summaryrefslogtreecommitdiff
path: root/net/rds
AgeCommit message (Collapse)Author
2019-07-27net: rds: Fix possible null-pointer dereferences in ↵Jia-Ju Bai
rds_rdma_cm_event_handler_cmn() In rds_rdma_cm_event_handler_cmn(), there are some if statements to check whether conn is NULL, such as on lines 65, 96 and 112. But conn is not checked before being used on line 108: trans->cm_connect_complete(conn, event); and on lines 140-143: rdsdebug("DISCONNECT event - dropping connection " "%pI6c->%pI6c\n", &conn->c_laddr, &conn->c_faddr); rds_conn_drop(conn); Thus, possible null-pointer dereferences may occur. To fix these bugs, conn is checked before being used. These bugs are found by a static analysis tool STCheck written by us. Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-19Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking fixes from David Miller: 1) Fix AF_XDP cq entry leak, from Ilya Maximets. 2) Fix handling of PHY power-down on RTL8411B, from Heiner Kallweit. 3) Add some new PCI IDs to iwlwifi, from Ihab Zhaika. 4) Fix handling of neigh timers wrt. entries added by userspace, from Lorenzo Bianconi. 5) Various cases of missing of_node_put(), from Nishka Dasgupta. 6) The new NET_ACT_CT needs to depend upon NF_NAT, from Yue Haibing. 7) Various RDS layer fixes, from Gerd Rausch. 8) Fix some more fallout from TCQ_F_CAN_BYPASS generalization, from Cong Wang. 9) Fix FIB source validation checks over loopback, also from Cong Wang. 10) Use promisc for unsupported number of filters, from Justin Chen. 11) Missing sibling route unlink on failure in ipv6, from Ido Schimmel. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (90 commits) tcp: fix tcp_set_congestion_control() use from bpf hook ag71xx: fix return value check in ag71xx_probe() ag71xx: fix error return code in ag71xx_probe() usb: qmi_wwan: add D-Link DWM-222 A2 device ID bnxt_en: Fix VNIC accounting when enabling aRFS on 57500 chips. net: dsa: sja1105: Fix missing unlock on error in sk_buff() gve: replace kfree with kvfree selftests/bpf: fix test_xdp_noinline on s390 selftests/bpf: fix "valid read map access into a read-only array 1" on s390 net/mlx5: Replace kfree with kvfree MAINTAINERS: update netsec driver ipv6: Unlink sibling route in case of failure liquidio: Replace vmalloc + memset with vzalloc udp: Fix typo in net/ipv4/udp.c net: bcmgenet: use promisc for unsupported filters ipv6: rt6_check should return NULL if 'from' is NULL tipc: initialize 'validated' field of received packets selftests: add a test case for rp_filter fib: relax source validation check for loopback packets mlxsw: spectrum: Do not process learned records with a dummy FID ...
2019-07-17net/rds: Initialize ic->i_fastreg_wrs upon allocationGerd Rausch
Otherwise, if an IB connection is torn down before "rds_ib_setup_qp" is called, the value of "ic->i_fastreg_wrs" is still at zero (as it wasn't initialized by "rds_ib_setup_qp"). Consequently "rds_ib_conn_path_shutdown" will spin forever, waiting for it to go back to "RDS_IB_DEFAULT_FR_WR", which of course will never happen as there are no outstanding work requests. Signed-off-by: Gerd Rausch <gerd.rausch@oracle.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-17net/rds: Keep track of and wait for FRWR segments in use upon shutdownGerd Rausch
Since "rds_ib_free_frmr" and "rds_ib_free_frmr_list" simply put the FRMR memory segments on the "drop_list" or "free_list", and it is the job of "rds_ib_flush_mr_pool" to reap those entries by ultimately issuing a "IB_WR_LOCAL_INV" work-request, we need to trigger and then wait for all those memory segments attached to a particular connection to be fully released before we can move on to release the QP, CQ, etc. So we make "rds_ib_conn_path_shutdown" wait for one more atomic_t called "i_fastreg_inuse_count" that keeps track of how many FRWR memory segments are out there marked "FRMR_IS_INUSE" (and also wake_up rds_ib_ring_empty_wait, as they go away). Signed-off-by: Gerd Rausch <gerd.rausch@oracle.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-17net/rds: Set fr_state only to FRMR_IS_FREE if IB_WR_LOCAL_INV had been ↵Gerd Rausch
successful Fix a bug where fr_state first goes to FRMR_IS_STALE, because of a failure of operation IB_WR_LOCAL_INV, but then gets set back to "FRMR_IS_FREE" uncoditionally, even though the operation failed. Signed-off-by: Gerd Rausch <gerd.rausch@oracle.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-17net/rds: Fix NULL/ERR_PTR inconsistencyGerd Rausch
Make function "rds_ib_try_reuse_ibmr" return NULL in case memory region could not be allocated, since callers simply check if the return value is not NULL. Signed-off-by: Gerd Rausch <gerd.rausch@oracle.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-17net/rds: Wait for the FRMR_IS_FREE (or FRMR_IS_STALE) transition after ↵Gerd Rausch
posting IB_WR_LOCAL_INV In order to: 1) avoid a silly bouncing between "clean_list" and "drop_list" triggered by function "rds_ib_reg_frmr" as it is releases frmr regions whose state is not "FRMR_IS_FREE" right away. 2) prevent an invalid access error in a race from a pending "IB_WR_LOCAL_INV" operation with a teardown ("dma_unmap_sg", "put_page") and de-registration ("ib_dereg_mr") of the corresponding memory region. Signed-off-by: Gerd Rausch <gerd.rausch@oracle.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-17net/rds: Get rid of "wait_clean_list_grace" and add lockingGerd Rausch
Waiting for activity on the "clean_list" to quiesce is no substitute for proper locking. We can have multiple threads competing for "llist_del_first" via "rds_ib_reuse_mr", and a single thread competing for "llist_del_all" and "llist_del_first" via "rds_ib_flush_mr_pool". Since "llist_del_first" depends on "list->first->next" not to change in the midst of the operation, simply waiting for all current calls to "rds_ib_reuse_mr" to quiesce across all CPUs is woefully inadequate: By the time "wait_clean_list_grace" is done iterating over all CPUs to see that there is no concurrent caller to "rds_ib_reuse_mr", a new caller may have just shown up on the first CPU. Furthermore, <linux/llist.h> explicitly calls out the need for locking: * Cases where locking is needed: * If we have multiple consumers with llist_del_first used in one consumer, * and llist_del_first or llist_del_all used in other consumers, * then a lock is needed. Also, while at it, drop the unused "pool" parameter from "list_to_llist_nodes". Signed-off-by: Gerd Rausch <gerd.rausch@oracle.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-17net/rds: Give fr_state a chance to transition to FRMR_IS_FREEGerd Rausch
In the context of FRMR (ib_frmr.c): Memory regions make it onto the "clean_list" via "rds_ib_flush_mr_pool", after the memory region has been posted for invalidation via "rds_ib_post_inv". At that point in time, "fr_state" may still be in state "FRMR_IS_INUSE", since the only place where "fr_state" transitions to "FRMR_IS_FREE" is in "rds_ib_mr_cqe_handler", which is triggered by a tasklet. So in case we notice that "fr_state != FRMR_IS_FREE" (see below), we wait for "fr_inv_done" to trigger with a maximum of 10msec. Then we check again, and only put the memory region onto the drop_list (via "rds_ib_free_frmr") in case the situation remains unchanged. This avoids the problem of memory-regions bouncing between "clean_list" and "drop_list" before they even have a chance to be properly invalidated. Signed-off-by: Gerd Rausch <gerd.rausch@oracle.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-15Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdmaLinus Torvalds
Pull rdma updates from Jason Gunthorpe: "A smaller cycle this time. Notably we see another new driver, 'Soft iWarp', and the deletion of an ancient unused driver for nes. - Revise and simplify the signature offload RDMA MR APIs - More progress on hoisting object allocation boiler plate code out of the drivers - Driver bug fixes and revisions for hns, hfi1, efa, cxgb4, qib, i40iw - Tree wide cleanups: struct_size, put_user_page, xarray, rst doc conversion - Removal of obsolete ib_ucm chardev and nes driver - netlink based discovery of chardevs and autoloading of the modules providing them - Move more of the rdamvt/hfi1 uapi to include/uapi/rdma - New driver 'siw' for software based iWarp running on top of netdev, much like rxe's software RoCE. - mlx5 feature to report events in their raw devx format to userspace - Expose per-object counters through rdma tool - Adaptive interrupt moderation for RDMA (DIM), sharing the DIM core from netdev" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (194 commits) RMDA/siw: Require a 64 bit arch RDMA/siw: Mark expected switch fall-throughs RDMA/core: Fix -Wunused-const-variable warnings rdma/siw: Remove set but not used variable 's' rdma/siw: Add missing dependencies on LIBCRC32C and DMA_VIRT_OPS RDMA/siw: Add missing rtnl_lock around access to ifa rdma/siw: Use proper enumerated type in map_cqe_status RDMA/siw: Remove unnecessary kthread create/destroy printouts IB/rdmavt: Fix variable shadowing issue in rvt_create_cq RDMA/core: Fix race when resolving IP address RDMA/core: Make rdma_counter.h compile stand alone IB/core: Work on the caller socket net namespace in nldev_newlink() RDMA/rxe: Fill in wc byte_len with IB_WC_RECV_RDMA_WITH_IMM RDMA/mlx5: Set RDMA DIM to be enabled by default RDMA/nldev: Added configuration of RDMA dynamic interrupt moderation to netlink RDMA/core: Provide RDMA DIM support for ULPs linux/dim: Implement RDMA adaptive moderation (DIM) IB/mlx5: Report correctly tag matching rendezvous capability docs: infiniband: add it to the driver-api bookset IB/mlx5: Implement VHCA tunnel mechanism in DEVX ...
2019-07-09rds: avoid version downgrade to legitimate newer peer connectionsSantosh Shilimkar
Connections with legitimate tos values can get into usual connection race. It can result in consumer reject. We don't want tos value or protocol version to be demoted for such connections otherwise piers would end up different tos values which can results in no connection. Example a peer initiated connection with say tos 8 while usual connection racing can get downgraded to tos 0 which is not desirable. Patch fixes above issue introduced by commit commit d021fabf525f ("rds: rdma: add consumer reject") Reported-by: Yanjun Zhu <yanjun.zhu@oracle.com> Tested-by: Yanjun Zhu <yanjun.zhu@oracle.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
2019-07-09rds: Return proper "tos" value to user-spaceGerd Rausch
The proper "tos" value needs to be returned to user-space (sockopt RDS_INFO_CONNECTIONS). Fixes: 3eb450367d08 ("rds: add type of service(tos) infrastructure") Signed-off-by: Gerd Rausch <gerd.rausch@oracle.com> Reviewed-by: Zhu Yanjun <yanjun.zhu@oracle.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
2019-07-09rds: Accept peer connection reject messages due to incompatible versionGerd Rausch
Prior to commit d021fabf525ff ("rds: rdma: add consumer reject") function "rds_rdma_cm_event_handler_cmn" would always honor a rejected connection attempt by issuing a "rds_conn_drop". The commit mentioned above added a "break", eliminating the "fallthrough" case and made the "rds_conn_drop" rather conditional: Now it only happens if a "consumer defined" reject (i.e. "rdma_reject") carries an integer-value of "1" inside "private_data": if (!conn) break; err = (int *)rdma_consumer_reject_data(cm_id, event, &len); if (!err || (err && ((*err) == RDS_RDMA_REJ_INCOMPAT))) { pr_warn("RDS/RDMA: conn <%pI6c, %pI6c> rejected, dropping connection\n", &conn->c_laddr, &conn->c_faddr); conn->c_proposed_version = RDS_PROTOCOL_COMPAT_VERSION; rds_conn_drop(conn); } rdsdebug("Connection rejected: %s\n", rdma_reject_msg(cm_id, event->status)); break; /* FALLTHROUGH */ A number of issues are worth mentioning here: #1) Previous versions of the RDS code simply rejected a connection by calling "rdma_reject(cm_id, NULL, 0);" So the value of the payload in "private_data" will not be "1", but "0". #2) Now the code has become dependent on host byte order and sizing. If one peer is big-endian, the other is little-endian, or there's a difference in sizeof(int) (e.g. ILP64 vs LP64), the *err check does not work as intended. #3) There is no check for "len" to see if the data behind *err is even valid. Luckily, it appears that the "rdma_reject(cm_id, NULL, 0)" will always carry 148 bytes of zeroized payload. But that should probably not be relied upon here. #4) With the added "break;", we might as well drop the misleading "/* FALLTHROUGH */" comment. This commit does _not_ address issue #2, as the sender would have to agree on a byte order as well. Here is the sequence of messages in this observed error-scenario: Host-A is pre-QoS changes (excluding the commit mentioned above) Host-B is post-QoS changes (including the commit mentioned above) #1 Host-B issues a connection request via function "rds_conn_path_transition" connection state transitions to "RDS_CONN_CONNECTING" #2 Host-A rejects the incompatible connection request (from #1) It does so by calling "rdma_reject(cm_id, NULL, 0);" #3 Host-B receives an "RDMA_CM_EVENT_REJECTED" event (from #2) But since the code is changed in the way described above, it won't drop the connection here, simply because "*err == 0". #4 Host-A issues a connection request #5 Host-B receives an "RDMA_CM_EVENT_CONNECT_REQUEST" event and ends up calling "rds_ib_cm_handle_connect". But since the state is already in "RDS_CONN_CONNECTING" (as of #1) it will end up issuing a "rdma_reject" without dropping the connection: if (rds_conn_state(conn) == RDS_CONN_CONNECTING) { /* Wait and see - our connect may still be succeeding */ rds_ib_stats_inc(s_ib_connect_raced); } goto out; #6 Host-A receives an "RDMA_CM_EVENT_REJECTED" event (from #5), drops the connection and tries again (goto #4) until it gives up. Tested-by: Zhu Yanjun <yanjun.zhu@oracle.com> Signed-off-by: Gerd Rausch <gerd.rausch@oracle.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
2019-07-09Revert "RDS: IB: split the mr registration and invalidation path"Gerd Rausch
This reverts commit 56012459310a1dbcc55c2dbf5500a9f7571402cb. RDS kept spinning inside function "rds_ib_post_reg_frmr", waiting for "i_fastreg_wrs" to become incremented: while (atomic_dec_return(&ibmr->ic->i_fastreg_wrs) <= 0) { atomic_inc(&ibmr->ic->i_fastreg_wrs); cpu_relax(); } Looking at the original commit: commit 56012459310a ("RDS: IB: split the mr registration and invalidation path") In there, the "rds_ib_mr_cqe_handler" was changed in the following way: void rds_ib_mr_cqe_handler(struct rds_ib_connection *ic, struct ib_wc *wc) if (frmr->fr_inv) { frmr->fr_state = FRMR_IS_FREE; frmr->fr_inv = false; atomic_inc(&ic->i_fastreg_wrs); } else { atomic_inc(&ic->i_fastunreg_wrs); } It looks like it's got it exactly backwards: Function "rds_ib_post_reg_frmr" keeps track of the outstanding requests via "i_fastreg_wrs". Function "rds_ib_post_inv" keeps track of the outstanding requests via "i_fastunreg_wrs" (post original commit). It also sets: frmr->fr_inv = true; However the completion handler "rds_ib_mr_cqe_handler" adjusts "i_fastreg_wrs" when "fr_inv" had been true, and adjusts "i_fastunreg_wrs" otherwise. The original commit was done in the name of performance: to remove the performance bottleneck No performance benefit could be observed with a fixed-up version of the original commit measured between two Oracle X7 servers, both equipped with Mellanox Connect-X5 HCAs. The prudent course of action is to revert this commit. Signed-off-by: Gerd Rausch <gerd.rausch@oracle.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
2019-07-09rds: fix reordering with composite message notificationSantosh Shilimkar
RDS composite message(rdma + control) user notification needs to be triggered once the full message is delivered and such a fix was added as part of commit 941f8d55f6d61 ("RDS: RDMA: Fix the composite message user notification"). But rds_send_remove_from_sock is missing data part notify check and hence at times the user don't get notification which isn't desirable. One way is to fix the rds_send_remove_from_sock to check of that case but considering the ordering complexity with completion handler and rdma + control messages are always dispatched back to back in same send context, just delaying the signaled completion on rmda work request also gets the desired behaviour. i.e Notifying application only after RDMA + control message send completes. So patch updates the earlier fix with this approach. The delay signaling completions of rdma op till the control message send completes fix was done by Venkat Venkatsubra in downstream kernel. Reviewed-and-tested-by: Zhu Yanjun <yanjun.zhu@oracle.com> Reviewed-by: Gerd Rausch <gerd.rausch@oracle.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
2019-06-28Merge tag 'v5.2-rc6' into rdma.git for-nextJason Gunthorpe
For dependencies in next patches. Resolve conflicts: - Use uverbs_get_cleared_udata() with new cq allocation flow - Continue to delete nes despite SPDX conflict - Resolve list appends in mlx5_command_str() - Use u16 for vport_rule stuff - Resolve list appends in struct ib_client Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-06-07Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Some ISDN files that got removed in net-next had some changes done in mainline, take the removals. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-06net: rds: fix memory leak in rds_ib_flush_mr_poolZhu Yanjun
When the following tests last for several hours, the problem will occur. Server: rds-stress -r 1.1.1.16 -D 1M Client: rds-stress -r 1.1.1.14 -s 1.1.1.16 -D 1M -T 30 The following will occur. " Starting up.... tsks tx/s rx/s tx+rx K/s mbi K/s mbo K/s tx us/c rtt us cpu % 1 0 0 0.00 0.00 0.00 0.00 0.00 -1.00 1 0 0 0.00 0.00 0.00 0.00 0.00 -1.00 1 0 0 0.00 0.00 0.00 0.00 0.00 -1.00 1 0 0 0.00 0.00 0.00 0.00 0.00 -1.00 " >From vmcore, we can find that clean_list is NULL. >From the source code, rds_mr_flushd calls rds_ib_mr_pool_flush_worker. Then rds_ib_mr_pool_flush_worker calls " rds_ib_flush_mr_pool(pool, 0, NULL); " Then in function " int rds_ib_flush_mr_pool(struct rds_ib_mr_pool *pool, int free_all, struct rds_ib_mr **ibmr_ret) " ibmr_ret is NULL. In the source code, " ... list_to_llist_nodes(pool, &unmap_list, &clean_nodes, &clean_tail); if (ibmr_ret) *ibmr_ret = llist_entry(clean_nodes, struct rds_ib_mr, llnode); /* more than one entry in llist nodes */ if (clean_nodes->next) llist_add_batch(clean_nodes->next, clean_tail, &pool->clean_list); ... " When ibmr_ret is NULL, llist_entry is not executed. clean_nodes->next instead of clean_nodes is added in clean_list. So clean_nodes is discarded. It can not be used again. The workqueue is executed periodically. So more and more clean_nodes are discarded. Finally the clean_list is NULL. Then this problem will occur. Fixes: 1bc144b62524 ("net, rds, Replace xlist in net/rds/xlist.h with llist") Signed-off-by: Zhu Yanjun <yanjun.zhu@oracle.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-05net: rds: fix memory leak when unload rds_rdmaZhu Yanjun
When KASAN is enabled, after several rds connections are created, then "rmmod rds_rdma" is run. The following will appear. " BUG rds_ib_incoming (Not tainted): Objects remaining in rds_ib_incoming on __kmem_cache_shutdown() Call Trace: dump_stack+0x71/0xab slab_err+0xad/0xd0 __kmem_cache_shutdown+0x17d/0x370 shutdown_cache+0x17/0x130 kmem_cache_destroy+0x1df/0x210 rds_ib_recv_exit+0x11/0x20 [rds_rdma] rds_ib_exit+0x7a/0x90 [rds_rdma] __x64_sys_delete_module+0x224/0x2c0 ? __ia32_sys_delete_module+0x2c0/0x2c0 do_syscall_64+0x73/0x190 entry_SYSCALL_64_after_hwframe+0x44/0xa9 " This is rds connection memory leak. The root cause is: When "rmmod rds_rdma" is run, rds_ib_remove_one will call rds_ib_dev_shutdown to drop the rds connections. rds_ib_dev_shutdown will call rds_conn_drop to drop rds connections as below. " rds_conn_path_drop(&conn->c_path[0], false); " In the above, destroy is set to false. void rds_conn_path_drop(struct rds_conn_path *cp, bool destroy) { atomic_set(&cp->cp_state, RDS_CONN_ERROR); rcu_read_lock(); if (!destroy && rds_destroy_pending(cp->cp_conn)) { rcu_read_unlock(); return; } queue_work(rds_wq, &cp->cp_down_w); rcu_read_unlock(); } In the above function, destroy is set to false. rds_destroy_pending is called. This does not move rds connections to ib_nodev_conns. So destroy is set to true to move rds connections to ib_nodev_conns. In rds_ib_unregister_client, flush_workqueue is called to make rds_wq finsh shutdown rds connections. The function rds_ib_destroy_nodev_conns is called to shutdown rds connections finally. Then rds_ib_recv_exit is called to destroy slab. void rds_ib_recv_exit(void) { kmem_cache_destroy(rds_ib_incoming_slab); kmem_cache_destroy(rds_ib_frag_slab); } The above slab memory leak will not occur again. >From tests, 256 rds connections [root@ca-dev14 ~]# time rmmod rds_rdma real 0m16.522s user 0m0.000s sys 0m8.152s 512 rds connections [root@ca-dev14 ~]# time rmmod rds_rdma real 0m32.054s user 0m0.000s sys 0m15.568s To rmmod rds_rdma with 256 rds connections, about 16 seconds are needed. And with 512 rds connections, about 32 seconds are needed. >From ftrace, when one rds connection is destroyed, " 19) | rds_conn_destroy [rds]() { 19) 7.782 us | rds_conn_path_drop [rds](); 15) | rds_shutdown_worker [rds]() { 15) | rds_conn_shutdown [rds]() { 15) 1.651 us | rds_send_path_reset [rds](); 15) 7.195 us | } 15) + 11.434 us | } 19) 2.285 us | rds_cong_remove_conn [rds](); 19) * 24062.76 us | } " So if many rds connections will be destroyed, this function rds_ib_destroy_nodev_conns uses most of time. Suggested-by: Håkon Bugge <haakon.bugge@oracle.com> Signed-off-by: Zhu Yanjun <yanjun.zhu@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-05net: rds: add per rds connection cache statisticsZhu Yanjun
The variable cache_allocs is to indicate how many frags (KiB) are in one rds connection frag cache. The command "rds-info -Iv" will output the rds connection cache statistics as below: " RDS IB Connections: LocalAddr RemoteAddr Tos SL LocalDev RemoteDev 1.1.1.14 1.1.1.14 58 255 fe80::2:c903:a:7a31 fe80::2:c903:a:7a31 send_wr=256, recv_wr=1024, send_sge=8, rdma_mr_max=4096, rdma_mr_size=257, cache_allocs=12 " This means that there are about 12KiB frag in this rds connection frag cache. Since rds.h in rds-tools is not related with the kernel rds.h, the change in kernel rds.h does not affect rds-tools. rds-info in rds-tools 2.0.5 and 2.0.6 is tested with this commit. It works well. Signed-off-by: Zhu Yanjun <yanjun.zhu@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-21rds: Don't check return value from destroy CQLeon Romanovsky
There is no value in checking ib_destroy_cq() result and skipping to clear struct ic fields. This connection needs to be reinitialized anyway. Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-05-21treewide: Add SPDX license identifier - Makefile/KconfigThomas Gleixner
Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-14mm/gup: change GUP fast to use flags rather than a write 'bool'Ira Weiny
To facilitate additional options to get_user_pages_fast() change the singular write parameter to be gup_flags. This patch does not change any functionality. New functionality will follow in subsequent patches. Some of the get_user_pages_fast() call sites were unchanged because they already passed FOLL_WRITE or 0 for the write parameter. NOTE: It was suggested to change the ordering of the get_user_pages_fast() arguments to ensure that callers were converted. This breaks the current GUP call site convention of having the returned pages be the final parameter. So the suggestion was rejected. Link: http://lkml.kernel.org/r/20190328084422.29911-4-ira.weiny@intel.com Link: http://lkml.kernel.org/r/20190317183438.2057-4-ira.weiny@intel.com Signed-off-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Mike Marshall <hubcap@omnibond.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Dan Williams <dan.j.williams@intel.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Hogan <jhogan@kernel.org> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: John Hubbard <jhubbard@nvidia.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Rich Felker <dalias@libc.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-05-05net: rds: fix spelling mistake "syctl" -> "sysctl"Colin Ian King
There is a spelling mistake in a pr_warn warning. Fix it. Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-01rds: ib: force endiannes annotationNicholas Mc Guire
While the endiannes is being handled correctly as indicated by the comment above the offending line - sparse was unhappy with the missing annotation as be64_to_cpu() expects a __be64 argument. To mitigate this annotation all involved variables are changed to a consistent __le64 and the conversion to uint64_t delayed to the call to rds_cong_map_updated(). Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org> Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-24net: rds: exchange of 8K and 1M poolZhu Yanjun
Before the commit 490ea5967b0d ("RDS: IB: move FMR code to its own file"), when the dirty_count is greater than 9/10 of max_items of 8K pool, 1M pool is used, Vice versa. After the commit 490ea5967b0d ("RDS: IB: move FMR code to its own file"), the above is removed. When we make the following tests. Server: rds-stress -r 1.1.1.16 -D 1M Client: rds-stress -r 1.1.1.14 -s 1.1.1.16 -D 1M The following will appear. " connecting to 1.1.1.16:4000 negotiated options, tasks will start in 2 seconds Starting up..header from 1.1.1.166:4001 to id 4001 bogus .. tsks tx/s rx/s tx+rx K/s mbi K/s mbo K/s tx us/c rtt us cpu % 1 0 0 0.00 0.00 0.00 0.00 0.00 -1.00 1 0 0 0.00 0.00 0.00 0.00 0.00 -1.00 1 0 0 0.00 0.00 0.00 0.00 0.00 -1.00 1 0 0 0.00 0.00 0.00 0.00 0.00 -1.00 1 0 0 0.00 0.00 0.00 0.00 0.00 -1.00 ... " So this exchange between 8K and 1M pool is added back. Fixes: commit 490ea5967b0d ("RDS: IB: move FMR code to its own file") Signed-off-by: Zhu Yanjun <yanjun.zhu@oracle.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-12net/rds: Check address length before reading address familyTetsuo Handa
syzbot is reporting uninitialized value at rds_connect() [1] and rds_bind() [2]. This is because syzbot is passing ulen == 0 whereas these functions expect that it is safe to access sockaddr->family field in order to determine minimal address length for validation. [1] https://syzkaller.appspot.com/bug?id=f4e61c010416c1e6f0fa3ffe247561b60a50ad71 [2] https://syzkaller.appspot.com/bug?id=a4bf9e41b7e055c3823fdcd83e8c58ca7270e38f Reported-by: syzbot <syzbot+0049bebbf3042dbd2e8f@syzkaller.appspotmail.com> Reported-by: syzbot <syzbot+915c9f99f3dbc4bd6cd1@syzkaller.appspotmail.com> Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-28net: rds: force to destroy connection if t_sock is NULL in rds_tcp_kill_sock().Mao Wenan
When it is to cleanup net namespace, rds_tcp_exit_net() will call rds_tcp_kill_sock(), if t_sock is NULL, it will not call rds_conn_destroy(), rds_conn_path_destroy() and rds_tcp_conn_free() to free connection, and the worker cp_conn_w is not stopped, afterwards the net is freed in net_drop_ns(); While cp_conn_w rds_connect_worker() will call rds_tcp_conn_path_connect() and reference 'net' which has already been freed. In rds_tcp_conn_path_connect(), rds_tcp_set_callbacks() will set t_sock = sock before sock->ops->connect, but if connect() is failed, it will call rds_tcp_restore_callbacks() and set t_sock = NULL, if connect is always failed, rds_connect_worker() will try to reconnect all the time, so rds_tcp_kill_sock() will never to cancel worker cp_conn_w and free the connections. Therefore, the condition !tc->t_sock is not needed if it is going to do cleanup_net->rds_tcp_exit_net->rds_tcp_kill_sock, because tc->t_sock is always NULL, and there is on other path to cancel cp_conn_w and free connection. So this patch is to fix this. rds_tcp_kill_sock(): ... if (net != c_net || !tc->t_sock) ... Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> ================================================================== BUG: KASAN: use-after-free in inet_create+0xbcc/0xd28 net/ipv4/af_inet.c:340 Read of size 4 at addr ffff8003496a4684 by task kworker/u8:4/3721 CPU: 3 PID: 3721 Comm: kworker/u8:4 Not tainted 5.1.0 #11 Hardware name: linux,dummy-virt (DT) Workqueue: krdsd rds_connect_worker Call trace: dump_backtrace+0x0/0x3c0 arch/arm64/kernel/time.c:53 show_stack+0x28/0x38 arch/arm64/kernel/traps.c:152 __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x120/0x188 lib/dump_stack.c:113 print_address_description+0x68/0x278 mm/kasan/report.c:253 kasan_report_error mm/kasan/report.c:351 [inline] kasan_report+0x21c/0x348 mm/kasan/report.c:409 __asan_report_load4_noabort+0x30/0x40 mm/kasan/report.c:429 inet_create+0xbcc/0xd28 net/ipv4/af_inet.c:340 __sock_create+0x4f8/0x770 net/socket.c:1276 sock_create_kern+0x50/0x68 net/socket.c:1322 rds_tcp_conn_path_connect+0x2b4/0x690 net/rds/tcp_connect.c:114 rds_connect_worker+0x108/0x1d0 net/rds/threads.c:175 process_one_work+0x6e8/0x1700 kernel/workqueue.c:2153 worker_thread+0x3b0/0xdd0 kernel/workqueue.c:2296 kthread+0x2f0/0x378 kernel/kthread.c:255 ret_from_fork+0x10/0x18 arch/arm64/kernel/entry.S:1117 Allocated by task 687: save_stack mm/kasan/kasan.c:448 [inline] set_track mm/kasan/kasan.c:460 [inline] kasan_kmalloc+0xd4/0x180 mm/kasan/kasan.c:553 kasan_slab_alloc+0x14/0x20 mm/kasan/kasan.c:490 slab_post_alloc_hook mm/slab.h:444 [inline] slab_alloc_node mm/slub.c:2705 [inline] slab_alloc mm/slub.c:2713 [inline] kmem_cache_alloc+0x14c/0x388 mm/slub.c:2718 kmem_cache_zalloc include/linux/slab.h:697 [inline] net_alloc net/core/net_namespace.c:384 [inline] copy_net_ns+0xc4/0x2d0 net/core/net_namespace.c:424 create_new_namespaces+0x300/0x658 kernel/nsproxy.c:107 unshare_nsproxy_namespaces+0xa0/0x198 kernel/nsproxy.c:206 ksys_unshare+0x340/0x628 kernel/fork.c:2577 __do_sys_unshare kernel/fork.c:2645 [inline] __se_sys_unshare kernel/fork.c:2643 [inline] __arm64_sys_unshare+0x38/0x58 kernel/fork.c:2643 __invoke_syscall arch/arm64/kernel/syscall.c:35 [inline] invoke_syscall arch/arm64/kernel/syscall.c:47 [inline] el0_svc_common+0x168/0x390 arch/arm64/kernel/syscall.c:83 el0_svc_handler+0x60/0xd0 arch/arm64/kernel/syscall.c:129 el0_svc+0x8/0xc arch/arm64/kernel/entry.S:960 Freed by task 264: save_stack mm/kasan/kasan.c:448 [inline] set_track mm/kasan/kasan.c:460 [inline] __kasan_slab_free+0x114/0x220 mm/kasan/kasan.c:521 kasan_slab_free+0x10/0x18 mm/kasan/kasan.c:528 slab_free_hook mm/slub.c:1370 [inline] slab_free_freelist_hook mm/slub.c:1397 [inline] slab_free mm/slub.c:2952 [inline] kmem_cache_free+0xb8/0x3a8 mm/slub.c:2968 net_free net/core/net_namespace.c:400 [inline] net_drop_ns.part.6+0x78/0x90 net/core/net_namespace.c:407 net_drop_ns net/core/net_namespace.c:406 [inline] cleanup_net+0x53c/0x6d8 net/core/net_namespace.c:569 process_one_work+0x6e8/0x1700 kernel/workqueue.c:2153 worker_thread+0x3b0/0xdd0 kernel/workqueue.c:2296 kthread+0x2f0/0x378 kernel/kthread.c:255 ret_from_fork+0x10/0x18 arch/arm64/kernel/entry.S:1117 The buggy address belongs to the object at ffff8003496a3f80 which belongs to the cache net_namespace of size 7872 The buggy address is located 1796 bytes inside of 7872-byte region [ffff8003496a3f80, ffff8003496a5e40) The buggy address belongs to the page: page:ffff7e000d25a800 count:1 mapcount:0 mapping:ffff80036ce4b000 index:0x0 compound_mapcount: 0 flags: 0xffffe0000008100(slab|head) raw: 0ffffe0000008100 dead000000000100 dead000000000200 ffff80036ce4b000 raw: 0000000000000000 0000000080040004 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8003496a4580: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff8003496a4600: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb >ffff8003496a4680: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff8003496a4700: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff8003496a4780: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ================================================================== Fixes: 467fa15356ac("RDS-TCP: Support multiple RDS-TCP listen endpoints, one per netns.") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Mao Wenan <maowenan@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-09Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdmaLinus Torvalds
Pull rdma updates from Jason Gunthorpe: "This has been a slightly more active cycle than normal with ongoing core changes and quite a lot of collected driver updates. - Various driver fixes for bnxt_re, cxgb4, hns, mlx5, pvrdma, rxe - A new data transfer mode for HFI1 giving higher performance - Significant functional and bug fix update to the mlx5 On-Demand-Paging MR feature - A chip hang reset recovery system for hns - Change mm->pinned_vm to an atomic64 - Update bnxt_re to support a new 57500 chip - A sane netlink 'rdma link add' method for creating rxe devices and fixing the various unregistration race conditions in rxe's unregister flow - Allow lookup up objects by an ID over netlink - Various reworking of the core to driver interface: - drivers should not assume umem SGLs are in PAGE_SIZE chunks - ucontext is accessed via udata not other means - start to make the core code responsible for object memory allocation - drivers should convert struct device to struct ib_device via a helper - drivers have more tools to avoid use after unregister problems" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (280 commits) net/mlx5: ODP support for XRC transport is not enabled by default in FW IB/hfi1: Close race condition on user context disable and close RDMA/umem: Revert broken 'off by one' fix RDMA/umem: minor bug fix in error handling path RDMA/hns: Use GFP_ATOMIC in hns_roce_v2_modify_qp cxgb4: kfree mhp after the debug print IB/rdmavt: Fix concurrency panics in QP post_send and modify to error IB/rdmavt: Fix loopback send with invalidate ordering IB/iser: Fix dma_nents type definition IB/mlx5: Set correct write permissions for implicit ODP MR bnxt_re: Clean cq for kernel consumers only RDMA/uverbs: Don't do double free of allocated PD RDMA: Handle ucontext allocations by IB/core RDMA/core: Fix a WARN() message bnxt_re: fix the regression due to changes in alloc_pbl IB/mlx4: Increase the timeout for CM cache IB/core: Abort page fault handler silently during owning process exit IB/mlx5: Validate correct PD before prefetch MR IB/mlx5: Protect against prefetch of invalid MR RDMA/uverbs: Store PR pointer before it is overwritten ...
2019-02-08Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
An ipvlan bug fix in 'net' conflicted with the abstraction away of the IPV6 specific support in 'net-next'. Similarly, a bug fix for mlx5 in 'net' conflicted with the flow action conversion in 'net-next'. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-04rds: rdma: update rdma transport for tosSantosh Shilimkar
For RDMA transports, RDS TOS is an extension of IB QoS(Annex A13) to provide clients the ability to segregate traffic flows for different type of data. RDMA CM abstract it for ULPs using rdma_set_service_type(). Internally, each traffic flow is represented by a connection with all of its independent resources like that of a normal connection, and is differentiated by service type. In other words, there can be multiple qp connections between an IP pair and each supports a unique service type. The feature has been added from RDSv4.1 onwards and supports rolling upgrades. RDMA connection metadata also carries the tos information to set up SL on end to end context. The original code was developed by Bang Nguyen in downstream kernel back in 2.6.32 kernel days and it has evolved over period of time. Reviewed-by: Sowmini Varadhan <sowmini.varadhan@oracle.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> [yanjun.zhu@oracle.com: Adapted original patch with ipv6 changes] Signed-off-by: Zhu Yanjun <yanjun.zhu@oracle.com>
2019-02-04rds: add transport specific tos_map hookSantosh Shilimkar
RDMA transport maps user tos to underline virtual lanes(VL) for IB or DSCP values. RDMA CM transport abstract thats for RDS. TCP transport makes use of default priority 0 and maps all user tos values to it. Reviewed-by: Sowmini Varadhan <sowmini.varadhan@oracle.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> [yanjun.zhu@oracle.com: Adapted original patch with ipv6 changes] Signed-off-by: Zhu Yanjun <yanjun.zhu@oracle.com>
2019-02-04rds: add type of service(tos) infrastructureSantosh Shilimkar
RDS Service type (TOS) is user-defined and needs to be configured via RDS IOCTL interface. It must be set before initiating any traffic and once set the TOS can not be changed. All out-going traffic from the socket will be associated with its TOS. Reviewed-by: Sowmini Varadhan <sowmini.varadhan@oracle.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> [yanjun.zhu@oracle.com: Adapted original patch with ipv6 changes] Signed-off-by: Zhu Yanjun <yanjun.zhu@oracle.com>
2019-02-04rds: rdma: add consumer rejectSantosh Shilimkar
For legacy protocol version incompatibility with non linux RDS, consumer reject reason being used to convey it to peer. But the choice of reject reason value as '1' was really poor. Anyway for interoperability reasons with shipping products, it needs to be supported. For any future versions, properly encoded reject reason should to be used. Reviewed-by: Sowmini Varadhan <sowmini.varadhan@oracle.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> [yanjun.zhu@oracle.com: Adapted original patch with ipv6 changes] Signed-off-by: Zhu Yanjun <yanjun.zhu@oracle.com>
2019-02-04rds: make v3.1 as compat versionSantosh Shilimkar
Mark RDSv3.1 as compat version and add v4.1 version macro's. Subsequent patches enable TOS(Type of Service) feature which is tied with v4.1 for RDMA transport. Reviewed-by: Sowmini Varadhan <sowmini.varadhan@oracle.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> [yanjun.zhu@oracle.com: Adapted original patch with ipv6 changes] Signed-off-by: Zhu Yanjun <yanjun.zhu@oracle.com>
2019-02-04Merge tag 'v5.0-rc5' into rdma.git for-nextJason Gunthorpe
Linux 5.0-rc5 Needed to merge the include/uapi changes so we have an up to date single-tree for these files. Patches already posted are also expected to need this for dependencies.
2019-02-04IB/core: Remove ib_sg_dma_address() and ib_sg_dma_len()Bart Van Assche
Keeping single line wrapper functions is not useful. Hence remove the ib_sg_dma_address() and ib_sg_dma_len() functions. This patch does not change any functionality. Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-02-03socket: Add SO_TIMESTAMP[NS]_NEWDeepa Dinamani
Add SO_TIMESTAMP_NEW and SO_TIMESTAMPNS_NEW variants of socket timestamp options. These are the y2038 safe versions of the SO_TIMESTAMP_OLD and SO_TIMESTAMPNS_OLD for all architectures. Note that the format of scm_timestamping.ts[0] is not changed in this patch. Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com> Acked-by: Willem de Bruijn <willemb@google.com> Cc: jejb@parisc-linux.org Cc: ralf@linux-mips.org Cc: rth@twiddle.net Cc: linux-alpha@vger.kernel.org Cc: linux-mips@linux-mips.org Cc: linux-parisc@vger.kernel.org Cc: linux-rdma@vger.kernel.org Cc: netdev@vger.kernel.org Cc: sparclinux@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-03socket: Use old_timeval types for socket timestampsDeepa Dinamani
As part of y2038 solution, all internal uses of struct timeval are replaced by struct __kernel_old_timeval and struct compat_timeval by struct old_timeval32. Make socket timestamps use these new types. This is mainly to be able to verify that the kernel build is y2038 safe when such non y2038 safe types are not supported anymore. Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com> Acked-by: Willem de Bruijn <willemb@google.com> Cc: isdn@linux-pingi.de Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-03sockopt: Rename SO_TIMESTAMP* to SO_TIMESTAMP*_OLDDeepa Dinamani
SO_TIMESTAMP, SO_TIMESTAMPNS and SO_TIMESTAMPING options, the way they are currently defined, are not y2038 safe. Subsequent patches in the series add new y2038 safe versions of these options which provide 64 bit timestamps on all architectures uniformly. Hence, rename existing options with OLD tag suffixes. Also note that kernel will not use the untagged SO_TIMESTAMP* and SCM_TIMESTAMP* options internally anymore. Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com> Acked-by: Willem de Bruijn <willemb@google.com> Cc: deller@gmx.de Cc: dhowells@redhat.com Cc: jejb@parisc-linux.org Cc: ralf@linux-mips.org Cc: rth@twiddle.net Cc: linux-afs@lists.infradead.org Cc: linux-alpha@vger.kernel.org Cc: linux-arch@vger.kernel.org Cc: linux-mips@linux-mips.org Cc: linux-parisc@vger.kernel.org Cc: linux-rdma@vger.kernel.org Cc: sparclinux@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-31rds: fix refcount bug in rds_sock_addrefEric Dumazet
syzbot was able to catch a bug in rds [1] The issue here is that the socket might be found in a hash table but that its refcount has already be set to 0 by another cpu. We need to use refcount_inc_not_zero() to be safe here. [1] refcount_t: increment on 0; use-after-free. WARNING: CPU: 1 PID: 23129 at lib/refcount.c:153 refcount_inc_checked lib/refcount.c:153 [inline] WARNING: CPU: 1 PID: 23129 at lib/refcount.c:153 refcount_inc_checked+0x61/0x70 lib/refcount.c:151 Kernel panic - not syncing: panic_on_warn set ... CPU: 1 PID: 23129 Comm: syz-executor3 Not tainted 5.0.0-rc4+ #53 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x1db/0x2d0 lib/dump_stack.c:113 panic+0x2cb/0x65c kernel/panic.c:214 __warn.cold+0x20/0x48 kernel/panic.c:571 report_bug+0x263/0x2b0 lib/bug.c:186 fixup_bug arch/x86/kernel/traps.c:178 [inline] fixup_bug arch/x86/kernel/traps.c:173 [inline] do_error_trap+0x11b/0x200 arch/x86/kernel/traps.c:271 do_invalid_op+0x37/0x50 arch/x86/kernel/traps.c:290 invalid_op+0x14/0x20 arch/x86/entry/entry_64.S:973 RIP: 0010:refcount_inc_checked lib/refcount.c:153 [inline] RIP: 0010:refcount_inc_checked+0x61/0x70 lib/refcount.c:151 Code: 1d 51 63 c8 06 31 ff 89 de e8 eb 1b f2 fd 84 db 75 dd e8 a2 1a f2 fd 48 c7 c7 60 9f 81 88 c6 05 31 63 c8 06 01 e8 af 65 bb fd <0f> 0b eb c1 90 66 2e 0f 1f 84 00 00 00 00 00 55 48 89 e5 41 54 49 RSP: 0018:ffff8880a0cbf1e8 EFLAGS: 00010282 RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffffc90006113000 RDX: 000000000001047d RSI: ffffffff81685776 RDI: 0000000000000005 RBP: ffff8880a0cbf1f8 R08: ffff888097c9e100 R09: ffffed1015ce5021 R10: ffffed1015ce5020 R11: ffff8880ae728107 R12: ffff8880723c20c0 R13: ffff8880723c24b0 R14: dffffc0000000000 R15: ffffed1014197e64 sock_hold include/net/sock.h:647 [inline] rds_sock_addref+0x19/0x20 net/rds/af_rds.c:675 rds_find_bound+0x97c/0x1080 net/rds/bind.c:82 rds_recv_incoming+0x3be/0x1430 net/rds/recv.c:362 rds_loop_xmit+0xf3/0x2a0 net/rds/loop.c:96 rds_send_xmit+0x1355/0x2a10 net/rds/send.c:355 rds_sendmsg+0x323c/0x44e0 net/rds/send.c:1368 sock_sendmsg_nosec net/socket.c:621 [inline] sock_sendmsg+0xdd/0x130 net/socket.c:631 __sys_sendto+0x387/0x5f0 net/socket.c:1788 __do_sys_sendto net/socket.c:1800 [inline] __se_sys_sendto net/socket.c:1796 [inline] __x64_sys_sendto+0xe1/0x1a0 net/socket.c:1796 do_syscall_64+0x1a3/0x800 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x458089 Code: 6d b7 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 3b b7 fb ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007fc266df8c78 EFLAGS: 00000246 ORIG_RAX: 000000000000002c RAX: ffffffffffffffda RBX: 0000000000000006 RCX: 0000000000458089 RDX: 0000000000000000 RSI: 00000000204b3fff RDI: 0000000000000005 RBP: 000000000073bf00 R08: 00000000202b4000 R09: 0000000000000010 R10: 0000000000000000 R11: 0000000000000246 R12: 00007fc266df96d4 R13: 00000000004c56e4 R14: 00000000004d94a8 R15: 00000000ffffffff Fixes: cc4dfb7f70a3 ("rds: fix two RCU related problems") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Cc: Sowmini Varadhan <sowmini.varadhan@oracle.com> Cc: Santosh Shilimkar <santosh.shilimkar@oracle.com> Cc: rds-devel@oss.oracle.com Cc: Cong Wang <xiyou.wangcong@gmail.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-07rds: use DIV_ROUND_UP instead of ceilJacob Wen
Yes indeed, DIV_ROUND_UP is in kernel.h. Signed-off-by: Jacob Wen <jian.w.wen@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking fixes from David Miller: "Several fixes here. Basically split down the line between newly introduced regressions and long existing problems: 1) Double free in tipc_enable_bearer(), from Cong Wang. 2) Many fixes to nf_conncount, from Florian Westphal. 3) op->get_regs_len() can throw an error, check it, from Yunsheng Lin. 4) Need to use GFP_ATOMIC in *_add_hash_mac_address() of fsl/fman driver, from Scott Wood. 5) Inifnite loop in fib_empty_table(), from Yue Haibing. 6) Use after free in ax25_fillin_cb(), from Cong Wang. 7) Fix socket locking in nr_find_socket(), also from Cong Wang. 8) Fix WoL wakeup enable in r8169, from Heiner Kallweit. 9) On 32-bit sock->sk_stamp is not thread-safe, from Deepa Dinamani. 10) Fix ptr_ring wrap during queue swap, from Cong Wang. 11) Missing shutdown callback in hinic driver, from Xue Chaojing. 12) Need to return NULL on error from ip6_neigh_lookup(), from Stefano Brivio. 13) BPF out of bounds speculation fixes from Daniel Borkmann" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (57 commits) ipv6: Consider sk_bound_dev_if when binding a socket to an address ipv6: Fix dump of specific table with strict checking bpf: add various test cases to selftests bpf: prevent out of bounds speculation on pointer arithmetic bpf: fix check_map_access smin_value test when pointer contains offset bpf: restrict unknown scalars of mixed signed bounds for unprivileged bpf: restrict stack pointer arithmetic for unprivileged bpf: restrict map value pointer arithmetic for unprivileged bpf: enable access to ax register also from verifier rewrite bpf: move tmp variable into ax register in interpreter bpf: move {prev_,}insn_idx into verifier env isdn: fix kernel-infoleak in capi_unlocked_ioctl ipv6: route: Fix return value of ip6_neigh_lookup() on neigh_create() error net/hamradio/6pack: use mod_timer() to rearm timers net-next/hinic:add shutdown callback net: hns3: call hns3_nic_net_open() while doing HNAE3_UP_CLIENT ip: validate header length on virtual device xmit tap: call skb_probe_transport_header after setting skb->dev ptr_ring: wrap back ->producer in __ptr_ring_swap_queue() net: rds: remove unnecessary NULL check ...
2019-01-01net: rds: remove unnecessary NULL checkZhu Yanjun
In kfree, the NULL check is done. Signed-off-by: Zhu Yanjun <yanjun.zhu@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-28Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdmaLinus Torvalds
Pull rdma updates from Jason Gunthorpe: "This has been a fairly typical cycle, with the usual sorts of driver updates. Several series continue to come through which improve and modernize various parts of the core code, and we finally are starting to get the uAPI command interface cleaned up. - Various driver fixes for bnxt_re, cxgb3/4, hfi1, hns, i40iw, mlx4, mlx5, qib, rxe, usnic - Rework the entire syscall flow for uverbs to be able to run over ioctl(). Finally getting past the historic bad choice to use write() for command execution - More functional coverage with the mlx5 'devx' user API - Start of the HFI1 series for 'TID RDMA' - SRQ support in the hns driver - Support for new IBTA defined 2x lane widths - A big series to consolidate all the driver function pointers into a big struct and have drivers provide a 'static const' version of the struct instead of open coding initialization - New 'advise_mr' uAPI to control device caching/loading of page tables - Support for inline data in SRPT - Modernize how umad uses the driver core and creates cdev's and sysfs files - First steps toward removing 'uobject' from the view of the drivers" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (193 commits) RDMA/srpt: Use kmem_cache_free() instead of kfree() RDMA/mlx5: Signedness bug in UVERBS_HANDLER() IB/uverbs: Signedness bug in UVERBS_HANDLER() IB/mlx5: Allocate the per-port Q counter shared when DEVX is supported IB/umad: Start using dev_groups of class IB/umad: Use class_groups and let core create class file IB/umad: Refactor code to use cdev_device_add() IB/umad: Avoid destroying device while it is accessed IB/umad: Simplify and avoid dynamic allocation of class IB/mlx5: Fix wrong error unwind IB/mlx4: Remove set but not used variable 'pd' RDMA/iwcm: Don't copy past the end of dev_name() string IB/mlx5: Fix long EEH recover time with NVMe offloads IB/mlx5: Simplify netdev unbinding IB/core: Move query port to ioctl RDMA/nldev: Expose port_cap_flags2 IB/core: uverbs copy to struct or zero helper IB/rxe: Reuse code which sets port state IB/rxe: Make counters thread safe IB/mlx5: Use the correct commands for UMEM and UCTX allocation ...
2018-12-19rds: Fix warning.David S. Miller
>> net/rds/send.c:1109:42: warning: Using plain integer as NULL pointer Fixes: ea010070d0a7 ("net/rds: fix warn in rds_message_alloc_sgs") Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-19net/rds: remove user triggered WARN_ON in rds_sendmsgshamir rabinovitch
per comment from Leon in rdma mailing list https://lkml.org/lkml/2018/10/31/312 : Please don't forget to remove user triggered WARN_ON. https://lwn.net/Articles/769365/ "Greg Kroah-Hartman raised the problem of core kernel API code that will use WARN_ON_ONCE() to complain about bad usage; that will not generate the desired result if WARN_ON_ONCE() is configured to crash the machine. He was told that the code should just call pr_warn() instead, and that the called function should return an error in such situations. It was generally agreed that any WARN_ON() or WARN_ON_ONCE() calls that can be triggered from user space need to be fixed." in addition harden rds_sendmsg to detect and overcome issues with invalid sg count and fail the sendmsg. Suggested-by: Leon Romanovsky <leon@kernel.org> Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: shamir rabinovitch <shamir.rabinovitch@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-19net/rds: fix warn in rds_message_alloc_sgsshamir rabinovitch
redundant copy_from_user in rds_sendmsg system call expose rds to issue where rds_rdma_extra_size walk the rds iovec and and calculate the number pf pages (sgs) it need to add to the tail of rds message and later rds_cmsg_rdma_args copy the rds iovec again and re calculate the same number and get different result causing WARN_ON in rds_message_alloc_sgs. fix this by doing the copy_from_user only once per rds_sendmsg system call. When issue occur the below dump is seen: WARNING: CPU: 0 PID: 19789 at net/rds/message.c:316 rds_message_alloc_sgs+0x10c/0x160 net/rds/message.c:316 Kernel panic - not syncing: panic_on_warn set ... CPU: 0 PID: 19789 Comm: syz-executor827 Not tainted 4.19.0-next-20181030+ #101 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x244/0x39d lib/dump_stack.c:113 panic+0x2ad/0x55c kernel/panic.c:188 __warn.cold.8+0x20/0x45 kernel/panic.c:540 report_bug+0x254/0x2d0 lib/bug.c:186 fixup_bug arch/x86/kernel/traps.c:178 [inline] do_error_trap+0x11b/0x200 arch/x86/kernel/traps.c:271 do_invalid_op+0x36/0x40 arch/x86/kernel/traps.c:290 invalid_op+0x14/0x20 arch/x86/entry/entry_64.S:969 RIP: 0010:rds_message_alloc_sgs+0x10c/0x160 net/rds/message.c:316 Code: c0 74 04 3c 03 7e 6c 44 01 ab 78 01 00 00 e8 2b 9e 35 fa 4c 89 e0 48 83 c4 08 5b 41 5c 41 5d 41 5e 41 5f 5d c3 e8 14 9e 35 fa <0f> 0b 31 ff 44 89 ee e8 18 9f 35 fa 45 85 ed 75 1b e8 fe 9d 35 fa RSP: 0018:ffff8801c51b7460 EFLAGS: 00010293 RAX: ffff8801bc412080 RBX: ffff8801d7bf4040 RCX: ffffffff8749c9e6 RDX: 0000000000000000 RSI: ffffffff8749ca5c RDI: 0000000000000004 RBP: ffff8801c51b7490 R08: ffff8801bc412080 R09: ffffed003b5c5b67 R10: ffffed003b5c5b67 R11: ffff8801dae2db3b R12: 0000000000000000 R13: 000000000007165c R14: 000000000007165c R15: 0000000000000005 rds_cmsg_rdma_args+0x82d/0x1510 net/rds/rdma.c:623 rds_cmsg_send net/rds/send.c:971 [inline] rds_sendmsg+0x19a2/0x3180 net/rds/send.c:1273 sock_sendmsg_nosec net/socket.c:622 [inline] sock_sendmsg+0xd5/0x120 net/socket.c:632 ___sys_sendmsg+0x7fd/0x930 net/socket.c:2117 __sys_sendmsg+0x11d/0x280 net/socket.c:2155 __do_sys_sendmsg net/socket.c:2164 [inline] __se_sys_sendmsg net/socket.c:2162 [inline] __x64_sys_sendmsg+0x78/0xb0 net/socket.c:2162 do_syscall_64+0x1b9/0x820 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x44a859 Code: e8 dc e6 ff ff 48 83 c4 18 c3 0f 1f 80 00 00 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 6b cb fb ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007f1d4710ada8 EFLAGS: 00000297 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 00000000006dcc28 RCX: 000000000044a859 RDX: 0000000000000000 RSI: 0000000020001600 RDI: 0000000000000003 RBP: 00000000006dcc20 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000297 R12: 00000000006dcc2c R13: 646e732f7665642f R14: 00007f1d4710b9c0 R15: 00000000006dcd2c Kernel Offset: disabled Rebooting in 86400 seconds.. Reported-by: syzbot+26de17458aeda9d305d8@syzkaller.appspotmail.com Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: shamir rabinovitch <shamir.rabinovitch@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-12RDMA: Start use ib_device_opsKamal Heib
Make all the required change to start use the ib_device_ops structure. Signed-off-by: Kamal Heib <kamalheib1@gmail.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-10-12Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts were easy to resolve using immediate context mostly, except the cls_u32.c one where I simply too the entire HEAD chunk. Signed-off-by: David S. Miller <davem@davemloft.net>