summaryrefslogtreecommitdiff
path: root/net/nfc
AgeCommit message (Collapse)Author
2015-10-28NFC: nci: non-static functions can not be inlineRobert Dolca
This fixes a build error that seems to be toochain dependent (Not seen with gcc v5.1): In file included from net/nfc/nci/rsp.c:36:0: net/nfc/nci/rsp.c: In function ‘nci_rsp_packet’: include/net/nfc/nci_core.h:355:12: error: inlining failed in call to always_inline ‘nci_prop_rsp_packet’: function body not available inline int nci_prop_rsp_packet(struct nci_dev *ndev, __u16 opcode, Signed-off-by: Robert Dolca <robert.dolca@intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-10-27NFC: NCI: allow spi driver to choose transfer clockVincent Cuissard
In some cases low level drivers might want to update the SPI transfer clock (e.g. during firmware download). This patch adds this support. Without any modification the driver will use the default SPI clock (from pdata or device tree). Signed-off-by: Vincent Cuissard <cuissard@marvell.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-10-27NFC: NCI: move generic spi driver to a moduleVincent Cuissard
SPI driver should be a module. Signed-off-by: Vincent Cuissard <cuissard@marvell.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-10-27NFC: NCI: export nci_send_frame and nci_send_cmd functionVincent Cuissard
Export nci_send_frame and nci_send_cmd symbols to allow drivers to use it. This is needed for example if NCI is used during firmware download phase. Signed-off-by: Vincent Cuissard <cuissard@marvell.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-10-27NFC: st21nfca: Add support for proprietary commandsChristophe Ricard
Add support for proprietary commands useful mainly for factory testings. Here is a list: - FACTORY_MODE: Allow to set the driver into a mode where no secure element are activated. It does not consider any NFC_ATTR_VENDOR_DATA. - HCI_CLEAR_ALL_PIPES: Allow to execute a HCI clear all pipes command. It does not consider any NFC_ATTR_VENDOR_DATA. - HCI_DM_PUT_DATA: Allow to configure specific CLF registry as for example RF trimmings or low level drivers configurations (I2C, SPI, SWP). - HCI_DM_UPDATE_AID: Allow to configure an AID routing into the CLF routing table following RF technology, CLF mode or protocol. - HCI_DM_GET_INFO: Allow to retrieve CLF information. - HCI_DM_GET_DATA: Allow to retrieve CLF configurable data such as low level drivers configurations or RF trimmings. - HCI_DM_LOAD: Allow to load a firmware into the CLF. A complete packet can be more than 8KB. - HCI_DM_RESET: Allow to run a CLF reset in order to "commit" CLF configuration changes without CLF power off. - HCI_GET_PARAM: Allow to retrieve an HCI CLF parameter (for example the white list). - HCI_DM_FIELD_GENERATOR: Allow to generate different kind of RF technology. When using this command to anti-collision is done. - HCI_LOOPBACK: Allow to echo a command and test the Dh to CLF connectivity. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-10-27NFC: st-nci: Add few code style fixesChristophe Ricard
Add some few code style fixes. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-10-27NFC: netlink: Add mode parameter to deactivate_target functionsChristophe Ricard
In order to manage in a better way the nci poll mode state machine, add mode parameter to deactivate_target functions. This way we can manage different target state. mode parameter make sense only in nci core. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-10-26NFC: nci: Create pipe on specific gate in nci_hci_connect_gateChristophe Ricard
Some gates might need to have their pipes explicitly created. Add a call to nci_hci_create_pipe in nci_hci_connect_gate for every gate that is different than NCI_HCI_LINK_MGMT_GATE or NCI_HCI_ADMIN_GATE. In case of an error when opening a pipe, like in hci layer, delete the pipe if it was created. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-10-26NFC: nci: Call nci_hci_clear_all_pipes at HCI initial activation.Christophe Ricard
When session_id is filled to 0xff, the pipe configuration is probably incorrect and needs to be cleared. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-10-26NFC: nci: add nci_hci_clear_all_pipes functionsChristophe Ricard
nci_hci_clear_all_pipes might be use full in some cases for example after a firmware update. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-10-26NFC: nci: extract pipe value using NCI_HCP_MSG_GET_PIPEChristophe Ricard
When receiving data in nci_hci_msg_rx_work, extract pipe value using NCI_HCP_MSG_GET_PIPE macro. Cc: stable@vger.kernel.org Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-10-26NFC: nci: Fix improper management of HCI return codeChristophe Ricard
When sending HCI data over NCI, HCI return code is part of the NCI data. In order to get correctly the HCI return code, we assume the NCI communication is successful and extract the return code for the nci_hci functions return code. This is done because nci_to_errno does not match hci return code value. Cc: stable@vger.kernel.org Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-10-26NFC: nci: Fix incorrect data chaining when sending dataChristophe Ricard
When sending HCI data over NCI, cmd information should be present only on the first packet. Each packet shall be specifically allocated and sent to the NCI layer. Cc: stable@vger.kernel.org Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-10-25NFC: nci: add nci_get_conn_info_by_id functionRobert Dolca
This functin takes as a parameter a pointer to the nci_dev struct and the first byte from the values of the first domain specific parameter that was used for the connection creation. Signed-off-by: Robert Dolca <robert.dolca@intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-10-25NFC: nci: fix possible crash in nci_core_conn_createRobert Dolca
If the number of destination speific parameters supplied is 0 the call will fail. If the first destination specific parameter does not have a value, curr_id will be set to 0. Signed-off-by: Robert Dolca <robert.dolca@intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-10-25NFC: nci: rename nci_prop_ops to nci_driver_opsRobert Dolca
Initially it was used to create hooks in the driver for proprietary operations. Currently it is being used for hooks for both proprietary and generic operations. Signed-off-by: Robert Dolca <robert.dolca@intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-10-25NFC: nci: Allow the driver to set handler for core nci opsRobert Dolca
The driver may be required to act when some responses or notifications arrive. For example the NCI core does not have a handler for NCI_OP_CORE_GET_CONFIG_RSP. The NFCC can send a config response that has to be read by the driver and the packet may contain vendor specific data. The Fields Peak driver needs to take certain actions when a reset notification arrives (packet also not handled by the nfc core). The driver handlers do not interfere with the core and they are called after the core processes the packet. Signed-off-by: Robert Dolca <robert.dolca@intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-10-25NFC: nci: Introduce nci_core_cmdRobert Dolca
This allows sending core commands from the driver. The driver should be able to send NCI core commands like CORE_GET_CONFIG_CMD. Signed-off-by: Robert Dolca <robert.dolca@intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-10-25NFC: nci: Do not call post_setup when setup failsRobert Dolca
The driver should know that it can continue with post setup where setup left off. Being able to execute post_setup when setup fails may force the developer to keep this state in the driver. Signed-off-by: Robert Dolca <robert.dolca@intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-10-25NFC: nci: Add function to get max packet size for connRobert Dolca
FDP driver needs to send the firmware as regular packets (not fragmented). The driver should have a way to get the max packet size for a given connection. Signed-off-by: Robert Dolca <robert.dolca@intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-10-25NFC: nci: Export nci data send APIRobert Dolca
For the firmware update the driver may use nci_send_data. Signed-off-by: Robert Dolca <robert.dolca@intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-10-19NFC: delete null dereferenceJulia Lawall
The exit label performs device_unlock(&dev->dev);, which will fail when dev is NULL, and nfc_put_device(dev);, which is not useful when dev is NULL, so just exit the function immediately. Problem found using scripts/coccinelle/null/deref_null.cocci Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-10-03NFC: nci: Use __nci_request for exported routinesSamuel Ortiz
Since we do not know in which context drivers will call these routines, they should use the unlocked version of nci_request, i.e. __nci_request. It is up to drivers to know/decide if they need to take the req_lock mutex before calling those routines. When being called from the NCI setup routine there is no need to do so as ops->setup is called under req_lock. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-08-20nfc: netlink: Add capability to reply to vendor_cmd with dataChristophe Ricard
A proprietary vendor command may send back useful data to the user application. For example, the field level applied on the NFC router antenna. Still based on net/wireless/nl80211.c implementation, add nfc_vendor_cmd_alloc_reply_skb and nfc_vendor_cmd_reply in order to send back over netlink data generated by a proprietary command. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-08-20nfc: nci: hci: Add check on skb nci_hci_send_cmd parameterChristophe Ricard
skb can be NULL and may lead to a NULL pointer error. Add a check condition before setting HCI rx buffer. Cc: stable@vger.kernel.org Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-08-20NFC: nci: export nci_core_reset and nci_core_initRobert Baldyga
Some drivers needs to have ability to reinit NCI core, for example after updating firmware in setup() of post_setup() callback. This patch makes nci_core_reset() and nci_core_init() functions public, to make it possible. Signed-off-by: Robert Baldyga <r.baldyga@samsung.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-08-20NFC: nci: Add post_setup handlerRobert Baldyga
Some drivers require non-standard configuration after NCI_CORE_INIT request, because they need to know ndev->manufact_specific_info or ndev->manufact_id. This patch adds post_setup handler allowing to do such custom configuration. Signed-off-by: Robert Baldyga <r.baldyga@samsung.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-08-17nfc: netlink: Warning fixChristophe Ricard
When NFC_ATTR_VENDOR_DATA is not set, data_len is 0 and data is NULL. Fixes the following warning: net/nfc/netlink.c:1536:3: warning: 'data' may be used uninitialized +in this function [-Wmaybe-uninitialized] return cmd->doit(dev, data, data_len); Cc: stable@vger.kernel.org Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-08-17nfc: netlink: Add check on NFC_ATTR_VENDOR_DATAChristophe Ricard
NFC_ATTR_VENDOR_DATA is an optional vendor_cmd argument. The current code was potentially using a non existing argument leading to potential catastrophic results. Cc: stable@vger.kernel.org Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-06-15NFC: nci: fix mistake in uart generic driverVincent Cuissard
It was not possible to register a UART driver due to a bad condition. Signed-off-by: Vincent Cuissard <cuissard@marvell.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-06-13NFC: nci: remove current SLEEP mode managementVincent Cuissard
NCI deactivate management was modified to support all NCI deactivation type. Problem is that all the API are not ready yet for it. Problem is that with current code, when neard asks to deactivate the tag it sends a deactivate SLEEP but nobody will then send a IDLE deactivate. This IDLE deactivate is mandatory since NFC controller can only be unlocked by DH. Signed-off-by: Vincent Cuissard <cuissard@marvell.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-06-11NFC: nfcmrvl: add UART driverVincent Cuissard
Add support of Marvell NFC chip controlled over UART Signed-off-by: Vincent Cuissard <cuissard@marvell.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-06-11NFC: nci: add generic uart supportVincent Cuissard
Some NFC controller supports UART as host interface. As with SPI, a lot of code can be shared between vendor drivers. This patch add the generic support of UART and provides some extension API for vendor specific needs. This code is strongly inspired by the Bluetooth HCI ldisc implementation. NCI UART vendor drivers will have to register themselves to this layer via nci_uart_register. Underlying tty will have to be configured from user land thanks to an ioctl. Signed-off-by: Vincent Cuissard <cuissard@marvell.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-06-10NFC: nci: Export nci_req_completeSamuel Ortiz
Drivers implementing proprietary ops may need it now. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-06-09NFC: netlink: Implement vendor command supportSamuel Ortiz
Vendor commands are passed from userspace through the NFC_CMD_VENDOR netlink command, allowing driver and hardware specific operations implementations like for example RF tuning or production line calibration. Drivers will associate a set of vendor commands to a vendor id, which could typically be an OUI. The netlink kernel implementation will try to match the received vendor id and sub command attributes with the registered ones. When such match is found, the driver defined sub command routine is called. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-06-09NFC: nci: Move close ops call in nci_close_deviceChristophe Ricard
When closing the device some data (proprietary commands) might be sent. The core state machine needs to be set for correct command execution. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-06-09NFC: nci: Add nci_prop_cmd allowing to send proprietary nci cmdChristophe Ricard
Handle allowing to send proprietary nci commands anywhere in the nci state machine. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-06-09NFC: nci: Add nci init ops for early device initializationChristophe Ricard
Some device may need to execute some proprietary commands in order to "wake-up"; Before the nci state initialization. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-06-09NFC: nci: Add NCI_RESET return code check before setupChristophe Ricard
setup was executed in any case, even if NCI_RESET failed. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-06-09NFC: nci: Handle proprietary response and notificationsSamuel Ortiz
Allow for drivers to explicitly define handlers for each proprietary notifications and responses they expect to support. Reviewed-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-06-09NFC: nci: hci: Fix releasing uninitialized skbsJoe Perches
Several of these goto exit; uses should be direct returns as skb is not yet initialized by nci_hci_get_param(). Miscellanea: o Use !memcmp instead of memcmp() == 0 o Remove unnecessary goto from if () {... goto exit;} else {...} exit: Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-05-11net: Pass kern from net_proto_family.create to sk_allocEric W. Biederman
In preparation for changing how struct net is refcounted on kernel sockets pass the knowledge that we are creating a kernel socket from sock_create_kern through to sk_alloc. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-13nfc: Fix portid type in urelease_workRichard Weinberger
portid is an unsigned integer. Fix urelease_work to match all other portid user in the kernel. Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-26NFC: nci: Add firmware download supportClément Perrochaud
A simple forward for firmware download (i.e. sending a new firmware to the NFC adapter) from the NFC subsystem to the drivers. This feature is required to update the firmware of NXP-NCI NFC controllers but can be used by any NCI driver. This feature has been present in the HCI subsystem since 9a695d. Signed-off-by: Clément Perrochaud <clement.perrochaud@effinnov.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-03-02net: Remove iocb argument from sendmsg and recvmsgYing Xue
After TIPC doesn't depend on iocb argument in its internal implementations of sendmsg() and recvmsg() hooks defined in proto structure, no any user is using iocb argument in them at all now. Then we can drop the redundant iocb argument completely from kinds of implementations of both sendmsg() and recvmsg() in the entire networking stack. Cc: Christoph Hellwig <hch@lst.de> Suggested-by: Al Viro <viro@ZenIV.linux.org.uk> Signed-off-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-04NFC: nci: Move NFCEE discovery logicChristophe Ricard
NFCEE_DISCOVER_CMD is a specified NCI command used to discover NFCEE IDs. Move nci_nfcee_discover() call to nci_discover_se() in order to guarantee: - NFCEE_DISCOVER_CMD run when the NCI state machine is initialized - NFCEE_DISCOVER_CMD is not run in case there is not discover_se hook defined by a NFC device driver. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-02-04NFC: nci: Move logical connection structure allocationChristophe Ricard
conn_info is currently allocated only after nfcee_discovery_ntf which is not generic enough for logical connection other than NFCEE. The corresponding conn_info is now created in nci_core_conn_create_rsp(). Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-02-04NFC: nci: Change credits field to credits_cntChristophe Ricard
For consistency sake change nci_core_conn_create_rsp structure credits field to credits_cnt. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-02-04NFC: nci: Support all destinations type when creating a connectionChristophe Ricard
The current implementation limits nci_core_conn_create_req() to only manage NCI_DESTINATION_NFCEE. Add new parameters to nci_core_conn_create() to support all destination types described in the NCI specification. Because there are some parameters with variable size dynamic buffer allocation is needed. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-02-04NFC: nci: Add reference to the RF logical connectionChristophe Ricard
The NCI_STATIC_RF_CONN_ID logical connection is the most used connection. Keeping it directly accessible in the nci_dev structure will simplify and optimize the access. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>