summaryrefslogtreecommitdiff
path: root/net/sunrpc
AgeCommit message (Collapse)Author
2018-06-22Merge tag 'nfs-for-4.18-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfsLinus Torvalds
Pull NFS client bugfixes from Trond Myklebust: "Hightlights include: - fix an rcu deadlock in nfs_delegation_find_inode() - fix NFSv4 deadlocks due to not freeing the session slot in layoutget - don't send layoutreturn if the layout is already invalid - prevent duplicate XID allocation - flexfiles: Don't tie up all the rpciod threads in resends" * tag 'nfs-for-4.18-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: pNFS/flexfiles: Process writeback resends from nfsiod context as well pNFS/flexfiles: Don't tie up all the rpciod threads in resends sunrpc: Prevent duplicate XID allocation pNFS: Don't send layoutreturn if the layout is already invalid pNFS: Always free the session slot on error in nfs4_layoutget_handle_exception NFS: Fix an rcu deadlock in nfs_delegation_find_inode()
2018-06-19sunrpc: Prevent duplicate XID allocationChuck Lever
Krzysztof Kozlowski <krzk@kernel.org> reports that a heavy NFSv4 WRITE workload against a slow NFS server causes his Raspberry Pi clients to stall. Krzysztof bisected it to commit 37ac86c3a76c ("SUNRPC: Initialize rpc_rqst outside of xprt->reserve_lock") . I was able to reproduce similar behavior and it appears that rarely the RPC client layer is re-allocating an XID for an RPC that it has already partially sent. This results in the client ignoring the subsequent reply, which carries the original XID. For various reasons, checking !req->rq_xmit_bytes_sent in xprt_prepare_transmit is not a 100% reliable mechanism for determining when a fresh XID is needed. Trond's preference is to allocate the XID at the time each rpc_rqst slot is initialized. This patch should also address a gcc 4.1.2 complaint reported by Geert Uytterhoeven <geert@linux-m68k.org>. Reported-by: Krzysztof Kozlowski <krzk@kernel.org> Fixes: 37ac86c3a76c ("SUNRPC: Initialize rpc_rqst outside of ... ") Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Tested-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2018-06-12Merge tag 'overflow-v4.18-rc1-part2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull more overflow updates from Kees Cook: "The rest of the overflow changes for v4.18-rc1. This includes the explicit overflow fixes from Silvio, further struct_size() conversions from Matthew, and a bug fix from Dan. But the bulk of it is the treewide conversions to use either the 2-factor argument allocators (e.g. kmalloc(a * b, ...) into kmalloc_array(a, b, ...) or the array_size() macros (e.g. vmalloc(a * b) into vmalloc(array_size(a, b)). Coccinelle was fighting me on several fronts, so I've done a bunch of manual whitespace updates in the patches as well. Summary: - Error path bug fix for overflow tests (Dan) - Additional struct_size() conversions (Matthew, Kees) - Explicitly reported overflow fixes (Silvio, Kees) - Add missing kvcalloc() function (Kees) - Treewide conversions of allocators to use either 2-factor argument variant when available, or array_size() and array3_size() as needed (Kees)" * tag 'overflow-v4.18-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: (26 commits) treewide: Use array_size in f2fs_kvzalloc() treewide: Use array_size() in f2fs_kzalloc() treewide: Use array_size() in f2fs_kmalloc() treewide: Use array_size() in sock_kmalloc() treewide: Use array_size() in kvzalloc_node() treewide: Use array_size() in vzalloc_node() treewide: Use array_size() in vzalloc() treewide: Use array_size() in vmalloc() treewide: devm_kzalloc() -> devm_kcalloc() treewide: devm_kmalloc() -> devm_kmalloc_array() treewide: kvzalloc() -> kvcalloc() treewide: kvmalloc() -> kvmalloc_array() treewide: kzalloc_node() -> kcalloc_node() treewide: kzalloc() -> kcalloc() treewide: kmalloc() -> kmalloc_array() mm: Introduce kvcalloc() video: uvesafb: Fix integer overflow in allocation UBIFS: Fix potential integer overflow in allocation leds: Use struct_size() in allocation Convert intel uncore to struct_size ...
2018-06-12treewide: kzalloc() -> kcalloc()Kees Cook
The kzalloc() function has a 2-factor argument form, kcalloc(). This patch replaces cases of: kzalloc(a * b, gfp) with: kcalloc(a * b, gfp) as well as handling cases of: kzalloc(a * b * c, gfp) with: kzalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kzalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kzalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kzalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kzalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kzalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(char) * COUNT + COUNT , ...) | kzalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kzalloc + kcalloc ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kzalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kzalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kzalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kzalloc(C1 * C2 * C3, ...) | kzalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kzalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kzalloc(sizeof(THING) * C2, ...) | kzalloc(sizeof(TYPE) * C2, ...) | kzalloc(C1 * C2 * C3, ...) | kzalloc(C1 * C2, ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - (E1) * E2 + E1, E2 , ...) | - kzalloc + kcalloc ( - (E1) * (E2) + E1, E2 , ...) | - kzalloc + kcalloc ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-12treewide: kmalloc() -> kmalloc_array()Kees Cook
The kmalloc() function has a 2-factor argument form, kmalloc_array(). This patch replaces cases of: kmalloc(a * b, gfp) with: kmalloc_array(a * b, gfp) as well as handling cases of: kmalloc(a * b * c, gfp) with: kmalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kmalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kmalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The tools/ directory was manually excluded, since it has its own implementation of kmalloc(). The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kmalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kmalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kmalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(u8) * COUNT + COUNT , ...) | kmalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kmalloc( - sizeof(char) * COUNT + COUNT , ...) | kmalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kmalloc + kmalloc_array ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kmalloc + kmalloc_array ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kmalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kmalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kmalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kmalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kmalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kmalloc(C1 * C2 * C3, ...) | kmalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kmalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kmalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kmalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kmalloc(sizeof(THING) * C2, ...) | kmalloc(sizeof(TYPE) * C2, ...) | kmalloc(C1 * C2 * C3, ...) | kmalloc(C1 * C2, ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - (E1) * E2 + E1, E2 , ...) | - kmalloc + kmalloc_array ( - (E1) * (E2) + E1, E2 , ...) | - kmalloc + kmalloc_array ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-12Merge tag 'nfs-for-4.18-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfsLinus Torvalds
Pull NFS client updates from Trond Myklebust: "Highlights include: Stable fixes: - Fix a 1-byte stack overflow in nfs_idmap_read_and_verify_message - Fix a hang due to incorrect error returns in rpcrdma_convert_iovs() - Revert an incorrect change to the NFSv4.1 callback channel - Fix a bug in the NFSv4.1 sequence error handling Features and optimisations: - Support for piggybacking a LAYOUTGET operation to the OPEN compound - RDMA performance enhancements to deal with transport congestion - Add proper SPDX tags for NetApp-contributed RDMA source - Do not request delegated file attributes (size+change) from the server - Optimise away a GETATTR in the lookup revalidate code when doing NFSv4 OPEN - Optimise away unnecessary lookups for rename targets - Misc performance improvements when freeing NFSv4 delegations Bugfixes and cleanups: - Try to fail quickly if proto=rdma - Clean up RDMA receive trace points - Fix sillyrename to return the delegation when appropriate - Misc attribute revalidation fixes - Immediately clear the pNFS layout on a file when the server returns ESTALE - Return NFS4ERR_DELAY when delegation/layout recalls fail due to igrab() - Fix the client behaviour on NFS4ERR_SEQ_FALSE_RETRY" * tag 'nfs-for-4.18-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: (80 commits) skip LAYOUTRETURN if layout is invalid NFSv4.1: Fix the client behaviour on NFS4ERR_SEQ_FALSE_RETRY NFSv4: Fix a typo in nfs41_sequence_process NFSv4: Revert commit 5f83d86cf531d ("NFSv4.x: Fix wraparound issues..") NFSv4: Return NFS4ERR_DELAY when a layout recall fails due to igrab() NFSv4: Return NFS4ERR_DELAY when a delegation recall fails due to igrab() NFSv4.0: Remove transport protocol name from non-UCS client ID NFSv4.0: Remove cl_ipaddr from non-UCS client ID NFSv4: Fix a compiler warning when CONFIG_NFS_V4_1 is undefined NFS: Filter cache invalidation when holding a delegation NFS: Ignore NFS_INO_REVAL_FORCED in nfs_check_inode_attributes() NFS: Improve caching while holding a delegation NFS: Fix attribute revalidation NFS: fix up nfs_setattr_update_inode NFSv4: Ensure the inode is clean when we set a delegation NFSv4: Ignore NFS_INO_REVAL_FORCED in nfs4_proc_access NFSv4: Don't ask for delegated attributes when adding a hard link NFSv4: Don't ask for delegated attributes when revalidating the inode NFS: Pass the inode down to the getattr() callback NFSv4: Don't request size+change attribute if they are delegated to us ...
2018-06-12Merge tag 'nfsd-4.18' of git://linux-nfs.org/~bfields/linuxLinus Torvalds
Pull nfsd updates from Bruce Fields: "A relatively quiet cycle for nfsd. The largest piece is an RDMA update from Chuck Lever with new trace points, miscellaneous cleanups, and streamlining of the send and receive paths. Other than that, some miscellaneous bugfixes" * tag 'nfsd-4.18' of git://linux-nfs.org/~bfields/linux: (26 commits) nfsd: fix error handling in nfs4_set_delegation() nfsd: fix potential use-after-free in nfsd4_decode_getdeviceinfo Fix 16-byte memory leak in gssp_accept_sec_context_upcall svcrdma: Fix incorrect return value/type in svc_rdma_post_recvs svcrdma: Remove unused svc_rdma_op_ctxt svcrdma: Persistently allocate and DMA-map Send buffers svcrdma: Simplify svc_rdma_send() svcrdma: Remove post_send_wr svcrdma: Don't overrun the SGE array in svc_rdma_send_ctxt svcrdma: Introduce svc_rdma_send_ctxt svcrdma: Clean up Send SGE accounting svcrdma: Refactor svc_rdma_dma_map_buf svcrdma: Allocate recv_ctxt's on CPU handling Receives svcrdma: Persistently allocate and DMA-map Receive buffers svcrdma: Preserve Receive buffer until svc_rdma_sendto svcrdma: Simplify svc_rdma_recv_ctxt_put svcrdma: Remove sc_rq_depth svcrdma: Introduce svc_rdma_recv_ctxt svcrdma: Trace key RDMA API events svcrdma: Trace key RPC/RDMA protocol events ...
2018-06-08Fix 16-byte memory leak in gssp_accept_sec_context_upcallDave Wysochanski
There is a 16-byte memory leak inside sunrpc/auth_gss on an nfs server when a client mounts with 'sec=krb5' in a simple mount / umount loop. The leak is seen by either monitoring the kmalloc-16 slab or with kmemleak enabled unreferenced object 0xffff92e6a045f030 (size 16): comm "nfsd", pid 1096, jiffies 4294936658 (age 761.110s) hex dump (first 16 bytes): 2a 86 48 86 f7 12 01 02 02 00 00 00 00 00 00 00 *.H............. backtrace: [<000000004b2b79a7>] gssx_dec_buffer+0x79/0x90 [auth_rpcgss] [<000000002610ac1a>] gssx_dec_accept_sec_context+0x215/0x6dd [auth_rpcgss] [<000000004fd0e81d>] rpcauth_unwrap_resp+0xa9/0xe0 [sunrpc] [<000000002b099233>] call_decode+0x1e9/0x840 [sunrpc] [<00000000954fc846>] __rpc_execute+0x80/0x3f0 [sunrpc] [<00000000c83a961c>] rpc_run_task+0x10d/0x150 [sunrpc] [<000000002c2cdcd2>] rpc_call_sync+0x4d/0xa0 [sunrpc] [<000000000b74eea2>] gssp_accept_sec_context_upcall+0x196/0x470 [auth_rpcgss] [<000000003271273f>] svcauth_gss_proxy_init+0x188/0x520 [auth_rpcgss] [<000000001cf69f01>] svcauth_gss_accept+0x3a6/0xb50 [auth_rpcgss] If you map the above to code you'll see the following call chain gssx_dec_accept_sec_context gssx_dec_ctx (missing from kmemleak output) gssx_dec_buffer(xdr, &ctx->mech) Inside gssx_dec_buffer there is 'kmemdup' where we allocate memory for any gssx_buffer (buf) and store into buf->data. In the above instance, 'buf == &ctx->mech). Further up in the chain in gssp_accept_sec_context_upcall we see ctx->mech is part of a stack variable 'struct gssx_ctx rctxh'. Now later inside gssp_accept_sec_context_upcall after gssp_call, there is a number of memcpy and kfree statements, but there is no kfree(rctxh.mech.data) after the memcpy into data->mech_oid.data. With this patch applied and the same mount / unmount loop, the kmalloc-16 slab is stable and kmemleak enabled no longer shows the above backtrace. Signed-off-by: Dave Wysochanski <dwysocha@redhat.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2018-06-08svcrdma: Fix incorrect return value/type in svc_rdma_post_recvsChuck Lever
This crept in during the development process and wasn't caught before I posted the "final" version. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Fixes: 0b2613c5883f ('svcrdma: Allocate recv_ctxt's on CPU ... ') Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2018-06-04Merge tag 'nfs-rdma-for-4.18-1' of ↵Trond Myklebust
git://git.linux-nfs.org/projects/anna/linux-nfs NFS-over-RDMA client updates for Linux 4.18 Stable patches: - xprtrdma: Return -ENOBUFS when no pages are available New features: - Add ->alloc_slot() and ->free_slot() functions Bugfixes and cleanups: - Add missing SPDX tags to some files - Try to fail mount quickly if client has no RDMA devices - Create transport IDs in the correct network namespace - Fix max_send_wr computation - Clean up receive tracepoints - Refactor receive handling - Remove unused functions
2018-06-04Merge branch 'work.misc' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull misc vfs updates from Al Viro: "Misc bits and pieces not fitting into anything more specific" * 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: vfs: delete unnecessary assignment in vfs_listxattr Documentation: filesystems: update filesystem locking documentation vfs: namei: use path_equal() in follow_dotdot() fs.h: fix outdated comment about file flags __inode_security_revalidate() never gets NULL opt_dentry make xattr_getsecurity() static vfat: simplify checks in vfat_lookup() get rid of dead code in d_find_alias() it's SB_BORN, not MS_BORN... msdos_rmdir(): kill BS comment remove rpc_rmdir() fs: avoid fdput() after failed fdget() in vfs_dedupe_file_range()
2018-06-02Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdmaLinus Torvalds
Pull rdma fixes from Jason Gunthorpe: "Just three small last minute regressions that were found in the last week. The Broadcom fix is a bit big for rc7, but since it is fixing driver crash regressions that were merged via netdev into rc1, I am sending it. - bnxt netdev changes merged this cycle caused the bnxt RDMA driver to crash under certain situations - Arnd found (several, unfortunately) kconfig problems with the patches adding INFINIBAND_ADDR_TRANS. Reverting this last part, will fix it more fully outside -rc. - Subtle change in error code for a uapi function caused breakage in userspace. This was bug was subtly introduced cycle" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: IB/core: Fix error code for invalid GID entry IB: Revert "remove redundant INFINIBAND kconfig dependencies" RDMA/bnxt_re: Fix broken RoCE driver due to recent L2 driver changes
2018-06-01xprtrdma: Remove transfertypes arrayChuck Lever
Clean up: This array was used in a dprintk that was replaced by a trace point in commit ab03eff58eb5 ("xprtrdma: Add trace points in RPC Call transmit paths"). Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2018-06-01xprtrdma: Add trace_xprtrdma_dma_map(mr)Chuck Lever
Matches trace_xprtrdma_dma_unmap(mr). Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2018-06-01xprtrdma: Wait on empty sendctx queueChuck Lever
Currently, when the sendctx queue is exhausted during marshaling, the RPC/RDMA transport places the RPC task on the delayq, which forces a wait for HZ >> 2 before the marshal and send is retried. With this change, the transport now places such an RPC task on the pending queue, and wakes it just as soon as more sendctxs become available. This typically takes less than a millisecond, and the write_space waking mechanism is less deadlock-prone. Moreover, the waiting RPC task is holding the transport's write lock, which blocks the transport from sending RPCs. Therefore faster recovery from sendctx queue exhaustion is desirable. Cf. commit 5804891455d5 ("xprtrdma: ->send_request returns -EAGAIN when there are no free MRs"). Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2018-06-01xprtrdma: Move common wait_for_buffer_space call to parent functionChuck Lever
Clean up: The logic to wait for write space is common to a bunch of the encoding helper functions. Lift it out and put it in the tail of rpcrdma_marshal_req(). Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2018-06-01xprtrdma: Return -ENOBUFS when no pages are availableChuck Lever
The use of -EAGAIN in rpcrdma_convert_iovs() is a latent bug: the transport never calls xprt_write_space() when more pages become available. -ENOBUFS will trigger the correct "delay briefly and call again" logic. Fixes: 7a89f9c626e3 ("xprtrdma: Honor ->send_request API contract") Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Cc: stable@vger.kernel.org # 4.8+ Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2018-05-28IB: Revert "remove redundant INFINIBAND kconfig dependencies"Arnd Bergmann
Several subsystems depend on INFINIBAND_ADDR_TRANS, which in turn depends on INFINIBAND. However, when with CONFIG_INIFIBAND=m, this leads to a link error when another driver using it is built-in. The INFINIBAND_ADDR_TRANS dependency is insufficient here as this is a 'bool' symbol that does not force anything to be a module in turn. fs/cifs/smbdirect.o: In function `smbd_disconnect_rdma_work': smbdirect.c:(.text+0x1e4): undefined reference to `rdma_disconnect' net/9p/trans_rdma.o: In function `rdma_request': trans_rdma.c:(.text+0x7bc): undefined reference to `rdma_disconnect' net/9p/trans_rdma.o: In function `rdma_destroy_trans': trans_rdma.c:(.text+0x830): undefined reference to `ib_destroy_qp' trans_rdma.c:(.text+0x858): undefined reference to `ib_dealloc_pd' Fixes: 9533b292a7ac ("IB: remove redundant INFINIBAND kconfig dependencies") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Greg Thelen <gthelen@google.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-05-24Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdmaLinus Torvalds
Pull rdma fixes from Jason Gunthorpe: "This is pretty much just the usual array of smallish driver bugs. - remove bouncing addresses from the MAINTAINERS file - kernel oops and bad error handling fixes for hfi, i40iw, cxgb4, and hns drivers - various small LOC behavioral/operational bugs in mlx5, hns, qedr and i40iw drivers - two fixes for patches already sent during the merge window - a long-standing bug related to not decreasing the pinned pages count in the right MM was found and fixed" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (28 commits) RDMA/hns: Move the location for initializing tmp_len RDMA/hns: Bugfix for cq record db for kernel IB/uverbs: Fix uverbs_attr_get_obj RDMA/qedr: Fix doorbell bar mapping for dpi > 1 IB/umem: Use the correct mm during ib_umem_release iw_cxgb4: Fix an error handling path in 'c4iw_get_dma_mr()' RDMA/i40iw: Avoid panic when reading back the IRQ affinity hint RDMA/i40iw: Avoid reference leaks when processing the AEQ RDMA/i40iw: Avoid panic when objects are being created and destroyed RDMA/hns: Fix the bug with NULL pointer RDMA/hns: Set NULL for __internal_mr RDMA/hns: Enable inner_pa_vld filed of mpt RDMA/hns: Set desc_dma_addr for zero when free cmq desc RDMA/hns: Fix the bug with rq sge RDMA/hns: Not support qp transition from reset to reset for hip06 RDMA/hns: Add return operation when configured global param fail RDMA/hns: Update convert function of endian format RDMA/hns: Load the RoCE dirver automatically RDMA/hns: Bugfix for rq record db for kernel RDMA/hns: Add rq inline flags judgement ...
2018-05-11Merge tag 'nfs-for-4.17-2' of git://git.linux-nfs.org/projects/anna/linux-nfsLinus Torvalds
Pull NFS client fixes from Anna Schumaker: "These patches fix both a possible corruption during NFSoRDMA MR recovery, and a sunrpc tracepoint crash. Additionally, Trond has a new email address to put in the MAINTAINERS file" * tag 'nfs-for-4.17-2' of git://git.linux-nfs.org/projects/anna/linux-nfs: Change Trond's email address in MAINTAINERS sunrpc: Fix latency trace point crashes xprtrdma: Fix list corruption / DMAR errors during MR recovery
2018-05-11svcrdma: Persistently allocate and DMA-map Send buffersChuck Lever
While sending each RPC Reply, svc_rdma_sendto allocates and DMA- maps a separate buffer where the RPC/RDMA transport header is constructed. The buffer is unmapped and released in the Send completion handler. This is significant per-RPC overhead, especially for small RPCs. Instead, allocate and DMA-map a buffer, and cache it in each svc_rdma_send_ctxt. This buffer and its mapping can be re-used for each RPC, saving the cost of memory allocation and DMA mapping. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2018-05-11svcrdma: Simplify svc_rdma_send()Chuck Lever
Clean up: No current caller of svc_rdma_send's passes in a chained WR. The logic that counts the chain length can be replaced with a constant (1). Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2018-05-11svcrdma: Remove post_send_wrChuck Lever
Clean up: Now that the send_wr is part of the svc_rdma_send_ctxt, svc_rdma_post_send_wr is nearly empty. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2018-05-11svcrdma: Don't overrun the SGE array in svc_rdma_send_ctxtChuck Lever
Receive buffers are always the same size, but each Send WR has a variable number of SGEs, based on the contents of the xdr_buf being sent. While assembling a Send WR, keep track of the number of SGEs so that we don't exceed the device's maximum, or walk off the end of the Send SGE array. For now the Send path just fails if it exceeds the maximum. The current logic in svc_rdma_accept bases the maximum number of Send SGEs on the largest NFS request that can be sent or received. In the transport layer, the limit is actually based on the capabilities of the underlying device, not on properties of the Upper Layer Protocol. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2018-05-11svcrdma: Introduce svc_rdma_send_ctxtChuck Lever
svc_rdma_op_ctxt's are pre-allocated and maintained on a per-xprt free list. This eliminates the overhead of calling kmalloc / kfree, both of which grab a globally shared lock that disables interrupts. Introduce a replacement to svc_rdma_op_ctxt's that is built especially for the svcrdma Send path. Subsequent patches will take advantage of this new structure by allocating real resources which are then cached in these objects. The allocations are freed when the transport is torn down. I've renamed the structure so that static type checking can be used to ensure that uses of op_ctxt and send_ctxt are not confused. As an additional clean up, structure fields are renamed to conform with kernel coding conventions. Additional clean ups: - Handle svc_rdma_send_ctxt_get allocation failure at each call site, rather than pre-allocating and hoping we guessed correctly - All send_ctxt_put call-sites request page freeing, so remove the @free_pages argument - All send_ctxt_put call-sites unmap SGEs, so fold that into svc_rdma_send_ctxt_put Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2018-05-11svcrdma: Clean up Send SGE accountingChuck Lever
Clean up: Since there's already a svc_rdma_op_ctxt being passed around with the running count of mapped SGEs, drop unneeded parameters to svc_rdma_post_send_wr(). Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2018-05-11svcrdma: Refactor svc_rdma_dma_map_bufChuck Lever
Clean up: svc_rdma_dma_map_buf does mostly the same thing as svc_rdma_dma_map_page, so let's fold these together. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2018-05-11svcrdma: Allocate recv_ctxt's on CPU handling ReceivesChuck Lever
There is a significant latency penalty when processing an ingress Receive if the Receive buffer resides in memory that is not on the same NUMA node as the the CPU handling completions for a CQ. The system administrator and the device driver determine which CPU handles completions. This CPU does not change during life of the CQ. Further the Upper Layer does not have any visibility of which CPU it is. Allocating Receive buffers in the Receive completion handler guarantees that Receive buffers are allocated on the preferred NUMA node for that CQ. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2018-05-11svcrdma: Persistently allocate and DMA-map Receive buffersChuck Lever
The current Receive path uses an array of pages which are allocated and DMA mapped when each Receive WR is posted, and then handed off to the upper layer in rqstp::rq_arg. The page flip releases unused pages in the rq_pages pagelist. This mechanism introduces a significant amount of overhead. So instead, kmalloc the Receive buffer, and leave it DMA-mapped while the transport remains connected. This confers a number of benefits: * Each Receive WR requires only one receive SGE, no matter how large the inline threshold is. This helps the server-side NFS/RDMA transport operate on less capable RDMA devices. * The Receive buffer is left allocated and mapped all the time. This relieves svc_rdma_post_recv from the overhead of allocating and DMA-mapping a fresh buffer. * svc_rdma_wc_receive no longer has to DMA unmap the Receive buffer. It has to DMA sync only the number of bytes that were received. * svc_rdma_build_arg_xdr no longer has to free a page in rq_pages for each page in the Receive buffer, making it a constant-time function. * The Receive buffer is now plugged directly into the rq_arg's head[0].iov_vec, and can be larger than a page without spilling over into rq_arg's page list. This enables simplification of the RDMA Read path in subsequent patches. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2018-05-11svcrdma: Preserve Receive buffer until svc_rdma_sendtoChuck Lever
Rather than releasing the incoming svc_rdma_recv_ctxt at the end of svc_rdma_recvfrom, hold onto it until svc_rdma_sendto. This permits the contents of the Receive buffer to be preserved through svc_process and then referenced directly in sendto as it constructs Write and Reply chunks to return to the client. The real changes will come in subsequent patches. Note: I cannot use ->xpo_release_rqst for this purpose because that is called _before_ ->xpo_sendto. svc_rdma_sendto uses information in the received Call transport header to construct the Reply transport header, which is preserved in the RPC's Receive buffer. The historical comment in svc_send() isn't helpful: it is already obvious that ->xpo_release_rqst is being called before ->xpo_sendto, but there is no explanation for this ordering going back to the beginning of the git era. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2018-05-11svcrdma: Simplify svc_rdma_recv_ctxt_putChuck Lever
Currently svc_rdma_recv_ctxt_put's callers have to know whether they want to free the ctxt's pages or not. This means the human developers have to know when and why to set that free_pages argument. Instead, the ctxt should carry that information with it so that svc_rdma_recv_ctxt_put does the right thing no matter who is calling. We want to keep track of the number of pages in the Receive buffer separately from the number of pages pulled over by RDMA Read. This is so that the correct number of pages can be freed properly and that number is well-documented. So now, rc_hdr_count is the number of pages consumed by head[0] (ie., the page index where the Read chunk should start); and rc_page_count is always the number of pages that need to be released when the ctxt is put. The @free_pages argument is no longer needed. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2018-05-11svcrdma: Remove sc_rq_depthChuck Lever
Clean up: No need to retain rq_depth in struct svcrdma_xprt, it is used only in svc_rdma_accept(). Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2018-05-11svcrdma: Introduce svc_rdma_recv_ctxtChuck Lever
svc_rdma_op_ctxt's are pre-allocated and maintained on a per-xprt free list. This eliminates the overhead of calling kmalloc / kfree, both of which grab a globally shared lock that disables interrupts. To reduce contention further, separate the use of these objects in the Receive and Send paths in svcrdma. Subsequent patches will take advantage of this separation by allocating real resources which are then cached in these objects. The allocations are freed when the transport is torn down. I've renamed the structure so that static type checking can be used to ensure that uses of op_ctxt and recv_ctxt are not confused. As an additional clean up, structure fields are renamed to conform with kernel coding conventions. As a final clean up, helpers related to recv_ctxt are moved closer to the functions that use them. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2018-05-11svcrdma: Trace key RDMA API eventsChuck Lever
This includes: * Posting on the Send and Receive queues * Send, Receive, Read, and Write completion * Connect upcalls * QP errors Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2018-05-11svcrdma: Trace key RPC/RDMA protocol eventsChuck Lever
This includes: * Transport accept and tear-down * Decisions about using Write and Reply chunks * Each RDMA segment that is handled * Whenever an RDMA_ERR is sent As a clean-up, I've standardized the order of the includes, and removed some now redundant dprintk call sites. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2018-05-11xprtrdma: Prepare RPC/RDMA includes for server-side trace pointsChuck Lever
Clean up: Move #include <trace/events/rpcrdma.h> into source files, similar to how it is done with trace/events/sunrpc.h. Server-side trace points will be part of the rpcrdma subsystem, just like the client-side trace points. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2018-05-11svcrdma: Use passed-in net namespace when creating RDMA listenerChuck Lever
Ensure each RDMA listener and its children transports are created in the same net namespace as the user that started the NFS service. This is similar to how listener sockets are created in svc_create_socket, required for enabling support for containers. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2018-05-11svcrdma: Add proper SPDX tags for NetApp-contributed sourceChuck Lever
Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2018-05-09IB: remove redundant INFINIBAND kconfig dependenciesGreg Thelen
INFINIBAND_ADDR_TRANS depends on INFINIBAND. So there's no need for options which depend INFINIBAND_ADDR_TRANS to also depend on INFINIBAND. Remove the unnecessary INFINIBAND depends. Signed-off-by: Greg Thelen <gthelen@google.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-05-07xprtrdma: Make rpcrdma_sendctx_put_locked() a static functionChuck Lever
Clean up: The only call site is in the same file as the function's definition. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2018-05-07xprtrdma: Remove rpcrdma_buffer_get_rep_locked()Chuck Lever
Clean up: There is only one remaining call site for this helper. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2018-05-07xprtrdma: Remove rpcrdma_buffer_get_req_locked()Chuck Lever
Clean up. There is only one call-site for this helper, and it can be simplified by using list_first_entry_or_null(). Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2018-05-07xprtrdma: Remove rpcrdma_ep_{post_recv, post_extra_recv}Chuck Lever
Clean up: These functions are no longer used. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2018-05-07xprtrdma: Move Receive posting to Receive handlerChuck Lever
Receive completion and Reply handling are done by a BOUND workqueue, meaning they run on only one CPU. Posting receives is currently done in the send_request path, which on large systems is typically done on a different CPU than the one handling Receive completions. This results in movement of Receive-related cachelines between the sending and receiving CPUs. More importantly, it means that currently Receives are posted while the transport's write lock is held, which is unnecessary and costly. Finally, allocation of Receive buffers is performed on-demand in the Receive completion handler. This helps guarantee that they are allocated on the same NUMA node as the CPU that handles Receive completions. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2018-05-07xprtrdma: Clean up Receive trace pointsChuck Lever
For clarity, report the posting and completion of Receive CQEs. Also, the wc->byte_len field contains garbage if wc->status is non-zero, and the vendor error field contains garbage if wc->status is zero. For readability, don't save those fields in those cases. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2018-05-07xprtrdma: Make rpc_rqst part of rpcrdma_reqChuck Lever
This simplifies allocation of the generic RPC slot and xprtrdma specific per-RPC resources. It also makes xprtrdma more like the socket-based transports: ->buf_alloc and ->buf_free are now responsible only for send and receive buffers. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2018-05-07xprtrdma: Introduce ->alloc_slot call-out for xprtrdmaChuck Lever
rpcrdma_buffer_get acquires an rpcrdma_req and rep for each RPC. Currently this is done in the call_allocate action, and sometimes it can fail if there are many outstanding RPCs. When call_allocate fails, the RPC task is put on the delayq. It is awoken a few milliseconds later, but there's no guarantee it will get a buffer at that time. The RPC task can be repeatedly put back to sleep or even starved. The call_allocate action should rarely fail. The delayq mechanism is not meant to deal with transport congestion. In the current sunrpc stack, there is a friendlier way to deal with this situation. These objects are actually tantamount to an RPC slot (rpc_rqst) and there is a separate FSM action, distinct from call_allocate, for allocating slot resources. This is the call_reserve action. When allocation fails during this action, the RPC is placed on the transport's backlog queue. The backlog mechanism provides a stronger guarantee that when the RPC is awoken, a buffer will be available for it; and backlogged RPCs are awoken one-at-a-time. To make slot resource allocation occur in the call_reserve action, create special ->alloc_slot and ->free_slot call-outs for xprtrdma. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2018-05-07SUNRPC: Add a ->free_slot transport calloutChuck Lever
Refactor: xprtrdma needs to have better control over when RPCs are awoken from the backlog queue, so replace xprt_free_slot with a transport op callout. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2018-05-07SUNRPC: Initialize rpc_rqst outside of xprt->reserve_lockChuck Lever
alloc_slot is a transport-specific op, but initializing an rpc_rqst is common to all transports. In addition, the only part of initial- izing an rpc_rqst that needs serialization is getting a fresh XID. Move rpc_rqst initialization to common code in preparation for adding a transport-specific alloc_slot to xprtrdma. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2018-05-07xprtrdma: Fix max_send_wr computationChuck Lever
For FRWR, the computation of max_send_wr is split between frwr_op_open and rpcrdma_ep_create, which makes it difficult to tell that the max_send_wr result is currently incorrect if frwr_op_open has to reduce the credit limit to accommodate a small max_qp_wr. This is a problem now that extra WRs are needed for backchannel operations and a drain CQE. So, refactor the computation so that it is all done in ->ro_open, and fix the FRWR version of this computation so that it accommodates HCAs with small max_qp_wr correctly. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-03 12:24:31 +0000