summaryrefslogtreecommitdiff
path: root/net/ethtool
AgeCommit message (Collapse)Author
2021-02-11net: hsr: add offloading supportGeorge McCollister
Add support for offloading of HSR/PRP (IEC 62439-3) tag insertion tag removal, duplicate generation and forwarding. For HSR, insertion involves the switch adding a 6 byte HSR header after the 14 byte Ethernet header. For PRP it adds a 6 byte trailer. Tag removal involves automatically stripping the HSR/PRP header/trailer in the switch. This is possible when the switch also performs auto deduplication using the HSR/PRP header/trailer (making it no longer required). Forwarding involves automatically forwarding between redundant ports in an HSR. This is crucial because delay is accumulated as a frame passes through each node in the ring. Duplication involves the switch automatically sending a single frame from the CPU port to both redundant ports. This is required because the inserted HSR/PRP header/trailer must contain the same sequence number on the frames sent out both redundant ports. Export is_hsr_master so DSA can tell them apart from other devices in dsa_slave_changeupper. Signed-off-by: George McCollister <george.mccollister@gmail.com> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-03ethtool: Expose the number of lanes in useDanielle Ratson
Currently, ethtool does not expose how many lanes are used when the link is up. After adding a possibility to advertise or force a specific number of lanes, the lanes in use value can be either the maximum width of the port or below. Extend ethtool to expose the number of lanes currently in use for drivers that support it. For example: $ ethtool -s swp1 speed 100000 lanes 4 $ ethtool -s swp2 speed 100000 lanes 4 $ ip link set swp1 up $ ip link set swp2 up $ ethtool swp1 Settings for swp1: Supported ports: [ FIBRE Backplane ] Supported link modes: 1000baseT/Full 10000baseT/Full 1000baseKX/Full 10000baseKR/Full 10000baseR_FEC 40000baseKR4/Full 40000baseCR4/Full 40000baseSR4/Full 40000baseLR4/Full 25000baseCR/Full 25000baseKR/Full 25000baseSR/Full 50000baseCR2/Full 50000baseKR2/Full 100000baseKR4/Full 100000baseSR4/Full 100000baseCR4/Full 100000baseLR4_ER4/Full 50000baseSR2/Full 10000baseCR/Full 10000baseSR/Full 10000baseLR/Full 10000baseER/Full 50000baseKR/Full 50000baseSR/Full 50000baseCR/Full 50000baseLR_ER_FR/Full 50000baseDR/Full 100000baseKR2/Full 100000baseSR2/Full 100000baseCR2/Full 100000baseLR2_ER2_FR2/Full 100000baseDR2/Full 200000baseKR4/Full 200000baseSR4/Full 200000baseLR4_ER4_FR4/Full 200000baseDR4/Full 200000baseCR4/Full Supported pause frame use: Symmetric Receive-only Supports auto-negotiation: Yes Supported FEC modes: Not reported Advertised link modes: 1000baseT/Full 10000baseT/Full 1000baseKX/Full 1000baseKX/Full 10000baseKR/Full 10000baseR_FEC 40000baseKR4/Full 40000baseCR4/Full 40000baseSR4/Full 40000baseLR4/Full 25000baseCR/Full 25000baseKR/Full 25000baseSR/Full 50000baseCR2/Full 50000baseKR2/Full 100000baseKR4/Full 100000baseSR4/Full 100000baseCR4/Full 100000baseLR4_ER4/Full 50000baseSR2/Full 10000baseCR/Full 10000baseSR/Full 10000baseLR/Full 10000baseER/Full 200000baseKR4/Full 200000baseSR4/Full 200000baseLR4_ER4_FR4/Full 200000baseDR4/Full 200000baseCR4/Full Advertised pause frame use: No Advertised auto-negotiation: Yes Advertised FEC modes: Not reported Advertised link modes: 100000baseKR4/Full 100000baseSR4/Full 100000baseCR4/Full 100000baseLR4_ER4/Full Advertised pause frame use: No Advertised auto-negotiation: Yes Advertised FEC modes: Not reported Speed: 100000Mb/s Lanes: 4 Duplex: Full Auto-negotiation: on Port: Direct Attach Copper PHYAD: 0 Transceiver: internal Link detected: yes Signed-off-by: Danielle Ratson <danieller@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-03ethtool: Get link mode in use instead of speed and duplex parametersDanielle Ratson
Currently, when user space queries the link's parameters, as speed and duplex, each parameter is passed from the driver to ethtool. Instead, get the link mode bit in use, and derive each of the parameters from it in ethtool. Signed-off-by: Danielle Ratson <danieller@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-03ethtool: Extend link modes settings uAPI with lanesDanielle Ratson
Currently, when auto negotiation is on, the user can advertise all the linkmodes which correspond to a specific speed, but does not have a similar selector for the number of lanes. This is significant when a specific speed can be achieved using different number of lanes. For example, 2x50 or 4x25. Add 'ETHTOOL_A_LINKMODES_LANES' attribute and expand 'struct ethtool_link_settings' with lanes field in order to implement a new lanes-selector that will enable the user to advertise a specific number of lanes as well. When auto negotiation is off, lanes parameter can be forced only if the driver supports it. Add a capability bit in 'struct ethtool_ops' that allows ethtool know if the driver can handle the lanes parameter when auto negotiation is off, so if it does not, an error message will be returned when trying to set lanes. Example: $ ethtool -s swp1 lanes 4 $ ethtool swp1 Settings for swp1: Supported ports: [ FIBRE ] Supported link modes: 1000baseKX/Full 10000baseKR/Full 40000baseCR4/Full 40000baseSR4/Full 40000baseLR4/Full 25000baseCR/Full 25000baseSR/Full 50000baseCR2/Full 100000baseSR4/Full 100000baseCR4/Full Supported pause frame use: Symmetric Receive-only Supports auto-negotiation: Yes Supported FEC modes: Not reported Advertised link modes: 40000baseCR4/Full 40000baseSR4/Full 40000baseLR4/Full 100000baseSR4/Full 100000baseCR4/Full Advertised pause frame use: No Advertised auto-negotiation: Yes Advertised FEC modes: Not reported Speed: Unknown! Duplex: Unknown! (255) Auto-negotiation: on Port: Direct Attach Copper PHYAD: 0 Transceiver: internal Link detected: no Signed-off-by: Danielle Ratson <danieller@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-03ethtool: Validate master slave configuration before rtnl_lock()Danielle Ratson
Create a new function for input validations to be called before rtnl_lock() and move the master slave validation to that function. This would be a cleanup for next patch that would add another validation to the new function. Signed-off-by: Danielle Ratson <danieller@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-23net: introduce a netdev feature for UDP GRO forwardingAlexander Lobakin
Introduce a new netdev feature, NETIF_F_GRO_UDP_FWD, to allow user to turn UDP GRO on and off for forwarding. Defaults to off to not change current datapath. Suggested-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Alexander Lobakin <alobakin@pm.me> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-16ethtool: fix error paths in ethnl_set_channels()Ivan Vecera
Fix two error paths in ethnl_set_channels() to avoid lock-up caused but unreleased RTNL. Fixes: e19c591eafad ("ethtool: set device channel counts with CHANNELS_SET request") Reported-by: LiLiang <liali@redhat.com> Signed-off-by: Ivan Vecera <ivecera@redhat.com> Reviewed-by: Michal Kubecek <mkubecek@suse.cz> Link: https://lore.kernel.org/r/20201215090810.801777-1-ivecera@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-16ethtool: fix string set id checkMichal Kubecek
Syzbot reported a shift of a u32 by more than 31 in strset_parse_request() which is undefined behavior. This is caused by range check of string set id using variable ret (which is always 0 at this point) instead of id (string set id from request). Fixes: 71921690f974 ("ethtool: provide string sets with STRSET_GET request") Reported-by: syzbot+96523fb438937cd01220@syzkaller.appspotmail.com Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Link: https://lore.kernel.org/r/b54ed5c5fd972a59afea3e1badfb36d86df68799.1607952208.git.mkubecek@suse.cz Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-11Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
xdp_return_frame_bulk() needs to pass a xdp_buff to __xdp_return(). strlcpy got converted to strscpy but here it makes no functional difference, so just keep the right code. Conflicts: net/netfilter/nf_tables_api.c Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-09ethtool: fix stack overflow in ethnl_parse_bitset()Michal Kubecek
Syzbot reported a stack overflow in bitmap_from_arr32() called from ethnl_parse_bitset() when bitset from netlink message is longer than target bitmap length. While ethnl_compact_sanity_checks() makes sure that trailing part is all zeros (i.e. the request does not try to touch bits kernel does not recognize), we also need to cap change_bits to nbits so that we don't try to write past the prepared bitmaps. Fixes: 88db6d1e4f62 ("ethtool: add ethnl_parse_bitset() helper") Reported-by: syzbot+9d39fa49d4df294aab93@syzkaller.appspotmail.com Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Link: https://lore.kernel.org/r/3487ee3a98e14cd526f55b6caaa959d2dcbcad9f.1607465316.git.mkubecek@suse.cz Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-12Merge https://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-09ethtool: netlink: add missing netdev_features_change() callAlexander Lobakin
After updating userspace Ethtool from 5.7 to 5.9, I noticed that NETDEV_FEAT_CHANGE is no more raised when changing netdev features through Ethtool. That's because the old Ethtool ioctl interface always calls netdev_features_change() at the end of user request processing to inform the kernel that our netdevice has some features changed, but the new Netlink interface does not. Instead, it just notifies itself with ETHTOOL_MSG_FEATURES_NTF. Replace this ethtool_notify() call with netdev_features_change(), so the kernel will be aware of any features changes, just like in case with the ioctl interface. This does not omit Ethtool notifications, as Ethtool itself listens to NETDEV_FEAT_CHANGE and drops ETHTOOL_MSG_FEATURES_NTF on it (net/ethtool/netlink.c:ethnl_netdev_event()). From v1 [1]: - dropped extra new line as advised by Jakub; - no functional changes. [1] https://lore.kernel.org/netdev/AlZXQ2o5uuTVHCfNGOiGgJ8vJ3KgO5YIWAnQjH0cDE@cp3-web-009.plabs.ch Fixes: 0980bfcd6954 ("ethtool: set netdev features with FEATURES_SET request") Signed-off-by: Alexander Lobakin <alobakin@pm.me> Reviewed-by: Michal Kubecek <mkubecek@suse.cz> Link: https://lore.kernel.org/r/ahA2YWXYICz5rbUSQqNG4roJ8OlJzzYQX7PTiG80@cp4-web-028.plabs.ch Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-02ethtool: remove unneeded semicolonTom Rix
A semicolon is not needed after a switch statement. Signed-off-by: Tom Rix <trix@redhat.com> Link: https://lore.kernel.org/r/20201101155601.2294374-1-trix@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-08ethtool: correct policy for ETHTOOL_MSG_CHANNELS_SETJohannes Berg
This accidentally got wired up to the *get* policy instead of the *set* policy, causing operations to be rejected. Fix it by wiring up the correct policy instead. Fixes: 5028588b62cb ("ethtool: wire up set policies to ops") Reported-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Tested-by: Leon Romanovsky <leonro@nvidia.com> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-08ethtool: strset: allow ETHTOOL_A_STRSET_COUNTS_ONLY attrJohannes Berg
The ETHTOOL_A_STRSET_COUNTS_ONLY flag attribute was previously not allowed to be used, but now due to the policy size reduction we would access the tb[] array out of bounds since we tried to check for the attribute despite it not being accepted. Fix both issues by adding it correctly to the appropriate policy. Fixes: ff419afa4310 ("ethtool: trim policy tables") Fixes: 71921690f974 ("ethtool: provide string sets with STRSET_GET request") Reported-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Tested-by: Leon Romanovsky <leonro@nvidia.com> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-06ethtool: specify which header flags are supported per commandJakub Kicinski
Perform header flags validation through the policy. Only pause command supports ETHTOOL_FLAG_STATS. Create a separate policy to be able to express that in policy dumps to user space. Note that even though the core will validate the header policy, it cannot record multiple layers of attributes and we have to re-parse header sub-attrs. When doing so we could skip attribute validation, or use most permissive policy. Opt for the former. We will no longer return the extack cookie for flags but since we only added first new flag in this release it's not expected that any user space had a chance to make use of it. v2: - remove the re-validation in ethnl_parse_header_dev_get() Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-10-06ethtool: link up ethnl_header_policy as a nested policyJakub Kicinski
To get the most out of parsing by the core, and to allow dumping full policies we need to specify which policy applies to nested attrs. For headers it's ethnl_header_policy. $ sed -i 's@\(ETHTOOL_A_.*HEADER\].*=\) { .type = NLA_NESTED },@\1\n\t\tNLA_POLICY_NESTED(ethnl_header_policy),@' net/ethtool/* Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-10-06ethtool: trim policy tablesJakub Kicinski
Since ethtool uses strict attribute validation there's no need to initialize all attributes in policy tables. 0 is NLA_UNSPEC which is going to be rejected. Remove the NLA_REJECTs. Similarly attributes above maxattrs are rejected, so there's no need to always size the policy tables to ETHTOOL_A_..._MAX. v2: - new patch Suggested-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-10-06ethtool: wire up set policies to opsJakub Kicinski
Similarly to get commands wire up the policies of set commands to get parsing by the core and policy dumps. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-10-06ethtool: wire up get policies to opsJakub Kicinski
Wire up policies for get commands in struct nla_policy of the ethtool family. Make use of genetlink code attr validation and parsing, as well as allow dumping policies to user space. For every ETHTOOL_MSG_*_GET: - add 'ethnl_' prefix to policy name - add extern declaration in net/ethtool/netlink.h - wire up the policy & attr in ethtool_genl_ops[]. - remove .request_policy and .max_attr from ethnl_request_ops. Obviously core only records the first "layer" of parsed attrs so we still need to parse the sub-attrs of the nested header attribute. v2: - merge of patches 1 and 2 from v1 - remove stray empty lines in ops - also remove .max_attr Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-10-06ethtool: allow netdev driver to define phy tunablesIgor Russkikh
Define get/set phy tunable callbacks in ethtool ops. This will allow MAC drivers with integrated PHY still to implement these tunables. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-10-05Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller
Rejecting non-native endian BTF overlapped with the addition of support for it. The rest were more simple overlapping changes, except the renesas ravb binding update, which had to follow a file move as well as a YAML conversion. Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-28ethtool: mark netlink family as __ro_after_initJakub Kicinski
Like all genl families ethtool_genl_family needs to not be a straight up constant, because it's modified/initialized by genl_register_family(). After init, however, it's only passed to genlmsg_put() & co. therefore we can mark it as __ro_after_init. Since genl_family structure contains function pointers mark this as a fix. Fixes: 2b4a8990b7df ("ethtool: introduce ethtool netlink interface") Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller
Two minor conflicts: 1) net/ipv4/route.c, adding a new local variable while moving another local variable and removing it's initial assignment. 2) drivers/net/dsa/microchip/ksz9477.c, overlapping changes. One pretty prints the port mode differently, whilst another changes the driver to try and obtain the port mode from the port node rather than the switch node. Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-19ethtool: Add 100base-FX link mode entriesDan Murphy
Add entries for the 100base-FX full and half duplex supported modes. $ ethtool eth0 Supported ports: [ FIBRE ] Supported link modes: 100baseFX/Half 100baseFX/Full Supported pause frame use: Symmetric Receive-only Supports auto-negotiation: No Supported FEC modes: Not reported Advertised link modes: 100baseFX/Half 100baseFX/Full Advertised pause frame use: No Advertised auto-negotiation: No Advertised FEC modes: Not reported Speed: 100Mb/s Duplex: Full Auto-negotiation: off Port: MII PHYAD: 1 Transceiver: external Supports Wake-on: gs Wake-on: d SecureOn password: 00:00:00:00:00:00 Current message level: 0x00000000 (0) Link detected: yes Signed-off-by: Dan Murphy <dmurphy@ti.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-17ethtool: add and use message type for tunnel info replyMichal Kubecek
Tunnel offload info code uses ETHTOOL_MSG_TUNNEL_INFO_GET message type (cmd field in genetlink header) for replies to tunnel info netlink request, i.e. the same value as the request have. This is a problem because we are using two separate enums for userspace to kernel and kernel to userspace message types so that this ETHTOOL_MSG_TUNNEL_INFO_GET (28) collides with ETHTOOL_MSG_CABLE_TEST_TDR_NTF which is what message type 28 means for kernel to userspace messages. As the tunnel info request reached mainline in 5.9 merge window, we should still be able to fix the reply message type without breaking backward compatibility. Fixes: c7d759eb7b12 ("ethtool: add tunnel info interface") Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-15ethtool: add standard pause statsJakub Kicinski
Currently drivers have to report their pause frames statistics via ethtool -S, and there is a wide variety of names used for these statistics. Add the two statistics defined in IEEE 802.3x to the standard API. Create a new ethtool request header flag for including statistics in the response to GET commands. Always create the ETHTOOL_A_PAUSE_STATS nest in replies when flag is set. Testing if driver declares the op is not a reliable way of checking if any stats will actually be included and therefore we don't want to give the impression that presence of ETHTOOL_A_PAUSE_STATS indicates driver support. Note that this patch does not include PFC counters, which may fit better in dcbnl? But mostly I don't need them/have a setup to test them so I haven't looked deeply into exposing them :) v3: - add a helper for "uninitializing" stats, rather than a cryptic memset() (Andrew) Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-03ethtool: fix error handling in ethtool_phys_idEdward Cree
If ops->set_phys_id() returned an error, previously we would only break out of the inner loop, which neither stopped the outer loop nor returned the error to the user (since 'rc' would be overwritten on the next pass through the loop). Thus, rewrite it to use a single loop, so that the break does the right thing. Use u64 for 'count' and 'i' to prevent overflow in case of (unreasonably) large values of id.data and n. Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-01Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextDavid S. Miller
Daniel Borkmann says: ==================== pull-request: bpf-next 2020-09-01 The following pull-request contains BPF updates for your *net-next* tree. There are two small conflicts when pulling, resolve as follows: 1) Merge conflict in tools/lib/bpf/libbpf.c between 88a82120282b ("libbpf: Factor out common ELF operations and improve logging") in bpf-next and 1e891e513e16 ("libbpf: Fix map index used in error message") in net-next. Resolve by taking the hunk in bpf-next: [...] scn = elf_sec_by_idx(obj, obj->efile.btf_maps_shndx); data = elf_sec_data(obj, scn); if (!scn || !data) { pr_warn("elf: failed to get %s map definitions for %s\n", MAPS_ELF_SEC, obj->path); return -EINVAL; } [...] 2) Merge conflict in drivers/net/ethernet/mellanox/mlx5/core/en/xsk/rx.c between 9647c57b11e5 ("xsk: i40e: ice: ixgbe: mlx5: Test for dma_need_sync earlier for better performance") in bpf-next and e20f0dbf204f ("net/mlx5e: RX, Add a prefetch command for small L1_CACHE_BYTES") in net-next. Resolve the two locations by retaining net_prefetch() and taking xsk_buff_dma_sync_for_cpu() from bpf-next. Should look like: [...] xdp_set_data_meta_invalid(xdp); xsk_buff_dma_sync_for_cpu(xdp, rq->xsk_pool); net_prefetch(xdp->data); [...] We've added 133 non-merge commits during the last 14 day(s) which contain a total of 246 files changed, 13832 insertions(+), 3105 deletions(-). The main changes are: 1) Initial support for sleepable BPF programs along with bpf_copy_from_user() helper for tracing to reliably access user memory, from Alexei Starovoitov. 2) Add BPF infra for writing and parsing TCP header options, from Martin KaFai Lau. 3) bpf_d_path() helper for returning full path for given 'struct path', from Jiri Olsa. 4) AF_XDP support for shared umems between devices and queues, from Magnus Karlsson. 5) Initial prep work for full BPF-to-BPF call support in libbpf, from Andrii Nakryiko. 6) Generalize bpf_sk_storage map & add local storage for inodes, from KP Singh. 7) Implement sockmap/hash updates from BPF context, from Lorenz Bauer. 8) BPF xor verification for scalar types & add BPF link iterator, from Yonghong Song. 9) Use target's prog type for BPF_PROG_TYPE_EXT prog verification, from Udip Pant. 10) Rework BPF tracing samples to use libbpf loader, from Daniel T. Lee. 11) Fix xdpsock sample to really cycle through all buffers, from Weqaar Janjua. 12) Improve type safety for tun/veth XDP frame handling, from Maciej Żenczykowski. 13) Various smaller cleanups and improvements all over the place. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-31xsk: i40e: ice: ixgbe: mlx5: Rename xsk zero-copy driver interfacesMagnus Karlsson
Rename the AF_XDP zero-copy driver interface functions to better reflect what they do after the replacement of umems with buffer pools in the previous commit. Mostly it is about replacing the umem name from the function names with xsk_buff and also have them take the a buffer pool pointer instead of a umem. The various ring functions have also been renamed in the process so that they have the same naming convention as the internal functions in xsk_queue.h. This so that it will be clearer what they do and also for consistency. Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Björn Töpel <bjorn.topel@intel.com> Link: https://lore.kernel.org/bpf/1598603189-32145-3-git-send-email-magnus.karlsson@intel.com
2020-08-31xsk: i40e: ice: ixgbe: mlx5: Pass buffer pool to driver instead of umemMagnus Karlsson
Replace the explicit umem reference passed to the driver in AF_XDP zero-copy mode with the buffer pool instead. This in preparation for extending the functionality of the zero-copy mode so that umems can be shared between queues on the same netdev and also between netdevs. In this commit, only an umem reference has been added to the buffer pool struct. But later commits will add other entities to it. These are going to be entities that are different between different queue ids and netdevs even though the umem is shared between them. Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Björn Töpel <bjorn.topel@intel.com> Link: https://lore.kernel.org/bpf/1598603189-32145-2-git-send-email-magnus.karlsson@intel.com
2020-08-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller
2020-08-20ethtool: allow flow-type ether without IP protocol fieldVishal Kulkarni
Set IP protocol mask only when IP protocol field is set. This will allow flow-type ether with vlan rule which don't have protocol field to apply. ethtool -N ens5f4 flow-type ether proto 0x8100 vlan 0x600\ m 0x1FFF action 3 loc 16 Signed-off-by: Vishal Kulkarni <vishal@chelsio.com> Reviewed-by: Michal Kubecek <mkubecek@suse.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-18ethtool: Don't omit the netlink reply if no features were changedMaxim Mikityanskiy
The legacy ethtool userspace tool shows an error when no features could be changed. It's useful to have a netlink reply to be able to show this error when __netdev_update_features wasn't called, for example: 1. ethtool -k eth0 large-receive-offload: off 2. ethtool -K eth0 rx-fcs on 3. ethtool -K eth0 lro on Could not change any device features rx-lro: off [requested on] 4. ethtool -K eth0 lro on # The output should be the same, but without this patch the kernel # doesn't send the reply, and ethtool is unable to detect the error. This commit makes ethtool-netlink always return a reply when requested, and it still avoids unnecessary calls to __netdev_update_features if the wanted features haven't changed. Fixes: 0980bfcd6954 ("ethtool: set netdev features with FEATURES_SET request") Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com> Reviewed-by: Michal Kubecek <mkubecek@suse.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-18ethtool: Account for hw_features in netlink interfaceMaxim Mikityanskiy
ethtool-netlink ignores dev->hw_features and may confuse the drivers by asking them to enable features not in the hw_features bitmask. For example: 1. ethtool -k eth0 tls-hw-tx-offload: off [fixed] 2. ethtool -K eth0 tls-hw-tx-offload on tls-hw-tx-offload: on 3. ethtool -k eth0 tls-hw-tx-offload: on [fixed] Fitler out dev->hw_features from req_wanted to fix it and to resemble the legacy ethtool behavior. Fixes: 0980bfcd6954 ("ethtool: set netdev features with FEATURES_SET request") Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com> Reviewed-by: Michal Kubecek <mkubecek@suse.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-18ethtool: Fix preserving of wanted feature bits in netlink interfaceMaxim Mikityanskiy
Currently, ethtool-netlink calculates new wanted bits as: (req_wanted & req_mask) | (old_active & ~req_mask) It completely discards the old wanted bits, so they are forgotten with the next ethtool command. Sample steps to reproduce: 1. ethtool -k eth0 tx-tcp-segmentation: on # TSO is on from the beginning 2. ethtool -K eth0 tx off tx-tcp-segmentation: off [not requested] 3. ethtool -k eth0 tx-tcp-segmentation: off [requested on] 4. ethtool -K eth0 rx off # Some change unrelated to TSO 5. ethtool -k eth0 tx-tcp-segmentation: off # "Wanted on" is forgotten This commit fixes it by changing the formula to: (req_wanted & req_mask) | (old_wanted & ~req_mask), where old_active was replaced by old_wanted to account for the wanted bits. The shortcut condition for the case where nothing was changed now compares wanted bitmasks, instead of wanted to active. Fixes: 0980bfcd6954 ("ethtool: set netdev features with FEATURES_SET request") Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com> Reviewed-by: Michal Kubecek <mkubecek@suse.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-03Merge tag 'mlx5-updates-2020-08-03' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahameed says: ==================== mlx5-updates-2020-08-03 This patchset introduces some updates to mlx5 driver. 1) Jakub converts mlx5 to use the new udp tunnel infrastructure. Starting with a hack to allow drivers to request a static configuration of the default vxlan port, and then a patch that converts mlx5. 2) Parav implements change_carrier ndo for VF eswitch representors, to speedup link state control of representors netdevices. 3) Alex Vesker, makes a simple update to software steering to fix an issue with push vlan action sequence 4) Leon removes a redundant dump stack on error flow. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-03ethtool: ethnl_set_linkmodes: remove redundant null checkGaurav Singh
info cannot be NULL here since its being accessed earlier in the function: nlmsg_parse(info->nlhdr...). Remove this redundant NULL check. Signed-off-by: Gaurav Singh <gaurav1086@gmail.com> Reviewed-by: Michal Kubecek <mkubecek@suse.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-03udp_tunnel: add the ability to hard-code IANA VXLANJakub Kicinski
mlx5 has the IANA VXLAN port (4789) hard coded by the device, instead of being added dynamically when tunnels are created. To support this add a workaround flag to struct udp_tunnel_nic_info. Skipping updates for the port is fairly trivial, dumping the hard coded port via ethtool requires some code duplication. The port is not a part of any real table, we dump it in a special table which has no tunnel types supported and only one entry. This is the last known workaround / hack needed to convert all drivers to the new infra. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-07-11Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller
All conflicts seemed rather trivial, with some guidance from Saeed Mameed on the tc_ct.c one. Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-10ethtool: add tunnel info interfaceJakub Kicinski
Add an interface to report offloaded UDP ports via ethtool netlink. Now that core takes care of tracking which UDP tunnel ports the NICs are aware of we can quite easily export this information out to user space. The responsibility of writing the netlink dumps is split between ethtool code and udp_tunnel_nic.c - since udp_tunnel module may not always be loaded, yet we should always report the capabilities of the NIC. $ ethtool --show-tunnels eth0 Tunnel information for eth0: UDP port table 0: Size: 4 Types: vxlan No entries UDP port table 1: Size: 4 Types: geneve, vxlan-gpe Entries (1): port 1230, vxlan-gpe v4: - back to v2, build fix is now directly in udp_tunnel.h v3: - don't compile ETHTOOL_MSG_TUNNEL_INFO_GET in if CONFIG_INET not set. v2: - fix string set count, - reorder enums in the uAPI, - fix type of ETHTOOL_A_TUNNEL_UDP_TABLE_TYPES to bitset in docs and comments. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-09ethtool: fix genlmsg_put() failure handling in ethnl_default_dumpit()Michal Kubecek
If the genlmsg_put() call in ethnl_default_dumpit() fails, we bail out without checking if we already have some messages in current skb like we do with ethnl_default_dump_one() failure later. Therefore if existing messages almost fill up the buffer so that there is not enough space even for netlink and genetlink header, we lose all prepared messages and return and error. Rather than duplicating the skb->len check, move the genlmsg_put(), genlmsg_cancel() and genlmsg_end() calls into ethnl_default_dump_one(). This is also more logical as all message composition will be in ethnl_default_dump_one() and only iteration logic will be left in ethnl_default_dumpit(). Fixes: 728480f12442 ("ethtool: default handlers for GET requests") Reported-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-08ethtool: Add support for 100Gbps per lane link modesMeir Lichtinger
Define 100G, 200G and 400G link modes using 100Gbps per lane LR, ER and FR are defined as a single link mode because they are using same technology and by design are fully interoperable. EEPROM content indicates if the module is LR, ER, or FR, and the user space ethtool decoder is planned to support decoding these modes in the EEPROM. Signed-off-by: Meir Lichtinger <meirl@mellanox.com> CC: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Aya Levin <ayal@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-08net: phy: Uninline PHY ethtool statistics operationsFlorian Fainelli
Now that we have moved the PHY ethtool statistics to be dynamically registered, we no longer need to inline those for ethtool. This used to be done to avoid cross symbol referencing and allow ethtool to be decoupled from PHYLIB entirely. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-07net: ethtool: Remove PHYLIB direct dependencyFlorian Fainelli
Now that we have introduced ethtool_phy_ops and the PHY library dynamically registers its operations with that function pointer, we can remove the direct PHYLIB dependency in favor of using dynamic operations. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-07net: ethtool: Introduce ethtool_phy_opsFlorian Fainelli
In order to decouple ethtool from its PHY library dependency, define an ethtool_phy_ops singleton which can be overriden by the PHY library when it loads with an appropriate set of function pointers. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-29ethtool: Add link extended stateAmit Cohen
Currently, drivers can only tell whether the link is up/down using LINKSTATE_GET, but no additional information is given. Add attributes to LINKSTATE_GET command in order to allow drivers to expose the user more information in addition to link state to ease the debug process, for example, reason for link down state. Extended state consists of two attributes - link_ext_state and link_ext_substate. The idea is to avoid 'vendor specific' states in order to prevent drivers to use specific link_ext_state that can be in the future common link_ext_state. The substates allows drivers to add more information to the common link_ext_state. For example, vendor can expose 'Autoneg' as link_ext_state and add 'No partner detected during force mode' as link_ext_substate. If a driver cannot pinpoint the extended state with the substate accuracy, it is free to expose only the extended state and omit the substate attribute. Signed-off-by: Amit Cohen <amitc@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-25Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller
Minor overlapping changes in xfrm_device.c, between the double ESP trailing bug fix setting the XFRM_INIT flag and the changes in net-next preparing for bonding encryption support. Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-25ethtool: fix error handling in linkstate_prepare_data()Michal Kubecek
When getting SQI or maximum SQI value fails in linkstate_prepare_data(), we must not return without calling ethnl_ops_complete(dev) as that could result in imbalance between ethtool_ops ->begin() and ->complete() calls. Fixes: 806602191592 ("ethtool: provide UAPI for PHY Signal Quality Index (SQI)") Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-23net: ethtool: Handle missing cable test TDR parametersAndrew Lunn
A last minute change put the TDR cable test parameters into a nest. The validation is not sufficient, resulting in an oops if the nest is missing. Set default values first, then update them if the nest is provided. Fixes: f2bc8ad31a7f ("net: ethtool: Allow PHY cable test TDR data to configured") Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-29 08:35:30 +0000