summaryrefslogtreecommitdiff
path: root/net/wireless/scan.c
AgeCommit message (Collapse)Author
2021-01-26cfg80211: avoid holding the RTNL when calling the driverJohannes Berg
Currently, _everything_ in cfg80211 holds the RTNL, and if you have a slow USB device (or a few) you can get some bad lock contention on that. Fix that by re-adding a mutex to each wiphy/rdev as we had at some point, so we have locking for the wireless_dev lists and all the other things in there, and also so that drivers still don't have to worry too much about it (they still won't get parallel calls for a single device). Then, we can restrict the RTNL to a few cases where we add or remove interfaces and really need the added protection. Some of the global list management still also uses the RTNL, since we need to have it anyway for netdev management, but we only hold the RTNL for very short periods of time here. Link: https://lore.kernel.org/r/20210122161942.81df9f5e047a.I4a8e1a60b18863ea8c5e6d3a0faeafb2d45b2f40@changeid Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> [marvell driver issues] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-12-11cfg80211: Update TSF and TSF BSSID for multi BSSIlan Peer
When a new BSS entry is created based on multi BSS IE, the TSF and the TSF BSSID were not updated. Fix it. Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20201129172929.8377d5063827.I6f2011b6017c2ad507c61a3f1ca03b7177a46e32@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-12-11cfg80211: scan PSC channels in case of scan with wildcard SSIDAyala Beker
In case of scan request with wildcard SSID, or in case of more than one SSID in scan request, need to scan PSC channels even though all the co-located APs found during the legacy bands scan indicated that all the APs in their ESS are co-located, as we might find different networks on the PSC channels. Signed-off-by: Ayala Beker <ayala.beker@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20201129172929.736415a9ca5d.If5b3578ae85e11a707a5da07e66ba85928ba702c@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-11-06nl80211/cfg80211: fix potential infinite loopColin Ian King
The for-loop iterates with a u8 loop counter and compares this with the loop upper limit of request->n_ssids which is an int type. There is a potential infinite loop if n_ssids is larger than the u8 loop counter, so fix this by making the loop counter an int. Addresses-Coverity: ("Infinite loop") Fixes: c8cb5b854b40 ("nl80211/cfg80211: support 6 GHz scanning") Signed-off-by: Colin Ian King <colin.king@canonical.com> Link: https://lore.kernel.org/r/20201029222407.390218-1-colin.king@canonical.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-09-28cfg80211: parse S1G Operation element for BSS channelThomas Pedersen
Extract the BSS primary channel from the S1G Operation element. Signed-off-by: Thomas Pedersen <thomas@adapt-ip.com> Link: https://lore.kernel.org/r/20200922022818.15855-7-thomas@adapt-ip.com [remove the goto bits] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-09-28cfg80211: convert S1G beacon to scan resultsThomas Pedersen
The S1G beacon is an extension frame as opposed to management frame for the regular beacon. This means we may have to occasionally cast the frame buffer to a different header type. Luckily this isn't too bad as scan results mostly only care about the IEs. Signed-off-by: Thomas Pedersen <thomas@adapt-ip.com> Link: https://lore.kernel.org/r/20200922022818.15855-6-thomas@adapt-ip.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-09-28nl80211/cfg80211: support 6 GHz scanningTova Mussai
Support 6 GHz scanning, by * a new scan flag to scan for colocated BSSes advertised by (and found) APs on 2.4 & 5 GHz * doing the necessary reduced neighbor report parsing for this, to find them * adding the ability to split the scan request in case the device by itself cannot support this. Also add some necessary bits in mac80211 to not break with these changes. Signed-off-by: Tova Mussai <tova.mussai@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Link: https://lore.kernel.org/r/20200918113313.232917c93af9.Ida22f0212f9122f47094d81659e879a50434a6a2@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-08-27net: wireless: Convert to use the preferred fallthrough macroMiaohe Lin
Convert the uses of fallthrough comments to fallthrough macro. Signed-off-by: Miaohe Lin <linmiaohe@huawei.com> Link: https://lore.kernel.org/r/20200822082323.45495-1-linmiaohe@huawei.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-08-27net: wireless: scan.c: delete or fix duplicated wordsRandy Dunlap
Drop repeated word "stored". Change "is is" to "it is". Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Johannes Berg <johannes.berg@intel.com> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: linux-wireless@vger.kernel.org Link: https://lore.kernel.org/r/20200822231953.465-6-rdunlap@infradead.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-07-31cfg80211: allow the low level driver to flush the BSS tableEmmanuel Grumbach
The low level driver adds its own opaque information in the BSS table in the cfg80211_bss structure. The low level driver may need to signal that this information is no longer relevant and needs to be recreated. Add an API to allow the low level driver to do that. iwlwifi needs this because it keeps there an information about the firmware's internal clock. This is kept in mac80211's struct ieee80211_bss::sync_device_ts. This information is populated while we scan, we add the internal firmware's clock to each beacon which allows us to program the firmware correctly after association so that it'll know when (in terms of its internal clock) the DTIM and TBTT will happen. When the firmware is reset this internal clock is reset as well and ieee80211_bss::sync_device_ts is no longer accurate. iwlwifi will call this new API any time the firmware is started. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Link: https://lore.kernel.org/r/20200625111524.3992-1-emmanuel.grumbach@intel.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-04-24cfg80211: express channels with a KHz componentThomas Pedersen
Some bands (S1G) define channels centered on a non-integer MHz. Give ieee80211_channel and cfg80211_chan_def a freq_offset component where the final frequency can be expressed as: MHZ_TO_KHZ(chan->center_freq) + chan->freq_offset; Also provide some helper functions to do the frequency conversion and test for equality. Retain the existing interface to frequency and channel conversion helpers, and expose new ones which handle frequencies in units of KHz. Some internal functions (net/wireless/chan.c) pass around a frequency value. Convert these to units of KHz. mesh, ibss, wext, etc. are currently ignored. Signed-off-by: Thomas Pedersen <thomas@adapt-ip.com> Link: https://lore.kernel.org/r/20200402011810.22947-3-thomas@adapt-ip.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-03-29Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Minor comment conflict in mac80211. Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-26cfg80211: Do not warn on same channel at the end of CSAIlan Peer
When cfg80211_update_assoc_bss_entry() is called, there is a verification that the BSS channel actually changed. As some APs use CSA also for bandwidth changes, this would result with a kernel warning. Fix this by removing the WARN_ON(). Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20200326150855.96316ada0e8d.I6710376b1b4257e5f4712fc7ab16e2b638d512aa@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-02-21cfg80211: remove support for adjacent channel compensationEmmanuel Grumbach
The only driver that used that was iwlwifi and it removed support for this. Remove the feature here as well. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Link: https://lore.kernel.org/r/20200214232336.a530de38e511.I393bc395f6037c8cca6421ed550e3072dc248aed@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-02-21cfg80211: Pass lockdep expression to RCU listsAmol Grover
rdev->sched_scan_req_list maybe traversed using list_for_each_entry_rcu outside an RCU read-side critical section but under the protection of rtnl_mutex. Hence, add corresponding lockdep expression to silence false-positive warnings, and harden RCU lists. Signed-off-by: Amol Grover <frextrite@gmail.com> Link: https://lore.kernel.org/r/20200219091102.10709-1-frextrite@gmail.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-10-07cfg80211: fix a bunch of RCU issues in multi-bssid codeSara Sharon
cfg80211_update_notlisted_nontrans() leaves the RCU critical session too early, while still using nontrans_ssid which is RCU protected. In addition, it performs a bunch of RCU pointer update operations such as rcu_access_pointer and rcu_assign_pointer. The caller, cfg80211_inform_bss_frame_data(), also accesses the RCU pointer without holding the lock. Just wrap all of this with bss_lock. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/20191004123706.15768-3-luca@coelho.fi Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-10-01cfg80211: validate SSID/MBSSID element ordering assumptionJohannes Berg
The code copying the data assumes that the SSID element is before the MBSSID element, but since the data is untrusted from the AP, this cannot be guaranteed. Validate that this is indeed the case and ignore the MBSSID otherwise, to avoid having to deal with both cases for the copy of data that should be between them. Cc: stable@vger.kernel.org Fixes: 0b8fb8235be8 ("cfg80211: Parsing of Multiple BSSID information in scanning") Link: https://lore.kernel.org/r/1569009255-I1673911f5eae02964e21bdc11b2bf58e5e207e59@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-07-29cfg80211: fix duplicated scan entries after channel switchSergey Matyukevich
When associated BSS completes channel switch procedure, its channel record needs to be updated. The existing mac80211 solution was extended to cfg80211 in commit 5dc8cdce1d72 ("mac80211/cfg80211: update bss channel on channel switch"). However that solution still appears to be incomplete as it may lead to duplicated scan entries for associated BSS after channel switch. The root cause of the problem is as follows. Each BSS entry is included into the following data structures: - bss list rdev->bss_list - bss search tree rdev->bss_tree Updating BSS channel record without rebuilding bss_tree may break tree search since cmp_bss considers all of the following: channel, bssid, ssid. When BSS channel is updated, but its location in bss_tree is not updated, then subsequent search operations may fail to locate this BSS since they will be traversing bss_tree in wrong direction. As a result, for scan performed after associated BSS channel switch, cfg80211_bss_update may add the second entry for the same BSS to both bss_list and bss_tree, rather then update the existing one. To summarize, if BSS channel needs to be updated, then bss_tree should be rebuilt in order to put updated BSS entry into a proper location. This commit suggests the following straightforward solution: - if new entry has been already created for BSS after channel switch, then use its IEs to update known BSS entry and then remove new entry completely - use rb_erase/rb_insert_bss reinstall updated BSS in bss_tree - for nontransmit BSS entry, the whole transmit BSS hierarchy is updated Signed-off-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com> Link: https://lore.kernel.org/r/20190726163922.27509-3-sergey.matyukevich.os@quantenna.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-07-29cfg80211: refactor cfg80211_bss_updateSergey Matyukevich
This patch implements minor refactoring for cfg80211_bss_update function. Code path for updating known BSS is extracted into dedicated cfg80211_update_known_bss function. Signed-off-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com> Link: https://lore.kernel.org/r/20190726163922.27509-2-sergey.matyukevich.os@quantenna.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-07-26cfg80211: give all multi-BSSID BSS entries the same timestampJohannes Berg
If we just read jiffies over and over again, a non-transmitting entry may have a newer timestamp than the transmitting one, leading to possible confusion on expiry. Give them all the same timestamp when creating them. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com> Link: https://lore.kernel.org/r/20190703133823.10530-3-johannes@sipsolutions.net Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-07-26cfg80211: don't parse MBSSID if transmitting BSS isn't createdJohannes Berg
Don't parse the multi-BSSID structures if we couldn't even create their transmitting BSS, this would confuse all of our tracking. This also means that non_tx_data->tx_bss will never be NULL, so we can clean up a little bit. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com> Link: https://lore.kernel.org/r/20190703133823.10530-2-johannes@sipsolutions.net Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-07-26cfg80211: clean up cfg80211_inform_single_bss_frame_data()Johannes Berg
cfg80211_inform_single_bss_frame_data() doesn't need the non_tx_data data argument since it's always NULL. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com> Link: https://lore.kernel.org/r/20190703133823.10530-1-johannes@sipsolutions.net Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-06-17Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Honestly all the conflicts were simple overlapping changes, nothing really interesting to report. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-14cfg80211: use BIT_ULL in cfg80211_parse_mbssid_data()Luca Coelho
The seen_indices variable is u64 and in other parts of the code we assume mbssid_index_ie[2] can be up to 45, so we should use the 64-bit versions of BIT, namely, BIT_ULL(). Reported-by: Dan Carpented <dan.carpenter@oracle.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-06-14cfg80211: Add a function to iterate all BSS entriesIlan Peer
Add a function that iterates over the BSS entries associated with a given wiphy and calls a callback for each iterated BSS. This can be used by drivers in various ways, e.g., to evaluate some property for all the BSSs in the medium. Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-05-28cfg80211: Handle bss expiry during connectionChaitanya Tata
If the BSS is expired during connection, the connect result will trigger a kernel warning. Ideally cfg80211 should hold the BSS before the connection is attempted, but as the BSSID is not known in case of auth/assoc MLME offload (connect op) it doesn't. For those drivers without the connect op cfg80211 holds down the reference so it wil not be removed from list. Fix this by removing the warning and silently adding the BSS back to the bss list which is return by the driver (with proper BSSID set) or in case the BSS is already added use that. The requirements for drivers are documented in the API's. Signed-off-by: Chaitanya Tata <chaitanya.tata@bluwireless.co.uk> [formatting fixes, keep old timestamp] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-04-26Merge tag 'mac80211-next-for-davem-2019-04-26' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next Johannes Berg says: ==================== Various updates, notably: * extended key ID support (from 802.11-2016) * per-STA TX power control support * mac80211 TX performance improvements * HE (802.11ax) updates * mesh link probing support * enhancements of multi-BSSID support (also related to HE) * OWE userspace processing support ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-26cfg80211: don't pass pointer to pointer unnecessarilyDan Carpenter
The cfg80211_merge_profile() and ieee802_11_find_bssid_profile() are a bit cleaner if we just pass the merged_ie pointer instead of a pointer to the pointer. This isn't a functional change, it's just a clean up. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-04-26cfg80211: support profile split between elementsSara Sharon
Since an element is limited to 255 octets, a profile may be split split to several elements. Support the split as defined in the 11ax draft 3. Detect legacy split and print a net-rate limited warning, since there is no ROI in supporting this probably non-existent split. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-04-26cfg80211: support non-inheritance elementSara Sharon
Subelement profile may specify element IDs it doesn't inherit from the management frame. Support it. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-04-26cfg80211: don't skip multi-bssid index elementSara Sharon
When creating the IEs for the nontransmitted BSS, the index element is skipped. However, we need to get DTIM values from it, so don't skip it. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-03-29cfg80211: Use kmemdup in cfg80211_gen_new_ie()YueHaibing
Use kmemdup rather than duplicating its implementation Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-02-08cfg80211: fix memory leak of new_ieSara Sharon
new_ie is used as a temporary storage for the generation of the new elements. However, after copying from it the memory wasn't freed and leaked. Free it. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-02-08cfg80211: fix the IE inheritance of extension IEsSara Sharon
Extension IEs have ID 255 followed by extension ID. Current code is buggy in handling it in two ways: 1. When checking if IE is in the frame, it uses just the ID, which for extension elements is too broad. 2. It uses 0xFF to mark copied IEs, which will result in not copying extension IEs from the subelement. Fix both issue. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-02-08cfg80211: save multi-bssid propertiesSara Sharon
When the new IEs are generated, the multiple BSSID elements are not saved. Save aside properties that are needed later for PS. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-02-08cfg80211: make BSSID generation function inlineSara Sharon
This will enable reuse by mac80211. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-02-08cfg80211: parse multi-bssid only if HW supports itSara Sharon
Parsing and exposing nontransmitted APs is problematic when underlying HW doesn't support it. Do it only if driver indicated support. Allow HE restriction as well, since the HE spec defined the exact manner that Multiple BSSID set should behave. APs that not support the HE spec will have less predictable Multiple BSSID set support/behavior Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-02-08cfg80211: Move Multiple BSS info to struct cfg80211_bss to be visibleSara Sharon
Previously the transmitted BSS and the non-trasmitted BSS list were defined in struct cfg80211_internal_bss. Move them to struct cfg80211_bss since mac80211 needs this info. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-02-08cfg80211: Properly track transmitting and non-transmitting BSSSara Sharon
When holding data of the non-transmitting BSS, we need to keep the transmitting BSS data on. Otherwise it will be released, and release the non-transmitting BSS with it. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-02-08cfg80211: use for_each_element() for multi-bssid parsingJohannes Berg
Use the new for_each_element() helper here, we cannot use for_each_subelement() since we have a fixed 1 byte before the subelements start. While at it, also fix le16_to_cpup() to be get_unaligned_le16() since we don't know anything about alignment. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-02-08cfg80211: Parsing of Multiple BSSID information in scanningPeng Xu
This extends cfg80211 BSS table processing to be able to parse Multiple BSSID element from Beacon and Probe Response frames and to update the BSS profiles in internal database for non-transmitted BSSs. Signed-off-by: Peng Xu <pxu@codeaurora.org> Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Jouni Malinen <jouni@codeaurora.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-02-08cfg80211: add various struct element finding helpersJohannes Berg
We currently have a number of helpers to find elements that just return a u8 *, change those to return a struct element and add inlines to deal with the u8 * compatibility. Note that the match behaviour is changed to start the natch at the data, so conversion from _ie_match to _elem_match need to be done carefully. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-02-08cfg80211: add and use strongly typed element iteration macrosJohannes Berg
Rather than always iterating elements from frames with pure u8 pointers, add a type "struct element" that encapsulates the id/datalen/data format of them. Then, add the element iteration macros * for_each_element * for_each_element_id * for_each_element_extid which take, as their first 'argument', such a structure and iterate through a given u8 array interpreting it as elements. While at it and since we'll need it, also add * for_each_subelement * for_each_subelement_id * for_each_subelement_extid which instead of taking data/length just take an outer element and use its data/datalen. Also add for_each_element_completed() to determine if any of the loops above completed, i.e. it was able to parse all of the elements successfully and no data remained. Use for_each_element_id() in cfg80211_find_ie_match() as the first user of this. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-12-18cfg80211: add some missing fall through annotationsLuca Coelho
There are talks about enabling -Wimplicit-fallthrough warnings in the mainline and it is already enabled in linux-next. Add all the missing annotations to prevent warnings when this happens. And in one case, remove the extra text from the annotation so that the compiler recognizes it. Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-09-10cfg80211: Address some corner cases in scan result channel updatingJouni Malinen
cfg80211_get_bss_channel() is used to update the RX channel based on the available frame payload information (channel number from DSSS Parameter Set element or HT Operation element). This is needed on 2.4 GHz channels where frames may be received on neighboring channels due to overlapping frequency range. This might of some use on the 5 GHz band in some corner cases, but things are more complex there since there is no n:1 or 1:n mapping between channel numbers and frequencies due to multiple different starting frequencies in different operating classes. This could result in ieee80211_channel_to_frequency() returning incorrect frequency and ieee80211_get_channel() returning incorrect channel information (or indication of no match). In the previous implementation, this could result in some scan results being dropped completely, e.g., for the 4.9 GHz channels. That prevented connection to such BSSs. Fix this by using the driver-provided channel pointer if ieee80211_get_channel() does not find matching channel data for the channel number in the frame payload and if the scan is done with 5 MHz or 10 MHz channel bandwidth. While doing this, also add comments describing what the function is trying to achieve to make it easier to understand what happens here and why. Signed-off-by: Jouni Malinen <jouni@codeaurora.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-12-19cfg80211: Scan results to also report the per chain signal strengthSunil Dutt
This commit enhances the scan results to report the per chain signal strength based on the latest BSS update. This provides similar information to what is already available through STA information. Signed-off-by: Sunil Dutt <usdutt@qti.qualcomm.com> Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-05-23cfg80211: make cfg80211_sched_scan_results() work from atomic contextArend Van Spriel
Drivers should be able to call cfg80211_sched_scan_results() from atomic context. However, with the introduction of multiple scheduled scan feature this requirement was not taken into account resulting in regression shown below. [ 119.021594] BUG: scheduling while atomic: irq/47-iwlwifi/517/0x00000200 [ 119.021604] Modules linked in: [...] [ 119.021759] CPU: 1 PID: 517 Comm: irq/47-iwlwifi Not tainted 4.12.0-rc2-t440s-20170522+ #1 [ 119.021763] Hardware name: LENOVO 20AQS03H00/20AQS03H00, BIOS GJET91WW (2.41 ) 09/21/2016 [ 119.021766] Call Trace: [ 119.021778] ? dump_stack+0x5c/0x84 [ 119.021784] ? __schedule_bug+0x4c/0x70 [ 119.021792] ? __schedule+0x496/0x5c0 [ 119.021798] ? schedule+0x2d/0x80 [ 119.021804] ? schedule_preempt_disabled+0x5/0x10 [ 119.021810] ? __mutex_lock.isra.0+0x18e/0x4c0 [ 119.021817] ? __wake_up+0x2f/0x50 [ 119.021833] ? cfg80211_sched_scan_results+0x19/0x60 [cfg80211] [ 119.021844] ? cfg80211_sched_scan_results+0x19/0x60 [cfg80211] [ 119.021859] ? iwl_mvm_rx_lmac_scan_iter_complete_notif+0x17/0x30 [iwlmvm] [ 119.021869] ? iwl_pcie_rx_handle+0x2a9/0x7e0 [iwlwifi] [ 119.021878] ? iwl_pcie_irq_handler+0x17c/0x730 [iwlwifi] [ 119.021884] ? irq_forced_thread_fn+0x60/0x60 [ 119.021887] ? irq_thread_fn+0x16/0x40 [ 119.021892] ? irq_thread+0x109/0x180 [ 119.021896] ? wake_threads_waitq+0x30/0x30 [ 119.021901] ? kthread+0xf2/0x130 [ 119.021905] ? irq_thread_dtor+0x90/0x90 [ 119.021910] ? kthread_create_on_node+0x40/0x40 [ 119.021915] ? ret_from_fork+0x26/0x40 Fixes: b34939b98369 ("cfg80211: add request id to cfg80211_sched_scan_*() api") Reported-by: Sander Eikelenboom <linux@eikelenboom.it> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-04-28cfg80211: add request id to cfg80211_sched_scan_*() apiArend Van Spriel
Have proper request id filled in the SCHED_SCAN_RESULTS and SCHED_SCAN_STOPPED notifications toward user-space by having the driver provide it through the api. Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by: Franky Lin <franky.lin@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-04-26cfg80211: add request id parameter to .sched_scan_stop() signatureArend Van Spriel
For multiple scheduled scan support the driver needs to know which scheduled scan request is being stopped. Pass the request id in the .sched_scan_stop() callback. Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by: Franky Lin <franky.lin@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-24 20:09:54 +0000