| Age | Commit message (Collapse) | Author |
|---|
|
Re-arrange the pointer arithmetic in the chunk list encoders to
eliminate several more integer multiplication instructions during
Transport Header encoding.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
Re-arrange the pointer arithmetic in rpcrdma_convert_iovs() to
eliminate several integer multiplication instructions during
Transport Header encoding.
Also, array overflow does not occur outside development
environments, so replace overflow checking with one spot check
at the end. This reduces the number of conditional branches in
the common case.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
Same changes as in rpcrdma_marshal_req(). This removes
C-structure style encoding from the backchannel.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
While marshaling chunk lists which are variable-length XDR objects,
check for XDR buffer overflow at every step. Measurements show no
significant changes in CPU utilization.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
Initialize an xdr_stream at the top of rpcrdma_marshal_req(), and
use it to encode the fixed transport header fields. This xdr_stream
will be used to encode the chunk lists in a subsequent patch.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
Clean up: Remove a variable whose result is no longer used.
Commit 655fec6987be ("xprtrdma: Use gathered Send for large inline
messages") should have removed it.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
Clean up: The caller already has rpcrdma_xprt, so pass that directly
instead. And provide a documenting comment for this critical
function.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
Clean up: Replace C-structure based XDR decoding for consistency
with other areas.
struct rpcrdma_rep is rearranged slightly so that the relevant fields
are in cache when the Receive completion handler is invoked.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
This field is no longer used outside the Receive completion handler.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
Clean up: The opcode check is no longer necessary, because since
commit 2fa8f88d8892 ("xprtrdma: Use new CQ API for RPC-over-RDMA
client send CQs"), this completion handler is invoked only for
RECV work requests.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
Clean up chunk list decoding by using the xdr_stream set up in
rpcrdma_reply_handler. This hardens decoding by checking for buffer
overflow at every step while unmarshaling variable-length XDR
objects.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
Refactor the reply handler's transport header decoding logic to make
it easier to understand and update.
Convert some of the handler to use xdr_streams, which will enable
stricter validation of input data and enable the eventual addition
of support for new combinations of chunks, such as "Write + Reply"
or "PZRC + normal Read".
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
Transport header decoding deals with untrusted input data, therefore
decoding this header needs to be hardened.
Adopt the same infrastructure that is used when XDR decoding NFS
replies. This is slightly more CPU-intensive than the replaced code,
but we're not adding new atomics, locking, or context switches. The
cost is manageable.
Start by initializing an xdr_stream in rpcrdma_reply_handler().
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
After transport instance creation, these function pointers never
change. Mark them as constant to prevent their use as an attack
vector for code injections.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
Pull NFS client updates from Anna Schumaker:
"Stable bugfixes:
- Fix -EACCESS on commit to DS handling
- Fix initialization of nfs_page_array->npages
- Only invalidate dentries that are actually invalid
Features:
- Enable NFSoRDMA transparent state migration
- Add support for lookup-by-filehandle
- Add support for nfs re-exporting
Other bugfixes and cleanups:
- Christoph cleaned up the way we declare NFS operations
- Clean up various internal structures
- Various cleanups to commits
- Various improvements to error handling
- Set the dt_type of . and .. entries in NFS v4
- Make slot allocation more reliable
- Fix fscache stat printing
- Fix uninitialized variable warnings
- Fix potential list overrun in nfs_atomic_open()
- Fix a race in NFSoRDMA RPC reply handler
- Fix return size for nfs42_proc_copy()
- Fix against MAC forgery timing attacks"
* tag 'nfs-for-4.13-1' of git://git.linux-nfs.org/projects/anna/linux-nfs: (68 commits)
NFS: Don't run wake_up_bit() when nobody is waiting...
nfs: add export operations
nfs4: add NFSv4 LOOKUPP handlers
nfs: add a nfs_ilookup helper
nfs: replace d_add with d_splice_alias in atomic_open
sunrpc: use constant time memory comparison for mac
NFSv4.2 fix size storage for nfs42_proc_copy
xprtrdma: Fix documenting comments in frwr_ops.c
xprtrdma: Replace PAGE_MASK with offset_in_page()
xprtrdma: FMR does not need list_del_init()
xprtrdma: Demote "connect" log messages
NFSv4.1: Use seqid returned by EXCHANGE_ID after state migration
NFSv4.1: Handle EXCHGID4_FLAG_CONFIRMED_R during NFSv4.1 migration
xprtrdma: Don't defer MR recovery if ro_map fails
xprtrdma: Fix FRWR invalidation error recovery
xprtrdma: Fix client lock-up after application signal fires
xprtrdma: Rename rpcrdma_req::rl_free
xprtrdma: Pass only the list of registered MRs to ro_unmap_sync
xprtrdma: Pre-mark remotely invalidated MRs
xprtrdma: On invalidation failure, remove MWs from rl_registered
...
|
|
Clean up.
FASTREG and LOCAL_INV WRs are typically not signaled. localinv_wake
is used for the last LOCAL_INV WR in a chain, which is always
signaled. The documenting comments should reflect that.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
Clean up.
Reported by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
Clean up.
Commit 38f1932e60ba ("xprtrdma: Remove FMRs from the unmap list
after unmapping") utilized list_del_init() to try to prevent some
list corruption. The corruption was actually caused by the reply
handler racing with a signal. Now that MR invalidation is properly
serialized, list_del_init() can safely be replaced.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
Some have complained about the log messages generated when xprtrdma
opens or closes a connection to a server. When an NFS mount is
mostly idle these can appear every few minutes as the client idles
out the connection and reconnects.
Connection and disconnection is a normal part of operation, and not
exceptional, so change these to dprintk's for now. At some point
all of these will be converted to tracepoints, but that's for
another day.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
Deferred MR recovery does a DMA-unmapping of the MW. However, ro_map
invokes rpcrdma_defer_mr_recovery in some error cases where the MW
has not even been DMA-mapped yet.
Avoid a DMA-unmapping error replacing rpcrdma_defer_mr_recovery.
Also note that if ib_dma_map_sg is asked to map 0 nents, it will
return 0. So the extra "if (i == 0)" check is no longer needed.
Fixes: 42fe28f60763 ("xprtrdma: Do not leak an MW during a DMA ...")
Fixes: 505bbe64dd04 ("xprtrdma: Refactor MR recovery work queues")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
When ib_post_send() fails, all LOCAL_INV WRs past @bad_wr have to be
examined, and the MRs reset by hand.
I'm not sure how the existing code can work by comparing R_keys.
Restructure the logic so that instead it walks the chain of WRs,
starting from the first bad one.
Make sure to wait for completion if at least one WR was actually
posted. Otherwise, if the ib_post_send fails, we can end up
DMA-unmapping the MR while LOCAL_INV operations are in flight.
Commit 7a89f9c626e3 ("xprtrdma: Honor ->send_request API contract")
added the rdma_disconnect() call site. The disconnect actually
causes more problems than it solves, and SQ overruns happen only as
a result of software bugs. So remove it.
Fixes: d7a21c1bed54 ("xprtrdma: Reset MRs in frwr_op_unmap_sync()")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
After a signal, the RPC client aborts synchronous RPCs running on
behalf of the signaled application.
The server is still executing those RPCs, and will write the results
back into the client's memory when it's done. By the time the server
writes the results, that memory is likely being used for other
purposes. Therefore xprtrdma has to immediately invalidate all
memory regions used by those aborted RPCs to prevent the server's
writes from clobbering that re-used memory.
With FMR memory registration, invalidation takes a relatively long
time. In fact, the invalidation is often still running when the
server tries to write the results into the memory regions that are
being invalidated.
This sets up a race between two processes:
1. After the signal, xprt_rdma_free calls ro_unmap_safe.
2. While ro_unmap_safe is still running, the server replies and
rpcrdma_reply_handler runs, calling ro_unmap_sync.
Both processes invoke ib_unmap_fmr on the same FMR.
The mlx4 driver allows two ib_unmap_fmr calls on the same FMR at
the same time, but HCAs generally don't tolerate this. Sometimes
this can result in a system crash.
If the HCA happens to survive, rpcrdma_reply_handler continues. It
removes the rpc_rqst from rq_list and releases the transport_lock.
This enables xprt_rdma_free to run in another process, and the
rpc_rqst is released while rpcrdma_reply_handler is still waiting
for the ib_unmap_fmr call to finish.
But further down in rpcrdma_reply_handler, the transport_lock is
taken again, and "rqst" is dereferenced. If "rqst" has already been
released, this triggers a general protection fault. Since bottom-
halves are disabled, the system locks up.
Address both issues by reversing the order of the xprt_lookup_rqst
call and the ro_unmap_sync call. Introduce a separate lookup
mechanism for rpcrdma_req's to enable calling ro_unmap_sync before
xprt_lookup_rqst. Now the handler takes the transport_lock once
and holds it for the XID lookup and RPC completion.
BugLink: https://bugzilla.linux-nfs.org/show_bug.cgi?id=305
Fixes: 68791649a725 ('xprtrdma: Invalidate in the RPC reply ... ')
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
Clean up: I'm about to use the rl_free field for purposes other than
a free list. So use a more generic name.
This is a refactoring change only.
BugLink: https://bugzilla.linux-nfs.org/show_bug.cgi?id=305
Fixes: 68791649a725 ('xprtrdma: Invalidate in the RPC reply ... ')
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
There are rare cases where an rpcrdma_req can be re-used (via
rpcrdma_buffer_put) while the RPC reply handler is still running.
This is due to a signal firing at just the wrong instant.
Since commit 9d6b04097882 ("xprtrdma: Place registered MWs on a
per-req list"), rpcrdma_mws are self-contained; ie., they fully
describe an MR and scatterlist, and no part of that information is
stored in struct rpcrdma_req.
As part of closing the above race window, pass only the req's list
of registered MRs to ro_unmap_sync, rather than the rpcrdma_req
itself.
Some extra transport header sanity checking is removed. Since the
client depends on its own recollection of what memory had been
registered, there doesn't seem to be a way to abuse this change.
And, the check was not terribly effective. If the client had sent
Read chunks, the "list_empty" test is negative in both of the
removed cases, which are actually looking for Write or Reply
chunks.
BugLink: https://bugzilla.linux-nfs.org/show_bug.cgi?id=305
Fixes: 68791649a725 ('xprtrdma: Invalidate in the RPC reply ... ')
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
There are rare cases where an rpcrdma_req and its matched
rpcrdma_rep can be re-used, via rpcrdma_buffer_put, while the RPC
reply handler is still using that req. This is typically due to a
signal firing at just the wrong instant.
As part of closing this race window, avoid using the wrong
rpcrdma_rep to detect remotely invalidated MRs. Mark MRs as
invalidated while we are sure the rep is still OK to use.
BugLink: https://bugzilla.linux-nfs.org/show_bug.cgi?id=305
Fixes: 68791649a725 ('xprtrdma: Invalidate in the RPC reply ... ')
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
Callers assume the ro_unmap_sync and ro_unmap_safe methods empty
the list of registered MRs. Ensure that all paths through
fmr_op_unmap_sync() remove MWs from that list.
Fixes: 9d6b04097882 ("xprtrdma: Place registered MWs on a ... ")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
The current check will always be true and will always jump to
err1, this looks dubious to me. I believe && should be used
instead of ||.
Detected by CoverityScan, CID#1450120 ("Logically Dead Code")
Fixes: 107c1d0a991a ("svcrdma: Avoid Send Queue overflow")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
Clean up: No need to save the I/O direction. The functions that
release svc_rdma_chunk_ctxt already know what direction to use.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
Clean up: Use offset_in_page() macro instead of open-coding.
Reported-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
Clean up: Registration mode details are now handled by the rdma_rw
API, and thus can be removed from svcrdma.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
There's no longer a need to compare each SGE's lkey with the PD's
local_dma_lkey. Now that FRWR is gone, all DMA mappings are for
pages that were registered with this key.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
Clean up: Now that the svc_rdma_recvfrom path uses the rdma_rw API,
the details of Read sink buffer registration are dealt with by the
kernel's RDMA core. This cache is no longer used, and can be
removed.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
Clean up:
The generic RDMA R/W API conversion of svc_rdma_recvfrom replaced
the Register, Read, and Invalidate completion handlers. Remove the
old ones, which are no longer used.
These handlers shared some helper code with svc_rdma_wc_send. Fold
the wc_common helper back into the one remaining completion handler.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
When an RPC-over-RDMA request is received, the Receive buffer
contains a Transport Header possibly followed by an RPC message.
Even though rq_arg.head[0] (as passed to NFSD) does not contain the
Transport Header header, currently rq_arg.len includes the size of
the Transport Header.
That violates the intent of the xdr_buf API contract. .buflen should
include everything, but .len should be exactly the length of the RPC
message in the buffer.
The rq_arg fields are summed together at the end of
svc_rdma_recvfrom to obtain the correct return value. rq_arg.len
really ought to contain the correct number of bytes already, but it
currently doesn't due to the above misbehavior.
Let's instead ensure that .buflen includes the length of the
transport header, and that .len is always equal to head.iov_len +
.page_len + tail.iov_len .
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
The current svcrdma recvfrom code path has a lot of detail about
registration mode and the type of port (iWARP, IB, etc).
Instead, use the RDMA core's generic R/W API. This shares code with
other RDMA-enabled ULPs that manages the gory details of buffer
registration and the posting of RDMA Read Work Requests.
Since the Read list marshaling code is being replaced, I took the
opportunity to replace C structure-based XDR encoding code with more
portable code that uses pointer arithmetic.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
svc_rdma_rw.c already contains helpers for the sendto path.
Introduce helpers for the recvfrom path.
The plan is to replace the local NFSD bespoke code that constructs
and posts RDMA Read Work Requests with calls to the rdma_rw API.
This shares code with other RDMA-enabled ULPs that manages the gory
details of buffer registration and posting Work Requests.
This new code also puts all RDMA_NOMSG-specific logic in one place.
Lastly, the use of rqstp->rq_arg.pages is deprecated in favor of
using rqstp->rq_pages directly, for clarity.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
>From what I can tell, calling ->recvfrom when there is no work to do
is a normal part of operation. This is the only way svc_recv can
tell when there is no more data ready to receive on the transport.
Neither the TCP nor the UDP transport implementations have a
"starve" metric.
The cost of receive starvation accounting is bumping an atomic, which
results in extra (IMO unnecessary) bus traffic between CPU sockets,
while holding a spin lock.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
Identify malformed transport headers and unsupported chunk
combinations as early as possible.
- Ensure that segment lengths are not crazy.
- Ensure that the Reply chunk's segment count is not crazy.
With a 1KB inline threshold, the largest number of Write segments
that can be conveyed is about 60 (for a RDMA_NOMSG Reply message).
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
Identify malformed transport headers and unsupported chunk
combinations as early as possible.
- Reject RPC-over-RDMA messages that contain more than one Write
chunk, since this implementation does not support more than one per
message.
- Ensure that segment lengths are not crazy.
- Ensure that the chunk's segment count is not crazy.
With a 1KB inline threshold, the largest number of Write segments
that can be conveyed is about 60 (for a RDMA_NOMSG Reply message).
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
Identify malformed transport headers and unsupported chunk
combinations as early as possible.
- Reject RPC-over-RDMA messages that contain more than one Read chunk,
since this implementation currently does not support more than one
per RPC transaction.
- Ensure that segment lengths are not crazy.
- Remove the segment count check. With a 1KB inline threshold, the
largest number of Read segments that can be conveyed is about 40
(for a RDMA_NOMSG Call message). This is nowhere near
RPCSVC_MAXPAGES. As far as I can tell, that was just a sanity
check and does not enforce an implementation limit.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
svc_rdma_marshal.c has one remaining exported function --
svc_rdma_xdr_decode_req -- and it has a single call site. Take
the same approach as the sendto path, and move this function
into the source file where it is called.
This is a refactoring change only.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
Sanity case: Catch the case where more Work Requests are being
posted to the Send Queue than there are Send Queue Entries.
This might happen if a client sends a chunk with more segments than
there are SQEs for the transport. The server can't send that reply,
so the transport will deadlock unless the client drops the RPC.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
The server displays "svcrdma: failed to post Send WR (-107)" in the
kernel log when the client disconnects. This could flood the server's
log, so remove the message.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
xprt_rdma_bc_setup()
Omit an extra message for a memory allocation failure in this function.
This issue was detected by using the Coccinelle software.
Link: http://events.linuxfoundation.org/sites/events/files/slides/LCJ16-Refactor_Strings-WSang_0.pdf
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
|
|
Pull nfsd updates from Bruce Fields:
"Another RDMA update from Chuck Lever, and a bunch of miscellaneous
bugfixes"
* tag 'nfsd-4.12' of git://linux-nfs.org/~bfields/linux: (26 commits)
nfsd: Fix up the "supattr_exclcreat" attributes
nfsd: encoders mustn't use unitialized values in error cases
nfsd: fix undefined behavior in nfsd4_layout_verify
lockd: fix lockd shutdown race
NFSv4: Fix callback server shutdown
SUNRPC: Refactor svc_set_num_threads()
NFSv4.x/callback: Create the callback service through svc_create_pooled
lockd: remove redundant check on block
svcrdma: Clean out old XDR encoders
svcrdma: Remove the req_map cache
svcrdma: Remove unused RDMA Write completion handler
svcrdma: Reduce size of sge array in struct svc_rdma_op_ctxt
svcrdma: Clean up RPC-over-RDMA backchannel reply processing
svcrdma: Report Write/Reply chunk overruns
svcrdma: Clean up RDMA_ERROR path
svcrdma: Use rdma_rw API in RPC reply path
svcrdma: Introduce local rdma_rw API helpers
svcrdma: Clean up svc_rdma_get_inv_rkey()
svcrdma: Add helper to save pages under I/O
svcrdma: Eliminate RPCRDMA_SQ_DEPTH_MULT
...
|
|
Clean up: These have been replaced and are no longer used.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
req_maps are no longer used by the send path and can thus be removed.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
Clean up. All RDMA Write completions are now handled by
svc_rdma_wc_write_ctx.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
The sge array in struct svc_rdma_op_ctxt is no longer used for
sending RDMA Write WRs. It need only accommodate the construction of
Send and Receive WRs. The maximum inline size is the largest payload
it needs to handle now.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
