summaryrefslogtreecommitdiff
path: root/net/wireless
AgeCommit message (Collapse)Author
2017-05-19wireless: Require HANDLE_DFS flag to switch channel for non-AP modeBenjamin Berg
In the case the channel should be switched to one requiring DFS we need to make sure that userspace will handle radar events when they happen. For AP mode this is assumed to be the case, as a manager like hostapd is required. However IBSS and MESH modes can work without further userspace assistance, so refuse to use DFS channels unless userspace vouches that it handles DFS. NOTE: Userspace should have already flagged support earlier during mesh or IBSS setup. However, this information is not readily accessible currently. Signed-off-by: Benjamin Berg <benjamin@sipsolutions.net> [sw: style cleanups] Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-05-19wireless: Only join DFS channels in mesh mode if userspace flags supportBenjamin Berg
When joining a mesh network it is not guaranteed that userspace has a daemon listening for radar events. This is however required for channels requiring DFS. To flag that userspace will handle radar events, it needs to set NL80211_ATTR_HANDLE_DFS. This matches the current mechanism used for IBSS mode. Signed-off-by: Benjamin Berg <benjamin@sipsolutions.net> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-05-17cfg80211: improve warnings in VHT rate calculationJohannes Berg
Linus reported hitting the bandwidth warning, but it is indeed pretty useless - improve it by printing the rate configuration and make it only warn once, for both warnings here. Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-05-17mac80211: strictly check mesh address extension modeRajkumar Manoharan
Mesh forwarding path checks for address extension mode to fetch appropriate proxied address and MPP address. Existing condition that looks for 6 address format is not strict enough so that frames with improper values are processed and invalid entries are added into MPP table. Fix that by adding a stricter check before processing the packet. Per IEEE Std 802.11s-2011 spec. Table 7-6g1 lists address extension mode 0x3 as reserved one. And also Table Table 9-13 does not specify 0x3 as valid address field. Fixes: 9b395bc3be1c ("mac80211: verify that skb data is present") Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-05-08nl80211: correctly validate MU-MIMO groupsJohannes Berg
Since groups 0 and 63 are invalid, we should check for those bits. Note that the 802.11 spec specifies the *bit* order, but the CPU doesn't care about bit order since it can't address bits, so it's always treating BIT(0) as the lowest bit within a byte. Reported-by: Jan Fuchs <jan.fuchs@lancom.de> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-04-28cfg80211: add request id to cfg80211_sched_scan_*() apiArend Van Spriel
Have proper request id filled in the SCHED_SCAN_RESULTS and SCHED_SCAN_STOPPED notifications toward user-space by having the driver provide it through the api. Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by: Franky Lin <franky.lin@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-04-28cfg80211: unify cfg80211_roamed() and cfg80211_roamed_bss()Avraham Stern
cfg80211_roamed() and cfg80211_roamed_bss() take the same arguments except that cfg80211_roamed() requires the BSSID and cfg80211_roamed_bss() requires the bss entry. Unify the two functions by using a struct for driver initiated roaming information so that either the BSSID or the bss entry can be passed as an argument to the unified function. Signed-off-by: Avraham Stern <avraham.stern@intel.com> [modified the ath6k, brcm80211, rndis and wlan-ng drivers accordingly] Signed-off-by: Luca Coelho <luciano.coelho@intel.com> [modify brcmfmac to remove the useless cast, spotted by Arend] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-04-26cfg80211: add request id parameter to .sched_scan_stop() signatureArend Van Spriel
For multiple scheduled scan support the driver needs to know which scheduled scan request is being stopped. Pass the request id in the .sched_scan_stop() callback. Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by: Franky Lin <franky.lin@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-04-26nl80211: add support for BSSIDs in scheduled scan matchsetsArend Van Spriel
This patch allows for the scheduled scan request to specify matchsets for specific BSSIDs. Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by: Franky Lin <franky.lin@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> [docs, netlink policy fix] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-04-26nl80211: allow multiple active scheduled scan requestsArend Van Spriel
This patch implements the idea to have multiple scheduled scan requests running concurrently. It mainly illustrates how to deal with the incoming request from user-space in terms of backward compatibility. In order to use multiple scheduled scans user-space needs to provide a flag attribute NL80211_ATTR_SCHED_SCAN_MULTI to indicate support. If not the request is treated as a legacy scan. Drivers currently supporting scheduled scan are now indicating they support a single scheduled scan request. This obsoletes WIPHY_FLAG_SUPPORTS_SCHED_SCAN. Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by: Franky Lin <franky.lin@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> [clean up netlink destroy path to avoid allocations, code cleanups] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-04-26cfg80211: simplify netlink socket owner interface deletionJohannes Berg
There's no need to allocate a portid structure and then, for each of those, walk the interfaces - we can just add a flag to each interface and walk those directly. Due to padding in the struct, we can even do it without any memory cost, and it even simplifies the code. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-04-25cfg80211: Fix dfs state propagation for non-DFS center channelVasanthakumar Thiagarajan
When part of a bigger bandwidth (160 MHz) channel falls in DFS channel range it is possible that the center frequency may not necessarily be a radar channel. Remove the sanity check on channel flag for IEEE80211_CHAN_RADAR in regulatory_propagate_dfs_state(), this should fix the dfs state propagation for non-DFS center freq which has DFS channels in it's bandwidth, should also fix unnecessary WARN_ON() spam in regulatory_propagate_dfs_state(). Fixes: 8976672736d6 ("cfg80211: Share Channel DFS state across wiphys of same DFS domain") Reported-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qti.qualcomm.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-04-20Merge tag 'mac80211-next-for-davem-2017-04-18' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next Johannes Berg says: ==================== My last pull request has been a while, we now have: * connection quality monitoring with multiple thresholds * support for FILS shared key authentication offload * pre-CAC regulatory compliance - only ETSI allows this * sanity check for some rate confusion that hit ChromeOS (but nobody else uses it, evidently) * some documentation updates * lots of cleanups ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-18nl80211: Fix enum type of variable in nl80211_put_sta_rate()Matthias Kaehlcke
rate_flg is of type 'enum nl80211_attrs', however it is assigned with 'enum nl80211_rate_info' values. Change the type of rate_flg accordingly. Signed-off-by: Matthias Kaehlcke <mka@chromium.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-04-18cfg80211: Fix array-bounds warning in fragment copyMatthias Kaehlcke
__ieee80211_amsdu_copy_frag intentionally initializes a pointer to array[-1] to increment it later to valid values. clang rightfully generates an array-bounds warning on the initialization statement. Initialize the pointer to array[0] and change the algorithm from increment before to increment after consume. Signed-off-by: Matthias Kaehlcke <mka@chromium.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-04-18nl80211: add request id in scheduled scan event messagesArend Van Spriel
For multi-scheduled scan support in subsequent patch a request id will be added. This patch add this request id to the scheduled scan event messages. For now the request id will always be zero. With multi-scheduled scan its value will inform user-space to which scan the event relates. Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by: Franky Lin <franky.lin@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-04-13netlink: pass extended ACK struct where availableJohannes Berg
This is an add-on to the previous patch that passes the extended ACK structure where it's already available by existing genl_info or extack function arguments. This was done with this spatch (with some manual adjustment of indentation): @@ expression A, B, C, D, E; identifier fn, info; @@ fn(..., struct genl_info *info, ...) { ... -nlmsg_parse(A, B, C, D, E, NULL) +nlmsg_parse(A, B, C, D, E, info->extack) ... } @@ expression A, B, C, D, E; identifier fn, info; @@ fn(..., struct genl_info *info, ...) { <... -nla_parse_nested(A, B, C, D, NULL) +nla_parse_nested(A, B, C, D, info->extack) ...> } @@ expression A, B, C, D, E; identifier fn, extack; @@ fn(..., struct netlink_ext_ack *extack, ...) { <... -nlmsg_parse(A, B, C, D, E, NULL) +nlmsg_parse(A, B, C, D, E, extack) ...> } @@ expression A, B, C, D, E; identifier fn, extack; @@ fn(..., struct netlink_ext_ack *extack, ...) { <... -nla_parse(A, B, C, D, E, NULL) +nla_parse(A, B, C, D, E, extack) ...> } @@ expression A, B, C, D, E; identifier fn, extack; @@ fn(..., struct netlink_ext_ack *extack, ...) { ... -nlmsg_parse(A, B, C, D, E, NULL) +nlmsg_parse(A, B, C, D, E, extack) ... } @@ expression A, B, C, D; identifier fn, extack; @@ fn(..., struct netlink_ext_ack *extack, ...) { <... -nla_parse_nested(A, B, C, D, NULL) +nla_parse_nested(A, B, C, D, extack) ...> } @@ expression A, B, C, D; identifier fn, extack; @@ fn(..., struct netlink_ext_ack *extack, ...) { <... -nlmsg_validate(A, B, C, D, NULL) +nlmsg_validate(A, B, C, D, extack) ...> } @@ expression A, B, C, D; identifier fn, extack; @@ fn(..., struct netlink_ext_ack *extack, ...) { <... -nla_validate(A, B, C, D, NULL) +nla_validate(A, B, C, D, extack) ...> } @@ expression A, B, C; identifier fn, extack; @@ fn(..., struct netlink_ext_ack *extack, ...) { <... -nla_validate_nested(A, B, C, NULL) +nla_validate_nested(A, B, C, extack) ...> } Signed-off-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-13netlink: pass extended ACK struct to parsing functionsJohannes Berg
Pass the new extended ACK reporting struct to all of the generic netlink parsing functions. For now, pass NULL in almost all callers (except for some in the core.) Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-13cfg80211: refactor nl80211 monitor option parsingJohannes Berg
Refactor the parsing of monitor flags and the MU-MIMO options. This will allow adding more things cleanly in the future and also allows setting the latter already when creating a monitor interface. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-04-13cfg80211: move add/change interface monitor flags into paramsJohannes Berg
Instead passing both flags, which can be NULL, and vif_params, which are never NULL, move the flags into the vif_params and use BIT(0), which is invalid from userspace, to indicate that the flags were changed. While updating all drivers, fix a small bug in wil6210 where it was setting the flags to 0 instead of leaving them unchanged. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-04-13cfg80211: allow leaving MU-MIMO monitor configuration unchangedJohannes Berg
When changing monitor parameters, not setting the MU-MIMO attributes should mean that they're not changed - it's documented that to turn the feature off it's necessary to set all-zero group membership and an invalid follow-address. This isn't implemented. Fix this by making the parameters pointers, stop reusing the macaddr struct member, and documenting that NULL pointers mean unchanged. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-03-31cfg80211: Add support for FILS shared key authentication offloadVidyullatha Kanchanapally
Enhance nl80211 and cfg80211 connect request and response APIs to support FILS shared key authentication offload. The new nl80211 attributes can be used to provide additional information to the driver to establish a FILS connection. Also enhance the set/del PMKSA to allow support for adding and deleting PMKSA based on FILS cache identifier. Add a new feature flag that drivers can use to advertize support for FILS shared key authentication and association in station mode when using their own SME. Signed-off-by: Vidyullatha Kanchanapally <vkanchan@qti.qualcomm.com> Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-03-31cfg80211: Use a structure to pass connect response paramsVidyullatha Kanchanapally
Currently the connect event from driver takes all the connection response parameters as arguments. With support for new features these response parameters can grow. Use a structure to pass these parameters rather than passing them as function arguments. Signed-off-by: Vidyullatha Kanchanapally <vkanchan@qti.qualcomm.com> Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> [add to documentation] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-03-29cfg80211: check rdev resume callback only for registered wiphyArend Van Spriel
We got the following use-after-free KASAN report: BUG: KASAN: use-after-free in wiphy_resume+0x591/0x5a0 [cfg80211] at addr ffff8803fc244090 Read of size 8 by task kworker/u16:24/2587 CPU: 6 PID: 2587 Comm: kworker/u16:24 Tainted: G B 4.9.13-debug+ Hardware name: Dell Inc. XPS 15 9550/0N7TVV, BIOS 1.2.19 12/22/2016 Workqueue: events_unbound async_run_entry_fn ffff880425d4f9d8 ffffffffaeedb541 ffff88042b80ef00 ffff8803fc244088 ffff880425d4fa00 ffffffffae84d7a1 ffff880425d4fa98 ffff8803fc244080 ffff88042b80ef00 ffff880425d4fa88 ffffffffae84da3a ffffffffc141f7d9 Call Trace: [<ffffffffaeedb541>] dump_stack+0x85/0xc4 [<ffffffffae84d7a1>] kasan_object_err+0x21/0x70 [<ffffffffae84da3a>] kasan_report_error+0x1fa/0x500 [<ffffffffc141f7d9>] ? cfg80211_bss_age+0x39/0xc0 [cfg80211] [<ffffffffc141f83a>] ? cfg80211_bss_age+0x9a/0xc0 [cfg80211] [<ffffffffae48d46d>] ? trace_hardirqs_on+0xd/0x10 [<ffffffffc13fb1c0>] ? wiphy_suspend+0xc70/0xc70 [cfg80211] [<ffffffffae84def1>] __asan_report_load8_noabort+0x61/0x70 [<ffffffffc13fb100>] ? wiphy_suspend+0xbb0/0xc70 [cfg80211] [<ffffffffc13fb751>] ? wiphy_resume+0x591/0x5a0 [cfg80211] [<ffffffffc13fb751>] wiphy_resume+0x591/0x5a0 [cfg80211] [<ffffffffc13fb1c0>] ? wiphy_suspend+0xc70/0xc70 [cfg80211] [<ffffffffaf3b206e>] dpm_run_callback+0x6e/0x4f0 [<ffffffffaf3b31b2>] device_resume+0x1c2/0x670 [<ffffffffaf3b367d>] async_resume+0x1d/0x50 [<ffffffffae3ee84e>] async_run_entry_fn+0xfe/0x610 [<ffffffffae3d0666>] process_one_work+0x716/0x1a50 [<ffffffffae3d05c9>] ? process_one_work+0x679/0x1a50 [<ffffffffafdd7b6d>] ? _raw_spin_unlock_irq+0x3d/0x60 [<ffffffffae3cff50>] ? pwq_dec_nr_in_flight+0x2b0/0x2b0 [<ffffffffae3d1a80>] worker_thread+0xe0/0x1460 [<ffffffffae3d19a0>] ? process_one_work+0x1a50/0x1a50 [<ffffffffae3e54c2>] kthread+0x222/0x2e0 [<ffffffffae3e52a0>] ? kthread_park+0x80/0x80 [<ffffffffae3e52a0>] ? kthread_park+0x80/0x80 [<ffffffffae3e52a0>] ? kthread_park+0x80/0x80 [<ffffffffafdd86aa>] ret_from_fork+0x2a/0x40 Object at ffff8803fc244088, in cache kmalloc-1024 size: 1024 Allocated: PID = 71 save_stack_trace+0x1b/0x20 save_stack+0x46/0xd0 kasan_kmalloc+0xad/0xe0 kasan_slab_alloc+0x12/0x20 __kmalloc_track_caller+0x134/0x360 kmemdup+0x20/0x50 brcmf_cfg80211_attach+0x10b/0x3a90 [brcmfmac] brcmf_bus_start+0x19a/0x9a0 [brcmfmac] brcmf_pcie_setup+0x1f1a/0x3680 [brcmfmac] brcmf_fw_request_nvram_done+0x44c/0x11b0 [brcmfmac] request_firmware_work_func+0x135/0x280 process_one_work+0x716/0x1a50 worker_thread+0xe0/0x1460 kthread+0x222/0x2e0 ret_from_fork+0x2a/0x40 Freed: PID = 2568 save_stack_trace+0x1b/0x20 save_stack+0x46/0xd0 kasan_slab_free+0x71/0xb0 kfree+0xe8/0x2e0 brcmf_cfg80211_detach+0x62/0xf0 [brcmfmac] brcmf_detach+0x14a/0x2b0 [brcmfmac] brcmf_pcie_remove+0x140/0x5d0 [brcmfmac] brcmf_pcie_pm_leave_D3+0x198/0x2e0 [brcmfmac] pci_pm_resume+0x186/0x220 dpm_run_callback+0x6e/0x4f0 device_resume+0x1c2/0x670 async_resume+0x1d/0x50 async_run_entry_fn+0xfe/0x610 process_one_work+0x716/0x1a50 worker_thread+0xe0/0x1460 kthread+0x222/0x2e0 ret_from_fork+0x2a/0x40 Memory state around the buggy address: ffff8803fc243f80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffff8803fc244000: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc >ffff8803fc244080: fc fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff8803fc244100: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff8803fc244180: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb What is happening is that brcmf_pcie_resume() detects a device that is no longer responsive and it decides to unbind resulting in a wiphy_unregister() and wiphy_free() call. Now the wiphy instance remains allocated, because PM needs to call wiphy_resume() for it. However, brcmfmac already does a kfree() for the struct cfg80211_registered_device::ops field. Change the checks in wiphy_resume() to only access the struct cfg80211_registered_device::ops if the wiphy instance is still registered at this time. Cc: stable@vger.kernel.org # 4.10.x, 4.9.x Reported-by: Daniel J Blueman <daniel@quora.org> Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by: Franky Lin <franky.lin@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-03-17cfg80211: preserve wdev ID across netns changesJohannes Berg
When a wdev changes network namespace, its wdev ID will get reassigned since NETDEV_REGISTER is called again, in the new network namespace. Avoid that by checking if it was already assigned before, and document why we do that. Reported-and-tested-by: Arend Van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-03-16nl80211: Use signed function for a signed variableMasashi Honma
The rssi_threshold is defined as s32. Signed-off-by: Masashi Honma <masashi.honma@gmail.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-03-16nl80211: fix dumpit error path RTNL deadlocksJohannes Berg
Sowmini pointed out Dmitry's RTNL deadlock report to me, and it turns out to be perfectly accurate - there are various error paths that miss unlock of the RTNL. To fix those, change the locking a bit to not be conditional in all those nl80211_prepare_*_dump() functions, but make those require the RTNL to start with, and fix the buggy error paths. This also let me use sparse (by appropriately overriding the rtnl_lock/rtnl_unlock functions) to validate the changes. Cc: stable@vger.kernel.org Reported-by: Sowmini Varadhan <sowmini.varadhan@oracle.com> Reported-by: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-03-06cfg80211: Share Channel DFS state across wiphys of same DFS domainVasanthakumar Thiagarajan
Sharing DFS channel state across multiple wiphys (radios) could be useful with multiple radios on the system. When one radio completes CAC and markes the channel available another radio can use this information and start beaconing without really doing CAC. Whenever there is a state change in dfs channel associated to a particular wiphy the the same state change is propagated to other wiphys having the same DFS reg domain configuration. Also when a new wiphy is created the dfs channel state of other existing wiphys of same DFS domain is copied. Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qti.qualcomm.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-03-06cfg80211: Disallow moving out of operating DFS channel in non-ETSIVasanthakumar Thiagarajan
For non-ETSI regulatory domain, CAC result on DFS channel may not be valid once moving out of that channel (as done during remain-on-channel, scannning and off-channel tx). Running CAC on an operating DFS channel after every off-channel operation will only add complexity and disturb the current link. Better do not allow any off-channel switch from a DFS operating channel in non-ETSI domain. Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qti.qualcomm.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-03-06cfg80211: Make pre-CAC results valid only for ETSI domainVasanthakumar Thiagarajan
DFS requirement for ETSI domain (section 4.7.1.4 in ETSI EN 301 893 V1.8.1) is the only one which explicitly states that once DFS channel is marked as available afer the CAC, this channel will remain in available state even moving to a different operating channel. But the same is not explicitly stated in FCC DFS requirement. Also, Pre-CAC requriements are not explicitly mentioned in FCC requirement. Current implementation in keeping DFS channel in available state is same as described in ETSI domain. For non-ETSI DFS domain, this patch gives a grace period of 2 seconds since the completion of successful CAC before moving the channel's DFS state to 'usable' from 'available' state. The same grace period is checked against the channel's dfs_state_entered timestamp while deciding if a DFS channel is available for operation. There is a new radar event, NL80211_RADAR_PRE_CAC_EXPIRED, reported when DFS channel is moved from available to usable state after the grace period. Also make sure the DFS channel state is reset to usable once the beaconing operation on that channel is brought down (like stop_ap, leave_ibss and leave_mesh) in non-ETSI domain. Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qti.qualcomm.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-03-06cfg80211: refactor cfg80211_calculate_bitrate()Johannes Berg
This function contains the HT calculations, which makes no sense - split that out into a separate function. As a side effect, this makes the 60G flag independent from HT_MCS so remove the MCS one from wil6210 (also deleting a duplicate assignment.) Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-03-06cfg80211: combine two nested ifs into a single conditionJohannes Berg
Combine two instances of having two nested if statements into a single one with a combined condition to reduce the indentation. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-03-06cfg80211: Accept multiple RSSI thresholds for CQMAndrew Zaborowski
Change the SET CQM command's RSSI threshold attribute to accept any number of thresholds as a sorted array. The API should be backwards compatible so that if one s32 threshold value is passed, the old mechanism is enabled. The netlink event generated is the same in both cases. cfg80211 handles an arbitrary number of RSSI thresholds but drivers have to provide a method (set_cqm_rssi_range_config) that configures a range set by a high and a low value. Drivers have to call back when the RSSI goes out of that range and there's no additional event for each time the range is reconfigured as there was with the current one-threshold API. This method doesn't have a hysteresis parameter because there's no benefit to the cfg80211 code from having the hysteresis be handled by hardware/driver in terms of the number of wakeups. At the same time it would likely be less consistent between drivers if offloaded or done in the drivers. Signed-off-by: Andrew Zaborowski <andrew.zaborowski@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-02-10Merge tag 'mac80211-next-for-davem-2017-02-09' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next Johannes Berg says: ==================== Some more updates: * use shash in mac80211 crypto code where applicable * some documentation fixes * pass RSSI levels up in change notifications * remove unused rfkill-regulator * various other cleanups ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-09cfg80211: fix NAN bands definitionLuca Coelho
The nl80211_nan_dual_band_conf enumeration doesn't make much sense. The default value is assigned to a bit, which makes it weird if the default bit and other bits are set at the same time. To improve this, get rid of NL80211_NAN_BAND_DEFAULT and add a wiphy configuration to let the drivers define which bands are supported. This is exposed to the userspace, which then can make a decision on which band(s) to use. Additionally, rename all "dual_band" elements to "bands", to make things clearer. Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-02-08cfg80211: Pass new RSSI level in CQM RSSI notificationAndrzej Zaborowski
Update the drivers to pass the RSSI level as a cfg80211_cqm_rssi_notify parameter and pass this value to userspace in a new nl80211 attribute. This helps both userspace and also helps in the implementation of the multiple RSSI thresholds CQM mechanism. Note for marvell/mwifiex I pass 0 for the RSSI value because the new RSSI value is not available to the driver at the time of the cfg80211_cqm_rssi_notify call, but the driver queries the new value immediately after that, so it is actually available just a moment later if we wanted to defer caling cfg80211_cqm_rssi_notify until that moment. Without this, the new cfg80211 code (patch 3) will call .get_station which will send a duplicate HostCmd_CMD_RSSI_INFO command to the hardware. Signed-off-by: Andrew Zaborowski <andrew.zaborowski@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-02-08nl80211: fix validation of scheduled scan info for wowlan netdetectArend Van Spriel
For wowlan netdetect a separate limit is defined for the number of matchsets. Currently, this limit is ignored and the regular limit for scheduled scan matchsets, ie. struct wiphy::max_match_sets, is used for the net-detect case as well. Cc: Johannes Berg <johannes@sipsolutions.net> Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by: Franky Lin <franky.lin@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-02-08nl80211: add HT/VHT capabilities to AP parametersJohannes Berg
For the benefit of drivers that rebuild IEs in firmware, parse the IEs for HT/VHT capabilities and the respective membership selector in the (extended) supported rates. This avoids duplicating the same code into all drivers that need this information. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-02-08cfg80211: make rdev assignment clearer in nl80211_testmode_dump()Luca Coelho
Avoid assigning rdev to NULL when we already have it and getting it again from the wiphy index, by moving this code to relevant if block. Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-02-08cfg80211 debugfs: Cleanup some checkpatch issuesPichugin Dmitry
This fixes the checkpatch.pl warnings: * Macros should not use a trailing semicolon. * Spaces required around that '='. * Symbolic permissions 'S_IRUGO' are not preferred. Signed-off-by: Dmitriy Pichugin <smokeman85@gmail.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-02-07Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
The conflict was an interaction between a bug fix in the netvsc driver in 'net' and an optimization of the RX path in 'net-next'. Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-06nl80211: Fix mesh HT operation checkMasashi Honma
A previous change to fix checks for NL80211_MESHCONF_HT_OPMODE missed setting the flag when replacing FILL_IN_MESH_PARAM_IF_SET with checking codes. This results in dropping the received HT operation value when called by nl80211_update_mesh_config(). Fix this by setting the flag properly. Fixes: 9757235f451c ("nl80211: correct checks for NL80211_MESHCONF_HT_OPMODE value") Signed-off-by: Masashi Honma <masashi.honma@gmail.com> [rewrite commit message to use Fixes: line] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-01-27net: adjust skb->truesize in pskb_expand_head()Eric Dumazet
Slava Shwartsman reported a warning in skb_try_coalesce(), when we detect skb->truesize is completely wrong. In his case, issue came from IPv6 reassembly coping with malicious datagrams, that forced various pskb_may_pull() to reallocate a bigger skb->head than the one allocated by NIC driver before entering GRO layer. Current code does not change skb->truesize, leaving this burden to callers if they care enough. Blindly changing skb->truesize in pskb_expand_head() is not easy, as some producers might track skb->truesize, for example in xmit path for back pressure feedback (sk->sk_wmem_alloc) We can detect the cases where it should be safe to change skb->truesize : 1) skb is not attached to a socket. 2) If it is attached to a socket, destructor is sock_edemux() My audit gave only two callers doing their own skb->truesize manipulation. I had to remove skb parameter in sock_edemux macro when CONFIG_INET is not set to avoid a compile error. Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Slava Shwartsman <slavash@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-17Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
2017-01-14Merge tag 'mac80211-next-for-davem-2017-01-13' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next Johannes Berg says: ==================== For 4.11, we seem to have more than in the past few releases: * socket owner support for connections, so when the wifi manager (e.g. wpa_supplicant) is killed, connections are torn down - wpa_supplicant is critical to managing certain operations, and can opt in to this where applicable * minstrel & minstrel_ht updates to be more efficient (time and space) * set wifi_acked/wifi_acked_valid for skb->destructor use in the kernel, which was already available to userspace * don't indicate new mesh peers that might be used if there's no room to add them * multicast-to-unicast support in mac80211, for better medium usage (since unicast frames can use *much* higher rates, by ~3 orders of magnitude) * add API to read channel (frequency) limitations from DT * add infrastructure to allow randomizing public action frames for MAC address privacy (still requires driver support) * many cleanups and small improvements/fixes across the board ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-13cfg80211: Specify the reason for connect timeoutPurushottam Kushwaha
This enhances the connect timeout API to also carry the reason for the timeout. These reason codes for the connect time out are represented by enum nl80211_timeout_reason and are passed to user space through a new attribute NL80211_ATTR_TIMEOUT_REASON (u32). Signed-off-by: Purushottam Kushwaha <pkushwah@qti.qualcomm.com> Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> [keep gfp_t argument last] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-01-13cfg80211: Add support to sched scan to report better BSSsvamsi krishna
Enhance sched scan to support option of finding a better BSS while in connected state. Firmware scans the medium and reports when it finds a known BSS which has better RSSI than the current connected BSS. New attributes to specify the relative RSSI (compared to the current BSS) are added to the sched scan to implement this. Signed-off-by: vamsi krishna <vamsin@qti.qualcomm.com> Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-01-13cfg80211: Add support for randomizing TA of Public Action framesvamsi krishna
Add support to use a random local address (Address 2 = TA in transmit and the same address in receive functionality) for Public Action frames in order to improve privacy of WLAN clients. Applications fill the random transmit address in the frame buffer in the NL80211_CMD_FRAME command. This can be used only with the drivers that indicate support for random local address by setting the new NL80211_EXT_FEATURE_MGMT_TX_RANDOM_TA and/or NL80211_EXT_FEATURE_MGMT_TX_RANDOM_TA_CONNECTED in ext_features. The driver needs to configure receive behavior to accept frames to the specified random address during the time the frame exchange is pending and such frames need to be acknowledged similarly to frames sent to the local permanent address when this random address functionality is not used. Signed-off-by: vamsi krishna <vamsin@qti.qualcomm.com> Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-01-13wext: uninline stream addition functionsJohannes Berg
With 78, 111 and 85 bytes respectively (on x86-64), the functions iwe_stream_add_event(), iwe_stream_add_point() and iwe_stream_add_value() really shouldn't be inlines. It appears that at least my compiler already decided the same, and created a single instance of each one of them for each file using it, but that's still a number of instances in the system overall, which this reduces. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-01-11cfg80211: consider VHT opmode on station updateBeni Lev
Currently, this attribute is only fetched on station addition, but not on station change. Since this info is only present in the assoc request, with full station state support in the driver it cannot be present when the station is added. Thus, add support for changing the VHT opmode on station update if done before (or while) the station is marked as associated. After this, ignore it, since it used to be ignored. Signed-off-by: Beni Lev <beni.lev@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-03 16:41:37 +0000