summaryrefslogtreecommitdiff
path: root/net/ipv4/fib_semantics.c
AgeCommit message (Collapse)Author
2016-09-12Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts: drivers/net/ethernet/mediatek/mtk_eth_soc.c drivers/net/ethernet/qlogic/qed/qed_dcbx.c drivers/net/phy/Kconfig All conflicts were cases of overlapping commits. Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-06net: Don't delete routes in different VRFsMark Tomlinson
When deleting an IP address from an interface, there is a clean-up of routes which refer to this local address. However, there was no check to see that the VRF matched. This meant that deletion wasn't confined to the VRF it should have been. To solve this, a new field has been added to fib_info to hold a table id. When removing fib entries corresponding to a local ip address, this table id is also used in the comparison. The table id is populated when the fib_info is created. This was already done in some places, but not in ip_rt_ioctl(). This has now been fixed. Fixes: 021dd3b8a142 ("net: Add routes to the table associated with the device") Acked-by: David Ahern <dsa@cumulusnetworks.com> Tested-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: Mark Tomlinson <mark.tomlinson@alliedtelesis.co.nz> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-19net: ipv4: fix sparse error in fib_good_nh()Eric Dumazet
Fixes following sparse errors : net/ipv4/fib_semantics.c:1579:61: warning: incorrect type in argument 2 (different base types) net/ipv4/fib_semantics.c:1579:61: expected unsigned int [unsigned] [usertype] key net/ipv4/fib_semantics.c:1579:61: got restricted __be32 const [usertype] nh_gw Fixes: a6db4494d218c ("net: ipv4: Consider failed nexthops in multipath routes") Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-11ipv4: reject RTNH_F_DEAD and RTNH_F_LINKDOWN from user spaceJulian Anastasov
Vegard Nossum is reporting for a crash in fib_dump_info when nh_dev = NULL and fib_nhs == 1: Pid: 50, comm: netlink.exe Not tainted 4.7.0-rc5+ RIP: 0033:[<00000000602b3d18>] RSP: 0000000062623890 EFLAGS: 00010202 RAX: 0000000000000000 RBX: 000000006261b800 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000024 RDI: 000000006245ba00 RBP: 00000000626238f0 R08: 000000000000029c R09: 0000000000000000 R10: 0000000062468038 R11: 000000006245ba00 R12: 000000006245ba00 R13: 00000000625f96c0 R14: 00000000601e16f0 R15: 0000000000000000 Kernel panic - not syncing: Kernel mode fault at addr 0x2e0, ip 0x602b3d18 CPU: 0 PID: 50 Comm: netlink.exe Not tainted 4.7.0-rc5+ #581 Stack: 626238f0 960226a02 00000400 000000fe 62623910 600afca7 62623970 62623a48 62468038 00000018 00000000 00000000 Call Trace: [<602b3e93>] rtmsg_fib+0xd3/0x190 [<602b6680>] fib_table_insert+0x260/0x500 [<602b0e5d>] inet_rtm_newroute+0x4d/0x60 [<60250def>] rtnetlink_rcv_msg+0x8f/0x270 [<60267079>] netlink_rcv_skb+0xc9/0xe0 [<60250d4b>] rtnetlink_rcv+0x3b/0x50 [<60265400>] netlink_unicast+0x1a0/0x2c0 [<60265e47>] netlink_sendmsg+0x3f7/0x470 [<6021dc9a>] sock_sendmsg+0x3a/0x90 [<6021e0d0>] ___sys_sendmsg+0x300/0x360 [<6021fa64>] __sys_sendmsg+0x54/0xa0 [<6021fac0>] SyS_sendmsg+0x10/0x20 [<6001ea68>] handle_syscall+0x88/0x90 [<600295fd>] userspace+0x3fd/0x500 [<6001ac55>] fork_handler+0x85/0x90 $ addr2line -e vmlinux -i 0x602b3d18 include/linux/inetdevice.h:222 net/ipv4/fib_semantics.c:1264 Problem happens when RTNH_F_LINKDOWN is provided from user space when creating routes that do not use the flag, catched with netlink fuzzer. Currently, the kernel allows user space to set both flags to nh_flags and fib_flags but this is not intentional, the assumption was that they are not set. Fix this by rejecting both flags with EINVAL. Reported-by: Vegard Nossum <vegard.nossum@oracle.com> Fixes: 0eeb075fad73 ("net: ipv4 sysctl option to ignore routes when nexthop link is down") Signed-off-by: Julian Anastasov <ja@ssi.bg> Cc: Andy Gospodarek <gospo@cumulusnetworks.com> Cc: Dinesh Dutt <ddutt@cumulusnetworks.com> Cc: Scott Feldman <sfeldma@gmail.com> Reviewed-by: Andy Gospodarek <gospo@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
The nf_conntrack_core.c fix in 'net' is not relevant in 'net-next' because we no longer have a per-netns conntrack hash. The ip_gre.c conflict as well as the iwlwifi ones were cases of overlapping changes. Conflicts: drivers/net/wireless/intel/iwlwifi/mvm/tx.c net/ipv4/ip_gre.c net/netfilter/nf_conntrack_core.c Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-14net/route: enforce hoplimit max valuePaolo Abeni
Currently, when creating or updating a route, no check is performed in both ipv4 and ipv6 code to the hoplimit value. The caller can i.e. set hoplimit to 256, and when such route will be used, packets will be sent with hoplimit/ttl equal to 0. This commit adds checks for the RTAX_HOPLIMIT value, in both ipv4 ipv6 route code, substituting any value greater than 255 with 255. This is consistent with what is currently done for ADVMSS and MTU in the ipv4 code. Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-11net: ipv4: Consider failed nexthops in multipath routesDavid Ahern
Multipath route lookups should consider knowledge about next hops and not select a hop that is known to be failed. Example: [h2] [h3] 15.0.0.5 | | 3| 3| [SP1] [SP2]--+ 1 2 1 2 | | /-------------+ | | \ / | | X | | / \ | | / \---------------\ | 1 2 1 2 12.0.0.2 [TOR1] 3-----------------3 [TOR2] 12.0.0.3 4 4 \ / \ / \ / -------| |-----/ 1 2 [TOR3] 3| | [h1] 12.0.0.1 host h1 with IP 12.0.0.1 has 2 paths to host h3 at 15.0.0.5: root@h1:~# ip ro ls ... 12.0.0.0/24 dev swp1 proto kernel scope link src 12.0.0.1 15.0.0.0/16 nexthop via 12.0.0.2 dev swp1 weight 1 nexthop via 12.0.0.3 dev swp1 weight 1 ... If the link between tor3 and tor1 is down and the link between tor1 and tor2 then tor1 is effectively cut-off from h1. Yet the route lookups in h1 are alternating between the 2 routes: ping 15.0.0.5 gets one and ssh 15.0.0.5 gets the other. Connections that attempt to use the 12.0.0.2 nexthop fail since that neighbor is not reachable: root@h1:~# ip neigh show ... 12.0.0.3 dev swp1 lladdr 00:02:00:00:00:1b REACHABLE 12.0.0.2 dev swp1 FAILED ... The failed path can be avoided by considering known neighbor information when selecting next hops. If the neighbor lookup fails we have no knowledge about the nexthop, so give it a shot. If there is an entry then only select the nexthop if the state is sane. This is similar to what fib_detect_death does. To maintain backward compatibility use of the neighbor information is based on a new sysctl, fib_multipath_use_neigh. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Reviewed-by: Julian Anastasov <ja@ssi.bg> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-04net: Fix prefsrc lookupsDavid Ahern
A bug report (https://bugzilla.kernel.org/show_bug.cgi?id=107071) noted that the follwoing ip command is failing with v4.3: $ ip route add 10.248.5.0/24 dev bond0.250 table vlan_250 src 10.248.5.154 RTNETLINK answers: Invalid argument 021dd3b8a142d changed the lookup of the given preferred source address to use the table id passed in, but this assumes the local entries are in the given table which is not necessarily true for non-VRF use cases. When validating the preferred source fallback to the local table on failure. Fixes: 021dd3b8a142d ("net: Add routes to the table associated with the device") Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Minor overlapping changes in net/ipv4/ipmr.c, in 'net' we were fixing the "BH-ness" of the counter bumps whilst in 'net-next' the functions were modified to take an explicit 'net' parameter. Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-02ipv4: use l4 hash for locally generated multipath flowsPaolo Abeni
This patch changes how the multipath hash is computed for locally generated flows: now the hash comprises l4 information. This allows better utilization of the available paths when the existing flows have the same source IP and the same destination IP: with l3 hash, even when multiple connections are in place simultaneously, a single path will be used, while with l4 hash we can use all the available paths. v2 changes: - use get_hash_from_flowi4() instead of implementing just another l4 hash function Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-01ipv4: update RTNH_F_LINKDOWN flag on UP eventJulian Anastasov
When nexthop is part of multipath route we should clear the LINKDOWN flag when link goes UP or when first address is added. This is needed because we always set LINKDOWN flag when DEAD flag was set but now on UP the nexthop is not dead anymore. Examples when LINKDOWN bit can be forgotten when no NETDEV_CHANGE is delivered: - link goes down (LINKDOWN is set), then link goes UP and device shows carrier OK but LINKDOWN remains set - last address is deleted (LINKDOWN is set), then address is added and device shows carrier OK but LINKDOWN remains set Steps to reproduce: modprobe dummy ifconfig dummy0 192.168.168.1 up here add a multipath route where one nexthop is for dummy0: ip route add 1.2.3.4 nexthop dummy0 nexthop SOME_OTHER_DEVICE ifconfig dummy0 down ifconfig dummy0 up now ip route shows nexthop that is not dead. Now set the sysctl var: echo 1 > /proc/sys/net/ipv4/conf/dummy0/ignore_routes_with_linkdown now ip route will show a dead nexthop because the forgotten RTNH_F_LINKDOWN is propagated as RTNH_F_DEAD. Fixes: 8a3d03166f19 ("net: track link-status of ipv4 nexthops") Signed-off-by: Julian Anastasov <ja@ssi.bg> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-01ipv4: fix to not remove local route on link downJulian Anastasov
When fib_netdev_event calls fib_disable_ip on NETDEV_DOWN event we should not delete the local routes if the local address is still present. The confusion comes from the fact that both fib_netdev_event and fib_inetaddr_event use the NETDEV_DOWN constant. Fix it by returning back the variable 'force'. Steps to reproduce: modprobe dummy ifconfig dummy0 192.168.168.1 up ifconfig dummy0 down ip route list table local | grep dummy | grep host local 192.168.168.1 dev dummy0 proto kernel scope host src 192.168.168.1 Fixes: 8a3d03166f19 ("net: track link-status of ipv4 nexthops") Signed-off-by: Julian Anastasov <ja@ssi.bg> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-16net: Fix suspicious RCU usage in fib_rebalanceDavid Ahern
This command: ip route add 192.168.1.0/24 nexthop via 10.2.1.5 dev eth1 nexthop via 10.2.2.5 dev eth2 generated this suspicious RCU usage message: [ 63.249262] [ 63.249939] =============================== [ 63.251571] [ INFO: suspicious RCU usage. ] [ 63.253250] 4.3.0-rc3+ #298 Not tainted [ 63.254724] ------------------------------- [ 63.256401] ../include/linux/inetdevice.h:205 suspicious rcu_dereference_check() usage! [ 63.259450] [ 63.259450] other info that might help us debug this: [ 63.259450] [ 63.262297] [ 63.262297] rcu_scheduler_active = 1, debug_locks = 1 [ 63.264647] 1 lock held by ip/2870: [ 63.265896] #0: (rtnl_mutex){+.+.+.}, at: [<ffffffff813ebfb7>] rtnl_lock+0x12/0x14 [ 63.268858] [ 63.268858] stack backtrace: [ 63.270409] CPU: 4 PID: 2870 Comm: ip Not tainted 4.3.0-rc3+ #298 [ 63.272478] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.7.5-20140531_083030-gandalf 04/01/2014 [ 63.275745] 0000000000000001 ffff8800b8c9f8b8 ffffffff8125f73c ffff88013afcf301 [ 63.278185] ffff8800bab7a380 ffff8800b8c9f8e8 ffffffff8107bf30 ffff8800bb728000 [ 63.280634] ffff880139fe9a60 0000000000000000 ffff880139fe9a00 ffff8800b8c9f908 [ 63.283177] Call Trace: [ 63.283959] [<ffffffff8125f73c>] dump_stack+0x4c/0x68 [ 63.285593] [<ffffffff8107bf30>] lockdep_rcu_suspicious+0xfa/0x103 [ 63.287500] [<ffffffff8144d752>] __in_dev_get_rcu+0x48/0x4f [ 63.289169] [<ffffffff8144d797>] fib_rebalance+0x3e/0x127 [ 63.290753] [<ffffffff8144d986>] ? rcu_read_unlock+0x3e/0x5f [ 63.292442] [<ffffffff8144ea45>] fib_create_info+0xaf9/0xdcc [ 63.294093] [<ffffffff8106c12f>] ? sched_clock_local+0x12/0x75 [ 63.295791] [<ffffffff8145236a>] fib_table_insert+0x8c/0x451 [ 63.297493] [<ffffffff8144bf9c>] ? fib_get_table+0x36/0x43 [ 63.299109] [<ffffffff8144c3ca>] inet_rtm_newroute+0x43/0x51 [ 63.300709] [<ffffffff813ef684>] rtnetlink_rcv_msg+0x182/0x195 [ 63.302334] [<ffffffff8107d04c>] ? trace_hardirqs_on+0xd/0xf [ 63.303888] [<ffffffff813ebfb7>] ? rtnl_lock+0x12/0x14 [ 63.305346] [<ffffffff813ef502>] ? __rtnl_unlock+0x12/0x12 [ 63.306878] [<ffffffff81407c4c>] netlink_rcv_skb+0x3d/0x90 [ 63.308437] [<ffffffff813ec00e>] rtnetlink_rcv+0x21/0x28 [ 63.309916] [<ffffffff81407742>] netlink_unicast+0xfa/0x17f [ 63.311447] [<ffffffff81407a5e>] netlink_sendmsg+0x297/0x2dc [ 63.313029] [<ffffffff813c6cd4>] sock_sendmsg_nosec+0x12/0x1d [ 63.314597] [<ffffffff813c835b>] ___sys_sendmsg+0x196/0x21b [ 63.316125] [<ffffffff8100bf9f>] ? native_sched_clock+0x1f/0x3c [ 63.317671] [<ffffffff8106c12f>] ? sched_clock_local+0x12/0x75 [ 63.319185] [<ffffffff8106c397>] ? sched_clock_cpu+0x9d/0xb6 [ 63.320693] [<ffffffff8107e2d7>] ? __lock_is_held+0x32/0x54 [ 63.322145] [<ffffffff81159fcb>] ? __fget_light+0x4b/0x77 [ 63.323541] [<ffffffff813c8726>] __sys_sendmsg+0x3d/0x5b [ 63.324947] [<ffffffff813c8751>] SyS_sendmsg+0xd/0x19 [ 63.326274] [<ffffffff814c8f57>] entry_SYSCALL_64_fastpath+0x12/0x6f It looks like all of the code paths to fib_rebalance are under rtnl. Fixes: 0e884c78ee19 ("ipv4: L3 hash-based multipath") Cc: Peter Nørlund <pch@ordbogen.com> Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-07net: Refactor path selection in __ip_route_output_key_hashDavid Ahern
VRF device needs the same path selection following lookup to set source address. Rather than duplicating code, move existing code into a function that is exported to modules. Code move only; no functional change. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-05ipv4: Fix compilation errors in fib_rebalancePeter Nørlund
This fixes net/built-in.o: In function `fib_rebalance': fib_semantics.c:(.text+0x9df14): undefined reference to `__divdi3' and net/built-in.o: In function `fib_rebalance': net/ipv4/fib_semantics.c:572: undefined reference to `__aeabi_ldivmod' Fixes: 0e884c78ee19 ("ipv4: L3 hash-based multipath") Signed-off-by: Peter Nørlund <pch@ordbogen.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-05ipv4: L3 hash-based multipathPeter Nørlund
Replaces the per-packet multipath with a hash-based multipath using source and destination address. Signed-off-by: Peter Nørlund <pch@ordbogen.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-01net: Make table id type u32David Ahern
A number of VRF patches used 'int' for table id. It should be u32 to be consistent with the rest of the stack. Fixes: 4e3c89920cd3a ("net: Introduce VRF related flags and helpers") 15be405eb2ea9 ("net: Add inet_addr lookup by table") 30bbaa1950055 ("net: Fix up inet_addr_type checks") 021dd3b8a142d ("net: Add routes to the table associated with the device") dc028da54ed35 ("inet: Move VRF table lookup to inlined function") f6d3c19274c74 ("net: FIB tracepoints") Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Reviewed-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-31tcp: use dctcp if enabled on the route to the initiatorDaniel Borkmann
Currently, the following case doesn't use DCTCP, even if it should: A responder has f.e. Cubic as system wide default, but for a specific route to the initiating host, DCTCP is being set in RTAX_CC_ALGO. The initiating host then uses DCTCP as congestion control, but since the initiator sets ECT(0), tcp_ecn_create_request() doesn't set ecn_ok, and we have to fall back to Reno after 3WHS completes. We were thinking on how to solve this in a minimal, non-intrusive way without bloating tcp_ecn_create_request() needlessly: lets cache the CA ecn option flag in RTAX_FEATURES. In other words, when ECT(0) is set on the SYN packet, set ecn_ok=1 iff route RTAX_FEATURES contains the unexposed (internal-only) DST_FEATURE_ECN_CA. This allows to only do a single metric feature lookup inside tcp_ecn_create_request(). Joint work with Florian Westphal. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-31fib, fib6: reject invalid feature bitsDaniel Borkmann
Feature bits that are invalid should not be accepted by the kernel, only the lower 4 bits may be configured, but not the remaining ones. Even from these 4, 2 of them are unused. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-31net: fib: move metrics parsing to a helperFlorian Westphal
fib_create_info() is already quite large, so before adding more code to the metrics section move that to a helper, similar to ip6_convert_metrics. Suggested-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-24lwt: Add cfg argument to build_stateTom Herbert
Add cfg and family arguments to lwt build state functions. cfg is a void pointer and will either be a pointer to a fib_config or fib6_config structure. The family parameter indicates which one (either AF_INET or AF_INET6). LWT encpasulation implementation may use the fib configuration to build the LWT state. Signed-off-by: Tom Herbert <tom@herbertland.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-20net: Fix nexthop lookupsDavid Ahern
Andreas reported breakage adding routes with local nexthops: $ ip route show table main ... 172.28.0.0/24 dev vnf-xe1p0 proto kernel scope link src 172.28.0.16 $ ip route add 10.0.0.0/8 via 172.28.0.32 table 100 dev vnf-xe1p0 RTNETLINK answers: Resource temporarily unavailable 3bfd847203c changed the lookup to use the passed in table but for cases like this the nexthop is in the local table rather than the passed in table. Fixes: 3bfd847203c ("net: Use passed in table for nexthop lookups") Reported-by: Andreas Schultz <aschultz@tpip.net> Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-20ipv4: Make fib_encap_match staticYing Xue
Make fib_encap_match() static as it isn't used outside the file. Signed-off-by: Ying Xue <ying.xue@windriver.com> Reviewed-by: Jiri Benc <jbenc@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-18lwtunnel: fix memory leakJiri Benc
The built lwtunnel_state struct has to be freed after comparison. Fixes: 571e722676fe3 ("ipv4: support for fib route lwtunnel encap attributes") Signed-off-by: Jiri Benc <jbenc@redhat.com> Acked-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-16ipv4: fix refcount leak in fib_check_nh()Eric Dumazet
fib_lookup() forces FIB_LOOKUP_NOREF flag, while fib_table_lookup() does not. This patch solves the typical message at reboot time or device dismantle : unregister_netdevice: waiting for eth0 to become free. Usage count = 4 Fixes: 3bfd847203c6 ("net: Use passed in table for nexthop lookups") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: David Ahern <dsa@cumulusnetworks.com> Acked-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-13net: Use passed in table for nexthop lookupsDavid Ahern
If a user passes in a table for new routes use that table for nexthop lookups. Specifically, this solves the case where a connected route does not exist in the main table, but only another table and then a subsequent route is added with a next hop using the connected route. ie., $ ip route ls default via 10.0.2.2 dev eth0 10.0.2.0/24 dev eth0 proto kernel scope link src 10.0.2.15 169.254.0.0/16 dev eth0 scope link metric 1003 192.168.56.0/24 dev eth1 proto kernel scope link src 192.168.56.51 $ ip route ls table 10 1.1.1.0/24 dev eth2 scope link Without this patch adding a nexthop route fails: $ ip route add table 10 2.2.2.0/24 via 1.1.1.10 RTNETLINK answers: Network is unreachable With this patch the route is added successfully. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-13net: Add routes to the table associated with the deviceDavid Ahern
When a device associated with a VRF is brought up or down routes should be added to/removed from the table associated with the VRF. fib_magic defaults to using the main or local tables. Have it use the table with the device if there is one. A part of this is directing prefsrc validations to the correct table as well. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-13net: Fix up inet_addr_type checksDavid Ahern
Currently inet_addr_type and inet_dev_addr_type expect local addresses to be in the local table. With the VRF device local routes for devices associated with a VRF will be in the table associated with the VRF. Provide an alternate inet_addr lookup to use a specific table rather than defaulting to the local table. inet_addr_type_dev_table keeps the same semantics as inet_addr_type but if the passed in device is enslaved to a VRF then the table for that VRF is used for the lookup. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-31Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts: arch/s390/net/bpf_jit_comp.c drivers/net/ethernet/ti/netcp_ethss.c net/bridge/br_multicast.c net/ipv4/ip_fragment.c All four conflicts were cases of simple overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-27lwtunnel: change prototype of lwtunnel_state_get()Nicolas Dichtel
It saves some lines and simplify a bit the code when the state is returning by this function. It's also useful to handle a NULL entry. To avoid too long lines, I've also renamed lwtunnel_state_get() and lwtunnel_state_put() to lwtstate_get() and lwtstate_put(). CC: Thomas Graf <tgraf@suug.ch> CC: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Acked-by: Thomas Graf <tgraf@suug.ch> Acked-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-26ipv4: be more aggressive when probing alternative gatewaysJulian Anastasov
Currently, we do not notice if new alternative gateways are added. We can do it by checking for present neigh entry. Also, gateways that are currently probed (NUD_INCOMPLETE) can be skipped from round-robin probing. Suggested-by: Florian Westphal <fw@strlen.de> Signed-off-by: Julian Anastasov <ja@ssi.bg> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-24ipv4: consider TOS in fib_select_defaultJulian Anastasov
fib_select_default considers alternative routes only when res->fi is for the first alias in res->fa_head. In the common case this can happen only when the initial lookup matches the first alias with highest TOS value. This prevents the alternative routes to require specific TOS. This patch solves the problem as follows: - routes that require specific TOS should be returned by fib_select_default only when TOS matches, as already done in fib_table_lookup. This rule implies that depending on the TOS we can have many different lists of alternative gateways and we have to keep the last used gateway (fa_default) in first alias for the TOS instead of using single tb_default value. - as the aliases are ordered by many keys (TOS desc, fib_priority asc), we restrict the possible results to routes with matching TOS and lowest metric (fib_priority) and routes that match any TOS, again with lowest metric. For example, packet with TOS 8 can not use gw3 (not lowest metric), gw4 (different TOS) and gw6 (not lowest metric), all other gateways can be used: tos 8 via gw1 metric 2 <--- res->fa_head and res->fi tos 8 via gw2 metric 2 tos 8 via gw3 metric 3 tos 4 via gw4 tos 0 via gw5 tos 0 via gw6 metric 1 Reported-by: Hagen Paul Pfeifer <hagen@jauu.net> Signed-off-by: Julian Anastasov <ja@ssi.bg> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-24ipv4: fib_select_default should match the prefixJulian Anastasov
fib_trie starting from 4.1 can link fib aliases from different prefixes in same list. Make sure the alternative gateways are in same table and for same prefix (0) by checking tb_id and fa_slen. Fixes: 79e5ad2ceb00 ("fib_trie: Remove leaf_info") Signed-off-by: Julian Anastasov <ja@ssi.bg> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-21ipv4: support for fib route lwtunnel encap attributesRoopa Prabhu
This patch adds support in ipv4 fib functions to parse user provided encap attributes and attach encap state data to fib_nh and rtable. Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-28ipv4: fix RCU lockdep warning from linkdown changesAndy Gospodarek
The following lockdep splat was seen due to the wrong context for grabbing in_dev. =============================== [ INFO: suspicious RCU usage. ] 4.1.0-next-20150626-dbg-00020-g54a6d91-dirty #244 Not tainted ------------------------------- include/linux/inetdevice.h:205 suspicious rcu_dereference_check() usage! other info that might help us debug this: rcu_scheduler_active = 1, debug_locks = 0 2 locks held by ip/403: #0: (rtnl_mutex){+.+.+.}, at: [<ffffffff81453305>] rtnl_lock+0x17/0x19 #1: ((inetaddr_chain).rwsem){.+.+.+}, at: [<ffffffff8105c327>] __blocking_notifier_call_chain+0x35/0x6a stack backtrace: CPU: 2 PID: 403 Comm: ip Not tainted 4.1.0-next-20150626-dbg-00020-g54a6d91-dirty #244 0000000000000001 ffff8800b189b728 ffffffff8150a542 ffffffff8107a8b3 ffff880037bbea40 ffff8800b189b758 ffffffff8107cb74 ffff8800379dbd00 ffff8800bec85800 ffff8800bf9e13c0 00000000000000ff ffff8800b189b7d8 Call Trace: [<ffffffff8150a542>] dump_stack+0x4c/0x6e [<ffffffff8107a8b3>] ? up+0x39/0x3e [<ffffffff8107cb74>] lockdep_rcu_suspicious+0xf7/0x100 [<ffffffff814b63c3>] fib_dump_info+0x227/0x3e2 [<ffffffff814b6624>] rtmsg_fib+0xa6/0x116 [<ffffffff814b978f>] fib_table_insert+0x316/0x355 [<ffffffff814b362e>] fib_magic+0xb7/0xc7 [<ffffffff814b4803>] fib_add_ifaddr+0xb1/0x13b [<ffffffff814b4d09>] fib_inetaddr_event+0x36/0x90 [<ffffffff8105c086>] notifier_call_chain+0x4c/0x71 [<ffffffff8105c340>] __blocking_notifier_call_chain+0x4e/0x6a [<ffffffff8105c370>] blocking_notifier_call_chain+0x14/0x16 [<ffffffff814a7f50>] __inet_insert_ifa+0x1a5/0x1b3 [<ffffffff814a894d>] inet_rtm_newaddr+0x350/0x35f [<ffffffff81457866>] rtnetlink_rcv_msg+0x17b/0x18a [<ffffffff8107e7c3>] ? trace_hardirqs_on+0xd/0xf [<ffffffff8146965f>] ? netlink_deliver_tap+0x1cb/0x1f7 [<ffffffff814576eb>] ? rtnl_newlink+0x72a/0x72a ... This patch resolves that splat. Signed-off-by: Andy Gospodarek <gospo@cumulusnetworks.com> Reported-by: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-24net: ipv4 sysctl option to ignore routes when nexthop link is downAndy Gospodarek
This feature is only enabled with the new per-interface or ipv4 global sysctls called 'ignore_routes_with_linkdown'. net.ipv4.conf.all.ignore_routes_with_linkdown = 0 net.ipv4.conf.default.ignore_routes_with_linkdown = 0 net.ipv4.conf.lo.ignore_routes_with_linkdown = 0 ... When the above sysctls are set, will report to userspace that a route is dead and will no longer resolve to this nexthop when performing a fib lookup. This will signal to userspace that the route will not be selected. The signalling of a RTNH_F_DEAD is only passed to userspace if the sysctl is enabled and link is down. This was done as without it the netlink listeners would have no idea whether or not a nexthop would be selected. The kernel only sets RTNH_F_DEAD internally if the interface has IFF_UP cleared. With the new sysctl set, the following behavior can be observed (interface p8p1 is link-down): default via 10.0.5.2 dev p9p1 10.0.5.0/24 dev p9p1 proto kernel scope link src 10.0.5.15 70.0.0.0/24 dev p7p1 proto kernel scope link src 70.0.0.1 80.0.0.0/24 dev p8p1 proto kernel scope link src 80.0.0.1 dead linkdown 90.0.0.0/24 via 80.0.0.2 dev p8p1 metric 1 dead linkdown 90.0.0.0/24 via 70.0.0.2 dev p7p1 metric 2 90.0.0.1 via 70.0.0.2 dev p7p1 src 70.0.0.1 cache local 80.0.0.1 dev lo src 80.0.0.1 cache <local> 80.0.0.2 via 10.0.5.2 dev p9p1 src 10.0.5.15 cache While the route does remain in the table (so it can be modified if needed rather than being wiped away as it would be if IFF_UP was cleared), the proper next-hop is chosen automatically when the link is down. Now interface p8p1 is linked-up: default via 10.0.5.2 dev p9p1 10.0.5.0/24 dev p9p1 proto kernel scope link src 10.0.5.15 70.0.0.0/24 dev p7p1 proto kernel scope link src 70.0.0.1 80.0.0.0/24 dev p8p1 proto kernel scope link src 80.0.0.1 90.0.0.0/24 via 80.0.0.2 dev p8p1 metric 1 90.0.0.0/24 via 70.0.0.2 dev p7p1 metric 2 192.168.56.0/24 dev p2p1 proto kernel scope link src 192.168.56.2 90.0.0.1 via 80.0.0.2 dev p8p1 src 80.0.0.1 cache local 80.0.0.1 dev lo src 80.0.0.1 cache <local> 80.0.0.2 dev p8p1 src 80.0.0.1 cache and the output changes to what one would expect. If the sysctl is not set, the following output would be expected when p8p1 is down: default via 10.0.5.2 dev p9p1 10.0.5.0/24 dev p9p1 proto kernel scope link src 10.0.5.15 70.0.0.0/24 dev p7p1 proto kernel scope link src 70.0.0.1 80.0.0.0/24 dev p8p1 proto kernel scope link src 80.0.0.1 linkdown 90.0.0.0/24 via 80.0.0.2 dev p8p1 metric 1 linkdown 90.0.0.0/24 via 70.0.0.2 dev p7p1 metric 2 Since the dead flag does not appear, there should be no expectation that the kernel would skip using this route due to link being down. v2: Split kernel changes into 2 patches, this actually makes a behavioral change if the sysctl is set. Also took suggestion from Alex to simplify code by only checking sysctl during fib lookup and suggestion from Scott to add a per-interface sysctl. v3: Code clean-ups to make it more readable and efficient as well as a reverse path check fix. v4: Drop binary sysctl v5: Whitespace fixups from Dave v6: Style changes from Dave and checkpatch suggestions v7: One more checkpatch fixup Signed-off-by: Andy Gospodarek <gospo@cumulusnetworks.com> Signed-off-by: Dinesh Dutt <ddutt@cumulusnetworks.com> Acked-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-24net: track link-status of ipv4 nexthopsAndy Gospodarek
Add a fib flag called RTNH_F_LINKDOWN to any ipv4 nexthops that are reachable via an interface where carrier is off. No action is taken, but additional flags are passed to userspace to indicate carrier status. This also includes a cleanup to fib_disable_ip to more clearly indicate what event made the function call to replace the more cryptic force option previously used. v2: Split out kernel functionality into 2 patches, this patch simply sets and clears new nexthop flag RTNH_F_LINKDOWN. v3: Cleanups suggested by Alex as well as a bug noticed in fib_sync_down_dev and fib_sync_up when multipath was not enabled. v5: Whitespace and variable declaration fixups suggested by Dave. v6: Style fixups noticed by Dave; ran checkpatch to be sure I got them all. Signed-off-by: Andy Gospodarek <gospo@cumulusnetworks.com> Signed-off-by: Dinesh Dutt <ddutt@cumulusnetworks.com> Acked-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-02ipv4: remove the unnecessary codes in fib_info_hash_moveLi RongQing
The whole hlist will be moved, so not need to call hlist_del before add the hlist_node to other hlist_head. Signed-off-by: Li RongQing <roy.qing.li@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-03ipv4: coding style: comparison for equality with NULLIan Morris
The ipv4 code uses a mixture of coding styles. In some instances check for NULL pointer is done as x == NULL and sometimes as !x. !x is preferred according to checkpatch and this patch makes the code consistent by adopting the latter form. No changes detected by objdiff. Signed-off-by: Ian Morris <ipm@chirality.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-31netlink: implement nla_get_in_addr and nla_get_in6_addrJiri Benc
Those are counterparts to nla_put_in_addr and nla_put_in6_addr. Signed-off-by: Jiri Benc <jbenc@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-31netlink: implement nla_put_in_addr and nla_put_in6_addrJiri Benc
IP addresses are often stored in netlink attributes. Add generic functions to do that. For nla_put_in_addr, it would be nicer to pass struct in_addr but this is not used universally throughout the kernel, in way too many places __be32 is used to store IPv4 address. Signed-off-by: Jiri Benc <jbenc@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-12net: Kill hold_net release_netEric W. Biederman
hold_net and release_net were an idea that turned out to be useless. The code has been disabled since 2008. Kill the code it is long past due. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-27fib_trie: Convert fib_alias to hlist from listAlexander Duyck
There isn't any advantage to having it as a list and by making it an hlist we make the fib_alias more compatible with the list_info in terms of the type of list used. Signed-off-by: Alexander Duyck <alexander.h.duyck@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-25fib_trie: Move fib_find_alias to file where it is usedAlexander Duyck
The function fib_find_alias is only accessed by functions in fib_trie.c as such it makes sense to relocate it and cast it as static so that the compiler can take advantage of optimizations it can do to it as a local function. Signed-off-by: Alexander Duyck <alexander.h.duyck@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-18netlink: make nlmsg_end() and genlmsg_end() voidJohannes Berg
Contrary to common expectations for an "int" return, these functions return only a positive value -- if used correctly they cannot even return 0 because the message header will necessarily be in the skb. This makes the very common pattern of if (genlmsg_end(...) < 0) { ... } be a whole bunch of dead code. Many places also simply do return nlmsg_end(...); and the caller is expected to deal with it. This also commonly (at least for me) causes errors, because it is very common to write if (my_function(...)) /* error condition */ and if my_function() does "return nlmsg_end()" this is of course wrong. Additionally, there's not a single place in the kernel that actually needs the message length returned, and if anyone needs it later then it'll be very easy to just use skb->len there. Remove this, and make the functions void. This removes a bunch of dead code as described above. The patch adds lines because I did - return nlmsg_end(...); + nlmsg_end(...); + return 0; I could have preserved all the function's return values by returning skb->len, but instead I've audited all the places calling the affected functions and found that none cared. A few places actually compared the return value with <= 0 in dump functionality, but that could just be changed to < 0 with no change in behaviour, so I opted for the more efficient version. One instance of the error I've made numerous times now is also present in net/phonet/pn_netlink.c in the route_dumpit() function - it didn't check for <0 or <=0 and thus broke out of the loop every single time. I've preserved this since it will (I think) have caused the messages to userspace to be formatted differently with just a single message for every SKB returned to userspace. It's possible that this isn't needed for the tools that actually use this, but I don't even know what they are so couldn't test that changing this behaviour would be acceptable. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-05net: tcp: add RTAX_CC_ALGO fib handlingDaniel Borkmann
This patch adds the minimum necessary for the RTAX_CC_ALGO congestion control metric to be set up and dumped back to user space. While the internal representation of RTAX_CC_ALGO is handled as a u32 key, we avoided to expose this implementation detail to user space, thus instead, we chose the netlink attribute that is being exchanged between user space to be the actual congestion control algorithm name, similarly as in the setsockopt(2) API in order to allow for maximum flexibility, even for 3rd party modules. It is a bit unfortunate that RTAX_QUICKACK used up a whole RTAX slot as it should have been stored in RTAX_FEATURES instead, we first thought about reusing it for the congestion control key, but it brings more complications and/or confusion than worth it. Joint work with Florian Westphal. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-14ipv4: fix nexthop attlen check in fib_nh_matchJiri Pirko
fib_nh_match does not match nexthops correctly. Example: ip route add 172.16.10/24 nexthop via 192.168.122.12 dev eth0 \ nexthop via 192.168.122.13 dev eth0 ip route del 172.16.10/24 nexthop via 192.168.122.14 dev eth0 \ nexthop via 192.168.122.15 dev eth0 Del command is successful and route is removed. After this patch applied, the route is correctly matched and result is: RTNETLINK answers: No such process Please consider this for stable trees as well. Fixes: 4e902c57417c4 ("[IPv4]: FIB configuration using struct fib_config") Signed-off-by: Jiri Pirko <jiri@resnulli.us> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-05ipv4: fix a race in update_or_create_fnhe()Eric Dumazet
nh_exceptions is effectively used under rcu, but lacks proper barriers. Between kzalloc() and setting of nh->nh_exceptions(), we need a proper memory barrier. Signed-off-by: Eric Dumazet <edumazet@google.com> Fixes: 4895c771c7f00 ("ipv4: Add FIB nexthop exceptions.") Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-07ipv4: fib_semantics: increment fib_info_cnt after fib_info allocationSergey Popovich
Increment fib_info_cnt in fib_create_info() right after successfuly alllocating fib_info structure, overwise fib_metrics allocation failure leads to fib_info_cnt incorrectly decremented in free_fib_info(), called on error path from fib_create_info(). Signed-off-by: Sergey Popovich <popovich_sergei@mail.ru> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-16ipv4, fib: pass LOOPBACK_IFINDEX instead of 0 to flowi4_iifCong Wang
As suggested by Julian: Simply, flowi4_iif must not contain 0, it does not look logical to ignore all ip rules with specified iif. because in fib_rule_match() we do: if (rule->iifindex && (rule->iifindex != fl->flowi_iif)) goto out; flowi4_iif should be LOOPBACK_IFINDEX by default. We need to move LOOPBACK_IFINDEX to include/net/flow.h: 1) It is mostly used by flowi_iif 2) Fix the following compile error if we use it in flow.h by the patches latter: In file included from include/linux/netfilter.h:277:0, from include/net/netns/netfilter.h:5, from include/net/net_namespace.h:21, from include/linux/netdevice.h:43, from include/linux/icmpv6.h:12, from include/linux/ipv6.h:61, from include/net/ipv6.h:16, from include/linux/sunrpc/clnt.h:27, from include/linux/nfs_fs.h:30, from init/do_mounts.c:32: include/net/flow.h: In function ‘flowi4_init_output’: include/net/flow.h:84:32: error: ‘LOOPBACK_IFINDEX’ undeclared (first use in this function) Cc: Eric Biederman <ebiederm@xmission.com> Cc: Julian Anastasov <ja@ssi.bg> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: Cong Wang <cwang@twopensource.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-27 16:56:09 +0000