summaryrefslogtreecommitdiff
path: root/net/sched/sch_drr.c
AgeCommit message (Collapse)Author
2016-12-05net_sched: gen_estimator: complete rewrite of rate estimatorsEric Dumazet
1) Old code was hard to maintain, due to complex lock chains. (We probably will be able to remove some kfree_rcu() in callers) 2) Using a single timer to update all estimators does not scale. 3) Code was buggy on 32bit kernel (WRITE_ONCE() on 64bit quantity is not supposed to work well) In this rewrite : - I removed the RB tree that had to be scanned in gen_estimator_active(). qdisc dumps should be much faster. - Each estimator has its own timer. - Estimations are maintained in net_rate_estimator structure, instead of dirtying the qdisc. Minor, but part of the simplification. - Reading the estimator uses RCU and a seqcount to provide proper support for 32bit kernels. - We reduce memory need when estimators are not used, since we store a pointer, instead of the bytes/packets counters. - xt_rateest_mt() no longer has to grab a spinlock. (In the future, xt_rateest_tg() could be switched to per cpu counters) Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-25net_sched: drop packets after root qdisc lock is releasedEric Dumazet
Qdisc performance suffers when packets are dropped at enqueue() time because drops (kfree_skb()) are done while qdisc lock is held, delaying a dequeue() draining the queue. Nominal throughput can be reduced by 50 % when this happens, at a time we would like the dequeue() to proceed as fast as possible. Even FQ is vulnerable to this problem, while one of FQ goals was to provide some flow isolation. This patch adds a 'struct sk_buff **to_free' parameter to all qdisc->enqueue(), and in qdisc_drop() helper. I measured a performance increase of up to 12 %, but this patch is a prereq so that future batches in enqueue() can fly. Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-10Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts: net/sched/act_police.c net/sched/sch_drr.c net/sched/sch_hfsc.c net/sched/sch_prio.c net/sched/sch_red.c net/sched/sch_tbf.c In net-next the drop methods of the packet schedulers got removed, so the bug fixes to them in 'net' are irrelevant. A packet action unload crash fix conflicts with the addition of the new firstuse timestamp. Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-08sched: remove qdisc->dropFlorian Westphal
after removal of TCA_CBQ_OVL_STRATEGY from cbq scheduler, there are no more callers of ->drop() outside of other ->drop functions, i.e. nothing calls them. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-07net: sched: do not acquire qdisc spinlock in qdisc/class stats dumpEric Dumazet
Large tc dumps (tc -s {qdisc|class} sh dev ethX) done by Google BwE host agent [1] are problematic at scale : For each qdisc/class found in the dump, we currently lock the root qdisc spinlock in order to get stats. Sampling stats every 5 seconds from thousands of HTB classes is a challenge when the root qdisc spinlock is under high pressure. Not only the dumps take time, they also slow down the fast path (queue/dequeue packets) by 10 % to 20 % in some cases. An audit of existing qdiscs showed that sch_fq_codel is the only qdisc that might need the qdisc lock in fq_codel_dump_stats() and fq_codel_dump_class_stats() In v2 of this patch, I now use the Qdisc running seqcount to provide consistent reads of packets/bytes counters, regardless of 32/64 bit arches. I also changed rate estimators to use the same infrastructure so that they no longer need to lock root qdisc lock. [1] http://static.googleusercontent.com/media/research.google.com/en//pubs/archive/43838.pdf Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Cong Wang <xiyou.wangcong@gmail.com> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: John Fastabend <john.fastabend@gmail.com> Cc: Kevin Athey <kda@google.com> Cc: Xiaotian Pei <xiaotian@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-03sch_drr: update backlog as wellWANG Cong
Fixes: 2ccccf5fb43f ("net_sched: update hierarchical backlog too") Cc: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-29net_sched: update hierarchical backlog tooWANG Cong
When the bottom qdisc decides to, for example, drop some packet, it calls qdisc_tree_decrease_qlen() to update the queue length for all its ancestors, we need to update the backlog too to keep the stats on root qdisc accurate. Cc: Jamal Hadi Salim <jhs@mojatatu.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-29net_sched: introduce qdisc_replace() helperWANG Cong
Remove nearly duplicated code and prepare for the following patch. Cc: Jamal Hadi Salim <jhs@mojatatu.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-29net_sched: drr: check for NULL pointer in drr_dequeueBernie Harris
There are cases where qdisc_dequeue_peeked can return NULL, and the result is dereferenced later on in the function. Similarly to the other qdisc dequeue functions, check whether the skb pointer is NULL and if it is, goto out. Signed-off-by: Bernie Harris <bernie.harris@alliedtelesis.co.nz> Reviewed-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-27net: sched: consolidate tc_classify{,_compat}Daniel Borkmann
For classifiers getting invoked via tc_classify(), we always need an extra function call into tc_classify_compat(), as both are being exported as symbols and tc_classify() itself doesn't do much except handling of reclassifications when tp->classify() returned with TC_ACT_RECLASSIFY. CBQ and ATM are the only qdiscs that directly call into tc_classify_compat(), all others use tc_classify(). When tc actions are being configured out in the kernel, tc_classify() effectively does nothing besides delegating. We could spare this layer and consolidate both functions. pktgen on single CPU constantly pushing skbs directly into the netif_receive_skb() path with a dummy classifier on ingress qdisc attached, improves slightly from 22.3Mpps to 23.1Mpps. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-30net: sched: enable per cpu qstatsJohn Fastabend
After previous patches to simplify qstats the qstats can be made per cpu with a packed union in Qdisc struct. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-30net: sched: restrict use of qstats qlenJohn Fastabend
This removes the use of qstats->qlen variable from the classifiers and makes it an explicit argument to gnet_stats_copy_queue(). The qlen represents the qdisc queue length and is packed into the qstats at the last moment before passnig to user space. By handling it explicitely we avoid, in the percpu stats case, having to figure out which per_cpu variable to put it in. It would probably be best to remove it from qstats completely but qstats is a user space ABI and can't be broken. A future patch could make an internal only qstats structure that would avoid having to allocate an additional u32 variable on the Qdisc struct. This would make the qstats struct 128bits instead of 128+32. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-30net: sched: implement qstat helper routinesJohn Fastabend
This adds helpers to manipulate qstats logic and replaces locations that touch the counters directly. This simplifies future patches to push qstats onto per cpu counters. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-30net: sched: make bstats per cpu and estimator RCU safeJohn Fastabend
In order to run qdisc's without locking statistics and estimators need to be handled correctly. To resolve bstats make the statistics per cpu. And because this is only needed for qdiscs that are running without locks which is not the case for most qdiscs in the near future only create percpu stats when qdiscs set the TCQ_F_CPUSTATS flag. Next because estimators use the bstats to calculate packets per second and bytes per second the estimator code paths are updated to use the per cpu statistics. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-13net: rcu-ify tcf_protoJohn Fastabend
rcu'ify tcf_proto this allows calling tc_classify() without holding any locks. Updaters are protected by RTNL. This patch prepares the core net_sched infrastracture for running the classifier/action chains without holding the qdisc lock however it does nothing to ensure cls_xxx and act_xxx types also work without locking. Additional patches are required to address the fall out. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-11net_sched: drr: warn when qdisc is not work conservingFlorian Westphal
The DRR scheduler requires that items on the active list are work conserving, i.e. do not hold on to skbs for throttling purposes, etc. Attaching e.g. tbf renders DRR useless because all other classes on the active list are delayed as well. So, warn users that this configuration won't work as expected; we already do this in couple of other qdiscs, see e.g. commit b00355db3f88d96810a60011a30cfb2c3469409d ('pkt_sched: sch_hfsc: sch_htb: Add non-work-conserving warning handler') The 'const' change is needed to avoid compiler warning ("discards 'const' qualifier from pointer target type"). tested with: drr_hier() { parent=$1 classes=$2 for i in $(seq 1 $classes); do classid=$parent$(printf %x $i) tc class add dev eth0 parent $parent classid $classid drr tc qdisc add dev eth0 parent $classid tbf rate 64kbit burst 256kbit limit 64kbit done } tc qdisc add dev eth0 root handle 1: drr drr_hier 1: 32 tc filter add dev eth0 protocol all pref 1 parent 1: handle 1 flow hash keys dst perturb 1 divisor 32 Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-11net_sched: add 64bit rate estimatorsEric Dumazet
struct gnet_stats_rate_est contains u32 fields, so the bytes per second field can wrap at 34360Mbit. Add a new gnet_stats_rate_est64 structure to get 64bit bps/pps fields, and switch the kernel to use this structure natively. This structure is dumped to user space as a new attribute : TCA_STATS_RATE_EST64 Old tc command will now display the capped bps (to 34360Mbit), instead of wrapped values, and updated tc command will display correct information. Old tc command output, after patch : eric:~# tc -s -d qd sh dev lo qdisc pfifo 8001: root refcnt 2 limit 1000p Sent 80868245400 bytes 1978837 pkt (dropped 0, overlimits 0 requeues 0) rate 34360Mbit 189696pps backlog 0b 0p requeues 0 This patch carefully reorganizes "struct Qdisc" layout to get optimal performance on SMP. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-27hlist: drop the node parameter from iteratorsSasha Levin
I'm not sure why, but the hlist for each entry iterators were conceived list_for_each_entry(pos, head, member) The hlist ones were greedy and wanted an extra parameter: hlist_for_each_entry(tpos, pos, head, member) Why did they need an extra pos parameter? I'm not quite sure. Not only they don't really need it, it also prevents the iterator from looking exactly like the list iterator, which is unfortunate. Besides the semantic patch, there was some manual work required: - Fix up the actual hlist iterators in linux/list.h - Fix up the declaration of other iterators based on the hlist ones. - A very small amount of places were using the 'node' parameter, this was modified to use 'obj->member' instead. - Coccinelle didn't handle the hlist_for_each_entry_safe iterator properly, so those had to be fixed up manually. The semantic patch which is mostly the work of Peter Senna Tschudin is here: @@ iterator name hlist_for_each_entry, hlist_for_each_entry_continue, hlist_for_each_entry_from, hlist_for_each_entry_rcu, hlist_for_each_entry_rcu_bh, hlist_for_each_entry_continue_rcu_bh, for_each_busy_worker, ax25_uid_for_each, ax25_for_each, inet_bind_bucket_for_each, sctp_for_each_hentry, sk_for_each, sk_for_each_rcu, sk_for_each_from, sk_for_each_safe, sk_for_each_bound, hlist_for_each_entry_safe, hlist_for_each_entry_continue_rcu, nr_neigh_for_each, nr_neigh_for_each_safe, nr_node_for_each, nr_node_for_each_safe, for_each_gfn_indirect_valid_sp, for_each_gfn_sp, for_each_host; type T; expression a,c,d,e; identifier b; statement S; @@ -T b; <+... when != b ( hlist_for_each_entry(a, - b, c, d) S | hlist_for_each_entry_continue(a, - b, c) S | hlist_for_each_entry_from(a, - b, c) S | hlist_for_each_entry_rcu(a, - b, c, d) S | hlist_for_each_entry_rcu_bh(a, - b, c, d) S | hlist_for_each_entry_continue_rcu_bh(a, - b, c) S | for_each_busy_worker(a, c, - b, d) S | ax25_uid_for_each(a, - b, c) S | ax25_for_each(a, - b, c) S | inet_bind_bucket_for_each(a, - b, c) S | sctp_for_each_hentry(a, - b, c) S | sk_for_each(a, - b, c) S | sk_for_each_rcu(a, - b, c) S | sk_for_each_from -(a, b) +(a) S + sk_for_each_from(a) S | sk_for_each_safe(a, - b, c, d) S | sk_for_each_bound(a, - b, c) S | hlist_for_each_entry_safe(a, - b, c, d, e) S | hlist_for_each_entry_continue_rcu(a, - b, c) S | nr_neigh_for_each(a, - b, c) S | nr_neigh_for_each_safe(a, - b, c, d) S | nr_node_for_each(a, - b, c) S | nr_node_for_each_safe(a, - b, c, d) S | - for_each_gfn_sp(a, c, d, b) S + for_each_gfn_sp(a, c, d) S | - for_each_gfn_indirect_valid_sp(a, c, d, b) S + for_each_gfn_indirect_valid_sp(a, c, d) S | for_each_host(a, - b, c) S | for_each_host_safe(a, - b, c, d) S | for_each_mesh_entry(a, - b, c, d) S ) ...+> [akpm@linux-foundation.org: drop bogus change from net/ipv4/raw.c] [akpm@linux-foundation.org: drop bogus hunk from net/ipv6/raw.c] [akpm@linux-foundation.org: checkpatch fixes] [akpm@linux-foundation.org: fix warnings] [akpm@linux-foudnation.org: redo intrusive kvm changes] Tested-by: Peter Senna Tschudin <peter.senna@gmail.com> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: Sasha Levin <sasha.levin@oracle.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Gleb Natapov <gleb@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-09-27pkt_sched: Fix warning false positives.David S. Miller
GCC refuses to recognize that all error control flows do in fact set err to something. Add an explicit initialization to shut it up. net/sched/sch_drr.c: In function ‘drr_enqueue’: net/sched/sch_drr.c:359:11: warning: ‘err’ may be used uninitialized in this function [-Wmaybe-uninitialized] net/sched/sch_qfq.c: In function ‘qfq_enqueue’: net/sched/sch_qfq.c:885:11: warning: ‘err’ may be used uninitialized in this function [-Wmaybe-uninitialized] Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-10net_sched: update bstats in dequeue()Eric Dumazet
Class bytes/packets stats can be misleading because they are updated in enqueue() while packet might be dropped later. We already fixed all qdiscs but sch_atm. This patch makes the final cleanup. class rate estimators can now match qdisc ones. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-01pkt_sched: Stop using NLA_PUT*().David S. Miller
These macros contain a hidden goto, and are thus extremely error prone and make code hard to audit. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-20net_sched: accurate bytes/packets stats/ratesEric Dumazet
In commit 44b8288308ac9d (net_sched: pfifo_head_drop problem), we fixed a problem with pfifo_head drops that incorrectly decreased sch->bstats.bytes and sch->bstats.packets Several qdiscs (CHOKe, SFQ, pfifo_head, ...) are able to drop a previously enqueued packet, and bstats cannot be changed, so bstats/rates are not accurate (over estimated) This patch changes the qdisc_bstats updates to be done at dequeue() time instead of enqueue() time. bstats counters no longer account for dropped frames, and rates are more correct, since enqueue() bursts dont have effect on dequeue() rate. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Acked-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-10net_sched: factorize qdisc stats handlingEric Dumazet
HTB takes into account skb is segmented in stats updates. Generalize this to all schedulers. They should use qdisc_bstats_update() helper instead of manipulating bstats.bytes and bstats.packets Add bstats_update() helper too for classes that use gnet_stats_basic_packed fields. Note : Right now, TCQ_F_CAN_BYPASS shortcurt can be taken only if no stab is setup on qdisc. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-21net_sched: remove the unused parameter of qdisc_create_dflt()Changli Gao
The first parameter dev isn't in use in qdisc_create_dflt(). Signed-off-by: Changli Gao <xiaosuo@gmail.com> Acked-by: Jamal Hadi Salim <hadi@cyberus.ca> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-30include cleanup: Update gfp.h and slab.h includes to prepare for breaking ↵Tejun Heo
implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2009-10-07pkt_sched: gen_estimator: Dont report fake rate estimatorsEric Dumazet
Jarek Poplawski a écrit : > > > Hmm... So you made me to do some "real" work here, and guess what?: > there is one serious checkpatch warning! ;-) Plus, this new parameter > should be added to the function description. Otherwise: > Signed-off-by: Jarek Poplawski <jarkao2@gmail.com> > > Thanks, > Jarek P. > > PS: I guess full "Don't" would show we really mean it... Okay :) Here is the last round, before the night ! Thanks again [RFC] pkt_sched: gen_estimator: Don't report fake rate estimators We currently send TCA_STATS_RATE_EST elements to netlink users, even if no estimator is running. # tc -s -d qdisc qdisc pfifo_fast 0: dev eth0 root bands 3 priomap 1 2 2 2 1 2 0 0 1 1 1 1 1 1 1 1 Sent 112833764978 bytes 1495081739 pkt (dropped 0, overlimits 0 requeues 0) rate 0bit 0pps backlog 0b 0p requeues 0 User has no way to tell if the "rate 0bit 0pps" is a real estimation, or a fake one (because no estimator is active) After this patch, tc command output is : $ tc -s -d qdisc qdisc pfifo_fast 0: dev eth0 root bands 3 priomap 1 2 2 2 1 2 0 0 1 1 1 1 1 1 1 1 Sent 561075 bytes 1196 pkt (dropped 0, overlimits 0 requeues 0) backlog 0b 0p requeues 0 We add a parameter to gnet_stats_copy_rate_est() function so that it can use gen_estimator_active(bstats, r), as suggested by Jarek. This parameter can be NULL if check is not necessary, (htb for example has a mandatory rate estimator) Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Jarek Poplawski <jarkao2@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-17pkt_sched: Fix qstats.qlen updating in dump_statsJarek Poplawski
Some classful qdiscs miss qstats.qlen updating with q.qlen of their child qdiscs in dump_stats methods. Signed-off-by: Jarek Poplawski <jarkao2@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-17net: restore gnet_stats_basic to previous definitionEric Dumazet
In 5e140dfc1fe87eae27846f193086724806b33c7d "net: reorder struct Qdisc for better SMP performance" the definition of struct gnet_stats_basic changed incompatibly, as copies of this struct are shipped to userland via netlink. Restoring old behavior is not welcome, for performance reason. Fix is to use a private structure for kernel, and teach gnet_stats_copy_basic() to convert from kernel to user land, using legacy structure (struct gnet_stats_basic) Based on a report and initial patch from Michael Spang. Reported-by: Michael Spang <mspang@csclub.uwaterloo.ca> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-15pkt_sched: Change misleading code in class delete.Jarek Poplawski
While looking for a possible reason of bugzilla report on HTB oops: http://bugzilla.kernel.org/show_bug.cgi?id=12858 I found the code in htb_delete calling htb_destroy_class on zero refcount is very misleading: it can suggest this is a common path, and destroy is called under sch_tree_lock. Actually, this can never happen like this because before deletion cops->get() is done, and after delete a class is still used by tclass_notify. The class destroy is always called from cops->put(), so without sch_tree_lock. This doesn't mean much now (since 2.6.27) because all vulnerable calls were moved from htb_destroy_class to htb_delete, but there was a bug in older kernels. The same change is done for other classful scheds, which, it seems, didn't have similar locking problems here. Reported-by: m0sia <m0sia@m0sia.ru> Signed-off-by: Jarek Poplawski <jarkao2@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-27pkt_sched: sch_drr: Fix oops in drr_change_class.Jarek Poplawski
drr_change_class lacks a check for NULL of tca[TCA_OPTIONS], so oops is possible. Reported-by: Denys Fedoryschenko <denys@visp.net.lb> Signed-off-by: Jarek Poplawski <jarkao2@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-25tc: check for errors in gen_rate_estimator creationStephen Hemminger
The functions gen_new_estimator and gen_replace_estimator can return errors, but they were being ignored. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-24pkt_sched: sch_drr: fix drr_dequeue loop()Patrick McHardy
Jarek Poplawski points out: If all child qdiscs of sch_drr are non-work-conserving (e.g. sch_tbf) drr_dequeue() will busy-loop waiting for skbs instead of leaving the job for a watchdog. Checking for list_empty() in each loop isn't necessary either, because this can never be true except the first time. Using non-work-conserving qdiscs as children of DRR makes no sense, simply bail out in that case. Reported-by: Jarek Poplawski <jarkao2@gmail.com> Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-21pkt_sched: sch_drr: Fix qlen in drr_drop()Jarek Poplawski
Signed-off-by: Jarek Poplawski <jarkao2@gmail.com> Acked-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-20pkt_sched: remove unnecessary xchg() in packet schedulersPatrick McHardy
The use of xchg() hasn't been necessary since 2.2.something when proper locking was added to packet schedulers. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-20pkt_sched: add DRR schedulerPatrick McHardy
Add classful DRR scheduler as a more flexible replacement for SFQ. The main difference to the algorithm described in "Efficient Fair Queueing using Deficit Round Robin" is that this implementation doesn't drop packets from the longest queue on overrun because its classful and limits are handled by each individual child qdisc. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>