summaryrefslogtreecommitdiff
path: root/net/dcb
AgeCommit message (Collapse)Author
2011-06-09rtnetlink: Compute and store minimum ifinfo dump sizeGreg Rose
The message size allocated for rtnl ifinfo dumps was limited to a single page. This is not enough for additional interface info available with devices that support SR-IOV and caused a bug in which VF info would not be displayed if more than approximately 40 VFs were created per interface. Implement a new function pointer for the rtnl_register service that will calculate the amount of data required for the ifinfo dump and allocate enough data to satisfy the request. Signed-off-by: Greg Rose <gregory.v.rose@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-03-14net: dcbnl: Update copyright datesMark Rustad
Signed-off-by: Mark Rustad <mark.d.rustad@intel.com> Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-03Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/bnx2x/bnx2x.h
2011-03-02dcbnl: add support for retrieving peer configuration - ceeShmulik Ravid
This patch adds the support for retrieving the remote or peer DCBX configuration via dcbnl for embedded DCBX stacks supporting the CEE DCBX standard. Signed-off-by: Shmulik Ravid <shmulikr@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-02dcbnl: add support for retrieving peer configuration - ieeeShmulik Ravid
These 2 patches add the support for retrieving the remote or peer DCBX configuration via dcbnl for embedded DCBX stacks. The peer configuration is part of the DCBX MIB and is useful for debugging and diagnostics of the overall DCB configuration. The first patch add this support for IEEE 802.1Qaz standard the second patch add the same support for the older CEE standard. Diff for v2 - the peer-app-info is CEE specific. Signed-off-by: Shmulik Ravid <shmulikr@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-02net: dcbnl: check correct ops in dcbnl_ieee_set()John Fastabend
The incorrect ops routine was being tested for in DCB_ATTR_IEEE_PFC attributes. This patch corrects it. Currently, every driver implementing ieee_setets also implements ieee_setpfc so this bug is not actualized yet. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-13Don't potentially dereference NULL in net/dcb/dcbnl.c:dcbnl_getapp()Jesper Juhl
nla_nest_start() may return NULL. If it does then we'll blow up in nla_nest_end() when we dereference the pointer. Signed-off-by: Jesper Juhl <jj@chaosbits.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-13net: dcb: application priority is per net_deviceJohn Fastabend
The app_data priority may not be the same for all net devices. In order for stacks with application notifiers to identify the specific net device dcb_app_type should be passed in the ptr. This allows handlers to use dev_get_by_name() to pin priority to net devices. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-24dcbnl: make get_app handling symmetric for IEEE and CEE DCBxJohn Fastabend
The IEEE get/set app handlers use generic routines and do not require the net_device to implement the dcbnl_ops routines. This patch makes it symmetric so user space and drivers do not have to handle the CEE version and IEEE DCBx versions differently. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-06dcb: use after free in dcb_flushapp()Dan Carpenter
The original code has a use after free bug because it's not using the _safe() version of the list_for_each_entry() macro. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-06dcb: unlock on error in dcbnl_ieee_get()Dan Carpenter
There is a "goto nla_put_failure" hidden inside the NLA_PUT() macro, but we're holding the dcb_lock so we need to unlock first. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-03dcbnl: more informed return values for new dcbnl routinesShmulik Ravid
More accurate return values for the following (new) dcbnl routines: dcbnl_getdcbx() dcbnl_setdcbx() dcbnl_getfeatcfg() dcbnl_setfeatcfg() Signed-off-by: Shmulik Ravid <shmulikr@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-31dcbnl: cleanupShmulik Ravid
A couple of small cleanups for patches: [net-next-2.6 PATCH 1/3] dcbnl: add support for ieee8021Qaz attributes [net-next-2.6 PATCH 2/3] dcbnl: add appliction tlv handlers [net-next-2.6 PATCH 3/3] net_dcb: add application notifiers Signed-off-by: Shmulik Ravid <shmulikr@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-31dcbnl: adding DCBX feature flags get-setShmulik Ravid
Adding a pair of set-get routines to dcbnl for setting the negotiation flags of the various DCB features. Conforms to the CEE flavor of DCBX The user sets these flags (enable, advertise, willing) for each feature to be used by the DCBX engine. The 'get' routine returns which of the features is enabled after the negotiation. This patch is dependent on the following patches: [net-next-2.6 PATCH 1/3] dcbnl: add support for ieee8021Qaz attributes [net-next-2.6 PATCH 2/3] dcbnl: add appliction tlv handlers [net-next-2.6 PATCH 3/3] net_dcb: add application notifiers Signed-off-by: Shmulik Ravid <shmulikr@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-31dcbnl: adding DCBX engine capabilityShmulik Ravid
Adding an optional DCBX capability and a pair for get-set routines for setting the device DCBX mode. The DCBX capability is a bit field of supported attributes. The user is expected to set the DCBX mode with a subset of the advertised attributes. This patch is dependent on the following patches: [net-next-2.6 PATCH 1/3] dcbnl: add support for ieee8021Qaz attributes [net-next-2.6 PATCH 2/3] dcbnl: add appliction tlv handlers [net-next-2.6 PATCH 3/3] net_dcb: add application notifiers Signed-off-by: Shmulik Ravid <shmulikr@broadcom.com> Acked-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-31net_dcb: add application notifiersJohn Fastabend
DCBx applications priorities can be changed dynamically. If application stacks are expected to keep the skb priority consistent with the dcbx priority the stack will need to be notified when these changes occur. This patch adds application notifiers for the stack to register with. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-31dcbnl: add appliction tlv handlersJohn Fastabend
This patch adds application tlv handlers. Networking stacks may use the application priority to set the skb priority of their stack using the negoatiated dcbx priority. This patch provides the dcb_{get|set}app() routines for the stack to query these parameters. Notice lower layer drivers can use the dcbnl_ops routines if additional handling is needed. Perhaps in the firmware case for example Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: Shmulik Ravid <shmulikr@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-31dcbnl: add support for ieee8021Qaz attributesJohn Fastabend
The IEEE8021Qaz is the IEEE standard version of CEE. The standard has had enough significant changes from the CEE version that many of the CEE attributes have no meaning in the new spec or do not easily map to IEEE standards. Rather then attempt to create a complicated mapping between CEE and IEEE standards this patch adds a nested IEEE attribute to the list of DCB attributes. The policy is, [DCB_ATTR_IFNAME] [DCB_ATTR_STATE] ... [DCB_ATTR_IEEE] [DCB_ATTR_IEEE_ETS] [DCB_ATTR_IEEE_PFC] [DCB_ATTR_IEEE_APP_TABLE] [DCB_ATTR_IEEE_APP] ... The following dcbnl_rtnl_ops routines were added to handle the IEEE standard, int (*ieee_getets) (struct net_device *, struct ieee_ets *); int (*ieee_setets) (struct net_device *, struct ieee_ets *); int (*ieee_getpfc) (struct net_device *, struct ieee_pfc *); int (*ieee_setpfc) (struct net_device *, struct ieee_pfc *); int (*ieee_getapp) (struct net_device *, struct dcb_app *); int (*ieee_setapp) (struct net_device *, struct dcb_app *); Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-30include cleanup: Update gfp.h and slab.h includes to prepare for breaking ↵Tejun Heo
implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-02-18const: struct nla_policyAlexey Dobriyan
Make remaining netlink policies as const. Fixup coding style where needed. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-29net: Move && and || to end of previous lineJoe Perches
Not including net/atm/ Compiled tested x86 allyesconfig only Added a > 80 column line or two, which I ignored. Existing checkpatch plaints willfully, cheerfully ignored. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-25net: use net_eq to compare netsOctavian Purdila
Generated with the following semantic patch @@ struct net *n1; struct net *n2; @@ - n1 == n2 + net_eq(n1, n2) @@ struct net *n1; struct net *n2; @@ - n1 != n2 + !net_eq(n1, n2) applied over {include,net,drivers/net}. Signed-off-by: Octavian Purdila <opurdila@ixiacom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-26net: fix double skb free in dcbnlJohn Fastabend
netlink_unicast() calls kfree_skb even in the error case. dcbnl calls netlink_unicast() which when it fails free's the skb and returns an error value. dcbnl is free'ing the skb again when this error occurs. This patch removes the double free. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-01dcbnl: Add implementations of dcbnl setapp/getapp commandsYi Zou
Implements the dcbnl netlink setapp/getapp pair. When a setapp/getapp is received, dcbnl would just pass on to dcbnl_rtnl_op.setapp/getapp that are supposed to be implemented by the low level drivers. Signed-off-by: Yi Zou <yi.zou@intel.com> Acked-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-01dcbnl: Add netlink attributes for setapp/getapp to dcbnlYi Zou
Add defines for dcbnl netlink attributes to support netlink message passing of setapp/getapp in dcbnl. Signed-off-by: Yi Zou <yi.zou@intel.com> Acked-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-04DCB: fix kfree(skb)Roel Kluin
Use kfree_skb instead of kfree for struct sk_buff pointers. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-21net: add DCNA attribute to the BCN interface for DCBDon Skidmore
Adds the Backward Congestion Notification Address (BCNA) attribute to the Backward Congestion Notification (BCN) interface for Data Center Bridging (DCB), which was missing. Receive the BCNA attribute in the ixgbe driver. The BCNA attribute is for a switch to inform the endstation about the physical port identification in order to support BCN on aggregated links. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Signed-off-by: Eric W Multanen <eric.w.multanen@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2008-12-21net: fix DCB setstate to return success/failureDon Skidmore
Data Center Bridging (DCB) had no way to know if setstate had failed in the driver. This patch enables dcb netlink code to handle the status for the DCB setstate interface. Likewise it allows the driver to return a failed status if MSI-X isn't enabled. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Signed-off-by: Eric W Multanen <eric.w.multanen@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-15net: fix dcbnl_setnumtcs operation checkDon Skidmore
dcbml_setnumtcs wasn't checking for the presence of the setnumtcs function. Instead, it was checking for setstate which was a bug. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Signed-off-by: Eric W Multanen <eric.w.multanen@intel.com> Signed-off-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-25DCB: fix kconfig optionJeff Kirsher
Since the netlink option for DCB is necessary to actually be useful, simplified the Kconfig option. In addition, added useful help text for the Kconfig option. Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-20DCB: Add support for DCB BCNAlexander Duyck
Adds an interface to configure the Backward Congestion Notification (BCN) feature. In a BCN capabale network, congestion notifications from congested points out in the network can cause the end station limit the rate of a given traffic flow. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-20DCB: Add interface to query the state of PFC feature.Alexander Duyck
Adds a netlink interface for Data Center Bridging (DCB) to get and set the enable state of the Priority Flow Control (PFC) feature. Primarily, this is a way to turn off PFC in the driver while DCB remains enabled. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-20DCB: Add interface to query # of TCs supported by deviceAlexander Duyck
Adds interface for Data Center Bridging (DCB) to query (and set if supported) the number of traffic classes currently supported by the device for the two (DCB) features: priority groups (PG) and priority flow control (PFC). Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-20DCB: Add interface to query for the DCB capabilities of an device.Alexander Duyck
Adds to the netlink interface for Data Center Bridging (DCB), allowing the DCB capabilities supported by a device to be queried. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-20ixgbe: this patch adds support for DCB to the kernel and ixgbe driverAlexander Duyck
This adds support for Data Center Bridging (DCB) features in the ixgbe driver and adds an rtnetlink interface for configuring DCB to the kernel. The DCB feature support included are Priority Grouping (PG) - which allows bandwidth guarantees to be allocated to groups to traffic based on the 802.1q priority, and Priority Based Flow Control (PFC) - which introduces a new MAC control PAUSE frame which works at granularity of the 802.1p priority instead of the link (IEEE 802.3x). Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-01 06:29:18 +0000