBR before: ~362 Mbps; BBR after: ~593 Mbps; CUBIC: ~601 Mbps Also, this code is running globally on YouTube TCP connections and produced significant bandwidth increases for YouTube traffic. This is based on Ian Swett's max_ack_height_ algorithm from the QUIC BBR implementation. Signed-off-by: Priyaranjan Jha <priyarjha@google.com> Signed-off-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-24tcp_bbr: refactor bbr_target_cwnd() for general inflight provisioningPriyaranjan Jha
Because bbr_target_cwnd() is really a general-purpose BBR helper for computing some volume of inflight data as a function of the estimated BDP, refactor it into following helper functions: - bbr_bdp() - bbr_quantization_budget() - bbr_inflight() Signed-off-by: Priyaranjan Jha <priyarjha@google.com> Signed-off-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-24Merge tag 'linux-can-fixes-for-5.0-20190122' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can Marc Kleine-Budde says: ==================== pull-request: can 2019-01-22 this is a pull request of 4 patches for net/master. The first patch by is by Manfred Schlaegl and reverts a patch that caused wrong warning messages in certain use cases. The next patch is by Oliver Hartkopp for the bcm that adds sanity checks for the timer value before using it to detect potential interger overflows. The last two patches are for the flexcan driver, YueHaibing's patch fixes the the return value in the error path of the flexcan_setup_stop_mode() function. The second patch is by Uwe Kleine-König and fixes a NULL pointer deref on older flexcan cores in flexcan_chip_start(). ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-24sctp: set flow sport from saddr only when it's 0Xin Long
Now sctp_transport_pmtu() passes transport->saddr into .get_dst() to set flow sport from 'saddr'. However, transport->saddr is set only when transport->dst exists in sctp_transport_route(). If sctp_transport_pmtu() is called without transport->saddr set, like when transport->dst doesn't exists, the flow sport will be set to 0 from transport->saddr, which will cause a wrong route to be got. Commit 6e91b578bf3f ("sctp: re-use sctp_transport_pmtu in sctp_transport_route") made the issue be triggered more easily since sctp_transport_pmtu() would be called in sctp_transport_route() after that. In gerneral, fl4->fl4_sport should always be set to htons(asoc->base.bind_addr.port), unless transport->asoc doesn't exist in sctp_v4/6_get_dst(), which is the case: sctp_ootb_pkt_new() -> sctp_transport_route() For that, we can simply handle it by setting flow sport from saddr only when it's 0 in sctp_v4/6_get_dst(). Fixes: 6e91b578bf3f ("sctp: re-use sctp_transport_pmtu in sctp_transport_route") Reported-by: Ying Xu <yinxu@redhat.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-24sctp: set chunk transport correctly when it's a new asocXin Long
In the paths: sctp_sf_do_unexpected_init() -> sctp_make_init_ack() sctp_sf_do_dupcook_a/b()() -> sctp_sf_do_5_1D_ce() The new chunk 'retval' transport is set from the incoming chunk 'chunk' transport. However, 'retval' transport belong to the new asoc, which is a different one from 'chunk' transport's asoc. It will cause that the 'retval' chunk gets set with a wrong transport. Later when sending it and because of Commit b9fd683982c9 ("sctp: add sctp_packet_singleton"), sctp_packet_singleton() will set some fields, like vtag to 'retval' chunk from that wrong transport's asoc. This patch is to fix it by setting 'retval' transport correctly which belongs to the right asoc in sctp_make_init_ack() and sctp_sf_do_5_1D_ce(). Fixes: b9fd683982c9 ("sctp: add sctp_packet_singleton") Reported-by: Ying Xu <yinxu@redhat.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-24sctp: improve the events for sctp stream addingXin Long
This patch is to improve sctp stream adding events in 2 places: 1. In sctp_process_strreset_addstrm_out(), move up SCTP_MAX_STREAM and in stream allocation failure checks, as the adding has to succeed after reconf_timer stops for the in stream adding request retransmission. 3. In sctp_process_strreset_addstrm_in(), no event should be sent, as no in or out stream is added here. Fixes: 50a41591f110 ("sctp: implement receiver-side procedures for the Add Outgoing Streams Request Parameter") Fixes: c5c4ebb3ab87 ("sctp: implement receiver-side procedures for the Add Incoming Streams Request Parameter") Reported-by: Ying Xu <yinxu@redhat.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-24sctp: improve the events for sctp stream resetXin Long
This patch is to improve sctp stream reset events in 4 places: 1. In sctp_process_strreset_outreq(), the flag should always be set with SCTP_STREAM_RESET_INCOMING_SSN instead of OUTGOING, as receiver's in stream is reset here. 2. In sctp_process_strreset_outreq(), move up SCTP_STRRESET_ERR_WRONG_SSN check, as the reset has to succeed after reconf_timer stops for the in stream reset request retransmission. 3. In sctp_process_strreset_inreq(), no event should be sent, as no in or out stream is reset here. 4. In sctp_process_strreset_resp(), SCTP_STREAM_RESET_INCOMING_SSN or OUTGOING event should always be sent for stream reset requests, no matter it fails or succeeds to process the request. Fixes: 810544764536 ("sctp: implement receiver-side procedures for the Outgoing SSN Reset Request Parameter") Fixes: 16e1a91965b0 ("sctp: implement receiver-side procedures for the Incoming SSN Reset Request Parameter") Fixes: 11ae76e67a17 ("sctp: implement receiver-side procedures for the Reconf Response Parameter") Reported-by: Ying Xu <yinxu@redhat.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-24ip_tunnel: Make none-tunnel-dst tunnel port work with lwtunnelwenxu
ip l add dev tun type gretap key 1000 ip a a dev tun 10.0.0.1/24 Packets with tun-id 1000 can be recived by tun dev. But packet can't be sent through dev tun for non-tunnel-dst With this patch: tunnel-dst can be get through lwtunnel like beflow: ip r a 10.0.0.7 encap ip dst 172.168.0.11 dev tun Signed-off-by: wenxu <wenxu@ucloud.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-25xsk: add sock_diag interface for AF_XDPBjörn Töpel
This patch adds the sock_diag interface for querying sockets from user space. Tools like iproute2 ss(8) can use this interface to list open AF_XDP sockets. The user-space ABI is defined in linux/xdp_diag.h and includes netlink request and response structs. The request can query sockets and the response contains socket information about the rings, umems, inode and more. Signed-off-by: Björn Töpel <bjorn.topel@intel.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-01-25xsk: add id to umemBjörn Töpel
This commit adds an id to the umem structure. The id uniquely identifies a umem instance, and will be exposed to user-space via the socket monitoring interface. Signed-off-by: Björn Töpel <bjorn.topel@intel.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-28 19:06:58 +0000