summaryrefslogtreecommitdiff
path: root/net/wireless/Makefile
AgeCommit message (Collapse)Author
2014-11-04cfg80211: 802.11p OCB mode handlingRostislav Lisovy
This patch adds new iface type (NL80211_IFTYPE_OCB) representing the OCB (Outside the Context of a BSS) mode. When establishing a connection to the network a cfg80211_join_ocb function is called (particular nl80211_command is added as well). A mandatory parameters during the ocb_join operation are 'center frequency' and 'channel width (5/10 MHz)'. Changes done in mac80211 are minimal possible required to avoid many warnings (warning: enumeration value 'NL80211_IFTYPE_OCB' not handled in switch) during compilation. Full functionality (where needed) is added in the following patch. Signed-off-by: Rostislav Lisovy <rostislav.lisovy@fel.cvut.cz> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-10-18cfg80211: add tracing to rdev-opsBeni Lev
Add tracing to make debugging cfg80211/mac80211 (or full-mac driver) interaction easier. Signed-off-by: Beni Lev <beni.lev@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Hila Gonen <hila.gonen@intel.com> Tested-by: Hila Gonen <hila.gonen@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> [add a cast to int to sizeof() to avoid warning] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-06-29cfg80211: introduce cfg80211_stop_apMichal Kazior
This functionality will be reused when interface is going down. Avoids code duplication. Also adds missing wdev locking. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2010-12-06cfg80211/mac80211: add mesh join/leave commandsJohannes Berg
Instead of tying mesh activity to interface up, add join and leave commands for mesh. Since we must be backward compatible, let cfg80211 handle joining a mesh if a mesh ID was pre-configured when the device goes up. Note that this therefore must modify mac80211 as well since mac80211 needs to lose the logic to start the mesh on interface up. We now allow querying mesh parameters before the mesh is connected, which simply returns defaults. Setting them (internally renamed to "update") is only allowed while connected. Specify them with the new mesh join command instead where needed. In mac80211, beaconing must now also follow the mesh enabled/not enabled state, which is done by testing the mesh ID. Signed-off-by: Javier Cardona <javier@cozybit.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-21wireless: support internal statically compiled regulatory databaseJohn W. Linville
This patch provides infrastructure for machine translation of the regulatory rules database used by CRDA into a C data structure. It includes code for searching that database as an alternative to dynamic regulatory rules updates via CRDA. Most people should use CRDA instead of this infrastructure, but it provides a better alternative than the WIRELESS_OLD_REGULATORY infrastructure (which can now be removed). Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-07wireless: implement basic ethtool support for cfg80211 devicesJohn W. Linville
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-07wext: refactorJohannes Berg
Refactor wext to * split out iwpriv handling * split out iwspy handling * split out procfs support * allow cfg80211 to have wireless extensions compat code w/o CONFIG_WIRELESS_EXT After this, drivers need to - select WIRELESS_EXT - for wext support - select WEXT_PRIV - for iwpriv support - select WEXT_SPY - for iwspy support except cfg80211 -- which gets new hooks in wext-core.c and can then get wext handlers without CONFIG_WIRELESS_EXT. Wireless extensions procfs support is auto-selected based on PROC_FS and anything that requires the wext core (i.e. WIRELESS_EXT or CFG80211_WEXT). Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-14cfg80211: validate channel settings across interfacesJohannes Berg
Currently, there's a problem that affects regulatory enforcement and connection stability, in that it is possible to switch the channel while connected to a network or joined to an IBSS. The problem comes from the fact that we only validate the channel against the current interface's type, not against any other interface. Thus, you have any type of interface up, additionally bring up a monitor mode interface and switch the channel on the monitor. This will obviously also switch the channel on the other interface. The problem now is that if you do that while sending beacons for IBSS mode, you can switch to a disabled channel or a channel that doesn't allow beaconing. Combined with a managed mode interface connected to an AP instead of an IBSS interface, you can easily break the connection that way. To fix this, this patch validates any channel change with all available interfaces, and disallows such changes on secondary interfaces if another interface is connected to an AP or joined to an IBSS. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-10cfg80211: managed mode wext compatibilityJohannes Berg
This adds code to make it possible to use the cfg80211 connect() API with wireless extensions, and because the previous patch added emulation of that API with auth() and assoc(), by extension also supports wext on that. At the same time, removes code from mac80211 for wext, but doesn't yet clean up mac80211's mlme code more. Signed-off-by: Samuel Ortiz <samuel.ortiz@intel.com> Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-10cfg80211: connect/disconnect APISamuel Ortiz
This patch introduces the cfg80211 connect/disconnect API. The goal here is to run the AUTH and ASSOC steps in one call. This is needed for some fullmac cards that run both steps directly from the target, after the host driver sends a connect command. Additionally, all the new crypto parameters for connect() are now also valid for associate() -- although associate requires the IEs to be used, the information can be useful for drivers and should be given. Signed-off-by: Samuel Ortiz <samuel.ortiz@intel.com> Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-05-20mac80211/cfg80211: move wiphy specific debugfs entries to cfg80211Luis R. Rodriguez
This moves the cfg80211 specific stuff to new cfg80211 debugfs entries. Non-mac80211 will also get these entries now. There were only 4 which we take: rts_threshold fragmentation_threshold short_retry_limit long_retry_limit Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22cfg80211/nl80211: add IBSS APIJohannes Berg
This adds IBSS API along with (preliminary) wext handlers. The wext handlers can only do IBSS so you need to call them from your own wext handlers if the mode is IBSS. The nl80211 API requires * an SSID * a channel (frequency) for the case that a new IBSS has to be created It optionally supports * a flag to fix the channel * a fixed BSSID The cfg80211 code also takes care to leave the IBSS before the netdev is set down. If wireless extensions are used, it also caches values when the interface is down and instructs the driver to join when the interface is set up. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-27nl80211: Event notifications for MLME eventsJouni Malinen
Add new nl80211 event notifications (and a new multicast group, "mlme") for informing user space about received and processed Authentication, (Re)Association Response, Deauthentication, and Disassociation frames in station and IBSS modes (i.e., MLME SAP interface primitives MLME-AUTHENTICATE.confirm, MLME-ASSOCIATE.confirm, MLME-REASSOCIATE.confirm, MLME-DEAUTHENTICATE.indicate, and MLME-DISASSOCIATE.indication). The event data is encapsulated as the 802.11 management frame since we already have the frame in that format and it includes all the needed information. This is the initial step in providing MLME SAP interface for authentication and association with nl80211. In other words, kernel code will act as the MLME and a user space application can control it as the SME. Signed-off-by: Jouni Malinen <j@w1.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-27cfg80211/nl80211: remove usage of CONFIG_NL80211Reinette Chatre
The scan capability added to cfg80211/nl80211 introduced a dependency on nl80211 by cfg80211. We can thus no longer have just cfg80211 without nl80211. Specifically, cfg80211_scan_done() calls nl80211_send_scan_aborted() or nl80211_send_scan_done(). Now we remove the option for user to select nl80211. It will always be compiled if user selects cfg80211. Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-13cfg80211/nl80211: scanning (and mac80211 update to use it)Johannes Berg
This patch adds basic scan capability to cfg80211/nl80211 and changes mac80211 to use it. The BSS list that cfg80211 maintains is made driver-accessible with a private area in each BSS struct, but mac80211 doesn't yet use it. That's another large project. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-12mac80211/cfg80211: check endianness in sparse runsJohannes Berg
Make sure sparse checks endianness when run on mac80211/cfg80211. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-05cfg80211: handle SIOCGIWNAMEJohannes Berg
This patch moves the SIOCGIWNAME handling from mac80211 to cfg80211. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-21lib80211: absorb crypto bits from net/ieee80211John W. Linville
These bits are shared already between ipw2x00 and hostap, and could probably be shared both more cleanly and with other drivers. This commit simply relocates the code to lib80211 and adjusts the drivers appropriately. Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-10-31wireless: consolidate on a single escape_essid implementationJohn W. Linville
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-02-29cfg80211 API for channels/bitrates, mac80211 and driver conversionJohannes Berg
This patch creates new cfg80211 wiphy API for channel and bitrate registration and converts mac80211 and drivers to the new API. The old mac80211 API is completely ripped out. All drivers (except ath5k) are updated to the new API, in many cases I expect that optimisations can be done. Along with the regulatory code I've also ripped out the IEEE80211_HW_DEFAULT_REG_DOMAIN_CONFIGURED flag, I believe it to be unnecessary if the hardware simply gives us whatever channels it wants to support and we then enable/disable them as required, which is pretty much required for travelling. Additionally, the patch adds proper "basic" rate handling for STA mode interface, AP mode interface will have to have new API added to allow userspace to set the basic rate set, currently it'll be empty... However, the basic rate handling will need to be moved to the BSS conf stuff. I do expect there to be bugs in this, especially wrt. transmit power handling where I'm basically clueless about how it should work. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10[NL80211]: add netlink interface to cfg80211Johannes Berg
Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-12[PATCH] cfg80211: Radiotap parserAndy Green
Generic code to walk through the fields in a radiotap header, accounting for nasties like extended "field present" bitfields and alignment rules Signed-off-by: Andy Green <andy@warmcat.com> Signed-off-by: Jiri Benc <jbenc@suse.cz> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-04-26[WEXT]: Move to net/wirelessJohannes Berg
This patch moves dev/core/wireless.c to net/wireless/wext.c. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-25[WIRELESS] cfg80211: New wireless config infrastructure.Johannes Berg
This patch creates the core cfg80211 code along with some sysfs bits. This is a stripped down version to allow mac80211 to function, but doesn't include any configuration yet except for creating and removing virtual interfaces. This patch includes the nl80211 header file but it only contains the interface types which the cfg80211 interface for creating virtual interfaces relies on. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-25[WIRELESS]: Refactor wireless Kconfig.Johannes Berg
This patch refactors the wireless Kconfig all over and already introduces net/wireless/Kconfig with just the WEXT bit for now, the cfg80211 patch will add to that as well. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>