| Age | Commit message (Collapse) | Author |
|---|
|
RACK skips an ACK unless it advances the most recently delivered
TX timestamp (rack.mstamp). Since RACK also uses the most recent
RTT to decide if a packet is lost, RACK should still run the
loss detection whenever the most recent RTT changes. For example,
an ACK that does not advance the timestamp but triggers the cwnd
undo due to reordering, would then use the most recent (higher)
RTT measurement to detect further losses.
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Reviewed-by: Neal Cardwell <ncardwell@google.com>
Reviewed-by: Priyaranjan Jha <priyarjha@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
RACK should mark a packet lost when remaining wait time is zero.
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Reviewed-by: Neal Cardwell <ncardwell@google.com>
Reviewed-by: Priyaranjan Jha <priyarjha@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When sender detects spurious retransmission, all packets
marked lost are remarked to be in-flight. However some may
be considered lost based on its timestamps in RACK. This patch
forces RACK to re-evaluate, which may be skipped previously if
the ACK does not advance RACK timestamp.
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Reviewed-by: Neal Cardwell <ncardwell@google.com>
Reviewed-by: Priyaranjan Jha <priyarjha@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
RACK does not test the loss recovery state correctly to compute
the reordering window. It assumes if lost_out is zero then TCP is
not in loss recovery. But it can be zero during recovery before
calling tcp_rack_detect_loss(): when an ACK acknowledges all
packets marked lost before receiving this ACK, but has not yet
to discover new ones by tcp_rack_detect_loss(). The fix is to
simply test the congestion state directly.
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Reviewed-by: Neal Cardwell <ncardwell@google.com>
Reviewed-by: Priyaranjan Jha <priyarjha@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Fix BBR so that upon notification of a loss recovery undo BBR resets
long-term bandwidth sampling.
Under high reordering, reordering events can be interpreted as loss.
If the reordering and spurious loss estimates are high enough, this
can cause BBR to spuriously estimate that we are seeing loss rates
high enough to trigger long-term bandwidth estimation. To avoid that
problem, this commit resets long-term bandwidth sampling on loss
recovery undo events.
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Reviewed-by: Yuchung Cheng <ycheng@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Fix BBR so that upon notification of a loss recovery undo BBR resets
the full pipe detection (STARTUP exit) state machine.
Under high reordering, reordering events can be interpreted as loss.
If the reordering and spurious loss estimates are high enough, this
could previously cause BBR to spuriously estimate that the pipe is
full.
Since spurious loss recovery means that our overall sending will have
slowed down spuriously, this commit gives a flow more time to probe
robustly for bandwidth and decide the pipe is really full.
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Reviewed-by: Yuchung Cheng <ycheng@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This commit records the "full bw reached" decision in a new
full_bw_reached bit. This is a pure refactor that does not change the
current behavior, but enables subsequent fixes and improvements.
In particular, this enables simple and clean fixes because the full_bw
and full_bw_cnt can be unconditionally zeroed without worrying about
forgetting that we estimated we filled the pipe in Startup. And it
enables future improvements because multiple code paths can be used
for estimating that we filled the pipe in Startup; any new code paths
only need to set this bit when they think the pipe is full.
Note that this fix intentionally reduces the width of the full_bw_cnt
counter, since we have never used the most significant bit.
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Reviewed-by: Yuchung Cheng <ycheng@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Mark tcp_sock during a SACK reneging event and invalidate rate samples
while marked. Such rate samples may overestimate bw by including packets
that were SACKed before reneging.
< ack 6001 win 10000 sack 7001:38001
< ack 7001 win 0 sack 8001:38001 // Reneg detected
> seq 7001:8001 // RTO, SACK cleared.
< ack 38001 win 10000
In above example the rate sample taken after the last ack will count
7001-38001 as delivered while the actual delivery rate likely could
be much lower i.e. 7001-8001.
This patch adds a new field tcp_sock.sack_reneg and marks it when we
declare SACK reneging and entering TCP_CA_Loss, and unmarks it after
the last rate sample was taken before moving back to TCP_CA_Open. This
patch also invalidates rate samples taken while tcp_sock.is_sack_reneg
is set.
Fixes: b9f64820fb22 ("tcp: track data delivery rate for a TCP connection")
Signed-off-by: Yousuk Seung <ysseung@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Acked-by: Priyaranjan Jha <priyarjha@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When I switched rcv_rtt_est to high resolution timestamps, I forgot
that tp->tcp_mstamp needed to be refreshed in tcp_rcv_space_adjust()
Using an old timestamp leads to autotuning lags.
Fixes: 645f4c6f2ebd ("tcp: switch rcv_rtt_est and rcvq_space to high resolution timestamps")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Wei Wang <weiwan@google.com>
Cc: Neal Cardwell <ncardwell@google.com>
Cc: Yuchung Cheng <ycheng@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
commit 8d79266bc48c ("ip6_tunnel: add collect_md mode to IPv6 tunnels")
introduced new exit point in ipxip6_rcv. however rcu_read_unlock is
missing there. this diff is fixing this
v1->v2:
instead of doing rcu_read_unlock in place, we are going to "drop"
section (to prevent skb leakage)
Fixes: 8d79266bc48c ("ip6_tunnel: add collect_md mode to IPv6 tunnels")
Signed-off-by: Nikita V. Shirokov <tehnerd@fb.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This is a fix for syzkaller719569, where memory registration was
attempted without any underlying transport being loaded.
Analysis of the case reveals that it is the setsockopt() RDS_GET_MR
(2) and RDS_GET_MR_FOR_DEST (7) that are vulnerable.
Here is an example stack trace when the bug is hit:
BUG: unable to handle kernel NULL pointer dereference at 00000000000000c0
IP: __rds_rdma_map+0x36/0x440 [rds]
PGD 2f93d03067 P4D 2f93d03067 PUD 2f93d02067 PMD 0
Oops: 0000 [#1] SMP
Modules linked in: bridge stp llc tun rpcsec_gss_krb5 nfsv4
dns_resolver nfs fscache rds binfmt_misc sb_edac intel_powerclamp
coretemp kvm_intel kvm irqbypass crct10dif_pclmul c rc32_pclmul
ghash_clmulni_intel pcbc aesni_intel crypto_simd glue_helper cryptd
iTCO_wdt mei_me sg iTCO_vendor_support ipmi_si mei ipmi_devintf nfsd
shpchp pcspkr i2c_i801 ioatd ma ipmi_msghandler wmi lpc_ich mfd_core
auth_rpcgss nfs_acl lockd grace sunrpc ip_tables ext4 mbcache jbd2
mgag200 i2c_algo_bit drm_kms_helper ixgbe syscopyarea ahci sysfillrect
sysimgblt libahci mdio fb_sys_fops ttm ptp libata sd_mod mlx4_core drm
crc32c_intel pps_core megaraid_sas i2c_core dca dm_mirror
dm_region_hash dm_log dm_mod
CPU: 48 PID: 45787 Comm: repro_set2 Not tainted 4.14.2-3.el7uek.x86_64 #2
Hardware name: Oracle Corporation ORACLE SERVER X5-2L/ASM,MOBO TRAY,2U, BIOS 31110000 03/03/2017
task: ffff882f9190db00 task.stack: ffffc9002b994000
RIP: 0010:__rds_rdma_map+0x36/0x440 [rds]
RSP: 0018:ffffc9002b997df0 EFLAGS: 00010202
RAX: 0000000000000000 RBX: ffff882fa2182580 RCX: 0000000000000000
RDX: 0000000000000000 RSI: ffffc9002b997e40 RDI: ffff882fa2182580
RBP: ffffc9002b997e30 R08: 0000000000000000 R09: 0000000000000002
R10: ffff885fb29e3838 R11: 0000000000000000 R12: ffff882fa2182580
R13: ffff882fa2182580 R14: 0000000000000002 R15: 0000000020000ffc
FS: 00007fbffa20b700(0000) GS:ffff882fbfb80000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00000000000000c0 CR3: 0000002f98a66006 CR4: 00000000001606e0
Call Trace:
rds_get_mr+0x56/0x80 [rds]
rds_setsockopt+0x172/0x340 [rds]
? __fget_light+0x25/0x60
? __fdget+0x13/0x20
SyS_setsockopt+0x80/0xe0
do_syscall_64+0x67/0x1b0
entry_SYSCALL64_slow_path+0x25/0x25
RIP: 0033:0x7fbff9b117f9
RSP: 002b:00007fbffa20aed8 EFLAGS: 00000293 ORIG_RAX: 0000000000000036
RAX: ffffffffffffffda RBX: 00000000000c84a4 RCX: 00007fbff9b117f9
RDX: 0000000000000002 RSI: 0000400000000114 RDI: 000000000000109b
RBP: 00007fbffa20af10 R08: 0000000000000020 R09: 00007fbff9dd7860
R10: 0000000020000ffc R11: 0000000000000293 R12: 0000000000000000
R13: 00007fbffa20b9c0 R14: 00007fbffa20b700 R15: 0000000000000021
Code: 41 56 41 55 49 89 fd 41 54 53 48 83 ec 18 8b 87 f0 02 00 00 48
89 55 d0 48 89 4d c8 85 c0 0f 84 2d 03 00 00 48 8b 87 00 03 00 00 <48>
83 b8 c0 00 00 00 00 0f 84 25 03 00 0 0 48 8b 06 48 8b 56 08
The fix is to check the existence of an underlying transport in
__rds_rdma_map().
Signed-off-by: Håkon Bugge <haakon.bugge@oracle.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Macvlan devices are similar to vlans and do not update their
own trans_start. In order for arp monitoring to work for a bond device
when the slaves are macvlans, obtain its real device.
Signed-off-by: Chris Dion <christopher.dion@dell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This changes calling conventions (and simplifies the hell out
the callers). New rules: once struct socket had been passed
to sock_alloc_file(), it's been consumed either by struct file
or by sock_release() done by sock_alloc_file(). Either way
the caller should not do sock_release() after that point.
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
simplifies failure exits considerably...
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
1) it's fput() or sock_release(), not both
2) don't do fd_install() until the last failure exit.
3) not a bug per se, but... don't attach socket to struct file
until it's set up.
Take reserving descriptor into the caller, move fd_install() to the
caller, sanitize failure exits and calling conventions.
Cc: stable@vger.kernel.org # v4.6+
Acked-by: Tom Herbert <tom@herbertland.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Whenever the sock object is in DCCP_CLOSED state,
dccp_disconnect() must free dccps_hc_tx_ccid and
dccps_hc_rx_ccid and set to NULL.
Signed-off-by: Mohamed Ghannam <simo.ghannam@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Since commit 3b4477d2dcf2709d0be89e2a8dced3d0f4a017f2 ("VSOCK: use TCP
state constants for sk_state") VSOCK has used TCP_* constants for
sk_state.
Commit b4562ca7925a3bedada87a3dd072dd5bad043288 ("hv_sock: add locking
in the open/close/release code paths") reintroduced the SS_DISCONNECTING
constant.
This patch replaces the old SS_DISCONNECTING with the new TCP_CLOSING
constant.
CC: Dexuan Cui <decui@microsoft.com>
CC: Cathy Avery <cavery@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Jorgen Hansen <jhansen@vmware.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When the function tipc_accept_from_sock() fails to create an instance of
struct tipc_subscriber it omits to free the already created instance of
struct tipc_conn instance before it returns.
We fix that with this commit.
Reported-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In tipc_topsrv_kern_subscr() when s->tipc_conn_new() fails
we call tipc_close_conn() to clean up, but in this case
calling conn_put() is just enough.
This fixes the folllowing crash:
kasan: GPF could be caused by NULL-ptr deref or user memory access
general protection fault: 0000 [#1] SMP KASAN
Dumping ftrace buffer:
(ftrace buffer empty)
Modules linked in:
CPU: 0 PID: 3085 Comm: syzkaller064164 Not tainted 4.15.0-rc1+ #137
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
task: 00000000c24413a5 task.stack: 000000005e8160b5
RIP: 0010:__lock_acquire+0xd55/0x47f0 kernel/locking/lockdep.c:3378
RSP: 0018:ffff8801cb5474a8 EFLAGS: 00010002
RAX: dffffc0000000000 RBX: 0000000000000000 RCX: 0000000000000000
RDX: 0000000000000004 RSI: 0000000000000000 RDI: ffffffff85ecb400
RBP: ffff8801cb547830 R08: 0000000000000001 R09: 0000000000000000
R10: 0000000000000000 R11: ffffffff87489d60 R12: ffff8801cd2980c0
R13: 0000000000000000 R14: 0000000000000001 R15: 0000000000000020
FS: 00000000014ee880(0000) GS:ffff8801db400000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007ffee2426e40 CR3: 00000001cb85a000 CR4: 00000000001406f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
lock_acquire+0x1d5/0x580 kernel/locking/lockdep.c:4004
__raw_spin_lock_bh include/linux/spinlock_api_smp.h:135 [inline]
_raw_spin_lock_bh+0x31/0x40 kernel/locking/spinlock.c:175
spin_lock_bh include/linux/spinlock.h:320 [inline]
tipc_subscrb_subscrp_delete+0x8f/0x470 net/tipc/subscr.c:201
tipc_subscrb_delete net/tipc/subscr.c:238 [inline]
tipc_subscrb_release_cb+0x17/0x30 net/tipc/subscr.c:316
tipc_close_conn+0x171/0x270 net/tipc/server.c:204
tipc_topsrv_kern_subscr+0x724/0x810 net/tipc/server.c:514
tipc_group_create+0x702/0x9c0 net/tipc/group.c:184
tipc_sk_join net/tipc/socket.c:2747 [inline]
tipc_setsockopt+0x249/0xc10 net/tipc/socket.c:2861
SYSC_setsockopt net/socket.c:1851 [inline]
SyS_setsockopt+0x189/0x360 net/socket.c:1830
entry_SYSCALL_64_fastpath+0x1f/0x96
Fixes: 14c04493cb77 ("tipc: add ability to order and receive topology events in driver")
Reported-by: syzbot <syzkaller@googlegroups.com>
Cc: Jon Maloy <jon.maloy@ericsson.com>
Cc: Ying Xue <ying.xue@windriver.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Check the qmin & qmax values doesn't overflow for the given Wlog value.
Check that qmin <= qmax.
Fixes: a783474591f2 ("[PKT_SCHED]: Generic RED layer")
Signed-off-by: Nogah Frankel <nogahf@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This reverts commit d6f295e9def0; some userspace (in the case
we noticed it's wpa_supplicant), is relying on the current
error code to determine that a fixed name interface already
exists.
Reported-by: Jouni Malinen <j@w1.fi>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
We had to disable BH _before_ calling __inet_twsk_hashdance() in commit
cfac7f836a71 ("tcp/dccp: block bh before arming time_wait timer").
This means we can revert 614bdd4d6e61 ("tcp: must block bh in
__inet_twsk_hashdance()").
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Pull networking fixes from David Miller:
1) Various TCP control block fixes, including one that crashes with
SELinux, from David Ahern and Eric Dumazet.
2) Fix ACK generation in rxrpc, from David Howells.
3) ipvlan doesn't set the mark properly in the ipv4 route lookup key,
from Gao Feng.
4) SIT configuration doesn't take on the frag_off ipv4 field
configuration properly, fix from Hangbin Liu.
5) TSO can fail after device down/up on stmmac, fix from Lars Persson.
6) Various bpftool fixes (mostly in JSON handling) from Quentin Monnet.
7) Various SKB leak fixes in vhost/tun/tap (mostly observed as
performance problems). From Wei Xu.
8) mvpps's TX descriptors were not zero initialized, from Yan Markman.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (57 commits)
tcp: use IPCB instead of TCP_SKB_CB in inet_exact_dif_match()
tcp: add tcp_v4_fill_cb()/tcp_v4_restore_cb()
rxrpc: Fix the MAINTAINERS record
rxrpc: Use correct netns source in rxrpc_release_sock()
liquidio: fix incorrect indentation of assignment statement
stmmac: reset last TSO segment size after device open
ipvlan: Add the skb->mark as flow4's member to lookup route
s390/qeth: build max size GSO skbs on L2 devices
s390/qeth: fix GSO throughput regression
s390/qeth: fix thinko in IPv4 multicast address tracking
tap: free skb if flags error
tun: free skb in early errors
vhost: fix skb leak in handle_rx()
bnxt_en: Fix a variable scoping in bnxt_hwrm_do_send_msg()
bnxt_en: fix dst/src fid for vxlan encap/decap actions
bnxt_en: wildcard smac while creating tunnel decap filter
bnxt_en: Need to unconditionally shut down RoCE in bnxt_shutdown
phylink: ensure we take the link down when phylink_stop() is called
sfp: warn about modules requiring address change sequence
sfp: improve RX_LOS handling
...
|
|
James Morris reported kernel stack corruption bug [1] while
running the SELinux testsuite, and bisected to a recent
commit bffa72cf7f9d ("net: sk_buff rbnode reorg")
We believe this commit is fine, but exposes an older bug.
SELinux code runs from tcp_filter() and might send an ICMP,
expecting IP options to be found in skb->cb[] using regular IPCB placement.
We need to defer TCP mangling of skb->cb[] after tcp_filter() calls.
This patch adds tcp_v4_fill_cb()/tcp_v4_restore_cb() in a very
similar way we added them for IPv6.
[1]
[ 339.806024] SELinux: failure in selinux_parse_skb(), unable to parse packet
[ 339.822505] Kernel panic - not syncing: stack-protector: Kernel stack is corrupted in: ffffffff81745af5
[ 339.822505]
[ 339.852250] CPU: 4 PID: 3642 Comm: client Not tainted 4.15.0-rc1-test #15
[ 339.868498] Hardware name: LENOVO 10FGS0VA1L/30BC, BIOS FWKT68A 01/19/2017
[ 339.885060] Call Trace:
[ 339.896875] <IRQ>
[ 339.908103] dump_stack+0x63/0x87
[ 339.920645] panic+0xe8/0x248
[ 339.932668] ? ip_push_pending_frames+0x33/0x40
[ 339.946328] ? icmp_send+0x525/0x530
[ 339.958861] ? kfree_skbmem+0x60/0x70
[ 339.971431] __stack_chk_fail+0x1b/0x20
[ 339.984049] icmp_send+0x525/0x530
[ 339.996205] ? netlbl_skbuff_err+0x36/0x40
[ 340.008997] ? selinux_netlbl_err+0x11/0x20
[ 340.021816] ? selinux_socket_sock_rcv_skb+0x211/0x230
[ 340.035529] ? security_sock_rcv_skb+0x3b/0x50
[ 340.048471] ? sk_filter_trim_cap+0x44/0x1c0
[ 340.061246] ? tcp_v4_inbound_md5_hash+0x69/0x1b0
[ 340.074562] ? tcp_filter+0x2c/0x40
[ 340.086400] ? tcp_v4_rcv+0x820/0xa20
[ 340.098329] ? ip_local_deliver_finish+0x71/0x1a0
[ 340.111279] ? ip_local_deliver+0x6f/0xe0
[ 340.123535] ? ip_rcv_finish+0x3a0/0x3a0
[ 340.135523] ? ip_rcv_finish+0xdb/0x3a0
[ 340.147442] ? ip_rcv+0x27c/0x3c0
[ 340.158668] ? inet_del_offload+0x40/0x40
[ 340.170580] ? __netif_receive_skb_core+0x4ac/0x900
[ 340.183285] ? rcu_accelerate_cbs+0x5b/0x80
[ 340.195282] ? __netif_receive_skb+0x18/0x60
[ 340.207288] ? process_backlog+0x95/0x140
[ 340.218948] ? net_rx_action+0x26c/0x3b0
[ 340.230416] ? __do_softirq+0xc9/0x26a
[ 340.241625] ? do_softirq_own_stack+0x2a/0x40
[ 340.253368] </IRQ>
[ 340.262673] ? do_softirq+0x50/0x60
[ 340.273450] ? __local_bh_enable_ip+0x57/0x60
[ 340.285045] ? ip_finish_output2+0x175/0x350
[ 340.296403] ? ip_finish_output+0x127/0x1d0
[ 340.307665] ? nf_hook_slow+0x3c/0xb0
[ 340.318230] ? ip_output+0x72/0xe0
[ 340.328524] ? ip_fragment.constprop.54+0x80/0x80
[ 340.340070] ? ip_local_out+0x35/0x40
[ 340.350497] ? ip_queue_xmit+0x15c/0x3f0
[ 340.361060] ? __kmalloc_reserve.isra.40+0x31/0x90
[ 340.372484] ? __skb_clone+0x2e/0x130
[ 340.382633] ? tcp_transmit_skb+0x558/0xa10
[ 340.393262] ? tcp_connect+0x938/0xad0
[ 340.403370] ? ktime_get_with_offset+0x4c/0xb0
[ 340.414206] ? tcp_v4_connect+0x457/0x4e0
[ 340.424471] ? __inet_stream_connect+0xb3/0x300
[ 340.435195] ? inet_stream_connect+0x3b/0x60
[ 340.445607] ? SYSC_connect+0xd9/0x110
[ 340.455455] ? __audit_syscall_entry+0xaf/0x100
[ 340.466112] ? syscall_trace_enter+0x1d0/0x2b0
[ 340.476636] ? __audit_syscall_exit+0x209/0x290
[ 340.487151] ? SyS_connect+0xe/0x10
[ 340.496453] ? do_syscall_64+0x67/0x1b0
[ 340.506078] ? entry_SYSCALL64_slow_path+0x25/0x25
Fixes: 971f10eca186 ("tcp: better TCP_SKB_CB layout to reduce cache line misses")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: James Morris <james.l.morris@oracle.com>
Tested-by: James Morris <james.l.morris@oracle.com>
Tested-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In rxrpc_release_sock() there may be no rx->local value to access, so we
can't unconditionally follow it to the rxrpc network namespace information
to poke the connection reapers.
Instead, use the socket's namespace pointer to find the namespace.
This unfixed code causes the following static checker warning:
net/rxrpc/af_rxrpc.c:898 rxrpc_release_sock()
error: we previously assumed 'rx->local' could be null (see line 887)
Fixes: 3d18cbb7fd0c ("rxrpc: Fix conn expiry timers")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Pull NFS client fixes from Anna Schumaker:
"These patches fix a problem with compiling using an old version of
gcc, and also fix up error handling in the SUNRPC layer.
- NFSv4: Ensure gcc 4.4.4 can compile initialiser for
"invalid_stateid"
- SUNRPC: Allow connect to return EHOSTUNREACH
- SUNRPC: Handle ENETDOWN errors"
* tag 'nfs-for-4.15-2' of git://git.linux-nfs.org/projects/anna/linux-nfs:
SUNRPC: Handle ENETDOWN errors
SUNRPC: Allow connect to return EHOSTUNREACH
NFSv4: Ensure gcc 4.4.4 can compile initialiser for "invalid_stateid"
|
|
Remove the second tipc_rcv() call in tipc_udp_recv(). We have just
checked that the bearer is not up, and calling tipc_rcv() with a bearer
that is not up leads to a TIPC div-by-zero crash in
tipc_node_calculate_timer(). The crash is rare in practice, but can
happen like this:
We're enabling a bearer, but it's not yet up and fully initialized.
At the same time we receive a discovery packet, and in tipc_udp_recv()
we end up calling tipc_rcv() with the not-yet-initialized bearer,
causing later the div-by-zero crash in tipc_node_calculate_timer().
Jon Maloy explains the impact of removing the second tipc_rcv() call:
"link setup in the worst case will be delayed until the next arriving
discovery messages, 1 sec later, and this is an acceptable delay."
As the tipc_rcv() call is removed, just leave the function via the
rcu_out label, so that we will kfree_skb().
[ 12.590450] Own node address <1.1.1>, network identity 1
[ 12.668088] divide error: 0000 [#1] SMP
[ 12.676952] CPU: 2 PID: 0 Comm: swapper/2 Not tainted 4.14.2-dirty #1
[ 12.679225] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-2.fc27 04/01/2014
[ 12.682095] task: ffff8c2a761edb80 task.stack: ffffa41cc0cac000
[ 12.684087] RIP: 0010:tipc_node_calculate_timer.isra.12+0x45/0x60 [tipc]
[ 12.686486] RSP: 0018:ffff8c2a7fc838a0 EFLAGS: 00010246
[ 12.688451] RAX: 0000000000000000 RBX: ffff8c2a5b382600 RCX: 0000000000000000
[ 12.691197] RDX: 0000000000000000 RSI: ffff8c2a5b382600 RDI: ffff8c2a5b382600
[ 12.693945] RBP: ffff8c2a7fc838b0 R08: 0000000000000001 R09: 0000000000000001
[ 12.696632] R10: 0000000000000000 R11: 0000000000000000 R12: ffff8c2a5d8949d8
[ 12.699491] R13: ffffffff95ede400 R14: 0000000000000000 R15: ffff8c2a5d894800
[ 12.702338] FS: 0000000000000000(0000) GS:ffff8c2a7fc80000(0000) knlGS:0000000000000000
[ 12.705099] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 12.706776] CR2: 0000000001bb9440 CR3: 00000000bd009001 CR4: 00000000003606e0
[ 12.708847] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 12.711016] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 12.712627] Call Trace:
[ 12.713390] <IRQ>
[ 12.714011] tipc_node_check_dest+0x2e8/0x350 [tipc]
[ 12.715286] tipc_disc_rcv+0x14d/0x1d0 [tipc]
[ 12.716370] tipc_rcv+0x8b0/0xd40 [tipc]
[ 12.717396] ? minmax_running_min+0x2f/0x60
[ 12.718248] ? dst_alloc+0x4c/0xa0
[ 12.718964] ? tcp_ack+0xaf1/0x10b0
[ 12.719658] ? tipc_udp_is_known_peer+0xa0/0xa0 [tipc]
[ 12.720634] tipc_udp_recv+0x71/0x1d0 [tipc]
[ 12.721459] ? dst_alloc+0x4c/0xa0
[ 12.722130] udp_queue_rcv_skb+0x264/0x490
[ 12.722924] __udp4_lib_rcv+0x21e/0x990
[ 12.723670] ? ip_route_input_rcu+0x2dd/0xbf0
[ 12.724442] ? tcp_v4_rcv+0x958/0xa40
[ 12.725039] udp_rcv+0x1a/0x20
[ 12.725587] ip_local_deliver_finish+0x97/0x1d0
[ 12.726323] ip_local_deliver+0xaf/0xc0
[ 12.726959] ? ip_route_input_noref+0x19/0x20
[ 12.727689] ip_rcv_finish+0xdd/0x3b0
[ 12.728307] ip_rcv+0x2ac/0x360
[ 12.728839] __netif_receive_skb_core+0x6fb/0xa90
[ 12.729580] ? udp4_gro_receive+0x1a7/0x2c0
[ 12.730274] __netif_receive_skb+0x1d/0x60
[ 12.730953] ? __netif_receive_skb+0x1d/0x60
[ 12.731637] netif_receive_skb_internal+0x37/0xd0
[ 12.732371] napi_gro_receive+0xc7/0xf0
[ 12.732920] receive_buf+0x3c3/0xd40
[ 12.733441] virtnet_poll+0xb1/0x250
[ 12.733944] net_rx_action+0x23e/0x370
[ 12.734476] __do_softirq+0xc5/0x2f8
[ 12.734922] irq_exit+0xfa/0x100
[ 12.735315] do_IRQ+0x4f/0xd0
[ 12.735680] common_interrupt+0xa2/0xa2
[ 12.736126] </IRQ>
[ 12.736416] RIP: 0010:native_safe_halt+0x6/0x10
[ 12.736925] RSP: 0018:ffffa41cc0cafe90 EFLAGS: 00000246 ORIG_RAX: ffffffffffffff4d
[ 12.737756] RAX: 0000000000000000 RBX: ffff8c2a761edb80 RCX: 0000000000000000
[ 12.738504] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000
[ 12.739258] RBP: ffffa41cc0cafe90 R08: 0000014b5b9795e5 R09: ffffa41cc12c7e88
[ 12.740118] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000002
[ 12.740964] R13: ffff8c2a761edb80 R14: 0000000000000000 R15: 0000000000000000
[ 12.741831] default_idle+0x2a/0x100
[ 12.742323] arch_cpu_idle+0xf/0x20
[ 12.742796] default_idle_call+0x28/0x40
[ 12.743312] do_idle+0x179/0x1f0
[ 12.743761] cpu_startup_entry+0x1d/0x20
[ 12.744291] start_secondary+0x112/0x120
[ 12.744816] secondary_startup_64+0xa5/0xa5
[ 12.745367] Code: b9 f4 01 00 00 48 89 c2 48 c1 ea 02 48 3d d3 07 00
00 48 0f 47 d1 49 8b 0c 24 48 39 d1 76 07 49 89 14 24 48 89 d1 31 d2 48
89 df <48> f7 f1 89 c6 e8 81 6e ff ff 5b 41 5c 5d c3 66 90 66 2e 0f 1f
[ 12.747527] RIP: tipc_node_calculate_timer.isra.12+0x45/0x60 [tipc] RSP: ffff8c2a7fc838a0
[ 12.748555] ---[ end trace 1399ab83390650fd ]---
[ 12.749296] Kernel panic - not syncing: Fatal exception in interrupt
[ 12.750123] Kernel Offset: 0x13200000 from 0xffffffff82000000
(relocation range: 0xffffffff80000000-0xffffffffbfffffff)
[ 12.751215] Rebooting in 60 seconds..
Fixes: c9b64d492b1f ("tipc: add replicast peer discovery")
Signed-off-by: Tommi Rantala <tommi.t.rantala@nokia.com>
Cc: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Maciej Żenczykowski reported some panics in tcp_twsk_destructor()
that might be caused by the following bug.
timewait timer is pinned to the cpu, because we want to transition
timwewait refcount from 0 to 4 in one go, once everything has been
initialized.
At the time commit ed2e92394589 ("tcp/dccp: fix timewait races in timer
handling") was merged, TCP was always running from BH habdler.
After commit 5413d1babe8f ("net: do not block BH while processing
socket backlog") we definitely can run tcp_time_wait() from process
context.
We need to block BH in the critical section so that the pinned timer
has still its purpose.
This bug is more likely to happen under stress and when very small RTO
are used in datacenter flows.
Fixes: 5413d1babe8f ("net: do not block BH while processing socket backlog")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Maciej Żenczykowski <maze@google.com>
Acked-by: Maciej Żenczykowski <maze@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
outstanding frags
Now for the abandoned chunks in unsent outq, it would just free the chunks.
Because no tsn is assigned to them yet, there's no need to send fwd tsn to
peer, unlike for the abandoned chunks in sent outq.
The problem is when parts of the msg have been sent and the other frags
are still in unsent outq, if they are abandoned/dropped, the peer would
never get this msg reassembled.
So these frags in unsent outq can't be dropped if this msg already has
outstanding frags.
This patch does the check in sctp_chunk_abandoned and
sctp_prsctp_prune_unsent.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
As rfc3758#section-3.1 demands:
A3) When a TSN is "abandoned", if it is part of a fragmented message,
all other TSN's within that fragmented message MUST be abandoned
at the same time.
Besides, if it couldn't handle this, the rest frags would never get
assembled in peer side.
This patch supports it by adding abandoned flag in sctp_datamsg, when
one chunk is being abandoned, set chunk->msg->abandoned as well. Next
time when checking for abandoned, go checking chunk->msg->abandoned
first.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
prsctp_prune
Now outstanding_bytes is only increased when appending chunks into one
packet and sending it at 1st time, while decreased when it is about to
move into retransmit queue. It means outstanding_bytes value is already
decreased for all chunks in retransmit queue.
However sctp_prsctp_prune_sent is a common function to check the chunks
in both transmitted and retransmit queue, it decrease outstanding_bytes
when moving a chunk into abandoned queue from either of them.
It could cause outstanding_bytes underflow, as it also decreases it's
value for the chunks in retransmit queue.
This patch fixes it by only updating outstanding_bytes for transmitted
queue when pruning queues for prsctp prio policy, the same fix is also
needed in sctp_check_transmitted.
Fixes: 8dbdf1f5b09c ("sctp: implement prsctp PRIO policy")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
After parsing the sit netlink change info, we forget to update frag_off in
ipip6_tunnel_update(). Fix it by assigning frag_off with new value.
Reported-by: Jianlin Shi <jishi@redhat.com>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
tcp_v6_send_reset() expects to receive an skb with skb->cb[] layout as
used in TCP stack.
MD5 lookup uses tcp_v6_iif() and tcp_v6_sdif() and thus
TCP_SKB_CB(skb)->header.h6
This patch probably fixes RST packets sent on behalf of a timewait md5
ipv6 socket.
Before Florian patch, tcp_v6_restore_cb() was needed before jumping to
no_tcp_socket label.
Fixes: 271c3b9b7bda ("tcp: honour SO_BINDTODEVICE for TW_RST case too")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Florian Westphal <fw@strlen.de>
Acked-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Similar to commit d7fb60b9cafb ("net_sched: get rid of tcfa_rcu"),
TC actions don't need to respect RCU grace period, because it
is either just detached from tc filter (standalone case) or
it is removed together with tc filter (bound case) in which case
RCU grace period is already respected at filter layer.
Fixes: 5c5670fae430 ("net/sched: Introduce sample tc action")
Reported-by: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: Jiri Pirko <jiri@resnulli.us>
Cc: Yotam Gigi <yotamg@mellanox.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs
David Howells says:
====================
rxrpc: Fixes
Here are three patches for AF_RXRPC. One removes some whitespace, one
fixes terminal ACK generation and the third makes a couple of places
actually use the timeout value just determined rather than ignoring it.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Pull nfsd fixes from Bruce Fields:
"I screwed up my merge window pull request; I only sent half of what I
meant to.
There were no new features, just bugfixes of various importance and
some very minor cleanup, so I think it's all still appropriate for
-rc2.
Highlights:
- Fixes from Trond for some races in the NFSv4 state code.
- Fix from Naofumi Honda for a typo in the blocked lock notificiation
code
- Fixes from Vasily Averin for some problems starting and stopping
lockd especially in network namespaces"
* tag 'nfsd-4.15-1' of git://linux-nfs.org/~bfields/linux: (23 commits)
lockd: fix "list_add double add" caused by legacy signal interface
nlm_shutdown_hosts_net() cleanup
race of nfsd inetaddr notifiers vs nn->nfsd_serv change
race of lockd inetaddr notifiers vs nlmsvc_rqst change
SUNRPC: make cache_detail structures const
NFSD: make cache_detail structures const
sunrpc: make the function arg as const
nfsd: check for use of the closed special stateid
nfsd: fix panic in posix_unblock_lock called from nfs4_laundromat
lockd: lost rollback of set_grace_period() in lockd_down_net()
lockd: added cleanup checks in exit_net hook
grace: replace BUG_ON by WARN_ONCE in exit_net hook
nfsd: fix locking validator warning on nfs4_ol_stateid->st_mutex class
lockd: remove net pointer from messages
nfsd: remove net pointer from debug messages
nfsd: Fix races with check_stateid_generation()
nfsd: Ensure we check stateid validity in the seqid operation checks
nfsd: Fix race in lock stateid creation
nfsd4: move find_lock_stateid
nfsd: Ensure we don't recognise lock stateids after freeing them
...
|
|
Pull networking fixes from David Miller:
1) The forcedeth conversion from pci_*() DMA interfaces to dma_*() ones
missed one spot. From Zhu Yanjun.
2) Missing CRYPTO_SHA256 Kconfig dep in cfg80211, from Johannes Berg.
3) Fix checksum offloading in thunderx driver, from Sunil Goutham.
4) Add SPDX to vm_sockets_diag.h, from Stephen Hemminger.
5) Fix use after free of packet headers in TIPC, from Jon Maloy.
6) "sizeof(ptr)" vs "sizeof(*ptr)" bug in i40e, from Gustavo A R Silva.
7) Tunneling fixes in mlxsw driver, from Petr Machata.
8) Fix crash in fanout_demux_rollover() of AF_PACKET, from Mike
Maloney.
9) Fix race in AF_PACKET bind() vs. NETDEV_UP notifier, from Eric
Dumazet.
10) Fix regression in sch_sfq.c due to one of the timer_setup()
conversions. From Paolo Abeni.
11) SCTP does list_for_each_entry() using wrong struct member, fix from
Xin Long.
12) Don't use big endian netlink attribute read for
IFLA_BOND_AD_ACTOR_SYSTEM, it is in cpu endianness. Also from Xin
Long.
13) Fix mis-initialization of q->link.clock in CBQ scheduler, preventing
adding filters there. From Jiri Pirko.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (67 commits)
ethernet: dwmac-stm32: Fix copyright
net: via: via-rhine: use %p to format void * address instead of %x
net: ethernet: xilinx: Mark XILINX_LL_TEMAC broken on 64-bit
myri10ge: Update MAINTAINERS
net: sched: cbq: create block for q->link.block
atm: suni: remove extraneous space to fix indentation
atm: lanai: use %p to format kernel addresses instead of %x
VSOCK: Don't set sk_state to TCP_CLOSE before testing it
atm: fore200e: use %pK to format kernel addresses instead of %x
ambassador: fix incorrect indentation of assignment statement
vxlan: use __be32 type for the param vni in __vxlan_fdb_delete
bonding: use nla_get_u64 to extract the value for IFLA_BOND_AD_ACTOR_SYSTEM
sctp: use right member as the param of list_for_each_entry
sch_sfq: fix null pointer dereference at timer expiration
cls_bpf: don't decrement net's refcount when offload fails
net/packet: fix a race in packet_bind() and packet_notifier()
packet: fix crash in fanout_demux_rollover()
sctp: remove extern from stream sched
sctp: force the params with right types for sctp csum apis
sctp: force SCTP_ERROR_INV_STRM with __u32 when calling sctp_chunk_fail
...
|
|
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Tested-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
Values assigned to both variable resend_at and ack_at are overwritten
before they can be used.
The correct fix here is to add 'now' to the previously computed value in
resend_at and ack_at.
Addresses-Coverity-ID: 1462262
Addresses-Coverity-ID: 1462263
Addresses-Coverity-ID: 1462264
Fixes: beb8e5e4f38c ("rxrpc: Express protocol timeouts in terms of RTT")
Link: https://marc.info/?i=17004.1511808959%40warthog.procyon.org.uk
Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
|
|
Repeat terminal ACKs and now terminal ACKs are now generated from the
connection event processor rather from call handling as this allows us to
discard client call structures as soon as possible and free up the channel
for a follow on call.
However, in ACKs so generated, the additional information trailer is
malformed because the padding that's meant to be in the middle isn't
included in what's transmitted.
Fix it so that the 3 bytes of padding are included in the transmission.
Further, the trailer is misaligned because of the padding, so assigment to
the u16 and u32 fields inside it might cause problems on some arches, so
fix this by breaking the padding and the trailer out of the packed struct.
(This also deals with potential compiler weirdies where some of the nested
structs are packed and some aren't).
The symptoms can be seen in wireshark as terminal DUPLICATE or IDLE ACK
packets in which the Max MTU, Interface MTU and rwind fields have weird
values and the Max Packets field is apparently missing.
Reported-by: Jeffrey Altman <jaltman@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
|
|
Clean up some whitespace from rxrpc.
Signed-off-by: David Howells <dhowells@redhat.com>
|
|
q->link.block is not initialized, that leads to EINVAL when one tries to
add filter there. So initialize it properly.
This can be reproduced by:
$ tc qdisc add dev eth0 root handle 1: cbq avpkt 1000 rate 1000Mbit bandwidth 1000Mbit
$ tc filter add dev eth0 parent 1: protocol ip prio 100 u32 match ip protocol 0 0x00 flowid 1:1
Reported-by: Jaroslav Aster <jaster@redhat.com>
Reported-by: Ivan Vecera <ivecera@redhat.com>
Fixes: 6529eaba33f0 ("net: sched: introduce tcf block infractructure")
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Acked-by: Eelco Chaudron <echaudro@redhat.com>
Reviewed-by: Ivan Vecera <ivecera@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
A recent commit (3b4477d2dcf2) converted the sk_state to use
TCP constants. In that change, vmci_transport_handle_detach
was changed such that sk->sk_state was set to TCP_CLOSE before
we test whether it is TCP_SYN_SENT. This change moves the
sk_state change back to the original locations in that function.
Signed-off-by: Jorgen Hansen <jhansen@vmware.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Commit d04adf1b3551 ("sctp: reset owner sk for data chunks on out queues
when migrating a sock") made a mistake that using 'list' as the param of
list_for_each_entry to traverse the retransmit, sacked and abandoned
queues, while chunks are using 'transmitted_list' to link into these
queues.
It could cause NULL dereference panic if there are chunks in any of these
queues when peeling off one asoc.
So use the chunk member 'transmitted_list' instead in this patch.
Fixes: d04adf1b3551 ("sctp: reset owner sk for data chunks on out queues when migrating a sock")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
While converting sch_sfq to use timer_setup(), the commit cdeabbb88134
("net: sched: Convert timers to use timer_setup()") forgot to
initialize the 'sch' field. As a result, the timer callback tries to
dereference a NULL pointer, and the kernel does oops.
Fix it initializing such field at qdisc creation time.
Fixes: cdeabbb88134 ("net: sched: Convert timers to use timer_setup()")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Acked-by: Cong Wang <xiyou.wangcong@gmail.com>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When cls_bpf offload was added it seemed like a good idea to
call cls_bpf_delete_prog() instead of extending the error
handling path, since the software state is fully initialized
at that point. This handling of errors without jumping to
the end of the function is error prone, as proven by later
commit missing that extra call to __cls_bpf_delete_prog().
__cls_bpf_delete_prog() is now expected to be invoked with
a reference on exts->net or the field zeroed out. The call
on the offload's error patch does not fullfil this requirement,
leading to each error stealing a reference on net namespace.
Create a function undoing what cls_bpf_set_parms() did and
use it from __cls_bpf_delete_prog() and the error path.
Fixes: aae2c35ec892 ("cls_bpf: use tcf_exts_get_net() before call_rcu()")
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
syzbot reported crashes [1] and provided a C repro easing bug hunting.
When/if packet_do_bind() calls __unregister_prot_hook() and releases
po->bind_lock, another thread can run packet_notifier() and process an
NETDEV_UP event.
This calls register_prot_hook() and hooks again the socket right before
first thread is able to grab again po->bind_lock.
Fixes this issue by temporarily setting po->num to 0, as suggested by
David Miller.
[1]
dev_remove_pack: ffff8801bf16fa80 not found
------------[ cut here ]------------
kernel BUG at net/core/dev.c:7945! ( BUG_ON(!list_empty(&dev->ptype_all)); )
invalid opcode: 0000 [#1] SMP KASAN
Dumping ftrace buffer:
(ftrace buffer empty)
Modules linked in:
device syz0 entered promiscuous mode
CPU: 0 PID: 3161 Comm: syzkaller404108 Not tainted 4.14.0+ #190
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
task: ffff8801cc57a500 task.stack: ffff8801cc588000
RIP: 0010:netdev_run_todo+0x772/0xae0 net/core/dev.c:7945
RSP: 0018:ffff8801cc58f598 EFLAGS: 00010293
RAX: ffff8801cc57a500 RBX: dffffc0000000000 RCX: ffffffff841f75b2
RDX: 0000000000000000 RSI: 1ffff100398b1ede RDI: ffff8801bf1f8810
device syz0 entered promiscuous mode
RBP: ffff8801cc58f898 R08: 0000000000000001 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: ffff8801bf1f8cd8
R13: ffff8801cc58f870 R14: ffff8801bf1f8780 R15: ffff8801cc58f7f0
FS: 0000000001716880(0000) GS:ffff8801db400000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000020b13000 CR3: 0000000005e25000 CR4: 00000000001406f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
rtnl_unlock+0xe/0x10 net/core/rtnetlink.c:106
tun_detach drivers/net/tun.c:670 [inline]
tun_chr_close+0x49/0x60 drivers/net/tun.c:2845
__fput+0x333/0x7f0 fs/file_table.c:210
____fput+0x15/0x20 fs/file_table.c:244
task_work_run+0x199/0x270 kernel/task_work.c:113
exit_task_work include/linux/task_work.h:22 [inline]
do_exit+0x9bb/0x1ae0 kernel/exit.c:865
do_group_exit+0x149/0x400 kernel/exit.c:968
SYSC_exit_group kernel/exit.c:979 [inline]
SyS_exit_group+0x1d/0x20 kernel/exit.c:977
entry_SYSCALL_64_fastpath+0x1f/0x96
RIP: 0033:0x44ad19
Fixes: 30f7ea1c2b5f ("packet: race condition in packet_bind")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Cc: Francesco Ruggeri <fruggeri@aristanetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
syzkaller found a race condition fanout_demux_rollover() while removing
a packet socket from a fanout group.
po->rollover is read and operated on during packet_rcv_fanout(), via
fanout_demux_rollover(), but the pointer is currently cleared before the
synchronization in packet_release(). It is safer to delay the cleanup
until after synchronize_net() has been called, ensuring all calls to
packet_rcv_fanout() for this socket have finished.
To further simplify synchronization around the rollover structure, set
po->rollover in fanout_add() only if there are no errors. This removes
the need for rcu in the struct and in the call to
packet_getsockopt(..., PACKET_ROLLOVER_STATS, ...).
Crashing stack trace:
fanout_demux_rollover+0xb6/0x4d0 net/packet/af_packet.c:1392
packet_rcv_fanout+0x649/0x7c8 net/packet/af_packet.c:1487
dev_queue_xmit_nit+0x835/0xc10 net/core/dev.c:1953
xmit_one net/core/dev.c:2975 [inline]
dev_hard_start_xmit+0x16b/0xac0 net/core/dev.c:2995
__dev_queue_xmit+0x17a4/0x2050 net/core/dev.c:3476
dev_queue_xmit+0x17/0x20 net/core/dev.c:3509
neigh_connected_output+0x489/0x720 net/core/neighbour.c:1379
neigh_output include/net/neighbour.h:482 [inline]
ip6_finish_output2+0xad1/0x22a0 net/ipv6/ip6_output.c:120
ip6_finish_output+0x2f9/0x920 net/ipv6/ip6_output.c:146
NF_HOOK_COND include/linux/netfilter.h:239 [inline]
ip6_output+0x1f4/0x850 net/ipv6/ip6_output.c:163
dst_output include/net/dst.h:459 [inline]
NF_HOOK.constprop.35+0xff/0x630 include/linux/netfilter.h:250
mld_sendpack+0x6a8/0xcc0 net/ipv6/mcast.c:1660
mld_send_initial_cr.part.24+0x103/0x150 net/ipv6/mcast.c:2072
mld_send_initial_cr net/ipv6/mcast.c:2056 [inline]
ipv6_mc_dad_complete+0x99/0x130 net/ipv6/mcast.c:2079
addrconf_dad_completed+0x595/0x970 net/ipv6/addrconf.c:4039
addrconf_dad_work+0xac9/0x1160 net/ipv6/addrconf.c:3971
process_one_work+0xbf0/0x1bc0 kernel/workqueue.c:2113
worker_thread+0x223/0x1990 kernel/workqueue.c:2247
kthread+0x35e/0x430 kernel/kthread.c:231
ret_from_fork+0x2a/0x40 arch/x86/entry/entry_64.S:432
Fixes: 0648ab70afe6 ("packet: rollover prepare: per-socket state")
Fixes: 509c7a1ecc860 ("packet: avoid panic in packet_getsockopt()")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Mike Maloney <maloney@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Now each stream sched ops is defined in different .c file and
added into the global ops in another .c file, it uses extern
to make this work.
However extern is not good coding style to get them in and
even make C=2 reports errors for this.
This patch adds sctp_sched_ops_xxx_init for each stream sched
ops in their .c file, then get them into the global ops by
calling them when initializing sctp module.
Fixes: 637784ade221 ("sctp: introduce priority based stream scheduler")
Fixes: ac1ed8b82cd6 ("sctp: introduce round robin stream scheduler")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
