summaryrefslogtreecommitdiff
path: root/net/mac80211/mesh.c
AgeCommit message (Collapse)Author
2018-03-23mac80211: notify driver for change in multicast ratesPradeep Kumar Chitrapu
With drivers implementing rate control in driver or firmware rate_control_send_low() may not get called, and thus the driver needs to know about changes in the multicast rate. Add and use a new BSS change flag for this. Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org> [rewrite commit message] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-02-22Merge tag 'mac80211-for-davem-2018-02-22' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211 Johannes Berg says: ==================== Various fixes across the tree, the shortlog basically says it all: cfg80211: fix cfg80211_beacon_dup -> old bug in this code cfg80211: clear wep keys after disconnection -> certain ways of disconnecting left the keys mac80211: round IEEE80211_TX_STATUS_HEADROOM up to multiple of 4 -> alignment issues with using 14 bytes mac80211: Do not disconnect on invalid operating class -> if the AP has a bogus operating class, let it be mac80211: Fix sending ADDBA response for an ongoing session -> don't send the same frame twice cfg80211: use only 1Mbps for basic rates in mesh -> interop issue with old versions of our code mac80211_hwsim: don't use WQ_MEM_RECLAIM -> it causes splats because it flushes work on a non-reclaim WQ regulatory: add NUL to request alpha2 -> nla_put_string() issue from Kees mac80211: mesh: fix wrong mesh TTL offset calculation -> protocol issue mac80211: fix a possible leak of station stats -> error path might leak memory mac80211: fix calling sleeping function in atomic context -> percpu allocations need to be made with gfp flags ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-31mac80211: mesh: fix wrong mesh TTL offset calculationPeter Oh
mesh TTL offset in Mesh Channel Switch Parameters element depends on not only Secondary Channel Offset element, but also affected by HT Control field and Wide Bandwidth Channel Switch element. So use element structure to manipulate mesh channel swich param IE after removing its constant attribution to correct the miscalculation. Signed-off-by: Peter Oh <peter.oh@bowerswilkins.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-12-11mac80211: mark expected switch fall-throughsGustavo A. R. Silva
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Notice that in some cases I replaced "fall through on else" and "otherwise fall through" comments with just a "fall through" comment, which is what GCC is expecting to find. Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-11-20mac80211: Convert timers to use timer_setup()Kees Cook
In preparation for unconditionally passing the struct timer_list pointer to all timer callbacks, switch to using the new timer_setup() and from_timer() to pass the timer pointer explicitly. Cc: Johannes Berg <johannes@sipsolutions.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: linux-wireless@vger.kernel.org Cc: netdev@vger.kernel.org Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-09-21mac80211: use offsetofend()Johannes Berg
This was created using the following spatch: @find@ type S; expression M, M2; position p; @@ offsetof(S, M) + sizeof(M2)@p @script:python@ m << find.M; m2 << find.M2; @@ if not m2.endswith('-> ' + m): cocci.include_match(False) @change@ type find.S; expression find.M, find.M2; position find.p; @@ -offsetof(S, M) + sizeof(M2)@p +offsetofend(S, M) Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-06-16networking: make skb_put & friends return void pointersJohannes Berg
It seems like a historic accident that these return unsigned char *, and in many places that means casts are required, more often than not. Make these functions (skb_put, __skb_put and pskb_put) return void * and remove all the casts across the tree, adding a (u8 *) cast only where the unsigned char pointer was used directly, all done with the following spatch: @@ expression SKB, LEN; typedef u8; identifier fn = { skb_put, __skb_put }; @@ - *(fn(SKB, LEN)) + *(u8 *)fn(SKB, LEN) @@ expression E, SKB, LEN; identifier fn = { skb_put, __skb_put }; type T; @@ - E = ((T *)(fn(SKB, LEN))) + E = fn(SKB, LEN) which actually doesn't cover pskb_put since there are only three users overall. A handful of stragglers were converted manually, notably a macro in drivers/isdn/i4l/isdn_bsdcomp.c and, oddly enough, one of the many instances in net/bluetooth/hci_sock.c. In the former file, I also had to fix one whitespace problem spatch introduced. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-16networking: introduce and use skb_put_data()Johannes Berg
A common pattern with skb_put() is to just want to memcpy() some data into the new space, introduce skb_put_data() for this. An spatch similar to the one for skb_put_zero() converts many of the places using it: @@ identifier p, p2; expression len, skb, data; type t, t2; @@ ( -p = skb_put(skb, len); +p = skb_put_data(skb, data, len); | -p = (t)skb_put(skb, len); +p = skb_put_data(skb, data, len); ) ( p2 = (t2)p; -memcpy(p2, data, len); | -memcpy(p, data, len); ) @@ type t, t2; identifier p, p2; expression skb, data; @@ t *p; ... ( -p = skb_put(skb, sizeof(t)); +p = skb_put_data(skb, data, sizeof(t)); | -p = (t *)skb_put(skb, sizeof(t)); +p = skb_put_data(skb, data, sizeof(t)); ) ( p2 = (t2)p; -memcpy(p2, data, sizeof(*p)); | -memcpy(p, data, sizeof(*p)); ) @@ expression skb, len, data; @@ -memcpy(skb_put(skb, len), data, len); +skb_put_data(skb, data, len); (again, manually post-processed to retain some comments) Reviewed-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-16networking: convert many more places to skb_put_zero()Johannes Berg
There were many places that my previous spatch didn't find, as pointed out by yuan linyu in various patches. The following spatch found many more and also removes the now unnecessary casts: @@ identifier p, p2; expression len; expression skb; type t, t2; @@ ( -p = skb_put(skb, len); +p = skb_put_zero(skb, len); | -p = (t)skb_put(skb, len); +p = skb_put_zero(skb, len); ) ... when != p ( p2 = (t2)p; -memset(p2, 0, len); | -memset(p, 0, len); ) @@ type t, t2; identifier p, p2; expression skb; @@ t *p; ... ( -p = skb_put(skb, sizeof(t)); +p = skb_put_zero(skb, sizeof(t)); | -p = (t *)skb_put(skb, sizeof(t)); +p = skb_put_zero(skb, sizeof(t)); ) ... when != p ( p2 = (t2)p; -memset(p2, 0, sizeof(*p)); | -memset(p, 0, sizeof(*p)); ) @@ expression skb, len; @@ -memset(skb_put(skb, len), 0, len); +skb_put_zero(skb, len); Apply it to the tree (with one manual fixup to keep the comment in vxlan.c, which spatch removed.) Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-30skbuff/mac80211: introduce and use skb_put_zero()Johannes Berg
This pattern was introduced a number of times in mac80211 just now, and since it's present in a number of other places it makes sense to add a little helper for it. This just adds the helper and transforms the mac80211 code, a later patch will transform other places. Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-05-24mac80211: enable VHT for mesh channel processingSimon Wunderlich
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-05-24mac80211: mesh: support sending wide bandwidth CSASimon Wunderlich
To support HT and VHT CSA, beacons and action frames must include the corresponding IEs. Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de> [make ieee80211_ie_build_wide_bw_cs() return void] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-05-19mac80211: mark as action frame when parsing IEs of CSA action framesSimon Wunderlich
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-05-19mac80211: mesh: Allow following CSA to DFS channels if userspace handles itBenjamin Berg
If userspace has flagged support for DFS earlier, then we can follow CSA to DFS channels. So instead of rejecting the switch, allow it to happen if the flag has been set during mesh setup. Signed-off-by: Benjamin Berg <benjamin@sipsolutions.net> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-05-19mac80211: move clearing result into ieee80211_parse_ch_switch_ie()Johannes Berg
Clear the csa_ie in ieee80211_parse_ch_switch_ie() where the data is filled in, rather than in each caller. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-05-19mac80211: mesh: mark channel as unusable if a regulatory MESH CSA is receivedBenjamin Berg
In the Mesh Channel Switch Parameters (8.4.2.105) the reason is specified to WLAN_REASON_MESH_CHAN_REGULATORY in the case that a regulatory limitation was the cause for the switch. This means another station detected a radar event. Mark the channel as unusable if this happens. Signed-off-by: Benjamin Berg <benjamin@sipsolutions.net> [sw: style cleanup, rebase] Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-04-28mac80211: Fix possible sband related NULL pointer de-referenceMohammed Shafi Shajakhan
Existing API 'ieee80211_get_sdata_band' returns default 2 GHz band even if the channel context configuration is NULL. This crashes for chipsets which support 5 Ghz alone when it tries to access members of 'sband'. Channel context configuration can be NULL in multivif case and when channel switch is in progress (or) when it fails. Fix this by replacing the API 'ieee80211_get_sdata_band' with 'ieee80211_get_sband' which returns a NULL pointer for sband when the channel configuration is NULL. An example scenario is as below: In multivif mode (AP + STA) with drivers like ath10k, when we do a channel switch in the AP vif (which has a number of clients connected) and a STA vif which is connected to some other AP, when the channel switch in AP vif fails, while the STA vifs tries to connect to the other AP, there is a window where the channel context is NULL/invalid and this results in a crash while the clients connected to the AP vif tries to reconnect and this race is very similar to the one investigated by Michal in https://patchwork.kernel.org/patch/3788161/ and this does happens with hardware that supports 5Ghz alone after long hours of testing with continuous channel switch on the AP vif ieee80211 phy0: channel context reservation cannot be finalized because some interfaces aren't switching wlan0: failed to finalize CSA, disconnecting wlan0-1: deauthenticating from 8c:fd:f0:01:54:9c by local choice (Reason: 3=DEAUTH_LEAVING) WARNING: CPU: 1 PID: 19032 at net/mac80211/ieee80211_i.h:1013 sta_info_alloc+0x374/0x3fc [mac80211] [<bf77272c>] (sta_info_alloc [mac80211]) [<bf78776c>] (ieee80211_add_station [mac80211])) [<bf73cc50>] (nl80211_new_station [cfg80211]) Unable to handle kernel NULL pointer dereference at virtual address 00000014 pgd = d5f4c000 Internal error: Oops: 17 [#1] PREEMPT SMP ARM PC is at sta_info_alloc+0x380/0x3fc [mac80211] LR is at sta_info_alloc+0x37c/0x3fc [mac80211] [<bf772738>] (sta_info_alloc [mac80211]) [<bf78776c>] (ieee80211_add_station [mac80211]) [<bf73cc50>] (nl80211_new_station [cfg80211])) Cc: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qti.qualcomm.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-03-29mac80211: mesh: drop new node with weak powerMasashi Honma
On some practical cases, it is useful to drop new node in the distance. Because mesh metric is calculated with hop count and without RSSI information, a node far from local peer and near to destination node could be used as best path. For example, the nodes are located in linear. Distance of 0 - 1 and 1 - 2 and 2 - 3 is 20meters. 0 to 3 signal is very weak. 0 --- 1 --- 2 --- 3 Though most robust path from 0 to 3 is 0 -> 1 -> 2 -> 3, unfortunately, node 0 could recognize node 3 as neighbor. Then node 3 could be next of node 0. This patch aims to avoid such a case. [Johannes:] Dropping the node entirely isn't ideal, but at least with encryption there will be a limit on # of keys the hardware can deal with, and there might also be a limit on the number of stations it supports. Signed-off-by: Masashi Honma <masashi.honma@gmail.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-02-27scripts/spelling.txt: add "swith" pattern and fix typo instancesMasahiro Yamada
Fix typos and add the following to the scripts/spelling.txt: swith||switch swithable||switchable swithed||switched swithing||switching While we are here, fix the "update" to "updates" in the touched hunk in drivers/net/wireless/marvell/mwifiex/wmm.c. Link: http://lkml.kernel.org/r/1481573103-11329-2-git-send-email-yamada.masahiro@socionext.com Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-07Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
The conflict was an interaction between a bug fix in the netvsc driver in 'net' and an optimization of the RX path in 'net-next'. Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-06mac80211: Fix adding of mesh vendor IEsThorsten Horstmann
The function ieee80211_ie_split_vendor doesn't return 0 on errors. Instead it returns any offset < ielen when WLAN_EID_VENDOR_SPECIFIC is found. The return value in mesh_add_vendor_ies must therefore be checked against ifmsh->ie_len and not 0. Otherwise all ifmsh->ie starting with WLAN_EID_VENDOR_SPECIFIC will be rejected. Fixes: 082ebb0c258d ("mac80211: fix mesh beacon format") Signed-off-by: Thorsten Horstmann <thorsten@defutech.de> Signed-off-by: Mathias Kretschmer <mathias.kretschmer@fit.fraunhofer.de> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de> [sven@narfation.org: Add commit message] Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-01-02mac80211: Fix addition of mesh configuration elementIlan peer
The code was setting the capabilities byte to zero, after it was already properly set previously. Fix it. The bug was found while debugging hwsim mesh tests failures that happened since the commit mentioned below. Fixes: 76f43b4c0a93 ("mac80211: Remove invalid flag operations in mesh TSF synchronization") Signed-off-by: Ilan Peer <ilan.peer@intel.com> Reviewed-by: Masashi Honma <masashi.honma@gmail.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-12-13mac80211: Use appropriate name for functions and messagesMasashi Honma
These functions drifts TSF timers, not TBTT. Signed-off-by: Masashi Honma <masashi.honma@gmail.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-12-13mac80211: Remove invalid flag operations in mesh TSF synchronizationMasashi Honma
mesh_sync_offset_adjust_tbtt() implements Extensible synchronization framework ([1] 13.13.2 Extensible synchronization framework). It shall not operate the flag "TBTT Adjusting subfield" ([1] 8.4.2.100.8 Mesh Capability), since it is used only for MBCA ([1] 13.13.4 Mesh beacon collision avoidance, see 13.13.4.4.3 TBTT scanning and adjustment procedures for detail). So this patch remove the flag operations. [1] IEEE Std 802.11 2012 Signed-off-by: Masashi Honma <masashi.honma@gmail.com> [remove adjusting_tbtt entirely, since it's now unused] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-08-03mac80211: mesh: flush stations before beacons are stoppedMaital Hahn
Some drivers (e.g. wl18xx) expect that the last stage in the de-initialization process will be stopping the beacons, similar to AP flow. Update ieee80211_stop_mesh() flow accordingly. As peers can be removed dynamically, this would not impact other drivers. Tested also on Ralink RT3572 chipset. Signed-off-by: Maital Hahn <maitalm@ti.com> Signed-off-by: Yaniv Machani <yanivma@ti.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-06-30mac80211: use common cleanup for user/!user_mpmBob Copeland
We've accumulated a couple of different fixes now to mesh_sta_cleanup() due to the different paths that user_mpm and !user_mpm cases take -- one fix to flush nexthop paths and one to fix the counting. The only caller of mesh_plink_deactivate() is mesh_sta_cleanup(), so we can push the user_mpm checks down into there in order to share more code. In doing so, we can remove an extra call to mesh_path_flush_by_nexthop() and the (unnecessary) call to mesh_accept_plinks_update(). This will also ensure the powersaving state code gets called in the user_mpm case. The only cleanup tasks we need to avoid when MPM is in user-space are sending the peering frames and stopping the plink timer, so wrap those in the appropriate check. Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
2016-06-28mac80211: Fix mesh estab_plinks counting in STA removal caseJouni Malinen
If a user space program (e.g., wpa_supplicant) deletes a STA entry that is currently in NL80211_PLINK_ESTAB state, the number of established plinks counter was not decremented and this could result in rejecting new plink establishment before really hitting the real maximum plink limit. For !user_mpm case, this decrementation is handled by mesh_plink_deactive(). Fix this by decrementing estab_plinks on STA deletion (mesh_sta_cleanup() gets called from there) so that the counter has a correct value and the Beacon frame advertisement in Mesh Configuration element shows the proper value for capability to accept additional peers. Cc: stable@vger.kernel.org Signed-off-by: Jouni Malinen <j@w1.fi> Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
2016-05-31mac80211: mesh: flush mesh paths unconditionallyBob Copeland
Currently, the mesh paths associated with a nexthop station are cleaned up in the following code path: __sta_info_destroy_part1 synchronize_net() __sta_info_destroy_part2 -> cleanup_single_sta -> mesh_sta_cleanup -> mesh_plink_deactivate -> mesh_path_flush_by_nexthop However, there are a couple of problems here: 1) the paths aren't flushed at all if the MPM is running in userspace (e.g. when using wpa_supplicant or authsae) 2) there is no synchronize_rcu between removing the path and readers accessing the nexthop, which means the following race is possible: CPU0 CPU1 ~~~~ ~~~~ sta_info_destroy_part1() synchronize_net() rcu_read_lock() mesh_nexthop_resolve() mpath = mesh_path_lookup() [...] -> mesh_path_flush_by_nexthop() sta = rcu_dereference( mpath->next_hop) kfree(sta) access sta <-- CRASH Fix both of these by unconditionally flushing paths before destroying the sta, and by adding a synchronize_net() after path flush to ensure no active readers can still dereference the sta. Fixes this crash: [ 348.529295] BUG: unable to handle kernel paging request at 00020040 [ 348.530014] IP: [<f929245d>] ieee80211_mps_set_frame_flags+0x40/0xaa [mac80211] [ 348.530014] *pde = 00000000 [ 348.530014] Oops: 0000 [#1] PREEMPT [ 348.530014] Modules linked in: drbg ansi_cprng ctr ccm ppp_generic slhc ipt_MASQUERADE nf_nat_masquerade_ipv4 8021q ] [ 348.530014] CPU: 0 PID: 20597 Comm: wget Tainted: G O 4.6.0-rc5-wt=V1 #1 [ 348.530014] Hardware name: To Be Filled By O.E.M./To be filled by O.E.M., BIOS 080016 11/07/2014 [ 348.530014] task: f64fa280 ti: f4f9c000 task.ti: f4f9c000 [ 348.530014] EIP: 0060:[<f929245d>] EFLAGS: 00010246 CPU: 0 [ 348.530014] EIP is at ieee80211_mps_set_frame_flags+0x40/0xaa [mac80211] [ 348.530014] EAX: f4ce63e0 EBX: 00000088 ECX: f3788416 EDX: 00020008 [ 348.530014] ESI: 00000000 EDI: 00000088 EBP: f6409a4c ESP: f6409a40 [ 348.530014] DS: 007b ES: 007b FS: 0000 GS: 0033 SS: 0068 [ 348.530014] CR0: 80050033 CR2: 00020040 CR3: 33190000 CR4: 00000690 [ 348.530014] Stack: [ 348.530014] 00000000 f4ce63e0 f5f9bd80 f6409a64 f9291d80 0000ce67 f5d51e00 f4ce63e0 [ 348.530014] f3788416 f6409a80 f9291dc1 f4ce8320 f4ce63e0 f5d51e00 f4ce63e0 f4ce8320 [ 348.530014] f6409a98 f9277f6f 00000000 00000000 0000007c 00000000 f6409b2c f9278dd1 [ 348.530014] Call Trace: [ 348.530014] [<f9291d80>] mesh_nexthop_lookup+0xbb/0xc8 [mac80211] [ 348.530014] [<f9291dc1>] mesh_nexthop_resolve+0x34/0xd8 [mac80211] [ 348.530014] [<f9277f6f>] ieee80211_xmit+0x92/0xc1 [mac80211] [ 348.530014] [<f9278dd1>] __ieee80211_subif_start_xmit+0x807/0x83c [mac80211] [ 348.530014] [<c04df012>] ? sch_direct_xmit+0xd7/0x1b3 [ 348.530014] [<c022a8c6>] ? __local_bh_enable_ip+0x5d/0x7b [ 348.530014] [<f956870c>] ? nf_nat_ipv4_out+0x4c/0xd0 [nf_nat_ipv4] [ 348.530014] [<f957e036>] ? iptable_nat_ipv4_fn+0xf/0xf [iptable_nat] [ 348.530014] [<c04c6f45>] ? netif_skb_features+0x14d/0x30a [ 348.530014] [<f9278e10>] ieee80211_subif_start_xmit+0xa/0xe [mac80211] [ 348.530014] [<c04c769c>] dev_hard_start_xmit+0x1f8/0x267 [ 348.530014] [<c04c7261>] ? validate_xmit_skb.isra.120.part.121+0x10/0x253 [ 348.530014] [<c04defc6>] sch_direct_xmit+0x8b/0x1b3 [ 348.530014] [<c04c7a9c>] __dev_queue_xmit+0x2c8/0x513 [ 348.530014] [<c04c7cfb>] dev_queue_xmit+0xa/0xc [ 348.530014] [<f91bfc7a>] batadv_send_skb_packet+0xd6/0xec [batman_adv] [ 348.530014] [<f91bfdc4>] batadv_send_unicast_skb+0x15/0x4a [batman_adv] [ 348.530014] [<f91b5938>] batadv_dat_send_data+0x27e/0x310 [batman_adv] [ 348.530014] [<f91c30b5>] ? batadv_tt_global_hash_find.isra.11+0x8/0xa [batman_adv] [ 348.530014] [<f91b63f3>] batadv_dat_snoop_outgoing_arp_request+0x208/0x23d [batman_adv] [ 348.530014] [<f91c0cd9>] batadv_interface_tx+0x206/0x385 [batman_adv] [ 348.530014] [<c04c769c>] dev_hard_start_xmit+0x1f8/0x267 [ 348.530014] [<c04c7261>] ? validate_xmit_skb.isra.120.part.121+0x10/0x253 [ 348.530014] [<c04defc6>] sch_direct_xmit+0x8b/0x1b3 [ 348.530014] [<c04c7a9c>] __dev_queue_xmit+0x2c8/0x513 [ 348.530014] [<f80cbd2a>] ? igb_xmit_frame+0x57/0x72 [igb] [ 348.530014] [<c04c7cfb>] dev_queue_xmit+0xa/0xc [ 348.530014] [<f843a326>] br_dev_queue_push_xmit+0xeb/0xfb [bridge] [ 348.530014] [<f843a35f>] br_forward_finish+0x29/0x74 [bridge] [ 348.530014] [<f843a23b>] ? deliver_clone+0x3b/0x3b [bridge] [ 348.530014] [<f843a714>] __br_forward+0x89/0xe7 [bridge] [ 348.530014] [<f843a336>] ? br_dev_queue_push_xmit+0xfb/0xfb [bridge] [ 348.530014] [<f843a234>] deliver_clone+0x34/0x3b [bridge] [ 348.530014] [<f843a68b>] ? br_flood+0x95/0x95 [bridge] [ 348.530014] [<f843a66d>] br_flood+0x77/0x95 [bridge] [ 348.530014] [<f843a809>] br_flood_forward+0x13/0x1a [bridge] [ 348.530014] [<f843a68b>] ? br_flood+0x95/0x95 [bridge] [ 348.530014] [<f843b877>] br_handle_frame_finish+0x392/0x3db [bridge] [ 348.530014] [<c04e9b2b>] ? nf_iterate+0x2b/0x6b [ 348.530014] [<f843baa6>] br_handle_frame+0x1e6/0x240 [bridge] [ 348.530014] [<f843b4e5>] ? br_handle_local_finish+0x6a/0x6a [bridge] [ 348.530014] [<c04c4ba0>] __netif_receive_skb_core+0x43a/0x66b [ 348.530014] [<f843b8c0>] ? br_handle_frame_finish+0x3db/0x3db [bridge] [ 348.530014] [<c023cea4>] ? resched_curr+0x19/0x37 [ 348.530014] [<c0240707>] ? check_preempt_wakeup+0xbf/0xfe [ 348.530014] [<c0255dec>] ? ktime_get_with_offset+0x5c/0xfc [ 348.530014] [<c04c4fc1>] __netif_receive_skb+0x47/0x55 [ 348.530014] [<c04c57ba>] netif_receive_skb_internal+0x40/0x5a [ 348.530014] [<c04c61ef>] napi_gro_receive+0x3a/0x94 [ 348.530014] [<f80ce8d5>] igb_poll+0x6fd/0x9ad [igb] [ 348.530014] [<c0242bd8>] ? swake_up_locked+0x14/0x26 [ 348.530014] [<c04c5d29>] net_rx_action+0xde/0x250 [ 348.530014] [<c022a743>] __do_softirq+0x8a/0x163 [ 348.530014] [<c022a6b9>] ? __hrtimer_tasklet_trampoline+0x19/0x19 [ 348.530014] [<c021100f>] do_softirq_own_stack+0x26/0x2c [ 348.530014] <IRQ> [ 348.530014] [<c022a957>] irq_exit+0x31/0x6f [ 348.530014] [<c0210eb2>] do_IRQ+0x8d/0xa0 [ 348.530014] [<c058152c>] common_interrupt+0x2c/0x40 [ 348.530014] Code: e7 8c 00 66 81 ff 88 00 75 12 85 d2 75 0e b2 c3 b8 83 e9 29 f9 e8 a7 5f f9 c6 eb 74 66 81 e3 8c 005 [ 348.530014] EIP: [<f929245d>] ieee80211_mps_set_frame_flags+0x40/0xaa [mac80211] SS:ESP 0068:f6409a40 [ 348.530014] CR2: 0000000000020040 [ 348.530014] ---[ end trace 48556ac26779732e ]--- [ 348.530014] Kernel panic - not syncing: Fatal exception in interrupt [ 348.530014] Kernel Offset: disabled Cc: stable@vger.kernel.org Reported-by: Fred Veldini <fred.veldini@gmail.com> Tested-by: Fred Veldini <fred.veldini@gmail.com> Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-04-12cfg80211: remove enum ieee80211_bandJohannes Berg
This enum is already perfectly aliased to enum nl80211_band, and the only reason for it is that we get IEEE80211_NUM_BANDS out of it. There's no really good reason to not declare the number of bands in nl80211 though, so do that and remove the cfg80211 one. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-04-05mac80211: mesh: fix cleanup for mesh pathtableBob Copeland
The mesh path table needs to be around for the entire time the interface is in mesh mode, as users can perform an mpath dump at any time. The existing path table lifetime is instead tied to the mesh BSS which can cause crashes when different MBSSes are joined in the context of a single interface, or when the path table is dumped when no MBSS is joined. Introduce a new function to perform the final teardown of the interface and perform path table cleanup there. We already free the individual path elements when the leaving the mesh so no additional cleanup is needed there. This fixes the following crash: [ 47.753026] BUG: unable to handle kernel paging request at fffffff0 [ 47.753026] IP: [<c0239765>] kthread_data+0xa/0xe [ 47.753026] *pde = 00741067 *pte = 00000000 [ 47.753026] Oops: 0000 [#4] PREEMPT [ 47.753026] Modules linked in: ppp_generic slhc 8021q garp mrp sch_fq_codel iptable_mangle ipt_MASQUERADE nf_nat_masquerade_ipv4 iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_nat ip_tables ath9k_htc ath5k 8139too ath10k_pci ath10k_core arc4 ath9k ath9k_common ath9k_hw mac80211 ath cfg80211 cpufreq_powersave br_netfilter bridge stp llc ipw usb_wwan sierra_net usbnet af_alg natsemi via_rhine mii iTCO_wdt iTCO_vendor_support gpio_ich sierra coretemp pcspkr i2c_i801 lpc_ich ata_generic ata_piix libata ide_pci_generic piix e1000e igb i2c_algo_bit ptp pps_core [last unloaded: 8139too] [ 47.753026] CPU: 0 PID: 12 Comm: kworker/u2:1 Tainted: G D W 4.5.0-wt-V3 #6 [ 47.753026] Hardware name: To Be Filled By O.E.M./To be filled by O.E.M., BIOS 080016 11/07/2014 [ 47.753026] task: f645a0c0 ti: f6462000 task.ti: f6462000 [ 47.753026] EIP: 0060:[<c0239765>] EFLAGS: 00010002 CPU: 0 [ 47.753026] EIP is at kthread_data+0xa/0xe [ 47.753026] EAX: 00000000 EBX: 00000000 ECX: 00000000 EDX: 00000000 [ 47.753026] ESI: f645a0c0 EDI: f645a2fc EBP: f6463a80 ESP: f6463a78 [ 47.753026] DS: 007b ES: 007b FS: 0000 GS: 0000 SS: 0068 [ 47.753026] CR0: 8005003b CR2: 00000014 CR3: 353e5000 CR4: 00000690 [ 47.753026] Stack: [ 47.753026] c0236866 00000000 f6463aac c05768b4 00000009 f6463ba8 f6463ab0 c0247010 [ 47.753026] 00000000 f645a0c0 f6464000 00000009 f6463ba8 f6463ab8 c0576eb2 f645a0c0 [ 47.753026] f6463aec c0228be4 c06335a4 f6463adc f6463ad0 c06c06d4 f6463ae4 c02471b0 [ 47.753026] Call Trace: [ 47.753026] [<c0236866>] ? wq_worker_sleeping+0xb/0x78 [ 47.753026] [<c05768b4>] __schedule+0xda/0x587 [ 47.753026] [<c0247010>] ? vprintk_default+0x12/0x14 [ 47.753026] [<c0576eb2>] schedule+0x72/0x89 [ 47.753026] [<c0228be4>] do_exit+0xb8/0x71d [ 47.753026] [<c02471b0>] ? kmsg_dump+0xa9/0xae [ 47.753026] [<c0203576>] oops_end+0x69/0x70 [ 47.753026] [<c021dcdb>] no_context+0x1bb/0x1c5 [ 47.753026] [<c021de1b>] __bad_area_nosemaphore+0x136/0x140 [ 47.753026] [<c021e2ef>] ? vmalloc_sync_all+0x19a/0x19a [ 47.753026] [<c021de32>] bad_area_nosemaphore+0xd/0x10 [ 47.753026] [<c021e0a1>] __do_page_fault+0x26c/0x320 [ 47.753026] [<c021e2ef>] ? vmalloc_sync_all+0x19a/0x19a [ 47.753026] [<c021e2fa>] do_page_fault+0xb/0xd [ 47.753026] [<c05798f8>] error_code+0x58/0x60 [ 47.753026] [<c021e2ef>] ? vmalloc_sync_all+0x19a/0x19a [ 47.753026] [<c0239765>] ? kthread_data+0xa/0xe [ 47.753026] [<c0236866>] ? wq_worker_sleeping+0xb/0x78 [ 47.753026] [<c05768b4>] __schedule+0xda/0x587 [ 47.753026] [<c0247010>] ? vprintk_default+0x12/0x14 [ 47.753026] [<c0576eb2>] schedule+0x72/0x89 [ 47.753026] [<c0228be4>] do_exit+0xb8/0x71d [ 47.753026] [<c02471b0>] ? kmsg_dump+0xa9/0xae [ 47.753026] [<c0203576>] oops_end+0x69/0x70 [ 47.753026] [<c021dcdb>] no_context+0x1bb/0x1c5 [ 47.753026] [<c021de1b>] __bad_area_nosemaphore+0x136/0x140 [ 47.753026] [<c021e2ef>] ? vmalloc_sync_all+0x19a/0x19a [ 47.753026] [<c021de32>] bad_area_nosemaphore+0xd/0x10 [ 47.753026] [<c021e0a1>] __do_page_fault+0x26c/0x320 [ 47.753026] [<c021e2ef>] ? vmalloc_sync_all+0x19a/0x19a [ 47.753026] [<c021e2fa>] do_page_fault+0xb/0xd [ 47.753026] [<c05798f8>] error_code+0x58/0x60 [ 47.753026] [<c021e2ef>] ? vmalloc_sync_all+0x19a/0x19a [ 47.753026] [<c0239765>] ? kthread_data+0xa/0xe [ 47.753026] [<c0236866>] ? wq_worker_sleeping+0xb/0x78 [ 47.753026] [<c05768b4>] __schedule+0xda/0x587 [ 47.753026] [<c0391e32>] ? put_io_context_active+0x6d/0x95 [ 47.753026] [<c0576eb2>] schedule+0x72/0x89 [ 47.753026] [<c02291f8>] do_exit+0x6cc/0x71d [ 47.753026] [<c0203576>] oops_end+0x69/0x70 [ 47.753026] [<c021dcdb>] no_context+0x1bb/0x1c5 [ 47.753026] [<c021de1b>] __bad_area_nosemaphore+0x136/0x140 [ 47.753026] [<c021e2ef>] ? vmalloc_sync_all+0x19a/0x19a [ 47.753026] [<c021de32>] bad_area_nosemaphore+0xd/0x10 [ 47.753026] [<c021e0a1>] __do_page_fault+0x26c/0x320 [ 47.753026] [<c03b9160>] ? debug_smp_processor_id+0x12/0x16 [ 47.753026] [<c02015e2>] ? __switch_to+0x24/0x40e [ 47.753026] [<c021e2ef>] ? vmalloc_sync_all+0x19a/0x19a [ 47.753026] [<c021e2fa>] do_page_fault+0xb/0xd [ 47.753026] [<c05798f8>] error_code+0x58/0x60 [ 47.753026] [<c021e2ef>] ? vmalloc_sync_all+0x19a/0x19a [ 47.753026] [<c03b59d2>] ? rhashtable_walk_init+0x5c/0x93 [ 47.753026] [<f9843221>] mesh_path_tbl_expire.isra.24+0x19/0x82 [mac80211] [ 47.753026] [<f984408b>] mesh_path_expire+0x11/0x1f [mac80211] [ 47.753026] [<f9842bb7>] ieee80211_mesh_work+0x73/0x1a9 [mac80211] [ 47.753026] [<f98207d1>] ieee80211_iface_work+0x2ff/0x311 [mac80211] [ 47.753026] [<c0235fa3>] process_one_work+0x14b/0x24e [ 47.753026] [<c0236313>] worker_thread+0x249/0x343 [ 47.753026] [<c02360ca>] ? process_scheduled_works+0x24/0x24 [ 47.753026] [<c0239359>] kthread+0x9e/0xa3 [ 47.753026] [<c0578e50>] ret_from_kernel_thread+0x20/0x40 [ 47.753026] [<c02392bb>] ? kthread_parkme+0x18/0x18 [ 47.753026] Code: 6b c0 85 c0 75 05 e8 fb 74 fc ff 89 f8 84 c0 75 08 8d 45 e8 e8 34 dd 33 00 83 c4 28 5b 5e 5f 5d c3 55 8b 80 10 02 00 00 89 e5 5d <8b> 40 f0 c3 55 b9 04 00 00 00 89 e5 52 8b 90 10 02 00 00 8d 45 [ 47.753026] EIP: [<c0239765>] kthread_data+0xa/0xe SS:ESP 0068:f6463a78 [ 47.753026] CR2: 00000000fffffff0 [ 47.753026] ---[ end trace 867ca0bdd0767790 ]--- Fixes: 3b302ada7f0a ("mac80211: mesh: move path tables into if_mesh") Reported-by: Fred Veldini <fred.veldini@gmail.com> Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-04-05mac80211: mesh: use hlist for rmc cacheBob Copeland
The RMC cache has 256 list heads plus a u32, which puts it at the unfortunate size of 4104 bytes with padding. kmalloc() will then round this up to the next power-of-two, so we wind up actually using two pages here where most of the second is wasted. Switch to hlist heads here to reduce the structure size down to fit within a page. Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-04-05mac80211: mesh: handle failed alloc for rmc cacheBob Copeland
In the unlikely case that mesh_rmc_init() fails with -ENOMEM, the rmc pointer will be left as NULL but the interface is still operational because ieee80211_mesh_init_sdata() is not allowed to fail. If this happens, we would blindly dereference rmc when checking whether a multicast frame is in the cache. Instead just drop the frames in the forwarding path. Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-04-05mac80211: mesh: convert path table to rhashtableBob Copeland
In the time since the mesh path table was implemented as an RCU-traversable, dynamically growing hash table, a generic RCU hashtable implementation was added to the kernel. Switch the mesh path table over to rhashtable to remove some code and also gain some features like automatic shrinking. Cc: Thomas Graf <tgraf@suug.ch> Cc: netdev@vger.kernel.org Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-04-05mac80211: mesh: move path tables into if_meshBob Copeland
The mesh path and mesh gate hashtables are global, containing all of the mpaths for every mesh interface, but the paths are all tied logically to a single interface. The common case is just a single mesh interface, so optimize for that by moving the global hashtable into the per-interface struct. Doing so allows us to drop sdata pointer comparisons inside the lookups and also saves a few bytes of BSS and data. Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-03-01Merge tag 'mac80211-next-for-davem-2016-02-26' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next Johannes Berg says: ==================== Here's another round of updates for -next: * big A-MSDU RX performance improvement (avoid linearize of paged RX) * rfkill changes: cleanups, documentation, platform properties * basic PBSS support in cfg80211 * MU-MIMO action frame processing support * BlockAck reordering & duplicate detection offload support * various cleanups & little fixes ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-24mac80211: refactor HT/VHT to chandef codeJohannes Berg
The station MLME and IBSS/mesh ones use entirely different code for interpreting HT and VHT operation elements. Change the code that interprets them a bit - it now modifies an existing chandef - and use it also in the MLME code. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-01-26mac80211: Requeue work after scan complete for all VIF types.Sachin Kulkarni
During a sw scan ieee80211_iface_work ignores work items for all vifs. However after the scan complete work is requeued only for STA, ADHOC and MESH iftypes. This occasionally results in event processing getting delayed/not processed for iftype AP when it coexists with a STA. This can result in data halt and eventually disconnection on the AP interface. Cc: stable@vger.kernel.org Signed-off-by: Sachin Kulkarni <Sachin.Kulkarni@imgtec.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-11-03mac80211: TDLS: add proper HT-oper IEArik Nemtsov
When 11n peers performs a TDLS connection on a legacy BSS, the HT operation IE must be specified according to IEEE802.11-2012 section 9.23.3.2. Otherwise HT-protection is compromised and the medium becomes noisy for both the TDLS and the BSS links. Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-10-05mac80211: make ieee80211_new_mesh_header return unsignedAndrzej Hajda
The function returns always non-negative values. The problem has been detected using proposed semantic patch scripts/coccinelle/tests/assign_signed_to_unsigned.cocci [1]. [1]: http://permalink.gmane.org/gmane.linux.kernel/2046107 Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-09-22mac80211: implement VHT support for meshBob Copeland
Implement the basics required for supporting very high throughput with mesh: include VHT information elements in beacons, probe responses, and peering action frames, and check for compatible VHT configurations when peering. Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-07-17mac80211: move mesh related station fields to own structJohannes Berg
There are now a fairly large number of mesh fields that really aren't needed in any other modes; move those into their own structure and allocate them separately. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-06-09mac80211: fix the beacon csa counter for mesh and ibssChun-Yeow Yeoh
The csa counter has moved from sdata to beacon/presp but it is not updated accordingly for mesh and ibss. Fix this. Fixes: af296bdb8da4 ("mac80211: move csa counters from sdata to beacon/presp") Signed-off-by: Chun-Yeow Yeoh <yeohchunyeow@gmail.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-03-31Merge tag 'mac80211-next-for-davem-2015-03-30' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next Johannes Berg says: ==================== Lots of updates for net-next; along with the usual flurry of small fixes, cleanups and internal features we have: * VHT support for TDLS and IBSS (conditional on drivers though) * first TX performance improvements (the biggest will come later) * many suspend/resume (race) fixes * name_assign_type support from Tom Gundersen ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-03mac80211: Use eth_<foo>_addr instead of memsetJoe Perches
Use the built-in function instead of memset. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-28nl/mac80211: allow zero plink timeout to disable STA expirationMasashi Honma
Both wpa_supplicant and mac80211 have and inactivity timer. By default wpa_supplicant will be timed out in 5 minutes and mac80211's it is 30 minutes. If wpa_supplicant uses a longer timer than mac80211, it will get unexpected disconnection by mac80211. Using 0xffffffff instead as the configured value could solve this w/o changing the code, but due to integer overflow in the expression used this doesn't work. The expression is: (current jiffies) > (frame Rx jiffies + NL80211_MESHCONF_PLINK_TIMEOUT * 250) On 32bit system, the right side would overflow and be a very small value if NL80211_MESHCONF_PLINK_TIMEOUT is sufficiently large, causing unexpectedly early disconnections. Instead allow disabling the inactivity timer to avoid this situation, by passing the (previously invalid and useless) value 0. Signed-off-by: Masashi Honma <masashi.honma@gmail.com> [reword/rewrap commit log] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-10-29mac80211: use secondary channel offset IE also beacons during CSALuciano Coelho
If we are switching from an HT40+ to an HT40- channel (or vice-versa), we need the secondary channel offset IE to specify what is the post-CSA offset to be used. This applies both to beacons and to probe responses. In ieee80211_parse_ch_switch_ie() we were ignoring this IE from beacons and using the *current* HT information IE instead. This was causing us to use the same offset as before the switch. Fix that by using the secondary channel offset IE also for beacons and don't ever use the pre-switch offset. Additionally, remove the "beacon" argument from ieee80211_parse_ch_switch_ie(), since it's not needed anymore. Cc: stable@vger.kernel.org Reported-by: Jouni Malinen <j@w1.fi> Signed-off-by: Luciano Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-06-23mac80211: move csa counters from sdata to beacon/prespMichal Kazior
Having csa counters part of beacon and probe_resp structures makes it easier to get rid of possible races between setting a beacon and updating counters on SMP systems by guaranteeing counters are always consistent against given beacon struct. While at it relax WARN_ON into WARN_ON_ONCE to prevent spamming logs and racing. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> [remove pointless array check] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-06-23trivial: net/mac80211/mesh.c: fix typo s/Substract/Subtract/Antonio Ospite
Signed-off-by: Antonio Ospite <ao2@ao2.it> Cc: Luis Carlos Cobo <luisca@cozybit.com> Cc: Johannes Berg <johannes@sipsolutions.net> Cc: linux-wireless@vger.kernel.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-05-15mac80211: Support multiple CSA countersAndrei Otcheretianski
Support up to IEEE80211_MAX_CSA_COUNTERS_NUM csa counters. This is defined to be 2 now, to support both CSA and eCSA counters. Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com> Signed-off-by: Luciano Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-04-22mac80211: fix mesh_add_rsn_ie IE finding loopBob Copeland
Previously, the code to copy the RSN IE from the mesh config would increment its pointer by one in the loop instead of by the element length, so there was the potential for mistaking another IE's data fields as the RSN IE. cfg80211_find_ie() exists, so just use that. Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-03 23:15:08 +0000