summaryrefslogtreecommitdiff
path: root/net/mac80211
AgeCommit message (Collapse)Author
2016-08-11mac80211: call get_expected_throughput only after adding stationMaxim Altshul
Depending on which method the driver implements, userspace could call this (indirectly, by getting station info) before the driver knows about the station, possibly causing it to misbehave. Therefore, add a check for sta->uploaded which indicates that the driver knows about the station. Signed-off-by: Maxim Altshul <maxim.altshul@ti.com> [reword commit message] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-08-11mac80211: remove skb header offset mangling in ieee80211_build_hdrFelix Fietkau
Since the code only touches the MAC headers, the offsets to the network/transport headers remain the same throughout this function. Remove pointless pieces of code that try to 'preserve' them. Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-08-11mac80211: mesh: Add support for HW RC implementationMaxim Altshul
Mesh HWMP module will be able to rely on the HW RC algorithm if it exists, for path metric calculations. This allows the metric calculation mechanism to calculate a correct metric, based on PER and last TX rate both via HW RC algorithm if it exists or via parameters collected by the SW. Signed-off-by: Maxim Altshul <maxim.altshul@ti.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-08-05mac80211: Add ieee80211_hw pointer to get_expected_throughputMaxim Altshul
The variable is added to allow the driver an easy access to it's own hw->priv when the op is invoked. This fixes a crash in wlcore because it was relying on a station pointer that wasn't initialized yet. It's the wrong way to fix the crash, but it solves the problem for now and it does make sense to have the hw pointer here. Signed-off-by: Maxim Altshul <maxim.altshul@ti.com> [rewrite commit message, fix indentation] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-08-05mac80211: End the MPSP even if EOSP frame was not ackedMasashi Honma
If QoS frame with EOSP (end of service period) subfield=1 sent by local peer was not acked by remote peer, local peer did not end the MPSP. This prevents local peer from going to DOZE state. And if the remote peer goes away without closing connection, local peer continues AWAKE state and wastes battery. Signed-off-by: Masashi Honma <masashi.honma@gmail.com> Acked-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-08-05mac80211: fix purging multicast PS buffer queueFelix Fietkau
The code currently assumes that buffered multicast PS frames don't have a pending ACK frame for tx status reporting. However, hostapd sends a broadcast deauth frame on teardown for which tx status is requested. This can lead to the "Have pending ack frames" warning on module reload. Fix this by using ieee80211_free_txskb/ieee80211_purge_tx_queue. Cc: stable@vger.kernel.org Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-08-03mac80211: mesh: flush stations before beacons are stoppedMaital Hahn
Some drivers (e.g. wl18xx) expect that the last stage in the de-initialization process will be stopping the beacons, similar to AP flow. Update ieee80211_stop_mesh() flow accordingly. As peers can be removed dynamically, this would not impact other drivers. Tested also on Ralink RT3572 chipset. Signed-off-by: Maital Hahn <maitalm@ti.com> Signed-off-by: Yaniv Machani <yanivma@ti.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-08-02mac80211: fix check for buffered powersave frames with txqFelix Fietkau
The logic was inverted here, set the bit if frames are pending. Fixes: ba8c3d6f16a1 ("mac80211: add an intermediate software queue implementation") Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-07-06cfg80211: Add mesh peer AID setting APIMasashi Honma
Previously, mesh power management functionality works only with kernel MPM. Because user space MPM did not report mesh peer AID to kernel, the kernel could not identify the bit in TIM element. So this patch adds mesh peer AID setting API. Signed-off-by: Masashi Honma <masashi.honma@gmail.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-07-06mac80211: parse wide bandwidth channel switch IE with workaroundJohannes Berg
Continuing the workaround implemented in commit 23665aaf9170 ("mac80211: Interoperability workaround for 80+80 and 160 MHz channels") use the same code to parse the Wide Bandwidth Channel Switch element by converting to VHT Operation element since the spec also just refers to that for parsing semantics, particularly with the workaround. While at it, remove some dead code - the IEEE80211_STA_DISABLE_40MHZ flag can never be set at this point since it's checked earlier and the wide_bw_chansw_ie pointer is set to NULL if it's set. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-07-06mac80211: report failure to start (partial) scan as scan abortJohannes Berg
Rather than reporting the scan as having completed, report it as being aborted. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-07-06mac80211: Add support for beacon report radio measurementAvraham Stern
Add the following to support beacon report radio measurement with the measurement mode field set to passive or active: 1. Propagate the required scan duration to the device 2. Report the scan start time (in terms of TSF) 3. Report each BSS's detection time (also in terms of TSF) TSF times refer to the BSS that the interface that requested the scan is connected to. Signed-off-by: Assaf Krauss <assaf.krauss@intel.com> Signed-off-by: Avraham Stern <avraham.stern@intel.com> [changed ath9k/10k, at76c59x-usb, iwlegacy, wl1251 and wlcore to match the new API] Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-07-06nl80211: support beacon report scanningAvraham Stern
Beacon report radio measurement requires reporting observed BSSs on the channels specified in the beacon request. If the measurement mode is set to passive or active, it requires actually performing a scan (passive or active, accordingly), and reporting the time that the scan was started and the time each beacon/probe was received (both in terms of TSF of the BSS of the requesting AP). If the request mode is table, this information is optional. In addition, the radio measurement request specifies the channel dwell time for the measurement. In order to use scan for beacon report when the mode is active or passive, add a parameter to scan request that specifies the channel dwell time, and add scan start time and beacon received time to scan results information. Supporting beacon report is required for Multi Band Operation (MBO). Signed-off-by: Assaf Krauss <assaf.krauss@intel.com> Signed-off-by: David Spinadel <david.spinadel@intel.com> Signed-off-by: Avraham Stern <avraham.stern@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-07-06mac80211: agg-rx: refuse ADDBA Request with timeout updateJohannes Berg
The current implementation of handling ADDBA Request while a session is already active with the peer is wrong - in case the peer is using the existing session's dialog token this should be treated as update to the session, which can update the timeout value. We don't really have a good way of supporting that, so reject, but implement the required behaviour in the spec of "Even if the updated ADDBA Request frame is not accepted, the original Block ACK setup remains active." (802.11-2012 10.5.4) Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-06-30mac80211: fix fq lockdep warningsMichal Kazior
Some lockdep assertions were not fulfilled and resulted in a kernel warning/call trace if driver used intermediate software queues (e.g. ath10k). Existing code sequences should've guaranteed safety but it's always good to be extra careful. The call trace could look like this: [ 237.335805] ------------[ cut here ]------------ [ 237.335852] WARNING: CPU: 3 PID: 1921 at include/net/fq_impl.h:22 fq_flow_dequeue+0xed/0x140 [mac80211] [ 237.335855] Modules linked in: ath10k_pci(E-) ath10k_core(E) ath(E) mac80211(E) cfg80211(E) [ 237.335913] CPU: 3 PID: 1921 Comm: rmmod Tainted: G W E 4.7.0-rc4-wt-ath+ #1377 [ 237.335916] Hardware name: Hewlett-Packard HP ProBook 6540b/1722, BIOS 68CDD Ver. F.04 01/27/2010 [ 237.335918] 00200286 00200286 eff85dac c14151e2 f901574e 00000000 eff85de0 c1081075 [ 237.335928] c1ab91f0 00000003 00000781 f901574e 00000016 f8fbabad f8fbabad 00000016 [ 237.335938] eb24ff60 00000000 ef3886c0 eff85df4 c10810ba 00000009 00000000 00000000 [ 237.335948] Call Trace: [ 237.335953] [<c14151e2>] dump_stack+0x76/0xb4 [ 237.335957] [<c1081075>] __warn+0xe5/0x100 [ 237.336002] [<f8fbabad>] ? fq_flow_dequeue+0xed/0x140 [mac80211] [ 237.336046] [<f8fbabad>] ? fq_flow_dequeue+0xed/0x140 [mac80211] [ 237.336053] [<c10810ba>] warn_slowpath_null+0x2a/0x30 [ 237.336095] [<f8fbabad>] fq_flow_dequeue+0xed/0x140 [mac80211] [ 237.336137] [<f8fbc67a>] fq_flow_reset.constprop.56+0x2a/0x90 [mac80211] [ 237.336180] [<f8fbc79a>] fq_reset.constprop.59+0x2a/0x50 [mac80211] [ 237.336222] [<f8fc04e8>] ieee80211_txq_teardown_flows+0x38/0x40 [mac80211] [ 237.336258] [<f8f7c1a4>] ieee80211_unregister_hw+0xe4/0x120 [mac80211] [ 237.336275] [<f933f536>] ath10k_mac_unregister+0x16/0x50 [ath10k_core] [ 237.336292] [<f934592d>] ath10k_core_unregister+0x3d/0x90 [ath10k_core] [ 237.336301] [<f85f8836>] ath10k_pci_remove+0x36/0xa0 [ath10k_pci] [ 237.336307] [<c1470388>] pci_device_remove+0x38/0xb0 ... Fixes: 5caa328e3811 ("mac80211: implement codel on fair queuing flows") Fixes: fa962b92120b ("mac80211: implement fair queueing per txq") Tested-by: Kalle Valo <kvalo@qca.qualcomm.com> Reported-by: Kalle Valo <kvalo@qca.qualcomm.com> Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
2016-06-30mac80211: use common cleanup for user/!user_mpmBob Copeland
We've accumulated a couple of different fixes now to mesh_sta_cleanup() due to the different paths that user_mpm and !user_mpm cases take -- one fix to flush nexthop paths and one to fix the counting. The only caller of mesh_plink_deactivate() is mesh_sta_cleanup(), so we can push the user_mpm checks down into there in order to share more code. In doing so, we can remove an extra call to mesh_path_flush_by_nexthop() and the (unnecessary) call to mesh_accept_plinks_update(). This will also ensure the powersaving state code gets called in the user_mpm case. The only cleanup tasks we need to avoid when MPM is in user-space are sending the peering frames and stopping the plink timer, so wrap those in the appropriate check. Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
2016-06-30mac80211: Encrypt "Group addressed privacy" action framesMasashi Honma
Previously, the action frames to group address was not encrypted. But [1] "Table 8-38 Category values" indicates "Mesh" and "Multihop" category action frames should be encrypted (Group addressed privacy == yes). And the encyption key should be MGTK ([1] 10.13 Group addressed robust management frame procedures). So this patch modifies the code to make it suitable for spec. [1] IEEE Std 802.11-2012 Signed-off-by: Masashi Honma <masashi.honma@gmail.com> Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
2016-06-30mac80211: silence an uninitialized variable warningDan Carpenter
We normally return an uninitialized value, but no one checks it so it doesn't matter. Anyway, let's silence the static checker warning. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
2016-06-30Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Several cases of overlapping changes, except the packet scheduler conflicts which deal with the addition of the free list parameter to qdisc_enqueue(). Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-28mac80211: Fix mesh estab_plinks counting in STA removal caseJouni Malinen
If a user space program (e.g., wpa_supplicant) deletes a STA entry that is currently in NL80211_PLINK_ESTAB state, the number of established plinks counter was not decremented and this could result in rejecting new plink establishment before really hitting the real maximum plink limit. For !user_mpm case, this decrementation is handled by mesh_plink_deactive(). Fix this by decrementing estab_plinks on STA deletion (mesh_sta_cleanup() gets called from there) so that the counter has a correct value and the Beacon frame advertisement in Mesh Configuration element shows the proper value for capability to accept additional peers. Cc: stable@vger.kernel.org Signed-off-by: Jouni Malinen <j@w1.fi> Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
2016-06-10Merge tag 'mac80211-next-for-davem-2016-06-09' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next Johannes Berg says: ==================== For the next cycle, we have the following: * the biggest change is Michał's work on integrating FQ/codel with the mac80211 internal software queues * cfg80211 connect result gets clarified for the "no connection at all" case * advertisement of per-interface type capabilities, in case they differ (which makes a lot of sense for some capabilities) * most of the nl80211 & hwsim unprivileged namespace operation changes * human-readable VHT capabilities in debugfs * some other cleanups, like spelling ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-09mac80211: implement codel on fair queuing flowsMichal Kazior
There is no other limit other than a global packet count limit when using software queuing. This means a single flow queue can grow insanely long. This is particularly bad for TCP congestion algorithms which requires a little more sophisticated frame dropping scheme than a mere headdrop on limit overflow. Hence apply (a slighly modified, to fit the knobs) CoDel5 on flow queues. This improves TCP convergence and stability when combined with wireless driver which keeps its own tx queue/fifo at a minimum fill level for given link conditions. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-06-09mac80211: add debug knobs for fair queuingMichal Kazior
This adds a debugfs entry to read and modify some fq parameters. This makes it easy to debug, test and experiment. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> [remove module parameter for now] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-06-09mac80211: implement fair queueing per txqMichal Kazior
mac80211's software queues were designed to work very closely with device tx queues. They are required to make use of 802.11 packet aggregation easily and efficiently. Due to the way 802.11 aggregation is designed it only makes sense to keep fair queuing as close to hardware as possible to reduce induced latency and inertia and provide the best flow responsiveness. This change doesn't translate directly to immediate and significant gains. End result depends on driver's induced latency. Best results can be achieved if driver keeps its own tx queue/fifo fill level to a minimum. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-06-09mac80211: skip netdev queue control with software queuingMichal Kazior
Qdiscs are designed with no regard to 802.11 aggregation requirements and hand out packet-by-packet with no guarantee they are destined to the same tid. This does more bad than good no matter how fairly a given qdisc may behave on an ethernet interface. Software queuing used per-AC netdev subqueue congestion control whenever a global AC limit was hit. This meant in practice a single station or tid queue could starve others rather easily. This could resonate with qdiscs in a bad way or could just end up with poor aggregation performance. Increasing the AC limit would increase induced latency which is also bad. Disabling qdiscs by default and performing taildrop instead of netdev subqueue congestion control on the other hand makes it possible for tid queues to fill up "in the meantime" while preventing stations starving each other. This increases aggregation opportunities and should allow software queuing based drivers achieve better performance by utilizing airtime more efficiently with big aggregates. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-05-31mac80211: add vht cap decode to debugfsBen Greear
This makes it a lot easier to understand the capabilities used by the station: VHT supported cap: 0x300819b2 MAX-MPDU-11454 80Mhz RXLDPC SHORT-GI-80 TXSTBC RXSTBC_1 SU-BEAMFORMER-CAPABLE SU-BEAMFORMEE-CAPABLE BEAMFORMEE-STS: 0x0 SOUNDING-DIMENSIONS: 0x0 MU-BEAMFORMER-CAPABLE MPDU-LENGTH-EXPONENT: 0x0 LINK-ADAPTATION-VHT-MRQ-MFB: 0x0 RX-ANTENNA-PATTERN TX-ANTENNA-PATTERN RX MCS: fffe TX MCS: fffe Signed-off-by: Ben Greear <greearb@candelatech.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-05-31mac80211: fix fast_tx header alignmentFelix Fietkau
The header field is defined as u8[] but also accessed as struct ieee80211_hdr. Enforce an alignment of 2 to prevent unnecessary unaligned accesses, which can be very harmful for performance on many platforms. Fixes: e495c24731a2 ("mac80211: extend fast-xmit for more ciphers") Cc: stable@vger.kernel.org Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-05-31mac80211: mesh: flush mesh paths unconditionallyBob Copeland
Currently, the mesh paths associated with a nexthop station are cleaned up in the following code path: __sta_info_destroy_part1 synchronize_net() __sta_info_destroy_part2 -> cleanup_single_sta -> mesh_sta_cleanup -> mesh_plink_deactivate -> mesh_path_flush_by_nexthop However, there are a couple of problems here: 1) the paths aren't flushed at all if the MPM is running in userspace (e.g. when using wpa_supplicant or authsae) 2) there is no synchronize_rcu between removing the path and readers accessing the nexthop, which means the following race is possible: CPU0 CPU1 ~~~~ ~~~~ sta_info_destroy_part1() synchronize_net() rcu_read_lock() mesh_nexthop_resolve() mpath = mesh_path_lookup() [...] -> mesh_path_flush_by_nexthop() sta = rcu_dereference( mpath->next_hop) kfree(sta) access sta <-- CRASH Fix both of these by unconditionally flushing paths before destroying the sta, and by adding a synchronize_net() after path flush to ensure no active readers can still dereference the sta. Fixes this crash: [ 348.529295] BUG: unable to handle kernel paging request at 00020040 [ 348.530014] IP: [<f929245d>] ieee80211_mps_set_frame_flags+0x40/0xaa [mac80211] [ 348.530014] *pde = 00000000 [ 348.530014] Oops: 0000 [#1] PREEMPT [ 348.530014] Modules linked in: drbg ansi_cprng ctr ccm ppp_generic slhc ipt_MASQUERADE nf_nat_masquerade_ipv4 8021q ] [ 348.530014] CPU: 0 PID: 20597 Comm: wget Tainted: G O 4.6.0-rc5-wt=V1 #1 [ 348.530014] Hardware name: To Be Filled By O.E.M./To be filled by O.E.M., BIOS 080016 11/07/2014 [ 348.530014] task: f64fa280 ti: f4f9c000 task.ti: f4f9c000 [ 348.530014] EIP: 0060:[<f929245d>] EFLAGS: 00010246 CPU: 0 [ 348.530014] EIP is at ieee80211_mps_set_frame_flags+0x40/0xaa [mac80211] [ 348.530014] EAX: f4ce63e0 EBX: 00000088 ECX: f3788416 EDX: 00020008 [ 348.530014] ESI: 00000000 EDI: 00000088 EBP: f6409a4c ESP: f6409a40 [ 348.530014] DS: 007b ES: 007b FS: 0000 GS: 0033 SS: 0068 [ 348.530014] CR0: 80050033 CR2: 00020040 CR3: 33190000 CR4: 00000690 [ 348.530014] Stack: [ 348.530014] 00000000 f4ce63e0 f5f9bd80 f6409a64 f9291d80 0000ce67 f5d51e00 f4ce63e0 [ 348.530014] f3788416 f6409a80 f9291dc1 f4ce8320 f4ce63e0 f5d51e00 f4ce63e0 f4ce8320 [ 348.530014] f6409a98 f9277f6f 00000000 00000000 0000007c 00000000 f6409b2c f9278dd1 [ 348.530014] Call Trace: [ 348.530014] [<f9291d80>] mesh_nexthop_lookup+0xbb/0xc8 [mac80211] [ 348.530014] [<f9291dc1>] mesh_nexthop_resolve+0x34/0xd8 [mac80211] [ 348.530014] [<f9277f6f>] ieee80211_xmit+0x92/0xc1 [mac80211] [ 348.530014] [<f9278dd1>] __ieee80211_subif_start_xmit+0x807/0x83c [mac80211] [ 348.530014] [<c04df012>] ? sch_direct_xmit+0xd7/0x1b3 [ 348.530014] [<c022a8c6>] ? __local_bh_enable_ip+0x5d/0x7b [ 348.530014] [<f956870c>] ? nf_nat_ipv4_out+0x4c/0xd0 [nf_nat_ipv4] [ 348.530014] [<f957e036>] ? iptable_nat_ipv4_fn+0xf/0xf [iptable_nat] [ 348.530014] [<c04c6f45>] ? netif_skb_features+0x14d/0x30a [ 348.530014] [<f9278e10>] ieee80211_subif_start_xmit+0xa/0xe [mac80211] [ 348.530014] [<c04c769c>] dev_hard_start_xmit+0x1f8/0x267 [ 348.530014] [<c04c7261>] ? validate_xmit_skb.isra.120.part.121+0x10/0x253 [ 348.530014] [<c04defc6>] sch_direct_xmit+0x8b/0x1b3 [ 348.530014] [<c04c7a9c>] __dev_queue_xmit+0x2c8/0x513 [ 348.530014] [<c04c7cfb>] dev_queue_xmit+0xa/0xc [ 348.530014] [<f91bfc7a>] batadv_send_skb_packet+0xd6/0xec [batman_adv] [ 348.530014] [<f91bfdc4>] batadv_send_unicast_skb+0x15/0x4a [batman_adv] [ 348.530014] [<f91b5938>] batadv_dat_send_data+0x27e/0x310 [batman_adv] [ 348.530014] [<f91c30b5>] ? batadv_tt_global_hash_find.isra.11+0x8/0xa [batman_adv] [ 348.530014] [<f91b63f3>] batadv_dat_snoop_outgoing_arp_request+0x208/0x23d [batman_adv] [ 348.530014] [<f91c0cd9>] batadv_interface_tx+0x206/0x385 [batman_adv] [ 348.530014] [<c04c769c>] dev_hard_start_xmit+0x1f8/0x267 [ 348.530014] [<c04c7261>] ? validate_xmit_skb.isra.120.part.121+0x10/0x253 [ 348.530014] [<c04defc6>] sch_direct_xmit+0x8b/0x1b3 [ 348.530014] [<c04c7a9c>] __dev_queue_xmit+0x2c8/0x513 [ 348.530014] [<f80cbd2a>] ? igb_xmit_frame+0x57/0x72 [igb] [ 348.530014] [<c04c7cfb>] dev_queue_xmit+0xa/0xc [ 348.530014] [<f843a326>] br_dev_queue_push_xmit+0xeb/0xfb [bridge] [ 348.530014] [<f843a35f>] br_forward_finish+0x29/0x74 [bridge] [ 348.530014] [<f843a23b>] ? deliver_clone+0x3b/0x3b [bridge] [ 348.530014] [<f843a714>] __br_forward+0x89/0xe7 [bridge] [ 348.530014] [<f843a336>] ? br_dev_queue_push_xmit+0xfb/0xfb [bridge] [ 348.530014] [<f843a234>] deliver_clone+0x34/0x3b [bridge] [ 348.530014] [<f843a68b>] ? br_flood+0x95/0x95 [bridge] [ 348.530014] [<f843a66d>] br_flood+0x77/0x95 [bridge] [ 348.530014] [<f843a809>] br_flood_forward+0x13/0x1a [bridge] [ 348.530014] [<f843a68b>] ? br_flood+0x95/0x95 [bridge] [ 348.530014] [<f843b877>] br_handle_frame_finish+0x392/0x3db [bridge] [ 348.530014] [<c04e9b2b>] ? nf_iterate+0x2b/0x6b [ 348.530014] [<f843baa6>] br_handle_frame+0x1e6/0x240 [bridge] [ 348.530014] [<f843b4e5>] ? br_handle_local_finish+0x6a/0x6a [bridge] [ 348.530014] [<c04c4ba0>] __netif_receive_skb_core+0x43a/0x66b [ 348.530014] [<f843b8c0>] ? br_handle_frame_finish+0x3db/0x3db [bridge] [ 348.530014] [<c023cea4>] ? resched_curr+0x19/0x37 [ 348.530014] [<c0240707>] ? check_preempt_wakeup+0xbf/0xfe [ 348.530014] [<c0255dec>] ? ktime_get_with_offset+0x5c/0xfc [ 348.530014] [<c04c4fc1>] __netif_receive_skb+0x47/0x55 [ 348.530014] [<c04c57ba>] netif_receive_skb_internal+0x40/0x5a [ 348.530014] [<c04c61ef>] napi_gro_receive+0x3a/0x94 [ 348.530014] [<f80ce8d5>] igb_poll+0x6fd/0x9ad [igb] [ 348.530014] [<c0242bd8>] ? swake_up_locked+0x14/0x26 [ 348.530014] [<c04c5d29>] net_rx_action+0xde/0x250 [ 348.530014] [<c022a743>] __do_softirq+0x8a/0x163 [ 348.530014] [<c022a6b9>] ? __hrtimer_tasklet_trampoline+0x19/0x19 [ 348.530014] [<c021100f>] do_softirq_own_stack+0x26/0x2c [ 348.530014] <IRQ> [ 348.530014] [<c022a957>] irq_exit+0x31/0x6f [ 348.530014] [<c0210eb2>] do_IRQ+0x8d/0xa0 [ 348.530014] [<c058152c>] common_interrupt+0x2c/0x40 [ 348.530014] Code: e7 8c 00 66 81 ff 88 00 75 12 85 d2 75 0e b2 c3 b8 83 e9 29 f9 e8 a7 5f f9 c6 eb 74 66 81 e3 8c 005 [ 348.530014] EIP: [<f929245d>] ieee80211_mps_set_frame_flags+0x40/0xaa [mac80211] SS:ESP 0068:f6409a40 [ 348.530014] CR2: 0000000000020040 [ 348.530014] ---[ end trace 48556ac26779732e ]--- [ 348.530014] Kernel panic - not syncing: Fatal exception in interrupt [ 348.530014] Kernel Offset: disabled Cc: stable@vger.kernel.org Reported-by: Fred Veldini <fred.veldini@gmail.com> Tested-by: Fred Veldini <fred.veldini@gmail.com> Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-05-12Merge tag 'mac80211-next-for-davem-2016-05-12' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next Johannes Berg says: ==================== Some more work for 4.7, notably: * completion and fixups of nla_put_64_64bit() work * remove a/b/g/n from wext nickname to avoid confusion with 11ac (which wouldn't even fit fully there due to string length restrictions) along with some other minor changes/cleanups. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-12mac80211: allow software PS-Poll/U-APSD with AP_LINK_PSJohannes Berg
When using RSS, frames might not be processed in the correct order, and thus AP_LINK_PS must be used; most likely with firmware keeping track of the powersave state, this is the case in iwlwifi now. In this case, the driver can use ieee80211_sta_ps_transition() to still have mac80211 manage powersave buffering. However, for U-APSD and PS-Poll this isn't sufficient. If the device can't manage that entirely on its own, mac80211's code should be used. To allow this, export two functions: ieee80211_sta_uapsd_trigger() and ieee80211_sta_pspoll(). Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-05-12mac80211: allow same PN for AMSDU sub-framesSara Sharon
Some hardware (iwlwifi an example) de-aggregate AMSDUs and copy the IV as is to the generated MPDUs, so the same PN appears in multiple packets without being a replay attack. Allow driver to explicitly indicate that a frame is allowed to have the same PN as the previous frame. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-05-12mac80211: remove disconnected APs from BSS tableDavid Spinadel
In some cases, after a sudden AP disappearing and reconnection to another AP in the same ESS, user space gets the old AP in scan results (cached). User space may decide to roam to that old AP which will cause a disconnection and longer recovery. Remove APs that are probably out of range from BSS table. Signed-off-by: David Spinadel <david.spinadel@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-05-04Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts: net/ipv4/ip_gre.c Minor conflicts between tunnel bug fixes in net and ipv6 tunnel cleanups in net-next. Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-27mac80211: fix statistics leak if dev_alloc_name() failsJohannes Berg
In the case that dev_alloc_name() fails, e.g. because the name was given by the user and already exists, we need to clean up properly and free the per-CPU statistics. Fix that. Cc: stable@vger.kernel.org Fixes: 5a490510ba5f ("mac80211: use per-CPU TX/RX statistics") Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-04-12cfg80211: remove enum ieee80211_bandJohannes Berg
This enum is already perfectly aliased to enum nl80211_band, and the only reason for it is that we get IEEE80211_NUM_BANDS out of it. There's no really good reason to not declare the number of bands in nl80211 though, so do that and remove the cfg80211 one. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-04-09Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
2016-04-06mac80211: fix "warning: ‘target_metric’ may be used uninitialized"Jeff Mahoney
This fixes: net/mac80211/mesh_hwmp.c:603:26: warning: ‘target_metric’ may be used uninitialized in this function target_metric is only consumed when reply = true so no bug exists here, but not all versions of gcc realize it. Initialize to 0 to remove the warning. Signed-off-by: Jeff Mahoney <jeffm@suse.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-04-06mac80211: minstrel_ht: set A-MSDU tx limits based on selected max_prob_rateFelix Fietkau
Prevents excessive A-MSDU aggregation at low data rates or bad conditions. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-04-06mac80211: add A-MSDU tx supportFelix Fietkau
Requires software tx queueing and fast-xmit support. For good performance, drivers need frag_list support as well. This avoids the need for copying data of aggregated frames. Running without it is only supported for debugging purposes. To avoid performance and packet size issues, the rate control module or driver needs to limit the maximum A-MSDU size by setting max_rc_amsdu_len in struct ieee80211_sta. Signed-off-by: Felix Fietkau <nbd@openwrt.org> [fix locking issue] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-04-06mac80211: enable collecting station statistics per-CPUJohannes Berg
If the driver advertises the new HW flag USE_RSS, make the station statistics on the fast-rx path per-CPU. This will enable calling the RX in parallel, only hitting locking or shared cachelines when the fast-RX path isn't available. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-04-06mac80211: add fast-rx pathJohannes Berg
The regular RX path has a lot of code, but with a few assumptions on the hardware it's possible to reduce the amount of code significantly. Currently the assumptions on the driver are the following: * hardware/driver reordering buffer (if supporting aggregation) * hardware/driver decryption & PN checking (if using encryption) * hardware/driver did de-duplication * hardware/driver did A-MSDU deaggregation * AP_LINK_PS is used (in AP mode) * no client powersave handling in mac80211 (in client mode) of which some are actually checked per packet: * de-duplication * PN checking * decryption and additionally packets must * not be A-MSDU (have been deaggregated by driver/device) * be data packets * not be fragmented * be unicast * have RFC 1042 header Additionally dynamically we assume: * no encryption or CCMP/GCMP, TKIP/WEP/other not allowed * station must be authorized * 4-addr format not enabled Some data needed for the RX path is cached in a new per-station "fast_rx" structure, so that we only need to look at this and the packet, no other memory when processing packets on the fast RX path. After doing the above per-packet checks, the data path collapses down to a pretty simple conversion function taking advantage of the data cached in the small fast_rx struct. This should speed up the RX processing, and will make it easier to reason about parallelizing RX (for which statistics will need to be per-CPU still.) Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-04-06mac80211: fix RX u64 stats consistency on 32-bit platformsJohannes Berg
On 32-bit platforms, the 64-bit counters we keep need to be protected to be consistently read. Use the u64_stats_sync mechanism to do that. In order to not end up with overly long lines, refactor the tidstats assignments a bit. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-04-06mac80211: fix last RX rate data consistencyJohannes Berg
When storing the last_rate_* values in the RX code, there's nothing to guarantee consistency, so a concurrent reader could see, e.g. last_rate_idx on the new value, but last_rate_flag still on the old, getting completely bogus values in the end. To fix this, I lifted the sta_stats_encode_rate() function from my old rate statistics code, which encodes the entire rate data into a single 16-bit value, avoiding the consistency issue. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-04-06mac80211: add separate last_ack variableJohannes Berg
Instead of touching the rx_stats.last_rx from the status path, introduce and use a status_stats.last_ack variable. This will make rx_stats.last_rx indicate when the last frame was received, making it available for real "last_rx" and statistics gathering; statistics, when done per-CPU, will need to figure out which place was updated last for those items where the "last" value is exposed. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-04-06mac80211: remove rx_stats.last_rx update after sta allocJohannes Berg
There's no need to update rx_stats.last_rx after allocating a station since it's already updated during allocation. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-04-06mac80211: move averaged values out of rx_statsJohannes Berg
Move the averaged values out of rx_stats and into rx_stats_avg, to cleanly split them out. The averaged ones cannot be supported for parallel RX in a per-CPU fashion, while the other values can be collected per CPU and then combined/selected when needed. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-04-06mac80211: move semicolon out of CALL_RXH macroJohannes Berg
Move the semicolon, people typically assume that and once line already put a semicolon behind the "call". Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-04-06mac80211: count MSDUs in A-MSDU properlyJohannes Berg
For the RX MSDU statistics, we need to count the number of MSDUs created and accepted from an A-MSDU. Right now, all frames in any A-MSDUs were completely ignored. Fix this by moving the RX MSDU statistics accounting into the deliver function. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-04-06mac80211: allow passing transmitter station on RXJohannes Berg
Sometimes drivers already looked up, or know out-of-band from their device, which station transmitted a given RX frame. Allow them to pass the station pointer to mac80211 to save the extra lookup. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-04-05mac80211: mesh: flush paths outside of plink lockBob Copeland
Lockdep warned of a lock dependency between the mesh_plink lock and the internal lock for the rhashtable. The problem is that the rhashtable code uses a spin lock with softirqs enabled, while mesh_plink_timer executes a walk (to flush paths on a state change) inside a softirq with the plink lock held. This leads to the following deadlock if the timer fires while rht lock is held on this CPU, and plink lock is held on another CPU: CPU0 CPU1 ---- ---- lock(&(&ht->lock)->rlock); local_irq_disable(); lock(&(&sta->mesh->plink_lock)->rlock); lock(&(&ht->lock)->rlock); <Interrupt> lock(&(&sta->mesh->plink_lock)->rlock); *** DEADLOCK *** Fix by waiting until we drop the plink lock to flush paths. Fixes: d48a1b7cd439 ("mac80211: mesh: convert path table to rhashtable") Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-11 16:34:29 +0000