summaryrefslogtreecommitdiff
path: root/net/sched
AgeCommit message (Collapse)Author
2017-06-08net: propagate tc filter chain index down the ndo_setup_tc callJiri Pirko
We need to push the chain index down to the drivers, so they have the information to which chain the rule belongs. For now, no driver supports multichain offload, so only chain 0 is supported. This is needed to prevent chain squashes during offload for now. Later this will be used to implement multichain offload. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-06net: sched: introduce a TRAP control actionJiri Pirko
There is need to instruct the HW offloaded path to push certain matched packets to cpu/kernel for further analysis. So this patch introduces a new TRAP control action to TC. For kernel datapath, this action does not make much sense. So with the same logic as in HW, new TRAP behaves similar to STOLEN. The skb is just dropped in the datapath (and virtually ejected to an upper level, which does not exist in case of kernel). Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Yotam Gigi <yotamg@mellanox.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-05net: sched: select cls when cls_act is enabledJiri Pirko
It really makes no sense to have cls_act enabled without cls. In that case, the cls_act code is dead. So select it. This also fixes an issue recently reported by kbuild robot: [linux-next:master 1326/4151] net/sched/act_api.c:37:18: error: implicit declaration of function 'tcf_chain_get' Reported-by: kbuild test robot <fengguang.wu@intel.com> Fixes: db50514f9a9c ("net: sched: add termination action to allow goto chain") Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-04net/sched: cls_flower: add support for matching on ip tos and ttlOr Gerlitz
Benefit from the support of ip header fields dissection and allow users to set rules matching on ipv4 tos and ttl or ipv6 traffic-class and hoplimit. Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-25net_sched: only create filter chains for new filters/actionsWANG Cong
tcf_chain_get() always creates a new filter chain if not found in existing ones. This is totally unnecessary when we get or delete filters, new chain should be only created for new filters (or new actions). Fixes: 5bc1701881e3 ("net: sched: introduce multichain support for filters") Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-25net: sched: cls_api: make reclassify return all the way back to the original tpJiri Pirko
With the introduction of chain goto action, the reclassification would cause the re-iteration of the actual chain. It makes more sense to restart the whole thing and re-iterate starting from the original tp - start of chain 0. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-24net/sched: flower: add support for matching on tcp flagsJiri Pirko
Benefit from the support of tcp flags dissection and allow user to insert rules matching on tcp flags. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-23net/sched: fix filter flushingJiri Pirko
When user instructs to remove all filters from chain, we cannot destroy the chain as other actions may hold a reference. Also the put in errout would try to destroy it again. So instead, just walk the chain and remove all existing filters. Fixes: 5bc1701881e3 ("net: sched: introduce multichain support for filters") Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-23net/sched: properly assign RCU pointer in tcf_chain_tp_insert/removeJiri Pirko
*p_filter_chain is rcu-dereferenced on reader path. So here in writer, property assign the pointer. Fixes: 2190d1d0944f ("net: sched: introduce helpers to work with filter chains") Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
2017-05-22net: sched: cls_matchall: fix null pointer dereferenceJiri Pirko
Since the head is guaranteed by the check above to be null, the call_rcu would explode. Remove the previously logically dead code that was made logically very much alive and kicking. Fixes: 985538eee06f ("net/sched: remove redundant null check on head") Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-19net: use skb->csum_not_inet to identify packets needing crc32cDavide Caratti
skb->csum_not_inet carries the indication on which algorithm is needed to compute checksum on skb in the transmit path, when skb->ip_summed is equal to CHECKSUM_PARTIAL. If skb carries a SCTP packet and crc32c hasn't been yet written in L4 header, skb->csum_not_inet is assigned to 1; otherwise, assume Internet Checksum is needed and thus set skb->csum_not_inet to 0. Suggested-by: Tom Herbert <tom@herbertland.com> Signed-off-by: Davide Caratti <dcaratti@redhat.com> Acked-by: Tom Herbert <tom@herbertland.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-17sch_dsmark: Fix uninitialized variable warning.David S. Miller
We still need to initialize err to -EINVAL for the case where 'opt' is NULL in dsmark_init(). Fixes: 6529eaba33f0 ("net: sched: introduce tcf block infractructure") Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-17net: sched: add termination action to allow goto chainJiri Pirko
Introduce new type of termination action called "goto_chain". This allows user to specify a chain to be processed. This action type is then processed as a return value in tcf_classify loop in similar way as "reclassify" is, only it does not reset to the first filter in chain but rather reset to the first filter of the desired chain. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-17net: sched: push tp down to action initJiri Pirko
Tp pointer will be needed by the next patch in order to get the chain. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-17net: sched: introduce multichain support for filtersJiri Pirko
Instead of having only one filter per block, introduce a list of chains for every block. Create chain 0 by default. UAPI is extended so the user can specify which chain he wants to change. If the new attribute is not specified, chain 0 is used. That allows to maintain backward compatibility. If chain does not exist and user wants to manipulate with it, new chain is created with specified index. Also, when last filter is removed from the chain, the chain is destroyed. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-17net: sched: push chain dump to a separate functionJiri Pirko
Since there will be multiple chains to dump, push chain dumping code to a separate function. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-17net: sched: introduce helpers to work with filter chainsJiri Pirko
Introduce struct tcf_chain object and set of helpers around it. Wraps up insertion, deletion and search in the filter chain. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-17net: sched: move TC_H_MAJ macro call into tcf_auto_prioJiri Pirko
Call the helper from the function rather than to always adjust the return value of the function. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-17net: sched: replace nprio by a bool to make the function more readableJiri Pirko
The use of "nprio" variable in tc_ctl_tfilter is a bit cryptic and makes a reader wonder what is going on for a while. So help him to understand this priority allocation dance a litte bit better. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-17net: sched: rename tcf_destroy_chain helperJiri Pirko
Make the name consistent with the rest of the helpers around. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-17net: sched: introduce tcf block infractructureJiri Pirko
Currently, the filter chains are direcly put into the private structures of qdiscs. In order to be able to have multiple chains per qdisc and to allow filter chains sharing among qdiscs, there is a need for common object that would hold the chains. This introduces such object and calls it "tcf_block". Helpers to get and put the blocks are provided to be called from individual qdisc code. Also, the original filter_list pointers are left in qdisc privs to allow the entry into tcf_block processing without any added overhead of possible multiple pointer dereference on fast path. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-17net: sched: move tc_classify function to cls_api.cJiri Pirko
Move tc_classify function to cls_api.c where it belongs, rename it to fit the namespace. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-16tcp: internal implementation for pacingEric Dumazet
BBR congestion control depends on pacing, and pacing is currently handled by sch_fq packet scheduler for performance reasons, and also because implemening pacing with FQ was convenient to truly avoid bursts. However there are many cases where this packet scheduler constraint is not practical. - Many linux hosts are not focusing on handling thousands of TCP flows in the most efficient way. - Some routers use fq_codel or other AQM, but still would like to use BBR for the few TCP flows they initiate/terminate. This patch implements an automatic fallback to internal pacing. Pacing is requested either by BBR or use of SO_MAX_PACING_RATE option. If sch_fq happens to be in the egress path, pacing is delegated to the qdisc, otherwise pacing is done by TCP itself. One advantage of pacing from TCP stack is to get more precise rtt estimations, and less work done from TX completion, since TCP Small queue limits are not generally hit. Setups with single TX queue but many cpus might even benefit from this. Note that unlike sch_fq, we do not take into account header sizes. Taking care of these headers would add additional complexity for no practical differences in behavior. Some performance numbers using 800 TCP_STREAM flows rate limited to ~48 Mbit per second on 40Gbit NIC. If MQ+pfifo_fast is used on the NIC : $ sar -n DEV 1 5 | grep eth 14:48:44 eth0 725743.00 2932134.00 46776.76 4335184.68 0.00 0.00 1.00 14:48:45 eth0 725349.00 2932112.00 46751.86 4335158.90 0.00 0.00 0.00 14:48:46 eth0 725101.00 2931153.00 46735.07 4333748.63 0.00 0.00 0.00 14:48:47 eth0 725099.00 2931161.00 46735.11 4333760.44 0.00 0.00 1.00 14:48:48 eth0 725160.00 2931731.00 46738.88 4334606.07 0.00 0.00 0.00 Average: eth0 725290.40 2931658.20 46747.54 4334491.74 0.00 0.00 0.40 $ vmstat 1 5 procs -----------memory---------- ---swap-- -----io---- -system-- ------cpu----- r b swpd free buff cache si so bi bo in cs us sy id wa st 4 0 0 259825920 45644 2708324 0 0 21 2 247 98 0 0 100 0 0 4 0 0 259823744 45644 2708356 0 0 0 0 2400825 159843 0 19 81 0 0 0 0 0 259824208 45644 2708072 0 0 0 0 2407351 159929 0 19 81 0 0 1 0 0 259824592 45644 2708128 0 0 0 0 2405183 160386 0 19 80 0 0 1 0 0 259824272 45644 2707868 0 0 0 32 2396361 158037 0 19 81 0 0 Now use MQ+FQ : lpaa23:~# echo fq >/proc/sys/net/core/default_qdisc lpaa23:~# tc qdisc replace dev eth0 root mq $ sar -n DEV 1 5 | grep eth 14:49:57 eth0 678614.00 2727930.00 43739.13 4033279.14 0.00 0.00 0.00 14:49:58 eth0 677620.00 2723971.00 43674.69 4027429.62 0.00 0.00 1.00 14:49:59 eth0 676396.00 2719050.00 43596.83 4020125.02 0.00 0.00 0.00 14:50:00 eth0 675197.00 2714173.00 43518.62 4012938.90 0.00 0.00 1.00 14:50:01 eth0 676388.00 2719063.00 43595.47 4020171.64 0.00 0.00 0.00 Average: eth0 676843.00 2720837.40 43624.95 4022788.86 0.00 0.00 0.40 $ vmstat 1 5 procs -----------memory---------- ---swap-- -----io---- -system-- ------cpu----- r b swpd free buff cache si so bi bo in cs us sy id wa st 2 0 0 259832240 46008 2710912 0 0 21 2 223 192 0 1 99 0 0 1 0 0 259832896 46008 2710744 0 0 0 0 1702206 198078 0 17 82 0 0 0 0 0 259830272 46008 2710596 0 0 0 0 1696340 197756 1 17 83 0 0 4 0 0 259829168 46024 2710584 0 0 16 0 1688472 197158 1 17 82 0 0 3 0 0 259830224 46024 2710408 0 0 0 0 1692450 197212 0 18 82 0 0 As expected, number of interrupts per second is very different. Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Cc: Neal Cardwell <ncardwell@google.com> Cc: Yuchung Cheng <ycheng@google.com> Cc: Van Jacobson <vanj@google.com> Cc: Jerry Chu <hkchu@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-11net: sched: optimize class dumpsEric Dumazet
In commit 59cc1f61f09c ("net: sched: convert qdisc linked list to hashtable") we missed the opportunity to considerably speed up tc_dump_tclass_root() if a qdisc handle is provided by user. Instead of iterating all the qdiscs, use qdisc_match_from_root() to directly get the one we look for. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: Cong Wang <xiyou.wangcong@gmail.com> Cc: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-08net: use kvmalloc with __GFP_REPEAT rather than open coded variantMichal Hocko
fq_alloc_node, alloc_netdev_mqs and netif_alloc* open code kmalloc with vmalloc fallback. Use the kvmalloc variant instead. Keep the __GFP_REPEAT flag based on explanation from Eric: "At the time, tests on the hardware I had in my labs showed that vmalloc() could deliver pages spread all over the memory and that was a small penalty (once memory is fragmented enough, not at boot time)" The way how the code is constructed means, however, that we prefer to go and hit the OOM killer before we fall back to the vmalloc for requests <=32kB (with 4kB pages) in the current code. This is rather disruptive for something that can be achived with the fallback. On the other hand __GFP_REPEAT doesn't have any useful semantic for these requests. So the effect of this patch is that requests which fit into 32kB will fall back to vmalloc easier now. Link: http://lkml.kernel.org/r/20170306103327.2766-3-mhocko@kernel.org Signed-off-by: Michal Hocko <mhocko@suse.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Eric Dumazet <edumazet@google.com> Cc: David Miller <davem@davemloft.net> Cc: Shakeel Butt <shakeelb@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-05-08treewide: use kv[mz]alloc* rather than opencoded variantsMichal Hocko
There are many code paths opencoding kvmalloc. Let's use the helper instead. The main difference to kvmalloc is that those users are usually not considering all the aspects of the memory allocator. E.g. allocation requests <= 32kB (with 4kB pages) are basically never failing and invoke OOM killer to satisfy the allocation. This sounds too disruptive for something that has a reasonable fallback - the vmalloc. On the other hand those requests might fallback to vmalloc even when the memory allocator would succeed after several more reclaim/compaction attempts previously. There is no guarantee something like that happens though. This patch converts many of those places to kv[mz]alloc* helpers because they are more conservative. Link: http://lkml.kernel.org/r/20170306103327.2766-2-mhocko@kernel.org Signed-off-by: Michal Hocko <mhocko@suse.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> # Xen bits Acked-by: Kees Cook <keescook@chromium.org> Acked-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Andreas Dilger <andreas.dilger@intel.com> # Lustre Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> # KVM/s390 Acked-by: Dan Williams <dan.j.williams@intel.com> # nvdim Acked-by: David Sterba <dsterba@suse.com> # btrfs Acked-by: Ilya Dryomov <idryomov@gmail.com> # Ceph Acked-by: Tariq Toukan <tariqt@mellanox.com> # mlx4 Acked-by: Leon Romanovsky <leonro@mellanox.com> # mlx5 Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Anton Vorontsov <anton@enomsg.org> Cc: Colin Cross <ccross@android.com> Cc: Tony Luck <tony.luck@intel.com> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Kent Overstreet <kent.overstreet@gmail.com> Cc: Santosh Raspatur <santosh@chelsio.com> Cc: Hariprasad S <hariprasad@chelsio.com> Cc: Yishai Hadas <yishaih@mellanox.com> Cc: Oleg Drokin <oleg.drokin@intel.com> Cc: "Yan, Zheng" <zyan@redhat.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: David Miller <davem@davemloft.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-05-04net/sched: remove redundant null check on headColin Ian King
head is previously null checked and so the 2nd null check on head is redundant and therefore can be removed. Detected by CoverityScan, CID#1399505 ("Logically dead code") Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-02net: sched: add helpers to handle extended actionsJiri Pirko
Jump is now the only one using value action opcode. This is going to change soon. So introduce helpers to work with this. Convert TC_ACT_JUMP. This also fixes the TC_ACT_JUMP check, which is incorrectly done as a bit check, not a value check. Fixes: e0ee84ded796 ("net sched actions: Complete the JUMPX opcode") Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-01flower: check unused bits in MPLS fieldsBenjamin LaHaise
Since several of the the netlink attributes used to configure the flower classifier's MPLS TC, BOS and Label fields have additional bits which are unused, check those bits to ensure that they are actually 0 as suggested by Jamal. Signed-off-by: Benjamin LaHaise <benjamin.lahaise@netronome.com> Cc: David Miller <davem@davemloft.net> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: Simon Horman <simon.horman@netronome.com> Cc: Jakub Kicinski <kubakici@wp.pl> Cc: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-25net sched actions: Complete the JUMPX opcodeJamal Hadi Salim
per discussion at netconf/netdev: When we have an action that is capable of branching (example a policer), we can achieve a continuation of the action graph by programming a "continue" where we find an exact replica of the same filter rule with a lower priority and the remainder of the action graph. When you have 100s of thousands of filters which require such a feature it gets very inefficient to do two lookups. This patch completes a leftover feature of action codes. Its time has come. Example below where a user labels packets with a different skbmark on ingress of a port depending on whether they have/not exceeded the configured rate. This mark is then used to make further decisions on some egress port. #rate control, very low so we can easily see the effect sudo $TC actions add action police rate 1kbit burst 90k \ conform-exceed pipe/jump 2 index 10 # skbedit index 11 will be used if the user conforms sudo $TC actions add action skbedit mark 11 ok index 11 # skbedit index 12 will be used if the user does not conform sudo $TC actions add action skbedit mark 12 ok index 12 #lets bind the user .. sudo $TC filter add dev $ETH parent ffff: protocol ip prio 8 u32 \ match ip dst 127.0.0.8/32 flowid 1:10 \ action police index 10 \ action skbedit index 11 \ action skbedit index 12 #run a ping -f and see what happens.. # jhs@foobar:~$ sudo $TC -s filter ls dev $ETH parent ffff: protocol ip filter pref 8 u32 filter pref 8 u32 fh 800: ht divisor 1 filter pref 8 u32 fh 800::800 order 2048 key ht 800 bkt 0 flowid 1:10 (rule hit 2800 success 1005) match 7f000008/ffffffff at 16 (success 1005 ) action order 1: police 0xa rate 1Kbit burst 23440b mtu 2Kb action pipe/jump 2 overhead 0b ref 2 bind 1 installed 207 sec used 122 sec Action statistics: Sent 84420 bytes 1005 pkt (dropped 0, overlimits 721 requeues 0) backlog 0b 0p requeues 0 action order 2: skbedit mark 11 pass index 11 ref 2 bind 1 installed 204 sec used 122 sec Action statistics: Sent 60564 bytes 721 pkt (dropped 0, overlimits 0 requeues 0) backlog 0b 0p requeues 0 action order 3: skbedit mark 12 pass index 12 ref 2 bind 1 installed 201 sec used 122 sec Action statistics: Sent 23856 bytes 284 pkt (dropped 0, overlimits 0 requeues 0) backlog 0b 0p requeues 0 Not bad, about 28% non-conforming packets.. Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-24cls_flower: add support for matching MPLS fields (v2)Benjamin LaHaise
Add support to the tc flower classifier to match based on fields in MPLS labels (TTL, Bottom of Stack, TC field, Label). Signed-off-by: Benjamin LaHaise <benjamin.lahaise@netronome.com> Signed-off-by: Benjamin LaHaise <bcrl@kvack.org> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Simon Horman <simon.horman@netronome.com> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: Cong Wang <xiyou.wangcong@gmail.com> Cc: Jiri Pirko <jiri@mellanox.com> Cc: Eric Dumazet <edumazet@google.com> Cc: Hadar Hen Zion <hadarh@mellanox.com> Cc: Gao Feng <fgao@ikuai8.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-21Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Both conflict were simple overlapping changes. In the kaweth case, Eric Dumazet's skb_cow() bug fix overlapped the conversion of the driver in net-next to use in-netdev stats. Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-21net_sched: remove useless NULL to tp->rootWANG Cong
There is no need to NULL tp->root in ->destroy(), since tp is going to be freed very soon, and existing readers are still safe to read them. For cls_route, we always init its tp->root, so it can't be NULL, we can drop more useless code. Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: John Fastabend <john.fastabend@gmail.com> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-21net_sched: move the empty tp check from ->destroy() to ->delete()WANG Cong
We could have a race condition where in ->classify() path we dereference tp->root and meanwhile a parallel ->destroy() makes it a NULL. Daniel cured this bug in commit d936377414fa ("net, sched: respect rcu grace period on cls destruction"). This happens when ->destroy() is called for deleting a filter to check if we are the last one in tp, this tp is still linked and visible at that time. The root cause of this problem is the semantic of ->destroy(), it does two things (for non-force case): 1) check if tp is empty 2) if tp is empty we could really destroy it and its caller, if cares, needs to check its return value to see if it is really destroyed. Therefore we can't unlink tp unless we know it is empty. As suggested by Daniel, we could actually move the test logic to ->delete() so that we can safely unlink tp after ->delete() tells us the last one is just deleted and before ->destroy(). Fixes: 1e052be69d04 ("net_sched: destroy proto tp when all filters are gone") Cc: Roi Dayan <roid@mellanox.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: John Fastabend <john.fastabend@gmail.com> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-20net sched actions: allocate act cookie earlyWolfgang Bumiller
Policing filters do not use the TCA_ACT_* enum and the tb[] nlattr array in tcf_action_init_1() doesn't get filled for them so we should not try to look for a TCA_ACT_COOKIE attribute in the then uninitialized array. The error handling in cookie allocation then calls tcf_hash_release() leading to invalid memory access later on. Additionally, if cookie allocation fails after an already existing non-policing filter has successfully been changed, tcf_action_release() should not be called, also we would have to roll back the changes in the error handling, so instead we now allocate the cookie early and assign it on success at the end. CVE-2017-7979 Fixes: 1045ba77a596 ("net sched actions: Add support for user cookies") Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-17net: rtnetlink: plumb extended ack to doit functionDavid Ahern
Add netlink_ext_ack arg to rtnl_doit_func. Pass extack arg to nlmsg_parse for doit functions that call it directly. This is the first step to using extended error reporting in rtnetlink. >From here individual subsystems can be updated to set netlink_ext_ack as needed. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-17Subject: net: allow configuring default qdiscstephen hemminger
Since 3.12 it has been possible to configure the default queuing discipline via sysctl. This patch adds ability to configure the default queue discipline in kernel configuration. This is useful for environments where configuring the value from userspace is difficult to manage. The default is still the same as before (pfifo_fast) and it is possible to change after kernel init with sysctl. This is similar to how TCP congestion control works. Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts were simply overlapping changes. In the net/ipv4/route.c case the code had simply moved around a little bit and the same fix was made in both 'net' and 'net-next'. In the net/sched/sch_generic.c case a fix in 'net' happened at the same time that a new argument was added to qdisc_hash_add(). Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-13netlink: pass extended ACK struct to parsing functionsJohannes Berg
Pass the new extended ACK reporting struct to all of the generic netlink parsing functions. For now, pass NULL in almost all callers (except for some in the core.) Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-06net_sched: check noop_qdisc before qdisc_hash_add()WANG Cong
Dmitry reported a crash when injecting faults in attach_one_default_qdisc() and dev->qdisc is still a noop_disc, the check before qdisc_hash_add() fails to catch it because it tests NULL. We should test against noop_qdisc since it is the default qdisc at this point. Fixes: 59cc1f61f09c ("net: sched: convert qdisc linked list to hashtable") Reported-by: Dmitry Vyukov <dvyukov@google.com> Cc: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Acked-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-05net: sched: choke: remove some dead codeDan Carpenter
We accidentally left this dead code behind after commit 5952fde10c35 ("net: sched: choke: remove dead filter classify code"). Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-24net_sched: use setup_deferrable_timerGeliang Tang
Use setup_deferrable_timer() instead of init_timer_deferrable() to simplify the code. Signed-off-by: Geliang Tang <geliangtang@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-24net: sched: choke: remove dead filter classify codeJiri Pirko
sch_choke is classless qdisc so it does not define cl_ops. Therefore filter_list cannot be ever changed, being NULL all the time. Reason is this check in tc_ctl_tfilter: /* Is it classful? */ cops = q->ops->cl_ops; if (!cops) return -EINVAL; So remove this dead code. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-23sched: act_csum: don't mangle TCP and UDP GSO packetsDavide Caratti
after act_csum computes the checksum on skbs carrying GSO TCP/UDP packets, subsequent segmentation fails because skb_needs_check(skb, true) returns true. Because of that, skb_warn_bad_offload() is invoked and the following message is displayed: WARNING: CPU: 3 PID: 28 at net/core/dev.c:2553 skb_warn_bad_offload+0xf0/0xfd <...> [<ffffffff8171f486>] skb_warn_bad_offload+0xf0/0xfd [<ffffffff8161304c>] __skb_gso_segment+0xec/0x110 [<ffffffff8161340d>] validate_xmit_skb+0x12d/0x2b0 [<ffffffff816135d2>] validate_xmit_skb_list+0x42/0x70 [<ffffffff8163c560>] sch_direct_xmit+0xd0/0x1b0 [<ffffffff8163c760>] __qdisc_run+0x120/0x270 [<ffffffff81613b3d>] __dev_queue_xmit+0x23d/0x690 [<ffffffff81613fa0>] dev_queue_xmit+0x10/0x20 Since GSO is able to compute checksum on individual segments of such skbs, we can simply skip mangling the packet. Signed-off-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts: drivers/net/ethernet/broadcom/genet/bcmmii.c drivers/net/hyperv/netvsc.c kernel/bpf/hashtab.c Almost entirely overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-21sch_dsmark: fix invalid skb_cow() usageEric Dumazet
skb_cow(skb, sizeof(ip header)) is not very helpful in this context. First we need to use pskb_may_pull() to make sure the ip header is in skb linear part, then use skb_try_make_writable() to address clones issues. Fixes: 4c30719f4f55 ("[PKT_SCHED] dsmark: handle cloned and non-linear skb's") Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-16netem: apply correct delay when rate throttlingNik Unger
I recently reported on the netem list that iperf network benchmarks show unexpected results when a bandwidth throttling rate has been configured for netem. Specifically: 1) The measured link bandwidth *increases* when a higher delay is added 2) The measured link bandwidth appears higher than the specified limit 3) The measured link bandwidth for the same very slow settings varies significantly across machines The issue can be reproduced by using tc to configure netem with a 512kbit rate and various (none, 1us, 50ms, 100ms, 200ms) delays on a veth pair between network namespaces, and then using iperf (or any other network benchmarking tool) to test throughput. Complete detailed instructions are in the original email chain here: https://lists.linuxfoundation.org/pipermail/netem/2017-February/001672.html There appear to be two underlying bugs causing these effects: - The first issue causes long delays when the rate is slow and no delay is configured (e.g., "rate 512kbit"). This is because SKBs are not orphaned when no delay is configured, so orphaning does not occur until *after* the rate-induced delay has been applied. For this reason, adding a tiny delay (e.g., "rate 512kbit delay 1us") dramatically increases the measured bandwidth. - The second issue is that rate-induced delays are not correctly applied, allowing SKB delays to occur in parallel. The indended approach is to compute the delay for an SKB and to add this delay to the end of the current queue. However, the code does not detect existing SKBs in the queue due to improperly testing sch->q.qlen, which is nonzero even when packets exist only in the rbtree. Consequently, new SKBs do not wait for the current queue to empty. When packet delays vary significantly (e.g., if packet sizes are different), then this also causes unintended reordering. I modified the code to expect a delay (and orphan the SKB) when a rate is configured. I also added some defensive tests that correctly find the latest scheduled delivery time, even if it is (unexpectedly) for a packet in sch->q. I have tested these changes on the latest kernel (4.11.0-rc1+) and the iperf / ping test results are as expected. Signed-off-by: Nik Unger <njunger@uwaterloo.ca> Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-16net/sched: fq_codel: Avoid set-but-unused variableOr Gerlitz
The code introduced by commit 2ccccf5fb43f ("net_sched: update hierarchical backlog too") only sets prev_backlog in fq_codel_dequeue() but not using that anywhere, remove that setting. Cc: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-16net/sched: act_ife: Staticfy find_decode_metaid()Or Gerlitz
As it's used only on that file. Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-18 18:29:08 +0000