summaryrefslogtreecommitdiff
path: root/net/ipv6/ndisc.c
AgeCommit message (Collapse)Author
2019-06-07Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Some ISDN files that got removed in net-next had some changes done in mainline, take the removals. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-04ipv6: Plumb support for nexthop object in a fib6_infoDavid Ahern
Add struct nexthop and nh_list list_head to fib6_info. nh_list is the fib6_info side of the nexthop <-> fib_info relationship. Since a fib6_info referencing a nexthop object can not have 'sibling' entries (the old way of doing multipath routes), the nh_list is a union with fib6_siblings. Add f6i_list list_head to 'struct nexthop' to track fib6_info entries using a nexthop instance. Update __remove_nexthop_fib to walk f6_list and delete fib entries using the nexthop. Add a few nexthop helpers for use when a nexthop is added to fib6_info: - nexthop_fib6_nh - return first fib6_nh in a nexthop object - fib6_info_nh_dev moved to nexthop.h and updated to use nexthop_fib6_nh if the fib6_info references a nexthop object - nexthop_path_fib6_result - similar to ipv4, select a path within a multipath nexthop object. If the nexthop is a blackhole, set fib6_result type to RTN_BLACKHOLE, and set the REJECT flag Update the fib6_info references to check for nh and take a different path as needed: - rt6_qualify_for_ecmp - if a fib entry uses a nexthop object it can NOT be coalesced with other fib entries into a multipath route - rt6_duplicate_nexthop - use nexthop_cmp if either fib6_info references a nexthop - addrconf (host routes), RA's and info entries (anything configured via ndisc) does not use nexthop objects - fib6_info_destroy_rcu - put reference to nexthop object - fib6_purge_rt - drop fib6_info from f6i_list - fib6_select_path - update to use the new nexthop_path_fib6_result when fib entry uses a nexthop object - rt6_device_match - update to catch use of nexthop object as a blackhole and set fib6_type and flags. - ip6_route_info_create - don't add space for fib6_nh if fib entry is going to reference a nexthop object, take a reference to nexthop object, disallow use of source routing - rt6_nlmsg_size - add space for RTA_NH_ID - add rt6_fill_node_nexthop to add nexthop data on a dump As with ipv4, most of the changes push existing code into the else branch of whether the fib entry uses a nexthop object. Update the nexthop code to walk f6i_list on a nexthop deleted to remove fib entries referencing it. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152Thomas Gleixner
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 3029 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-24ipv6: Make fib6_nh optional at the end of fib6_infoDavid Ahern
Move fib6_nh to the end of fib6_info and make it an array of size 0. Pass a flag to fib6_info_alloc indicating if the allocation needs to add space for a fib6_nh. The current code path always has a fib6_nh allocated with a fib6_info; with nexthop objects they will be separate. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-17net ipv6: Prevent neighbor add if protocol is disabled on deviceDavid Ahern
Disabling IPv6 on an interface removes existing entries but nothing prevents new entries from being manually added. To that end, add a new neigh_table operation, allow_add, that is called on RTM_NEWNEIGH to see if neighbor entries are allowed on a given device. If IPv6 is disabled on the device, allow_add returns false and passes a message back to the user via extack. $ echo 1 > /proc/sys/net/ipv6/conf/eth1/disable_ipv6 $ ip -6 neigh add fe80::4c88:bff:fe21:2704 dev eth1 lladdr de:ad:be:ef:01:01 Error: IPv6 is disabled on this device. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-29ipv6: Rename fib6_nh entriesDavid Ahern
Rename fib6_nh entries that will be moved to a fib_nh_common struct. Specifically, the device, gateway, flags, and lwtstate are common with all nexthop definitions. In some places new temporary variables are declared or local variables renamed to maintain line lengths. Rename only; no functional change intended. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-26ipv6/ndisc: Preserve IPv6 control buffer if protocol error handlers are calledStefano Brivio
Commit a61bbcf28a8c ("[NET]: Store skb->timestamp as offset to a base timestamp") introduces a neighbour control buffer and zeroes it out in ndisc_rcv(), as ndisc_recv_ns() uses it. Commit f2776ff04722 ("[IPV6]: Fix address/interface handling in UDP and DCCP, according to the scoping architecture.") introduces the usage of the IPv6 control buffer in protocol error handlers (e.g. inet6_iif() in present-day __udp6_lib_err()). Now, with commit b94f1c0904da ("ipv6: Use icmpv6_notify() to propagate redirect, instead of rt6_redirect()."), we call protocol error handlers from ndisc_redirect_rcv(), after the control buffer is already stolen and some parts are already zeroed out. This implies that inet6_iif() on this path will always return zero. This gives unexpected results on UDP socket lookup in __udp6_lib_err(), as we might actually need to match sockets for a given interface. Instead of always claiming the control buffer in ndisc_rcv(), do that only when needed. Fixes: b94f1c0904da ("ipv6: Use icmpv6_notify() to propagate redirect, instead of rt6_redirect().") Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Reviewed-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-12net: Evict neighbor entries on carrier downDavid Ahern
When a link's carrier goes down it could be a sign of the port changing networks. If the new network has overlapping addresses with the old one, then the kernel will continue trying to use neighbor entries established based on the old network until the entries finally age out - meaning a potentially long delay with communications not working. This patch evicts neighbor entries on carrier down with the exception of those marked permanent. Permanent entries are managed by userspace (either an admin or a routing daemon such as FRR). Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-02net: remove 1 always zero parameter from ip6_redirect_no_header()Maciej Żenczykowski
(the parameter in question is mark) Signed-off-by: Maciej Żenczykowski <maze@google.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-16ipv6: make DAD fail with enhanced DAD when nonce length differsSabrina Dubroca
Commit adc176c54722 ("ipv6 addrconf: Implemented enhanced DAD (RFC7527)") added enhanced DAD with a nonce length of 6 bytes. However, RFC7527 doesn't specify the length of the nonce, other than being 6 + 8*k bytes, with integer k >= 0 (RFC3971 5.3.2). The current implementation simply assumes that the nonce will always be 6 bytes, but others systems are free to choose different sizes. If another system sends a nonce of different length but with the same 6 bytes prefix, it shouldn't be considered as the same nonce. Thus, check that the length of the received nonce is the same as the length we sent. Ugly scapy test script running on veth0: def loop(): pkt=sniff(iface="veth0", filter="icmp6", count=1) pkt = pkt[0] b = bytearray(pkt[Raw].load) b[1] += 1 b += b'\xde\xad\xbe\xef\xde\xad\xbe\xef' pkt[Raw].load = bytes(b) pkt[IPv6].plen += 8 # fixup checksum after modifying the payload pkt[IPv6].payload.cksum -= 0x3b44 if pkt[IPv6].payload.cksum < 0: pkt[IPv6].payload.cksum += 0xffff sendp(pkt, iface="veth0") This should result in DAD failure for any address added to veth0's peer, but is currently ignored. Fixes: adc176c54722 ("ipv6 addrconf: Implemented enhanced DAD (RFC7527)") Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Stefano Brivio <sbrivio@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-04vrf: check the original netdevice for generating redirectStephen Suryaputra
Use the right device to determine if redirect should be sent especially when using vrf. Same as well as when sending the redirect. Signed-off-by: Stephen Suryaputra <ssuryaextr@gmail.com> Acked-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-19net/ipv6: Rename fib6_info struct elementsDavid Ahern
Change the prefix for fib6_info struct elements from rt6i_ to fib6_. rt6i_pcpu and rt6i_exception_bucket are left as is given that they point to rt6_info entries. Rename only; not functional change intended. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-17net/ipv6: Flip FIB entries to fib6_infoDavid Ahern
Convert all code paths referencing a FIB entry from rt6_info to fib6_info. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-17net/ipv6: separate handling of FIB entries from dst based routesDavid Ahern
Last step before flipping the data type for FIB entries: - use fib6_info_alloc to create FIB entries in ip6_route_info_create and addrconf_dst_alloc - use fib6_info_release in place of dst_release, ip6_rt_put and rt6_release - remove the dst_hold before calling __ip6_ins_rt or ip6_del_rt - when purging routes, drop per-cpu routes - replace inc and dec of rt6i_ref with fib6_info_hold and fib6_info_release - use rt->from since it points to the FIB entry - drop references to exception bucket, fib6_metrics and per-cpu from dst entries (those are relevant for fib entries only) Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-17net/ipv6: Create a neigh_lookup for FIB entriesDavid Ahern
The router discovery code has a FIB entry and wants to validate the gateway has a neighbor entry. Refactor the existing dst_neigh_lookup for IPv6 and create a new function that takes the gateway and device and returns a neighbor entry. Use the new function in ndisc_router_discovery to validate the gateway. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-17net/ipv6: move expires into rt6_infoDavid Ahern
Add expires to rt6_info for FIB entries, and add fib6 helpers to manage it. Data path use of dst.expires remains. The transition is fairly straightforward: when working with fib entries, rt->dst.expires is just rt->expires, rt6_clean_expires is replaced with fib6_clean_expires, rt6_set_expires becomes fib6_set_expires, and rt6_check_expired becomes fib6_check_expired, where the fib6 versions are added by this patch. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-17net/ipv6: move metrics from dst to rt6_infoDavid Ahern
Similar to IPv4, add fib metrics to the fib struct, which at the moment is rt6_info. Will be moved to fib6_info in a later patch. Copy metrics into dst by reference using refcount. To make the transition: - add dst_metrics to rt6_info. Default to dst_default_metrics if no metrics are passed during route add. No need for a separate pmtu entry; it can reference the MTU slot in fib6_metrics - ip6_convert_metrics allocates memory in the FIB entry and uses ip_metrics_convert to copy from netlink attribute to metrics entry - the convert metrics call is done in ip6_route_info_create simplifying the route add path + fib6_commit_metrics and fib6_copy_metrics and the temporary mx6_config are no longer needed - add fib6_metric_set helper to change the value of a metric in the fib entry since dst_metric_set can no longer be used - cow_metrics for IPv6 can drop to dst_cow_metrics_generic - rt6_dst_from_metrics_check is no longer needed - rt6_fill_node needs the FIB entry and dst as separate arguments to keep compatibility with existing output. Current dst address is renamed to dest. (to be consistent with IPv4 rt6_fill_node really should be split into 2 functions similar to fib_dump_info and rt_fill_info) - rt6_fill_node no longer needs the temporary metrics variable Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-17net/ipv6: Pass net namespace to route functionsDavid Ahern
Pass network namespace reference into route add, delete and get functions. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-27net: Drop pernet_operations::asyncKirill Tkhai
Synchronous pernet_operations are not allowed anymore. All are asynchronous. So, drop the structure member. Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Fun set of conflict resolutions here... For the mac80211 stuff, these were fortunately just parallel adds. Trivially resolved. In drivers/net/phy/phy.c we had a bug fix in 'net' that moved the function phy_disable_interrupts() earlier in the file, whilst in 'net-next' the phy_error() call from this function was removed. In net/ipv4/xfrm4_policy.c, David Ahern's changes to remove the 'rt_table_id' member of rtable collided with a bug fix in 'net' that added a new struct member "rt_mtu_locked" which needs to be copied over here. The mlxsw driver conflict consisted of net-next separating the span code and definitions into separate files, whilst a 'net' bug fix made some changes to that moved code. The mlx5 infiniband conflict resolution was quite non-trivial, the RDMA tree's merge commit was used as a guide here, and here are their notes: ==================== Due to bug fixes found by the syzkaller bot and taken into the for-rc branch after development for the 4.17 merge window had already started being taken into the for-next branch, there were fairly non-trivial merge issues that would need to be resolved between the for-rc branch and the for-next branch. This merge resolves those conflicts and provides a unified base upon which ongoing development for 4.17 can be based. Conflicts: drivers/infiniband/hw/mlx5/main.c - Commit 42cea83f9524 (IB/mlx5: Fix cleanup order on unload) added to for-rc and commit b5ca15ad7e61 (IB/mlx5: Add proper representors support) add as part of the devel cycle both needed to modify the init/de-init functions used by mlx5. To support the new representors, the new functions added by the cleanup patch needed to be made non-static, and the init/de-init list added by the representors patch needed to be modified to match the init/de-init list changes made by the cleanup patch. Updates: drivers/infiniband/hw/mlx5/mlx5_ib.h - Update function prototypes added by representors patch to reflect new function names as changed by cleanup patch drivers/infiniband/hw/mlx5/ib_rep.c - Update init/de-init stage list to match new order from cleanup patch ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-16net/ipv6: Change address check to always take a device argumentDavid Ahern
ipv6_chk_addr_and_flags determines if an address is a local address and optionally if it is an address on a specific device. For example, it is called by ip6_route_info_create to determine if a given gateway address is a local address. The address check currently does not consider L3 domains and as a result does not allow a route to be added in one VRF if the nexthop points to an address in a second VRF. e.g., $ ip route add 2001:db8:1::/64 vrf r2 via 2001:db8:102::23 Error: Invalid gateway address. where 2001:db8:102::23 is an address on an interface in vrf r1. ipv6_chk_addr_and_flags needs to allow callers to always pass in a device with a separate argument to not limit the address to the specific device. The device is used used to determine the L3 domain of interest. To that end add an argument to skip the device check and update callers to always pass a device where possible and use the new argument to mean any address in the domain. Update a handful of users of ipv6_chk_addr with a NULL dev argument. This patch handles the change to these callers without adding the domain check. ip6_validate_gw needs to handle 2 cases - one where the device is given as part of the nexthop spec and the other where the device is resolved. There is at least 1 VRF case where deferring the check to only after the route lookup has resolved the device fails with an unintuitive error "RTNETLINK answers: No route to host" as opposed to the preferred "Error: Gateway can not be a local address." The 'no route to host' error is because of the fallback to a full lookup. The check is done twice to avoid this error. Signed-off-by: David Ahern <dsahern@gmail.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-09ipv6: fix access to non-linear packet in ndisc_fill_redirect_hdr_option()Lorenzo Bianconi
Fix the following slab-out-of-bounds kasan report in ndisc_fill_redirect_hdr_option when the incoming ipv6 packet is not linear and the accessed data are not in the linear data region of orig_skb. [ 1503.122508] ================================================================== [ 1503.122832] BUG: KASAN: slab-out-of-bounds in ndisc_send_redirect+0x94e/0x990 [ 1503.123036] Read of size 1184 at addr ffff8800298ab6b0 by task netperf/1932 [ 1503.123220] CPU: 0 PID: 1932 Comm: netperf Not tainted 4.16.0-rc2+ #124 [ 1503.123347] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.10.2-2.fc27 04/01/2014 [ 1503.123527] Call Trace: [ 1503.123579] <IRQ> [ 1503.123638] print_address_description+0x6e/0x280 [ 1503.123849] kasan_report+0x233/0x350 [ 1503.123946] memcpy+0x1f/0x50 [ 1503.124037] ndisc_send_redirect+0x94e/0x990 [ 1503.125150] ip6_forward+0x1242/0x13b0 [...] [ 1503.153890] Allocated by task 1932: [ 1503.153982] kasan_kmalloc+0x9f/0xd0 [ 1503.154074] __kmalloc_track_caller+0xb5/0x160 [ 1503.154198] __kmalloc_reserve.isra.41+0x24/0x70 [ 1503.154324] __alloc_skb+0x130/0x3e0 [ 1503.154415] sctp_packet_transmit+0x21a/0x1810 [ 1503.154533] sctp_outq_flush+0xc14/0x1db0 [ 1503.154624] sctp_do_sm+0x34e/0x2740 [ 1503.154715] sctp_primitive_SEND+0x57/0x70 [ 1503.154807] sctp_sendmsg+0xaa6/0x1b10 [ 1503.154897] sock_sendmsg+0x68/0x80 [ 1503.154987] ___sys_sendmsg+0x431/0x4b0 [ 1503.155078] __sys_sendmsg+0xa4/0x130 [ 1503.155168] do_syscall_64+0x171/0x3f0 [ 1503.155259] entry_SYSCALL_64_after_hwframe+0x42/0xb7 [ 1503.155436] Freed by task 1932: [ 1503.155527] __kasan_slab_free+0x134/0x180 [ 1503.155618] kfree+0xbc/0x180 [ 1503.155709] skb_release_data+0x27f/0x2c0 [ 1503.155800] consume_skb+0x94/0xe0 [ 1503.155889] sctp_chunk_put+0x1aa/0x1f0 [ 1503.155979] sctp_inq_pop+0x2f8/0x6e0 [ 1503.156070] sctp_assoc_bh_rcv+0x6a/0x230 [ 1503.156164] sctp_inq_push+0x117/0x150 [ 1503.156255] sctp_backlog_rcv+0xdf/0x4a0 [ 1503.156346] __release_sock+0x142/0x250 [ 1503.156436] release_sock+0x80/0x180 [ 1503.156526] sctp_sendmsg+0xbb0/0x1b10 [ 1503.156617] sock_sendmsg+0x68/0x80 [ 1503.156708] ___sys_sendmsg+0x431/0x4b0 [ 1503.156799] __sys_sendmsg+0xa4/0x130 [ 1503.156889] do_syscall_64+0x171/0x3f0 [ 1503.156980] entry_SYSCALL_64_after_hwframe+0x42/0xb7 [ 1503.157158] The buggy address belongs to the object at ffff8800298ab600 which belongs to the cache kmalloc-1024 of size 1024 [ 1503.157444] The buggy address is located 176 bytes inside of 1024-byte region [ffff8800298ab600, ffff8800298aba00) [ 1503.157702] The buggy address belongs to the page: [ 1503.157820] page:ffffea0000a62a00 count:1 mapcount:0 mapping:0000000000000000 index:0x0 compound_mapcount: 0 [ 1503.158053] flags: 0x4000000000008100(slab|head) [ 1503.158171] raw: 4000000000008100 0000000000000000 0000000000000000 00000001800e000e [ 1503.158350] raw: dead000000000100 dead000000000200 ffff880036002600 0000000000000000 [ 1503.158523] page dumped because: kasan: bad access detected [ 1503.158698] Memory state around the buggy address: [ 1503.158816] ffff8800298ab900: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 1503.158988] ffff8800298ab980: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 1503.159165] >ffff8800298aba00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 1503.159338] ^ [ 1503.159436] ffff8800298aba80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 1503.159610] ffff8800298abb00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 1503.159785] ================================================================== [ 1503.159964] Disabling lock debugging due to kernel taint The test scenario to trigger the issue consists of 4 devices: - H0: data sender, connected to LAN0 - H1: data receiver, connected to LAN1 - GW0 and GW1: routers between LAN0 and LAN1. Both of them have an ethernet connection on LAN0 and LAN1 On H{0,1} set GW0 as default gateway while on GW0 set GW1 as next hop for data from LAN0 to LAN1. Moreover create an ip6ip6 tunnel between H0 and H1 and send 3 concurrent data streams (TCP/UDP/SCTP) from H0 to H1 through ip6ip6 tunnel (send buffer size is set to 16K). While data streams are active flush the route cache on HA multiple times. I have not been able to identify a given commit that introduced the issue since, using the reproducer described above, the kasan report has been triggered from 4.14 and I have not gone back further. Reported-by: Jianlin Shi <jishi@redhat.com> Reviewed-by: Stefano Brivio <sbrivio@redhat.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-07ipv6: ndisc: use true and false for boolean valuesGustavo A. R. Silva
Assign true or false to boolean variables instead of an integer value. This issue was detected with the help of Coccinelle. Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-19net: Convert icmpv6_sk_ops, ndisc_net_ops and igmp6_net_opsKirill Tkhai
These pernet_operations create and destroy net::ipv6.icmp_sk socket, used to send ICMP or error reply. Nobody can dereference the socket to handle a packet before net is initialized, as there is no routing; nobody can do that in parallel with exit, as all of devices are moved to init_net or destroyed and there are no packets it-flight. So, it's possible to mark these pernet_operations as async. The same for ndisc_net_ops and for igmp6_net_ops. The last one also creates and destroys /proc entries. Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-29net: ipv6: send unsolicited NA after DADDavid Ahern
Unsolicited IPv6 neighbor advertisements should be sent after DAD completes. Update ndisc_send_unsol_na to skip tentative, non-optimistic addresses and have those sent by addrconf_dad_completed after DAD. Fixes: 4a6e3c5def13c ("net: ipv6: send unsolicited NA on admin up") Reported-by: Vivek Venkatraman <vivek@cumulusnetworks.com> Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-11net: ipv6: sysctl to specify IPv6 ND traffic classMaciej Żenczykowski
Add a per-device sysctl to specify the default traffic class to use for kernel originated IPv6 Neighbour Discovery packets. Currently this includes: - Router Solicitation (ICMPv6 type 133) ndisc_send_rs() -> ndisc_send_skb() -> ip6_nd_hdr() - Neighbour Solicitation (ICMPv6 type 135) ndisc_send_ns() -> ndisc_send_skb() -> ip6_nd_hdr() - Neighbour Advertisement (ICMPv6 type 136) ndisc_send_na() -> ndisc_send_skb() -> ip6_nd_hdr() - Redirect (ICMPv6 type 137) ndisc_send_redirect() -> ndisc_send_skb() -> ip6_nd_hdr() and if the kernel ever gets around to generating RA's, it would presumably also include: - Router Advertisement (ICMPv6 type 134) (radvd daemon could pick up on the kernel setting and use it) Interface drivers may examine the Traffic Class value and translate the DiffServ Code Point into a link-layer appropriate traffic prioritization scheme. An example of mapping IETF DSCP values to IEEE 802.11 User Priority values can be found here: https://tools.ietf.org/html/draft-ietf-tsvwg-ieee-802-11 The expected primary use case is to properly prioritize ND over wifi. Testing: jzem22:~# cat /proc/sys/net/ipv6/conf/eth0/ndisc_tclass 0 jzem22:~# echo -1 > /proc/sys/net/ipv6/conf/eth0/ndisc_tclass -bash: echo: write error: Invalid argument jzem22:~# echo 256 > /proc/sys/net/ipv6/conf/eth0/ndisc_tclass -bash: echo: write error: Invalid argument jzem22:~# echo 0 > /proc/sys/net/ipv6/conf/eth0/ndisc_tclass jzem22:~# echo 255 > /proc/sys/net/ipv6/conf/eth0/ndisc_tclass jzem22:~# cat /proc/sys/net/ipv6/conf/eth0/ndisc_tclass 255 jzem22:~# echo 34 > /proc/sys/net/ipv6/conf/eth0/ndisc_tclass jzem22:~# cat /proc/sys/net/ipv6/conf/eth0/ndisc_tclass 34 jzem22:~# echo $[0xDC] > /proc/sys/net/ipv6/conf/eth0/ndisc_tclass jzem22:~# tcpdump -v -i eth0 icmp6 and src host jzem22.pgc and dst host fe80::1 tcpdump: listening on eth0, link-type EN10MB (Ethernet), capture size 262144 bytes IP6 (class 0xdc, hlim 255, next-header ICMPv6 (58) payload length: 24) jzem22.pgc > fe80::1: [icmp6 sum ok] ICMP6, neighbor advertisement, length 24, tgt is jzem22.pgc, Flags [solicited] (based on original change written by Erik Kline, with minor changes) v2: fix 'suspicious rcu_dereference_check() usage' by explicitly grabbing the rcu_read_lock. Cc: Lorenzo Colitti <lorenzo@google.com> Signed-off-by: Erik Kline <ek@google.com> Signed-off-by: Maciej Żenczykowski <maze@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-01net: display hw address of source machine during ipv6 DAD failureVishwanath Pai
This patch updates the error messages displayed in kernel log to include hwaddress of the source machine that caused ipv6 duplicate address detection failures. Examples: a) When we receive a NA packet from another machine advertising our address: ICMPv6: NA: 34:ab:cd:56:11:e8 advertised our address 2001:db8:: on eth0! b) When we detect DAD failure during address assignment to an interface: IPv6: eth0: IPv6 duplicate address 2001:db8:: used by 34:ab:cd:56:11:e8 detected! v2: Changed %pI6 to %pI6c in ndisc_recv_na() Chaged the v6 address in the commit message to 2001:db8:: Suggested-by: Igor Lubashev <ilubashe@akamai.com> Signed-off-by: Vishwanath Pai <vpai@akamai.com> Acked-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-29neigh: increase queue_len_bytes to match wmem_defaultEric Dumazet
Florian reported UDP xmit drops that could be root caused to the too small neigh limit. Current limit is 64 KB, meaning that even a single UDP socket would hit it, since its default sk_sndbuf comes from net.core.wmem_default (~212992 bytes on 64bit arches). Once ARP/ND resolution is in progress, we should allow a little more packets to be queued, at least for one producer. Once neigh arp_queue is filled, a rogue socket should hit its sk_sndbuf limit and either block in sendmsg() or return -EAGAIN. Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-09net: ipv6: lower ndisc notifier priority below addrconfDavid Ahern
ndisc_notify is used to send unsolicited neighbor advertisements (e.g., on a link up). Currently, the ndisc notifier is run before the addrconf notifer which means NA's are not sent for link-local addresses which are added by the addrconf notifier. Fix by lowering the priority of the ndisc notifier. Setting the priority to ADDRCONF_NOTIFY_PRIORITY - 5 means it runs after addrconf and before the route notifier which is ADDRCONF_NOTIFY_PRIORITY - 10. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-16networking: make skb_put & friends return void pointersJohannes Berg
It seems like a historic accident that these return unsigned char *, and in many places that means casts are required, more often than not. Make these functions (skb_put, __skb_put and pskb_put) return void * and remove all the casts across the tree, adding a (u8 *) cast only where the unsigned char pointer was used directly, all done with the following spatch: @@ expression SKB, LEN; typedef u8; identifier fn = { skb_put, __skb_put }; @@ - *(fn(SKB, LEN)) + *(u8 *)fn(SKB, LEN) @@ expression E, SKB, LEN; identifier fn = { skb_put, __skb_put }; type T; @@ - E = ((T *)(fn(SKB, LEN))) + E = fn(SKB, LEN) which actually doesn't cover pskb_put since there are only three users overall. A handful of stragglers were converted manually, notably a macro in drivers/isdn/i4l/isdn_bsdcomp.c and, oddly enough, one of the many instances in net/bluetooth/hci_sock.c. In the former file, I also had to fix one whitespace problem spatch introduced. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-26Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-24net: ipv6: send unsolicited NA if enabled for all interfacesDavid Ahern
When arp_notify is set to 1 for either a specific interface or for 'all' interfaces, gratuitous arp requests are sent. Since ndisc_notify is the ipv6 equivalent to arp_notify, it should follow the same semantics. Commit 4a6e3c5def13 ("net: ipv6: send unsolicited NA on admin up") sends the NA on admin up. The final piece is checking devconf_all->ndisc_notify in addition to the per device setting. Add it. Fixes: 5cb04436eef6 ("ipv6: add knob to send unsolicited ND on link-layer address change") Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-17net: ipv6: send unsolicited NA on admin upDavid Ahern
ndisc_notify is the ipv6 equivalent to arp_notify. When arp_notify is set to 1, gratuitous arp requests are sent when the device is brought up. The same is expected when ndisc_notify is set to 1 (per ndisc_notify in Documentation/networking/ip-sysctl.txt). The NA is not sent on NETDEV_UP event; add it. Fixes: 5cb04436eef6 ("ipv6: add knob to send unsolicited ND on link-layer address change") Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-22net: ipv6: Add sysctl for minimum prefix len acceptable in RIOs.Joel Scherpelz
This commit adds a new sysctl accept_ra_rt_info_min_plen that defines the minimum acceptable prefix length of Route Information Options. The new sysctl is intended to be used together with accept_ra_rt_info_max_plen to configure a range of acceptable prefix lengths. It is useful to prevent misconfigurations from unintentionally blackholing too much of the IPv6 address space (e.g., home routers announcing RIOs for fc00::/7, which is incorrect). Signed-off-by: Joel Scherpelz <jscherpelz@google.com> Acked-by: Lorenzo Colitti <lorenzo@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-22neighbour: fix nlmsg_pid in notificationsRoopa Prabhu
neigh notifications today carry pid 0 for nlmsg_pid in all cases. This patch fixes it to carry calling process pid when available. Applications (eg. quagga) rely on nlmsg_pid to ignore notifications generated by their own netlink operations. This patch follows the routing subsystem which already sets this correctly. Reported-by: Vivek Venkatraman <vivek@cumulusnetworks.com> Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-03ipv6 addrconf: Implemented enhanced DAD (RFC7527)Erik Nordmark
Implemented RFC7527 Enhanced DAD. IPv6 duplicate address detection can fail if there is some temporary loopback of Ethernet frames. RFC7527 solves this by including a random nonce in the NS messages used for DAD, and if an NS is received with the same nonce it is assumed to be a looped back DAD probe and is ignored. RFC7527 is enabled by default. Can be disabled by setting both of conf/{all,interface}/enhanced_dad to zero. Signed-off-by: Erik Nordmark <nordmark@arista.com> Signed-off-by: Bob Gilligan <gilligan@arista.com> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-10net: l3mdev: remove redundant callsDavid Ahern
A previous patch added l3mdev flow update making these hooks redundant. Remove them. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-15ipv6: export several functionsAlexander Aring
This patch exports some neighbour discovery functions which can be used by 6lowpan neighbour discovery ops functionality then. Cc: David S. Miller <davem@davemloft.net> Cc: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru> Cc: James Morris <jmorris@namei.org> Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org> Cc: Patrick McHardy <kaber@trash.net> Acked-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Reviewed-by: Stefan Schmidt <stefan@osg.samsung.com> Signed-off-by: Alexander Aring <aar@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-15ipv6: introduce neighbour discovery opsAlexander Aring
This patch introduces neighbour discovery ops callback structure. The idea is to separate the handling for 6LoWPAN into the 6lowpan module. These callback offers 6lowpan different handling, such as 802.15.4 short address handling or RFC6775 (Neighbor Discovery Optimization for IPv6 over 6LoWPANs). Cc: David S. Miller <davem@davemloft.net> Cc: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru> Cc: James Morris <jmorris@namei.org> Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org> Cc: Patrick McHardy <kaber@trash.net> Acked-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: Alexander Aring <aar@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-15ndisc: add __ndisc_fill_addr_option functionAlexander Aring
This patch adds __ndisc_fill_addr_option as low-level function for ndisc_fill_addr_option which doesn't depend on net_device parameter. Cc: David S. Miller <davem@davemloft.net> Cc: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru> Cc: James Morris <jmorris@namei.org> Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org> Cc: Patrick McHardy <kaber@trash.net> Acked-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Reviewed-by: Stefan Schmidt <stefan@osg.samsung.com> Signed-off-by: Alexander Aring <aar@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-11ipv6: add option to drop unsolicited neighbor advertisementsJohannes Berg
In certain 802.11 wireless deployments, there will be NA proxies that use knowledge of the network to correctly answer requests. To prevent unsolicitd advertisements on the shared medium from being a problem, on such deployments wireless needs to drop them. Enable this by providing an option called "drop_unsolicited_na". Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-23ipv6: honor ifindex in case we receive ll addresses in router advertisementsHannes Frederic Sowa
Marc Haber reported we don't honor interface indexes when we receive link local router addresses in router advertisements. Luckily the non-strict version of ipv6_chk_addr already does the correct job here, so we can simply use it to lighten the checks and use those addresses by default without any configuration change. Link: <http://permalink.gmane.org/gmane.linux.network/391348> Reported-by: Marc Haber <mh+netdev@zugschlus.de> Cc: Marc Haber <mh+netdev@zugschlus.de> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-01Revert "ipv6: ndisc: inherit metadata dst when creating ndisc requests"Nicolas Dichtel
This reverts commit ab450605b35caa768ca33e86db9403229bf42be4. In IPv6, we cannot inherit the dst of the original dst. ndisc packets are IPv6 packets and may take another route than the original packet. This patch breaks the following scenario: a packet comes from eth0 and is forwarded through vxlan1. The encapsulated packet triggers an NS which cannot be sent because of the wrong route. CC: Jiri Benc <jbenc@redhat.com> CC: Thomas Graf <tgraf@suug.ch> Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-13net: Add VRF support to IPv6 stackDavid Ahern
As with IPv4 support for VRFs added to IPv6 stack by replacing hardcoded table ids with possibly device specific ones and manipulating the oif in the flowi6. The flow flags are used to skip oif compare in nexthop lookups if the device is enslaved to a VRF via the L3 master device. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-13net: Export fib6_get_table and nd_tblDavid Ahern
Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-08net: Pass net into dst_output and remove dst_output_okfnEric W. Biederman
Replace dst_output_okfn with dst_output Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-24ipv6: remove unused neigh parameter from ndisc functionsJiri Benc
Since commit 12fd84f4383b1 ("ipv6: Remove unused neigh argument for icmp6_dst_alloc() and its callers."), the neigh parameter of ndisc_send_na and ndisc_send_ns is unused. CC: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: Jiri Benc <jbenc@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-17netfilter: Pass net into okfnEric W. Biederman
This is immediately motivated by the bridge code that chains functions that call into netfilter. Without passing net into the okfns the bridge code would need to guess about the best expression for the network namespace to process packets in. As net is frequently one of the first things computed in continuation functions after netfilter has done it's job passing in the desired network namespace is in many cases a code simplification. To support this change the function dst_output_okfn is introduced to simplify passing dst_output as an okfn. For the moment dst_output_okfn just silently drops the struct net. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-17netfilter: Pass struct net into the netfilter hooksEric W. Biederman
Pass a network namespace parameter into the netfilter hooks. At the call site of the netfilter hooks the path a packet is taking through the network stack is well known which allows the network namespace to be easily and reliabily. This allows the replacement of magic code like "dev_net(state->in?:state->out)" that appears at the start of most netfilter hooks with "state->net". In almost all cases the network namespace passed in is derived from the first network device passed in, guaranteeing those paths will not see any changes in practice. The exceptions are: xfrm/xfrm_output.c:xfrm_output_resume() xs_net(skb_dst(skb)->xfrm) ipvs/ip_vs_xmit.c:ip_vs_nat_send_or_cont() ip_vs_conn_net(cp) ipvs/ip_vs_xmit.c:ip_vs_send_or_cont() ip_vs_conn_net(cp) ipv4/raw.c:raw_send_hdrinc() sock_net(sk) ipv6/ip6_output.c:ip6_xmit() sock_net(sk) ipv6/ndisc.c:ndisc_send_skb() dev_net(skb->dev) not dev_net(dst->dev) ipv6/raw.c:raw6_send_hdrinc() sock_net(sk) br_netfilter_hooks.c:br_nf_pre_routing_finish() dev_net(skb->dev) before skb->dev is set to nf_bridge->physindev In all cases these exceptions seem to be a better expression for the network namespace the packet is being processed in then the historic "dev_net(in?in:out)". I am documenting them in case something odd pops up and someone starts trying to track down what happened. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-17net: Merge dst_output and dst_output_skEric W. Biederman
Add a sock paramter to dst_output making dst_output_sk superfluous. Add a skb->sk parameter to all of the callers of dst_output Have the callers of dst_output_sk call dst_output. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-08 11:34:31 +0000