summaryrefslogtreecommitdiff
path: root/net/switchdev/switchdev.c
AgeCommit message (Collapse)Author
2020-02-26net: switchdev: do not propagate bridge updates across bridgesRussell King
When configuring a tree of independent bridges, propagating changes from the upper bridge across a bridge master to the lower bridge ports brings surprises. For example, a lower bridge may have vlan filtering enabled. It may have a vlan interface attached to the bridge master, which may then be incorporated into another bridge. As soon as the lower bridge vlan interface is attached to the upper bridge, the lower bridge has vlan filtering disabled. This occurs because switchdev recursively applies its changes to all lower devices no matter what. Reviewed-by: Ido Schimmel <idosch@mellanox.com> Tested-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-17net: switchdev: Replace zero-length array with flexible-array memberGustavo A. R. Silva
The current codebase makes use of the zero-length array language extension to the C90 standard, but the preferred mechanism to declare variable-length types such as these ones is a flexible array member[1][2], introduced in C99: struct foo { int stuff; struct boo array[]; }; By making use of the mechanism above, we will get a compiler warning in case the flexible array does not occur last in the structure, which will help us prevent some kind of undefined behavior bugs from being inadvertently introduced[3] to the codebase from now on. Also, notice that, dynamic memory allocations won't be affected by this change: "Flexible array members have incomplete type, and so the sizeof operator may not be applied. As a quirk of the original implementation of zero-length arrays, sizeof evaluates to zero."[1] This issue was found with the help of Coccinelle. [1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html [2] https://github.com/KSPP/linux/issues/21 [3] commit 76497732932f ("cxgb3/l2t: Fix undefined behaviour") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152Thomas Gleixner
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 3029 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-01switchdev: Remove unused transaction item queueFlorian Fainelli
There are no more in tree users of the switchdev_trans_item_{dequeue,enqueue} or switchdev_trans_item structure in the kernel since commit 00fc0c51e35b ("rocker: Change world_ops API and implementation to be switchdev independant"). Remove this unused code and update the documentation accordingly since. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-27net: switchdev: Replace port attr set SDO with a notificationFlorian Fainelli
Drop switchdev_ops.switchdev_port_attr_set. Drop the uses of this field from all clients, which were migrated to use switchdev notification in the previous patches. Add a new function switchdev_port_attr_notify() that sends the switchdev notifications SWITCHDEV_PORT_ATTR_SET and calls the blocking (process) notifier chain. We have one odd case within net/bridge/br_switchdev.c with the SWITCHDEV_ATTR_ID_PORT_PRE_BRIDGE_FLAGS attribute identifier that requires executing from atomic context, we deal with that one specifically. Drop __switchdev_port_attr_set() and update switchdev_port_attr_set() likewise. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-27switchdev: Add SWITCHDEV_PORT_ATTR_SETFlorian Fainelli
In preparation for allowing switchdev enabled drivers to veto specific attribute settings from within the context of the caller, introduce a new switchdev notifier type for port attributes. Suggested-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-24switchdev: Complete removal of switchdev_port_attr_get()Florian Fainelli
We have no more in tree users of switchdev_port_attr_get() after d0e698d57a94 ("Merge branch 'net-Get-rid-of-switchdev_port_attr_get'") so completely remove the function signature and body. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-06net: Get rid of SWITCHDEV_ATTR_ID_PORT_PARENT_IDFlorian Fainelli
Now that we have a dedicated NDO for getting a port's parent ID, get rid of SWITCHDEV_ATTR_ID_PORT_PARENT_ID and convert all callers to use the NDO exclusively. This is a preliminary change to getting rid of switchdev_ops eventually. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-17switchdev: Add extack argument to call_switchdev_notifiers()Petr Machata
A follow-up patch will enable vetoing of FDB entries. Make it possible to communicate details of why an FDB entry is not acceptable back to the user. Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-12net: switchdev: Add extack to switchdev_handle_port_obj_add() callbackPetr Machata
Drivers use switchdev_handle_port_obj_add() to handle recursive descent through lower devices. Change this function prototype to take add_cb that itself takes an extack argument. Decode extack from switchdev_notifier_port_obj_info and pass it to add_cb. Update mlxsw and ocelot drivers which use this helper. Signed-off-by: Petr Machata <petrm@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Ivan Vecera <ivecera@redhat.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-12net: switchdev: Add extack to struct switchdev_notifier_infoPetr Machata
In order to pass extack to the drivers that need it, add an extack field to struct switchdev_notifier_info, and an extack argument to the function call_switchdev_blocking_notifiers(). Also add a helper function switchdev_notifier_info_to_extack(). Signed-off-by: Petr Machata <petrm@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Ivan Vecera <ivecera@redhat.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-12net: switchdev: Add extack argument to switchdev_port_obj_add()Petr Machata
After the previous patch, bridge driver has extack argument available to pass to switchdev. Therefore extend switchdev_port_obj_add() with this argument, updating all callers, and passing the argument through to switchdev_port_obj_notify(). Signed-off-by: Petr Machata <petrm@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Ivan Vecera <ivecera@redhat.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-23switchdev: Replace port obj add/del SDO with a notificationPetr Machata
Drop switchdev_ops.switchdev_port_obj_add and _del. Drop the uses of this field from all clients, which were migrated to use switchdev notification in the previous patches. Add a new function switchdev_port_obj_notify() that sends the switchdev notifications SWITCHDEV_PORT_OBJ_ADD and _DEL. Update switchdev_port_obj_del_now() to dispatch to this new function. Drop __switchdev_port_obj_add() and update switchdev_port_obj_add() likewise. Signed-off-by: Petr Machata <petrm@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-23switchdev: Add helpers to aid traversal through lower devicesPetr Machata
After the transition from switchdev operations to notifier chain (which will take place in following patches), the onus is on the driver to find its own devices below possible layer of LAG or other uppers. The logic to do so is fairly repetitive: each driver is looking for its own devices among the lowers of the notified device. For those that it finds, it calls a handler. To indicate that the event was handled, struct switchdev_notifier_port_obj_info.handled is set. The differences lie only in what constitutes an "own" device and what handler to call. Therefore abstract this logic into two helpers, switchdev_handle_port_obj_add() and switchdev_handle_port_obj_del(). If a driver only supports physical ports under a bridge device, it will simply avoid this layer of indirection. One area where this helper diverges from the current switchdev behavior is the case of mixed lowers, some of which are switchdev ports and some of which are not. Previously, such scenario would fail with -EOPNOTSUPP. The helper could do that for lowers for which the passed-in predicate doesn't hold. That would however break the case that switchdev ports from several different drivers are stashed under one master, a scenario that switchdev currently happily supports. Therefore tolerate any and all unknown netdevices, whether they are backed by a switchdev driver or not. Signed-off-by: Petr Machata <petrm@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-23switchdev: Add a blocking notifier chainPetr Machata
In general one can't assume that a switchdev notifier is called in a non-atomic context, and correspondingly, the switchdev notifier chain is an atomic one. However, port object addition and deletion messages are delivered from a process context. Even the MDB addition messages, whose delivery is scheduled from atomic context, are queued and the delivery itself takes place in blocking context. For VLAN messages in particular, keeping the blocking nature is important for error reporting. Therefore introduce a blocking notifier chain and related service functions to distribute the notifications for which a blocking context can be assumed. Signed-off-by: Petr Machata <petrm@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-10net: bridge: Add/del switchdev object on host join/leaveAndrew Lunn
When the host joins or leaves a multicast group, use switchdev to add an object to the hardware to forward traffic for the group to the host. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-07net: switchdev: Remove bridge bypass support from switchdevArkadi Sharshevsky
Currently the bridge port flags, vlans, FDBs and MDBs can be offloaded through the bridge code, making the switchdev's SELF bridge bypass implementation to be redundant. This implies several changes: - No need for dump infra in switchdev, DSA's special case is handled privately. - Remove obj_dump from switchdev_ops. - FDBs are removed from obj_add/del routines, due to the fact that they are offloaded through the bridge notification chain. - The switchdev_port_bridge_xx() and switchdev_port_fdb_xx() functions can be removed. Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Ivan Vecera <ivecera@redhat.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-07net: dsa: Move FDB dump implementation inside DSAArkadi Sharshevsky
>From all switchdev devices only DSA requires special FDB dump. This is due to lack of ability for syncing the hardware learned FDBs with the bridge. Due to this it is removed from switchdev and moved inside DSA. Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-08net: switchdev: Change notifier chain to be atomicArkadi Sharshevsky
In order to use the switchdev notifier chain for FDB sync with the device it has to be changed to atomic. The is done because the bridge can learn new FDBs in atomic context. Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Ivan Vecera <ivecera@redhat.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Ivan Vecera <ivecera@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-13netlink: pass extended ACK struct to parsing functionsJohannes Berg
Pass the new extended ACK reporting struct to all of the generic netlink parsing functions. For now, pass NULL in almost all callers (except for some in the core.) Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-30Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Mostly simple overlapping changes. For example, David Ahern's adjacency list revamp in 'net-next' conflicted with an adjacency list traversal bug fix in 'net'. Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-29switchdev: Remove redundant variableIdo Schimmel
Instead of storing return value in 'err' and returning, just return directly. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-19switchdev: Execute bridge ndos only for bridge portsIdo Schimmel
We recently got the following warning after setting up a vlan device on top of an offloaded bridge and executing 'bridge link': WARNING: CPU: 0 PID: 18566 at drivers/net/ethernet/mellanox/mlxsw/spectrum_switchdev.c:81 mlxsw_sp_port_orig_get.part.9+0x55/0x70 [mlxsw_spectrum] [...] CPU: 0 PID: 18566 Comm: bridge Not tainted 4.8.0-rc7 #1 Hardware name: Mellanox Technologies Ltd. Mellanox switch/Mellanox switch, BIOS 4.6.5 05/21/2015 0000000000000286 00000000e64ab94f ffff880406e6f8f0 ffffffff8135eaa3 0000000000000000 0000000000000000 ffff880406e6f930 ffffffff8108c43b 0000005106e6f988 ffff8803df398840 ffff880403c60108 ffff880406e6f990 Call Trace: [<ffffffff8135eaa3>] dump_stack+0x63/0x90 [<ffffffff8108c43b>] __warn+0xcb/0xf0 [<ffffffff8108c56d>] warn_slowpath_null+0x1d/0x20 [<ffffffffa01420d5>] mlxsw_sp_port_orig_get.part.9+0x55/0x70 [mlxsw_spectrum] [<ffffffffa0142195>] mlxsw_sp_port_attr_get+0xa5/0xb0 [mlxsw_spectrum] [<ffffffff816f151f>] switchdev_port_attr_get+0x4f/0x140 [<ffffffff816f15d0>] switchdev_port_attr_get+0x100/0x140 [<ffffffff816f15d0>] switchdev_port_attr_get+0x100/0x140 [<ffffffff816f1d6b>] switchdev_port_bridge_getlink+0x5b/0xc0 [<ffffffff816f2680>] ? switchdev_port_fdb_dump+0x90/0x90 [<ffffffff815f5427>] rtnl_bridge_getlink+0xe7/0x190 [<ffffffff8161a1b2>] netlink_dump+0x122/0x290 [<ffffffff8161b0df>] __netlink_dump_start+0x15f/0x190 [<ffffffff815f5340>] ? rtnl_bridge_dellink+0x230/0x230 [<ffffffff815fab46>] rtnetlink_rcv_msg+0x1a6/0x220 [<ffffffff81208118>] ? __kmalloc_node_track_caller+0x208/0x2c0 [<ffffffff815f5340>] ? rtnl_bridge_dellink+0x230/0x230 [<ffffffff815fa9a0>] ? rtnl_newlink+0x890/0x890 [<ffffffff8161cf54>] netlink_rcv_skb+0xa4/0xc0 [<ffffffff815f56f8>] rtnetlink_rcv+0x28/0x30 [<ffffffff8161c92c>] netlink_unicast+0x18c/0x240 [<ffffffff8161ccdb>] netlink_sendmsg+0x2fb/0x3a0 [<ffffffff815c5a48>] sock_sendmsg+0x38/0x50 [<ffffffff815c6031>] SYSC_sendto+0x101/0x190 [<ffffffff815c7111>] ? __sys_recvmsg+0x51/0x90 [<ffffffff815c6b6e>] SyS_sendto+0xe/0x10 [<ffffffff817017f2>] entry_SYSCALL_64_fastpath+0x1a/0xa4 The problem is that the 8021q module propagates the call to ndo_bridge_getlink() via switchdev ops, but the switch driver doesn't recognize the netdev, as it's not offloaded. While we can ignore calls being made to non-bridge ports inside the driver, a better fix would be to push this check up to the switchdev layer. Note that these ndos can be called for non-bridged netdev, but this only happens in certain PF drivers which don't call the corresponding switchdev functions anyway. Fixes: 99f44bb3527b ("mlxsw: spectrum: Enable L3 interfaces on top of bridge devices") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reported-by: Tamir Winetroub <tamirw@mellanox.com> Tested-by: Tamir Winetroub <tamirw@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-28switchdev: remove FIB offload infrastructureJiri Pirko
Since this is now taken care of by FIB notifier, remove the code, with all unused dependencies. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-28fib: introduce FIB info offload flag helpersJiri Pirko
These helpers are to be used in case someone offloads the FIB entry. The result is that if the entry is offloaded to at least one device, the offload flag is set. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-01rtnetlink: fdb dump: optimize by saving last interface markersRoopa Prabhu
fdb dumps spanning multiple skb's currently restart from the first interface again for every skb. This results in unnecessary iterations on the already visited interfaces and their fdb entries. In large scale setups, we have seen this to slow down fdb dumps considerably. On a system with 30k macs we see fdb dumps spanning across more than 300 skbs. To fix the problem, this patch replaces the existing single fdb marker with three markers: netdev hash entries, netdevs and fdb index to continue where we left off instead of restarting from the first netdev. This is consistent with link dumps. In the process of fixing the performance issue, this patch also re-implements fix done by commit 472681d57a5d ("net: ndo_fdb_dump should report -EMSGSIZE to rtnl_fdb_dump") (with an internal fix from Wilson Kok) in the following ways: - change ndo_fdb_dump handlers to return error code instead of the last fdb index - use cb->args strictly for dump frag markers and not error codes. This is consistent with other dump functions. Below results were taken on a system with 1000 netdevs and 35085 fdb entries: before patch: $time bridge fdb show | wc -l 15065 real 1m11.791s user 0m0.070s sys 1m8.395s (existing code does not return all macs) after patch: $time bridge fdb show | wc -l 35085 real 0m2.017s user 0m0.113s sys 0m1.942s Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: Wilson Kok <wkok@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-26bridge: switchdev: Add forward mark support for stacked devicesIdo Schimmel
switchdev_port_fwd_mark_set() is used to set the 'offload_fwd_mark' of port netdevs so that packets being flooded by the device won't be flooded twice. It works by assigning a unique identifier (the ifindex of the first bridge port) to bridge ports sharing the same parent ID. This prevents packets from being flooded twice by the same switch, but will flood packets through bridge ports belonging to a different switch. This method is problematic when stacked devices are taken into account, such as VLANs. In such cases, a physical port netdev can have upper devices being members in two different bridges, thus requiring two different 'offload_fwd_mark's to be configured on the port netdev, which is impossible. The main problem is that packet and netdev marking is performed at the physical netdev level, whereas flooding occurs between bridge ports, which are not necessarily port netdevs. Instead, packet and netdev marking should really be done in the bridge driver with the switch driver only telling it which packets it already forwarded. The bridge driver will mark such packets using the mark assigned to the ingress bridge port and will prevent the packet from being forwarded through any bridge port sharing the same mark (i.e. having the same parent ID). Remove the current switchdev 'offload_fwd_mark' implementation and instead implement the proposed method. In addition, make rocker - the sole user of the mark - use the proposed method. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-26switchdev: Support parent ID comparison for stacked devicesIdo Schimmel
switchdev_port_same_parent_id() currently expects port netdevs, but we need it to support stacked devices in the next patch, so drop the NO_RECURSE flag. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-15switchdev: Put export declaration in the right placeOr Gerlitz
Move exporting of switchdev_port_same_parent_id to be right below it and not elsewhere. Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Reported-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-14net/switchdev: Export the same parent ID service functionOr Gerlitz
This helper serves to know if two switchdev port netdevices belong to the same HW ASIC, e.g to figure out if forwarding offload is possible between them. Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-17switchdev: pass pointer to fib_info instead of copyJiri Pirko
The problem is that fib_info->nh is [0] so the struct fib_info allocation size depends on number of nexthops. If we just copy fib_info, we do not copy the nexthops info and driver accesses memory which is not ours. Given the fact that fib4 does not defer operations and therefore it does not need copy, just pass the pointer down to drivers as it was done before. Fixes: 850d0cbc91 ("switchdev: remove pointers from switchdev objects") Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-24switchdev: Adding complete operation to deferred switchdev opsElad Raz
When using switchdev deferred operation (SWITCHDEV_F_DEFER), the operation is executed in different context and the application doesn't have any way to get the operation real status. Adding a completion callback fixes that. This patch adds fields to switchdev_attr and switchdev_obj "complete_priv" field which is used by the "complete" callback. Application can set a complete function which will be called once the operation executed. Signed-off-by: Elad Raz <eladr@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-24switchdev: fix typo in comments/docNicolas Dichtel
Two minor typo. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-26net: ndo_fdb_dump should report -EMSGSIZE to rtnl_fdb_dump.MINOURA Makoto / 箕浦 真
When the send skbuff reaches the end, nlmsg_put and friends returns -EMSGSIZE but it is silently thrown away in ndo_fdb_dump. It is called within a for_each_netdev loop and the first fdb entry of a following netdev could fit in the remaining skbuff. This breaks the mechanism of cb->args[0] and idx to keep track of the entries that are already dumped, which results missing entries in bridge fdb show command. Signed-off-by: Minoura Makoto <minoura@valinux.co.jp> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-28switchdev: Require RTNL mutex to be held when sending FDB notificationsIdo Schimmel
When switchdev drivers process FDB notifications from the underlying device they resolve the netdev to which the entry points to and notify the bridge using the switchdev notifier. However, since the RTNL mutex is not held there is nothing preventing the netdev from disappearing in the middle, which will cause br_switchdev_event() to dereference a non-existing netdev. Make switchdev drivers hold the lock at the beginning of the notification processing session and release it once it ends, after notifying the bridge. Also, remove switchdev_mutex and fdb_lock, as they are no longer needed when RTNL mutex is held. Fixes: 03bf0c281234 ("switchdev: introduce switchdev notifier") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-10switchdev: Adding MDB entry offloadElad Raz
Define HW multicast entry: MAC and VID. Using a MAC address simplifies support for both IPV4 and IPv6. Signed-off-by: Elad Raz <eladr@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-15switchdev: Pass original device to port netdev driverIdo Schimmel
switchdev drivers need to know the netdev on which the switchdev op was invoked. For example, the STP state of a VLAN interface configured on top of a port can change while being member in a bridge. In this case, the underlying driver should only change the STP state of that particular VLAN and not of all the VLANs configured on the port. However, current switchdev infrastructure only passes the port netdev down to the driver. Solve that by passing the original device down to the driver as part of the required switchdev object / attribute. This doesn't entail any change in current switchdev drivers. It simply enables those supporting stacked devices to know the originating device and act accordingly. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-03switchdev: respect SKIP_EOPNOTSUPP flag in case there is no recursionJiri Pirko
Caller passing down the SKIP_EOPNOTSUPP switchdev flag expects that -EOPNOTSUPP cannot be returned. But in case of direct op call without recurtion, this may happen. So fix this by checking it always on the end of __switchdev_port_attr_set function. Fixes: 464314ea6c11 ("switchdev: skip over ports returning -EOPNOTSUPP when recursing ports") Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-30switchdev: fix: pass correct obj size when deferring obj addScott Feldman
Fixes: 4d429c5dd ("switchdev: introduce possibility to defer obj_add/del") Signed-off-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-30switchdev: fix: erasing too much of vlan obj when handling multiple vlan specsScott Feldman
When adding vlans with multiple IFLA_BRIDGE_VLAN_INFO attrs set in AFSPEC, we would wipe the vlan obj struct after the first IFLA_BRIDGE_VLAN_INFO. Fix this by only clearing what's necessary on each IFLA_BRIDGE_VLAN_INFO iteration. Fixes: 9e8f4a54 ("switchdev: push object ID back to object structure") Signed-off-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-30switchdev: Add support for flood controlIdo Schimmel
Allow devices supporting this feature to control the flooding of unknown unicast traffic, by making switchdev infrastructure propagate this setting to the switch driver. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-20Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts: drivers/net/usb/asix_common.c net/ipv4/inet_connection_sock.c net/switchdev/switchdev.c In the inet_connection_sock.c case the request socket hashing scheme is completely different in net-next. The other two conflicts were overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-15switchdev: assert rtnl mutex when going over lower netdevsJiri Pirko
netdev_for_each_lower_dev has to be called with rtnl mutex held. So better enforce it in switchdev functions. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-15switchdev: introduce possibility to defer obj_add/delJiri Pirko
Similar to the attr usecase, the caller knows if he is holding RTNL and is in atomic section. So let the called to decide the correct call variant. This allows drivers to sleep inside their ops and wait for hw to get the operation status. Then the status is propagated into switchdev core. This avoids silent errors in drivers. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-15switchdev: remove pointers from switchdev objectsJiri Pirko
When object is used in deferred work, we cannot use pointers in switchdev object structures because the memory they point at may be already used by someone else. So rather do local copy of the value. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Scott Feldman <sfeldma@gmail.com> Reviewed-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-15switchdev: allow caller to explicitly request attr_set as deferredJiri Pirko
Caller should know if he can call attr_set directly (when holding RTNL) or if he has to defer the att_set processing for later. This also allows drivers to sleep inside attr_set and report operation status back to switchdev core. Switchdev core then warns if status is not ok, instead of silent errors happening in drivers. Benefit from newly introduced switchdev deferred ops infrastructure. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-15switchdev: make struct switchdev_attr parameter const for attr_set callsJiri Pirko
Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-15switchdev: introduce switchdev deferred ops infrastructureJiri Pirko
Introduce infrastructure which will be used internally to defer ops. Note that the deferred ops are queued up and either are processed by scheduled work or explicitly by user calling deferred_process function. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-13switchdev: check if the vlan id is in the proper vlan rangeNikolay Aleksandrov
VLANs 0 and 4095 are reserved and shouldn't be used, add checks to switchdev similar to the bridge. Also make sure ids above 4095 cannot be passed either. Fixes: 47f8328bb1a4 ("switchdev: add new switchdev bridge setlink") Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Acked-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-13switchdev: enforce no pvid flag in vlan rangesNikolay Aleksandrov
We shouldn't allow BRIDGE_VLAN_INFO_PVID flag in VLAN ranges. Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Acked-by: Elad Raz <eladr@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>