summaryrefslogtreecommitdiff
path: root/net/ieee802154
AgeCommit message (Collapse)Author
2016-10-27genetlink: mark families as __ro_after_initJohannes Berg
Now genl_register_family() is the only thing (other than the users themselves, perhaps, but I didn't find any doing that) writing to the family struct. In all families that I found, genl_register_family() is only called from __init functions (some indirectly, in which case I've add __init annotations to clarifly things), so all can actually be marked __ro_after_init. This protects the data structure from accidental corruption. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-27genetlink: statically initialize familiesJohannes Berg
Instead of providing macros/inline functions to initialize the families, make all users initialize them statically and get rid of the macros. This reduces the kernel code size by about 1.6k on x86-64 (with allyesconfig). Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-27genetlink: no longer support using static family IDsJohannes Berg
Static family IDs have never really been used, the only use case was the workaround I introduced for those users that assumed their family ID was also their multicast group ID. Additionally, because static family IDs would never be reserved by the generic netlink code, using a relatively low ID would only work for built-in families that can be registered immediately after generic netlink is started, which is basically only the control family (apart from the workaround code, which I also had to add code for so it would reserve those IDs) Thus, anything other than GENL_ID_GENERATE is flawed and luckily not used except in the cases I mentioned. Move those workarounds into a few lines of code, and then get rid of GENL_ID_GENERATE entirely, making it more robust. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-27genetlink: introduce and use genl_family_attrbuf()Johannes Berg
This helper function allows family implementations to access their family's attrbuf. This gets rid of the attrbuf usage in families, and also adds locking validation, since it's not valid to use the attrbuf with parallel_ops or outside of the dumpit callback. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-08ieee802154: 6lowpan: fix intra pan id checkAlexander Aring
The RIOT-OS stack does send intra-pan frames but don't set the intra pan flag inside the mac header. It seems this is valid frame addressing but inefficient. Anyway this patch adds a new function for intra pan addressing, doesn't matter if intra pan flag or source and destination are the same. The newly introduction function will be used to check on intra pan addressing for 6lowpan. Signed-off-by: Alexander Aring <aar@pengutronix.de> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-07-08ieee802154: allow netns create of lowpan interfaceAlexander Aring
This patch reverts commit f9d1ce8f81eb ("ieee802154: fix netns settings"). The lowpan interface need to be created inside the net namespace where the wpan interface is available. The wpan namespace can be changed only by nl802154 before. Without this patch it's not possible to create a lowpan interface for a wpan interface which isn't inside init_net namespace. Cc: Nicolas Dichtel <nicolas.dichtel@6wind.com> Reviewed-by: Stefan Schmidt <stefan@osg.samsung.com> Signed-off-by: Alexander Aring <aar@pengutronix.de> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-07-08ieee802154: add netns supportAlexander Aring
This patch adds netns support for 802.15.4 subsystem. Most parts are copy&pasted from wireless subsystem, it has the identically userspace API. Cc: Nicolas Dichtel <nicolas.dichtel@6wind.com> Reviewed-by: Stefan Schmidt <stefan@osg.samsung.com> Signed-off-by: Alexander Aring <aar@pengutronix.de> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-07-05net: add dev arg to ndo_neigh_construct/destroyJiri Pirko
As the following patch will allow upper devices to follow the call down lower devices, we need to add dev here and not rely on n->dev. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-156lowpan: add support for 802.15.4 short addr handlingAlexander Aring
This patch adds necessary handling for use the short address for 802.15.4 6lowpan. It contains support for IPHC address compression and new matching algorithmn to decide which link layer address will be used for 802.15.4 frame. Reviewed-by: Stefan Schmidt <stefan@osg.samsung.com> Signed-off-by: Alexander Aring <aar@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-156lowpan: add private neighbour dataAlexander Aring
This patch will introduce a 6lowpan neighbour private data. Like the interface private data we handle private data for generic 6lowpan and for link-layer specific 6lowpan. The current first use case if to save the short address for a 802.15.4 6lowpan neighbour. Cc: David S. Miller <davem@davemloft.net> Reviewed-by: Stefan Schmidt <stefan@osg.samsung.com> Acked-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: Alexander Aring <aar@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-09net: add netdev_lockdep_set_classes() helperEric Dumazet
It is time to add netdev_lockdep_set_classes() helper so that lockdep annotations per device type are easier to manage. This removes a lot of copies and missing annotations. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-07net_sched: transform qdisc running bit into a seqcountEric Dumazet
Instead of using a single bit (__QDISC___STATE_RUNNING) in sch->__state, use a seqcount. This adds lockdep support, but more importantly it will allow us to sample qdisc/class statistics without having to grab qdisc root lock. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Cong Wang <xiyou.wangcong@gmail.com> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-29ieee802154: fix logic error in ieee802154_llsec_parse_dev_addrBaozeng Ding
Fix a logic error to avoid potential null pointer dereference. Signed-off-by: Baozeng Ding <sploving1@gmail.com> Reviewed-by: Stefan Schmidt<stefan@osg.samsung.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-26Merge branch 'for-upstream' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next Johan Hedberg says: ==================== pull request: bluetooth-next 2016-04-26 Here's another set of Bluetooth & 802.15.4 patches for the 4.7 kernel: - Cleanups & refactoring of ieee802154 & 6lowpan code - Security related additions to ieee802154 and mrf24j40 driver - Memory corruption fix to Bluetooth 6lowpan code - Race condition fix in vhci driver - Enhancements to the atusb 802.15.4 driver Please let me know if there are any issues pulling. Thanks. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-25ieee802154: use nla_put_u64_64bit()Nicolas Dichtel
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-23libnl: nla_put_le64(): align on a 64-bit areaNicolas Dichtel
nla_data() is now aligned on a 64-bit area. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-136lowpan: move lowpan_802154_dev to 6lowpanAlexander Aring
This patch moves the 802.15.4 link layer specific structures to generic 6lowpan. This is necessary for special 802.15.4 6lowpan handling in 6lowpan generic layer. Reviewed-by: Stefan Schmidt <stefan@osg.samsung.com> Signed-off-by: Alexander Aring <aar@pengutronix.de> Acked-by: Jukka Rissanen <jukka.rissanen@linux.intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-04-136lowpan: change naming for lowpan private dataAlexander Aring
This patch changes the naming for interface private data for lowpan intefaces. The current private data scheme is: ------------------------------------------------- | 6LoWPAN Generic | LinkLayer 6LoWPAN | ------------------------------------------------- the current naming schemes are: - 6LoWPAN Generic: - lowpan_priv - LinkLayer 6LoWPAN: - BTLE - lowpan_dev - 802.15.4: - lowpan_dev_info the new naming scheme with this patch will be: - 6LoWPAN Generic: - lowpan_dev - LinkLayer 6LoWPAN: - BTLE - lowpan_btle_dev - 802.15.4: - lowpan_802154_dev Signed-off-by: Alexander Aring <aar@pengutronix.de> Reviewed-by: Stefan Schmidt<stefan@osg.samsung.com> Acked-by: Jukka Rissanen <jukka.rissanen@linux.intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-04-13ieee802154: 6lowpan: fix short addr hashAlexander Aring
The short address is unique in combination with the panid. This patch will add the panid for generating an ieee802154 address hash. Reviewed-by: Stefan Schmidt <stefan@osg.samsung.com> Signed-off-by: Alexander Aring <aar@pengutronix.de> Acked-by: Jukka Rissanen <jukka.rissanen@linux.intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-04-13nl802154: avoid address change while running lowpanAlexander Aring
The generation of autoconfigured IPv6 link-local addresses starts with a notification on interface up. To handle autoconfiguration according to RFC 4944 requires pan id and short address to generate an autoconfigured link-local address. This patch will avoid changing of these link-layer address configuration while lowpan interface is up. Reviewed-by: Stefan Schmidt <stefan@osg.samsung.com> Signed-off-by: Alexander Aring <aar@pengutronix.de> Acked-by: Jukka Rissanen <jukka.rissanen@linux.intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-02-23ieee802154: 6lowpan: fix return of netdev notifierAlexander Aring
This patch fixed the return value of netdev notifier. If the command is a don't care a NOTIFY_DONE should be returned. If the command matched a NOTIFY_OK should be returned. Reviewed-by: Stefan Schmidt <stefan@osg.samsung.com> Signed-off-by: Alexander Aring <aar@pengutronix.de> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-02-11sock: struct proto hash function may errorCraig Gallek
In order to support fast reuseport lookups in TCP, the hash function defined in struct proto must be capable of returning an error code. This patch changes the function signature of all related hash functions to return an integer and handles or propagates this return value at all call sites. Signed-off-by: Craig Gallek <kraig@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-05inet: kill unused skb_free opFlorian Westphal
The only user was removed in commit 029f7f3b8701cc7a ("netfilter: ipv6: nf_defrag: avoid/free clone operations"). Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-106lowpan: add lowpan dev register helpersAlexander Aring
This patch introduces register and unregister functionality for lowpan interfaces. While register a lowpan interface there are several things which need to be initialize by the 6lowpan subsystem. Upcoming functionality need to register/unregister per interface components e.g. debugfs entry. Reviewed-by: Stefan Schmidt <stefan@osg.samsung.com> Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-11-02net: fix percpu memory leaksEric Dumazet
This patch fixes following problems : 1) percpu_counter_init() can return an error, therefore init_frag_mem_limit() must propagate this error so that inet_frags_init_net() can do the same up to its callers. 2) If ip[46]_frags_ns_ctl_register() fail, we must unwind properly and free the percpu_counter. Without this fix, we leave freed object in percpu_counters global list (if CONFIG_HOTPLUG_CPU) leading to crashes. This bug was detected by KASAN and syzkaller tool (http://github.com/google/syzkaller) Fixes: 6d7b857d541e ("net: use lib/percpu_counter API for fragmentation mem accounting") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Dmitry Vyukov <dvyukov@google.com> Cc: Hannes Frederic Sowa <hannes@stressinduktion.org> Cc: Jesper Dangaard Brouer <brouer@redhat.com> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-22ieee802154: 6lowpan: fix memory leakAlexander Aring
Looking at current situation of memory management in 6lowpan receive function I detected some invalid handling. After calling lowpan_invoke_rx_handlers we will do a kfree_skb and then NET_RX_DROP on error handling. We don't do this before, also on skb_share_check/skb_unshare which might manipulate the reference counters. After running some 'grep -r "dev_add_pack" net/' to look how others packet-layer receive callbacks works I detected that every subsystem do a kfree_skb, then NET_RX_DROP without calling skb functions which might manipulate the skb reference counters. This is the reason why we should do the same here like all others subsystems. I didn't find any documentation how the packet-layer receive callbacks handle NET_RX_DROP return values either. This patch will add a kfree_skb, then NET_RX_DROP handling for the "trivial checks", in case of skb_share_check/skb_unshare the kfree_skb call will be done inside these functions. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-10-216lowpan: remove lowpan_is_addr_broadcastAlexander Aring
This macro is used at 802.15.4 6LoWPAN only and can be replaced by memcmp with the interface broadcast address. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-10-216lowpan: move IPHC functionality definesAlexander Aring
This patch removes the IPHC related defines for doing bit manipulation from global 6lowpan header to the iphc file which should the only one implementation which use these defines. Also move next header compression defines to their nhc implementation. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-10-216lowpan: cleanup lowpan_header_decompressAlexander Aring
This patch changes the lowpan_header_decompress function by removing inklayer related information from parameters. This is currently for supporting short and extended address for iphc handling in 802154. We don't support short address handling anyway right now, but there exists already code for handling short addresses in lowpan_header_decompress. The address parameters are also changed to a void pointer, so 6LoWPAN linklayer specific code can put complex structures as these parameters and cast it again inside the generic code by evaluating linklayer type before. The order is also changed by destination address at first and then source address, which is the same like all others functions where destination is always the first, memcpy, dev_hard_header, lowpan_header_compress, etc. This patch also moves the fetching of iphc values from 6LoWPAN linklayer specific code into the generic branch. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Acked-by: Jukka Rissanen <jukka.rissanen@linux.intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-10-216lowpan: cleanup lowpan_header_compressAlexander Aring
This patch changes the lowpan_header_compress function by removing unused parameters like "len" and drop static value parameters of protocol type. Instead we really check the protocol type inside inside the skb structure. Also we drop the use of IEEE802154_ADDR_LEN which is link-layer specific. Instead we using EUI64_ADDR_LEN which should always the default case for now. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Acked-by: Jukka Rissanen <jukka.rissanen@linux.intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-10-086lowpan: move shared settings to lowpan_netdev_setupAlexander Aring
This patch moves values for all lowpan interface to the shared implementation of 6lowpan. This patch also quietly fixes the forgotten IFF_NO_QUEUE flag for the bluetooth 6LoWPAN interface. An identically commit is 4afbc0d ("net: 6lowpan: convert to using IFF_NO_QUEUE") which wasn't changed for bluetooth 6lowpan. All 6lowpan interfaces should be virtual with IFF_NO_QUEUE, using EUI64 address length, the mtu size is 1280 (IPV6_MIN_MTU) and the netdev type is ARPHRD_6LOWPAN. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Acked-by: Jukka Rissanen <jukka.rissanen@linux.intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-10-02nl802154: Missing return in nl802154_add_llsec_key()Dan Carpenter
There was a missing return here so it meant that often ieee802154_llsec_parse_key_id() was not called. Fixes: a26c5fd7622d ('nl802154: add support for security layer') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-10-01ieee802154: handle datagram variables as u16Alexander Aring
This reverts commit 9abc378c66e3d6f437eed77c1c534cbc183523f7 ("ieee802154: 6lowpan: change datagram var types"). The reason is that I forgot the IPv6 fragmentation here. Our MTU of lowpan interface is 1280 and skb->len should not above of that. If we reach a payload above 1280 in IPv6 header then we have a IPv6 fragmentation above 802.15.4 6LoWPAN fragmentation. The type "u16" was fine, instead I added now a WARN_ON_ONCE if skb->len is above MTU which should never happen otherwise IPv6 on minimum MTU size is broken. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-09-30ieee802154: 6lowpan: add tx/rx statsAlexander Aring
This patch adds support for increment transmit and receive stats. The meaning of these stats are IPv6 based, which shows the stats after running the 6lowpan adaptation layer (uncompression/compression, fragmentation handling) on receive and before the adaptation layer when transmit. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-09-30ieee802154: 6lowpan: don't skip first dsn while fragmentationAlexander Aring
This patch fixes the data frame sequence numer (dsn) while 6lowpan fragmentation for frag1. Currently we create one 802.15.4 header at first, then check if it's match into one frame and at the end construct many fragments and calling wpan_dev_hard_header for each of them, inclusive for the first fragment. This will make the first generated header to garbage, instead we copying this header for frag1 instead of generate a new one which skips one dsn. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-09-30ieee802154: 6lowpan: change datagram var typesAlexander Aring
This patch changes datagram size variable from u16 type to unsigned int. The reason is that an IPv6 header has an MAX_UIN16 payload length, but the datagram size is payload + IPv6 header length. This avoids overflows at some places. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-09-30ieee802154: change mtu size behaviourAlexander Aring
This patch changes the mtu size of 802.15.4 interfaces. The current setting is the meaning of the maximum transport unit with mac header, which is 127 bytes according 802.15.4. The linux meaning of the mtu size field is the maximum payload of a mac frame. Like in ethernet, which is 1500 bytes. We have dynamic length of mac frames in 802.15.4, this is why we assume the minimum header length which is hard_header_len. This contains fc and sequence fields. These can evaluated by driver layer without additional checks. We currently don't support to set the FCS from userspace, so we need to subtract this from mtu size as well. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-09-30nl802154: add support for security layerAlexander Aring
This patch adds support for accessing mac802154 llsec implementation over nl802154. I added for a new Kconfig entry to provide this functionality CONFIG_IEEE802154_NL802154_EXPERIMENTAL. This interface is still in development. It provides to change security parameters and add/del/dump entries of security tables. Later we can add also a get to get an entry by unique identifier. Cc: Phoebe Buckheister <phoebe.buckheister@itwm.fraunhofer.de> Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-09-30nl802154: use nla_get_le64 for get extended addrAlexander Aring
This patch uses the nla_get_le64 function instead of doing a force converting to le64. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-09-22ieee802154: change needed headroom/tailroomAlexander Aring
This patch cleanups needed_headroom, needed_tailroom and hard_header_len fields for wpan and lowpan interfaces. For wpan interfaces the worst case mac header len should be part of needed_headroom, currently this is set as hard_header_len, but hard_header_len should be set to the minimum header length which xmit call assumes and this is the minimum frame length of 802.15.4. The hard_header_len value will check inside send callbacl of AF_PACKET raw sockets. For lowpan interfaces, if fragmentation isn't needed the skb will call dev_hard_header for 802154 layer and queue it afterwards. This happens without new skb allocation, so we need the same headroom and tailroom lengths like 802154 inside 802154 6lowpan layer. At least we assume as minimum header length an ipv6 header size. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-09-22ieee802154: introduce wpan_dev_header_opsAlexander Aring
The current header_ops callback structure of net device are used mostly from 802.15.4 upper-layers. Because this callback structure is a very generic one, which is also used by e.g. DGRAM AF_PACKET sockets, we can't make this callback structure 802.15.4 specific which is currently is. I saw the smallest "constraint" for calling this callback with dev_hard_header/dev_parse_header by AF_PACKET which assign a 8 byte array for address void pointers. Currently 802.15.4 specific protocols like af802154 and 6LoWPAN will assign the "struct ieee802154_addr" as these parameters which is greater than 8 bytes. The current callback implementation for header_ops.create assumes always a complete "struct ieee802154_addr" which AF_PACKET can't never handled and is greater than 8 bytes. For that reason we introduce now a "generic" create/parse header_ops callback which allows handling with intra-pan extended addresses only. This allows a small use-case with AF_PACKET to send "somehow" a valid dataframe over DGRAM. To keeping the current dev_hard_header behaviour we introduce a similar callback structure "wpan_dev_header_ops" which contains 802.15.4 specific upper-layer header creation functionality, which can be called by wpan_dev_hard_header. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-09-22ieee802154: header_ops: fix frame control settingAlexander Aring
Sometimes upper-layer protocols wants to generate a new mac header by filling "struct ieee802154_hdr" only. These upper-layers sets for the address settings the source and dest fields, but not the fc fields for indicate the source and dest address mode. This patch changes the "ieee802154_hdr_push" function so the fc address fields are set according the source and dest fields of "struct ieee802154_hdr". Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-09-17ieee802154: 6lowpan: use correct ESC value for dispatchStefan Schmidt
The ESC dispatch value has some history and it originally was 0x7f in rfc4944 (see section-5.1). With the release of rfc6282 this value got part of the LOWPAN_IPHC range and was no longer available for ESC. Instead 0x40 was used as replacement (see section-2 in rfc6282). We have been checking the dispatch byte in an order where IPHC would always be evaluated before ESC and thus we would never reach the ESC check as the IPHC range already covers this value. Signed-off-by: Stefan Schmidt <stefan@osg.samsung.com> Acked-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-09-17ieee802154: 6lowpan: fix drop return valueAlexander Aring
This patch changes the return value of lowpan packet receive handler to the correct NET_RX_DROP instead RX_DROP. This issue was detected by sparse and reported from Marcel: net/ieee802154/6lowpan/rx.c:329:32: expected int net/ieee802154/6lowpan/rx.c:329:32: got restricted lowpan_rx_result ... Reported-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-09-17ieee802154: 6lowpan: remove tx full-size calc workaroundAlexander Aring
This patch removes a workaround for datagram_size calculation while doing fragmentation on transmit. Reviewed-by: Stefan Schmidt <stefan@osg.samsung.com> Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-09-17ieee802154: 6lowpan: remove packet type to hostAlexander Aring
This patch remove the packet_type to host and leave the mac pkt_type. By running 'grep -r "pkt_type" net/ipv6', the IPv6 stack will evaluate this value for PACKET_BROADCAST. Instead of overwriting this value we will leave the mac value there which is broadcasts if the mac frame was a broadcast frame. Reviewed-by: Stefan Schmidt <stefan@osg.samsung.com> Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-09-17ieee802154: 6lowpan: check on valid 802.15.4 frameAlexander Aring
This patch adds frame control checks to check if the received frame is something which could contain a 6LoWPAN packet. Reviewed-by: Stefan Schmidt <stefan@osg.samsung.com> Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-09-17ieee802154: 6lowpan: add check for reserved dispatchAlexander Aring
This patch adds checks for reserved dispatch value. When we have a reserved dispatch value we should drop the skb immediately. Reviewed-by: Stefan Schmidt <stefan@osg.samsung.com> Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-09-17ieee802154: 6lowpan: add handler for all dispatch valuesAlexander Aring
This patch adds dummy handlers for all known IEEE 802.15.4 dispatch values which prints a warning that we don't support these dispatches right now. Also we add a warning to the RX_CONTINUE case inside of lowpan_rx_handlers_result which should now never happend. Reviewed-by: Stefan Schmidt <stefan@osg.samsung.com> Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-09-17ieee802154: 6lowpan: add generic lowpan header checkAlexander Aring
This patch introduce an earlier check if a 6LoWPAN frame can be valid. This contains at first for checking if the header contains a dispatch byte and isn't the nalp dispatch value, which means it isn't a 6LoWPAN packet. Also we add a check if we can derference the dispatch value by checking if skb->len is unequal zero. Reviewed-by: Stefan Schmidt <stefan@osg.samsung.com> Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>