summaryrefslogtreecommitdiff
path: root/net/dsa/dsa_priv.h
AgeCommit message (Collapse)Author
2017-06-13net: dsa: Introduce dsa_get_cpu_port()Florian Fainelli
Introduce a helper function which will return a reference to the CPU port used in a dsa_switch_tree. Right now this is a singleton, but this will change once we introduce multi-CPU port support, so ease the transition by converting the affected code paths. Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-13net: dsa: Associate slave network device with CPU portFlorian Fainelli
In preparation for supporting multiple CPU ports with DSA, have the dsa_port structure know which CPU it is associated with. This will be important in order to make sure the correct CPU is used for transmission of the frames. If not for functional reasons, for performance (e.g: load balancing) and forwarding decisions. Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-13net: dsa: Remove master_netdev and use dst->cpu_dp->netdevFlorian Fainelli
In preparation for supporting multiple CPU ports, remove dst->master_netdev and ds->master_netdev and replace them with only one instance of the common object we have for a port: struct dsa_port::netdev. ds->master_netdev is currently write only and would be helpful in the case where we have two switches, both with CPU ports, and also connected within each other, which the multi-CPU port patch series would address. While at it, introduce a helper function used in net/dsa/slave.c to immediately get a reference on the master network device called dsa_master_netdev(). Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-04net: dsa: Pass dsa_port reference to ethtool setup/restoreFlorian Fainelli
We do not need to have a reference to a dsa_switch, instead we should pass a reference to a CPU dsa_port, change that. This is a preliminary change to better support multiple CPU ports. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-01net: dsa: comment hot path requirementsVivien Didelot
The DSA layer uses inline helpers and copy of the tagging functions for faster access in hot path. Add comments to detail that. Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-31dsa: add support for Microchip KSZ tail taggingWoojung Huh
Adding support for the Microchip KSZ switch family tail tagging. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Woojung Huh <Woojung.Huh@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-24net: dsa: support cross-chip ageing timeVivien Didelot
Now that the switchdev bridge ageing time attribute is propagated to all switch chips of the fabric, each switch can check if the requested value is valid and program itself, so that the whole fabric shares a common ageing time setting. This is especially needed for switch chips in between others, containing no bridge port members but evidently used in the data path. To achieve that, remove the condition which skips the other switches. We also don't need to identify the target switch anymore, thus remove the sw_index member of the dsa_notifier_ageing_time_info notifier structure. On ZII Dev Rev B (with two 88E6352 and one 88E6185) and ZII Dev Rev C (with two 88E6390X), we have the following hardware configuration: # ip link add name br0 type bridge # ip link set master br0 dev lan6 br0: port 1(lan6) entered blocking state br0: port 1(lan6) entered disabled state # echo 2000 > /sys/class/net/br0/bridge/ageing_time Before this patch: zii-rev-b# cat /sys/kernel/debug/mv88e6xxx/sw*/age_time 300000 300000 15000 zii-rev-c# cat /sys/kernel/debug/mv88e6xxx/sw*/age_time 300000 18750 After this patch: zii-rev-b# cat /sys/kernel/debug/mv88e6xxx/sw*/age_time 15000 15000 15000 zii-rev-c# cat /sys/kernel/debug/mv88e6xxx/sw*/age_time 18750 18750 Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-22net: dsa: add VLAN notifierVivien Didelot
Add two new DSA_NOTIFIER_VLAN_ADD and DSA_NOTIFIER_VLAN_DEL events to notify not only a single switch, but all switches of a the fabric when an VLAN entry is added or removed. For the moment, keep the current behavior and ignore other switches. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-22net: dsa: add MDB notifierVivien Didelot
Add two new DSA_NOTIFIER_MDB_ADD and DSA_NOTIFIER_MDB_DEL events to notify not only a single switch, but all switches of a the fabric when an MDB entry is added or removed. For the moment, keep the current behavior and ignore other switches. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-22net: dsa: add FDB notifierVivien Didelot
Add two new DSA_NOTIFIER_FDB_ADD and DSA_NOTIFIER_FDB_DEL events to notify not only a single switch, but all switches of a the fabric when an FDB entry is added or removed. For the moment, keep the current behavior and ignore other switches. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-22net: dsa: add notifier for ageing timeVivien Didelot
This patch keeps the port-wide ageing time handling code in dsa_port_ageing_time, pushes the requested ageing time value in a new switch fabric notification, and moves the switch-wide ageing time handling code in dsa_switch_ageing_time. This has the effect that now not only the switch that the target port belongs to can be programmed, but all switches composing the switch fabric. For the moment, keep the current behavior and ignore other switches. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-22net: dsa: move notifier info to private headerVivien Didelot
The DSA notifier events and info structure definitions are not meant for DSA drivers and users, but only used internally by the DSA core files. Move them from the public net/dsa.h file to the private dsa_priv.h file. Also use this opportunity to turn the events into an anonymous enum, because we don't care about the values, and this will prevent future conflicts when adding (and sorting) new events. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-22net: dsa: move VLAN handlersVivien Didelot
Move the DSA port code which handles VLAN objects in port.c, where it belongs. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-22net: dsa: move MDB handlersVivien Didelot
Move the DSA port code which handles MDB objects in port.c, where it belongs. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-22net: dsa: move FDB handlersVivien Didelot
Move the DSA port code which handles FDB objects in port.c, where it belongs. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-22net: dsa: move ageing time setterVivien Didelot
Move the DSA port code which sets a port ageing time in port.c, where it belongs. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-22net: dsa: move VLAN filtering setterVivien Didelot
Move the DSA port code which sets VLAN filtering on a port in port.c, where it belongs. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-22net: dsa: move bridging routinesVivien Didelot
Move the DSA port code which bridges a port in port.c, where it belongs. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-22net: dsa: move port state settersVivien Didelot
Add a new port.c file to hold all DSA port-wide logic. This patch moves in the code which sets a port state. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-18net: dsa: include dsa.h only onceVivien Didelot
The public include/net/dsa.h file is meant for DSA drivers, while all DSA core files share a common private header net/dsa/dsa_priv.h file. Ensure that dsa_priv.h is the only DSA core file to include net/dsa.h, and add a new line to separate absolute and relative headers at the same time. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-17net: dsa: Sort DSA tagging protocol driversAndrew Lunn
With more tag protocols being added, regain some order by sorting the entries in various places. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-20net: dsa: add support for the SMSC-LAN9303 tagging formatJuergen Beisert
To define the outgoing port and to discover the incoming port a regular VLAN tag is used by the LAN9303. But its VID meaning is 'special'. This tag handler/filter depends on some hardware features which must be enabled in the device to provide and make use of this special VLAN tag to control the destination and the source of an ethernet packet. Signed-off-by: Juergen Borleis <jbe@pengutronix.de> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-17net: dsa: isolate legacy codeVivien Didelot
This patch moves as is the legacy DSA code from dsa.c to legacy.c, except the few shared symbols which remain in dsa.c. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-08net: dsa: Factor bottom tag receive functionsFlorian Fainelli
All DSA tag receive functions do strictly the same thing after they have located the originating source port from their tag specific protocol: - push ETH_HLEN bytes - set pkt_type to PACKET_HOST - call eth_type_trans() - bump up counters - call netif_receive_skb() Factor all of that into dsa_switch_rcv(). This also makes us return a pointer to a sk_buff, which makes us symetric with the xmit function. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-07net-next: dsa: add Mediatek tag RX/TX handlerSean Wang
Add the support for the 4-bytes tag for DSA port distinguishing inserted allowing receiving and transmitting the packet via the particular port. The tag is being added after the source MAC address in the ethernet header. Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Landen Chao <Landen.Chao@mediatek.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-06net: dsa: add switch notifierVivien Didelot
Add a notifier block per DSA switch, registered against a notifier head in the switch fabric they belong to. This infrastructure will allow to propagate fabric-wide events such as port bridging, VLAN configuration, etc. If a DSA switch driver cares about cross-chip configuration, such events can be caught. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-06net: dsa: move netdevice notifier registrationVivien Didelot
Move the netdevice notifier block register code in slave.c and provide helpers for dsa.c to register and unregister it. At the same time, check for errors since (un)register_netdevice_notifier may fail. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-30net: dsa: Add plumbing for port mirroringFlorian Fainelli
Add necessary plumbing at the slave network device level to have switch drivers implement ndo_setup_tc() and most particularly the cls_matchall classifier. We add support for two switch operations: port_add_mirror and port_del_mirror() which configure, on a per-port basis the mirror parameters requested from the cls_matchall classifier. Code is largely borrowed from the Mellanox Spectrum switch driver. Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-29net: dsa: move bridge device in dsa_portVivien Didelot
Move the bridge_dev pointer from dsa_slave_priv to dsa_port so that DSA drivers can access this information and remove the need to cache it. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-29net: dsa: store a dsa_port in dsa_slave_privVivien Didelot
Store a pointer to the dsa_port structure in the dsa_slave_priv structure, instead of the switch/port index. This will allow to store more information such as the bridge device, needed in DSA drivers for multi-chip configuration. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-26net: dsa: Make most functions take a dsa_port argumentFlorian Fainelli
In preparation for allowing platform data, and therefore no valid device_node pointer, make most DSA functions takes a pointer to a dsa_port structure whenever possible. While at it, introduce a dsa_port_is_valid() helper function which checks whether port->dn is NULL or not at the moment. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-20net: dsa: Remove hwmon supportAndrew Lunn
Only the Marvell mv88e6xxx DSA driver made use of the HWMON support in DSA. The temperature sensor registers are actually in the embedded PHYs, and the PHY driver now supports it. So remove all HWMON support from DSA and drivers. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-07net: dsa: move HWMON support to its own fileVivien Didelot
Isolate the HWMON support in DSA in its own file. Currently only the legacy DSA code is concerned. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-06net: dsa: remove version stringVivien Didelot
The dsa_driver_version string is irrelevant and has not been bumped since its introduction about 9 years ago. Kill it. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-16net-next: dsa: add Qualcomm tag RX/TX handlerJohn Crispin
Add support for the 2-bytes Qualcomm tag that gigabit switches such as the QCA8337/N might insert when receiving packets, or that we need to insert while targeting specific switch ports. The tag is inserted directly behind the ethernet header. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-08net: dsa: Initialize CPU port ethtool ops per treeFlorian Fainelli
Now that we can properly support multiple distinct trees in the system, using a global variable: dsa_cpu_port_ethtool_ops is getting clobbered as soon as the second switch tree gets probed, and we don't want that. We need to move this to be dynamically allocated, and since we can't really be comparing addresses anymore to determine first time initialization versus any other times, just move this to dsa.c and dsa2.c where the remainder of the dst/ds initialization happens. The operations teardown restores the master netdev's ethtool_ops to its original ethtool_ops pointer (typically within the Ethernet driver) Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-08net: dsa: Add initialization helper for CPU port ethtool_opsFlorian Fainelli
Add a helper function: dsa_cpu_port_ethtool_init() which initializes a custom ethtool_ops structure with custom DSA ethtool operations for CPU ports. This is a preliminary change to move the initialization outside of net/dsa/slave.c. Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-04net: dsa: Add new binding implementationAndrew Lunn
The existing DSA binding has a number of limitations and problems. The main problem is that it cannot represent a switch as a linux device, hanging off some bus. It is limited to one CPU port. The DSA platform device is artificial, and does not really represent hardware. Implement a new binding which can be embedded into any type of node on a bus to represent one switch device, and its links to other switches. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-04net: dsa: Refactor selection of tag ops into a functionAndrew Lunn
Replace the two switch statements with an array lookup, and store the result in the dsa tree structure. The drivers no longer need to know the selected tag protocol, so remove it from the dsa switch structure. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-04net: dsa: Split up creating/destroying of DSA and CPU portsAndrew Lunn
Refactor the code to setup a single DSA/CPU port into a function of its own, and export it, so it can be used by the new binding. Similarly, refactor the destroy code into a function. When destroying the ports, don't put the of node. They should be released at the end along with the normal ports. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-19net: dsa: kill circular reference with slave privVivien Didelot
The dsa_slave_priv structure does not need a pointer to its net_device. Kill it. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-07net: dsa: move dsa slave destroy code to slave.cNeil Armstrong
Move dsa slave dedicated code from dsa_switch_destroy to a new dsa_slave_destroy function in slave.c. Add the netif_carrier_off and phy_disconnect calls in order to correctly cleanup the netdev state and PHY state machine. Signed-off-by: Frode Isaksen <fisaksen@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-31net: dsa: Add netconsole supportFlorian Fainelli
Add support for using DSA slave network devices with netconsole, which requires us to allocate and free custom netpoll instances and invoke the parent network device poll controller callback. In order for netconsole to work, we need to construct the DSA tag, but not queue the skb for transmission on the master network device xmit function. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-31net: dsa: Refactor transmit path to eliminate duplicationFlorian Fainelli
All tagging protocols do the same thing: increment device statistics, make room for the tag to be inserted, create the tag, invoke the parent network device transmit function. In order to prepare for adding netpoll support, which requires the tag creation, but not using the parent network device transmit function, do some little refactoring which eliminates duplication between the 4 tagging protocols supported. We need to return a sk_buff pointer back to the caller because the tag specific transmit function may have to reallocate the original skb (e.g: tag_trailer.c) and this is the one we should be transmitting, not the original sk_buff we were passed. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-25net: dsa: integrate with SWITCHDEV for HW bridgingFlorian Fainelli
In order to support bridging offloads in DSA switch drivers, select NET_SWITCHDEV to get access to the port_stp_update and parent_get_id NDOs that we are required to implement. To facilitate the integratation at the DSA driver level, we implement 3 types of operations: - port_join_bridge - port_leave_bridge - port_stp_update DSA will resolve which switch ports that are currently bridge port members as some Switch hardware/drivers need to know about that to limit the register programming to just the relevant registers (especially for slow MDIO buses). We also take care of setting the correct STP state when slave network devices are brought up/down while being bridge members. Finally, when a port is leaving the bridge, we make sure we set in BR_STATE_FORWARDING state, otherwise the bridge layer would leave it disabled as a result of having left the bridge. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-25net: dsa: Ensure that port array elements are initialized before being usedGuenter Roeck
A network device notifier can be called for one or more of the created slave devices before all slave devices have been registered. This can result in a mismatch between ds->phys_port_mask and the registered devices by the time the call is made, and it can result in a slave device being added to a bridge before its entry in ds->ports[] has been initialized. Rework the initialization code to initialize entries in ds->ports[] in dsa_slave_create. With this change, dsa_slave_create no longer needs to return slave_dev but can return an error code instead. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-22net: dsa: allow switch drivers to implement suspend/resume hooksFlorian Fainelli
Add an abstraction layer to suspend/resume switch devices, doing the following split: - suspend/resume the slave network devices and their corresponding PHY devices - suspend/resume the switch hardware using switch driver callbacks Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-15dsa: Split ops up, and avoid assigning tag_protocol and receive separatelyAlexander Duyck
This change addresses several issues. First, it was possible to set tag_protocol without setting the ops pointer. To correct that I have reordered things so that rcv is now populated before we set tag_protocol. Second, it didn't make much sense to keep setting the device ops each time a new slave was registered. So by moving the receive portion out into root switch initialization that issue should be addressed. Third, I wanted to avoid sending tags if the rcv pointer was not registered so I changed the tag check to verify if the rcv function pointer is set on the root tree. If it is then we start sending DSA tagged frames. Finally I split the device ops pointer in the structures into two spots. I placed the rcv function pointer in the root switch since this makes it easiest to access from there, and I placed the xmit function pointer in the slave for the same reason. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-27net: dsa: add Broadcom tag RX/TX handlerFlorian Fainelli
Add support for the 4-bytes Broadcom tag that built-in switches such as the Starfighter 2 might insert when receiving packets, or that we need to insert while targetting specific switch ports. We use a fake local EtherType value for this 4-bytes switch tag: ETH_P_BRCMTAG to make sure we can assign DSA-specific network operations within the DSA drivers. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-27net: dsa: allow for more complex PHY setupsFlorian Fainelli
Modify the DSA slave interface to be bound to an arbitray PHY, not just the ones that are available as child PHY devices of the switch MDIO bus. This allows us for instance to have external PHYs connected to a separate MDIO bus, but yet also connected to a given switch port. Under certain configurations, the physical port mask might not be a 1:1 mapping to the MII PHYs mask. This is the case, if e.g: Port 1 of the switch is used and connects to a PHY at a MDIO address different than 1. Introduce a phys_mii_mask variable which allows driver to implement and divert their own MDIO read/writes operations for a subset of the MDIO PHY addresses. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>