summaryrefslogtreecommitdiff
path: root/net/nfc/hci/core.c
AgeCommit message (Collapse)Author
2017-06-16networking: add and use skb_put_u8()Johannes Berg
Joe and Bjørn suggested that it'd be nicer to not have the cast in the fairly common case of doing *(u8 *)skb_put(skb, 1) = c; Add skb_put_u8() for this case, and use it across the code, using the following spatch: @@ expression SKB, C, S; typedef u8; identifier fn = {skb_put}; fresh identifier fn2 = fn ## "_u8"; @@ - *(u8 *)fn(SKB, S) = C; + fn2(SKB, C); Note that due to the "S", the spatch isn't perfect, it should have checked that S is 1, but there's also places that use a sizeof expression like sizeof(var) or sizeof(u8) etc. Turns out that nobody ever did something like *(u8 *)skb_put(skb, 2) = c; which would be wrong anyway since the second byte wouldn't be initialized. Suggested-by: Joe Perches <joe@perches.com> Suggested-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-16networking: make skb_push & __skb_push return void pointersJohannes Berg
It seems like a historic accident that these return unsigned char *, and in many places that means casts are required, more often than not. Make these functions return void * and remove all the casts across the tree, adding a (u8 *) cast only where the unsigned char pointer was used directly, all done with the following spatch: @@ expression SKB, LEN; typedef u8; identifier fn = { skb_push, __skb_push, skb_push_rcsum }; @@ - *(fn(SKB, LEN)) + *(u8 *)fn(SKB, LEN) @@ expression E, SKB, LEN; identifier fn = { skb_push, __skb_push, skb_push_rcsum }; type T; @@ - E = ((T *)(fn(SKB, LEN))) + E = fn(SKB, LEN) @@ expression SKB, LEN; identifier fn = { skb_push, __skb_push, skb_push_rcsum }; @@ - fn(SKB, LEN)[0] + *(u8 *)fn(SKB, LEN) Note that the last part there converts from push(...)[0] to the more idiomatic *(u8 *)push(...). Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-16networking: make skb_put & friends return void pointersJohannes Berg
It seems like a historic accident that these return unsigned char *, and in many places that means casts are required, more often than not. Make these functions (skb_put, __skb_put and pskb_put) return void * and remove all the casts across the tree, adding a (u8 *) cast only where the unsigned char pointer was used directly, all done with the following spatch: @@ expression SKB, LEN; typedef u8; identifier fn = { skb_put, __skb_put }; @@ - *(fn(SKB, LEN)) + *(u8 *)fn(SKB, LEN) @@ expression E, SKB, LEN; identifier fn = { skb_put, __skb_put }; type T; @@ - E = ((T *)(fn(SKB, LEN))) + E = fn(SKB, LEN) which actually doesn't cover pskb_put since there are only three users overall. A handful of stragglers were converted manually, notably a macro in drivers/isdn/i4l/isdn_bsdcomp.c and, oddly enough, one of the many instances in net/bluetooth/hci_sock.c. In the former file, I also had to fix one whitespace problem spatch introduced. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-16networking: introduce and use skb_put_data()Johannes Berg
A common pattern with skb_put() is to just want to memcpy() some data into the new space, introduce skb_put_data() for this. An spatch similar to the one for skb_put_zero() converts many of the places using it: @@ identifier p, p2; expression len, skb, data; type t, t2; @@ ( -p = skb_put(skb, len); +p = skb_put_data(skb, data, len); | -p = (t)skb_put(skb, len); +p = skb_put_data(skb, data, len); ) ( p2 = (t2)p; -memcpy(p2, data, len); | -memcpy(p, data, len); ) @@ type t, t2; identifier p, p2; expression skb, data; @@ t *p; ... ( -p = skb_put(skb, sizeof(t)); +p = skb_put_data(skb, data, sizeof(t)); | -p = (t *)skb_put(skb, sizeof(t)); +p = skb_put_data(skb, data, sizeof(t)); ) ( p2 = (t2)p; -memcpy(p2, data, sizeof(*p)); | -memcpy(p, data, sizeof(*p)); ) @@ expression skb, len, data; @@ -memcpy(skb_put(skb, len), data, len); +skb_put_data(skb, data, len); (again, manually post-processed to retain some comments) Reviewed-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-27NFC: netlink: Add mode parameter to deactivate_target functionsChristophe Ricard
In order to manage in a better way the nci poll mode state machine, add mode parameter to deactivate_target functions. This way we can manage different target state. mode parameter make sense only in nci core. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-01-28NFC: hci: Add cmd_received handlerChristophe Ricard
When a command is received, it is sometime needed to let the CLF driver do some additional operations. (ex: count remaining pipe notification...) Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-01-28NFC: hci: Reference every pipe information according to notificationChristophe Ricard
We update the tracked pipes status when receiving HCI commands. Also we forward HCI errors and we reply to any HCI command, even though we don't support it. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-01-27NFC: hci: Change nfc_hci_send_response gate parameter to pipeChristophe Ricard
As there can be several pipes connected to the same gate, we need to know which pipe ID to use when sending an HCI response. A gate ID is not enough. Instead of changing the nfc_hci_send_response() API to something not aligned with the rest of the HCI API, we call nfc_hci_hcp_message_tx directly. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-01-27NFC: hci: Add pipes table to reference them with a tuple {gate, host}Christophe Ricard
In order to keep host source information on specific hci event (such as evt_connectivity or evt_transaction) and because 2 pipes can be connected to the same gate, it is necessary to add a table referencing every pipe with a {gate, host} tuple. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-01-27NFC: hci: Change event_received handler gate parameter to pipeChristophe Ricard
Several pipes may point to the same CLF gate, so getting the gate ID as an input is not enough. For example dual secure element may have 2 pipes (1 for uicc and 1 for eSE) pointing to the connectivity gate. As resolving gate and host IDs can be done from a pipe, we now pass the pipe ID to the event received handler. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-12-02NFC: hci: Add support for NOTIFY_ALL_PIPE_CLEAREDChristophe Ricard
When switching from UICC to another, the CLF may signals to the Terminal Host that some existing pipe are cleared for future update. This notification needs to be "acked" by the Terminal Host with a ANY_OK message. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-12-02NFC: hci: Add open pipe command handlerChristophe Ricard
If our terminal connect with other host like UICC, it may create a pipe with us, the host controller will notify us new pipe created, after that UICC will open that pipe, if we don't handle that request, UICC may failed to continue initialize which may lead to card emulation feature failed to work Signed-off-by: Arron Wang <arron.wang@intel.com> Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-12-02NFC: hci: Add se_io HCI operandChristophe Ricard
se_io allows to send apdu over the CLF to the embedded Secure Element. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-07-23NFC: hci: Add stop_poll HCI operand.Christophe Ricard
stop_poll allows to stop CLF reader polling. Some other operations might be necessary for some CLF to stop polling. For example in card mode. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-04-22NFC: hci: Fix sparse: cast to restricted __be16Christophe Ricard
Fixing "sparse: cast to restricted __be16" message when building with make C=1 CF=-D__CHECK_ENDIAN__ Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-04-22NFC: hci: Add load_session HCI operandChristophe Ricard
load_session allows a CLF to restore the gate <-> pipe table from some proprietary location. The main advantage to add this function is to reduce the memory wear by running pipe creation (and storing) only once. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-01-04NFC: Return driver failure upon unknown event receptionSamuel Ortiz
If the device is polling, this will trigger a netlink event to notify userspace about the polling error. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-12-11nfc: Fix FSF address in file headersJeff Kirsher
Several files refer to an old address for the Free Software Foundation in the file header comment. Resolve by replacing the address with the URL <http://www.gnu.org/licenses/> so that we do not have to keep updating the header comments anytime the address changes. CC: linux-wireless@vger.kernel.org CC: Lauro Ramos Venancio <lauro.venancio@openbossa.org> CC: Aloisio Almeida Jr <aloisio.almeida@openbossa.org> CC: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-08-14NFC: hci: Fix enable/disable confusionDan Carpenter
There is a cut and paste bug so we enable a second time instead of disabling. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-07-31NFC: netlink: Rename CMD_FW_UPLOAD to CMD_FW_DOWNLOADSamuel Ortiz
Loading a firmware into a target is typically called firmware download, not firmware upload. So we rename the netlink API to NFC_CMD_FW_DOWNLOAD in order to avoid any terminology confusion from userspace. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-06-14NFC: Extend and fix the internal secure element APISamuel Ortiz
Secure elements need to be discovered after enabling the NFC controller. This is typically done by the NCI core and the HCI drivers (HCI does not specify how to discover SEs, it is left to the specific drivers). Also, the SE enable/disable API explicitely takes a SE index as its argument. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-06-14NFC: Remove the static supported_se fieldSamuel Ortiz
Supported secure elements are typically found during a discovery process initiated when the NFC controller is up and running. For a given NFC chipset there can be many configurations (embedded SE or not, with or without a SIM card wired to the NFC controller SWP interface, etc...) and thus driver code will never know before hand which SEs are available. So we remove this field, it will be replaced by a real SE discovery mechanism. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-06-14NFC: HCI: Follow a positive code path in the HCI ops implementationsSamuel Ortiz
Exiting on the error case is more typical to the kernel coding style. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-06-14NFC: HCI: Implement fw_upload opsEric Lapuyade
This is a simple forward to the HCI driver. When driver is done with the operation, it shall directly notify NFC Core by calling nfc_fw_upload_done(). Signed-off-by: Eric Lapuyade <eric.lapuyade@intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-01-10NFC: Initial Secure Element APISamuel Ortiz
Each NFC adapter can have several links to different secure elements and that property needs to be exported by the drivers. A secure element link can be enabled and disabled, and card emulation will be handled by the currently active one. Otherwise card emulation will be host implemented. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-01-10NFC: Add HCI quirks to support driver (non)standard implementationsEric Lapuyade
Some chips diverge from the HCI spec in their implementation of standard features. This adds a new quirks parameter to nfc_hci_allocate_device() to let the driver indicate its divergence. Signed-off-by: Eric Lapuyade <eric.lapuyade@intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-01-10NFC: Fixed skb leak in tm_send() nfc and hci ops implementationsEric Lapuyade
Signed-off-by: Eric Lapuyade <eric.lapuyade@intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-01-10NFC: Changed event_received hci ops result semanticEric Lapuyade
Some chips use a standard HCI event code, destined to a proprietary gate, with a different meaning. Therefore, the HCI driver must always have a chance to intercept the event before standard processing is attempted. The new semantic specifies that the result value "1" means that the driver doesn't especially handle the event. result <= 0 means it was handled. Signed-off-by: Eric Lapuyade <eric.lapuyade@intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-01-10NFC: Added error handling in event_received hci opsEric Lapuyade
There is no use to return an error if the caller doesn't get it. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-01-10NFC: Fixed nfc core and hci unregistration and cleanupEric Lapuyade
When an adapter is removed, it will unregister itself from hci and/or nfc core. In order to do that safely, work tasks must first be canceled and prevented to be scheduled again, before the hci or nfc device can be destroyed. Signed-off-by: Eric Lapuyade <eric.lapuyade@intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-11-19NFC: Export nfc_hci_sak_to_protocol()Eric Lapuyade
Some HCI drivers will need it. Signed-off-by: Eric Lapuyade <eric.lapuyade@intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-11-19NFC: Export nfc_hci_result_to_errno as it can be needed by HCI driversEric Lapuyade
Signed-off-by: Eric Lapuyade <eric.lapuyade@intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-11-19NFC: Dot not dispatch HCI event received on unopened pipeEric Lapuyade
A chip with pre-opened gates may send events on a gate that nobody has opened in the handset host. Discard those events. Signed-off-by: Eric Lapuyade <eric.lapuyade@intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-11-19NFC: Ignore err when chip doesn't implement HW/SW info registersEric Lapuyade
NFC_HCI_ID_MGMT_VERSION_SW and NFC_HCI_ID_MGMT_VERSION_HW are optional registers for gate NFC_HCI_ID_MGMT_GATE in standard HCI. When chip doesn't implement, just leave all the information as zeros. Signed-off-by: Eric Lapuyade <eric.lapuyade@intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-10-26NFC: Fix some code style and whitespace issuesSzymon Janc
Signed-off-by: Szymon Janc <szymon.janc@tieto.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-10-26NFC: Fix sparse warnings due to missing staticArron Wang
Signed-off-by: Arron Wang <arron.wang@intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-10-26NFC: Implement HCI DEP send and receive dataArron Wang
And implement the corresponding hooks for pn544. Signed-off-by: Arron Wang <arron.wang@intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-10-26NFC: Implement HCI DEP link up and downArron Wang
And implement the corresponding hooks for pn544. Signed-off-by: Arron Wang <arron.wang@intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-10-26NFC: Handle pn544 continue activationArron Wang
We need to send continue activation command to allow NFCIP-1 activation when a NFC target has been discovered in type A or type F reader gate. Signed-off-by: Arron Wang <arron.wang@intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-10-26NFC: Pass hardware specific HCI event to driverArron Wang
Signed-off-by: Arron Wang <arron.wang@intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-10-02workqueue: avoid using deprecated functionsLinus Torvalds
The network merge brought in a few users of functions that got deprecated by the workqueue cleanups: the 'system_nrt_wq' is now the same as the regular system_wq, since all workqueues are now non- reentrant. Similarly, remove one use of flush_work_sync() - the regular flush_work() has become synchronous, and the "_sync()" version is thus deprecated as being superfluous. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-09-25NFC: Add HCI module descriptionEric Lapuyade
Signed-off-by: Eric Lapuyade <eric.lapuyade@intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-09-25NFC: Changed HCI and PN544 HCI driver to use the new HCI LLC CoreEric Lapuyade
The previous shdlc HCI driver and its header are removed from the tree. PN544 now registers directly with HCI and passes the name of the llc it requires (shdlc). HCI instantiation now allocates the required llc instance. The llc is started when the HCI device is brought up. Signed-off-by: Eric Lapuyade <eric.lapuyade@intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-09-25NFC: Add an LLC Core layer to HCIEric Lapuyade
The LLC layer manages modules that control the link layer protocol (such as shdlc) between HCI and an HCI driver. The driver must simply specify the required llc when it registers with HCI. Signed-off-by: Eric Lapuyade <eric.lapuyade@intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-09-25NFC: Modified hci_transceive to become an asynchronous operationEric Lapuyade
This enables the completion callback to be called from a different context, preventing a possible deadlock if the callback resulted in the invocation of a nested call to the currently locked nfc_dev. This is also more in line with the im_transceive nfc_ops for NFC Core or NCI drivers which already behave asynchronously. Signed-off-by: Eric Lapuyade <eric.lapuyade@intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-09-25NFC: Changed the HCI cmd execution callback prototypeEric Lapuyade
Make it match the data_exchange_cb_t so that it can be used directly in the implementation of an asynchronous hci_transceive Signed-off-by: Eric Lapuyade <eric.lapuyade@intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-09-25NFC: Remove pointless conditional before HCI kfree_skb()Wei Yongjun
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-09-25NFC: Use system_nrt_wq instead of custom onesTejun Heo
NFC is using a number of custom ordered workqueues w/ WQ_MEM_RECLAIM. WQ_MEM_RECLAIM is unnecessary unless NFC is gonna be used as transport for storage device, and all use cases match one work item to one ordered workqueue - IOW, there's no actual ordering going on at all and using system_nrt_wq gives the same behavior. There's nothing to be gained by using custom workqueues. Use system_nrt_wq instead and drop all the custom ones. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-07-17Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless
2012-07-12NFC: Set target nfcid1 for all HCI reader A targetsEric Lapuyade
Without the discovered target nfcid1 and its length set properly, type 2 tags detection fails with the pn544 as it checks for them from pn544_hci_complete_target_discovered(). Signed-off-by: Eric Lapuyade <eric.lapuyade@intel.com> Reported-by: Mathias Jeppsson <mathias.jeppsson@sonymobile.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-22 07:04:20 +0000