summaryrefslogtreecommitdiff
path: root/net
AgeCommit message (Collapse)Author
2020-01-19Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds
Pull networking fixes from David Miller: 1) Fix non-blocking connect() in x25, from Martin Schiller. 2) Fix spurious decryption errors in kTLS, from Jakub Kicinski. 3) Netfilter use-after-free in mtype_destroy(), from Cong Wang. 4) Limit size of TSO packets properly in lan78xx driver, from Eric Dumazet. 5) r8152 probe needs an endpoint sanity check, from Johan Hovold. 6) Prevent looping in tcp_bpf_unhash() during sockmap/tls free, from John Fastabend. 7) hns3 needs short frames padded on transmit, from Yunsheng Lin. 8) Fix netfilter ICMP header corruption, from Eyal Birger. 9) Fix soft lockup when low on memory in hns3, from Yonglong Liu. 10) Fix NTUPLE firmware command failures in bnxt_en, from Michael Chan. 11) Fix memory leak in act_ctinfo, from Eric Dumazet. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (91 commits) cxgb4: reject overlapped queues in TC-MQPRIO offload cxgb4: fix Tx multi channel port rate limit net: sched: act_ctinfo: fix memory leak bnxt_en: Do not treat DSN (Digital Serial Number) read failure as fatal. bnxt_en: Fix ipv6 RFS filter matching logic. bnxt_en: Fix NTUPLE firmware command failures. net: systemport: Fixed queue mapping in internal ring map net: dsa: bcm_sf2: Configure IMP port for 2Gb/sec net: dsa: sja1105: Don't error out on disabled ports with no phy-mode net: phy: dp83867: Set FORCE_LINK_GOOD to default after reset net: hns: fix soft lockup when there is not enough memory net: avoid updating qdisc_xmit_lock_key in netdev_update_lockdep_key() net/sched: act_ife: initalize ife->metalist earlier netfilter: nat: fix ICMP header corruption on ICMP errors net: wan: lapbether.c: Use built-in RCU list checking netfilter: nf_tables: fix flowtable list del corruption netfilter: nf_tables: fix memory leak in nf_tables_parse_netdev_hooks() netfilter: nf_tables: remove WARN and add NLA_STRING upper limits netfilter: nft_tunnel: ERSPAN_VERSION must not be null netfilter: nft_tunnel: fix null-attribute check ...
2020-01-19net: sched: act_ctinfo: fix memory leakEric Dumazet
Implement a cleanup method to properly free ci->params BUG: memory leak unreferenced object 0xffff88811746e2c0 (size 64): comm "syz-executor617", pid 7106, jiffies 4294943055 (age 14.250s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ c0 34 60 84 ff ff ff ff 00 00 00 00 00 00 00 00 .4`............. backtrace: [<0000000015aa236f>] kmemleak_alloc_recursive include/linux/kmemleak.h:43 [inline] [<0000000015aa236f>] slab_post_alloc_hook mm/slab.h:586 [inline] [<0000000015aa236f>] slab_alloc mm/slab.c:3320 [inline] [<0000000015aa236f>] kmem_cache_alloc_trace+0x145/0x2c0 mm/slab.c:3549 [<000000002c946bd1>] kmalloc include/linux/slab.h:556 [inline] [<000000002c946bd1>] kzalloc include/linux/slab.h:670 [inline] [<000000002c946bd1>] tcf_ctinfo_init+0x21a/0x530 net/sched/act_ctinfo.c:236 [<0000000086952cca>] tcf_action_init_1+0x400/0x5b0 net/sched/act_api.c:944 [<000000005ab29bf8>] tcf_action_init+0x135/0x1c0 net/sched/act_api.c:1000 [<00000000392f56f9>] tcf_action_add+0x9a/0x200 net/sched/act_api.c:1410 [<0000000088f3c5dd>] tc_ctl_action+0x14d/0x1bb net/sched/act_api.c:1465 [<000000006b39d986>] rtnetlink_rcv_msg+0x178/0x4b0 net/core/rtnetlink.c:5424 [<00000000fd6ecace>] netlink_rcv_skb+0x61/0x170 net/netlink/af_netlink.c:2477 [<0000000047493d02>] rtnetlink_rcv+0x1d/0x30 net/core/rtnetlink.c:5442 [<00000000bdcf8286>] netlink_unicast_kernel net/netlink/af_netlink.c:1302 [inline] [<00000000bdcf8286>] netlink_unicast+0x223/0x310 net/netlink/af_netlink.c:1328 [<00000000fc5b92d9>] netlink_sendmsg+0x2c0/0x570 net/netlink/af_netlink.c:1917 [<00000000da84d076>] sock_sendmsg_nosec net/socket.c:639 [inline] [<00000000da84d076>] sock_sendmsg+0x54/0x70 net/socket.c:659 [<0000000042fb2eee>] ____sys_sendmsg+0x2d0/0x300 net/socket.c:2330 [<000000008f23f67e>] ___sys_sendmsg+0x8a/0xd0 net/socket.c:2384 [<00000000d838e4f6>] __sys_sendmsg+0x80/0xf0 net/socket.c:2417 [<00000000289a9cb1>] __do_sys_sendmsg net/socket.c:2426 [inline] [<00000000289a9cb1>] __se_sys_sendmsg net/socket.c:2424 [inline] [<00000000289a9cb1>] __x64_sys_sendmsg+0x23/0x30 net/socket.c:2424 Fixes: 24ec483cec98 ("net: sched: Introduce act_ctinfo action") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Cc: Kevin 'ldir' Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk> Cc: Cong Wang <xiyou.wangcong@gmail.com> Cc: Toke Høiland-Jørgensen <toke@redhat.com> Acked-by: Kevin 'ldir' Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-17net: avoid updating qdisc_xmit_lock_key in netdev_update_lockdep_key()Cong Wang
syzbot reported some bogus lockdep warnings, for example bad unlock balance in sch_direct_xmit(). They are due to a race condition between slow path and fast path, that is qdisc_xmit_lock_key gets re-registered in netdev_update_lockdep_key() on slow path, while we could still acquire the queue->_xmit_lock on fast path in this small window: CPU A CPU B __netif_tx_lock(); lockdep_unregister_key(qdisc_xmit_lock_key); __netif_tx_unlock(); lockdep_register_key(qdisc_xmit_lock_key); In fact, unlike the addr_list_lock which has to be reordered when the master/slave device relationship changes, queue->_xmit_lock is only acquired on fast path and only when NETIF_F_LLTX is not set, so there is likely no nested locking for it. Therefore, we can just get rid of re-registration of qdisc_xmit_lock_key. Reported-by: syzbot+4ec99438ed7450da6272@syzkaller.appspotmail.com Fixes: ab92d68fc22f ("net: core: add generic lockdep keys") Cc: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Acked-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-17net/sched: act_ife: initalize ife->metalist earlierEric Dumazet
It seems better to init ife->metalist earlier in tcf_ife_init() to avoid the following crash : kasan: CONFIG_KASAN_INLINE enabled kasan: GPF could be caused by NULL-ptr deref or user memory access general protection fault: 0000 [#1] PREEMPT SMP KASAN CPU: 0 PID: 10483 Comm: syz-executor216 Not tainted 5.5.0-rc5-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:_tcf_ife_cleanup net/sched/act_ife.c:412 [inline] RIP: 0010:tcf_ife_cleanup+0x6e/0x400 net/sched/act_ife.c:431 Code: 48 c1 ea 03 80 3c 02 00 0f 85 94 03 00 00 49 8b bd f8 00 00 00 48 b8 00 00 00 00 00 fc ff df 4c 8d 67 e8 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 5c 03 00 00 48 bb 00 00 00 00 00 fc ff df 48 8b RSP: 0018:ffffc90001dc6d00 EFLAGS: 00010246 RAX: dffffc0000000000 RBX: ffffffff864619c0 RCX: ffffffff815bfa09 RDX: 0000000000000000 RSI: 0000000000000004 RDI: 0000000000000000 RBP: ffffc90001dc6d50 R08: 0000000000000004 R09: fffff520003b8d8e R10: fffff520003b8d8d R11: 0000000000000003 R12: ffffffffffffffe8 R13: ffff8880a79fc000 R14: ffff88809aba0e00 R15: 0000000000000000 FS: 0000000001b51880(0000) GS:ffff8880ae800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000563f52cce140 CR3: 0000000093541000 CR4: 00000000001406f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: tcf_action_cleanup+0x62/0x1b0 net/sched/act_api.c:119 __tcf_action_put+0xfa/0x130 net/sched/act_api.c:135 __tcf_idr_release net/sched/act_api.c:165 [inline] __tcf_idr_release+0x59/0xf0 net/sched/act_api.c:145 tcf_idr_release include/net/act_api.h:171 [inline] tcf_ife_init+0x97c/0x1870 net/sched/act_ife.c:616 tcf_action_init_1+0x6b6/0xa40 net/sched/act_api.c:944 tcf_action_init+0x21a/0x330 net/sched/act_api.c:1000 tcf_action_add+0xf5/0x3b0 net/sched/act_api.c:1410 tc_ctl_action+0x390/0x488 net/sched/act_api.c:1465 rtnetlink_rcv_msg+0x45e/0xaf0 net/core/rtnetlink.c:5424 netlink_rcv_skb+0x177/0x450 net/netlink/af_netlink.c:2477 rtnetlink_rcv+0x1d/0x30 net/core/rtnetlink.c:5442 netlink_unicast_kernel net/netlink/af_netlink.c:1302 [inline] netlink_unicast+0x58c/0x7d0 net/netlink/af_netlink.c:1328 netlink_sendmsg+0x91c/0xea0 net/netlink/af_netlink.c:1917 sock_sendmsg_nosec net/socket.c:639 [inline] sock_sendmsg+0xd7/0x130 net/socket.c:659 ____sys_sendmsg+0x753/0x880 net/socket.c:2330 ___sys_sendmsg+0x100/0x170 net/socket.c:2384 __sys_sendmsg+0x105/0x1d0 net/socket.c:2417 __do_sys_sendmsg net/socket.c:2426 [inline] __se_sys_sendmsg net/socket.c:2424 [inline] __x64_sys_sendmsg+0x78/0xb0 net/socket.c:2424 do_syscall_64+0xfa/0x790 arch/x86/entry/common.c:294 entry_SYSCALL_64_after_hwframe+0x49/0xbe Fixes: 11a94d7fd80f ("net/sched: act_ife: validate the control action inside init()") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Cc: Davide Caratti <dcaratti@redhat.com> Reviewed-by: Davide Caratti <dcaratti@redhat.com> Acked-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-17Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nfDavid S. Miller
Pablo Neira Ayuso says: ==================== Netfilter updates for net The following patchset contains Netfilter fixes for net: 1) Fix use-after-free in ipset bitmap destroy path, from Cong Wang. 2) Missing init netns in entry cleanup path of arp_tables, from Florian Westphal. 3) Fix WARN_ON in set destroy path due to missing cleanup on transaction error. 4) Incorrect netlink sanity check in tunnel, from Florian Westphal. 5) Missing sanity check for erspan version netlink attribute, also from Florian. 6) Remove WARN in nft_request_module() that can be triggered from userspace, from Florian Westphal. 7) Memleak in NFTA_HOOK_DEVS netlink parser, from Dan Carpenter. 8) List poison from commit path for flowtables that are added and deleted in the same batch, from Florian Westphal. 9) Fix NAT ICMP packet corruption, from Eyal Birger. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-16netfilter: nat: fix ICMP header corruption on ICMP errorsEyal Birger
Commit 8303b7e8f018 ("netfilter: nat: fix spurious connection timeouts") made nf_nat_icmp_reply_translation() use icmp_manip_pkt() as the l4 manipulation function for the outer packet on ICMP errors. However, icmp_manip_pkt() assumes the packet has an 'id' field which is not correct for all types of ICMP messages. This is not correct for ICMP error packets, and leads to bogus bytes being written the ICMP header, which can be wrongfully regarded as 'length' bytes by RFC 4884 compliant receivers. Fix by assigning the 'id' field only for ICMP messages that have this semantic. Reported-by: Shmulik Ladkani <shmulik.ladkani@gmail.com> Fixes: 8303b7e8f018 ("netfilter: nat: fix spurious connection timeouts") Signed-off-by: Eyal Birger <eyal.birger@gmail.com> Acked-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2020-01-16netfilter: nf_tables: fix flowtable list del corruptionFlorian Westphal
syzbot reported following crash: list_del corruption, ffff88808c9bb000->prev is LIST_POISON2 (dead000000000122) [..] Call Trace: __list_del_entry include/linux/list.h:131 [inline] list_del_rcu include/linux/rculist.h:148 [inline] nf_tables_commit+0x1068/0x3b30 net/netfilter/nf_tables_api.c:7183 [..] The commit transaction list has: NFT_MSG_NEWTABLE NFT_MSG_NEWFLOWTABLE NFT_MSG_DELFLOWTABLE NFT_MSG_DELTABLE A missing generation check during DELTABLE processing causes it to queue the DELFLOWTABLE operation a second time, so we corrupt the list here: case NFT_MSG_DELFLOWTABLE: list_del_rcu(&nft_trans_flowtable(trans)->list); nf_tables_flowtable_notify(&trans->ctx, because we have two different DELFLOWTABLE transactions for the same flowtable. We then call list_del_rcu() twice for the same flowtable->list. The object handling seems to suffer from the same bug so add a generation check too and only queue delete transactions for flowtables/objects that are still active in the next generation. Reported-by: syzbot+37a6804945a3a13b1572@syzkaller.appspotmail.com Fixes: 3b49e2e94e6eb ("netfilter: nf_tables: add flow table netlink frontend") Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2020-01-16netfilter: nf_tables: fix memory leak in nf_tables_parse_netdev_hooks()Dan Carpenter
Syzbot detected a leak in nf_tables_parse_netdev_hooks(). If the hook already exists, then the error handling doesn't free the newest "hook". Reported-by: syzbot+f9d4095107fc8749c69c@syzkaller.appspotmail.com Fixes: b75a3e8371bc ("netfilter: nf_tables: allow netdevice to be used only once per flowtable") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2020-01-16netfilter: nf_tables: remove WARN and add NLA_STRING upper limitsFlorian Westphal
This WARN can trigger because some of the names fed to the module autoload function can be of arbitrary length. Remove the WARN and add limits for all NLA_STRING attributes. Reported-by: syzbot+0e63ae76d117ae1c3a01@syzkaller.appspotmail.com Fixes: 452238e8d5ffd8 ("netfilter: nf_tables: add and use helper for module autoload") Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2020-01-16netfilter: nft_tunnel: ERSPAN_VERSION must not be nullFlorian Westphal
Fixes: af308b94a2a4a5 ("netfilter: nf_tables: add tunnel support") Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2020-01-16netfilter: nft_tunnel: fix null-attribute checkFlorian Westphal
else we get null deref when one of the attributes is missing, both must be non-null. Reported-by: syzbot+76d0b80493ac881ff77b@syzkaller.appspotmail.com Fixes: aaecfdb5c5dd8ba ("netfilter: nf_tables: match on tunnel metadata") Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2020-01-16netfilter: nf_tables: store transaction list locally while requesting modulePablo Neira Ayuso
This patch fixes a WARN_ON in nft_set_destroy() due to missing set reference count drop from the preparation phase. This is triggered by the module autoload path. Do not exercise the abort path from nft_request_module() while preparation phase cleaning up is still pending. WARNING: CPU: 3 PID: 3456 at net/netfilter/nf_tables_api.c:3740 nft_set_destroy+0x45/0x50 [nf_tables] [...] CPU: 3 PID: 3456 Comm: nft Not tainted 5.4.6-arch3-1 #1 RIP: 0010:nft_set_destroy+0x45/0x50 [nf_tables] Code: e8 30 eb 83 c6 48 8b 85 80 00 00 00 48 8b b8 90 00 00 00 e8 dd 6b d7 c5 48 8b 7d 30 e8 24 dd eb c5 48 89 ef 5d e9 6b c6 e5 c5 <0f> 0b c3 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 8b 7f 10 e9 52 RSP: 0018:ffffac4f43e53700 EFLAGS: 00010202 RAX: 0000000000000001 RBX: ffff99d63a154d80 RCX: 0000000001f88e03 RDX: 0000000001f88c03 RSI: ffff99d6560ef0c0 RDI: ffff99d63a101200 RBP: ffff99d617721de0 R08: 0000000000000000 R09: 0000000000000318 R10: 00000000f0000000 R11: 0000000000000001 R12: ffffffff880fabf0 R13: dead000000000122 R14: dead000000000100 R15: ffff99d63a154d80 FS: 00007ff3dbd5b740(0000) GS:ffff99d6560c0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00001cb5de6a9000 CR3: 000000016eb6a004 CR4: 00000000001606e0 Call Trace: __nf_tables_abort+0x3e3/0x6d0 [nf_tables] nft_request_module+0x6f/0x110 [nf_tables] nft_expr_type_request_module+0x28/0x50 [nf_tables] nf_tables_expr_parse+0x198/0x1f0 [nf_tables] nft_expr_init+0x3b/0xf0 [nf_tables] nft_dynset_init+0x1e2/0x410 [nf_tables] nf_tables_newrule+0x30a/0x930 [nf_tables] nfnetlink_rcv_batch+0x2a0/0x640 [nfnetlink] nfnetlink_rcv+0x125/0x171 [nfnetlink] netlink_unicast+0x179/0x210 netlink_sendmsg+0x208/0x3d0 sock_sendmsg+0x5e/0x60 ____sys_sendmsg+0x21b/0x290 Update comment on the code to describe the new behaviour. Reported-by: Marco Oliverio <marco.oliverio@tanaza.com> Fixes: 452238e8d5ff ("netfilter: nf_tables: add and use helper for module autoload") Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2020-01-16net: dsa: tag_qca: fix doubled Tx statisticsAlexander Lobakin
DSA subsystem takes care of netdev statistics since commit 4ed70ce9f01c ("net: dsa: Refactor transmit path to eliminate duplication"), so any accounting inside tagger callbacks is redundant and can lead to messing up the stats. This bug is present in Qualcomm tagger since day 0. Fixes: cafdc45c949b ("net-next: dsa: add Qualcomm tag RX/TX handler") Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Alexander Lobakin <alobakin@dlink.ru> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-16net: dsa: tag_gswip: fix typo in tagger nameAlexander Lobakin
The correct name is GSWIP (Gigabit Switch IP). Typo was introduced in 875138f81d71a ("dsa: Move tagger name into its ops structure") while moving tagger names to their structures. Fixes: 875138f81d71a ("dsa: Move tagger name into its ops structure") Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Alexander Lobakin <alobakin@dlink.ru> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-16Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfDavid S. Miller
Daniel Borkmann says: ==================== pull-request: bpf 2020-01-15 The following pull-request contains BPF updates for your *net* tree. We've added 12 non-merge commits during the last 9 day(s) which contain a total of 13 files changed, 95 insertions(+), 43 deletions(-). The main changes are: 1) Fix refcount leak for TCP time wait and request sockets for socket lookup related BPF helpers, from Lorenz Bauer. 2) Fix wrong verification of ARSH instruction under ALU32, from Daniel Borkmann. 3) Batch of several sockmap and related TLS fixes found while operating more complex BPF programs with Cilium and OpenSSL, from John Fastabend. 4) Fix sockmap to read psock's ingress_msg queue before regular sk_receive_queue() to avoid purging data upon teardown, from Lingpeng Chen. 5) Fix printing incorrect pointer in bpftool's btf_dump_ptr() in order to properly dump a BPF map's value with BTF, from Martin KaFai Lau. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-15bpf: Sockmap/tls, fix pop data with SK_DROP return codeJohn Fastabend
When user returns SK_DROP we need to reset the number of copied bytes to indicate to the user the bytes were dropped and not sent. If we don't reset the copied arg sendmsg will return as if those bytes were copied giving the user a positive return value. This works as expected today except in the case where the user also pops bytes. In the pop case the sg.size is reduced but we don't correctly account for this when copied bytes is reset. The popped bytes are not accounted for and we return a small positive value potentially confusing the user. The reason this happens is due to a typo where we do the wrong comparison when accounting for pop bytes. In this fix notice the if/else is not needed and that we have a similar problem if we push data except its not visible to the user because if delta is larger the sg.size we return a negative value so it appears as an error regardless. Fixes: 7246d8ed4dcce ("bpf: helper to pop data from messages") Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Jonathan Lemon <jonathan.lemon@gmail.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/bpf/20200111061206.8028-9-john.fastabend@gmail.com
2020-01-15bpf: Sockmap/tls, skmsg can have wrapped skmsg that needs extra chainingJohn Fastabend
Its possible through a set of push, pop, apply helper calls to construct a skmsg, which is just a ring of scatterlist elements, with the start value larger than the end value. For example, end start |_0_|_1_| ... |_n_|_n+1_| Where end points at 1 and start points and n so that valid elements is the set {n, n+1, 0, 1}. Currently, because we don't build the correct chain only {n, n+1} will be sent. This adds a check and sg_chain call to correctly submit the above to the crypto and tls send path. Fixes: d3b18ad31f93d ("tls: add bpf support to sk_msg handling") Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Jonathan Lemon <jonathan.lemon@gmail.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/bpf/20200111061206.8028-8-john.fastabend@gmail.com
2020-01-15bpf: Sockmap/tls, tls_sw can create a plaintext buf > encrypt bufJohn Fastabend
It is possible to build a plaintext buffer using push helper that is larger than the allocated encrypt buffer. When this record is pushed to crypto layers this can result in a NULL pointer dereference because the crypto API expects the encrypt buffer is large enough to fit the plaintext buffer. Kernel splat below. To resolve catch the cases this can happen and split the buffer into two records to send individually. Unfortunately, there is still one case to handle where the split creates a zero sized buffer. In this case we merge the buffers and unmark the split. This happens when apply is zero and user pushed data beyond encrypt buffer. This fixes the original case as well because the split allocated an encrypt buffer larger than the plaintext buffer and the merge simply moves the pointers around so we now have a reference to the new (larger) encrypt buffer. Perhaps its not ideal but it seems the best solution for a fixes branch and avoids handling these two cases, (a) apply that needs split and (b) non apply case. The are edge cases anyways so optimizing them seems not necessary unless someone wants later in next branches. [ 306.719107] BUG: kernel NULL pointer dereference, address: 0000000000000008 [...] [ 306.747260] RIP: 0010:scatterwalk_copychunks+0x12f/0x1b0 [...] [ 306.770350] Call Trace: [ 306.770956] scatterwalk_map_and_copy+0x6c/0x80 [ 306.772026] gcm_enc_copy_hash+0x4b/0x50 [ 306.772925] gcm_hash_crypt_remain_continue+0xef/0x110 [ 306.774138] gcm_hash_crypt_continue+0xa1/0xb0 [ 306.775103] ? gcm_hash_crypt_continue+0xa1/0xb0 [ 306.776103] gcm_hash_assoc_remain_continue+0x94/0xa0 [ 306.777170] gcm_hash_assoc_continue+0x9d/0xb0 [ 306.778239] gcm_hash_init_continue+0x8f/0xa0 [ 306.779121] gcm_hash+0x73/0x80 [ 306.779762] gcm_encrypt_continue+0x6d/0x80 [ 306.780582] crypto_gcm_encrypt+0xcb/0xe0 [ 306.781474] crypto_aead_encrypt+0x1f/0x30 [ 306.782353] tls_push_record+0x3b9/0xb20 [tls] [ 306.783314] ? sk_psock_msg_verdict+0x199/0x300 [ 306.784287] bpf_exec_tx_verdict+0x3f2/0x680 [tls] [ 306.785357] tls_sw_sendmsg+0x4a3/0x6a0 [tls] test_sockmap test signature to trigger bug, [TEST]: (1, 1, 1, sendmsg, pass,redir,start 1,end 2,pop (1,2),ktls,): Fixes: d3b18ad31f93d ("tls: add bpf support to sk_msg handling") Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Jonathan Lemon <jonathan.lemon@gmail.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/bpf/20200111061206.8028-7-john.fastabend@gmail.com
2020-01-15bpf: Sockmap/tls, msg_push_data may leave end mark in placeJohn Fastabend
Leaving an incorrect end mark in place when passing to crypto layer will cause crypto layer to stop processing data before all data is encrypted. To fix clear the end mark on push data instead of expecting users of the helper to clear the mark value after the fact. This happens when we push data into the middle of a skmsg and have room for it so we don't do a set of copies that already clear the end flag. Fixes: 6fff607e2f14b ("bpf: sk_msg program helper bpf_msg_push_data") Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Song Liu <songliubraving@fb.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/bpf/20200111061206.8028-6-john.fastabend@gmail.com
2020-01-15bpf: Sockmap, skmsg helper overestimates push, pull, and pop boundsJohn Fastabend
In the push, pull, and pop helpers operating on skmsg objects to make data writable or insert/remove data we use this bounds check to ensure specified data is valid, /* Bounds checks: start and pop must be inside message */ if (start >= offset + l || last >= msg->sg.size) return -EINVAL; The problem here is offset has already included the length of the current element the 'l' above. So start could be past the end of the scatterlist element in the case where start also points into an offset on the last skmsg element. To fix do the accounting slightly different by adding the length of the previous entry to offset at the start of the iteration. And ensure its initialized to zero so that the first iteration does nothing. Fixes: 604326b41a6fb ("bpf, sockmap: convert to generic sk_msg interface") Fixes: 6fff607e2f14b ("bpf: sk_msg program helper bpf_msg_push_data") Fixes: 7246d8ed4dcce ("bpf: helper to pop data from messages") Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Song Liu <songliubraving@fb.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/bpf/20200111061206.8028-5-john.fastabend@gmail.com
2020-01-15bpf: Sockmap/tls, push write_space updates through ulp updatesJohn Fastabend
When sockmap sock with TLS enabled is removed we cleanup bpf/psock state and call tcp_update_ulp() to push updates to TLS ULP on top. However, we don't push the write_space callback up and instead simply overwrite the op with the psock stored previous op. This may or may not be correct so to ensure we don't overwrite the TLS write space hook pass this field to the ULP and have it fixup the ctx. This completes a previous fix that pushed the ops through to the ULP but at the time missed doing this for write_space, presumably because write_space TLS hook was added around the same time. Fixes: 95fa145479fbc ("bpf: sockmap/tls, close can race with map free") Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com> Acked-by: Jonathan Lemon <jonathan.lemon@gmail.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/bpf/20200111061206.8028-4-john.fastabend@gmail.com
2020-01-15bpf: Sockmap, ensure sock lock held during tear downJohn Fastabend
The sock_map_free() and sock_hash_free() paths used to delete sockmap and sockhash maps walk the maps and destroy psock and bpf state associated with the socks in the map. When done the socks no longer have BPF programs attached and will function normally. This can happen while the socks in the map are still "live" meaning data may be sent/received during the walk. Currently, though we don't take the sock_lock when the psock and bpf state is removed through this path. Specifically, this means we can be writing into the ops structure pointers such as sendmsg, sendpage, recvmsg, etc. while they are also being called from the networking side. This is not safe, we never used proper READ_ONCE/WRITE_ONCE semantics here if we believed it was safe. Further its not clear to me its even a good idea to try and do this on "live" sockets while networking side might also be using the socket. Instead of trying to reason about using the socks from both sides lets realize that every use case I'm aware of rarely deletes maps, in fact kubernetes/Cilium case builds map at init and never tears it down except on errors. So lets do the simple fix and grab sock lock. This patch wraps sock deletes from maps in sock lock and adds some annotations so we catch any other cases easier. Fixes: 604326b41a6fb ("bpf, sockmap: convert to generic sk_msg interface") Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Song Liu <songliubraving@fb.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/bpf/20200111061206.8028-3-john.fastabend@gmail.com
2020-01-15Merge tag 'batadv-net-for-davem-20200114' of git://git.open-mesh.org/linux-mergeDavid S. Miller
Simon Wunderlich says: ==================== Here is a batman-adv bugfix: - Fix DAT candidate selection on little endian systems, by Sven Eckelmann ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-15tcp: fix marked lost packets not being retransmittedPengcheng Yang
When the packet pointed to by retransmit_skb_hint is unlinked by ACK, retransmit_skb_hint will be set to NULL in tcp_clean_rtx_queue(). If packet loss is detected at this time, retransmit_skb_hint will be set to point to the current packet loss in tcp_verify_retransmit_hint(), then the packets that were previously marked lost but not retransmitted due to the restriction of cwnd will be skipped and cannot be retransmitted. To fix this, when retransmit_skb_hint is NULL, retransmit_skb_hint can be reset only after all marked lost packets are retransmitted (retrans_out >= lost_out), otherwise we need to traverse from tcp_rtx_queue_head in tcp_xmit_retransmit_queue(). Packetdrill to demonstrate: // Disable RACK and set max_reordering to keep things simple 0 `sysctl -q net.ipv4.tcp_recovery=0` +0 `sysctl -q net.ipv4.tcp_max_reordering=3` // Establish a connection +0 socket(..., SOCK_STREAM, IPPROTO_TCP) = 3 +0 setsockopt(3, SOL_SOCKET, SO_REUSEADDR, [1], 4) = 0 +0 bind(3, ..., ...) = 0 +0 listen(3, 1) = 0 +.1 < S 0:0(0) win 32792 <mss 1000,sackOK,nop,nop,nop,wscale 7> +0 > S. 0:0(0) ack 1 <...> +.01 < . 1:1(0) ack 1 win 257 +0 accept(3, ..., ...) = 4 // Send 8 data segments +0 write(4, ..., 8000) = 8000 +0 > P. 1:8001(8000) ack 1 // Enter recovery and 1:3001 is marked lost +.01 < . 1:1(0) ack 1 win 257 <sack 3001:4001,nop,nop> +0 < . 1:1(0) ack 1 win 257 <sack 5001:6001 3001:4001,nop,nop> +0 < . 1:1(0) ack 1 win 257 <sack 5001:7001 3001:4001,nop,nop> // Retransmit 1:1001, now retransmit_skb_hint points to 1001:2001 +0 > . 1:1001(1000) ack 1 // 1001:2001 was ACKed causing retransmit_skb_hint to be set to NULL +.01 < . 1:1(0) ack 2001 win 257 <sack 5001:8001 3001:4001,nop,nop> // Now retransmit_skb_hint points to 4001:5001 which is now marked lost // BUG: 2001:3001 was not retransmitted +0 > . 2001:3001(1000) ack 1 Signed-off-by: Pengcheng Yang <yangpc@wangsu.com> Acked-by: Neal Cardwell <ncardwell@google.com> Tested-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-15Merge tag 'mac80211-for-net-2020-01-15' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211 Johannes Berg says: ==================== A few fixes: * -O3 enablement fallout, thanks to Arnd who ran this * fixes for a few leaks, thanks to Felix * channel 12 regulatory fix for custom regdomains * check for a crash reported by syzbot (NULL function is called on drivers that don't have it) * fix TKIP replay protection after setup with some APs (from Jouni) * restrict obtaining some mesh data to avoid WARN_ONs * fix deadlocks with auto-disconnect (socket owner) * fix radar detection events with multiple devices ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-15cfg80211: fix page refcount issue in A-MSDU decapFelix Fietkau
The fragments attached to a skb can be part of a compound page. In that case, page_ref_inc will increment the refcount for the wrong page. Fix this by using get_page instead, which calls page_ref_inc on the compound head and also checks for overflow. Fixes: 2b67f944f88c ("cfg80211: reuse existing page fragments in A-MSDU rx") Cc: stable@vger.kernel.org Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20200113182107.20461-1-nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-01-15cfg80211: check for set_wiphy_paramsJohannes Berg
Check if set_wiphy_params is assigned and return an error if not, some drivers (e.g. virt_wifi where syzbot reported it) don't have it. Reported-by: syzbot+e8a797964a4180eb57d5@syzkaller.appspotmail.com Reported-by: syzbot+34b582cf32c1db008f8e@syzkaller.appspotmail.com Signed-off-by: Johannes Berg <johannes.berg@intel.com> Link: https://lore.kernel.org/r/20200113125358.ac07f276efff.Ibd85ee1b12e47b9efb00a2adc5cd3fac50da791a@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-01-15cfg80211: fix memory leak in cfg80211_cqm_rssi_updateFelix Fietkau
The per-tid statistics need to be released after the call to rdev_get_station Cc: stable@vger.kernel.org Fixes: 8689c051a201 ("cfg80211: dynamically allocate per-tid stats for station info") Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20200108170630.33680-2-nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-01-15cfg80211: fix memory leak in nl80211_probe_mesh_linkFelix Fietkau
The per-tid statistics need to be released after the call to rdev_get_station Cc: stable@vger.kernel.org Fixes: 5ab92e7fe49a ("cfg80211: add support to probe unexercised mesh link") Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20200108170630.33680-1-nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-01-15cfg80211: fix deadlocks in autodisconnect workMarkus Theil
Use methods which do not try to acquire the wdev lock themselves. Cc: stable@vger.kernel.org Fixes: 37b1c004685a3 ("cfg80211: Support all iftypes in autodisconnect_wk") Signed-off-by: Markus Theil <markus.theil@tu-ilmenau.de> Link: https://lore.kernel.org/r/20200108115536.2262-1-markus.theil@tu-ilmenau.de Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-01-15wireless: wext: avoid gcc -O3 warningArnd Bergmann
After the introduction of CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE_O3, the wext code produces a bogus warning: In function 'iw_handler_get_iwstats', inlined from 'ioctl_standard_call' at net/wireless/wext-core.c:1015:9, inlined from 'wireless_process_ioctl' at net/wireless/wext-core.c:935:10, inlined from 'wext_ioctl_dispatch.part.8' at net/wireless/wext-core.c:986:8, inlined from 'wext_handle_ioctl': net/wireless/wext-core.c:671:3: error: argument 1 null where non-null expected [-Werror=nonnull] memcpy(extra, stats, sizeof(struct iw_statistics)); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ In file included from arch/x86/include/asm/string.h:5, net/wireless/wext-core.c: In function 'wext_handle_ioctl': arch/x86/include/asm/string_64.h:14:14: note: in a call to function 'memcpy' declared here The problem is that ioctl_standard_call() sometimes calls the handler with a NULL argument that would cause a problem for iw_handler_get_iwstats. However, iw_handler_get_iwstats never actually gets called that way. Marking that function as noinline avoids the warning and leads to slightly smaller object code as well. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20200107200741.3588770-1-arnd@arndb.de Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-01-15mac80211: Fix TKIP replay protection immediately after key setupJouni Malinen
TKIP replay protection was skipped for the very first frame received after a new key is configured. While this is potentially needed to avoid dropping a frame in some cases, this does leave a window for replay attacks with group-addressed frames at the station side. Any earlier frame sent by the AP using the same key would be accepted as a valid frame and the internal RSC would then be updated to the TSC from that frame. This would allow multiple previously transmitted group-addressed frames to be replayed until the next valid new group-addressed frame from the AP is received by the station. Fix this by limiting the no-replay-protection exception to apply only for the case where TSC=0, i.e., when this is for the very first frame protected using the new key, and the local RSC had not been set to a higher value when configuring the key (which may happen with GTK). Signed-off-by: Jouni Malinen <j@w1.fi> Link: https://lore.kernel.org/r/20200107153545.10934-1-j@w1.fi Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-01-15cfg80211: Fix radar event during another phy CACOrr Mazor
In case a radar event of CAC_FINISHED or RADAR_DETECTED happens during another phy is during CAC we might need to cancel that CAC. If we got a radar in a channel that another phy is now doing CAC on then the CAC should be canceled there. If, for example, 2 phys doing CAC on the same channels, or on comptable channels, once on of them will finish his CAC the other might need to cancel his CAC, since it is no longer relevant. To fix that the commit adds an callback and implement it in mac80211 to end CAC. This commit also adds a call to said callback if after a radar event we see the CAC is no longer relevant Signed-off-by: Orr Mazor <Orr.Mazor@tandemg.com> Reviewed-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com> Link: https://lore.kernel.org/r/20191222145449.15792-1-Orr.Mazor@tandemg.com [slightly reformat/reword commit message] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-01-15wireless: fix enabling channel 12 for custom regulatory domainGanapathi Bhat
Commit e33e2241e272 ("Revert "cfg80211: Use 5MHz bandwidth by default when checking usable channels"") fixed a broken regulatory (leaving channel 12 open for AP where not permitted). Apply a similar fix to custom regulatory domain processing. Signed-off-by: Cathy Luo <xiaohua.luo@nxp.com> Signed-off-by: Ganapathi Bhat <ganapathi.bhat@nxp.com> Link: https://lore.kernel.org/r/1576836859-8945-1-git-send-email-ganapathi.bhat@nxp.com [reword commit message, fix coding style, add a comment] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-01-14hv_sock: Remove the accept port restrictionSunil Muthuswamy
Currently, hv_sock restricts the port the guest socket can accept connections on. hv_sock divides the socket port namespace into two parts for server side (listening socket), 0-0x7FFFFFFF & 0x80000000-0xFFFFFFFF (there are no restrictions on client port namespace). The first part (0-0x7FFFFFFF) is reserved for sockets where connections can be accepted. The second part (0x80000000-0xFFFFFFFF) is reserved for allocating ports for the peer (host) socket, once a connection is accepted. This reservation of the port namespace is specific to hv_sock and not known by the generic vsock library (ex: af_vsock). This is problematic because auto-binds/ephemeral ports are handled by the generic vsock library and it has no knowledge of this port reservation and could allocate a port that is not compatible with hv_sock (and legitimately so). The issue hasn't surfaced so far because the auto-bind code of vsock (__vsock_bind_stream) prior to the change 'VSOCK: bind to random port for VMADDR_PORT_ANY' would start walking up from LAST_RESERVED_PORT (1023) and start assigning ports. That will take a large number of iterations to hit 0x7FFFFFFF. But, after the above change to randomize port selection, the issue has started coming up more frequently. There has really been no good reason to have this port reservation logic in hv_sock from the get go. Reserving a local port for peer ports is not how things are handled generally. Peer ports should reflect the peer port. This fixes the issue by lifting the port reservation, and also returns the right peer port. Since the code converts the GUID to the peer port (by using the first 4 bytes), there is a possibility of conflicts, but that seems like a reasonable risk to take, given this is limited to vsock and that only applies to all local sockets. Signed-off-by: Sunil Muthuswamy <sunilmut@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-14xprtrdma: Fix oops in Receive handler after device removalChuck Lever
Since v5.4, a device removal occasionally triggered this oops: Dec 2 17:13:53 manet kernel: BUG: unable to handle page fault for address: 0000000c00000219 Dec 2 17:13:53 manet kernel: #PF: supervisor read access in kernel mode Dec 2 17:13:53 manet kernel: #PF: error_code(0x0000) - not-present page Dec 2 17:13:53 manet kernel: PGD 0 P4D 0 Dec 2 17:13:53 manet kernel: Oops: 0000 [#1] SMP Dec 2 17:13:53 manet kernel: CPU: 2 PID: 468 Comm: kworker/2:1H Tainted: G W 5.4.0-00050-g53717e43af61 #883 Dec 2 17:13:53 manet kernel: Hardware name: Supermicro SYS-6028R-T/X10DRi, BIOS 1.1a 10/16/2015 Dec 2 17:13:53 manet kernel: Workqueue: ib-comp-wq ib_cq_poll_work [ib_core] Dec 2 17:13:53 manet kernel: RIP: 0010:rpcrdma_wc_receive+0x7c/0xf6 [rpcrdma] Dec 2 17:13:53 manet kernel: Code: 6d 8b 43 14 89 c1 89 45 78 48 89 4d 40 8b 43 2c 89 45 14 8b 43 20 89 45 18 48 8b 45 20 8b 53 14 48 8b 30 48 8b 40 10 48 8b 38 <48> 8b 87 18 02 00 00 48 85 c0 75 18 48 8b 05 1e 24 c4 e1 48 85 c0 Dec 2 17:13:53 manet kernel: RSP: 0018:ffffc900035dfe00 EFLAGS: 00010246 Dec 2 17:13:53 manet kernel: RAX: ffff888467290000 RBX: ffff88846c638400 RCX: 0000000000000048 Dec 2 17:13:53 manet kernel: RDX: 0000000000000048 RSI: 00000000f942e000 RDI: 0000000c00000001 Dec 2 17:13:53 manet kernel: RBP: ffff888467611b00 R08: ffff888464e4a3c4 R09: 0000000000000000 Dec 2 17:13:53 manet kernel: R10: ffffc900035dfc88 R11: fefefefefefefeff R12: ffff888865af4428 Dec 2 17:13:53 manet kernel: R13: ffff888466023000 R14: ffff88846c63f000 R15: 0000000000000010 Dec 2 17:13:53 manet kernel: FS: 0000000000000000(0000) GS:ffff88846fa80000(0000) knlGS:0000000000000000 Dec 2 17:13:53 manet kernel: CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 Dec 2 17:13:53 manet kernel: CR2: 0000000c00000219 CR3: 0000000002009002 CR4: 00000000001606e0 Dec 2 17:13:53 manet kernel: Call Trace: Dec 2 17:13:53 manet kernel: __ib_process_cq+0x5c/0x14e [ib_core] Dec 2 17:13:53 manet kernel: ib_cq_poll_work+0x26/0x70 [ib_core] Dec 2 17:13:53 manet kernel: process_one_work+0x19d/0x2cd Dec 2 17:13:53 manet kernel: ? cancel_delayed_work_sync+0xf/0xf Dec 2 17:13:53 manet kernel: worker_thread+0x1a6/0x25a Dec 2 17:13:53 manet kernel: ? cancel_delayed_work_sync+0xf/0xf Dec 2 17:13:53 manet kernel: kthread+0xf4/0xf9 Dec 2 17:13:53 manet kernel: ? kthread_queue_delayed_work+0x74/0x74 Dec 2 17:13:53 manet kernel: ret_from_fork+0x24/0x30 The proximal cause is that this rpcrdma_rep has a rr_rdmabuf that is still pointing to the old ib_device, which has been freed. The only way that is possible is if this rpcrdma_rep was not destroyed by rpcrdma_ia_remove. Debugging showed that was indeed the case: this rpcrdma_rep was still in use by a completing RPC at the time of the device removal, and thus wasn't on the rep free list. So, it was not found by rpcrdma_reps_destroy(). The fix is to introduce a list of all rpcrdma_reps so that they all can be found when a device is removed. That list is used to perform only regbuf DMA unmapping, replacing that call to rpcrdma_reps_destroy(). Meanwhile, to prevent corruption of this list, I've moved the destruction of temp rpcrdma_rep objects to rpcrdma_post_recvs(). rpcrdma_xprt_drain() ensures that post_recvs (and thus rep_destroy) is not invoked while rpcrdma_reps_unmap is walking rb_all_reps, thus protecting the rb_all_reps list. Fixes: b0b227f071a0 ("xprtrdma: Use an llist to manage free rpcrdma_reps") Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2020-01-14xprtrdma: Fix completion wait during device removalChuck Lever
I've found that on occasion, "rmmod <dev>" will hang while if an NFS is under load. Ensure that ri_remove_done is initialized only just before the transport is woken up to force a close. This avoids the completion possibly getting initialized again while the CM event handler is waiting for a wake-up. Fixes: bebd031866ca ("xprtrdma: Support unplugging an HCA from under an NFS mount") Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2020-01-14xprtrdma: Fix create_qp crash on device unloadChuck Lever
On device re-insertion, the RDMA device driver crashes trying to set up a new QP: Nov 27 16:32:06 manet kernel: BUG: kernel NULL pointer dereference, address: 00000000000001c0 Nov 27 16:32:06 manet kernel: #PF: supervisor write access in kernel mode Nov 27 16:32:06 manet kernel: #PF: error_code(0x0002) - not-present page Nov 27 16:32:06 manet kernel: PGD 0 P4D 0 Nov 27 16:32:06 manet kernel: Oops: 0002 [#1] SMP Nov 27 16:32:06 manet kernel: CPU: 1 PID: 345 Comm: kworker/u28:0 Tainted: G W 5.4.0 #852 Nov 27 16:32:06 manet kernel: Hardware name: Supermicro SYS-6028R-T/X10DRi, BIOS 1.1a 10/16/2015 Nov 27 16:32:06 manet kernel: Workqueue: xprtiod xprt_rdma_connect_worker [rpcrdma] Nov 27 16:32:06 manet kernel: RIP: 0010:atomic_try_cmpxchg+0x2/0x12 Nov 27 16:32:06 manet kernel: Code: ff ff 48 8b 04 24 5a c3 c6 07 00 0f 1f 40 00 c3 31 c0 48 81 ff 08 09 68 81 72 0c 31 c0 48 81 ff 83 0c 68 81 0f 92 c0 c3 8b 06 <f0> 0f b1 17 0f 94 c2 84 d2 75 02 89 06 88 d0 c3 53 ba 01 00 00 00 Nov 27 16:32:06 manet kernel: RSP: 0018:ffffc900035abbf0 EFLAGS: 00010046 Nov 27 16:32:06 manet kernel: RAX: 0000000000000000 RBX: 00000000000001c0 RCX: 0000000000000000 Nov 27 16:32:06 manet kernel: RDX: 0000000000000001 RSI: ffffc900035abbfc RDI: 00000000000001c0 Nov 27 16:32:06 manet kernel: RBP: ffffc900035abde0 R08: 000000000000000e R09: ffffffffffffc000 Nov 27 16:32:06 manet kernel: R10: 0000000000000000 R11: 000000000002e800 R12: ffff88886169d9f8 Nov 27 16:32:06 manet kernel: R13: ffff88886169d9f4 R14: 0000000000000246 R15: 0000000000000000 Nov 27 16:32:06 manet kernel: FS: 0000000000000000(0000) GS:ffff88846fa40000(0000) knlGS:0000000000000000 Nov 27 16:32:06 manet kernel: CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 Nov 27 16:32:06 manet kernel: CR2: 00000000000001c0 CR3: 0000000002009006 CR4: 00000000001606e0 Nov 27 16:32:06 manet kernel: Call Trace: Nov 27 16:32:06 manet kernel: do_raw_spin_lock+0x2f/0x5a Nov 27 16:32:06 manet kernel: create_qp_common.isra.47+0x856/0xadf [mlx4_ib] Nov 27 16:32:06 manet kernel: ? slab_post_alloc_hook.isra.60+0xa/0x1a Nov 27 16:32:06 manet kernel: ? __kmalloc+0x125/0x139 Nov 27 16:32:06 manet kernel: mlx4_ib_create_qp+0x57f/0x972 [mlx4_ib] The fix is to copy the qp_init_attr struct that was just created by rpcrdma_ep_create() instead of using the one from the previous connection instance. Fixes: 98ef77d1aaa7 ("xprtrdma: Send Queue size grows after a reconnect") Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2020-01-13netfilter: arp_tables: init netns pointer in xt_tgdtor_param structFlorian Westphal
An earlier commit (1b789577f655060d98d20e, "netfilter: arp_tables: init netns pointer in xt_tgchk_param struct") fixed missing net initialization for arptables, but turns out it was incomplete. We can get a very similar struct net NULL deref during error unwinding: general protection fault: 0000 [#1] PREEMPT SMP KASAN RIP: 0010:xt_rateest_put+0xa1/0x440 net/netfilter/xt_RATEEST.c:77 xt_rateest_tg_destroy+0x72/0xa0 net/netfilter/xt_RATEEST.c:175 cleanup_entry net/ipv4/netfilter/arp_tables.c:509 [inline] translate_table+0x11f4/0x1d80 net/ipv4/netfilter/arp_tables.c:587 do_replace net/ipv4/netfilter/arp_tables.c:981 [inline] do_arpt_set_ctl+0x317/0x650 net/ipv4/netfilter/arp_tables.c:1461 Also init the netns pointer in xt_tgdtor_param struct. Fixes: add67461240c1d ("netfilter: add struct net * to target parameters") Reported-by: syzbot+91bdd8eece0f6629ec8b@syzkaller.appspotmail.com Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2020-01-13netfilter: fix a use-after-free in mtype_destroy()Cong Wang
map->members is freed by ip_set_free() right before using it in mtype_ext_cleanup() again. So we just have to move it down. Reported-by: syzbot+4c3cc6dbe7259dbf9054@syzkaller.appspotmail.com Fixes: 40cd63bf33b2 ("netfilter: ipset: Support extensions which need a per data destroy function") Acked-by: Jozsef Kadlecsik <kadlec@netfilter.org> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2020-01-11devlink: correct misspelling of snapshotJacob Keller
The function to obtain a unique snapshot id was mistakenly typo'd as devlink_region_shapshot_id_get. Fix this typo by renaming the function and all of its users. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-10devlink: Wait longer before warning about unset port typeIdo Schimmel
The commit cited below causes devlink to emit a warning if a type was not set on a devlink port for longer than 30 seconds to "prevent misbehavior of drivers". This proved to be problematic when unregistering the backing netdev. The flow is always: devlink_port_type_clear() // schedules the warning unregister_netdev() // blocking devlink_port_unregister() // cancels the warning The call to unregister_netdev() can block for long periods of time for various reasons: RTNL lock is contended, large amounts of configuration to unroll following dismantle of the netdev, etc. This results in devlink emitting a warning despite the driver behaving correctly. In emulated environments (of future hardware) which are usually very slow, the warning can also be emitted during port creation as more than 30 seconds can pass between the time the devlink port is registered and when its type is set. In addition, syzbot has hit this warning [1] 1974 times since 07/11/19 without being able to produce a reproducer. Probably because reproduction depends on the load or other bugs (e.g., RTNL not being released). To prevent bogus warnings, increase the timeout to 1 hour. [1] https://syzkaller.appspot.com/bug?id=e99b59e9c024a666c9f7450dc162a4b74d09d9cb Fixes: 136bf27fc0e9 ("devlink: add warning in case driver does not set port type") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reported-by: syzbot+b0a18ed7b08b735d2f41@syzkaller.appspotmail.com Reported-by: Alex Veber <alexve@mellanox.com> Tested-by: Alex Veber <alexve@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-10ipv4: Detect rollover in specific fib table dumpDavid Ahern
Sven-Haegar reported looping on fib dumps when 255.255.255.255 route has been added to a table. The looping is caused by the key rolling over from FFFFFFFF to 0. When dumping a specific table only, we need a means to detect when the table dump is done. The key and count saved to cb args are both 0 only at the start of the table dump. If key is 0 and count > 0, then we are in the rollover case. Detect and return to avoid looping. This only affects dumps of a specific table; for dumps of all tables (the case prior to the change in the Fixes tag) inet_dump_fib moved the entry counter to the next table and reset the cb args used by fib_table_dump and fn_trie_dump_leaf, so the rollover ffffffff back to 0 did not cause looping with the dumps. Fixes: effe67926624 ("net: Enable kernel side filtering of route dumps") Reported-by: Sven-Haegar Koch <haegar@sdinet.de> Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-10net/tls: fix async operationJakub Kicinski
Mallesham reports the TLS with async accelerator was broken by commit d10523d0b3d7 ("net/tls: free the record on encryption error") because encryption can return -EINPROGRESS in such setups, which should not be treated as an error. The error is also present in the BPF path (likely copied from there). Reported-by: Mallesham Jatharakonda <mallesham.jatharakonda@oneconvergence.com> Fixes: d3b18ad31f93 ("tls: add bpf support to sk_msg handling") Fixes: d10523d0b3d7 ("net/tls: free the record on encryption error") Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-10net/tls: avoid spurious decryption error with HW resyncJakub Kicinski
When device loses sync mid way through a record - kernel has to re-encrypt the part of the record which the device already decrypted to be able to decrypt and authenticate the record in its entirety. The re-encryption piggy backs on the decryption routine, but obviously because the partially decrypted record can't be authenticated crypto API returns an error which is then ignored by tls_device_reencrypt(). Commit 5c5ec6685806 ("net/tls: add TlsDecryptError stat") added a statistic to count decryption errors, this statistic can't be incremented when we see the expected re-encryption error. Move the inc to the caller. Reported-and-tested-by: David Beckett <david.beckett@netronome.com> Fixes: 5c5ec6685806 ("net/tls: add TlsDecryptError stat") Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-10net: bpf: Don't leak time wait and request socketsLorenz Bauer
It's possible to leak time wait and request sockets via the following BPF pseudo code:   sk = bpf_skc_lookup_tcp(...) if (sk) bpf_sk_release(sk) If sk->sk_state is TCP_NEW_SYN_RECV or TCP_TIME_WAIT the refcount taken by bpf_skc_lookup_tcp is not undone by bpf_sk_release. This is because sk_flags is re-used for other data in both kinds of sockets. The check !sock_flag(sk, SOCK_RCU_FREE) therefore returns a bogus result. Check that sk_flags is valid by calling sk_fullsock. Skip checking SOCK_RCU_FREE if we already know that sk is not a full socket. Fixes: edbf8c01de5a ("bpf: add skc_lookup_tcp helper") Fixes: f7355a6c0497 ("bpf: Check sk_fullsock() before returning from bpf_sk_lookup()") Signed-off-by: Lorenz Bauer <lmb@cloudflare.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Martin KaFai Lau <kafai@fb.com> Link: https://lore.kernel.org/bpf/20200110132336.26099-1-lmb@cloudflare.com
2020-01-09net/x25: fix nonblocking connectMartin Schiller
This patch fixes 2 issues in x25_connect(): 1. It makes absolutely no sense to reset the neighbour and the connection state after a (successful) nonblocking call of x25_connect. This prevents any connection from being established, since the response (call accept) cannot be processed. 2. Any further calls to x25_connect() while a call is pending should simply return, instead of creating new Call Request (on different logical channels). This patch should also fix the "KASAN: null-ptr-deref Write in x25_connect" and "BUG: unable to handle kernel NULL pointer dereference in x25_connect" bugs reported by syzbot. Signed-off-by: Martin Schiller <ms@dev.tdt.de> Reported-by: syzbot+429c200ffc8772bfe070@syzkaller.appspotmail.com Reported-by: syzbot+eec0c87f31a7c3b66f7b@syzkaller.appspotmail.com Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-09bpf/sockmap: Read psock ingress_msg before sk_receive_queueLingpeng Chen
Right now in tcp_bpf_recvmsg, sock read data first from sk_receive_queue if not empty than psock->ingress_msg otherwise. If a FIN packet arrives and there's also some data in psock->ingress_msg, the data in psock->ingress_msg will be purged. It is always happen when request to a HTTP1.0 server like python SimpleHTTPServer since the server send FIN packet after data is sent out. Fixes: 604326b41a6fb ("bpf, sockmap: convert to generic sk_msg interface") Reported-by: Arika Chen <eaglesora@gmail.com> Suggested-by: Arika Chen <eaglesora@gmail.com> Signed-off-by: Lingpeng Chen <forrest0579@gmail.com> Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Song Liu <songliubraving@fb.com> Link: https://lore.kernel.org/bpf/20200109014833.18951-1-forrest0579@gmail.com
2020-01-08tipc: fix wrong connect() return codeTuong Lien
The current 'tipc_wait_for_connect()' function does a wait-loop for the condition 'sk->sk_state != TIPC_CONNECTING' to conclude if the socket connecting has done. However, when the condition is met, it returns '0' even in the case the connecting is actually failed, the socket state is set to 'TIPC_DISCONNECTING' (e.g. when the server socket has closed..). This results in a wrong return code for the 'connect()' call from user, making it believe that the connection is established and go ahead with building, sending a message, etc. but finally failed e.g. '-EPIPE'. This commit fixes the issue by changing the wait condition to the 'tipc_sk_connected(sk)', so the function will return '0' only when the connection is really established. Otherwise, either the socket 'sk_err' if any or '-ETIMEDOUT'/'-EINTR' will be returned correspondingly. Acked-by: Ying Xue <ying.xue@windriver.com> Acked-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: Tuong Lien <tuong.t.lien@dektech.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-08tipc: fix link overflow issue at socket shutdownTuong Lien
When a socket is suddenly shutdown or released, it will reject all the unreceived messages in its receive queue. This applies to a connected socket too, whereas there is only one 'FIN' message required to be sent back to its peer in this case. In case there are many messages in the queue and/or some connections with such messages are shutdown at the same time, the link layer will easily get overflowed at the 'TIPC_SYSTEM_IMPORTANCE' backlog level because of the message rejections. As a result, the link will be taken down. Moreover, immediately when the link is re-established, the socket layer can continue to reject the messages and the same issue happens... The commit refactors the '__tipc_shutdown()' function to only send one 'FIN' in the situation mentioned above. For the connectionless case, it is unavoidable but usually there is no rejections for such socket messages because they are 'dest-droppable' by default. In addition, the new code makes the other socket states clear (e.g.'TIPC_LISTEN') and treats as a separate case to avoid misbehaving. Acked-by: Ying Xue <ying.xue@windriver.com> Acked-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: Tuong Lien <tuong.t.lien@dektech.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>