| Age | Commit message (Collapse) | Author |
|---|
|
Fixes 9b42c1f179a6, which changed the default route lookup behavior for
tunnel mode SAs in the outbound direction to use the skb mark, whereas
previously mark=0 was used if the output mark was unspecified. In
mark-based routing schemes such as Android’s, this change in default
behavior causes routing loops or lookup failures.
This patch restores the default behavior of using a 0 mark while still
incorporating the skb mark if the SET_MARK (and SET_MARK_MASK) is
specified.
Tested with additions to Android's kernel unit test suite:
https://android-review.googlesource.com/c/kernel/tests/+/860150
Fixes: 9b42c1f179a6 ("xfrm: Extend the output_mark to support input direction and masking")
Signed-off-by: Benedict Wong <benedictwong@google.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
The check assumes that in transport mode, the first templates family
must match the address family of the policy selector.
Syzkaller managed to build a template using MODE_ROUTEOPTIMIZATION,
with ipv4-in-ipv6 chain, leading to following splat:
BUG: KASAN: stack-out-of-bounds in xfrm_state_find+0x1db/0x1854
Read of size 4 at addr ffff888063e57aa0 by task a.out/2050
xfrm_state_find+0x1db/0x1854
xfrm_tmpl_resolve+0x100/0x1d0
xfrm_resolve_and_create_bundle+0x108/0x1000 [..]
Problem is that addresses point into flowi4 struct, but xfrm_state_find
treats them as being ipv6 because it uses templ->encap_family is used
(AF_INET6 in case of reproducer) rather than family (AF_INET).
This patch inverts the logic: Enforce 'template family must match
selector' EXCEPT for tunnel and BEET mode.
In BEET and Tunnel mode, xfrm_tmpl_resolve_one will have remote/local
address pointers changed to point at the addresses found in the template,
rather than the flowi ones, so no oob read will occur.
Reported-by: 3ntr0py1337@gmail.com
Reported-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
With very small change to test script we can trigger softlockup due to
bogus assignment of 'p' (policy to be examined) on restart.
Previously the two to-be-merged nodes had same address/prefixlength pair,
so no erase/reinsert was necessary, we only had to append the list from
node a to b.
If prefix lengths are different, the node has to be deleted and re-inserted
into the tree, with the updated prefix length. This was broken; due to
bogus update to 'p' this loops forever.
Add a 'restart' label and use that instead.
While at it, don't perform the unneeded reinserts of the policies that
are already sorted into the 'new' node.
A previous patch in this series made xfrm_policy_inexact_list_reinsert()
use the relative position indicator to sort policies according to age in
case priorities are identical.
Fixes: 6ac098b2a9d30 ("xfrm: policy: add 2nd-level saddr trees for inexact policies")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
"newpos" has wrong scope. It must be NULL on each iteration of the loop.
Otherwise, when policy is to be inserted at the start, we would instead
insert at point found by the previous loop-iteration instead.
Also, we need to unlink the policy before we reinsert it to the new node,
else we can get next-points-to-self loops.
Because policies are only ordered by priority it is irrelevant which policy
is "more recent" except when two policies have same priority.
(the more recent one is placed after the older one).
In these cases, we can use the ->pos id number to know which one is the
'older': the higher the id, the more recent the policy.
So we only need to unlink all policies from the node that is about to be
removed, and insert them to the replacement node.
Fixes: 9cf545ebd591da ("xfrm: policy: store inexact policies in a tree ordered by destination address")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
An xfrm hash rebuild has to reset the inexact policy list before the
policies get re-inserted: A change of hash thresholds will result in
policies to get moved from inexact tree to the policy hash table.
If the thresholds are increased again later, they get moved from hash
table to inexact tree.
We must unlink all policies from the inexact tree before re-insertion.
Otherwise 'migrate' may find policies that are in main hash table a
second time, when it searches the inexact lists.
Furthermore, re-insertion without deletion can cause elements ->next to
point back to itself, causing soft lockups or double-frees.
Reported-by: syzbot+9d971dd21eb26567036b@syzkaller.appspotmail.com
Fixes: 9cf545ebd591da ("xfrm: policy: store inexact policies in a tree ordered by destination address")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
Hash rebuild will re-set all the inexact entries, then re-insert them.
Lookups that can occur in parallel will therefore not find any policies.
This was safe when lookups were still guarded by rwlock.
After rcu-ification, lookups check the hash_generation seqcount to detect
when a hash resize takes place. Hash rebuild missed the needed increment.
Hash resizes and hash rebuilds cannot occur in parallel (both acquire
hash_resize_mutex), so just increment xfrm_hash_generation, like resize.
Fixes: a7c44247f704e3 ("xfrm: policy: make xfrm_policy_lookup_bytype lockless")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
This function was modeled on the 'exact' insert one, which did not use
the rcu variant either.
When I fixed the 'exact' insert I forgot to propagate this to my
development tree, so the inexact variant retained the bug.
Fixes: 9cf545ebd591d ("xfrm: policy: store inexact policies in a tree ordered by destination address")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
Lots of conflicts, by happily all cases of overlapping
changes, parallel adds, things of that nature.
Thanks to Stephen Rothwell, Saeed Mahameed, and others
for their guidance in these resolutions.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next
Steffen Klassert says:
====================
pull request (net-next): ipsec-next 2018-12-20
Two last patches for this release cycle:
1) Remove an unused variable in xfrm_policy_lookup_bytype().
From YueHaibing.
2) Fix possible infinite loop in __xfrm6_tunnel_alloc_spi().
Also from YueHaibing.
Please pull or let me know if there are problems.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Remove skb->sp and allocate secpath storage via extension
infrastructure. This also reduces sk_buff by 8 bytes on x86_64.
Total size of allyesconfig kernel is reduced slightly, as there is
less inlined code (one conditional atomic op instead of two on
skb_clone).
No differences in throughput in following ipsec performance tests:
- transport mode with aes on 10GB link
- tunnel mode between two network namespaces with aes and null cipher
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
secpath_set is a wrapper for secpath_dup that will not perform
an allocation if the secpath attached to the skb has a reference count
of one, i.e., it doesn't need to be COW'ed.
Also, secpath_dup doesn't attach the secpath to the skb, it leaves
this to the caller.
Use secpath_set in places that immediately assign the return value to
skb.
This allows to remove skb->sp without touching these spots again.
secpath_dup can eventually be removed in followup patch.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Will reduce noise when skb->sp is removed later in this series.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
skb_sec_path gains 'const' qualifier to avoid
xt_policy.c: 'skb_sec_path' discards 'const' qualifier from pointer target type
same reasoning as previous conversions: Won't need to touch these
spots anymore when skb->sp is removed.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
It can only return 0 (success) or -ENOMEM.
Change return value to a pointer to secpath struct.
This avoids direct access to skb->sp:
err = secpath_set(skb);
if (!err) ..
skb->sp-> ...
Becomes:
sp = secpath_set(skb)
if (!sp) ..
sp-> ..
This reduces noise in followup patch which is going to remove skb->sp.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Fixes gcc '-Wunused-but-set-variable' warning:
net/xfrm/xfrm_policy.c: In function 'xfrm_policy_lookup_bytype':
net/xfrm/xfrm_policy.c:2079:6: warning:
variable 'priority' set but not used [-Wunused-but-set-variable]
It not used since commit 6be3b0db6db8 ("xfrm: policy: add inexact policy
search tree infrastructure")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Acked-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec
Steffen Klassert says:
====================
pull request (net): ipsec 2018-12-18
1) Fix error return code in xfrm_output_one()
when no dst_entry is attached to the skb.
From Wei Yongjun.
2) The xfrm state hash bucket count reported to
userspace is off by one. Fix from Benjamin Poirier.
3) Fix NULL pointer dereference in xfrm_input when
skb_dst_force clears the dst_entry.
4) Fix freeing of xfrm states on acquire. We use a
dedicated slab cache for the xfrm states now,
so free it properly with kmem_cache_free.
From Mathias Krause.
Please pull or let me know if there are problems.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Dan Carpenter reports following static checker warning:
net/xfrm/xfrm_policy.c:1316 xfrm_hash_rebuild()
warn: 'dir' is out of bounds '3' vs '2'
| 1280 /* reset the bydst and inexact table in all directions */
| 1281 xfrm_hash_reset_inexact_table(net);
| 1282
| 1283 for (dir = 0; dir < XFRM_POLICY_MAX; dir++) {
| ^^^^^^^^^^^^^^^^^^^^^
|dir == XFRM_POLICY_MAX at the end of this loop.
| 1304 /* re-insert all policies by order of creation */
| 1305 list_for_each_entry_reverse(policy, &net->xfrm.policy_all, walk.all) {
[..]
| 1314 xfrm_policy_id2dir(policy->index));
| 1315 if (!chain) {
| 1316 void *p = xfrm_policy_inexact_insert(policy, dir, 0);
Fix this by updating 'dir' based on current policy. Otherwise, the
inexact policies won't be found anymore during lookup, as they get
hashed to a bogus bin.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Fixes: cc1bb845adc9 ("xfrm: policy: return NULL when inexact search needed")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
Commit 565f0fa902b6 ("xfrm: use a dedicated slab cache for struct
xfrm_state") moved xfrm state objects to use their own slab cache.
However, it missed to adapt xfrm_user to use this new cache when
freeing xfrm states.
Fix this by introducing and make use of a new helper for freeing
xfrm_state objects.
Fixes: 565f0fa902b6 ("xfrm: use a dedicated slab cache for struct xfrm_state")
Reported-by: Pan Bian <bianpan2016@163.com>
Cc: <stable@vger.kernel.org> # v4.18+
Signed-off-by: Mathias Krause <minipli@googlemail.com>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
the dst_entry.
Since commit 222d7dbd258d ("net: prevent dst uses after free")
skb_dst_force() might clear the dst_entry attached to the skb.
The xfrm code doesn't expect this to happen, so we crash with
a NULL pointer dereference in this case.
Fix it by checking skb_dst(skb) for NULL after skb_dst_force()
and drop the packet in case the dst_entry was cleared. We also
move the skb_dst_force() to a codepath that is not used when
the transformation was offloaded, because in this case we
don't have a dst_entry attached to the skb.
The output and forwarding path was already fixed by
commit 9e1437937807 ("xfrm: Fix NULL pointer dereference when
skb_dst_force clears the dst_entry.")
Fixes: 222d7dbd258d ("net: prevent dst uses after free")
Reported-by: Jean-Philippe Menil <jpmenil@gmail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
Colin Ian King says:
Static analysis with CoverityScan found a potential issue [..]
It seems that pointer pol is set to NULL and then a check to see if it
is non-null is used to set pol to tmp; howeverm this check is always
going to be false because pol is always NULL.
Fix this and update test script to catch this. Updated script only:
./xfrm_policy.sh ; echo $?
RTNETLINK answers: No such file or directory
FAIL: ip -net ns3 xfrm policy get src 10.0.1.0/24 dst 10.0.2.0/24 dir out
RTNETLINK answers: No such file or directory
[..]
PASS: policy before exception matches
PASS: ping to .254 bypassed ipsec tunnel
PASS: direct policy matches
PASS: policy matches
1
Fixes: 6be3b0db6db ("xfrm: policy: add inexact policy search tree infrastructure")
Reported-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
There is a missing indentation before the goto statement. Add it.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
This adds the fourth and final search class, containing policies
where both saddr and daddr have prefix lengths (i.e., not wildcards).
Inexact policies now end up in one of the following four search classes:
1. "Any:Any" list, containing policies where both saddr and daddr are
wildcards or have very coarse prefixes, e.g. 10.0.0.0/8 and the like.
2. "saddr:any" list, containing policies with a fixed saddr/prefixlen,
but without destination restrictions.
These lists are stored in rbtree nodes; each node contains those
policies matching saddr/prefixlen.
3. "Any:daddr" list. Similar to 2), except for policies where only the
destinations are specified.
4. "saddr:daddr" lists, containing only those policies that
match the given source/destination network.
The root of the saddr/daddr nodes gets stored in the nodes of the
'daddr' tree.
This diagram illustrates the list classes, and their
placement in the lookup hierarchy:
xfrm_pol_inexact_bin = hash(dir,type,family,if_id);
|
+---- root_d: sorted by daddr:prefix
| |
| xfrm_pol_inexact_node
| |
| +- root: sorted by saddr/prefix
| | |
| | xfrm_pol_inexact_node
| | |
| | + root: unused
| | |
| | + hhead: saddr:daddr policies
| |
| +- coarse policies and all any:daddr policies
|
+---- root_s: sorted by saddr:prefix
| |
| xfrm_pol_inexact_node
| |
| + root: unused
| |
| + hhead: saddr:any policies
|
+---- coarse policies and all any:any policies
lookup for an inexact policy returns pointers to the four relevant list
classes, after which each of the lists needs to be searched for the policy
with the higher priority.
This will only speed up lookups in case we have many policies and a
sizeable portion of these have disjunct saddr/daddr addresses.
Signed-off-by: Florian Westphal <fw@strlen.de>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
This adds the 'saddr:any' search class. It contains all policies that have
a fixed saddr/prefixlen, but 'any' destination.
Signed-off-by: Florian Westphal <fw@strlen.de>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
validate the re-inserted policies match the lookup node.
Policies that fail this test won't be returned in the candidate set.
This is enabled by default for now, it should not cause noticeable
reinsert slow down.
Such reinserts are needed when we have to merge an existing node
(e.g. for 10.0.0.0/28 because a overlapping subnet was added (e.g.
10.0.0.0/24), so whenever this happens existing policies have to
be placed on the list of the new node.
Signed-off-by: Florian Westphal <fw@strlen.de>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
This adds inexact lists per destination network, stored in a search tree.
Inexact lookups now return two 'candidate lists', the 'any' policies
('any' destionations), and a list of policies that share same
daddr/prefix.
Next patch will add a second search tree for 'saddr:any' policies
so we can avoid placing those on the 'any:any' list too.
Signed-off-by: Florian Westphal <fw@strlen.de>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
At this time inexact policies are all searched in-order until the first
match is found. After removal of the flow cache, this resolution has
to be performed for every packetm resulting in major slowdown when
number of inexact policies is high.
This adds infrastructure to later sort inexact policies into a tree.
This only introduces a single class: any:any.
Next patch will add a search tree to pre-sort policies that
have a fixed daddr/prefixlen, so in this patch the any:any class
will still be used for all policies.
Signed-off-by: Florian Westphal <fw@strlen.de>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
This avoids searches of polices that cannot match in the first
place due to different interface id by placing them in different bins.
Signed-off-by: Florian Westphal <fw@strlen.de>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
Switch packet-path lookups for inexact policies to rhashtable.
In this initial version, we now no longer need to search policies with
non-matching address family and type.
Next patch will add the if_id as well so lookups from the xfrm interface
driver only need to search inexact policies for that device.
Future patches will augment the hlist in each rhash bucket with a tree
and pre-sort policies according to daddr/prefix.
A single rhashtable is used. In order to avoid a full rhashtable walk on
netns exit, the bins get placed on a pernet list, i.e. we add almost no
cost for network namespaces that had no xfrm policies.
The inexact lists are kept in place, and policies are added to both the
per-rhash-inexact list and a pernet one.
The latter is needed for the control plane to handle migrate -- these
requests do not consider the if_id, so if we'd remove the inexact_list
now we would have to search all hash buckets and then figure
out which matching policy candidate is the most recent one -- this appears
a bit harder than just keeping the 'old' inexact list for this purpose.
Signed-off-by: Florian Westphal <fw@strlen.de>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
currently policy_hash_bysel() returns the hash bucket list
(for exact policies), or the inexact list (when policy uses a prefix).
Searching this inexact list is slow, so it might be better to pre-sort
inexact lists into a tree or another data structure for faster
searching.
However, due to 'any' policies, that need to be searched in any case,
doing so will require that 'inexact' policies need to be handled
specially to decide the best search strategy. So change hash_bysel()
and return NULL if the policy can't be handled via the policy hash
table.
Right now, we simply use the inexact list when this happens, but
future patch can then implement a different strategy.
Signed-off-by: Florian Westphal <fw@strlen.de>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
... so we can reuse this later without code duplication when we add
policy to a second inexact list.
Signed-off-by: Florian Westphal <fw@strlen.de>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
currently all non-socket policies are either hashed in the dst table,
or placed on the 'inexact list'. When flushing, we first walk the
table, then the (per-direction) inexact lists.
When we try and get rid of the inexact lists to having "n" inexact
lists (e.g. per-af inexact lists, or sorted into a tree), this walk
would become more complicated.
Simplify this: walk the 'all' list and skip socket policies during
traversal so we don't need to handle exact and inexact policies
separately anymore.
Signed-off-by: Florian Westphal <fw@strlen.de>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
sadhcnt is reported by `ip -s xfrm state count` as "buckets count", not the
hash mask.
Fixes: 28d8909bc790 ("[XFRM]: Export SAD info.")
Signed-off-by: Benjamin Poirier <bpoirier@suse.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Ingo Molnar:
"A number of fixes and some late updates:
- make in_compat_syscall() behavior on x86-32 similar to other
platforms, this touches a number of generic files but is not
intended to impact non-x86 platforms.
- objtool fixes
- PAT preemption fix
- paravirt fixes/cleanups
- cpufeatures updates for new instructions
- earlyprintk quirk
- make microcode version in sysfs world-readable (it is already
world-readable in procfs)
- minor cleanups and fixes"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
compat: Cleanup in_compat_syscall() callers
x86/compat: Adjust in_compat_syscall() to generic code under !COMPAT
objtool: Support GCC 9 cold subfunction naming scheme
x86/numa_emulation: Fix uniform-split numa emulation
x86/paravirt: Remove unused _paravirt_ident_32
x86/mm/pat: Disable preemption around __flush_tlb_all()
x86/paravirt: Remove GPL from pv_ops export
x86/traps: Use format string with panic() call
x86: Clean up 'sizeof x' => 'sizeof(x)'
x86/cpufeatures: Enumerate MOVDIR64B instruction
x86/cpufeatures: Enumerate MOVDIRI instruction
x86/earlyprintk: Add a force option for pciserial device
objtool: Support per-function rodata sections
x86/microcode: Make revision and processor flags world-readable
|
|
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Pull networking fixes from David Miller:
1) BPF verifier fixes from Daniel Borkmann.
2) HNS driver fixes from Huazhong Tan.
3) FDB only works for ethernet devices, reject attempts to install FDB
rules for others. From Ido Schimmel.
4) Fix spectre V1 in vhost, from Jason Wang.
5) Don't pass on-stack object to irq_set_affinity_hint() in mvpp2
driver, from Marc Zyngier.
6) Fix mlx5e checksum handling when RXFCS is enabled, from Eric
Dumazet.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (49 commits)
openvswitch: Fix push/pop ethernet validation
net: stmmac: Fix stmmac_mdio_reset() when building stmmac as modules
bpf: test make sure to run unpriv test cases in test_verifier
bpf: add various test cases to test_verifier
bpf: don't set id on after map lookup with ptr_to_map_val return
bpf: fix partial copy of map_ptr when dst is scalar
libbpf: Fix compile error in libbpf_attach_type_by_name
kselftests/bpf: use ping6 as the default ipv6 ping binary if it exists
selftests: mlxsw: qos_mc_aware: Add a test for UC awareness
selftests: mlxsw: qos_mc_aware: Tweak for min shaper
mlxsw: spectrum: Set minimum shaper on MC TCs
mlxsw: reg: QEEC: Add minimum shaper fields
net: hns3: bugfix for rtnl_lock's range in the hclgevf_reset()
net: hns3: bugfix for rtnl_lock's range in the hclge_reset()
net: hns3: bugfix for handling mailbox while the command queue reinitialized
net: hns3: fix incorrect return value/type of some functions
net: hns3: bugfix for hclge_mdio_write and hclge_mdio_read
net: hns3: bugfix for is_valid_csq_clean_head()
net: hns3: remove unnecessary queue reset in the hns3_uninit_all_ring()
net: hns3: bugfix for the initialization of command queue's spin lock
...
|
|
Now that in_compat_syscall() is consistent on all architectures and does
not longer report true on native i686, the workarounds (ifdeffery and
helpers) can be removed.
Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Dmitry Safonov <0x7f454c46@gmail.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Andy Lutomirsky <luto@kernel.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: John Stultz <john.stultz@linaro.org>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: linux-efi@vger.kernel.org
Cc: netdev@vger.kernel.org
Link: https://lkml.kernel.org/r/20181012134253.23266-3-dima@arista.com
|
|
Based on the original work from Arnd Bergmann.
When XFRM_ALGO is not enabled, the new ixgbe IPsec code produces a
link error:
drivers/net/ethernet/intel/ixgbe/ixgbe_ipsec.o: In function `ixgbe_ipsec_vf_add_sa':
ixgbe_ipsec.c:(.text+0x1266): undefined reference to `xfrm_aead_get_byname'
Simply selecting XFRM_ALGO from here causes circular dependencies, so
to fix it, we probably want this slightly more complex solution that is
similar to what other drivers with XFRM offload do:
A separate Kconfig symbol now controls whether we include the IPsec
offload code. To keep the old behavior, this is left as 'default y'. The
dependency in XFRM_OFFLOAD still causes a circular dependency but is
not actually needed because this symbol is not user visible, so removing
that dependency on top makes it all work.
CC: Arnd Bergmann <arnd@arndb.de>
CC: Shannon Nelson <shannon.nelson@oracle.com>
Fixes: eda0333ac293 ("ixgbe: add VF IPsec management")
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
|
|
Move remaining definitions and declarations from include/linux/bootmem.h
into include/linux/memblock.h and remove the redundant header.
The includes were replaced with the semantic patch below and then
semi-automated removal of duplicated '#include <linux/memblock.h>
@@
@@
- #include <linux/bootmem.h>
+ #include <linux/memblock.h>
[sfr@canb.auug.org.au: dma-direct: fix up for the removal of linux/bootmem.h]
Link: http://lkml.kernel.org/r/20181002185342.133d1680@canb.auug.org.au
[sfr@canb.auug.org.au: powerpc: fix up for removal of linux/bootmem.h]
Link: http://lkml.kernel.org/r/20181005161406.73ef8727@canb.auug.org.au
[sfr@canb.auug.org.au: x86/kaslr, ACPI/NUMA: fix for linux/bootmem.h removal]
Link: http://lkml.kernel.org/r/20181008190341.5e396491@canb.auug.org.au
Link: http://lkml.kernel.org/r/1536927045-23536-30-git-send-email-rppt@linux.vnet.ibm.com
Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Guan Xuetao <gxt@pku.edu.cn>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "James E.J. Bottomley" <jejb@parisc-linux.org>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Ley Foon Tan <lftan@altera.com>
Cc: Mark Salter <msalter@redhat.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Palmer Dabbelt <palmer@sifive.com>
Cc: Paul Burton <paul.burton@mips.com>
Cc: Richard Kuo <rkuo@codeaurora.org>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rich Felker <dalias@libc.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Serge Semin <fancer.lancer@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
xfrm_output_one() does not return a error code when there is
no dst_entry attached to the skb, it is still possible crash
with a NULL pointer dereference in xfrm_output_resume(). Fix
it by return error code -EHOSTUNREACH.
Fixes: 9e1437937807 ("xfrm: Fix NULL pointer dereference when skb_dst_force clears the dst_entry.")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
net/sched/cls_api.c has overlapping changes to a call to
nlmsg_parse(), one (from 'net') added rtm_tca_policy instead of NULL
to the 5th argument, and another (from 'net-next') added cb->extack
instead of NULL to the 6th argument.
net/ipv4/ipmr_base.c is a case of a bug fix in 'net' being done to
code which moved (to mr_table_dump)) in 'net-next'. Thanks to David
Ahern for the heads up.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next
Steffen Klassert says:
====================
pull request (net-next): ipsec-next 2018-10-18
1) Remove an unnecessary dev->tstats check in xfrmi_get_stats64.
From Li RongQing.
2) We currently do a sizeof(element) instead of a sizeof(array)
check when initializing the ovec array of the secpath.
Currently this array can have only one element, so code is
OK but error-prone. Change this to do a sizeof(array)
check so that we can add more elements in future.
From Li RongQing.
3) Improve xfrm IPv6 address hashing by using the complete IPv6
addresses for a hash. From Michal Kubecek.
Please pull or let me know if there are problems.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In some environments it is common that many hosts share the same lower half
of their IPv6 addresses (in particular ::1). As __xfrm6_addr_hash() and
__xfrm6_daddr_saddr_hash() calculate the hash only from the lower halves,
as much as 1/3 of the hosts ends up in one hashtable chain which harms the
performance.
Use complete IPv6 addresses when calculating the hashes. Rather than just
adding two more words to the xor, use jhash2() for consistency with
__xfrm6_pref_hash() and __xfrm6_dpref_spref_hash().
Signed-off-by: Michal Kubecek <mkubecek@suse.cz>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
bydst table/list lookups use rcu, so insertions must use rcu versions.
Fixes: a7c44247f704e ("xfrm: policy: make xfrm_policy_lookup_bytype lockless")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
Make sure extack is passed to nlmsg_parse where easy to do so.
Most of these are dump handlers and leveraging the extack in
the netlink_callback.
Signed-off-by: David Ahern <dsahern@gmail.com>
Acked-by: Christian Brauner <christian@brauner.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This place should want to initialize array, not a element,
so it should be sizeof(array) instead of sizeof(element)
but now this array only has one element, so no error in
this condition that XFRM_MAX_OFFLOAD_DEPTH is 1
Signed-off-by: Li RongQing <lirongqing@baidu.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
if tstats of a device is not allocated, this device is not
registered correctly and can not be used.
Signed-off-by: Li RongQing <lirongqing@baidu.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
Minor conflict in net/core/rtnetlink.c, David Ahern's bug fix in 'net'
overlapped the renaming of a netlink attribute in net-next.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The device gro_cells has been initialized, it should be freed,
otherwise it will be leaked
Fixes: f203b76d78092faf2 ("xfrm: Add virtual xfrm interfaces")
Signed-off-by: Zhang Yu <zhangyu31@baidu.com>
Signed-off-by: Li RongQing <lirongqing@baidu.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next
Steffen Klassert says:
====================
pull request (net-next): ipsec-next 2018-10-01
1) Make xfrmi_get_link_net() static to silence a sparse warning.
From Wei Yongjun.
2) Remove a unused esph pointer definition in esp_input().
From Haishuang Yan.
3) Allow the NIC driver to quietly refuse xfrm offload
in case it does not support it, the SA is created
without offload in this case.
From Shannon Nelson.
Please pull or let me know if there are problems.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec
Steffen Klassert says:
====================
pull request (net): ipsec 2018-10-01
1) Validate address prefix lengths in the xfrm selector,
otherwise we may hit undefined behaviour in the
address matching functions if the prefix is too
big for the given address family.
2) Fix skb leak on local message size errors.
From Thadeu Lima de Souza Cascardo.
3) We currently reset the transport header back to the network
header after a transport mode transformation is applied. This
leads to an incorrect transport header when multiple transport
mode transformations are applied. Reset the transport header
only after all transformations are already applied to fix this.
From Sowmini Varadhan.
4) We only support one offloaded xfrm, so reset crypto_done after
the first transformation in xfrm_input(). Otherwise we may call
the wrong input method for subsequent transformations.
From Sowmini Varadhan.
5) Fix NULL pointer dereference when skb_dst_force clears the dst_entry.
skb_dst_force does not really force a dst refcount anymore, it might
clear it instead. xfrm code did not expect this, add a check to not
dereference skb_dst() if it was cleared by skb_dst_force.
6) Validate xfrm template mode, otherwise we can get a stack-out-of-bounds
read in xfrm_state_find. From Sean Tranchetti.
Please pull or let me know if there are problems.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
