summaryrefslogtreecommitdiff
path: root/net/wireless/core.c
AgeCommit message (Collapse)Author
2014-12-17cfg80211: allow wiphy specific regdomain managementJonathan Doron
Add a new regulatory flag that allows a driver to manage regdomain changes/updates for its own wiphy. A self-managed wiphys only employs regulatory information obtained from the FW and driver and does not use other cfg80211 sources like beacon-hints, country-code IEs and hints from other devices on the same system. Conversely, a self-managed wiphy does not share its regulatory hints with other devices in the system. If a system contains several devices, one or more of which are self-managed, there might be contradictory regulatory settings between them. Usage of flag is generally discouraged. Only use it if the FW/driver is incompatible with non-locally originated hints. A new API lets the driver send a complete regdomain, to be applied on its wiphy only. After a wiphy-specific regdomain change takes place, usermode will get a new type of change notification. The regulatory core also takes care enforce regulatory restrictions, in case some interfaces are on forbidden channels. Signed-off-by: Jonathan Doron <jonathanx.doron@intel.com> Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com> Reviewed-by: Luis R. Rodriguez <mcgrof@suse.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-12-12wireless: Support of IFLA_INFO_KIND rtnl attributeVadim Kochan
It allows to identify the wlan kind of device for the user application, e.g.: # ip -d link 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT group default link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 promiscuity 0 2: enp0s25: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast state DOWN mode DEFAULT group default qlen 1000 link/ether XX:XX:XX:XX:XX:XX brd ff:ff:ff:ff:ff:ff promiscuity 0 3: wlp3s0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP mode DEFAULT group default qlen 1000 link/ether XX:XX:XX:XX:XX:XX brd ff:ff:ff:ff:ff:ff promiscuity 0 wlan Signed-off-by: Vadim Kochan <vadim4j@gmail.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> [make wireless_link_ops const] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-11-28cfg80211: leave invalid channels on regdomain changeArik Nemtsov
When the regulatory settings change, some channels might become invalid. Disconnect interfaces acting on these channels, after giving userspace code a grace period to leave them. This mode is currently opt-in, and not all interface operating modes are supported for regulatory-enforcement checks. A wiphy that wishes to use the new enforcement code must specify an appropriate regulatory flag, and all its supported interface modes must be supported by the checking code. Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com> Reviewed-by: Luis R. Rodriguez <mcgrof@suse.com> [fix some indentation, typos] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-11-19cfg80211: introduce TDLS channel switch commandsArik Nemtsov
Introduce commands to initiate and cancel TDLS channel-switching. Once TDLS channel-switching is started, the lower level driver is responsible for continually initiating channel-switch operations and returning to the base (AP) channel to listen for beacons from time to time. Upon cancellation of the channel-switch all communication between the relevant TDLS peers will continue on the base channel. Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-11-04cfg80211: 802.11p OCB mode handlingRostislav Lisovy
This patch adds new iface type (NL80211_IFTYPE_OCB) representing the OCB (Outside the Context of a BSS) mode. When establishing a connection to the network a cfg80211_join_ocb function is called (particular nl80211_command is added as well). A mandatory parameters during the ocb_join operation are 'center frequency' and 'channel width (5/10 MHz)'. Changes done in mac80211 are minimal possible required to avoid many warnings (warning: enumeration value 'NL80211_IFTYPE_OCB' not handled in switch) during compilation. Full functionality (where needed) is added in the following patch. Signed-off-by: Rostislav Lisovy <rostislav.lisovy@fel.cvut.cz> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-10-31cfg80211: avoid using default in interface type switchJohannes Berg
Most code avoids having a default case in interface type switch statements already, to make it easier to find places that need to be extended. Change the code in the __cfg80211_leave() and nl80211_key_allowed() functions to not have a default case. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-10-27cfg80211: support creating wiphy with suggested nameBen Greear
Kernel will attempt to use the name if it is supplied, but if name cannot be used for some reason, the default phyX name will be used instead. Signed-off-by: Ben Greear <greearb@candelatech.com> [while at it, use wiphy_name() instead of dev_name(), fix format string issue reported by Kees Cook] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-09-15Merge tag 'mac80211-next-for-john-2014-09-12' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next Johannes Berg <johannes@sipsolutions.net> says: "This time, I have some rate minstrel improvements, support for a very small feature from CCX that Steinar reverse-engineered, dynamic ACK timeout support, a number of changes for TDLS, early support for radio resource measurement and many fixes. Also, I'm changing a number of places to clear key memory when it's freed and Intel claims copyright for code they developed." Conflicts: net/mac80211/iface.c Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-11cfg80211: clear wext keys when freeing and removing themJohannes Berg
When freeing the keys stored for wireless extensions, clear the memory to avoid having the key material stick around in memory "forever". Similarly, when userspace overwrites a key, actually clear it instead of just setting the key length to zero. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-09-05cfg80211: add Intel Mobile Communications copyrightJohannes Berg
Our legal structure changed at some point (see wikipedia), but we forgot to immediately switch over to the new copyright notice. For files that we have modified in the time since the change, add the proper copyright notice now. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-09-04Merge tag 'mac80211-next-for-john-2014-08-29' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next Johannes Berg <johannes@sipsolutions.net> says: "Not that much content this time. Some RCU cleanups, crypto performance improvements, and various patches all over, rather than listing them one might as well look into the git log instead." Signed-off-by: John W. Linville <linville@tuxdriver.com> Conflicts: drivers/net/wireless/ath/wil6210/wmi.c
2014-08-26cfg80211: re-enable CSA for drivers that support itMichal Kazior
This reverts commit dda444d52496aa8ddc501561bca580f1374a96a9. Channel switching code has been reworked and improved significantly since the time original locking issues were found. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-08-25wireless: core: Reorder wiphy_register() notifications relevantlyTomasz Bursztyka
Currently it can send regulatory domain change notification before any NEW_WIPHY notification. Moreover, if rfill_register() fails, calling wiphy_unregister() will send a DEL_WIPHY though no NEW_WIPHY had been sent previously. Thus reordering so it properly notifies NEW_WIPHY before any other. Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-06-23cfg80211: make ethtool the driver's responsibilityJohannes Berg
Currently, cfg80211 tries to implement ethtool, but that doesn't really scale well, with all the different operations. Make the lower-level driver responsible for it, which currently only has an effect on mac80211. It will similarly not scale well at that level though, since mac80211 also has many drivers. To cleanly implement this in mac80211, introduce a new file and move some code to appropriate places. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-05-26cfg80211: send events when devices are added/removedJohannes Berg
We're currently sending NEW_WIPHY events for renames (which is a bit odd, but now can't be changed), but also send them for really new devices that register. Also send DEL_WIPHY events when a device is removed, the event ID for this was already reserved. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-05-15cfg80211: Support multiple CSA countersAndrei Otcheretianski
Change the type of NL80211_ATTR_CSA_C_OFF_BEACON and NL80211_ATTR_CSA_C_OFF_PRESP to be NLA_BINARY which allows userspace to use beacons and probe responses with multiple CSA counters. This isn't breaking the API since userspace can continue to use nla_put_u16 for this attributes, which is equivalent to a single element u16 array. In addition advertise max number of supported CSA counters. This is needed when using CSA and eCSA IEs together. Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com> Signed-off-by: Luciano Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-05-09mac80211: handle failed restart/resume betterJohannes Berg
When the driver fails during HW restart or resume, the whole stack goes into a very confused state with interfaces being up while the hardware is down etc. Address this by shutting down everything; we'll run into a lot of warnings in the process but that's better than having the whole stack get messed up. Reviewed-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-05-06cfg80211: export interface stopping functionMichal Kazior
This exports a new cfg80211_stop_iface() function. This is intended for driver internal interface combination management and channel switching. Due to locking issues (it re-enters driver) the call is asynchronous and uses cfg80211 event list/worker. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-04-29cfg80211: remove BUG_ON usageJohannes Berg
These really can't trigger unless somebody messes up the code, but don't make debugging it needlessly complicated, WARN and return instead of BUG_ON(). Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-04-25cfg80211: change return value of notifier functionZhao, Gang
Return NOTIFY_DONE if we don't care this time's notification, return NOTIFY_OK if we successfully handled this time's notification. That's the formal way to do it. Signed-off-by: Zhao, Gang <gamerh2o@gmail.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-04-25cfg80211: change wiphy_to_dev function nameZhao, Gang
Name wiphy_to_rdev is more accurate to describe what the function does, i.e., return a pointer pointing to struct cfg80211_registered_device. Signed-off-by: Zhao, Gang <gamerh2o@gmail.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-04-09cfg80211/mac80211: move more combination checks to mac80211Luciano Coelho
Get rid of the cfg80211_can_add_interface() and cfg80211_can_change_interface() functions by moving that functionality to mac80211. With this patch all interface combination checks are now out of cfg80211 (except for the channel switch case which will be addressed in a future commit). Additionally, modify the ieee80211_check_combinations() function so that an undefined chandef can be passed, in order to use it before a channel is defined. Signed-off-by: Luciano Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-04-09cfg80211: allow userspace to take ownership of interfacesJohannes Berg
When dynamically creating interfaces from userspace, e.g. for P2P usage, such interfaces are usually owned by the process that created them, i.e. wpa_supplicant. Should wpa_supplicant crash, such interfaces will often cease operating properly and cause problems on restarting the process. To avoid this problem, introduce an ownership concept for interfaces. If an interface is owned by a netlink socket, then it will be destroyed if the netlink socket is closed for any reason, including if the process it belongs to crashed. This gives us a race-free way to get rid of any such interfaces. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-03-21Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next into for-davem
2014-03-14Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts: drivers/net/usb/r8152.c drivers/net/xen-netback/netback.c Both the r8152 and netback conflicts were simple overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-03cfg80211: remove racy beacon_interval assignmentJohannes Berg
In case of AP mode, the beacon interval is already reset to zero inside cfg80211_stop_ap(), and in the other modes it isn't relevant. Remove the assignment to remove a potential race since the assignment isn't properly locked. Reported-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-02-25cfg80211: send stop AP event only due to internal reasonIlan Peer
Commit "nl80211: send event when AP operation is stopped" added an event to notify user space that an AP interface has been stopped, to handle cases such as suspend etc. The event is sent regardless if the stop AP flow was triggered by user space or due to internal state change. This might cause issues with wpa_supplicant/hostapd flows that consider stop AP flow as a synchronous one, e.g., AP/GO channel change in the absence of CSA support. In such cases, the flow will restart the AP immediately after the stop AP flow is done, and only handle the stop AP event after the current flow is done, and as a result stop the AP again. Change the current implementation to only send the event in case the stop AP was triggered due to an internal reason. Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-02-13Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless
2014-02-06cfg80211: send scan results from work queueJohannes Berg
Due to the previous commit, when a scan finishes, it is in theory possible to hit the following sequence: 1. interface starts being removed 2. scan is cancelled by driver and cfg80211 is notified 3. scan done work is scheduled 4. interface is removed completely, rdev->scan_req is freed, event sent to userspace but scan done work remains pending 5. new scan is requested on another virtual interface 6. scan done work runs, freeing the still-running scan To fix this situation, hang on to the scan done message and block new scans while that is the case, and only send the message from the work function, regardless of whether the scan_req is already freed from interface removal. This makes step 5 above impossible and changes step 6 to be 5. scan done work runs, sending the scan done message As this can't work for wext, so we send the message immediately, but this shouldn't be an issue since we still return -EBUSY. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-02-06cfg80211: fix scan done raceJohannes Berg
When an interface/wdev is removed, any ongoing scan should be cancelled by the driver. This will make it call cfg80211, which only queues a work struct. If interface/wdev removal is quick enough, this can leave the scan request pending and processed only after the interface is gone, causing a use-after-free. Fix this by making sure the scan request is not pending after the interface is destroyed. We can't flush or cancel the work item due to locking concerns, but when it'll run it shouldn't find anything to do. This leaves a potential issue, if a new scan gets requested before the work runs, it prematurely stops the running scan, potentially causing another crash. I'll fix that in the next patch. This was particularly observed with P2P_DEVICE wdevs, likely because freeing them is quicker than freeing netdevs. Reported-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com> Fixes: 4a58e7c38443 ("cfg80211: don't "leak" uncompleted scans") Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-02-06cfg80211: re-enable 5/10 MHz supportJohannes Berg
Unfortunately I forgot this during the merge window, but the patch seems small enough to go in as a fix. The userspace API bug that was the reason for disabling it has long been fixed. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-02-04cfg80211: make device_type constJohannes Berg
Instances of struct device_type are never modified, make them const. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-12-16Merge remote-tracking branch 'wireless-next/master' into mac80211-nextJohannes Berg
2013-12-06Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless Conflicts: drivers/net/wireless/brcm80211/Kconfig net/mac80211/util.c
2013-12-05cfg80211: don't "leak" uncompleted scansEliad Peller
___cfg80211_scan_done() can be called in some cases (e.g. on NETDEV_DOWN) before the low level driver notified scan completion (which is indicated by passing leak=true). Clearing rdev->scan_req in this case is buggy, as scan_done_wk might have already being queued/running (and can't be flushed as it takes rtnl()). If a new scan will be requested at this stage, the scan_done_wk will try freeing it (instead of the previous scan), and this will later result in a use after free. Simply remove the "leak" option, and replace it with a standard WARN_ON. An example backtrace after such crash: Unable to handle kernel paging request at virtual address fffffee5 pgd = c0004000 [fffffee5] *pgd=9fdf6821, *pte=00000000, *ppte=00000000 Internal error: Oops: 17 [#1] SMP ARM PC is at cfg80211_scan_done+0x28/0xc4 [cfg80211] LR is at __ieee80211_scan_completed+0xe4/0x2dc [mac80211] [<bf0077b0>] (cfg80211_scan_done+0x28/0xc4 [cfg80211]) [<bf0973d4>] (__ieee80211_scan_completed+0xe4/0x2dc [mac80211]) [<bf0982cc>] (ieee80211_scan_work+0x94/0x4f0 [mac80211]) [<c005fd10>] (process_one_work+0x1b0/0x4a8) [<c0060404>] (worker_thread+0x138/0x37c) [<c0066d70>] (kthread+0xa4/0xb0) Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-12-05cfg80211: stop sched scan only when neededBarak Bercovitz
cfg80211_leave stops sched scan when any station vif is leaving. Add an explicit check and call it only when the relevant vif (the one we scan on) is leaving. Signed-off-by: Barak Bercovitz <barak@wizery.com> [Eliad - changed the commit message a bit] Signed-off-by: Eliad Peller <eliad@wizery.com> [Johannes - add ASSERT_RTNL since that protects the pointer] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-12-02cfg80211: disable CSA for all driversSimon Wunderlich
The channel switch announcement code has some major locking problems which can cause a deadlock in worst case. A series of fixes has been proposed, but these are non-trivial and need to be tested first. Therefore disable CSA completely for 3.13. Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-11-25cfg80211: move regulatory flags to their own variableLuis R. Rodriguez
We'll expand this later, this will make it easier to classify and review what things are related to regulatory or not. Coccinelle only missed 4 hits, which I had to do manually, supplying the SmPL in case of merge conflicts. @@ struct wiphy *wiphy; @@ -wiphy->flags |= WIPHY_FLAG_CUSTOM_REGULATORY +wiphy->regulatory_flags |= REGULATORY_CUSTOM_REG @@ expression e; @@ -e->flags |= WIPHY_FLAG_CUSTOM_REGULATORY +e->regulatory_flags |= REGULATORY_CUSTOM_REG @@ struct wiphy *wiphy; @@ -wiphy->flags &= ~WIPHY_FLAG_CUSTOM_REGULATORY +wiphy->regulatory_flags &= ~REGULATORY_CUSTOM_REG @@ struct wiphy *wiphy; @@ -wiphy->flags & WIPHY_FLAG_CUSTOM_REGULATORY +wiphy->regulatory_flags & REGULATORY_CUSTOM_REG @@ struct wiphy *wiphy; @@ -wiphy->flags |= WIPHY_FLAG_STRICT_REGULATORY +wiphy->regulatory_flags |= REGULATORY_STRICT_REG @@ expression e; @@ -e->flags |= WIPHY_FLAG_STRICT_REGULATORY +e->regulatory_flags |= REGULATORY_STRICT_REG @@ struct wiphy *wiphy; @@ -wiphy->flags &= ~WIPHY_FLAG_STRICT_REGULATORY +wiphy->regulatory_flags &= ~REGULATORY_STRICT_REG @@ struct wiphy *wiphy; @@ -wiphy->flags & WIPHY_FLAG_STRICT_REGULATORY +wiphy->regulatory_flags & REGULATORY_STRICT_REG @@ struct wiphy *wiphy; @@ -wiphy->flags |= WIPHY_FLAG_DISABLE_BEACON_HINTS +wiphy->regulatory_flags |= REGULATORY_DISABLE_BEACON_HINTS @@ expression e; @@ -e->flags |= WIPHY_FLAG_DISABLE_BEACON_HINTS +e->regulatory_flags |= REGULATORY_DISABLE_BEACON_HINTS @@ struct wiphy *wiphy; @@ -wiphy->flags &= ~WIPHY_FLAG_DISABLE_BEACON_HINTS +wiphy->regulatory_flags &= ~REGULATORY_DISABLE_BEACON_HINTS @@ struct wiphy *wiphy; @@ -wiphy->flags & WIPHY_FLAG_DISABLE_BEACON_HINTS +wiphy->regulatory_flags & REGULATORY_DISABLE_BEACON_HINTS Generated-by: Coccinelle SmPL Cc: Julia Lawall <julia.lawall@lip6.fr> Cc: Peter Senna Tschudin <peter.senna@gmail.com> Cc: Mihir Shete <smihir@qti.qualcomm.com> Cc: Henri Bahini <hbahini@qca.qualcomm.com> Cc: Tushnim Bhattacharyya <tushnimb@qca.qualcomm.com> Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com> [fix up whitespace damage, overly long lines] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-11-25cfg80211: don't allow drivers to unset NL80211_FEATURE_SCAN_FLUSHJohannes Berg
As the flag is entirely implemented in cfg80211, it should have been a global feature flag (which I believe didn't exist at the time). However, there's no reason to allow drivers to unset the flag, so don't allow it and remove the validation of NL80211_SCAN_FLAG_FLUSH. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-11-25cfg80211: disable 5/10 MHz support for all driversJohannes Berg
Due to nl80211 API breakage, 5/10 MHz support is broken for all drivers. Fixing it requires adding new API, but that can't be done as a bugfix commit since that would require either updating all APIs in the trees needing the bugfix or cause different kernels to have incompatible API. Therefore, just disable 5/10 MHz support for all drivers. Cc: stable@vger.kernel.org [3.12] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-10-09cfg80211: don't add p2p device while in RFKILLEmmanuel Grumbach
Since P2P device doesn't have a netdev associated to it, we cannot prevent the user to start it when in RFKILL. So refuse to even add it when in RFKILL. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-09-26cfg80211: fix sysfs registration raceJohannes Berg
My locking rework/race fixes caused a regression in the registration, causing uevent notifications for wireless devices before the device is really fully registered and available in nl80211. Fix this by moving the device_add() under rtnl and move the rfkill to afterwards (it can't be under rtnl.) Reported-and-tested-by: Maxime Bizon <mbizon@freebox.fr> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-08-09Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless
2013-07-31cfg80211: fix P2P GO interface teardownJohannes Berg
When a P2P GO interface goes down, cfg80211 doesn't properly tear it down, leading to warnings later. Add the GO interface type to the enumeration to tear it down like AP interfaces. Otherwise, we leave it pending and mac80211's state can get very confused, leading to warnings later. Cc: stable@vger.kernel.org Reported-by: Ilan Peer <ilan.peer@intel.com> Tested-by: Ilan Peer <ilan.peer@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-07-16cfg80211/nl80211: Add packet coalesce supportAmitkumar Karwar
In most cases, host that receives IPv4 and IPv6 multicast/broadcast packets does not do anything with these packets. Therefore the reception of these unwanted packets causes unnecessary processing and power consumption. Packet coalesce feature helps to reduce number of received interrupts to host by buffering these packets in firmware/hardware for some predefined time. Received interrupt will be generated when one of the following events occur. a) Expiration of hardware timer whose expiration time is set to maximum coalescing delay of matching coalesce rule. b) Coalescing buffer in hardware reaches it's limit. c) Packet doesn't match any of the configured coalesce rules. This patch adds set/get configuration support for packet coalesce. User needs to configure following parameters for creating a coalesce rule. a) Maximum coalescing delay b) List of packet patterns which needs to be matched c) Condition for coalescence. pattern 'match' or 'no match' Multiple such rules can be created. This feature needs to be advertised during driver initialization. Drivers are supposed to do required firmware/hardware settings based on user configuration. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> [fix kernel-doc, change free function, fix copy/paste error] Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
2013-06-28Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next into for-davem Conflicts: net/wireless/nl80211.c
2013-06-24wireless: check for dangling wdev->current_bss pointerBen Greear
If it *is* still set when the netdev is being deleted, then we are about to leak a pointer. Warn and clean up in that case. Signed-off-by: Ben Greear <greearb@candelatech.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-06-21Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next into for-davem Conflicts: net/wireless/nl80211.c
2013-06-11Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next into for-davem Conflicts: drivers/net/wireless/ath/ath9k/debug.c net/mac80211/iface.c
2013-06-04cfg80211: make wiphy index start at 0 againJohannes Berg
The change to use atomic_inc_return() for assigning the wiphy index made the first wiphy index 1 instead of 0. This is fine, but we all habitually type "phy0" when we're testing, so make it go back to 0 instead of 1 by subtracting 1 from the index. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-30 07:36:03 +0000