summaryrefslogtreecommitdiff
path: root/net/rds/send.c
AgeCommit message (Collapse)Author
2019-09-05Convert usage of IN_MULTICAST to ipv4_is_multicastDave Taht
IN_MULTICAST's primary intent is as a uapi macro. Elsewhere in the kernel we use ipv4_is_multicast consistently. This patch unifies linux's multicast checks to use that function rather than this macro. Signed-off-by: Dave Taht <dave.taht@gmail.com> Reviewed-by: Toke Høiland-Jørgensen <toke@toke.dk> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-15rds: check for excessive looping in rds_send_xmitAndy Grover
Original commit from 2011 updated to include a change by Yuval Shaia <yuval.shaia@oracle.com> that adds a new statistic counter "send_stuck_rm" to capture the messages looping exessively in the send path. Signed-off-by: Gerd Rausch <gerd.rausch@oracle.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-09rds: fix reordering with composite message notificationSantosh Shilimkar
RDS composite message(rdma + control) user notification needs to be triggered once the full message is delivered and such a fix was added as part of commit 941f8d55f6d61 ("RDS: RDMA: Fix the composite message user notification"). But rds_send_remove_from_sock is missing data part notify check and hence at times the user don't get notification which isn't desirable. One way is to fix the rds_send_remove_from_sock to check of that case but considering the ordering complexity with completion handler and rdma + control messages are always dispatched back to back in same send context, just delaying the signaled completion on rmda work request also gets the desired behaviour. i.e Notifying application only after RDMA + control message send completes. So patch updates the earlier fix with this approach. The delay signaling completions of rdma op till the control message send completes fix was done by Venkat Venkatsubra in downstream kernel. Reviewed-and-tested-by: Zhu Yanjun <yanjun.zhu@oracle.com> Reviewed-by: Gerd Rausch <gerd.rausch@oracle.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
2019-02-04rds: rdma: update rdma transport for tosSantosh Shilimkar
For RDMA transports, RDS TOS is an extension of IB QoS(Annex A13) to provide clients the ability to segregate traffic flows for different type of data. RDMA CM abstract it for ULPs using rdma_set_service_type(). Internally, each traffic flow is represented by a connection with all of its independent resources like that of a normal connection, and is differentiated by service type. In other words, there can be multiple qp connections between an IP pair and each supports a unique service type. The feature has been added from RDSv4.1 onwards and supports rolling upgrades. RDMA connection metadata also carries the tos information to set up SL on end to end context. The original code was developed by Bang Nguyen in downstream kernel back in 2.6.32 kernel days and it has evolved over period of time. Reviewed-by: Sowmini Varadhan <sowmini.varadhan@oracle.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> [yanjun.zhu@oracle.com: Adapted original patch with ipv6 changes] Signed-off-by: Zhu Yanjun <yanjun.zhu@oracle.com>
2019-02-04rds: add type of service(tos) infrastructureSantosh Shilimkar
RDS Service type (TOS) is user-defined and needs to be configured via RDS IOCTL interface. It must be set before initiating any traffic and once set the TOS can not be changed. All out-going traffic from the socket will be associated with its TOS. Reviewed-by: Sowmini Varadhan <sowmini.varadhan@oracle.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> [yanjun.zhu@oracle.com: Adapted original patch with ipv6 changes] Signed-off-by: Zhu Yanjun <yanjun.zhu@oracle.com>
2019-01-07rds: use DIV_ROUND_UP instead of ceilJacob Wen
Yes indeed, DIV_ROUND_UP is in kernel.h. Signed-off-by: Jacob Wen <jian.w.wen@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-19rds: Fix warning.David S. Miller
>> net/rds/send.c:1109:42: warning: Using plain integer as NULL pointer Fixes: ea010070d0a7 ("net/rds: fix warn in rds_message_alloc_sgs") Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-19net/rds: remove user triggered WARN_ON in rds_sendmsgshamir rabinovitch
per comment from Leon in rdma mailing list https://lkml.org/lkml/2018/10/31/312 : Please don't forget to remove user triggered WARN_ON. https://lwn.net/Articles/769365/ "Greg Kroah-Hartman raised the problem of core kernel API code that will use WARN_ON_ONCE() to complain about bad usage; that will not generate the desired result if WARN_ON_ONCE() is configured to crash the machine. He was told that the code should just call pr_warn() instead, and that the called function should return an error in such situations. It was generally agreed that any WARN_ON() or WARN_ON_ONCE() calls that can be triggered from user space need to be fixed." in addition harden rds_sendmsg to detect and overcome issues with invalid sg count and fail the sendmsg. Suggested-by: Leon Romanovsky <leon@kernel.org> Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: shamir rabinovitch <shamir.rabinovitch@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-19net/rds: fix warn in rds_message_alloc_sgsshamir rabinovitch
redundant copy_from_user in rds_sendmsg system call expose rds to issue where rds_rdma_extra_size walk the rds iovec and and calculate the number pf pages (sgs) it need to add to the tail of rds message and later rds_cmsg_rdma_args copy the rds iovec again and re calculate the same number and get different result causing WARN_ON in rds_message_alloc_sgs. fix this by doing the copy_from_user only once per rds_sendmsg system call. When issue occur the below dump is seen: WARNING: CPU: 0 PID: 19789 at net/rds/message.c:316 rds_message_alloc_sgs+0x10c/0x160 net/rds/message.c:316 Kernel panic - not syncing: panic_on_warn set ... CPU: 0 PID: 19789 Comm: syz-executor827 Not tainted 4.19.0-next-20181030+ #101 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x244/0x39d lib/dump_stack.c:113 panic+0x2ad/0x55c kernel/panic.c:188 __warn.cold.8+0x20/0x45 kernel/panic.c:540 report_bug+0x254/0x2d0 lib/bug.c:186 fixup_bug arch/x86/kernel/traps.c:178 [inline] do_error_trap+0x11b/0x200 arch/x86/kernel/traps.c:271 do_invalid_op+0x36/0x40 arch/x86/kernel/traps.c:290 invalid_op+0x14/0x20 arch/x86/entry/entry_64.S:969 RIP: 0010:rds_message_alloc_sgs+0x10c/0x160 net/rds/message.c:316 Code: c0 74 04 3c 03 7e 6c 44 01 ab 78 01 00 00 e8 2b 9e 35 fa 4c 89 e0 48 83 c4 08 5b 41 5c 41 5d 41 5e 41 5f 5d c3 e8 14 9e 35 fa <0f> 0b 31 ff 44 89 ee e8 18 9f 35 fa 45 85 ed 75 1b e8 fe 9d 35 fa RSP: 0018:ffff8801c51b7460 EFLAGS: 00010293 RAX: ffff8801bc412080 RBX: ffff8801d7bf4040 RCX: ffffffff8749c9e6 RDX: 0000000000000000 RSI: ffffffff8749ca5c RDI: 0000000000000004 RBP: ffff8801c51b7490 R08: ffff8801bc412080 R09: ffffed003b5c5b67 R10: ffffed003b5c5b67 R11: ffff8801dae2db3b R12: 0000000000000000 R13: 000000000007165c R14: 000000000007165c R15: 0000000000000005 rds_cmsg_rdma_args+0x82d/0x1510 net/rds/rdma.c:623 rds_cmsg_send net/rds/send.c:971 [inline] rds_sendmsg+0x19a2/0x3180 net/rds/send.c:1273 sock_sendmsg_nosec net/socket.c:622 [inline] sock_sendmsg+0xd5/0x120 net/socket.c:632 ___sys_sendmsg+0x7fd/0x930 net/socket.c:2117 __sys_sendmsg+0x11d/0x280 net/socket.c:2155 __do_sys_sendmsg net/socket.c:2164 [inline] __se_sys_sendmsg net/socket.c:2162 [inline] __x64_sys_sendmsg+0x78/0xb0 net/socket.c:2162 do_syscall_64+0x1b9/0x820 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x44a859 Code: e8 dc e6 ff ff 48 83 c4 18 c3 0f 1f 80 00 00 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 6b cb fb ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007f1d4710ada8 EFLAGS: 00000297 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 00000000006dcc28 RCX: 000000000044a859 RDX: 0000000000000000 RSI: 0000000020001600 RDI: 0000000000000003 RBP: 00000000006dcc20 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000297 R12: 00000000006dcc2c R13: 646e732f7665642f R14: 00007f1d4710b9c0 R15: 00000000006dcd2c Kernel Offset: disabled Rebooting in 86400 seconds.. Reported-by: syzbot+26de17458aeda9d305d8@syzkaller.appspotmail.com Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: shamir rabinovitch <shamir.rabinovitch@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-10rds: RDS (tcp) hangs on sendto() to unresponding addressKa-Cheong Poon
In rds_send_mprds_hash(), if the calculated hash value is non-zero and the MPRDS connections are not yet up, it will wait. But it should not wait if the send is non-blocking. In this case, it should just use the base c_path for sending the message. Signed-off-by: Ka-Cheong Poon <ka-cheong.poon@oracle.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-02Merge ra.kernel.org:/pub/scm/linux/kernel/git/davem/netDavid S. Miller
The BTF conflicts were simple overlapping changes. The virtio_net conflict was an overlap of a fix of statistics counter, happening alongisde a move over to a bonafide statistics structure rather than counting value on the stack. Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-01rds: Remove IPv6 dependencyKa-Cheong Poon
This patch removes the IPv6 dependency from RDS. Signed-off-by: Ka-Cheong Poon <ka-cheong.poon@oracle.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-26RDS: RDMA: Fix the NULL-ptr deref in rds_ib_get_mrAvinash Repaka
Registration of a memory region(MR) through FRMR/fastreg(unlike FMR) needs a connection/qp. With a proxy qp, this dependency on connection will be removed, but that needs more infrastructure patches, which is a work in progress. As an intermediate fix, the get_mr returns EOPNOTSUPP when connection details are not populated. The MR registration through sendmsg() will continue to work even with fast registration, since connection in this case is formed upfront. This patch fixes the following crash: kasan: GPF could be caused by NULL-ptr deref or user memory access general protection fault: 0000 [#1] SMP KASAN Modules linked in: CPU: 1 PID: 4244 Comm: syzkaller468044 Not tainted 4.16.0-rc6+ #361 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:rds_ib_get_mr+0x5c/0x230 net/rds/ib_rdma.c:544 RSP: 0018:ffff8801b059f890 EFLAGS: 00010202 RAX: dffffc0000000000 RBX: ffff8801b07e1300 RCX: ffffffff8562d96e RDX: 000000000000000d RSI: 0000000000000001 RDI: 0000000000000068 RBP: ffff8801b059f8b8 R08: ffffed0036274244 R09: ffff8801b13a1200 R10: 0000000000000004 R11: ffffed0036274243 R12: ffff8801b13a1200 R13: 0000000000000001 R14: ffff8801ca09fa9c R15: 0000000000000000 FS: 00007f4d050af700(0000) GS:ffff8801db300000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f4d050aee78 CR3: 00000001b0d9b006 CR4: 00000000001606e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: __rds_rdma_map+0x710/0x1050 net/rds/rdma.c:271 rds_get_mr_for_dest+0x1d4/0x2c0 net/rds/rdma.c:357 rds_setsockopt+0x6cc/0x980 net/rds/af_rds.c:347 SYSC_setsockopt net/socket.c:1849 [inline] SyS_setsockopt+0x189/0x360 net/socket.c:1828 do_syscall_64+0x281/0x940 arch/x86/entry/common.c:287 entry_SYSCALL_64_after_hwframe+0x42/0xb7 RIP: 0033:0x4456d9 RSP: 002b:00007f4d050aedb8 EFLAGS: 00000246 ORIG_RAX: 0000000000000036 RAX: ffffffffffffffda RBX: 00000000006dac3c RCX: 00000000004456d9 RDX: 0000000000000007 RSI: 0000000000000114 RDI: 0000000000000004 RBP: 00000000006dac38 R08: 00000000000000a0 R09: 0000000000000000 R10: 0000000020000380 R11: 0000000000000246 R12: 0000000000000000 R13: 00007fffbfb36d6f R14: 00007f4d050af9c0 R15: 0000000000000005 Code: fa 48 c1 ea 03 80 3c 02 00 0f 85 cc 01 00 00 4c 8b bb 80 04 00 00 48 b8 00 00 00 00 00 fc ff df 49 8d 7f 68 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 9c 01 00 00 4d 8b 7f 68 48 b8 00 00 00 00 00 RIP: rds_ib_get_mr+0x5c/0x230 net/rds/ib_rdma.c:544 RSP: ffff8801b059f890 ---[ end trace 7e1cea13b85473b0 ]--- Reported-by: syzbot+b51c77ef956678a65834@syzkaller.appspotmail.com Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: Avinash Repaka <avinash.repaka@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-25rds: send: Fix dead code in rds_sendmsgGustavo A. R. Silva
Currently, code at label *out* is unreachable. Fix this by updating variable *ret* with -EINVAL, so the jump to *out* can be properly executed instead of directly returning from function. Addresses-Coverity-ID: 1472059 ("Structurally dead code") Fixes: 1e2b44e78eea ("rds: Enable RDS IPv6 support") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Acked-by: Sowmini Varadhan <sowmini.varadhan@oracle.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-23rds: Enable RDS IPv6 supportKa-Cheong Poon
This patch enables RDS to use IPv6 addresses. For RDS/TCP, the listener is now an IPv6 endpoint which accepts both IPv4 and IPv6 connection requests. RDS/RDMA/IB uses a private data (struct rds_ib_connect_private) exchange between endpoints at RDS connection establishment time to support RDMA. This private data exchange uses a 32 bit integer to represent an IP address. This needs to be changed in order to support IPv6. A new private data struct rds6_ib_connect_private is introduced to handle this. To ensure backward compatibility, an IPv6 capable RDS stack uses another RDMA listener port (RDS_CM_PORT) to accept IPv6 connection. And it continues to use the original RDS_PORT for IPv4 RDS connections. When it needs to communicate with an IPv6 peer, it uses the RDS_CM_PORT to send the connection set up request. v5: Fixed syntax problem (David Miller). v4: Changed port history comments in rds.h (Sowmini Varadhan). v3: Added support to set up IPv4 connection using mapped address (David Miller). Added support to set up connection between link local and non-link addresses. Various review comments from Santosh Shilimkar and Sowmini Varadhan. v2: Fixed bound and peer address scope mismatched issue. Added back rds_connect() IPv6 changes. Signed-off-by: Ka-Cheong Poon <ka-cheong.poon@oracle.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-23rds: Changing IP address internal representation to struct in6_addrKa-Cheong Poon
This patch changes the internal representation of an IP address to use struct in6_addr. IPv4 address is stored as an IPv4 mapped address. All the functions which take an IP address as argument are also changed to use struct in6_addr. But RDS socket layer is not modified such that it still does not accept IPv6 address from an application. And RDS layer does not accept nor initiate IPv6 connections. v2: Fixed sparse warnings. Signed-off-by: Ka-Cheong Poon <ka-cheong.poon@oracle.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-11rds: MP-RDS may use an invalid c_pathKa-Cheong Poon
rds_sendmsg() calls rds_send_mprds_hash() to find a c_path to use to send a message. Suppose the RDS connection is not yet up. In rds_send_mprds_hash(), it does if (conn->c_npaths == 0) wait_event_interruptible(conn->c_hs_waitq, (conn->c_npaths != 0)); If it is interrupted before the connection is set up, rds_send_mprds_hash() will return a non-zero hash value. Hence rds_sendmsg() will use a non-zero c_path to send the message. But if the RDS connection ends up to be non-MP capable, the message will be lost as only the zero c_path can be used. Signed-off-by: Ka-Cheong Poon <ka-cheong.poon@oracle.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-23rds: rds_msg_zcopy should return error of null rm->data.op_mmp_znotifierSowmini Varadhan
if either or both of MSG_ZEROCOPY and SOCK_ZEROCOPY have not been specified, the rm->data.op_mmp_znotifier allocation will be skipped. In this case, it is invalid ot pass down a cmsghdr with RDS_CMSG_ZCOPY_COOKIE, so return EINVAL from rds_msg_zcopy for this case. Reported-by: syzbot+f893ae7bb2f6456dfbc3@syzkaller.appspotmail.com Fixes: 0cebaccef3ac ("rds: zerocopy Tx support.") Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com> Acked-by: Willem de Bruijn <willemb@google.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-21rds: send: mark expected switch fall-through in rds_rm_sizeGustavo A. R. Silva
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Addresses-Coverity-ID: 1465362 ("Missing break in switch") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Acked-by: Sowmini Varadhan <sowmini.varadhan@oracle.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-16rds: zerocopy Tx support.Sowmini Varadhan
If the MSG_ZEROCOPY flag is specified with rds_sendmsg(), and, if the SO_ZEROCOPY socket option has been set on the PF_RDS socket, application pages sent down with rds_sendmsg() are pinned. The pinning uses the accounting infrastructure added by Commit a91dbff551a6 ("sock: ulimit on MSG_ZEROCOPY pages") The payload bytes in the message may not be modified for the duration that the message has been pinned. A multi-threaded application using this infrastructure may thus need to be notified about send-completion so that it can free/reuse the buffers passed to rds_sendmsg(). Notification of send-completion will identify each message-buffer by a cookie that the application must specify as ancillary data to rds_sendmsg(). The ancillary data in this case has cmsg_level == SOL_RDS and cmsg_type == RDS_CMSG_ZCOPY_COOKIE. Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Acked-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-16rds: hold a sock ref from rds_message to the rds_sockSowmini Varadhan
The existing model holds a reference from the rds_sock to the rds_message, but the rds_message does not itself hold a sock_put() on the rds_sock. Instead the m_rs field in the rds_message is assigned when the message is queued on the sock, and nulled when the message is dequeued from the sock. We want to be able to notify userspace when the rds_message is actually freed (from rds_message_purge(), after the refcounts to the rds_message go to 0). At the time that rds_message_purge() is called, the message is no longer on the rds_sock retransmit queue. Thus the explicit reference for the m_rs is needed to send a notification that will signal to userspace that it is now safe to free/reuse any pages that may have been pinned down for zerocopy. This patch manages the m_rs assignment in the rds_message with the necessary refcount book-keeping. Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-08rds: tcp: use rds_destroy_pending() to synchronize netns/module teardown and ↵Sowmini Varadhan
rds connection/workq management An rds_connection can get added during netns deletion between lines 528 and 529 of 506 static void rds_tcp_kill_sock(struct net *net) : /* code to pull out all the rds_connections that should be destroyed */ : 528 spin_unlock_irq(&rds_tcp_conn_lock); 529 list_for_each_entry_safe(tc, _tc, &tmp_list, t_tcp_node) 530 rds_conn_destroy(tc->t_cpath->cp_conn); Such an rds_connection would miss out the rds_conn_destroy() loop (that cancels all pending work) and (if it was scheduled after netns deletion) could trigger the use-after-free. A similar race-window exists for the module unload path in rds_tcp_exit -> rds_tcp_destroy_conns Concurrency with netns deletion (rds_tcp_kill_sock()) must be handled by checking check_net() before enqueuing new work or adding new connections. Concurrency with module-unload is handled by maintaining a module specific flag that is set at the start of the module exit function, and must be checked before enqueuing new work or adding new connections. This commit refactors existing RDS_DESTROY_PENDING checks added by commit 3db6e0d172c9 ("rds: use RCU to synchronize work-enqueue with connection teardown") and consolidates all the concurrency checks listed above into the function rds_destroy_pending(). Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-05rds: use RCU to synchronize work-enqueue with connection teardownSowmini Varadhan
rds_sendmsg() can enqueue work on cp_send_w from process context, but it should not enqueue this work if connection teardown has commenced (else we risk enquing work after rds_conn_path_destroy() has assumed that all work has been cancelled/flushed). Similarly some other functions like rds_cong_queue_updates and rds_tcp_data_ready are called in softirq context, and may end up enqueuing work on rds_wq after rds_conn_path_destroy() has assumed that all workqs are quiesced. Check the RDS_DESTROY_PENDING bit and use rcu synchronization to avoid all these races. Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-27RDS: Check cmsg_len before dereferencing CMSG_DATAAvinash Repaka
RDS currently doesn't check if the length of the control message is large enough to hold the required data, before dereferencing the control message data. This results in following crash: BUG: KASAN: stack-out-of-bounds in rds_rdma_bytes net/rds/send.c:1013 [inline] BUG: KASAN: stack-out-of-bounds in rds_sendmsg+0x1f02/0x1f90 net/rds/send.c:1066 Read of size 8 at addr ffff8801c928fb70 by task syzkaller455006/3157 CPU: 0 PID: 3157 Comm: syzkaller455006 Not tainted 4.15.0-rc3+ #161 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:17 [inline] dump_stack+0x194/0x257 lib/dump_stack.c:53 print_address_description+0x73/0x250 mm/kasan/report.c:252 kasan_report_error mm/kasan/report.c:351 [inline] kasan_report+0x25b/0x340 mm/kasan/report.c:409 __asan_report_load8_noabort+0x14/0x20 mm/kasan/report.c:430 rds_rdma_bytes net/rds/send.c:1013 [inline] rds_sendmsg+0x1f02/0x1f90 net/rds/send.c:1066 sock_sendmsg_nosec net/socket.c:628 [inline] sock_sendmsg+0xca/0x110 net/socket.c:638 ___sys_sendmsg+0x320/0x8b0 net/socket.c:2018 __sys_sendmmsg+0x1ee/0x620 net/socket.c:2108 SYSC_sendmmsg net/socket.c:2139 [inline] SyS_sendmmsg+0x35/0x60 net/socket.c:2134 entry_SYSCALL_64_fastpath+0x1f/0x96 RIP: 0033:0x43fe49 RSP: 002b:00007fffbe244ad8 EFLAGS: 00000217 ORIG_RAX: 0000000000000133 RAX: ffffffffffffffda RBX: 00000000004002c8 RCX: 000000000043fe49 RDX: 0000000000000001 RSI: 000000002020c000 RDI: 0000000000000003 RBP: 00000000006ca018 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000217 R12: 00000000004017b0 R13: 0000000000401840 R14: 0000000000000000 R15: 0000000000000000 To fix this, we verify that the cmsg_len is large enough to hold the data to be read, before proceeding further. Reported-by: syzbot <syzkaller-bugs@googlegroups.com> Signed-off-by: Avinash Repaka <avinash.repaka@oracle.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-07rds: Fix incorrect statistics countingHåkon Bugge
In rds_send_xmit() there is logic to batch the sends. However, if another thread has acquired the lock and has incremented the send_gen, it is considered a race and we yield. The code incrementing the s_send_lock_queue_raced statistics counter did not count this event correctly. This commit counts the race condition correctly. Changes from v1: - Removed check for *someone_on_xmit()* - Fixed incorrect indentation Signed-off-by: Håkon Bugge <haakon.bugge@oracle.com> Reviewed-by: Knut Omang <knut.omang@oracle.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-05rds: Fix non-atomic operation on shared flag variableHåkon Bugge
The bits in m_flags in struct rds_message are used for a plurality of reasons, and from different contexts. To avoid any missing updates to m_flags, use the atomic set_bit() instead of the non-atomic equivalent. Signed-off-by: Håkon Bugge <haakon.bugge@oracle.com> Reviewed-by: Knut Omang <knut.omang@oracle.com> Reviewed-by: Wei Lin Guay <wei.lin.guay@oracle.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-20rds: Make sure updates to cp_send_gen can be observedHåkon Bugge
cp->cp_send_gen is treated as a normal variable, although it may be used by different threads. This is fixed by using {READ,WRITE}_ONCE when it is incremented and READ_ONCE when it is read outside the {acquire,release}_in_xmit protection. Normative reference from the Linux-Kernel Memory Model: Loads from and stores to shared (but non-atomic) variables should be protected with the READ_ONCE(), WRITE_ONCE(), and ACCESS_ONCE(). Clause 5.1.2.4/25 in the C standard is also relevant. Signed-off-by: Håkon Bugge <haakon.bugge@oracle.com> Reviewed-by: Knut Omang <knut.omang@oracle.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-22rds: tcp: send handshake ping-probe from passive endpointSowmini Varadhan
The RDS handshake ping probe added by commit 5916e2c1554f ("RDS: TCP: Enable multipath RDS for TCP") is sent from rds_sendmsg() before the first data packet is sent to a peer. If the conversation is not bidirectional (i.e., one side is always passive and never invokes rds_sendmsg()) and the passive side restarts its rds_tcp module, a new HS ping probe needs to be sent, so that the number of paths can be re-established. This patch achieves that by sending a HS ping probe from rds_tcp_accept_one() when c_npaths is 0 (i.e., we have not done a handshake probe with this peer yet). Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com> Tested-by: Jenny Xu <jenny.x.xu@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-16rds: tcp: various endian-ness fixesSowmini Varadhan
Found when testing between sparc and x86 machines on different subnets, so the address comparison patterns hit the corner cases and brought out some bugs fixed by this patch. Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com> Tested-by: Imanti Mendez <imanti.mendez@oracle.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-02RDS: make message size limit compliant with specAvinash Repaka
RDS support max message size as 1M but the code doesn't check this in all cases. Patch fixes it for RDMA & non-RDMA and RDS MR size and its enforced irrespective of underlying transport. Signed-off-by: Avinash Repaka <avinash.repaka@oracle.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
2017-01-02RDS: RDMA: Fix the composite message user notificationSantosh Shilimkar
When application sends an RDS RDMA composite message consist of RDMA transfer to be followed up by non RDMA payload, it expect to be notified *only* when the full message gets delivered. RDS RDMA notification doesn't behave this way though. Thanks to Venkat for debug and root casuing the issue where only first part of the message(RDMA) was successfully delivered but remainder payload delivery failed. In that case, application should not be notified with a false positive of message delivery success. Fix this case by making sure the user gets notified only after the full message delivery. Reviewed-by: Venkat Venkatsubra <venkat.x.venkatsubra@oracle.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
2017-01-02RDS: RDMA: return appropriate error on rdma map failuresSantosh Shilimkar
The first message to a remote node should prompt a new connection even if it is RDMA operation. For RDMA operation the MR mapping can fail because connections is not yet up. Since the connection establishment is asynchronous, we make sure the map failure because of unavailable connection reach to the user by appropriate error code. Before returning to the user, lets trigger the connection so that its ready for the next retry. Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
2017-01-02RDS: mark few internal functions static to make sparse build happySantosh Shilimkar
Fixes below warnings: warning: symbol 'rds_send_probe' was not declared. Should it be static? warning: symbol 'rds_send_ping' was not declared. Should it be static? warning: symbol 'rds_tcp_accept_one_path' was not declared. Should it be static? warning: symbol 'rds_walk_conn_path_info' was not declared. Should it be static? Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
2016-11-17RDS: TCP: Track peer's connection generation numberSowmini Varadhan
The RDS transport has to be able to distinguish between two types of failure events: (a) when the transport fails (e.g., TCP connection reset) but the RDS socket/connection layer on both sides stays the same (b) when the peer's RDS layer itself resets (e.g., due to module reload or machine reboot at the peer) In case (a) both sides must reconnect and continue the RDS messaging without any message loss or disruption to the message sequence numbers, and this is achieved by rds_send_path_reset(). In case (b) we should reset all rds_connection state to the new incarnation of the peer. Examples of state that needs to be reset are next expected rx sequence number from, or messages to be retransmitted to, the new incarnation of the peer. To achieve this, the RDS handshake probe added as part of commit 5916e2c1554f ("RDS: TCP: Enable multipath RDS for TCP") is enhanced so that sender and receiver of the RDS ping-probe will add a generation number as part of the RDS_EXTHDR_GEN_NUM extension header. Each peer stores local and remote generation numbers as part of each rds_connection. Changes in generation number will be detected via incoming handshake probe ping request or response and will allow the receiver to reset rds_connection state. Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-15RDS: TCP: Enable multipath RDS for TCPSowmini Varadhan
Use RDS probe-ping to compute how many paths may be used with the peer, and to synchronously start the multiple paths. If mprds is supported, hash outgoing traffic to one of multiple paths in rds_sendmsg() when multipath RDS is supported by the transport. CC: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-01RDS: Rework path specific indirectionsSowmini Varadhan
Refactor code to avoid separate indirections for single-path and multipath transports. All transports (both single and mp-capable) will get a pointer to the rds_conn_path, and can trivially derive the rds_connection from the ->cp_conn. Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-14RDS: Update rds_conn_shutdown to work with rds_conn_pathSowmini Varadhan
This commit changes rds_conn_shutdown to take a rds_conn_path * argument, allowing it to shutdown paths other than c_path[0] for MP-capable transports. Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-14RDS: Add rds_conn_path_connect_if_down() for MP-aware callersSowmini Varadhan
rds_conn_path_connect_if_down() works on the rds_conn_path that it is passed. Callers who are not t_m_capable may continue calling rds_conn_connect_if_down, which will invoke rds_conn_path_connect_if_down() with the default c_path[0]. Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-14RDS: Make rds_send_pong() take a rds_conn_path argumentSowmini Varadhan
This commit allows rds_send_pong() callers to send back the rds pong message on some path other than c_path[0] by passing in a struct rds_conn_path * argument. It also removes the last dependency on the #defines in rds_single.h from send.c Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-14RDS: Extract rds_conn_path from i_conn_path in rds_send_drop_to() for ↵Sowmini Varadhan
MP-capable transports Explicitly set up rds_conn_path, either from i_conn_path (for MP capable transpots) or as c_path[0], and use this in rds_send_drop_to() Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-14RDS: Pass rds_conn_path to rds_send_xmit()Sowmini Varadhan
Pass a struct rds_conn_path to rds_send_xmit so that MP capable transports can transmit packets on something other than c_path[0]. The eventual goal for MP capable transports is to hash the rds socket to a path based on the bound local address/port, and use this path as the argument to rds_send_xmit() Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-14RDS: Make rds_send_queue_rm() rds_conn_path awareSowmini Varadhan
Pass the rds_conn_path to rds_send_queue_rm, and use it to initialize the i_conn_path field in struct rds_incoming. This commit also makes rds_send_queue_rm() MP capable, because it now takes locks specific to the rds_conn_path passed in, instead of defaulting to the c_path[0] based defines from rds_single_path.h Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-14RDS: Remove stale function rds_send_get_message()Sowmini Varadhan
The only caller of rds_send_get_message() was rds_iw_send_cq_comp_handler() which was removed as part of commit dcdede0406d3 ("RDS: Drop stale iWARP RDMA transport"), so remove rds_send_get_message() for the same reason. Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-14RDS: Add rds_send_path_drop_acked()Sowmini Varadhan
rds_send_path_drop_acked() is the path-specific version of rds_send_drop_acked() to be invoked by MP capable callers. Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-14RDS: Add rds_send_path_reset()Sowmini Varadhan
rds_send_path_reset() is the path specific version of rds_send_reset() intended for MP capable callers. Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-14RDS: split out connection specific state from rds_connection to rds_conn_pathSowmini Varadhan
In preparation for multipath RDS, split the rds_connection structure into a base structure, and a per-path struct rds_conn_path. The base structure tracks information and locks common to all paths. The workqs for send/recv/shutdown etc are tracked per rds_conn_path. Thus the workq callbacks now work with rds_conn_path. This commit allows for one rds_conn_path per rds_connection, and will be extended into multiple conn_paths in subsequent commits. Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-07RDS: TCP: Retransmit half-sent datagrams when switching sockets in ↵Sowmini Varadhan
rds_tcp_reset_callbacks When we switch a connection's sockets in rds_tcp_rest_callbacks, any partially sent datagram must be retransmitted on the new socket so that the receiver can correctly reassmble the RDS datagram. Use rds_send_reset() which is designed for this purpose. Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-24RDS: fix race condition when sending a message on unbound socketQuentin Casasnovas
Sasha's found a NULL pointer dereference in the RDS connection code when sending a message to an apparently unbound socket. The problem is caused by the code checking if the socket is bound in rds_sendmsg(), which checks the rs_bound_addr field without taking a lock on the socket. This opens a race where rs_bound_addr is temporarily set but where the transport is not in rds_bind(), leading to a NULL pointer dereference when trying to dereference 'trans' in __rds_conn_create(). Vegard wrote a reproducer for this issue, so kindly ask him to share if you're interested. I cannot reproduce the NULL pointer dereference using Vegard's reproducer with this patch, whereas I could without. Complete earlier incomplete fix to CVE-2015-6937: 74e98eb08588 ("RDS: verify the underlying transport exists before creating a connection") Cc: David S. Miller <davem@davemloft.net> Cc: stable@vger.kernel.org Reviewed-by: Vegard Nossum <vegard.nossum@oracle.com> Reviewed-by: Sasha Levin <sasha.levin@oracle.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: Quentin Casasnovas <quentin.casasnovas@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-18RDS: fix rds-ping deadlock over TCP transportsantosh.shilimkar@oracle.com
Sowmini found hang with rds-ping while testing RDS over TCP. Its a corner case and doesn't happen always. The issue is not reproducible with IB transport. Its clear from below dump why we see it with RDS TCP. [<ffffffff8153b7e5>] do_tcp_setsockopt+0xb5/0x740 [<ffffffff8153bec4>] tcp_setsockopt+0x24/0x30 [<ffffffff814d57d4>] sock_common_setsockopt+0x14/0x20 [<ffffffffa096071d>] rds_tcp_xmit_prepare+0x5d/0x70 [rds_tcp] [<ffffffffa093b5f7>] rds_send_xmit+0xd7/0x740 [rds] [<ffffffffa093bda2>] rds_send_pong+0x142/0x180 [rds] [<ffffffffa0939d34>] rds_recv_incoming+0x274/0x330 [rds] [<ffffffff810815ae>] ? ttwu_queue+0x11e/0x130 [<ffffffff814dcacd>] ? skb_copy_bits+0x6d/0x2c0 [<ffffffffa0960350>] rds_tcp_data_recv+0x2f0/0x3d0 [rds_tcp] [<ffffffff8153d836>] tcp_read_sock+0x96/0x1c0 [<ffffffffa0960060>] ? rds_tcp_recv_init+0x40/0x40 [rds_tcp] [<ffffffff814d6a90>] ? sock_def_write_space+0xa0/0xa0 [<ffffffffa09604d1>] rds_tcp_data_ready+0xa1/0xf0 [rds_tcp] [<ffffffff81545249>] tcp_data_queue+0x379/0x5b0 [<ffffffffa0960cdb>] ? rds_tcp_write_space+0xbb/0x110 [rds_tcp] [<ffffffff81547fd2>] tcp_rcv_established+0x2e2/0x6e0 [<ffffffff81552602>] tcp_v4_do_rcv+0x122/0x220 [<ffffffff81553627>] tcp_v4_rcv+0x867/0x880 [<ffffffff8152e0b3>] ip_local_deliver_finish+0xa3/0x220 This happens because rds_send_xmit() chain wants to take sock_lock which is already taken by tcp_v4_rcv() on its way to rds_tcp_data_ready(). Commit db6526dcb51b ("RDS: use rds_send_xmit() state instead of RDS_LL_SEND_FULL") which was trying to opportunistically finish the send request in same thread context. But because of above recursive lock hang with RDS TCP, the send work from rds_send_pong() needs to deferred to worker to avoid lock up. Given RDS ping is more of connectivity test than performance critical path, its should be ok even for transport like IB. Reported-by: Sowmini Varadhan <sowmini.varadhan@oracle.com> Acked-by: Sowmini Varadhan <sowmini.varadhan@oracle.com> Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Acked-by: Sowmini Varadhan <sowmini.varadhan@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-05RDS: IB: split send completion handling and do batch ackSantosh Shilimkar
Similar to what we did with receive CQ completion handling, we split the transmit completion handler so that it lets us implement batched work completion handling. We re-use the cq_poll routine and makes use of RDS_IB_SEND_OP to identify the send vs receive completion event handler invocation. Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>