summaryrefslogtreecommitdiff
path: root/net/mac80211
AgeCommit message (Collapse)Author
2015-11-03mac80211: document sleep requirements for channel context opsChaitanya T K
Channel context driver operations can sleep, so add might_sleep() and document this. Signed-off-by: Chaitanya T K <chaitanya.mgit@gmail.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-11-03mac80211: further improve "no supported rates" warningJohannes Berg
Allow distinguishing the non-station case from the case of a station without rates, by using -1 for the non-station case. This value cannot be reached with a station since that many legacy rates don't exist. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-11-03mac80211: treat bad WMM parameters more gracefullyJohannes Berg
As WMM is required for HT/VHT operation, treat bad WMM parameters more gracefully by falling back to default parameters instead of not using WMM assocation. This makes it possible to still use HT or VHT, although potentially with reduced quality of service due to unintended WMM parameters. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-11-03mac80211: fixup AIFSN instead of disabling WMMEmmanuel Grumbach
Disabling WMM has a huge impact these days. It implies that HT and VHT will be disabled which means that the throughput will be drammatically reduced. Since the AIFSN is a transmission parameter, we can play a bit and fix it up to make it compliant with the 802.11 specification which requires it to be at least 2. Increasing it from 1 to 2 will slightly reduce the likelyhood to get a transmission opportunity compared to other clients that would accept to set AIFSN=1, but at least it will allow HT and VHT which is a huge gain. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-11-03mac80211: make enable_qos parameter to ieee80211_set_wmm_default()Johannes Berg
The function currently determines this value, for use in bss_info.qos, based on the interface type itself. Make it a parameter instead and set it with the same logic for now. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-11-03mac80211: fix crash on mesh local link ID generation with VIFsMatthias Schiffer
llid_in_use needs to be limited to stations of the same VIF, otherwise it will cause a NULL deref as the sta_info of non-mesh-VIFs don't have sta->mesh set. Steps to reproduce: modprobe mac80211_hwsim channels=2 iw phy phy0 interface add ibss0 type ibss iw phy phy0 interface add mesh0 type mp iw phy phy1 interface add ibss1 type ibss iw phy phy1 interface add mesh1 type mp ip link set ibss0 up ip link set mesh0 up ip link set ibss1 up ip link set mesh1 up iw dev ibss0 ibss join foo 2412 iw dev ibss1 ibss join foo 2412 # Ensure that ibss0 and ibss1 are actually associated; I often need to # leave and join the cell on ibss1 a second time. iw dev mesh0 mesh join bar iw dev mesh1 mesh join bar # crash Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-11-03mac80211: TDLS: add proper HT-oper IEArik Nemtsov
When 11n peers performs a TDLS connection on a legacy BSS, the HT operation IE must be specified according to IEEE802.11-2012 section 9.23.3.2. Otherwise HT-protection is compromised and the medium becomes noisy for both the TDLS and the BSS links. Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-11-03mac80211: don't reconfigure sched scan in case of wowlanEliad Peller
Scheduled scan has to be reconfigured only if wowlan wasn't configured, since otherwise it should continue to run (with the 'any' trigger) or be aborted. The current code will end up asking the driver to start a new scheduled scan without stopping the previous one, and leaking some memory (from the previous request.) Fix this by doing the abort/restart under the proper conditions. Signed-off-by: Eliad Peller <eliadx.peller@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-11-03mac80211: call drv_stop only if driver is startedEliad Peller
If drv_start() fails during hw_restart, all the running interfaces are being closed/stopped, which results in drv_stop() being called, although the driver was never started successfully. This might cause drivers to perform operations on uninitialized memory (as they assume it was initialized on drv_start) Consider the local->started flag, and call the driver's stop() op only if drv_start() succeeded before. Move drv_start() and drv_stop() to driver-ops.c, as they are no longer simple wrappers. Signed-off-by: Eliad Peller <eliadx.peller@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-11-03mac80211: Remove WARN_ON_ONCE in ieee80211_recalc_smpsAndrei Otcheretianski
The recalc_smps work can run after the station disassociates. At this stage we already released the channel, but the work will be cancelled only when the interface stops. In this scenario we can hit the warning in ieee80211_recalc_smps, so just remove it. Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-11-03mac80211: use freezable workqueue for restart workEliad Peller
Requesting hw restart during suspend might result in the restart work being executed after mac80211 and the hw are suspended. Solve the race by simply scheduling the restart work on a freezable workqueue. Note that there can be some cases of reconfiguration on resume (besides the hardware restart): * wowlan is not configured - All the interfaces removed were removed on suspend, and drv_stop() was called. At this point the driver shouldn't expect for hw_restart anyway, so we can simply cancel it (on resume). * wowlan is configured, drv_resume() == 1 There is no definitive expected behavior in this case, as each driver might have different expectations (e.g. setting some flags on suspend/restart vs. not handling spurious recovery). For now, simply let the hw_restart work run again after resume, and hope the driver will handle it well (or at least initiate another hw restart). Signed-off-by: Eliad Peller <eliadx.peller@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-11-03mac80211: Fix local deauth while associatingAndrei Otcheretianski
Local request to deauthenticate wasn't handled while associating, thus the association could continue even when the user space required to disconnect. Cc: stable@vger.kernel.org Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-11-03mac80211: allow null chandef in tracingArik Nemtsov
In TDLS channel-switch operations the chandef can sometimes be NULL. Avoid an oops in the trace code for these cases and just print a chandef full of zeros. Cc: stable@vger.kernel.org Fixes: a7a6bdd0670fe ("mac80211: introduce TDLS channel switch ops") Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-11-03mac80211: fix divide by zero when NOA updateJanusz.Dziedzic@tieto.com
In case of one shot NOA the interval can be 0, catch that instead of potentially (depending on the driver) crashing like this: divide error: 0000 [#1] SMP [...] Call Trace: <IRQ> [<ffffffffc08e891c>] ieee80211_extend_absent_time+0x6c/0xb0 [mac80211] [<ffffffffc08e8a17>] ieee80211_update_p2p_noa+0xb7/0xe0 [mac80211] [<ffffffffc069cc30>] ath9k_p2p_ps_timer+0x170/0x190 [ath9k] [<ffffffffc070adf8>] ath_gen_timer_isr+0xc8/0xf0 [ath9k_hw] [<ffffffffc0691156>] ath9k_tasklet+0x296/0x2f0 [ath9k] [<ffffffff8107ad65>] tasklet_action+0xe5/0xf0 [...] Cc: stable@vger.kernel.org [3.16+, due to d463af4a1c34 using it] Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-10-22Merge tag 'mac80211-next-for-davem-2015-10-21' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next Johannes Berg says: ==================== Here's another set of patches for the current cycle: * I merged net-next back to avoid a conflict with the * cfg80211 scheduled scan API extensions * preparations for better scan result timestamping * regulatory cleanups * mac80211 statistics cleanups * a few other small cleanups and fixes ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-21mac80211: move station statistics into sub-structsJohannes Berg
Group station statistics by where they're (mostly) updated (TX, RX and TX-status) and group them into sub-structs of the struct sta_info. Also rename the variables since the grouping now makes it obvious where they belong. This makes it easier to identify where the statistics are updated in the code, and thus easier to think about them. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-10-21mac80211: move beacon_loss_count into ifmgdJohannes Berg
There's little point in keeping (and even sending to userspace) the beacon_loss_count value per station, since it can only apply to the AP on a managed-mode connection. Move the value to ifmgd, advertise it only in managed mode, and remove it from ethtool as it's available through better interfaces. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-10-21mac80211: remove sta->last_ack_signalJohannes Berg
This file only feeds a debugfs file that isn't very useful, so remove it. If necessary, we can add other ways to get this information, for example in the NL80211_CMD_PROBE_CLIENT response. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-10-20Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts: drivers/net/usb/asix_common.c net/ipv4/inet_connection_sock.c net/switchdev/switchdev.c In the inet_connection_sock.c case the request socket hashing scheme is completely different in net-next. The other two conflicts were overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-14mac80211: remove event.cJohannes Berg
That file contains just a single function, which itself is just a single statement to call a different function. Remove it. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-10-14mac80211: remove cfg.hJohannes Berg
The file contains just a single declaration that can easily move to another file - remove it. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-10-14mac80211: move sta_set_rate_info_rx() and make it staticJohannes Berg
There's only a single caller of this function, so it can be moved to the same file and made static. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-10-14mac80211: clean up ieee80211_rx_h_check_dup codeJohannes Berg
Reduce indentation a bit to make the condition more readable. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-10-14mac80211: remove PM-QoS listenerJohannes Berg
As this API has never really seen any use and most drivers don't ever use the value derived from it, remove it. Change the only driver using it (rt2x00) to simply use the DTIM period instead of the "max sleep" time. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-10-13mac80211: use new cfg80211_inform_bss_frame_data() APIJohannes Berg
The new API is more easily extensible with a metadata struct passed to it, use it in mac80211. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-10-13mac80211: Do not restart scheduled scan if multiple scan plans are setAvraham Stern
If multiple scan plans were set for scheduled scan, do not restart scheduled scan on reconfig because it is possible that some scan plans were already completed and there is no need to run them all over again. Instead, notify userspace that scheduled scan stopped so it can configure new scan plans for scheduled scan. Signed-off-by: Avraham Stern <avraham.stern@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-10-13mac80211: Fix hwflags debugfs file formatMohammed Shafi Shajakhan
Commit 30686bf7f5b3 ("mac80211: convert HW flags to unsigned long bitmap") accidentally removed the newline delimiter from the hwflags debugfs file. Fix this by adding back the newline between the HW flags. Cc: stable@vger.kernel.org [4.2] Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qti.qualcomm.com> [fix commit log] Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-10-13Revert "mac80211: remove exposing 'mfp' to drivers"Tamizh chelvam
This reverts commit 5c48f1201744233d4f235c7dd916d5196ed20716. Some device drivers (ath10k) offload part of aggregation including AddBA/DelBA negotiations to firmware. In such scenario, the PMF configuration of the station needs to be provided to driver to enable encryption of AddBA/DelBA action frames. Signed-off-by: Tamizh chelvam <c_traja@qti.qualcomm.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-10-13Merge remote-tracking branch 'net-next/master' into mac80211-nextJohannes Berg
Merge net-next to get some driver changes that patches depend on (in order to avoid conflicts). Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-10-08mac80211: add missing struct ieee80211_txq tid field initializationFelix Fietkau
Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-10-07Merge tag 'mac80211-next-for-davem-2015-10-05' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next Johannes Berg says: ==================== For the current cycle, we have the following right now: * many internal fixes, API improvements, cleanups, etc. * full AP client state tracking in cfg80211/mac80211 from Ayala * VHT support (in mac80211) for mesh * some A-MSDU in A-MPDU support from Emmanuel * show current TX power to userspace (from Rafał) * support for netlink dump in vendor commands (myself) ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-05mac80211: make ieee80211_new_mesh_header return unsignedAndrzej Hajda
The function returns always non-negative values. The problem has been detected using proposed semantic patch scripts/coccinelle/tests/assign_signed_to_unsigned.cocci [1]. [1]: http://permalink.gmane.org/gmane.linux.kernel/2046107 Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-10-05mac80211: use ktime_get_secondsArnd Bergmann
The mac80211 code uses ktime_get_ts to measure the connected time. As this uses monotonic time, it is y2038 safe on 32-bit systems, but we still want to deprecate the use of 'timespec' because most other users are broken. This changes the code to use ktime_get_seconds() instead, which avoids the timespec structure and is slightly more efficient. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Johannes Berg <johannes@sipsolutions.net> Cc: linux-wireless@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-29mac80211: use bool argument to ieee80211_send_nullfuncJohannes Berg
Instead of int with 0/1, use bool with false/true for the powersave argument to ieee80211_send_nullfunc(). Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-09-29mac80211: reduce indentation by inlining a checkJohannes Berg
Instead of nesting two if statements, inline the second check into the first if statement and to indentation. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-09-29mac80211: fix tx sequence number assignment with software queue + fast-xmitFelix Fietkau
When using software queueing, tx sequence number assignment happens at ieee80211_tx_dequeue time, so the fast-xmit codepath must not do that. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-09-29mac80211: advertise support for full station state in AP modeAyala Beker
This enables adding stations in unauthenticated mode, just after receiving the first authentication frame; which in turn allows sending a negative authentication reply if the station cannot be added. In addition init rate control for unassociated station only when it becomes associated, prior to that low rates will be used. Signed-off-by: Ayala Beker <ayala.beker@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-09-29mac80211: allow writing TX PN in debugfsJohannes Berg
For certain tests, for example replay detection, it can be useful to be able to influence/set the PN used in outgoing packets. Make it possible to change the TX PN in debugfs. For now, this doesn't support TKIP since I haven't needed it, but there's no reason it couldn't be added if necessary. Note that this must be used very carefully: it could, for example, be used to make "valid replays" where the PN reuse happens on a different TID. This couldn't be done by an attacker since the TID is protected as part of the AAD. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-09-29mac80211: Deinline drv_get/set/reset_tsf()Denys Vlasenko
With this .config: http://busybox.net/~vda/kernel_config_ALLYES_Os, after deinlining these functions have sizes and callsite counts as follows: drv_get_tsf: 634 bytes, 6 calls drv_set_tsf: 626 bytes, 2 calls drv_reset_tsf: 617 bytes, 2 calls Total size reduction is about 4.2 kbytes. Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com> CC: Johannes Berg <johannes.berg@intel.com> CC: John Linville <linville@tuxdriver.com> CC: Michal Kazior <michal.kazior@tieto.com> CC: linux-wireless@vger.kernel.org CC: linux-kernel@vger.kernel.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-09-29mac80211: Deinline drv_ampdu_action()Denys Vlasenko
With this .config: http://busybox.net/~vda/kernel_config_ALLYES_Os, after deinlining the function size is 755 bytes and there are 6 callsites. Total size reduction is about 3.3 kbytes. Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com> CC: Johannes Berg <johannes.berg@intel.com> CC: John Linville <linville@tuxdriver.com> CC: Michal Kazior <michal.kazior@tieto.com> CC: linux-wireless@vger.kernel.org CC: linux-kernel@vger.kernel.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-09-29mac80211: Deinline drv_switch_vif_chanctx()Denys Vlasenko
With this .config: http://busybox.net/~vda/kernel_config_ALLYES_Os, after deinlining the function size is 821 bytes and there are 2 callsites, reducing code size by about 800 bytes. Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com> CC: Johannes Berg <johannes.berg@intel.com> CC: John Linville <linville@tuxdriver.com> CC: Michal Kazior <michal.kazior@tieto.com> CC: linux-wireless@vger.kernel.org CC: linux-kernel@vger.kernel.org [adjust code-style a bit] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-09-29mac80211: improve __rate_control_send_low warningJohannes Berg
If there are no supported rates in the rate mask with the required flags, we warn, but it's not clear which part causes the warning. Add the relevant data to the warning to understand why it happens. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-09-29mac80211: minstrel[_ht]: remove non-ascii debugfs charactersJohannes Berg
Replace the average symbol by "avg" to avoid being warned about the non-ASCII symbol all the time, line up the columns properly. (I changed my mind - the warnings are getting annoying) Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-09-29mac80211: don't tear down aggregation on suspend in case of wowlan->anyEliad Peller
In case of "any" wowlan trigger, there is no reason to tear down aggregations, as we want the device to continue working normally. Similarly, there's no reason to tear down aggregations on resume, as they should have been torn down on suspend if needed. However, since the reconfiguration flow is shared with HW restart, tear down aggregations on reconfiguration when we are not resuming. To keep things working after non-wowlan suspend, keep clearing the WLAN_STA_BLOCK_BA flag. Signed-off-by: Eliad Peller <eliadx.peller@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-09-29mac80211: Deinline drv_add/remove/change_interface()Denys Vlasenko
With this .config: http://busybox.net/~vda/kernel_config_ALLYES_Os, after deinlining these functions have sizes and callsite counts as follows: drv_add_interface: 638 bytes, 5 calls drv_remove_interface: 611 bytes, 6 calls drv_change_interface: 658 bytes, 1 call Total size reduction is about 9 kbytes. Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com> CC: John Linville <linville@tuxdriver.com> CC: Michal Kazior <michal.kazior@tieto.com> CC: Johannes Berg <johannes.berg@intel.com> CC: linux-wireless@vger.kernel.org CC: linux-kernel@vger.kernel.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-09-29mac80211: Deinline drv_sta_rc_update()Denys Vlasenko
With this .config: http://busybox.net/~vda/kernel_config_ALLYES_Os, after deinlining the function size is 706 bytes and there are 2 callsites, reducing code size by about 700 bytes. Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com> CC: John Linville <linville@tuxdriver.com> CC: Michal Kazior <michal.kazior@tieto.com> CC: Johannes Berg <johannes.berg@intel.com> CC: linux-wireless@vger.kernel.org CC: linux-kernel@vger.kernel.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-09-29mac80211: Deinline drv_conf_tx()Denys Vlasenko
With this .config: http://busybox.net/~vda/kernel_config_ALLYES_Os, after deinlining the function size is 785 bytes and there are 7 callsites. Total size reduction is about 3.5 kbytes. Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com> CC: John Linville <linville@tuxdriver.com> CC: Michal Kazior <michal.kazior@tieto.com> CC: Johannes Berg <johannes.berg@intel.com> CC: linux-wireless@vger.kernel.org CC: linux-kernel@vger.kernel.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-09-29mac80211: Copy tx'ed beacons to monitor modeHelmut Schaa
When debugging wireless powersave issues on the AP side it's quite helpful to see our own beacons that are transmitted by the hardware/driver. However, this is not that easy since beacons don't pass through the regular TX queues. Preferably drivers would call ieee80211_tx_status also for tx'ed beacons but that's not always possible. Hence, just send a copy of each beacon generated by ieee80211_beacon_get_tim to monitor devices when they are getting fetched by the driver. Also add a HW flag IEEE80211_HW_BEACON_TX_STATUS that can be used by drivers to indicate that they report TX status for beacons. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> (with a fix from Christian Lamparted rolled in) Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-09-24mac80211: fix handling of PS filtering with fast-xmitFelix Fietkau
Fixes dropped packets in the tx path in case a non-PS station triggers the tx filter. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-09-22mac80211: reset CQM history upon reconfigurationSara Sharon
The current behavior of notifying CQM events is inconsistent: Upon first configuration there is a cqm event with the current status according to threshold configured, regardless of signal stability. When there is reconfiguration no event is sent unless there is a significant change to the signal level according to the new configuration. Since the current reconfiguration behavior might cause missing CQM events in case the current signal did not change but is on the other side of the new threshold, fix that by resetting the stored signal level upon reconfiguration. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>