summaryrefslogtreecommitdiff
path: root/net/mac80211/mesh.h
AgeCommit message (Collapse)Author
2014-10-09mac80211: implement cfg80211_ops to query mesh proxy path tableHenning Rogge
Implement get_mpp and dump_mpp cfg80211_ops to export the content of the 802.11s mesh proxy path table to userspace. Signed-off-by: Henning Rogge <henning.rogge@fkie.fraunhofer.de> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-11-25mac80211: use put_unaligned_le in mesh when necessaryChun-Yeow Yeoh
Use put_unaligned_le16 and put_unaligned_le32 for mesh_path_error_tx and mesh_path_sel_frame_tx. Signed-off-by: Chun-Yeow Yeoh <yeohchunyeow@gmail.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-11-25mac80211: remove unused mesh_mgmt_ies_add() prototypeBob Copeland
Said function was removed some time ago. Signed-off-by: Bob Copeland <bob@cozybit.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-06-18mac80211: update mesh beacon on workqueueThomas Pedersen
Instead of updating the mesh beacon immediately when requested (which would require the sdata_lock()), defer it to the mac80211 workqueue. Fixes yet another deadlock on calling sta_info_flush() with the sdata_lock() held from ieee80211_stop_mesh(). We could just drop the sdata_lock() around the mesh_sta_cleanup() call, but this path is also taken from several non-locked error paths. Signed-off-by: Thomas Pedersen <thomas@cozybit.com> [fix comment position] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-06-11mac80211: expire mesh peers based on mesh configurationColleen Twitty
The time it takes to see the peer link expire may differ by a minute since sta_expire() is run once a minute as a mesh housekeeping task. Signed-off-by: Colleen Twitty <colleen@cozybit.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-06-03mac80211: set mesh formation field properlyJacob Minshall
Cap max peerings at 63 in accordance with IEEE-2012 8.4.2.100.7. Triggers a beacon regeneration every time the number of peerings changes. Previously this would only happen if the "accepting peerings" bit changed. Signed-off-by: Jacob Minshall <jacob@cozybit.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-04-08mac80211: return new mpath from mesh_path_add()Bob Copeland
Most times that mesh_path_add() is called, it is followed by a lookup to get the just-added mpath. We can instead just return the new mpath in the case that we allocated one (or the existing one if already there), so do that. Also, reorder the code in mesh_path_add a bit so that we don't need to allocate in the pre-existing case. Signed-off-by: Bob Copeland <bob@cozybit.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-03-06mac80211: cleanup suspend/resume on mesh modeStanislaw Gruszka
Remove not used any longer suspend/resume code. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-15mac80211: clean up mesh codeJohannes Berg
There's various code with strange indentation, questionable loop and locking constructs, etc. The bigger change is moving the "sdata" argument to the first argument of all functions, like all other mac80211 functions that have one. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-15mac80211: cache mesh beaconThomas Pedersen
Previously, the entire mesh beacon would be generated each time the beacon timer fired. Instead generate a beacon head and tail (so the TIM can easily be inserted when mesh power save is on) when starting a mesh or the MBSS parameters change. Also add a mutex for protecting beacon updates and preventing leaks. Signed-off-by: Thomas Pedersen <thomas@cozybit.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-15mac80211: constify IE parsingJohannes Berg
Make all the parsed IE pointers const, and propagate the change to all the users etc. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-15mac80211: consolidate MBSS change notificationThomas Pedersen
A few mesh utility functions will call ieee80211_bss_info_change_notify(), and then the caller might notify the driver of the same change again. Avoid this redundancy by propagating the BSS changes and generally calling bss_info_change_notify() once per change. Signed-off-by: Thomas Pedersen <thomas@cozybit.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-11mac80211: fix mesh sta teardownThomas Pedersen
The patch "mac80211: clean up mesh sta allocation warning" moved some mesh initialization into a path which is only called when the kernel handles peering. This causes a hang when mac80211 tries to clean up a userspace-allocated station entry and delete a timer which has never been initialized. To avoid this, only do any mesh sta peering teardown if the kernel is actually handling it. The same is true when quiescing before suspend. Signed-off-by: Thomas Pedersen <thomas@cozybit.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-04mac80211: mesh power save basicsMarco Porsch
Add routines to - maintain a PS mode for each peer and a non-peer PS mode - indicate own PS mode in transmitted frames - track neighbor STAs power modes - buffer frames when neighbors are in PS mode - add TIM and Awake Window IE to beacons - release frames in Mesh Peer Service Periods Add local_pm to sta_info to represent the link-specific power mode at this station towards the remote station. When a peer link is established, use the default power mode stored in mesh config. Update the PS status if the peering status of a neighbor changes. Maintain a mesh power mode for non-peer mesh STAs. Set the non-peer power mode to active mode during peering. Authenticated mesh peering is currently not working when either node is configured to be in power save mode. Indicate the current power mode in transmitted frames. Use QoS Nulls to indicate mesh power mode transitions. For performance reasons, calls to the function setting the frame flags are placed in HWMP routing routines, as there the STA pointer is already available. Add peer_pm to sta_info to represent the peer's link-specific power mode towards the local station. Add nonpeer_pm to represent the peer's power mode towards all non-peer stations. Track power modes based on received frames. Add the ps_data structure to ieee80211_if_mesh (for TIM map, PS neighbor counter and group-addressed frame buffer). Set WLAN_STA_PS flag for STA in PS mode to use the unicast frame buffering routines in the tx path. Update num_sta_ps to buffer and release group-addressed frames after DTIM beacons. Announce the awake window duration in beacons if in light or deep sleep mode towards any peer or non-peer. Create a TIM IE similarly to AP mode and add it to mesh beacons. Parse received Awake Window IEs and check TIM IEs for buffered frames. Release frames towards peers in mesh Peer Service Periods. Use the corresponding trigger frames and monitor the MPSP status. Append a QoS Null as trigger frame if neccessary to properly end the MPSP. Currently, in HT channels MPSPs behave imperfectly and show large delay spikes and frame losses. Signed-off-by: Marco Porsch <marco@cozybit.com> Signed-off-by: Ivan Bezyazychnyy <ivan.bezyazychnyy@gmail.com> Signed-off-by: Mike Krinkin <krinkin.m.u@gmail.com> Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-01-16{cfg,nl,mac}80211: set beacon interval and DTIM period on mesh joinMarco Porsch
Move the default mesh beacon interval and DTIM period to cfg80211 and make them accessible to nl80211. This enables setting both values when joining an MBSS. Previously the DTIM parameter was not set by mac80211 so the driver's default value was used. Signed-off-by: Marco Porsch <marco@cozybit.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-01-16mac80211: update mesh peer link counter during userspace peeringMarco Porsch
The established peer link count is indicated in mesh beacons and used for other internal tasks. Previously it was not updated when authenticated peering is performed in userspace. Signed-off-by: Marco Porsch <marco@cozybit.com> Acked-by: Thomas Pedersen <thomas@cozybit.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-01-03mac80211: RMC buckets are just list headsThomas Pedersen
The array of rmc_entrys is redundant since only the list_head is used. Make this an array of list_heads instead and save ~6k per vif at runtime :D Signed-off-by: Thomas Pedersen <thomas@cozybit.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-26mac80211: move Mesh Capability field definition to ieee80211.hMarco Porsch
Signed-off-by: Marco Porsch <marco.porsch@etit.tu-chemnitz.de> [prefix with IEEE80211_] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-10-18mac80211: remove unimplemented mesh vendor syncJohannes Berg
There's no vendor-specific mesh sync implemented and there don't need to be dummy handlers that only print messages, so remove that code. While at it, also constify the mesh sync ops. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-10-17mac80211: move out the non-statistics variable estab_plinks from mesh_statAshok Nagarajan
estab_plinks is not a statistics member. Hence move estab_plinks from struct mesh_stat to struct ieee80211_if_mesh Signed-off-by: Ashok Nagarajan <ashok@cozybit.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-08-21Merge branch 'for-john' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next Conflicts: drivers/net/wireless/mac80211_hwsim.c
2012-08-20mac80211: clean up mpath_move_to_queue()Thomas Pedersen
Use skb_queue_walk_safe instead, and fix a few issues: - didn't free old skbs on moving - didn't react to failed skb alloc - needlessly held a local pointer to the destination frame queue - didn't check destination queue length before adding skb Signed-off-by: Thomas Pedersen <thomas@cozybit.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-08-13mac80211: fix unnecessary beacon update after peering status changeMarco Porsch
ieee80211_bss_info_change_notify is called everytime a peer link is established or closed, because the accepting_plinks flag in the meshconf IE *might* have changed. With this patch the corresponding functions return the BSS_CHANGED_BEACON flag when a beacon update is necessary. Also it makes mesh_accept_plinks_update the common place to update the accepting_plinks flag. mesh_accept_plinks_update is called upon plink change and also periodically from ieee80211_mesh_housekeeping. Thus, it also picks up changes of local->num_sta. Signed-off-by: Marco Porsch <marco.porsch@etit.tu-chemnitz.de> Acked-by: Thomas Pedersen <thomas@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-06-18{nl,cfg,mac}80211: implement dot11MeshHWMPconfirmationIntervalChun-Yeow Yeoh
As defined in section 13.10.9.3 Case D (802.11-2012), this control variable is used to limit the mesh STA to send only one PREQ to a root mesh STA within this interval of time (in TUs). The default value for this variable is set to 2000 TUs. However, for current implementation, the maximum configurable of dot11MeshHWMPconfirmationInterval is restricted by dot11MeshHWMPactivePathTimeout. Signed-off-by: Chun-Yeow Yeoh <yeohchunyeow@gmail.com> [line-break commit log] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-06-09mac80211: Rename stainfo variable for the more common staJavier Cardona
Signed-off-by: Javier Cardona <javier@cozybit.com> Reviewed-by: Jason Abele <jason@cozybit.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-04-24mac80211: Adds clean sdata helperAndrei Emeltchenko
Adds hepler to clean sdata ieee80211_clean_sdata similar way as ieee80211_setup_sdata is implemented. The function will be used by other interfaces later. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-23mac80211: refactor mesh peer rate handlingThomas Pedersen
To avoid passing supp_rates and basic_rates around all the time, just derive these when needed in mesh_matches_local() and mesh_peer_init(). Signed-off-by: Thomas Pedersen <thomas@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-11mac80211: Check basic rates when peeringAshok Nagarajan
Section 13.2.3 of IEEE 80211s standard requires BSSBasicRateSet of mesh nodes to be identical to establish peer link. Signed-off-by: Ashok Nagarajan <ashok@cozybit.com> Signed-off-by: Thomas Pedersen <thomas@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-10mac80211: Implement mesh synchronization frameworkJavier Cardona
This patch adds MBSS extensible synchronization framework (Sec. 13.13.2 of IEEE Std. 802.11-2012). The framework is implemented via an ops table which defines the following functions: rx_bcn_presp() - this is called every time a mesh beacon is received. adjust_tbtt() - this is called immediately before a beacon is about to be transmitted. The default neighbor offset synchronization defined in the standard is implemented. We also provide template functions for vendor specific methods. When neighbor offset synchronization is active (which is the default) mesh neighbors in the same MBSS will track timing offsets to each other and compensate clock drift. In our tests we observed that this mesh synchronization implementation successfully corrected drifts between stations of ~2PPM while introducing a jitter of ~20us. It is also possible to test this framework on mac80211_hwsim simulated phys to see how it behaves under different topologies, over poor links, etc. Signed-off-by: Marco Porsch <marco.porsch@s2005.tu-chemnitz.de> Signed-off-by: Pavel Zubarev <pavel.zubarev@gmail.com> Signed-off-by: Javier Cardona <javier@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-09mac80211: fix the RANN propagation issuesChun-Yeow Yeoh
This patch is intended to solve the follwing issues in RANN propagation: [1] The interval in propagated RANN should be based on the interval of received RANN. [2] The aggregated path metric for propagated RANN is as received plus own link metric towards the transmitting mesh STA (not root mesh STA). [3] The comparison of path metric for RANN with same sequence number should be done before deciding whether to propagate or not. Signed-off-by: Chun-Yeow Yeoh <yeohchunyeow@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-09wireless: rename ht_info to ht_operationJohannes Berg
Since some of the HT code pre-dates 802.11n-2009 some names are wrong. The one that bothers me most is that "HT operation" is called "HT information" in our code and that causes confusion. Rename "HT information" to "HT operation" and also the control_chan field to primary_chan to match the name used in the spec. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Acked-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-05mac80211: Fix the generation of PREQs in proactive RANN mechanism of HWMPChun-Yeow Yeoh
According to Section Y.7.4 Actions on receipt of proactive RANN, an individually addressed PREQ should be generated towards the neighbor peer mesh STA indicated in the RANN Sender Address field in the forwarding information. Signed-off-by: Chun-Yeow Yeoh <yeohchunyeow@gmail.com> Signed-off-by: Javier Cardona <javier@cozybit.com> Signed-off-by: Thomas Pedersen <thomas@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-27mac80211: clean up asm/unaligned.h inclusionJohannes Berg
Some files implicitly get this via mesh.h which itself doesn't need it, so move the inclusion into the right files. Some other files don't need it at all but include it, so remove it from there. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-11-28mac80211: don't initiate path discovery when forwarding frame with unknown DAThomas Pedersen
We used to initiate a path discovery when receiving a frame for which there is no forwarding information. To cut down on PREQ spam, just send a (gated) PERR in response. Also separate path discovery logic from nexthop querying. This patch means we no longer queue frames when forwarding, so kill the PERR TX stuff in discard_frame(). Signed-off-by: Thomas Pedersen <thomas@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-11-09mac80211: Avoid filling up mesh preq queue with redundant requestsJavier Cardona
Don't accept redundant PREQs for a given destination. This fixes a problem under high load: kernel: [20386.250913] mesh_queue_preq: 235 callbacks suppressed kernel: [20386.253335] Mesh HWMP (mesh0): PREQ node queue full kernel: [20386.253352] Mesh HWMP (mesh0): PREQ node queue full (...) The 802.11s protocol has a provision to limit the rate of path requests (PREQs) are transmitted (dot11MeshHWMPpreqMinInterval) but there was no limit on the rate at which PREQs were being queued up. There is a valid reason for queuing PREQs: this way we can even out PREQ bursts. But queueing multiple PREQs for the same destination is useless. Reported-by: Pedro Larbig <pedro.larbig@carhs.de> Signed-off-by: Javier Cardona <javier@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-11-08mac80211: add HT IEs to mesh framesThomas Pedersen
Signed-off-by: Thomas Pedersen <thomas@cozybit.com> Signed-off-by: Ashok Nagarajan <anagar6@uic.edu> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-30mac80211: standardize adding supported rates IEsArik Nemtsov
Relocate the mesh implementation of adding the (extended) supported rates IE to util.c, anticipating its use by other parts of mac80211. Signed-off-by: Arik Nemtsov <arik@wizery.com> Cc: Kalyan C Gaddam <chakkal@iit.edu> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-13mac80211: Improve mpath state lockingJavier Cardona
No need to take the mpath state lock when an mpath is removed. Also, no need checking the lock when reading mpath flags. Signed-off-by: Javier Cardona <javier@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-13mac80211: Remove mesh paths when an interface is removedJavier Cardona
When an interface is removed, the mesh paths associated with it should also be removed. This fixes a bug we observed when reloading a device driver module without reloading mac80211s. Signed-off-by: Javier Cardona <javier@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-24{nl,cfg,mac}80211: let userspace set RANN intervalJavier Cardona
Allow userspace to set Root Announcement Interval for our mesh interface. Also, RANN interval is now in proper units of TUs. Signed-off-by: Javier Cardona <javier@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-24mac80211: mesh gate implementationJavier Cardona
In this implementation, a mesh gate is a root node with a certain bit set in its RANN flags. The mpath to this root node is marked as a path to a gate, and added to our list of known gates for this if_mesh. Once a path discovery process fails, we forward the unresolved frames to a known gate. Thanks to Luis Rodriguez for refactoring and bug fix help. Signed-off-by: Javier Cardona <javier@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-22mac80211: update mesh path selection frame formatThomas Pedersen
Make mesh path selection frames Mesh Action category, remove outdated Mesh Path Selection category and defines, use updated reason codes, add mesh_action_is_path_sel for readability, and update/correct path selection IEs. Signed-off-by: Thomas Pedersen <thomas@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-22mac80211: fix mesh beacon formatThomas Pedersen
Correct ordering of IEs in the mesh beacon while removing unneeded IEs from mesh peering frames. Set privacy bit in capability info if security is enabled. Add utility functions to aid in construction of IEs and reduce code duplication. Signed-off-by: Thomas Pedersen <thomas@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-16mac80211: annotate and fix RCU in mesh codeJohannes Berg
This adds proper RCU annotations to the mesh path table code, and fixes a number of bugs in the code that I found while checking the sparse warnings I got as a result of the annotations. Some things like the changes in mesh_path_add() or mesh_pathtbl_init() only serve to shut up sparse, but other changes like the changes surrounding the for_each_mesh_entry() macro fix real RCU bugs in the code. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-16mac80211: fix and simplify mesh lockingJohannes Berg
The locking in mesh_{mpath,mpp}_table_grow not only has an rcu_read_unlock() missing, it's also racy (though really only technically since it's invoked from a single function only) since it obtains the new size of the table without any locking, so two invocations of the function could attempt the same resize. Additionally, it uses synchronize_rcu() which is rather expensive and can be avoided trivially here. Modify the functions to only use the table lock and use call_rcu() instead of synchronize_rcu(). Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-16mac80211: sparse RCU annotationsJohannes Berg
This adds sparse RCU annotations to most of mac80211, only the mesh code remains to be done. Due the the previous patches, the annotations are pretty simple. The only thing that this actually changes is removing the RCU usage of key->sta in debugfs since this pointer isn't actually an RCU-managed pointer (it only has a single assignment done before the key even goes live). As that is otherwise harmless, I decided to make it part of this patch. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-12mac80211: mesh: move some code to make it staticJohannes Berg
There's no need to have table functions in one file and all users in another, move the functions to the right file and make them static. Also move a static variable to the beginning of the file to make it easier to find. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-12mac80211: send notification on new peer candidate for our secure meshJavier Cardona
Also, advertise support for mesh authentication. Signed-off-by: Javier Cardona <javier@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-12-20mac80211: Remove unused third address from mesh address extension header.Javier Cardona
The Mesh Control header only includes 0, 1 or 2 addresses. If there is one address, it should be interpreted as Address 4. If there are 2, they are interpreted as Addresses 5 and 6 (Address 4 being the 4th address in the 802.11 header). The address extension used to hold up to 3 addresses instead of the current 2. I'm not sure which draft version changed this, but it is very unlikely that it will change again given the state of the approval process of this draft. See section 7.1.3.6.3 in current draft (8.0). Also, note that the extra address that I'm removing was not being used, so this change has no effect on over-the-air frame formats. But I thought I better remove it before someone does start using it. Signed-off-by: Javier Cardona <javier@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-12-20mac80211: Send mesh non-HWMP path selection frames to userspaceJavier Cardona
Let path selection frames for protocols other than HWMP be sent to userspace via NL80211_CMD_REGISTER_FRAME. Also allow userspace to send and receive mesh path selection frames. Signed-off-by: Javier Cardona <javier@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-22 09:04:36 +0000