summaryrefslogtreecommitdiff
path: root/net/ipv4/esp4.c
AgeCommit message (Collapse)Author
2018-01-17Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Overlapping changes all over. The mini-qdisc bits were a little bit tricky, however. Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-08xfrm: Return error on unknown encap_type in init_stateHerbert Xu
Currently esp will happily create an xfrm state with an unknown encap type for IPv4, without setting the necessary state parameters. This patch fixes it by returning -EINVAL. There is a similar problem in IPv6 where if the mode is unknown we will skip initialisation while returning zero. However, this is harmless as the mode has already been checked further up the stack. This patch removes this anomaly by aligning the IPv6 behaviour with IPv4 and treating unknown modes (which cannot actually happen) as transport mode. Fixes: 38320c70d282 ("[IPSEC]: Use crypto_aead and authenc in ESP") Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2017-12-20esp: Don't require synchronous crypto fallback on offloading anymore.Steffen Klassert
We support asynchronous crypto on layer 2 ESP now. So no need to force synchronous crypto fallback on offloading anymore. Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2017-12-20net: Add asynchronous callbacks for xfrm on layer 2.Steffen Klassert
This patch implements asynchronous crypto callbacks and a backlog handler that can be used when IPsec is done at layer 2 in the TX path. It also extends the skb validate functions so that we can update the driver transmit return codes based on async crypto operation or to indicate that we queued the packet in a backlog queue. Joint work with: Aviv Heller <avivh@mellanox.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2017-11-03net: use -ENOSPC for transient busy indicationGilad Ben-Yossef
Replace -EBUSY with -ENOSPC when handling transient busy indication in the absence of backlog. Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-09-01Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Three cases of simple overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-31xfrm: Add support for network devices capable of removing the ESP trailerYossi Kuperman
In conjunction with crypto offload [1], removing the ESP trailer by hardware can potentially improve the performance by avoiding (1) a cache miss incurred by reading the nexthdr field and (2) the necessity to calculate the csum value of the trailer in order to keep skb->csum valid. This patch introduces the changes to the xfrm stack and merely serves as an infrastructure. Subsequent patch to mlx5 driver will put this to a good use. [1] https://www.mail-archive.com/netdev@vger.kernel.org/msg175733.html Signed-off-by: Yossi Kuperman <yossiku@mellanox.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2017-08-25esp: Fix skb tailroom calculationSteffen Klassert
We use skb_availroom to calculate the skb tailroom for the ESP trailer. skb_availroom calculates the tailroom and subtracts this value by reserved_tailroom. However reserved_tailroom is a union with the skb mark. This means that we subtract the tailroom by the skb mark if set. Fix this by using skb_tailroom instead. Fixes: cac2661c53f3 ("esp4: Avoid skb_cow_data whenever possible") Fixes: 03e2a30f6a27 ("esp6: Avoid skb_cow_data whenever possible") Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2017-08-25esp: Fix locking on page fragment allocationSteffen Klassert
We allocate the page fragment for the ESP trailer inside a spinlock, but consume it outside of the lock. This is racy as some other cou could get the same page fragment then. Fix this by consuming the page fragment inside the lock too. Fixes: cac2661c53f3 ("esp4: Avoid skb_cow_data whenever possible") Fixes: 03e2a30f6a27 ("esp6: Avoid skb_cow_data whenever possible") Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2017-08-02esp4: Support RX checksum with crypto offloadIlan Tayari
Keep the device's reported ip_summed indication in case crypto was offloaded by the device. Subtract the csum values of the stripped parts (esp header+iv, esp trailer+auth_data) to keep value correct. Note: CHECKSUM_COMPLETE should be indicated only if skb->csum has the post-decryption offload csum value. Signed-off-by: Ariel Levkovich <lariel@mellanox.com> Signed-off-by: Ilan Tayari <ilant@mellanox.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2017-07-13esp: Fix memleaks on error paths.Steffen Klassert
We leak the temporary allocated resources in error paths, fix this by freeing them. Fixes: fca11ebde3f ("esp4: Reorganize esp_output") Fixes: 383d0350f2c ("esp6: Reorganize esp_output") Fixes: 3f29770723f ("ipsec: check return value of skb_to_sgvec always") Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2017-07-01net: convert sock.sk_wmem_alloc from atomic_t to refcount_tReshetova, Elena
refcount_t type and corresponding API should be used instead of atomic_t when the variable is used as a reference counter. This allows to avoid accidental refcounter overflows that might lead to use-after-free situations. Signed-off-by: Elena Reshetova <elena.reshetova@intel.com> Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com> Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: David Windsor <dwindsor@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-16networking: make skb_push & __skb_push return void pointersJohannes Berg
It seems like a historic accident that these return unsigned char *, and in many places that means casts are required, more often than not. Make these functions return void * and remove all the casts across the tree, adding a (u8 *) cast only where the unsigned char pointer was used directly, all done with the following spatch: @@ expression SKB, LEN; typedef u8; identifier fn = { skb_push, __skb_push, skb_push_rcsum }; @@ - *(fn(SKB, LEN)) + *(u8 *)fn(SKB, LEN) @@ expression E, SKB, LEN; identifier fn = { skb_push, __skb_push, skb_push_rcsum }; type T; @@ - E = ((T *)(fn(SKB, LEN))) + E = fn(SKB, LEN) @@ expression SKB, LEN; identifier fn = { skb_push, __skb_push, skb_push_rcsum }; @@ - fn(SKB, LEN)[0] + *(u8 *)fn(SKB, LEN) Note that the last part there converts from push(...)[0] to the more idiomatic *(u8 *)push(...). Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-04ipsec: check return value of skb_to_sgvec alwaysJason A. Donenfeld
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Cc: Steffen Klassert <steffen.klassert@secunet.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-04esp4: Fix udpencap for local TCP packets.Steffen Klassert
Locally generated TCP packets are usually cloned, so we do skb_cow_data() on this packets. After that we need to reload the pointer to the esp header. On udpencap this header has an offset to skb_transport_header, so take this offset into account. Fixes: 67d349ed603 ("net/esp4: Fix invalid esph pointer crash") Fixes: fca11ebde3f0 ("esp4: Reorganize esp_output") Reported-by: Don Bowman <db@donbowman.ca> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2017-05-01net/esp4: Fix invalid esph pointer crashIlan Tayari
Both esp_output and esp_xmit take a pointer to the ESP header and place it in esp_info struct prior to calling esp_output_head. Inside esp_output_head, the call to esp_output_udp_encap makes sure to update the pointer if it gets invalid. However, if esp_output_head itself calls skb_cow_data, the pointer is not updated and stays invalid, causing a crash after esp_output_head returns. Update the pointer if it becomes invalid in esp_output_head Fixes: fca11ebde3f0 ("esp4: Reorganize esp_output") Signed-off-by: Ilan Tayari <ilant@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-24esp: Fix misplaced spin_unlock_bh.Steffen Klassert
A recent commit moved esp_alloc_tmp() out of a lock protected region, but forgot to remove the unlock from the error path. This patch removes the forgotten unlock. While at it, remove some unneeded error assignments too. Fixes: fca11ebde3f0 ("esp4: Reorganize esp_output") Fixes: 383d0350f2cc ("esp6: Reorganize esp_output") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2017-04-14esp: Use a synchronous crypto algorithm on offloading.Steffen Klassert
We need a fallback algorithm for crypto offloading to a NIC. This is because packets can be rerouted to other NICs that don't support crypto offloading. The fallback is going to be implemented at layer2 where we know the final output device but can't handle asynchronous returns fron the crypto layer. Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2017-04-14esp: Add gso handlers for esp4 and esp6Steffen Klassert
This patch extends the xfrm_type by an encap function pointer and implements esp4_gso_encap and esp6_gso_encap. These functions doing the basic esp encapsulation for a GSO packet. In case the GSO packet needs to be segmented in software, we add gso_segment functions. This codepath is going to be used on esp hardware offloads. Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2017-04-14esp4: Reorganize esp_outputSteffen Klassert
We need a fallback for ESP at layer 2, so split esp_output into generic functions that can be used at layer 3 and layer 2 and use them in esp_output. We also add esp_xmit which is used for the layer 2 fallback. Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2017-04-14xfrm: Add an IPsec hardware offloading APISteffen Klassert
This patch adds all the bits that are needed to do IPsec hardware offload for IPsec states and ESP packets. We add xfrmdev_ops to the net_device. xfrmdev_ops has function pointers that are needed to manage the xfrm states in the hardware and to do a per packet offloading decision. Joint work with: Ilan Tayari <ilant@mellanox.com> Guy Shapiro <guysh@mellanox.com> Yossi Kuperman <yossiku@mellanox.com> Signed-off-by: Guy Shapiro <guysh@mellanox.com> Signed-off-by: Ilan Tayari <ilant@mellanox.com> Signed-off-by: Yossi Kuperman <yossiku@mellanox.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2017-01-17esp: Introduce a helper to setup the trailerSteffen Klassert
We need to setup the trailer in two different cases, so add a helper to avoid code duplication. Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2017-01-17esp4: Avoid skb_cow_data whenever possibleSteffen Klassert
This patch tries to avoid skb_cow_data on esp4. On the encrypt side we add the IPsec tailbits to the linear part of the buffer if there is space on it. If there is no space on the linear part, we add a page fragment with the tailbits to the buffer and use separate src and dst scatterlists. On the decrypt side, we leave the buffer as it is if it is not cloned. With this, we can avoid a linearization of the buffer in most of the cases. Joint work with: Sowmini Varadhan <sowmini.varadhan@oracle.com> Ilan Tayari <ilant@mellanox.com> Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com> Signed-off-by: Ilan Tayari <ilant@mellanox.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2016-11-30esp4: Fix integrity verification when ESN are usedTobias Brunner
When handling inbound packets, the two halves of the sequence number stored on the skb are already in network order. Fixes: 7021b2e1cddd ("esp4: Switch to new AEAD interface") Signed-off-by: Tobias Brunner <tobias@strongswan.org> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2016-06-23esp: Fix ESN generation under UDP encapsulationHerbert Xu
Blair Steven noticed that ESN in conjunction with UDP encapsulation is broken because we set the temporary ESP header to the wrong spot. This patch fixes this by first of all using the right spot, i.e., 4 bytes off the real ESP header, and then saving this information so that after encryption we can restore it properly. Fixes: 7021b2e1cddd ("esp4: Switch to new AEAD interface") Reported-by: Blair Steven <Blair.Steven@alliedtelesis.co.nz> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Acked-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-28esp4: Switch to new AEAD interfaceHerbert Xu
This patch makes use of the new AEAD interface which uses a single SG list instead of separate lists for the AD and plain text. The IV generation is also now carried out through normal AEAD methods. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-04-03ipv4: coding style: comparison for equality with NULLIan Morris
The ipv4 code uses a mixture of coding styles. In some instances check for NULL pointer is done as x == NULL and sometimes as !x. !x is preferred according to checkpatch and this patch makes the code consistent by adopting the latter form. No changes detected by objdiff. Signed-off-by: Ian Morris <ipm@chirality.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-06net: esp: Convert NETDEBUG to pr_infoJoe Perches
Commit 64ce207306de ("[NET]: Make NETDEBUG pure printk wrappers") originally had these NETDEBUG printks as always emitting. Commit a2a316fd068c ("[NET]: Replace CONFIG_NET_DEBUG with sysctl") added a net_msg_warn sysctl to these NETDEBUG uses. Convert these NETDEBUG uses to normal pr_info calls. This changes the output prefix from "ESP: " to include "IPSec: " for the ipv4 case and "IPv6: " for the ipv6 case. These output lines are now like the other messages in the files. Other miscellanea: Neaten the arithmetic spacing to be consistent with other arithmetic spacing in the files. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-04esp4: remove assignment in if conditionFabian Frederick
Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-25esp4: Use the IPsec protocol multiplexer APISteffen Klassert
Switch esp4 to use the new IPsec protocol multiplexer. Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2013-10-29net: esp{4,6}: get rid of struct esp_dataMathias Krause
struct esp_data consists of a single pointer, vanishing the need for it to be a structure. Fold the pointer into 'data' direcly, removing one level of pointer indirection. Signed-off-by: Mathias Krause <mathias.krause@secunet.com> Cc: Steffen Klassert <steffen.klassert@secunet.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2013-10-29net: esp{4,6}: remove padlen from struct esp_dataMathias Krause
The padlen member of struct esp_data is always zero. Get rid of it. Signed-off-by: Mathias Krause <mathias.krause@secunet.com> Cc: Steffen Klassert <steffen.klassert@secunet.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2013-08-05net: esp{4,6}: fix potential MTU calculation overflowsDaniel Borkmann
Commit 91657eafb ("xfrm: take net hdr len into account for esp payload size calculation") introduced a possible interger overflow in esp{4,6}_get_mtu() handlers in case of x->props.mode equals XFRM_MODE_TUNNEL. Thus, the following expression will overflow unsigned int net_adj; ... <case ipv{4,6} XFRM_MODE_TUNNEL> net_adj = 0; ... return ((mtu - x->props.header_len - crypto_aead_authsize(esp->aead) - net_adj) & ~(align - 1)) + (net_adj - 2); where (net_adj - 2) would be evaluated as <foo> + (0 - 2) in an unsigned context. Fix it by simply removing brackets as those operations here do not need to have special precedence. Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Cc: Benjamin Poirier <bpoirier@suse.de> Cc: Steffen Klassert <steffen.klassert@secunet.com> Acked-by: Benjamin Poirier <bpoirier@suse.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-03ipv4: properly refresh rtable entries on pmtu/redirect eventsTimo Teräs
This reverts commit 05ab86c5 (xfrm4: Invalidate all ipv4 routes on IPsec pmtu events). Flushing all cached entries is not needed. Instead, invalidate only the related next hop dsts to recheck for the added next hop exception where needed. This also fixes a subtle race due to bumping generation id's before updating the pmtu. Cc: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Timo Teräs <timo.teras@iki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-15esp4: fix error return code in esp_output()Wei Yongjun
Fix to return a negative error code from the error handling case instead of 0, as returned elsewhere in this function. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Acked-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-21xfrm4: Invalidate all ipv4 routes on IPsec pmtu eventsSteffen Klassert
On IPsec pmtu events we can't access the transport headers of the original packet, so we can't find the socket that sent the packet. The only chance to notify the socket about the pmtu change is to force a relookup for all routes. This patch implenents this for the IPsec protocols. Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2013-01-08ah4/esp4: set transport header correctly for IPsec tunnel mode.Li RongQing
IPsec tunnel does not set ECN field to CE in inner header when the ECN field in the outer header is CE, and the ECN field in the inner header is ECT(0) or ECT(1). The cause is ipip_hdr() does not return the correct address of inner header since skb->transport-header is not the inner header after esp_input_done2(), or ah_input(). Signed-off-by: Li RongQing <roy.qing.li@gmail.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2012-07-11ipv4: Add redirect support to all protocol icmp error handlers.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-14ipv4: Handle PMTU in all ICMP error handlers.David S. Miller
With ip_rt_frag_needed() removed, we have to explicitly update PMTU information in every ICMP error handler. Create two helper functions to facilitate this. 1) ipv4_sk_update_pmtu() This updates the PMTU when we have a socket context to work with. 2) ipv4_update_pmtu() Raw version, used when no socket context is available. For this interface, we essentially just pass in explicit arguments for the flow identity information we would have extracted from the socket. And you'll notice that ipv4_sk_update_pmtu() is simply implemented in terms of ipv4_update_pmtu() Note that __ip_route_output_key() is used, rather than something like ip_route_output_flow() or ip_route_output_key(). This is because we absolutely do not want to end up with a route that does IPSEC encapsulation and the like. Instead, we only want the route that would get us to the node described by the outermost IP header. Reported-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-27xfrm: take net hdr len into account for esp payload size calculationBenjamin Poirier
Corrects the function that determines the esp payload size. The calculations done in esp{4,6}_get_mtu() lead to overlength frames in transport mode for certain mtu values and suboptimal frames for others. According to what is done, mainly in esp{,6}_output() and tcp_mtu_to_mss(), net_header_len must be taken into account before doing the alignment calculation. Signed-off-by: Benjamin Poirier <bpoirier@suse.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-12net: ipv4: Standardize prefixes for message loggingJoe Perches
Add #define pr_fmt(fmt) as appropriate. Add "IPv4: ", "TCP: ", and "IPsec: " to appropriate files. Standardize on "UDPLite: " for appropriate uses. Some prefixes were previously "UDPLITE: " and "UDP-Lite: ". Add KBUILD_MODNAME ": " to icmp and gre. Remove embedded prefixes as appropriate. Add missing "\n" to pr_info in gre.c. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-11net: Convert printks to pr_<level>Joe Perches
Use a more current kernel messaging style. Convert a printk block to print_hex_dump. Coalesce formats, align arguments. Use %s, __func__ instead of embedding function names. Some messages that were prefixed with <foo>_close are now prefixed with <foo>_fini. Some ah4 and esp messages are now not prefixed with "ip ". The intent of this patch is to later add something like #define pr_fmt(fmt) "IPv4: " fmt. to standardize the output messages. Text size is trivially reduced. (x86-32 allyesconfig) $ size net/ipv4/built-in.o* text data bss dec hex filename 887888 31558 249696 1169142 11d6f6 net/ipv4/built-in.o.new 887934 31558 249800 1169292 11d78c net/ipv4/built-in.o.old Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-22inet: constify ip headers and in6_addrEric Dumazet
Add const qualifiers to structs iphdr, ipv6hdr and in6_addr pointers where possible, to make code intention more obvious. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-13esp4: Add support for IPsec extended sequence numbersSteffen Klassert
This patch adds IPsec extended sequence numbers support to esp4. We use the authencesn crypto algorithm to handle esp with separate encryption/authentication algorithms. Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-13xfrm: Use separate low and high order bits of the sequence numbers in ↵Steffen Klassert
xfrm_skb_cb To support IPsec extended sequence numbers, we split the output sequence numbers of xfrm_skb_cb in low and high order 32 bits and we add the high order 32 bits to the input sequence numbers. All users are updated accordingly. Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-10xfrm: Traffic Flow Confidentiality for IPv4 ESPMartin Willi
Add TFC padding to all packets smaller than the boundary configured on the xfrm state. If the boundary is larger than the PMTU, limit padding to the PMTU. Signed-off-by: Martin Willi <martin@strongswan.org> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-22xfrm: SA lookups signature with markJamal Hadi Salim
pass mark to all SA lookups to prepare them for when we add code to have them search. Signed-off-by: Jamal Hadi Salim <hadi@cyberus.ca> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-25xfrm: Use the user specified truncation length in ESP and AHMartin Willi
Instead of using the hardcoded truncation for authentication algorithms, use the truncation length specified on xfrm_state. Signed-off-by: Martin Willi <martin@strongswan.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-14net: constify struct net_protocolAlexey Dobriyan
Remove long removed "inet_protocol_base" declaration. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-25netns xfrm: AH/ESP in netns!Alexey Dobriyan
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-12 01:57:08 +0000