summaryrefslogtreecommitdiff
path: root/net/mac80211
AgeCommit message (Collapse)Author
2020-07-13net: mac80211: kerneldoc fixesAndrew Lunn
Simple fixes which require no deep knowledge of the code. Cc: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-25mac80211: allow rx of mesh eapol frames with default rx keyMarkus Theil
Without this patch, eapol frames cannot be received in mesh mode, when 802.1X should be used. Initially only a MGTK is defined, which is found and set as rx->key, when there are no other keys set. ieee80211_drop_unencrypted would then drop these eapol frames, as they are data frames without encryption and there exists some rx->key. Fix this by differentiating between mesh eapol frames and other data frames with existing rx->key. Allow mesh mesh eapol frames only if they are for our vif address. With this patch in-place, ieee80211_rx_h_mesh_fwding continues after the ieee80211_drop_unencrypted check and notices, that these eapol frames have to be delivered locally, as they should. Signed-off-by: Markus Theil <markus.theil@tu-ilmenau.de> Link: https://lore.kernel.org/r/20200625104214.50319-1-markus.theil@tu-ilmenau.de [small code cleanups] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-06-25mac80211: skip mpath lookup also for control port txMarkus Theil
When using 802.1X over mesh networks, at first an ordinary mesh peering is established, then the 802.1X EAPOL dialog happens, afterwards an authenticated mesh peering exchange (AMPE) happens, finally the peering is complete and we can set the STA authorized flag. As 802.1X is an intermediate step here and key material is not yet exchanged for stations we have to skip mesh path lookup for these EAPOL frames. Otherwise the already configure mesh group encryption key would be used to send a mesh path request which no one can decipher, because we didn't already establish key material on both peers, like with SAE and directly using AMPE. Signed-off-by: Markus Theil <markus.theil@tu-ilmenau.de> Link: https://lore.kernel.org/r/20200617082637.22670-2-markus.theil@tu-ilmenau.de [remove pointless braces, remove unnecessary local variable, the list can only process one such frame (or its fragments)] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-06-25mac80211: Fix dropping broadcast packets in 802.11 encapSeevalamuthu Mariappan
Broadcast pkts like arp are getting dropped in 'ieee80211_8023_xmit'. Fix this by replacing is_valid_ether_addr api with is_zero_ether_addr. Fixes: 50ff477a8639 ("mac80211: add 802.11 encapsulation offloading support") Signed-off-by: Seevalamuthu Mariappan <seevalam@codeaurora.org> Link: https://lore.kernel.org/r/1591697754-4975-1-git-send-email-seevalam@codeaurora.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-06-25mac80211: simplify mesh codePavel Machek
Doing mod_timer() conditionaly is easier than conditionally unlocking and jumping around... Signed-off-by: Pavel Machek (CIP) <pavel@denx.de> Acked-by: Linus Lüssing <ll@simonwunderlich.de> Link: https://lore.kernel.org/r/20200604214157.GA9737@amd Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-06-25mac80211: fix control port tx status checkMarkus Theil
The initial control port tx status patch assumed, that we have IEEE 802.11 frames, but actually ethernet frames are stored in the ack skb. Fix this by checking for the correct ethertype and skb protocol 802.3. Also allow tx status reports for ETH_P_PREAUTH, as preauth frames can also be send over the nl80211 control port. Fixes: a7528198add8 ("mac80211: support control port TX status reporting") Reported-by: Jouni Malinen <j@w1.fi> Signed-off-by: Markus Theil <markus.theil@tu-ilmenau.de> Reported-by: kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/r/20200622123542.173695-1-markus.theil@tu-ilmenau.de Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-06-13Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds
Pull networking fixes from David Miller: 1) Fix cfg80211 deadlock, from Johannes Berg. 2) RXRPC fails to send norigications, from David Howells. 3) MPTCP RM_ADDR parsing has an off by one pointer error, fix from Geliang Tang. 4) Fix crash when using MSG_PEEK with sockmap, from Anny Hu. 5) The ucc_geth driver needs __netdev_watchdog_up exported, from Valentin Longchamp. 6) Fix hashtable memory leak in dccp, from Wang Hai. 7) Fix how nexthops are marked as FDB nexthops, from David Ahern. 8) Fix mptcp races between shutdown and recvmsg, from Paolo Abeni. 9) Fix crashes in tipc_disc_rcv(), from Tuong Lien. 10) Fix link speed reporting in iavf driver, from Brett Creeley. 11) When a channel is used for XSK and then reused again later for XSK, we forget to clear out the relevant data structures in mlx5 which causes all kinds of problems. Fix from Maxim Mikityanskiy. 12) Fix memory leak in genetlink, from Cong Wang. 13) Disallow sockmap attachments to UDP sockets, it simply won't work. From Lorenz Bauer. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (83 commits) net: ethernet: ti: ale: fix allmulti for nu type ale net: ethernet: ti: am65-cpsw-nuss: fix ale parameters init net: atm: Remove the error message according to the atomic context bpf: Undo internal BPF_PROBE_MEM in BPF insns dump libbpf: Support pre-initializing .bss global variables tools/bpftool: Fix skeleton codegen bpf: Fix memlock accounting for sock_hash bpf: sockmap: Don't attach programs to UDP sockets bpf: tcp: Recv() should return 0 when the peer socket is closed ibmvnic: Flush existing work items before device removal genetlink: clean up family attributes allocations net: ipa: header pad field only valid for AP->modem endpoint net: ipa: program upper nibbles of sequencer type net: ipa: fix modem LAN RX endpoint id net: ipa: program metadata mask differently ionic: add pcie_print_link_status rxrpc: Fix race between incoming ACK parser and retransmitter net/mlx5: E-Switch, Fix some error pointer dereferences net/mlx5: Don't fail driver on failure to create debugfs net/mlx5e: CT: Fix ipv6 nat header rewrite actions ...
2020-06-14treewide: replace '---help---' in Kconfig files with 'help'Masahiro Yamada
Since commit 84af7a6194e4 ("checkpatch: kconfig: prefer 'help' over '---help---'"), the number of '---help---' has been gradually decreasing, but there are still more than 2400 instances. This commit finishes the conversion. While I touched the lines, I also fixed the indentation. There are a variety of indentation styles found. a) 4 spaces + '---help---' b) 7 spaces + '---help---' c) 8 spaces + '---help---' d) 1 space + 1 tab + '---help---' e) 1 tab + '---help---' (correct indentation) f) 1 tab + 1 space + '---help---' g) 1 tab + 2 spaces + '---help---' In order to convert all of them to 1 tab + 'help', I ran the following commend: $ find . -name 'Kconfig*' | xargs sed -i 's/^[[:space:]]*---help---/\thelp/' Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-06-08net: fix wiki website url mac80211 and wireless filesFlavio Suligoi
In the files: - net/mac80211/rx.c - net/wireless/Kconfig the wiki url is still the old "wireless.kernel.org" instead of the new "wireless.wiki.kernel.org" Signed-off-by: Flavio Suligoi <f.suligoi@asem.it> Link: https://lore.kernel.org/r/20200605154112.16277-10-f.suligoi@asem.it Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-06-05mac80211: initialize return flags in HE 6 GHz operation parsingJohannes Berg
Dan points out that if ieee80211_chandef_he_6ghz_oper() succeeds, we don't initialize 'ret'. Initialize it to 0 in this case, since everything went fine and nothing has to be disabled. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Fixes: 57fa5e85d53c ("mac80211: determine chandef from HE 6 GHz operation") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Link: https://lore.kernel.org/r/20200603111500.bd2a5ff37b83.I2c3f338ce343b581db493eb9a0d988d1b626c8fb@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-05-31Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller
xdp_umem.c had overlapping changes between the 64-bit math fix for the calculation of npgs and the removal of the zerocopy memory type which got rid of the chunk_size_nohdr member. The mlx5 Kconfig conflict is a case where we just take the net-next copy of the Kconfig entry dependency as it takes on the ESWITCH dependency by one level of indirection which is what the 'net' conflicting change is trying to ensure. Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-31mac80211: set short_slot for 6 GHz bandTova Mussai
Set short slot also for 6 GHz band, just like 5 GHz. Signed-off-by: Tova Mussai <tova.mussai@intel.com> Link: https://lore.kernel.org/r/20200528213443.75f38e6f5efd.I272fbae402b03123f04e9ae69204eeab960c70cd@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-05-31mac80211: Consider 6 GHz band when handling power constraintIlan Peer
Treat it like the 5 GHz band. Signed-off-by: Ilan Peer <ilan.peer@intel.com> Link: https://lore.kernel.org/r/20200528213443.889e5c9dd006.Id8ed3bb8000ba8738be5df05639415eb2e23c61a@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-05-31mac80211: accept aggregation sessions on 6 GHzJohannes Berg
On 6 GHz, stations don't have ht_supported set, but they can still do aggregation since they must have HE, allow that. Link: https://lore.kernel.org/r/20200528213443.776d3c891b64.Ifa099d450617b50c691832b3c4aa08959fab520a@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-05-31mac80211: Add HE 6GHz capabilities element to probe requestIlan Peer
On 6 GHz, the 6 GHz capabilities element should be added, do that. Signed-off-by: Ilan Peer <ilan.peer@intel.com> [add commit message] Link: https://lore.kernel.org/r/20200528213443.8ee764f0cde0.I2b0c66b60e11818c97c9803e04a6a197c6376243@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-05-31mac80211: use HE 6 GHz band capability and pass it to the driverJohannes Berg
In order to handle 6 GHz AP side, take the HE 6 GHz band capability data and pass it to the driver (which needs it for A-MPDU spacing and A-MPDU length). Link: https://lore.kernel.org/r/1589399105-25472-6-git-send-email-rmanohar@codeaurora.org Co-developed-by: Rajkumar Manoharan <rmanohar@codeaurora.org> Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org> Link: https://lore.kernel.org/r/20200528213443.784e4890d82f.I5f1230d5ab27e84e7bbe88e3645b24ea15a0c146@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-05-31mac80211: check the correct bit for EMA APShaul Triebitz
An AP supporting EMA (Enhanced Multi-BSSID advertisement) should set bit 83 in the extended capabilities IE (9.4.2.26 in the 802.11ax D5 spec). So the *3rd* bit of the 10th byte should be checked. Also, in one place, the wrong byte was checked. (cfg80211_find_ie returns a pointer to the beginning of the IE, so the data really starts at ie[2], so the 10th byte should be ie[12]. To avoid this confusion, use cfg80211_find_elem instead). Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com> Link: https://lore.kernel.org/r/20200528213443.4316121fa2a3.I9745582f8d41ad8e689dac0fefcd70b276d7c1ea@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-05-31mac80211: determine chandef from HE 6 GHz operationJohannes Berg
Support connecting to HE 6 GHz APs and mesh networks on 6 GHz, where the HT/VHT information is missing but instead the HE 6 GHz band capability is present, and the 6 GHz Operation information field is used to encode the channel configuration instead of the HT/VHT operation elements. Also add some other bits needed to connect to 6 GHz networks. Link: https://lore.kernel.org/r/1589399105-25472-10-git-send-email-rmanohar@codeaurora.org Co-developed-by: Rajkumar Manoharan <rmanohar@codeaurora.org> Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org> Link: https://lore.kernel.org/r/20200528213443.25687d2695bc.I3f9747c1147480f65445f13eda5c4a5ed4e86757@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-05-31mac80211: avoid using ext NSS high BW if not supportedJohannes Berg
If the AP advertises inconsistent data, namely it has CCFS1 or CCFS2, but doesn't advertise support for 160/80+80 bandwidth or "Extended NSS BW Support", then we cannot use any MCSes in the the higher bandwidth. Thus, avoid connecting with higher bandwidth since it's less efficient that way. Link: https://lore.kernel.org/r/20200528213443.0e55d40c3ccc.I6fd0b4708ebd087e5e46466c3e91f6efbcbef668@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-05-31mac80211: do not allow HT/VHT IEs in 6 GHz mesh modeRajkumar Manoharan
As HT/VHT elements are not allowed in 6 GHz band, do not include them in mesh beacon template formation. Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org> Link: https://lore.kernel.org/r/1589399105-25472-9-git-send-email-rmanohar@codeaurora.org Link: https://lore.kernel.org/r/20200528193455.76796-2-johannes@sipsolutions.net Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-05-31mac80211: build HE operation with 6 GHz oper informationRajkumar Manoharan
Add 6 GHz operation information (IEEE 802.11ax/D6.0, Figure 9-787k) while building HE operation element for non-HE AP. This field is used to determine channel information in the absence of HT/VHT IEs. Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org> Link: https://lore.kernel.org/r/1589399105-25472-8-git-send-email-rmanohar@codeaurora.org [fix skb allocation size] Link: https://lore.kernel.org/r/20200528193455.76796-1-johannes@sipsolutions.net Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-05-31mac80211: add HE 6 GHz Band Capability elementRajkumar Manoharan
Construct HE 6 GHz band capability element (IEEE 802.11ax/D6.0, 9.4.2.261) for association request and mesh beacon. The 6 GHz capability information is passed by driver through iftypes caps. Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org> Link: https://lore.kernel.org/r/1589399105-25472-7-git-send-email-rmanohar@codeaurora.org [handle SMPS, adjust for previous patches, reserve SKB space properly, change to handle SKB directly] Link: https://lore.kernel.org/r/20200528213443.643aa8101111.I3f9747c1147480f65445f13eda5c4a5ed4e86757@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-05-31mac80211: add HE 6 GHz Band Capabilities into parse extensionRajkumar Manoharan
Handle 6 GHz band capability element parsing for association. Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org> Link: https://lore.kernel.org/r/1589399105-25472-4-git-send-email-rmanohar@codeaurora.org [some renaming to be in line with previous patches] Link: https://lore.kernel.org/r/20200528213443.a13d7a0b85b0.Ia07584da4fc77aa77c4cc563248d2ce4234ffe5d@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-05-28mac80211: support control port TX status reportingMarkus Theil
Add support for TX status reporting for the control port TX API; this will be used by hostapd when it moves to the control port TX API. Signed-off-by: Markus Theil <markus.theil@tu-ilmenau.de> Link: https://lore.kernel.org/r/20200527160334.19224-1-markus.theil@tu-ilmenau.de [fix commit message, it was referring to nl80211] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-05-27mac80211: fix HT-Control field reception for management framesJohannes Berg
If we receive management frames with an HT-Control field, we cannot parse them properly, as we assume a fixed length management header. Since we don't even need the HTC field (for these frames, or really at all), just remove it at the beginning of RX. Reported-by: Haggai Abramovsky <haggai.abramovsky@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Link: https://lore.kernel.org/r/20200526143346.cf5ce70521c5.I333251a084ec4cfe67b7ef7efe2d2f1a33883931@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-05-27mac80211: allow SA-QUERY processing in userspaceJohannes Berg
As discussed with Mathy almost two years ago in http://lore.kernel.org/r/20180806224857.14853-1-Mathy.Vanhoef@cs.kuleuven.be we should let userspace process SA-QUERY frames if it wants to, so that it can handle OCV (operating channel validation) which mac80211 doesn't know how to. Evidently I had been expecting Mathy to (re)send such a patch, but he never did, perhaps expecting me to do it after our discussion. In any case, this came up now with OCV getting more attention, so move the code around as discussed there to let userspace handle it, and do it properly. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Link: https://lore.kernel.org/r/20200526103131.1f9cf7e5b6db.Iae5b42b09ad2b1cbcbe13492002c43f0d1d51dfc@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-05-27nl80211: add ability to report TX status for control port TXMarkus Theil
This adds the necessary capabilities in nl80211 to allow drivers to assign a cookie to control port TX frames (returned via extack in the netlink ACK message of the command) and then later report the frame's status. Signed-off-by: Markus Theil <markus.theil@tu-ilmenau.de> Link: https://lore.kernel.org/r/20200508144202.7678-2-markus.theil@tu-ilmenau.de [use extack cookie instead of explicit message, recombine patches] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-05-27mac80211: Replace zero-length array with flexible-arrayGustavo A. R. Silva
The current codebase makes use of the zero-length array language extension to the C90 standard, but the preferred mechanism to declare variable-length types such as these ones is a flexible array member[1][2], introduced in C99: struct foo { int stuff; struct boo array[]; }; By making use of the mechanism above, we will get a compiler warning in case the flexible array does not occur last in the structure, which will help us prevent some kind of undefined behavior bugs from being inadvertently introduced[3] to the codebase from now on. Also, notice that, dynamic memory allocations won't be affected by this change: "Flexible array members have incomplete type, and so the sizeof operator may not be applied. As a quirk of the original implementation of zero-length arrays, sizeof evaluates to zero."[1] sizeof(flexible-array-member) triggers a warning because flexible array members have incomplete type[1]. There are some instances of code in which the sizeof operator is being incorrectly/erroneously applied to zero-length arrays and the result is zero. Such instances may be hiding some bugs. So, this work (flexible-array member conversions) will also help to get completely rid of those sorts of issues. This issue was found with the help of Coccinelle. [1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html [2] https://github.com/KSPP/linux/issues/21 [3] commit 76497732932f ("cxgb3/l2t: Fix undefined behaviour") Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Link: https://lore.kernel.org/r/20200507185907.GA15102@embeddedor Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-05-27nl80211: support scan frequencies in KHzThomas Pedersen
If the driver advertises NL80211_EXT_FEATURE_SCAN_FREQ_KHZ userspace can omit NL80211_ATTR_SCAN_FREQUENCIES in favor of an NL80211_ATTR_SCAN_FREQ_KHZ. To get scan results in KHz userspace must also set the NL80211_SCAN_FLAG_FREQ_KHZ. This lets nl80211 remain compatible with older userspaces while not requring and sending redundant (and potentially incorrect) scan frequency sets. Signed-off-by: Thomas Pedersen <thomas@adapt-ip.com> Link: https://lore.kernel.org/r/20200430172554.18383-4-thomas@adapt-ip.com [use just nla_nest_start() (not _noflag) for NL80211_ATTR_SCAN_FREQ_KHZ] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-05-27cfg80211: add KHz variants of frame RX APIThomas Pedersen
Drivers may wish to report the RX frequency in units of KHz. Provide cfg80211_rx_mgmt_khz() and wrap it with cfg80211_rx_mgmt() so exisiting drivers which can't report KHz anyway don't need to change. Add a similar wrapper for cfg80211_report_obss_beacon() so the frequency units stay somewhat consistent. This doesn't actually change the nl80211 API yet. Signed-off-by: Thomas Pedersen <thomas@adapt-ip.com> Link: https://lore.kernel.org/r/20200430172554.18383-2-thomas@adapt-ip.com [fix mac80211 calling the non-khz version of obss beacon report, drop trace point name changes] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-05-27mac80211: fix variable names in TID config methodsSergey Matyukevich
Fix all variable names from 'tid' to 'tids' to avoid confusion. Now this is not TID number, but TID mask. Signed-off-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com> Link: https://lore.kernel.org/r/20200424112905.26770-3-sergey.matyukevich.os@quantenna.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-05-26Merge tag 'mac80211-next-for-net-next-2020-04-25' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next Johannes Berg says: ==================== One batch of changes, containing: * hwsim improvements from Jouni and myself, to be able to test more scenarios easily * some more HE (802.11ax) support * some initial S1G (sub 1 GHz) work for fractional MHz channels * some (action) frame registration updates to help DPP support * along with other various improvements/fixes ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-25mac80211: mesh: fix discovery timer re-arming issue / crashLinus Lüssing
On a non-forwarding 802.11s link between two fairly busy neighboring nodes (iperf with -P 16 at ~850MBit/s TCP; 1733.3 MBit/s VHT-MCS 9 80MHz short GI VHT-NSS 4), so with frequent PREQ retries, usually after around 30-40 seconds the following crash would occur: [ 1110.822428] Unable to handle kernel read from unreadable memory at virtual address 00000000 [ 1110.830786] Mem abort info: [ 1110.833573] Exception class = IABT (current EL), IL = 32 bits [ 1110.839494] SET = 0, FnV = 0 [ 1110.842546] EA = 0, S1PTW = 0 [ 1110.845678] user pgtable: 4k pages, 48-bit VAs, pgd = ffff800076386000 [ 1110.852204] [0000000000000000] *pgd=00000000f6322003, *pud=00000000f62de003, *pmd=0000000000000000 [ 1110.861167] Internal error: Oops: 86000004 [#1] PREEMPT SMP [ 1110.866730] Modules linked in: pppoe ppp_async batman_adv ath10k_pci ath10k_core ath pppox ppp_generic nf_conntrack_ipv6 mac80211 iptable_nat ipt_REJECT ipt_MASQUERADE cfg80211 xt_time xt_tcpudp xt_state xt_nat xt_multiport xt_mark xt_mac xt_limit xt_conntrack xt_comment xt_TCPMSS xt_REDIRECT xt_LOG xt_FLOWOFFLOAD slhc nf_reject_ipv4 nf_nat_redirect nf_nat_masquerade_ipv4 nf_conntrack_ipv4 nf_nat_ipv4 nf_nat nf_log_ipv4 nf_flow_table_hw nf_flow_table nf_defrag_ipv6 nf_defrag_ipv4 nf_conntrack_rtcache nf_conntrack iptable_mangle iptable_filter ip_tables crc_ccitt compat nf_log_ipv6 nf_log_common ip6table_mangle ip6table_filter ip6_tables ip6t_REJECT x_tables nf_reject_ipv6 usb_storage xhci_plat_hcd xhci_pci xhci_hcd dwc3 usbcore usb_common [ 1110.932190] Process swapper/3 (pid: 0, stack limit = 0xffff0000090c8000) [ 1110.938884] CPU: 3 PID: 0 Comm: swapper/3 Not tainted 4.14.162 #0 [ 1110.944965] Hardware name: LS1043A RGW Board (DT) [ 1110.949658] task: ffff8000787a81c0 task.stack: ffff0000090c8000 [ 1110.955568] PC is at 0x0 [ 1110.958097] LR is at call_timer_fn.isra.27+0x24/0x78 [ 1110.963055] pc : [<0000000000000000>] lr : [<ffff0000080ff29c>] pstate: 00400145 [ 1110.970440] sp : ffff00000801be10 [ 1110.973744] x29: ffff00000801be10 x28: ffff000008bf7018 [ 1110.979047] x27: ffff000008bf87c8 x26: ffff000008c160c0 [ 1110.984352] x25: 0000000000000000 x24: 0000000000000000 [ 1110.989657] x23: dead000000000200 x22: 0000000000000000 [ 1110.994959] x21: 0000000000000000 x20: 0000000000000101 [ 1111.000262] x19: ffff8000787a81c0 x18: 0000000000000000 [ 1111.005565] x17: ffff0000089167b0 x16: 0000000000000058 [ 1111.010868] x15: ffff0000089167b0 x14: 0000000000000000 [ 1111.016172] x13: ffff000008916788 x12: 0000000000000040 [ 1111.021475] x11: ffff80007fda9af0 x10: 0000000000000001 [ 1111.026777] x9 : ffff00000801bea0 x8 : 0000000000000004 [ 1111.032080] x7 : 0000000000000000 x6 : ffff80007fda9aa8 [ 1111.037383] x5 : ffff00000801bea0 x4 : 0000000000000010 [ 1111.042685] x3 : ffff00000801be98 x2 : 0000000000000614 [ 1111.047988] x1 : 0000000000000000 x0 : 0000000000000000 [ 1111.053290] Call trace: [ 1111.055728] Exception stack(0xffff00000801bcd0 to 0xffff00000801be10) [ 1111.062158] bcc0: 0000000000000000 0000000000000000 [ 1111.069978] bce0: 0000000000000614 ffff00000801be98 0000000000000010 ffff00000801bea0 [ 1111.077798] bd00: ffff80007fda9aa8 0000000000000000 0000000000000004 ffff00000801bea0 [ 1111.085618] bd20: 0000000000000001 ffff80007fda9af0 0000000000000040 ffff000008916788 [ 1111.093437] bd40: 0000000000000000 ffff0000089167b0 0000000000000058 ffff0000089167b0 [ 1111.101256] bd60: 0000000000000000 ffff8000787a81c0 0000000000000101 0000000000000000 [ 1111.109075] bd80: 0000000000000000 dead000000000200 0000000000000000 0000000000000000 [ 1111.116895] bda0: ffff000008c160c0 ffff000008bf87c8 ffff000008bf7018 ffff00000801be10 [ 1111.124715] bdc0: ffff0000080ff29c ffff00000801be10 0000000000000000 0000000000400145 [ 1111.132534] bde0: ffff8000787a81c0 ffff00000801bde8 0000ffffffffffff 000001029eb19be8 [ 1111.140353] be00: ffff00000801be10 0000000000000000 [ 1111.145220] [< (null)>] (null) [ 1111.149917] [<ffff0000080ff77c>] run_timer_softirq+0x184/0x398 [ 1111.155741] [<ffff000008081938>] __do_softirq+0x100/0x1fc [ 1111.161130] [<ffff0000080a2e28>] irq_exit+0x80/0xd8 [ 1111.166002] [<ffff0000080ea708>] __handle_domain_irq+0x88/0xb0 [ 1111.171825] [<ffff000008081678>] gic_handle_irq+0x68/0xb0 [ 1111.177213] Exception stack(0xffff0000090cbe30 to 0xffff0000090cbf70) [ 1111.183642] be20: 0000000000000020 0000000000000000 [ 1111.191461] be40: 0000000000000001 0000000000000000 00008000771af000 0000000000000000 [ 1111.199281] be60: ffff000008c95180 0000000000000000 ffff000008c19360 ffff0000090cbef0 [ 1111.207101] be80: 0000000000000810 0000000000000400 0000000000000098 ffff000000000000 [ 1111.214920] bea0: 0000000000000001 ffff0000089167b0 0000000000000000 ffff0000089167b0 [ 1111.222740] bec0: 0000000000000000 ffff000008c198e8 ffff000008bf7018 ffff000008c19000 [ 1111.230559] bee0: 0000000000000000 0000000000000000 ffff8000787a81c0 ffff000008018000 [ 1111.238380] bf00: ffff00000801c000 ffff00000913ba34 ffff8000787a81c0 ffff0000090cbf70 [ 1111.246199] bf20: ffff0000080857cc ffff0000090cbf70 ffff0000080857d0 0000000000400145 [ 1111.254020] bf40: ffff000008018000 ffff00000801c000 ffffffffffffffff ffff0000080fa574 [ 1111.261838] bf60: ffff0000090cbf70 ffff0000080857d0 [ 1111.266706] [<ffff0000080832e8>] el1_irq+0xe8/0x18c [ 1111.271576] [<ffff0000080857d0>] arch_cpu_idle+0x10/0x18 [ 1111.276880] [<ffff0000080d7de4>] do_idle+0xec/0x1b8 [ 1111.281748] [<ffff0000080d8020>] cpu_startup_entry+0x20/0x28 [ 1111.287399] [<ffff00000808f81c>] secondary_start_kernel+0x104/0x110 [ 1111.293662] Code: bad PC value [ 1111.296710] ---[ end trace 555b6ca4363c3edd ]--- [ 1111.301318] Kernel panic - not syncing: Fatal exception in interrupt [ 1111.307661] SMP: stopping secondary CPUs [ 1111.311574] Kernel Offset: disabled [ 1111.315053] CPU features: 0x0002000 [ 1111.318530] Memory Limit: none [ 1111.321575] Rebooting in 3 seconds.. With some added debug output / delays we were able to push the crash from the timer callback runner into the callback function and by that shedding some light on which object holding the timer gets corrupted: [ 401.720899] Unable to handle kernel read from unreadable memory at virtual address 00000868 [...] [ 402.335836] [<ffff0000088fafa4>] _raw_spin_lock_bh+0x14/0x48 [ 402.341548] [<ffff000000dbe684>] mesh_path_timer+0x10c/0x248 [mac80211] [ 402.348154] [<ffff0000080ff29c>] call_timer_fn.isra.27+0x24/0x78 [ 402.354150] [<ffff0000080ff77c>] run_timer_softirq+0x184/0x398 [ 402.359974] [<ffff000008081938>] __do_softirq+0x100/0x1fc [ 402.365362] [<ffff0000080a2e28>] irq_exit+0x80/0xd8 [ 402.370231] [<ffff0000080ea708>] __handle_domain_irq+0x88/0xb0 [ 402.376053] [<ffff000008081678>] gic_handle_irq+0x68/0xb0 The issue happens due to the following sequence of events: 1) mesh_path_start_discovery(): -> spin_unlock_bh(&mpath->state_lock) before mesh_path_sel_frame_tx() 2) mesh_path_free_rcu() -> del_timer_sync(&mpath->timer) [...] -> kfree_rcu(mpath) 3) mesh_path_start_discovery(): -> mod_timer(&mpath->timer, ...) [...] -> rcu_read_unlock() 4) mesh_path_free_rcu()'s kfree_rcu(): -> kfree(mpath) 5) mesh_path_timer() starts after timeout, using freed mpath object So a use-after-free issue due to a timer re-arming bug caused by an early spin-unlocking. This patch fixes this issue by re-checking if mpath is about to be free'd and if so bails out of re-arming the timer. Cc: stable@vger.kernel.org Fixes: 050ac52cbe1f ("mac80211: code for on-demand Hybrid Wireless Mesh Protocol") Cc: Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by: Linus Lüssing <ll@simonwunderlich.de> Link: https://lore.kernel.org/r/20200522170413.14973-1-linus.luessing@c0d3.blue Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-04-30docs: networking: convert mac80211-injection.txt to ReSTMauro Carvalho Chehab
- add SPDX header; - adjust title markup; - mark code blocks and literals as such; - mark tables as such; - adjust identation, whitespaces and blank lines; - add to networking/index.rst. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-29mac80211: fix memory overlap due to variable length paramRajkumar Manoharan
As of now HE operation element in bss_conf includes variable length optional field followed by other HE variable. Though the optional field never be used, actually it is referring to next member of the bss_conf structure which is not correct. Fix it by declaring needed HE operation fields within bss_conf itself. Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org> Link: https://lore.kernel.org/r/1587768108-25248-2-git-send-email-rmanohar@codeaurora.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-04-29mac80211: TX legacy rate control for Beacon framesJouni Malinen
Use the Beacon frame specific legacy rate configuration, if specified for AP or mesh, instead of the generic rate mask when selecting the TX rate for Beacon frames. Signed-off-by: Jouni Malinen <jouni@codeaurora.org> Link: https://lore.kernel.org/r/20200425155713.25687-4-jouni@codeaurora.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-04-24mac80211: fix two missing documentation entriesJohannes Berg
Add documentation for two struct entries that was missing. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Link: https://lore.kernel.org/r/20200424123945.6b23a26ab5e7.I664440ab5f33442df8103253bf5b9fe84be8d58c@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-04-24mac80211: add freq_offset to RX statusThomas Pedersen
RX status needs a KHz component, so add freq_offset. We can reduce the bits for the frequency since 60 GHz isn't supported. Signed-off-by: Thomas Pedersen <thomas@adapt-ip.com> Link: https://lore.kernel.org/r/20200402011810.22947-5-thomas@adapt-ip.com [fix commit message] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-04-24mac80211: handle channel frequency offsetThomas Pedersen
cfg80211_chan_def and ieee80211_channel recently gained a frequency offset component. Handle this where it makes sense (potentially required by S1G channels). For IBSS, TDLS, CSA, and ROC we return -EOPNOTSUPP if a channel with frequency offset is passed, since they may or may not work. Once someone tests and verifies these commands work on thos types of channels, we can remove that error. join_ocb and join_mesh look harmless because they use a simple ieee80211_vif_use_channel(), which is using an already verified channel, so we let those through. Signed-off-by: Thomas Pedersen <thomas@adapt-ip.com> Link: https://lore.kernel.org/r/20200402011810.22947-4-thomas@adapt-ip.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-04-24mac80211: minstrel_ht_assign_best_tp_rates: remove redundant testJohannes Berg
We know this pointer isn't NULL and in fact dereferenced it before, remove the redundant test. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20200326150855.adf551928846.Iae9015573d6c350cc1b12a311d6d13d086beec6c@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-04-24mac80211: Fail association when AP has no legacy ratesIlan Peer
The MLME logic had a workaround that allowed to continue an association with an AP even if the AP did not provide any basic rates in its supported rates in the association response, assuming that the first (non basic) legacy rate could be used as a basic rate. However, this did not consider the case where the AP (which is obviously buggy) did not provide any legacy rate. Fix this by failing the association, as this can result in an unexpected failure in the low level driver and FW, e.g., in rate scale logic etc. Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20200326150855.d70a1450d83f.I6e6ce5efda351a8544c0e7bfeee260fe3360d401@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-04-24mac80211: agg-tx: add an option to defer ADDBA transmitMordechay Goodstein
Driver tells mac80211 to sends ADDBA with SSN (starting sequence number) from the head of the queue, while the transmission of all the frames in the queue may take a while, which causes the peer to time out. In order to fix this scenario, add an option to defer ADDBA transmit until queue is drained. Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20200326150855.0f27423fec75.If67daab123a27c1cbddef000d6a3f212aa6309ef@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-04-24mac80211: agg-tx: refactor sending addbaMordechay Goodstein
We move the actual arming the timer and sending ADDBA to a function for the use in different places calling the same logic. Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20200326150855.58a337eb90a1.I75934e6464535fbf43969acc796bc886291e79a5@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-04-24mac80211: Skip entries with HE membership selectorIlan Peer
When parsing supported rates IE. Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20200326150855.ed3e66f8c197.I93aad0e5ddb7ce79f05f8153922acb9aa5076d38@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-04-24mac80211: Don't destroy auth data in case of anti-cloggingAndrei Otcheretianski
SAE AP may reject authentication with WLAN_STATUS_ANTI_CLOG_REQUIRED. As the user space will immediately continue the authentication flow, there is no need to destroy the authentication data in this case. This saves unneeded station removal and releasing the channel. Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20200326150855.7483996157a8.I8040a842874aaf6d209df3fc8a2acb97a0bf508b@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-04-24mac80211: add twt_protected flag to the bss_conf structureShaul Triebitz
Add a flag to the BSS conf whether the BSS and STA support protected TWT. Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20200326150855.1dcb2d16fa74.I74d7c007dad2601d2e39f54612fe6554dd5ab386@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-04-24mac80211: implement Operating Mode Notification extended NSS supportJohannes Berg
Somehow we missed this for a long time, but similar to the extended NSS support in VHT capabilities, we need to have this in Operating Mode notification. Implement it by * parsing the 160/80+80 bit there and setting the bandwidth appropriately * having callers of ieee80211_get_vht_max_nss() pass in the current max NSS value as received in the operating mode notification in order to modify it appropriately depending on the extended NSS bits. This updates all drivers that use it, i.e. only iwlwifi/mvm. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20200326150855.098483728cfa.I4e8c25d3288441759c2793247197229f0696a37d@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-04-24mac80211: Process multicast RX registration for Action framesJouni Malinen
Convert a user space registration for processing multicast Action frames (NL80211_CMD_REGISTER_FRAME with NL80211_ATTR_RECEIVE_MULTICAST) to a new enum ieee80211_filter_flags bit FIF_MCAST_ACTION so that drivers can update their RX filter parameters appropriately, if needed. Signed-off-by: Jouni Malinen <jouni@codeaurora.org> Link: https://lore.kernel.org/r/20200421144815.19175-1-jouni@codeaurora.org [rename variables to rx_mcast_action_reg indicating action frames only] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-04-24cfg80211: change internal management frame registration APIJohannes Berg
Almost all drivers below cfg80211 get the API wrong (except for cfg80211) and are unable to cope with multiple registrations for the same frame type, which is valid due to the match filter. This seems to indicate the API is wrong, and we should maintain the full information in cfg80211 instead of the drivers. Change the API to no longer inform the driver about individual registrations and unregistrations, but rather every time about the entire state of the entire wiphy and single wdev, whenever it may have changed. This also simplifies the code in cfg80211 as it no longer has to track exactly what was unregistered and can free things immediately. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com> Reviewed-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com> Link: https://lore.kernel.org/r/20200417124300.f47f3828afc8.I7f81ef59c2c5a340d7075fb3c6d0e08e8aeffe07@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-04-24mac80211: Report beacon protection failures to user spaceJouni Malinen
Report received Beacon frames that do not have a valid MME MIC when beacon protection is enabled. This covers both the cases of no MME in the received frame and invalid MIC in the MME. Signed-off-by: Jouni Malinen <jouni@codeaurora.org> Link: https://lore.kernel.org/r/20200401142548.6990-2-jouni@codeaurora.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-30 15:32:32 +0000