summaryrefslogtreecommitdiff
path: root/net/tls
AgeCommit message (Collapse)Author
2020-04-08net/tls: fix const assignment warningArnd Bergmann
Building with some experimental patches, I came across a warning in the tls code: include/linux/compiler.h:215:30: warning: assignment discards 'const' qualifier from pointer target type [-Wdiscarded-qualifiers] 215 | *(volatile typeof(x) *)&(x) = (val); \ | ^ net/tls/tls_main.c:650:4: note: in expansion of macro 'smp_store_release' 650 | smp_store_release(&saved_tcpv4_prot, prot); This appears to be a legitimate warning about assigning a const pointer into the non-const 'saved_tcpv4_prot' global. Annotate both the ipv4 and ipv6 pointers 'const' to make the code internally consistent. Fixes: 5bb4c45d466c ("net/tls: Read sk_prot once when building tls proto ops") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-21net/tls: Annotate access to sk_prot with READ_ONCE/WRITE_ONCEJakub Sitnicki
sockmap performs lockless writes to sk->sk_prot on the following paths: tcp_bpf_{recvmsg|sendmsg} / sock_map_unref sk_psock_put sk_psock_drop sk_psock_restore_proto WRITE_ONCE(sk->sk_prot, proto) To prevent load/store tearing [1], and to make tooling aware of intentional shared access [2], we need to annotate other sites that access sk_prot with READ_ONCE/WRITE_ONCE macros. Change done with Coccinelle with following semantic patch: @@ expression E; identifier I; struct sock *sk; identifier sk_prot =~ "^sk_prot$"; @@ ( E = -sk->sk_prot +READ_ONCE(sk->sk_prot) | -sk->sk_prot = E +WRITE_ONCE(sk->sk_prot, E) | -sk->sk_prot +READ_ONCE(sk->sk_prot) ->I ) Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-21net/tls: Read sk_prot once when building tls proto opsJakub Sitnicki
Apart from being a "tremendous" win when it comes to generated machine code (see bloat-o-meter output for x86-64 below) this mainly prepares ground for annotating access to sk_prot with READ_ONCE, so that we don't pepper the code with access annotations and needlessly repeat loads. add/remove: 0/0 grow/shrink: 0/1 up/down: 0/-46 (-46) Function old new delta tls_init 851 805 -46 Total: Before=21063, After=21017, chg -0.22% Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-21net/tls: Constify base proto ops used for building tls protoJakub Sitnicki
The helper that builds kTLS proto ops doesn't need to and should not modify the base proto ops. Annotate the parameter as read-only. Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-21Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextDavid S. Miller
Daniel Borkmann says: ==================== pull-request: bpf-next 2020-02-21 The following pull-request contains BPF updates for your *net-next* tree. We've added 25 non-merge commits during the last 4 day(s) which contain a total of 33 files changed, 2433 insertions(+), 161 deletions(-). The main changes are: 1) Allow for adding TCP listen sockets into sock_map/hash so they can be used with reuseport BPF programs, from Jakub Sitnicki. 2) Add a new bpf_program__set_attach_target() helper for adding libbpf support to specify the tracepoint/function dynamically, from Eelco Chaudron. 3) Add bpf_read_branch_records() BPF helper which helps use cases like profile guided optimizations, from Daniel Xu. 4) Enable bpf_perf_event_read_value() in all tracing programs, from Song Liu. 5) Relax BTF mandatory check if only used for libbpf itself e.g. to process BTF defined maps, from Andrii Nakryiko. 6) Move BPF selftests -mcpu compilation attribute from 'probe' to 'v3' as it has been observed that former fails in envs with low memlock, from Yonghong Song. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-21net, sk_msg: Annotate lockless access to sk_prot on cloneJakub Sitnicki
sk_msg and ULP frameworks override protocol callbacks pointer in sk->sk_prot, while tcp accesses it locklessly when cloning the listening socket, that is with neither sk_lock nor sk_callback_lock held. Once we enable use of listening sockets with sockmap (and hence sk_msg), there will be shared access to sk->sk_prot if socket is getting cloned while being inserted/deleted to/from the sockmap from another CPU: Read side: tcp_v4_rcv sk = __inet_lookup_skb(...) tcp_check_req(sk) inet_csk(sk)->icsk_af_ops->syn_recv_sock tcp_v4_syn_recv_sock tcp_create_openreq_child inet_csk_clone_lock sk_clone_lock READ_ONCE(sk->sk_prot) Write side: sock_map_ops->map_update_elem sock_map_update_elem sock_map_update_common sock_map_link_no_progs tcp_bpf_init tcp_bpf_update_sk_prot sk_psock_update_proto WRITE_ONCE(sk->sk_prot, ops) sock_map_ops->map_delete_elem sock_map_delete_elem __sock_map_delete sock_map_unref sk_psock_put sk_psock_drop sk_psock_restore_proto tcp_update_ulp WRITE_ONCE(sk->sk_prot, proto) Mark the shared access with READ_ONCE/WRITE_ONCE annotations. Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20200218171023.844439-2-jakub@cloudflare.com
2020-02-19net/tls: Fix to avoid gettig invalid tls recordRohit Maheshwari
Current code doesn't check if tcp sequence number is starting from (/after) 1st record's start sequnce number. It only checks if seq number is before 1st record's end sequnce number. This problem will always be a possibility in re-transmit case. If a record which belongs to a requested seq number is already deleted, tls_get_record will start looking into list and as per the check it will look if seq number is before the end seq of 1st record, which will always be true and will return 1st record always, it should in fact return NULL. As part of the fix, start looking each record only if the sequence number lies in the list else return NULL. There is one more check added, driver look for the start marker record to handle tcp packets which are before the tls offload start sequence number, hence return 1st record if the record is tls start marker and seq number is before the 1st record's starting sequence number. Fixes: e8f69799810c ("net/tls: Add generic NIC offload infrastructure") Signed-off-by: Rohit Maheshwari <rohitm@chelsio.com> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-19Merge ra.kernel.org:/pub/scm/linux/kernel/git/netdev/netDavid S. Miller
2020-01-16Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfDavid S. Miller
Daniel Borkmann says: ==================== pull-request: bpf 2020-01-15 The following pull-request contains BPF updates for your *net* tree. We've added 12 non-merge commits during the last 9 day(s) which contain a total of 13 files changed, 95 insertions(+), 43 deletions(-). The main changes are: 1) Fix refcount leak for TCP time wait and request sockets for socket lookup related BPF helpers, from Lorenz Bauer. 2) Fix wrong verification of ARSH instruction under ALU32, from Daniel Borkmann. 3) Batch of several sockmap and related TLS fixes found while operating more complex BPF programs with Cilium and OpenSSL, from John Fastabend. 4) Fix sockmap to read psock's ingress_msg queue before regular sk_receive_queue() to avoid purging data upon teardown, from Lingpeng Chen. 5) Fix printing incorrect pointer in bpftool's btf_dump_ptr() in order to properly dump a BPF map's value with BTF, from Martin KaFai Lau. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-15bpf: Sockmap/tls, fix pop data with SK_DROP return codeJohn Fastabend
When user returns SK_DROP we need to reset the number of copied bytes to indicate to the user the bytes were dropped and not sent. If we don't reset the copied arg sendmsg will return as if those bytes were copied giving the user a positive return value. This works as expected today except in the case where the user also pops bytes. In the pop case the sg.size is reduced but we don't correctly account for this when copied bytes is reset. The popped bytes are not accounted for and we return a small positive value potentially confusing the user. The reason this happens is due to a typo where we do the wrong comparison when accounting for pop bytes. In this fix notice the if/else is not needed and that we have a similar problem if we push data except its not visible to the user because if delta is larger the sg.size we return a negative value so it appears as an error regardless. Fixes: 7246d8ed4dcce ("bpf: helper to pop data from messages") Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Jonathan Lemon <jonathan.lemon@gmail.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/bpf/20200111061206.8028-9-john.fastabend@gmail.com
2020-01-15bpf: Sockmap/tls, skmsg can have wrapped skmsg that needs extra chainingJohn Fastabend
Its possible through a set of push, pop, apply helper calls to construct a skmsg, which is just a ring of scatterlist elements, with the start value larger than the end value. For example, end start |_0_|_1_| ... |_n_|_n+1_| Where end points at 1 and start points and n so that valid elements is the set {n, n+1, 0, 1}. Currently, because we don't build the correct chain only {n, n+1} will be sent. This adds a check and sg_chain call to correctly submit the above to the crypto and tls send path. Fixes: d3b18ad31f93d ("tls: add bpf support to sk_msg handling") Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Jonathan Lemon <jonathan.lemon@gmail.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/bpf/20200111061206.8028-8-john.fastabend@gmail.com
2020-01-15bpf: Sockmap/tls, tls_sw can create a plaintext buf > encrypt bufJohn Fastabend
It is possible to build a plaintext buffer using push helper that is larger than the allocated encrypt buffer. When this record is pushed to crypto layers this can result in a NULL pointer dereference because the crypto API expects the encrypt buffer is large enough to fit the plaintext buffer. Kernel splat below. To resolve catch the cases this can happen and split the buffer into two records to send individually. Unfortunately, there is still one case to handle where the split creates a zero sized buffer. In this case we merge the buffers and unmark the split. This happens when apply is zero and user pushed data beyond encrypt buffer. This fixes the original case as well because the split allocated an encrypt buffer larger than the plaintext buffer and the merge simply moves the pointers around so we now have a reference to the new (larger) encrypt buffer. Perhaps its not ideal but it seems the best solution for a fixes branch and avoids handling these two cases, (a) apply that needs split and (b) non apply case. The are edge cases anyways so optimizing them seems not necessary unless someone wants later in next branches. [ 306.719107] BUG: kernel NULL pointer dereference, address: 0000000000000008 [...] [ 306.747260] RIP: 0010:scatterwalk_copychunks+0x12f/0x1b0 [...] [ 306.770350] Call Trace: [ 306.770956] scatterwalk_map_and_copy+0x6c/0x80 [ 306.772026] gcm_enc_copy_hash+0x4b/0x50 [ 306.772925] gcm_hash_crypt_remain_continue+0xef/0x110 [ 306.774138] gcm_hash_crypt_continue+0xa1/0xb0 [ 306.775103] ? gcm_hash_crypt_continue+0xa1/0xb0 [ 306.776103] gcm_hash_assoc_remain_continue+0x94/0xa0 [ 306.777170] gcm_hash_assoc_continue+0x9d/0xb0 [ 306.778239] gcm_hash_init_continue+0x8f/0xa0 [ 306.779121] gcm_hash+0x73/0x80 [ 306.779762] gcm_encrypt_continue+0x6d/0x80 [ 306.780582] crypto_gcm_encrypt+0xcb/0xe0 [ 306.781474] crypto_aead_encrypt+0x1f/0x30 [ 306.782353] tls_push_record+0x3b9/0xb20 [tls] [ 306.783314] ? sk_psock_msg_verdict+0x199/0x300 [ 306.784287] bpf_exec_tx_verdict+0x3f2/0x680 [tls] [ 306.785357] tls_sw_sendmsg+0x4a3/0x6a0 [tls] test_sockmap test signature to trigger bug, [TEST]: (1, 1, 1, sendmsg, pass,redir,start 1,end 2,pop (1,2),ktls,): Fixes: d3b18ad31f93d ("tls: add bpf support to sk_msg handling") Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Jonathan Lemon <jonathan.lemon@gmail.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/bpf/20200111061206.8028-7-john.fastabend@gmail.com
2020-01-15bpf: Sockmap/tls, push write_space updates through ulp updatesJohn Fastabend
When sockmap sock with TLS enabled is removed we cleanup bpf/psock state and call tcp_update_ulp() to push updates to TLS ULP on top. However, we don't push the write_space callback up and instead simply overwrite the op with the psock stored previous op. This may or may not be correct so to ensure we don't overwrite the TLS write space hook pass this field to the ULP and have it fixup the ctx. This completes a previous fix that pushed the ops through to the ULP but at the time missed doing this for write_space, presumably because write_space TLS hook was added around the same time. Fixes: 95fa145479fbc ("bpf: sockmap/tls, close can race with map free") Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com> Acked-by: Jonathan Lemon <jonathan.lemon@gmail.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/bpf/20200111061206.8028-4-john.fastabend@gmail.com
2020-01-10net/tls: fix async operationJakub Kicinski
Mallesham reports the TLS with async accelerator was broken by commit d10523d0b3d7 ("net/tls: free the record on encryption error") because encryption can return -EINPROGRESS in such setups, which should not be treated as an error. The error is also present in the BPF path (likely copied from there). Reported-by: Mallesham Jatharakonda <mallesham.jatharakonda@oneconvergence.com> Fixes: d3b18ad31f93 ("tls: add bpf support to sk_msg handling") Fixes: d10523d0b3d7 ("net/tls: free the record on encryption error") Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-10net/tls: avoid spurious decryption error with HW resyncJakub Kicinski
When device loses sync mid way through a record - kernel has to re-encrypt the part of the record which the device already decrypted to be able to decrypt and authenticate the record in its entirety. The re-encryption piggy backs on the decryption routine, but obviously because the partially decrypted record can't be authenticated crypto API returns an error which is then ignored by tls_device_reencrypt(). Commit 5c5ec6685806 ("net/tls: add TlsDecryptError stat") added a statistic to count decryption errors, this statistic can't be incremented when we see the expected re-encryption error. Move the inc to the caller. Reported-and-tested-by: David Beckett <david.beckett@netronome.com> Fixes: 5c5ec6685806 ("net/tls: add TlsDecryptError stat") Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-19net/tls: add helper for testing if socket is RX offloadedJakub Kicinski
There is currently no way for driver to reliably check that the socket it has looked up is in fact RX offloaded. Add a helper. This allows drivers to catch misbehaving firmware. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-06net/tls: Fix return values to avoid ENOTSUPPValentin Vidic
ENOTSUPP is not available in userspace, for example: setsockopt failed, 524, Unknown error 524 Signed-off-by: Valentin Vidic <vvidic@valentin-vidic.from.hr> Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-28net/tls: use sg_next() to walk sg entriesJakub Kicinski
Partially sent record cleanup path increments an SG entry directly instead of using sg_next(). This should not be a problem today, as encrypted messages should be always allocated as arrays. But given this is a cleanup path it's easy to miss was this ever to change. Use sg_next(), and simplify the code. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-28net/tls: remove the dead inplace_crypto codeJakub Kicinski
Looks like when BPF support was added by commit d3b18ad31f93 ("tls: add bpf support to sk_msg handling") and commit d829e9c4112b ("tls: convert to generic sk_msg interface") it broke/removed the support for in-place crypto as added by commit 4e6d47206c32 ("tls: Add support for inplace records encryption"). The inplace_crypto member of struct tls_rec is dead, inited to zero, and sometimes set to zero again. It used to be set to 1 when record was allocated, but the skmsg code doesn't seem to have been written with the idea of in-place crypto in mind. Since non trivial effort is required to bring the feature back and we don't really have the HW to measure the benefit just remove the left over support for now to avoid confusing readers. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-28net/tls: free the record on encryption errorJakub Kicinski
When tls_do_encryption() fails the SG lists are left with the SG_END and SG_CHAIN marks in place. One could hope that once encryption fails we will never see the record again, but that is in fact not true. Commit d3b18ad31f93 ("tls: add bpf support to sk_msg handling") added special handling to ENOMEM and ENOSPC errors which mean we may see the same record re-submitted. As suggested by John free the record, the BPF code is already doing just that. Reported-by: syzbot+df0d4ec12332661dd1f9@syzkaller.appspotmail.com Fixes: d3b18ad31f93 ("tls: add bpf support to sk_msg handling") Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Acked-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-28net/tls: take into account that bpf_exec_tx_verdict() may free the recordJakub Kicinski
bpf_exec_tx_verdict() may free the record if tls_push_record() fails, or if the entire record got consumed by BPF. Re-check ctx->open_rec before touching the data. Fixes: d3b18ad31f93 ("tls: add bpf support to sk_msg handling") Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Acked-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Minor conflict in drivers/s390/net/qeth_l2_main.c, kept the lock from commit c8183f548902 ("s390/qeth: fix potential deadlock on workqueue flush"), removed the code which was removed by commit 9897d583b015 ("s390/qeth: consolidate some duplicated HW cmd code"). Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
2019-11-19net/tls: enable sk_msg redirect to tls socket egressWillem de Bruijn
Bring back tls_sw_sendpage_locked. sk_msg redirection into a socket with TLS_TX takes the following path: tcp_bpf_sendmsg_redir tcp_bpf_push_locked tcp_bpf_push kernel_sendpage_locked sock->ops->sendpage_locked Also update the flags test in tls_sw_sendpage_locked to allow flag MSG_NO_SHARED_FRAGS. bpf_tcp_sendmsg sets this. Link: https://lore.kernel.org/netdev/CA+FuTSdaAawmZ2N8nfDDKu3XLpXBbMtcCT0q4FntDD2gn8ASUw@mail.gmail.com/T/#t Link: https://github.com/wdebruij/kerneltools/commits/icept.2 Fixes: 0608c69c9a80 ("bpf: sk_msg, sock{map|hash} redirect through ULP") Fixes: f3de19af0f5b ("Revert \"net/tls: remove unused function tls_sw_sendpage_locked\"") Signed-off-by: Willem de Bruijn <willemb@google.com> Acked-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-15net/tls: Fix unused function warningYueHaibing
If PROC_FS is not set, gcc warning this: net/tls/tls_proc.c:23:12: warning: 'tls_statistics_seq_show' defined but not used [-Wunused-function] Use #ifdef to guard this. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-09Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller
One conflict in the BPF samples Makefile, some fixes in 'net' whilst we were converting over to Makefile.target rules in 'net-next'. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-06net/tls: add a TX lockJakub Kicinski
TLS TX needs to release and re-acquire the socket lock if send buffer fills up. TLS SW TX path currently depends on only allowing one thread to enter the function by the abuse of sk_write_pending. If another writer is already waiting for memory no new ones are allowed in. This has two problems: - writers don't wake other threads up when they leave the kernel; meaning that this scheme works for single extra thread (second application thread or delayed work) because memory becoming available will send a wake up request, but as Mallesham and Pooja report with larger number of threads it leads to threads being put to sleep indefinitely; - the delayed work does not get _scheduled_ but it may _run_ when other writers are present leading to crashes as writers don't expect state to change under their feet (same records get pushed and freed multiple times); it's hard to reliably bail from the work, however, because the mere presence of a writer does not guarantee that the writer will push pending records before exiting. Ensuring wakeups always happen will make the code basically open code a mutex. Just use a mutex. The TLS HW TX path does not have any locking (not even the sk_write_pending hack), yet it uses a per-socket sg_tx_data array to push records. Fixes: a42055e8d2c3 ("net/tls: Add support for async encryption of records for performance") Reported-by: Mallesham Jatharakonda <mallesh537@gmail.com> Reported-by: Pooja Trivedi <poojatrivedi@gmail.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-06net/tls: don't pay attention to sk_write_pending when pushing partial recordsJakub Kicinski
sk_write_pending being not zero does not guarantee that partial record will be pushed. If the thread waiting for memory times out the pending record may get stuck. In case of tls_device there is no path where parial record is set and writer present in the first place. Partial record is set only in tls_push_sg() and tls_push_sg() will return an error immediately. All tls_device callers of tls_push_sg() will return (and not wait for memory) if it failed. Fixes: a42055e8d2c3 ("net/tls: Add support for async encryption of records for performance") Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-07net/tls: store decrypted on a single bitJakub Kicinski
Use a single bit instead of boolean to remember if packet was already decrypted. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-07net/tls: store async_capable on a single bitJakub Kicinski
Store async_capable on a single bit instead of a full integer to save space. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-07net/tls: pass context to tls_device_decrypted()Jakub Kicinski
Avoid unnecessary pointer chasing and calculations, callers already have most of the state tls_device_decrypted() needs. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-07net/tls: make allocation failure unlikelyJakub Kicinski
Make sure GCC realizes it's unlikely that allocations will fail. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-07net/tls: mark sk->err being set as unlikelyJakub Kicinski
Tell GCC sk->err is not likely to be set. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-05net/tls: add TlsDeviceRxResync statisticJakub Kicinski
Add a statistic for number of RX resyncs sent down to the NIC. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-05net/tls: add TlsDecryptError statJakub Kicinski
Add a statistic for TLS record decryption errors. Since devices are supposed to pass records as-is when they encounter errors this statistic will count bad records in both pure software and inline crypto configurations. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-05net/tls: add statistics for installed sessionsJakub Kicinski
Add SNMP stats for number of sockets with successfully installed sessions. Break them down to software and hardware ones. Note that if hardware offload fails stack uses software implementation, and counts the session appropriately. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-05net/tls: add skeleton of MIB statisticsJakub Kicinski
Add a skeleton structure for adding TLS statistics. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-05net/tls: add device decrypted trace pointJakub Kicinski
Add a tracepoint to the TLS offload's fast path. This tracepoint can be used to track the decrypted and encrypted status of received records. Records decrypted by the device should have decrypted set to 1, records which have neither decrypted nor decrypted set are partially decrypted, require re-encryption and therefore are most expensive to deal with. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-05net/tls: add tracing for device/offload eventsJakub Kicinski
Add tracing of device-related interaction to aid performance analysis, especially around resync: tls:tls_device_offload_set tls:tls_device_rx_resync_send tls:tls_device_rx_resync_nh_schedule tls:tls_device_rx_resync_nh_delay tls:tls_device_tx_resync_req tls:tls_device_tx_resync_send Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-04net/tls: allow compiling TLS TOE outJakub Kicinski
TLS "record layer offload" requires TOE, and bypasses most of the normal networking stack. It is also significantly less maintained. Allow users to compile it out to avoid issues. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: John Hurley <john.hurley@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-04net/tls: rename tls_hw_* functions tls_toe_*Jakub Kicinski
The tls_hw_* functions are quite confusingly named, since they are related to the TOE-offload, not TLS_HW offload which doesn't require TOE. Rename them. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: John Hurley <john.hurley@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-04net/tls: move TOE-related code to a separate fileJakub Kicinski
Move tls_hw_* functions to a new, separate source file to avoid confusion with normal, non-TOE offload. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: John Hurley <john.hurley@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-04net/tls: move tls_build_proto() on init pathJakub Kicinski
Move tls_build_proto() so that TOE offload doesn't have to call it mid way through its bypass enable path. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: John Hurley <john.hurley@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-04net/tls: rename tls_device to tls_toe_deviceJakub Kicinski
Rename struct tls_device to struct tls_toe_device to avoid confusion with normal, non-TOE offload. No functional changes. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: John Hurley <john.hurley@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-04net/tls: move TOE-related structures to a separate headerJakub Kicinski
Move tls_device structure and register/unregister functions to a new header to avoid confusion with normal, non-TOE offload. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: John Hurley <john.hurley@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-07net/tls: align non temporal copy to cache linesJakub Kicinski
Unlike normal TCP code TLS has to touch the cache lines it copies into to fill header info. On memory-heavy workloads having non temporal stores and normal accesses targeting the same cache line leads to significant overhead. Measured 3% overhead running 3600 round robin connections with additional memory heavy workload. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-07net/tls: remove the record tail optimizationJakub Kicinski
For TLS device offload the tag/message authentication code are filled in by the device. The kernel merely reserves space for them. Because device overwrites it, the contents of the tag make do no matter. Current code tries to save space by reusing the header as the tag. This, however, leads to an additional frag being created and defeats buffer coalescing (which trickles all the way down to the drivers). Remove this optimization, and try to allocate the space for the tag in the usual way, leave the memory uninitialized. If memory allocation fails rewind the record pointer so that we use the already copied user data as tag. Note that the optimization was actually buggy, as the tag for TLS 1.2 is 16 bytes, but header is just 13, so the reuse may had looked past the end of the page.. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-07net/tls: use RCU for the adder to the offload record listJakub Kicinski
All modifications to TLS record list happen under the socket lock. Since records form an ordered queue readers are only concerned about elements being removed, additions can happen concurrently. Use RCU primitives to ensure the correct access types (READ_ONCE/WRITE_ONCE). Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-07net/tls: unref frags in orderJakub Kicinski
It's generally more cache friendly to walk arrays in order, especially those which are likely not in cache. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-05net/tls: dedup the record cleanupJakub Kicinski
If retransmit record hint fall into the cleanup window we will free it by just walking the list. No need to duplicate the code. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: John Hurley <john.hurley@netronome.com> Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-05net/tls: clean up the number of #ifdefs for CONFIG_TLS_DEVICEJakub Kicinski
TLS code has a number of #ifdefs which make the code a little harder to follow. Recent fixes removed the ifdef around the TLS_HW define, so we can switch to the often used pattern of defining tls_device functions as empty static inlines in the header when CONFIG_TLS_DEVICE=n. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: John Hurley <john.hurley@netronome.com> Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com> Acked-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-01 01:12:04 +0000