summaryrefslogtreecommitdiff
path: root/net/mac80211
AgeCommit message (Collapse)Author
2014-12-17mac80211: free management frame keys when removing stationJohannes Berg
When writing the code to allow per-station GTKs, I neglected to take into account the management frame keys (index 4 and 5) when freeing the station and only added code to free the first four data frame keys. Fix this by iterating the array of keys over the right length. Cc: stable@vger.kernel.org Fixes: e31b82136d1a ("cfg80211/mac80211: allow per-station GTKs") Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-12-12mac80211: update the channel context after channel switchEmmanuel Grumbach
When the channel switch has been made, a vif is now using the channel context which was reserved. When that happens, we need to update the channel context since its parameters may change. I hit a case in which I switched to a 40Mhz channel but the reserved channel context was still on 20Mhz. The rate control would try to send 40Mhz packets on a 20Mhz channel context and that made iwlwifi's firmware unhappy. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-12-12mac80211: fix multicast LED blinking and counterAndreas Müller
As multicast-frames can't be fragmented, "dot11MulticastReceivedFrameCount" stopped being incremented after the use-after-free fix. Furthermore, the RX-LED will be triggered by every multicast frame (which wouldn't happen before) which wouldn't allow the LED to rest at all. Fixes https://bugzilla.kernel.org/show_bug.cgi?id=89431 which also had the patch. Cc: stable@vger.kernel.org Fixes: b8fff407a180 ("mac80211: fix use-after-free in defragmentation") Signed-off-by: Andreas Müller <goo@stapelspeicher.org> [rewrite commit message] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-12-12mac80211: avoid using uninitialized stack dataJes Sorensen
Avoid a case where we would access uninitialized stack data if the AP advertises HT support without 40MHz channel support. Cc: stable@vger.kernel.org Fixes: f3000e1b43f1 ("mac80211: fix broken use of VHT/20Mhz with some APs") Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-12-08Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless
2014-12-04Merge git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-nextJohn W. Linville
Johannes Berg <johannes@sipsolutions.net> says: "This time I have Felix's no-status rate control work, which will allow drivers to work better with rate control even if they don't have perfect status reporting. In addition to this, a small hwsim fix from Patrik, one of the regulatory patches from Arik, and a number of cleanups and fixes I did myself. Of note is a patch where I disable CFG80211_WEXT so that compatibility is no longer selectable - this is intended as a wake-up call for anyone who's still using it, and is still easily worked around (it's a one-line patch) before we fully remove the code as well in the future." Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-11-28mac80211: add ieee80211_tx_status_noskbFelix Fietkau
This can be used by drivers that cannot reliably map tx status information onto specific skbs. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-11-28mac0211: add a helper function for fixing up tx status ratesFelix Fietkau
Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-11-28mac80211: pass tx info to ieee80211_lost_packet instead of an skbFelix Fietkau
Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-11-28mac80211: minstrel_ht: switch to .tx_status_noskbFelix Fietkau
Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-11-28mac80211: minstrel: switch to .tx_status_noskbFelix Fietkau
Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-11-28mac80211: add tx_status_noskb to rate_control_opsFelix Fietkau
This op works like .tx_status, except it does not need access to the skb. This will be used by drivers that cannot match tx status information to specific packets. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-11-28mac80211: minstrel_ht: move aggregation check to .get_rate()Felix Fietkau
Preparation for adding a no-skb tx status path Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-11-28mac80211: add more missing checks for VHT tx ratesFelix Fietkau
Fixes a crash on attempting to calculate the frame duration for a VHT packet (which needs to be handled by hw/driver instead). Reported-by: Jouni Malinen <j@w1.fi> Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-11-27mac80211: copy chandef from AP vif to VLANsFelix Fietkau
Instead of keeping track of all those special cases where VLAN interfaces have no bss_conf.chandef, just make sure they have the same as the AP interface they belong to. Among others, this fixes a crash getting a VLAN's channel from userspace since a NULL channel is returned as a good result (return value 0) for VLANs since the commit below. Cc: stable@vger.kernel.org [3.18 only] Fixes: c12bc4885f4b3 ("mac80211: return the vif's chandef in ieee80211_cfg_get_channel()") Signed-off-by: Felix Fietkau <nbd@openwrt.org> [rewrite commit log] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-11-26cfg80211: clean up beacon loss CQM eventJohannes Berg
Having it as a sub-event for RSSI thresholds is very ugly, but luckily no userspace actually uses the events yet. Move the event to its own function call internally and to its own event attribute in nl80211. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-11-25mac80211: check if channels allow 80 MHz for VHT probe requestsJohannes Berg
If there are no channels allowing 80 MHz to be used, then the station isn't really VHT capable even if the driver and device support it in general. In this case, exclude the VHT capability IE from probe request frames. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-11-24mac80211: disable 80+80/160 in VHT correctlyJohannes Berg
The supported bandwidth field is a two-bit field, not a bitmap, so treat it accordingly when disabling 80+80 or 160 MHz. Note that we can only advertise "80+80 and 160" or "160", not "80+80" by itself, so disabling 160 also disables 80+80. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-11-20Merge tag 'mac80211-next-for-john-2014-11-20' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next Johannes Berg <johannes@sipsolutions.net> says: "It has been a while since my last pull request, so we accumulated another relatively large set of changes: * TDLS off-channel support set from Arik/Liad, with some support patches I did * custom regulatory fixes from Arik * minstrel VHT fix (and a small optimisation) from Felix * add back radiotap vendor namespace support (myself) * random MAC address scanning for cfg80211/mac80211/hwsim (myself) * CSA improvements (Luca) * WoWLAN Net Detect (wake on network found) support (Luca) * and lots of other smaller changes from many people" Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-11-19Merge commit '4e6ce4dc7ce71d0886908d55129d5d6482a27ff9' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless
2014-11-19mac80211: minstrel_ht: add a small optimization to minstrel_aggr_checkFelix Fietkau
Check the queue mapping earlier, skb->queue_mapping is more likely than skb->data to still be in d-cache. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-11-19mac80211: notify drivers on sta rate table changesJohannes Berg
This allows drivers with a firmware or chip-based rate lookup table to use the most recent default rate selection without having to get it from per-packet data or explicit ieee80211_get_tx_rate calls Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-11-19mac80211: skip legacy rate mask handling for VHT ratesFelix Fietkau
The rate mask code currently assumes that a rate is legacy if IEEE80211_TX_RC_MCS is not set. This might be the cause of bogus VHT rates being reported with minstrel_ht. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-11-19mac80211: don't allow 40MHz tx rates in case of 20MHz chandefEliad Peller
When 20MHz chandef is used, 40MHz rates shouldn't be used (by the rate-control algorithm), even if the sta ht capabilities indicate support for it. Signed-off-by: Eliad Peller <eliadx.peller@intel.com> Singed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-11-19mac80211: allow drivers to support NL80211_SCAN_FLAG_RANDOM_ADDRJohannes Berg
Allow drivers to support NL80211_SCAN_FLAG_RANDOM_ADDR with software based scanning and generate a random MAC address for them for every scan request with the flag. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-11-19mac80211: rcu-ify scan and scheduled scan request pointersJohannes Berg
In order to use the scan and scheduled scan request pointers during RX to check for randomisation, make them accessible using RCU. Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-11-19mac80211: remove redundant checkEliad Peller
local->scan_req was tested in the previous line, so it can't be NULL. Signed-off-by: Eliad Peller <eliadx.peller@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-11-19mac80211: synchronously reserve TID per stationLiad Kaufman
In TDLS (e.g., TDLS off-channel) there is a requirement for some drivers to supply an unused TID between the AP and the device to the FW, to allow sending PTI requests and to allow the FW to aggregate on a specific TID for better throughput. To ensure that the allocated TID is indeed unused, this patch introduces an API for blocking the driver from TXing on that TID. Signed-off-by: Liad Kaufman <liad.kaufman@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-11-19mac80211: add specific-queue flushing supportLiad Kaufman
If the HW supports IEEE80211_HW_QUEUE_CONTROL, allow flushing only specific queues rather than all of them. Signed-off-by: Liad Kaufman <liad.kaufman@intel.com> Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-11-19mac80211: add TDLS channel-switch Rx flowArik Nemtsov
When receiving a TDLS channel switch request or response, parse the frame and call a new tdls_recv_channel_switch op in the low level driver with the parsed data. Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com> Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-11-19mac80211: introduce TDLS channel switch opsArik Nemtsov
Implement the cfg80211 TDLS channel switch ops and introduce new mac80211 ones for low-level drivers. Verify low-level driver support for the new ops when using the relevant wiphy feature bit. Also verify the peer supports channel switching before passing the command down. Add a new STA flag to track the off-channel state with the TDLS peer and make sure to cancel the channel-switch if the peer STA is unexpectedly removed. Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com> Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-11-19mac80211: add parsing of TDLS specific IEsArik Nemtsov
These are used in TDLS channel switching code. Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com> Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-11-19mac80211: prepare TDLS mgmt code for channel-switch templatesArik Nemtsov
Split the data-generating from the Tx-sending functionality, as we do not want to send templates to the lower driver. Also add an optional chandef argument to the data-generating portion. It will be used for channel-switch templates. Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com> Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-11-19mac80211: track AP and peer STA TDLS chan-switch supportArik Nemtsov
The AP or peer can prohibit TDLS channel switch via a bit in the extended capabilities IE. Parse the IE and track this bit. Set an appropriate STA flag if both the AP and peer STA support TDLS channel-switching. Add the new STA flag and the missing TDLS_INITIATOR to debugfs. Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com> Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-11-19cfg/mac80211: define TDLS channel switch feature bitArik Nemtsov
Define some related TDLS protocol constants and advertise channel switch support in the extended-capabilities IE when the feature bit is defined. Actually supporting TDLS channel-switching also requires support for some new nl80211 commands, to be introduced by future patches. Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com> Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-11-19mac80211: add BSS coex IE to TDLS setup framesArik Nemtsov
Add the BSS coex IE in case we support HT40 channels, as mandated by section 8.5.13 in IEEE802.11 2012. Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com> Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-11-19mac80211: add supported channels IE during TDLS setupArik Nemtsov
This information element is mandatory in case TDLS channel-switching is to be supported. The channels given are ones supported and allowed to be active in the current regulatory setting. Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com> Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-11-19mac80211: add function to create data frame template including keyJohannes Berg
For some TDLS channel switch implementations data frames need to be sent by the firmware based on a template. This template should be created by mac80211, and thus needs to properly be built from an 802.3 frame into an 802.11 frame. In addition, the device will need the key information so the select_key handler needs to be run. However, the driver/device will be responsible for all of the crypto encapsulation, as the sequence numbers etc. cannot be built by the host anyway in this case since it's a template to be used multiple times. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-11-19mac80211: factor out 802.11 header building codeJohannes Berg
Factor out the 802.11 header building code from the xmit function to be able to use it separately in a later commit. While at it, fix up some documentation. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-11-19mac80211: move skb info band assignment outJohannes Berg
Instead of passing the band as a parameter to ieee80211_xmit() and ieee80211_tx(), move it outside of the two functions while making sure info->band is set up before calling them. This removes the parameter and simplifies the follow commit. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-11-19mac80211: retransmit TDLS teardown packet through AP if not ACKedLiad Kaufman
Since the TDLS peer station might not receive the teardown packet (e.g., when in PS), this makes sure the packet is retransmitted - this time through the AP - if the TDLS peer didn't ACK the packet. Signed-off-by: Liad Kaufman <liad.kaufman@intel.com> Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-11-19mac80211: add option for setting skb flags before xmitLiad Kaufman
Allows setting of an skb's flags - if needed - when calling ieee80211_subif_start_xmit(). Signed-off-by: Liad Kaufman <liad.kaufman@intel.com> Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-11-18mac80211: minstrel_ht: fix a crash in rate sortingFelix Fietkau
The commit 5935839ad73583781b8bbe8d91412f6826e218a4 "mac80211: improve minstrel_ht rate sorting by throughput & probability" introduced a crash on rate sorting that occurs when the rate added to the sorting array is faster than all the previous rates. Due to an off-by-one error, it reads the rate index from tp_list[-1], which contains uninitialized stack garbage, and then uses the resulting index for accessing the group rate stats, leading to a crash if the garbage value is big enough. Cc: Thomas Huehn <thomas@net.t-labs.tu-berlin.de> Reported-by: Jouni Malinen <j@w1.fi> Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-11-11mac80211: refactor duplicate detectionJohannes Berg
Put duplicate detection into its own RX handler, and separate out the conditions a bit to make the code more readable. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-11-10mac80211: add back support for radiotap vendor namespace dataJohannes Berg
Radiotap vendor namespace data might still be useful, but we reverted it because it used too much space in the RX status. Put it back, but address the space problem by using a single bit only and putting everything else into the skb->data. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-11-10cfg80211/mac80211: allow any interface to send channel switch notificationsLuciano Coelho
For multi-vif channel switches, we want to send NL80211_CMD_CH_SWITCH_NOTIFY to the userspace to let it decide whether other interfaces need to be moved as well. This is needed when we want a P2P GO interface to follow the channel of a station, for example. Modify the code so that all interfaces can send CSA notifications. Additionally, send notifications for STA CSA as well. Signed-off-by: Luciano Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-11-10mac80211: send channel switch started notificationsLuciano Coelho
Send a channel switch notification to userspace when a channel switch is requested or when we react to a remote CSA. Signed-off-by: Luciano Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-11-10mac80211: add device_timestamp to the drv_pre_channel_switch traceLuciano Coelho
The device_timestamp value was left out of the event trace for drv_pre_channel_switch by mistake. Add it. Signed-off-by: Luciano Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-11-10mac80211: fix order of setting ch_switch and drv_pre_channel_switch callLuciano Coelho
There was a mistake when merging commit 6d027bcc (mac80211: add pre_channel_switch driver operation) for upstream. The assignment of the values in the ch_switch structure came below the call to drv_pre_channel_switch. Fix the order. Fixes: 6d027bcc (mac80211: add pre_channel_switch driver operation) Signed-off-by: Luciano Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-11-06mac80211: Fix regression that triggers a kernel BUG with CCMPRonald Wahl
Commit 7ec7c4a9a686c608315739ab6a2b0527a240883c (mac80211: port CCMP to cryptoapi's CCM driver) introduced a regression when decrypting empty packets (data_len == 0). This will lead to backtraces like: (scatterwalk_start) from [<c01312f4>] (scatterwalk_map_and_copy+0x2c/0xa8) (scatterwalk_map_and_copy) from [<c013a5a0>] (crypto_ccm_decrypt+0x7c/0x25c) (crypto_ccm_decrypt) from [<c032886c>] (ieee80211_aes_ccm_decrypt+0x160/0x170) (ieee80211_aes_ccm_decrypt) from [<c031c628>] (ieee80211_crypto_ccmp_decrypt+0x1ac/0x238) (ieee80211_crypto_ccmp_decrypt) from [<c032ef28>] (ieee80211_rx_handlers+0x870/0x1d24) (ieee80211_rx_handlers) from [<c0330c7c>] (ieee80211_prepare_and_rx_handle+0x8a0/0x91c) (ieee80211_prepare_and_rx_handle) from [<c0331260>] (ieee80211_rx+0x568/0x730) (ieee80211_rx) from [<c01d3054>] (__carl9170_rx+0x94c/0xa20) (__carl9170_rx) from [<c01d3324>] (carl9170_rx_stream+0x1fc/0x320) (carl9170_rx_stream) from [<c01cbccc>] (carl9170_usb_tasklet+0x80/0xc8) (carl9170_usb_tasklet) from [<c00199dc>] (tasklet_hi_action+0x88/0xcc) (tasklet_hi_action) from [<c00193c8>] (__do_softirq+0xcc/0x200) (__do_softirq) from [<c0019734>] (irq_exit+0x80/0xe0) (irq_exit) from [<c0009c10>] (handle_IRQ+0x64/0x80) (handle_IRQ) from [<c000c3a0>] (__irq_svc+0x40/0x4c) (__irq_svc) from [<c0009d44>] (arch_cpu_idle+0x2c/0x34) Such packets can appear for example when using the carl9170 wireless driver because hardware sometimes generates garbage when the internal FIFO overruns. This patch adds an additional length check. Cc: stable@vger.kernel.org Fixes: 7ec7c4a9a686 ("mac80211: port CCMP to cryptoapi's CCM driver") Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Ronald Wahl <ronald.wahl@raritan.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-01 11:09:25 +0000