summaryrefslogtreecommitdiff
path: root/net/core/pktgen.c
AgeCommit message (Collapse)Author
2016-01-11Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts: drivers/net/bonding/bond_main.c drivers/net/ethernet/mellanox/mlxsw/spectrum.h drivers/net/ethernet/mellanox/mlxsw/spectrum_switchdev.c The bond_main.c and mellanox switch conflicts were cases of overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-11net: pktgen: fix null ptr deref in skb allocationJohn Fastabend
Fix possible null pointer dereference that may occur when calling skb_reserve() on a null skb. Fixes: 879c7220e82 ("net: pktgen: Observe needed_headroom of the device") Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-15net: Eliminate NETIF_F_GEN_CSUM and NETIF_F_V[46]_CSUMTom Herbert
These netif flags are unnecessary convolutions. It is more straightforward to just use NETIF_F_HW_CSUM, NETIF_F_IP_CSUM, and NETIF_F_IPV6_CSUM directly. This patch also: - Cleans up can_checksum_protocol - Simplifies netdev_intersect_features Signed-off-by: Tom Herbert <tom@herbertland.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-13Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts: drivers/net/ethernet/cavium/Kconfig The cavium conflict was overlapping dependency changes. Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-06net: pktgen: don't abuse current->state in pktgen_thread_worker()Oleg Nesterov
Commit 1fbe4b46caca "net: pktgen: kill the Wait for kthread_stop code in pktgen_thread_worker()" removed (in particular) the final __set_current_state(TASK_RUNNING) and I didn't notice the previous set_current_state(TASK_INTERRUPTIBLE). This triggers the warning in __might_sleep() after return. Afaics, we can simply remove both set_current_state()'s, and we could do this a long ago right after ef87979c273a2 "pktgen: better scheduler friendliness" which changed pktgen_thread_worker() to use wait_event_interruptible_timeout(). Reported-by: Huang Ying <ying.huang@intel.com> Signed-off-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-29net: pktgen: Remove unused 'allocated_skbs' fieldBogdan Hamciuc
Field pktgen_dev.allocated_skbs had been written to, but never read from. The number of allocated skbs can be deduced anyway, from the total number of sent packets and the 'clone_skb' param. Signed-off-by: Bogdan Hamciuc <bogdan.hamciuc@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-29net: pktgen: Observe needed_headroom of the deviceBogdan Hamciuc
Allocate enough space so as not to force the outgoing net device to do skb_realloc_headroom(). Signed-off-by: Bogdan Hamciuc <bogdan.hamciuc@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-09net: pktgen: kill the "Wait for kthread_stop" code in pktgen_thread_worker()Oleg Nesterov
pktgen_thread_worker() doesn't need to wait for kthread_stop(), it can simply exit. Just pktgen_create_thread() and pg_net_exit() should do get_task_struct()/put_task_struct(). kthread_stop(dead_thread) is fine. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-09net: pktgen: fix race between pktgen_thread_worker() and kthread_stop()Oleg Nesterov
pktgen_thread_worker() is obviously racy, kthread_stop() can come between the kthread_should_stop() check and set_current_state(). Signed-off-by: Oleg Nesterov <oleg@redhat.com> Reported-by: Jan Stancek <jstancek@redhat.com> Reported-by: Marcelo Leitner <mleitner@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-24Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds
Pull networking updates from David Miller: 1) Add TX fast path in mac80211, from Johannes Berg. 2) Add TSO/GRO support to ibmveth, from Thomas Falcon 3) Move away from cached routes in ipv6, just like ipv4, from Martin KaFai Lau. 4) Lots of new rhashtable tests, from Thomas Graf. 5) Run ingress qdisc lockless, from Alexei Starovoitov. 6) Allow servers to fetch TCP packet headers for SYN packets of new connections, for fingerprinting. From Eric Dumazet. 7) Add mode parameter to pktgen, for testing receive. From Alexei Starovoitov. 8) Cache access optimizations via simplifications of build_skb(), from Alexander Duyck. 9) Move page frag allocator under mm/, also from Alexander. 10) Add xmit_more support to hv_netvsc, from KY Srinivasan. 11) Add a counter guard in case we try to perform endless reclassify loops in the packet scheduler. 12) Extern flow dissector to be programmable and use it in new "Flower" classifier. From Jiri Pirko. 13) AF_PACKET fanout rollover fixes, performance improvements, and new statistics. From Willem de Bruijn. 14) Add netdev driver for GENEVE tunnels, from John W Linville. 15) Add ingress netfilter hooks and filtering, from Pablo Neira Ayuso. 16) Fix handling of epoll edge triggers in TCP, from Eric Dumazet. 17) Add an ECN retry fallback for the initial TCP handshake, from Daniel Borkmann. 18) Add tail call support to BPF, from Alexei Starovoitov. 19) Add several pktgen helper scripts, from Jesper Dangaard Brouer. 20) Add zerocopy support to AF_UNIX, from Hannes Frederic Sowa. 21) Favor even port numbers for allocation to connect() requests, and odd port numbers for bind(0), in an effort to help avoid ip_local_port_range exhaustion. From Eric Dumazet. 22) Add Cavium ThunderX driver, from Sunil Goutham. 23) Allow bpf programs to access skb_iif and dev->ifindex SKB metadata, from Alexei Starovoitov. 24) Add support for T6 chips in cxgb4vf driver, from Hariprasad Shenai. 25) Double TCP Small Queues default to 256K to accomodate situations like the XEN driver and wireless aggregation. From Wei Liu. 26) Add more entropy inputs to flow dissector, from Tom Herbert. 27) Add CDG congestion control algorithm to TCP, from Kenneth Klette Jonassen. 28) Convert ipset over to RCU locking, from Jozsef Kadlecsik. 29) Track and act upon link status of ipv4 route nexthops, from Andy Gospodarek. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1670 commits) bridge: vlan: flush the dynamically learned entries on port vlan delete bridge: multicast: add a comment to br_port_state_selection about blocking state net: inet_diag: export IPV6_V6ONLY sockopt stmmac: troubleshoot unexpected bits in des0 & des1 net: ipv4 sysctl option to ignore routes when nexthop link is down net: track link-status of ipv4 nexthops net: switchdev: ignore unsupported bridge flags net: Cavium: Fix MAC address setting in shutdown state drivers: net: xgene: fix for ACPI support without ACPI ip: report the original address of ICMP messages net/mlx5e: Prefetch skb data on RX net/mlx5e: Pop cq outside mlx5e_get_cqe net/mlx5e: Remove mlx5e_cq.sqrq back-pointer net/mlx5e: Remove extra spaces net/mlx5e: Avoid TX CQE generation if more xmit packets expected net/mlx5e: Avoid redundant dev_kfree_skb() upon NOP completion net/mlx5e: Remove re-assignment of wq type in mlx5e_enable_rq() net/mlx5e: Use skb_shinfo(skb)->gso_segs rather than counting them net/mlx5e: Static mapping of netdev priv resources to/from netdev TX queues net/mlx4_en: Use HW counters for rx/tx bytes/packets in PF device ...
2015-05-25pktgen: remove one sparse errorEric Dumazet
net/core/pktgen.c:2672:43: warning: incorrect type in assignment (different base types) net/core/pktgen.c:2672:43: expected unsigned short [unsigned] [short] [usertype] <noident> net/core/pktgen.c:2672:43: got restricted __be16 [usertype] protocol Let's use proper struct ethhdr instead of hard coding everything. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-22pktgen: make /proc/net/pktgen/pgctrl report fail on invalid inputJesper Dangaard Brouer
Giving /proc/net/pktgen/pgctrl an invalid command just returns shell success and prints a warning in dmesg. This is not very useful for shell scripting, as it can only detect the error by parsing dmesg. Instead return -EINVAL when the command is unknown, as this provides userspace shell scripting a way of detecting this. Also bump version tag to 2.75, because (1) reading /proc/net/pktgen/pgctrl output this version number which would allow to detect this small semantic change, and (2) because the pktgen version tag have not been updated since 2010. Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-22pktgen: adjust spacing in proc file interface outputJesper Dangaard Brouer
Too many spaces were introduced in commit 63adc6fb8ac0 ("pktgen: cleanup checkpatch warnings"), thus misaligning "src_min:" to other columns. Fixes: 63adc6fb8ac0 ("pktgen: cleanup checkpatch warnings") Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-12pktgen: fix packet generationAlexei Starovoitov
pkt_gen->last_ok was not set properly, so after the first burst pktgen instead of allocating new packet, will reuse old one, advance eth_type_trans further, which would mean the stack will be seeing very short bogus packets. Fixes: 62f64aed622b ("pktgen: introduce xmit_mode '<start_xmit|netif_receive>'") Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Acked-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-09pktgen: introduce xmit_mode '<start_xmit|netif_receive>'Alexei Starovoitov
Introduce xmit_mode 'netif_receive' for pktgen which generates the packets using familiar pktgen commands, but feeds them into netif_receive_skb() instead of ndo_start_xmit(). Default mode is called 'start_xmit'. It is designed to test netif_receive_skb and ingress qdisc performace only. Make sure to understand how it works before using it for other rx benchmarking. Sample script 'pktgen.sh': \#!/bin/bash function pgset() { local result echo $1 > $PGDEV result=`cat $PGDEV | fgrep "Result: OK:"` if [ "$result" = "" ]; then cat $PGDEV | fgrep Result: fi } [ -z "$1" ] && echo "Usage: $0 DEV" && exit 1 ETH=$1 PGDEV=/proc/net/pktgen/kpktgend_0 pgset "rem_device_all" pgset "add_device $ETH" PGDEV=/proc/net/pktgen/$ETH pgset "xmit_mode netif_receive" pgset "pkt_size 60" pgset "dst 198.18.0.1" pgset "dst_mac 90:e2:ba:ff:ff:ff" pgset "count 10000000" pgset "burst 32" PGDEV=/proc/net/pktgen/pgctrl echo "Running... ctrl^C to stop" pgset "start" echo "Done" cat /proc/net/pktgen/$ETH Usage: $ sudo ./pktgen.sh eth2 ... Result: OK: 232376(c232372+d3) usec, 10000000 (60byte,0frags) 43033682pps 20656Mb/sec (20656167360bps) errors: 10000000 Raw netif_receive_skb speed should be ~43 million packet per second on 3.7Ghz x86 and 'perf report' should look like: 37.69% kpktgend_0 [kernel.vmlinux] [k] __netif_receive_skb_core 25.81% kpktgend_0 [kernel.vmlinux] [k] kfree_skb 7.22% kpktgend_0 [kernel.vmlinux] [k] ip_rcv 5.68% kpktgend_0 [pktgen] [k] pktgen_thread_worker If fib_table_lookup is seen on top, it means skb was processed by the stack. To benchmark netif_receive_skb only make sure that 'dst_mac' of your pktgen script is different from receiving device mac and it will be dropped by ip_rcv Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-09pktgen: adjust flag NO_TIMESTAMP to be more pktgen compliantJesper Dangaard Brouer
Allow flag NO_TIMESTAMP to turn timestamping on again, like other flags, with a negation of the flag like !NO_TIMESTAMP. Also document the option flag NO_TIMESTAMP. Fixes: afb84b626184 ("pktgen: add flag NO_TIMESTAMP to disable timestamping") Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-22net: core: pktgen: Remove bogus hrtimer_active() checkThomas Gleixner
The check for hrtimer_active() after starting the timer is pointless. If the timer is inactive it has expired already and therefor the task pointer is already NULL. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Peter Zijlstra <peterz@infradead.org> Cc: Preeti U Murthy <preeti@linux.vnet.ibm.com> Cc: Viresh Kumar <viresh.kumar@linaro.org> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Acked-by: David S. Miller <davem@davemloft.net> Link: http://lkml.kernel.org/r/20150414203503.165258315@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-02-22net: pktgen: disable xmit_clone on virtual devicesEric Dumazet
Trying to use burst capability (aka xmit_more) on a virtual device like bonding is not supported. For example, skb might be queued multiple times on a qdisc, with various list corruptions. Fixes: 38b2cf2982dc ("net: pktgen: packet bursting via skb->xmit_more") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Alexei Starovoitov <ast@plumgrid.com> Acked-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-14net: spelling fixesStephen Hemminger
Spelling errors caught by codespell. Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-05pktgen: fix UDP checksum computationSabrina Dubroca
This patch fixes two issues in UDP checksum computation in pktgen. First, the pseudo-header uses the source and destination IP addresses. Currently, the ports are used for IPv4. Second, the UDP checksum covers both header and data. So we need to generate the data earlier (move pktgen_finalize_skb up), and compute the checksum for UDP header + data. Fixes: c26bf4a51308c ("pktgen: Add UDPCSUM flag to support UDP checksums") Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-19net: pktgen: Deletion of an unnecessary check before the function call ↵Markus Elfring
"proc_remove" The proc_remove() function tests whether its argument is NULL and then returns immediately. Thus the test around the call is not needed. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-01net: pktgen: packet bursting via skb->xmit_moreAlexei Starovoitov
This patch demonstrates the effect of delaying update of HW tailptr. (based on earlier patch by Jesper) burst=1 is the default. It sends one packet with xmit_more=false burst=2 sends one packet with xmit_more=true and 2nd copy of the same packet with xmit_more=false burst=3 sends two copies of the same packet with xmit_more=true and 3rd copy with xmit_more=false Performance with ixgbe (usec 30): burst=1 tx:9.2 Mpps burst=2 tx:13.5 Mpps burst=3 tx:14.5 Mpps full 10G line rate Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-10pktgen: Convert pr_warning to pr_warnJoe Perches
Use the more common pr_warn. Realign arguments. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-01pktgen: add flag NO_TIMESTAMP to disable timestampingJesper Dangaard Brouer
Then testing the TX limits of the stack, then it is useful to be-able to disable the do_gettimeofday() timetamping on every packet. This implements a pktgen flag NO_TIMESTAMP which will disable this call to do_gettimeofday(). The performance change on (my system E5-2695) with skb_clone=0, goes from TX 2,423,751 pps to 2,567,165 pps with flag NO_TIMESTAMP. Thus, the cost of do_gettimeofday() or saving is approx 23 nanosec. Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-01net: Pass a "more" indication down into netdev_start_xmit() code paths.David S. Miller
For now it will always be false. Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-01net: Do txq_trans_update() in netdev_start_xmit()David S. Miller
That way we don't have to audit every call site to make sure it is doing this properly. Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-29net: add skb_get_tx_queue() helperDaniel Borkmann
Replace occurences of skb_get_queue_mapping() and follow-up netdev_get_tx_queue() with an actual helper function. Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-24net: Add ops->ndo_xmit_flush()David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-15pktgen: remove unnecessary break after gotoFabian Frederick
Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-01pktgen: RCU-ify "if_list" to remove lock in next_to_run()Jesper Dangaard Brouer
The if_lock()/if_unlock() in next_to_run() adds a significant overhead, because its called for every packet in busy loop of pktgen_thread_worker(). (Thomas Graf originally pointed me at this lock problem). Removing these two "LOCK" operations should in theory save us approx 16ns (8ns x 2), as illustrated below we do save 16ns when removing the locks and introducing RCU protection. Performance data with CLONE_SKB==100000, TX-size=512, rx-usecs=30: (single CPU performance, ixgbe 10Gbit/s, E5-2630) * Prev : 5684009 pps --> 175.93ns (1/5684009*10^9) * RCU-fix: 6272204 pps --> 159.43ns (1/6272204*10^9) * Diff : +588195 pps --> -16.50ns To understand this RCU patch, I describe the pktgen thread model below. In pktgen there is several kernel threads, but there is only one CPU running each kernel thread. Communication with the kernel threads are done through some thread control flags. This allow the thread to change data structures at a know synchronization point, see main thread func pktgen_thread_worker(). Userspace changes are communicated through proc-file writes. There are three types of changes, general control changes "pgctrl" (func:pgctrl_write), thread changes "kpktgend_X" (func:pktgen_thread_write), and interface config changes "etcX@N" (func:pktgen_if_write). Userspace "pgctrl" and "thread" changes are synchronized via the mutex pktgen_thread_lock, thus only a single userspace instance can run. The mutex is taken while the packet generator is running, by pgctrl "start". Thus e.g. "add_device" cannot be invoked when pktgen is running/started. All "pgctrl" and all "thread" changes, except thread "add_device", communicate via the thread control flags. The main problem is the exception "add_device", that modifies threads "if_list" directly. Fortunately "add_device" cannot be invoked while pktgen is running. But there exists a race between "rem_device_all" and "add_device" (which normally don't occur, because "rem_device_all" waits 125ms before returning). Background'ing "rem_device_all" and running "add_device" immediately allow the race to occur. The race affects the threads (list of devices) "if_list". The if_lock is used for protecting this "if_list". Other readers are given lock-free access to the list under RCU read sections. Note, interface config changes (via proc) can occur while pktgen is running, which worries me a bit. I'm assuming proc_remove() takes appropriate locks, to assure no writers exists after proc_remove() finish. I've been running a script exercising the race condition (leading me to fix the proc_remove order), without any issues. The script also exercises concurrent proc writes, while the interface config is getting removed. Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Reviewed-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-01pktgen: avoid expensive set_current_state() call in loopJesper Dangaard Brouer
Avoid calling set_current_state() inside the busy-loop in pktgen_thread_worker(). In case of pkt_dev->delay, then it is still used/enabled in pktgen_xmit() via the spin() call. The set_current_state(TASK_INTERRUPTIBLE) uses a xchg, which implicit is LOCK prefixed. I've measured the asm LOCK operation to take approx 8ns on this E5-2630 CPU. Performance increase corrolate with this measurement. Performance data with CLONE_SKB==100000, rx-usecs=30: (single CPU performance, ixgbe 10Gbit/s, E5-2630) * Prev: 5454050 pps --> 183.35ns (1/5454050*10^9) * Now: 5684009 pps --> 175.93ns (1/5684009*10^9) * Diff: +229959 pps --> -7.42ns Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-16pktgen: Use seq_puts() where seq_printf() is not neededThomas Graf
Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-12pktgen: be friendly to LLTX devicesDaniel Borkmann
Similarly to commit 43279500deca ("packet: respect devices with LLTX flag in direct xmit"), we can basically apply the very same to pktgen. This will help testing against LLTX devices such as dummy driver (or others), which only have a single netdevice txq and would otherwise require locking their txq from pktgen side while e.g. in dummy case, we would not need any locking. Fix this by making use of HARD_TX_{UN,}LOCK API, so that NETIF_F_LLTX will be respected. Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Cc: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-07pktgen: fix xmit test for BQL enabled devicesDaniel Borkmann
Similarly as in commit 8e2f1a63f221 ("packet: fix packet_direct_xmit for BQL enabled drivers"), we test for __QUEUE_STATE_STACK_XOFF bit in pktgen's xmit, which would not fully fill the device's TX ring for BQL drivers that use netdev_tx_sent_queue(). Fix is to use, similarly as we do in packet sockets, netif_xmit_frozen_or_drv_stopped() test. Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Cc: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-24pktgen: document all supported flagsMathias Krause
The documentation misses a few of the supported flags. Fix this. Also respect the dependency to CONFIG_XFRM for the IPSEC flag. Cc: Fan Du <fan.du@windriver.com> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: Mathias Krause <minipli@googlemail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-24pktgen: simplify error handling in pgctrl_write()Mathias Krause
The 'out' label is just a relict from previous times as pgctrl_write() had multiple error paths. Get rid of it and simply return right away on errors. Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: Mathias Krause <minipli@googlemail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-24pktgen: fix out-of-bounds access in pgctrl_write()Mathias Krause
If a privileged user writes an empty string to /proc/net/pktgen/pgctrl the code for stripping the (then non-existent) '\n' actually writes the zero byte at index -1 of data[]. The then still uninitialized array will very likely fail the command matching tests and the pr_warning() at the end will therefore leak stack bytes to the kernel log. Fix those issues by simply ensuring we're passed a non-empty string as the user API apparently expects a trailing '\n' for all commands. Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: Mathias Krause <minipli@googlemail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-21pktgen: Use ether_addr_copyJoe Perches
Use ether_addr_copy instead of memcpy(a, b, ETH_ALEN) to save some cycles on arm and powerpc. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-10{xfrm,pktgen} Fix compiling error when CONFIG_XFRM is not setFan Du
0-DAY kernel build testing backend reported below error: All error/warnings: net/core/pktgen.c: In function 'pktgen_if_write': >> >> net/core/pktgen.c:1487:10: error: 'struct pktgen_dev' has no member named 'spi' >> >> net/core/pktgen.c:1488:43: error: 'struct pktgen_dev' has no member named 'spi' Fix this by encapuslating the code with CONFIG_XFRM. Cc: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Fan Du <fan.du@windriver.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2014-01-06pktgen_dst_metrics[] can be staticFengguang Wu
CC: Fan Du <fan.du@windriver.com> CC: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2014-01-03{pktgen, xfrm} Show spi value properly when ipsec turned onFan Du
If user run pktgen plus ipsec by using spi, show spi value properly when cat /proc/net/pktgen/ethX Signed-off-by: Fan Du <fan.du@windriver.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2014-01-03{pktgen, xfrm} Introduce xfrm_state_lookup_byspi for pktgenFan Du
Introduce xfrm_state_lookup_byspi to find user specified by custom from "pgset spi xxx". Using this scheme, any flow regardless its saddr/daddr could be transform by SA specified with configurable spi. Signed-off-by: Fan Du <fan.du@windriver.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2014-01-03{pktgen, xfrm} Construct skb dst for tunnel mode transformationFan Du
IPsec tunnel mode encapuslation needs to set outter ip header with right protocol/ttl/id value with regard to skb->dst->child. Looking up a rt in a standard way is absolutely wrong for every packet transmission. In a simple way, construct a dst by setting neccessary information to make tunnel mode encapuslation working. Signed-off-by: Fan Du <fan.du@windriver.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2014-01-03{pktgen, xfrm} Using "pgset spi xxx" to spedifiy SA for a given flowFan Du
User could set specific SPI value to arm pktgen flow with IPsec transformation, instead of looking up SA by sadr/daddr. The reaseon to do so is because current state lookup scheme is both slow and, most important of all, in fact pktgen doesn't need to match any SA state addresses information, all it needs is the SA transfromation shell to do the encapuslation. And this option also provide user an alternative to using pktgen test existing SA without creating new ones. Signed-off-by: Fan Du <fan.du@windriver.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2014-01-03{pktgen, xfrm} Add statistics counting when transformingFan Du
so /proc/net/xfrm_stat could give user clue about what's wrong in this process. Signed-off-by: Fan Du <fan.du@windriver.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2014-01-03{pktgen, xfrm} Correct xfrm state lock usage when transformingFan Du
xfrm_state lock protects its state, i.e., VALID/DEAD and statistics, not the transforming procedure, as both mode/type output functions are reentrant. Another issue is state lock can be used in BH context when state timer alarmed, after transformation in pktgen, update state statistics acquiring state lock should disabled BH context for a moment. Otherwise LOCKDEP critisize this: [ 62.354339] pktgen: Packet Generator for packet performance testing. Version: 2.74 [ 62.655444] [ 62.655448] ================================= [ 62.655451] [ INFO: inconsistent lock state ] [ 62.655455] 3.13.0-rc2+ #70 Not tainted [ 62.655457] --------------------------------- [ 62.655459] inconsistent {IN-SOFTIRQ-W} -> {SOFTIRQ-ON-W} usage. [ 62.655463] kpktgend_0/2764 [HC0[0]:SC0[0]:HE1:SE1] takes: [ 62.655466] (&(&x->lock)->rlock){+.?...}, at: [<ffffffffa00886f6>] pktgen_thread_worker+0x1796/0x1860 [pktgen] [ 62.655479] {IN-SOFTIRQ-W} state was registered at: [ 62.655484] [<ffffffff8109a61d>] __lock_acquire+0x62d/0x1d70 [ 62.655492] [<ffffffff8109c3c7>] lock_acquire+0x97/0x130 [ 62.655498] [<ffffffff81774af6>] _raw_spin_lock+0x36/0x70 [ 62.655505] [<ffffffff816dc3a3>] xfrm_timer_handler+0x43/0x290 [ 62.655511] [<ffffffff81059437>] __tasklet_hrtimer_trampoline+0x17/0x40 [ 62.655519] [<ffffffff8105a1b7>] tasklet_hi_action+0xd7/0xf0 [ 62.655523] [<ffffffff81059ac6>] __do_softirq+0xe6/0x2d0 [ 62.655526] [<ffffffff8105a026>] irq_exit+0x96/0xc0 [ 62.655530] [<ffffffff8177fd0a>] smp_apic_timer_interrupt+0x4a/0x60 [ 62.655537] [<ffffffff8177e96f>] apic_timer_interrupt+0x6f/0x80 [ 62.655541] [<ffffffff8100b7c6>] arch_cpu_idle+0x26/0x30 [ 62.655547] [<ffffffff810ace28>] cpu_startup_entry+0x88/0x2b0 [ 62.655552] [<ffffffff81761c3c>] rest_init+0xbc/0xd0 [ 62.655557] [<ffffffff81ea5e5e>] start_kernel+0x3c4/0x3d1 [ 62.655583] [<ffffffff81ea55a8>] x86_64_start_reservations+0x2a/0x2c [ 62.655588] [<ffffffff81ea569f>] x86_64_start_kernel+0xf5/0xfc [ 62.655592] irq event stamp: 77 [ 62.655594] hardirqs last enabled at (77): [<ffffffff810ab7f2>] vprintk_emit+0x1b2/0x520 [ 62.655597] hardirqs last disabled at (76): [<ffffffff810ab684>] vprintk_emit+0x44/0x520 [ 62.655601] softirqs last enabled at (22): [<ffffffff81059b57>] __do_softirq+0x177/0x2d0 [ 62.655605] softirqs last disabled at (15): [<ffffffff8105a026>] irq_exit+0x96/0xc0 [ 62.655609] [ 62.655609] other info that might help us debug this: [ 62.655613] Possible unsafe locking scenario: [ 62.655613] [ 62.655616] CPU0 [ 62.655617] ---- [ 62.655618] lock(&(&x->lock)->rlock); [ 62.655622] <Interrupt> [ 62.655623] lock(&(&x->lock)->rlock); [ 62.655626] [ 62.655626] *** DEADLOCK *** [ 62.655626] [ 62.655629] no locks held by kpktgend_0/2764. [ 62.655631] [ 62.655631] stack backtrace: [ 62.655636] CPU: 0 PID: 2764 Comm: kpktgend_0 Not tainted 3.13.0-rc2+ #70 [ 62.655638] Hardware name: innotek GmbH VirtualBox, BIOS VirtualBox 12/01/2006 [ 62.655642] ffffffff8216b7b0 ffff88001be43ab8 ffffffff8176af37 0000000000000007 [ 62.655652] ffff88001c8d4fc0 ffff88001be43b18 ffffffff81766d78 0000000000000000 [ 62.655663] ffff880000000001 ffff880000000001 ffffffff8101025f ffff88001be43b18 [ 62.655671] Call Trace: [ 62.655680] [<ffffffff8176af37>] dump_stack+0x46/0x58 [ 62.655685] [<ffffffff81766d78>] print_usage_bug+0x1f1/0x202 [ 62.655691] [<ffffffff8101025f>] ? save_stack_trace+0x2f/0x50 [ 62.655696] [<ffffffff81099f8c>] mark_lock+0x28c/0x2f0 [ 62.655700] [<ffffffff810994b0>] ? check_usage_forwards+0x150/0x150 [ 62.655704] [<ffffffff8109a67a>] __lock_acquire+0x68a/0x1d70 [ 62.655712] [<ffffffff81115b09>] ? irq_work_queue+0x69/0xb0 [ 62.655717] [<ffffffff810ab7f2>] ? vprintk_emit+0x1b2/0x520 [ 62.655722] [<ffffffff8109cec5>] ? trace_hardirqs_on_caller+0x105/0x1d0 [ 62.655730] [<ffffffffa00886f6>] ? pktgen_thread_worker+0x1796/0x1860 [pktgen] [ 62.655734] [<ffffffff8109c3c7>] lock_acquire+0x97/0x130 [ 62.655741] [<ffffffffa00886f6>] ? pktgen_thread_worker+0x1796/0x1860 [pktgen] [ 62.655745] [<ffffffff81774af6>] _raw_spin_lock+0x36/0x70 [ 62.655752] [<ffffffffa00886f6>] ? pktgen_thread_worker+0x1796/0x1860 [pktgen] [ 62.655758] [<ffffffffa00886f6>] pktgen_thread_worker+0x1796/0x1860 [pktgen] [ 62.655766] [<ffffffffa0087a79>] ? pktgen_thread_worker+0xb19/0x1860 [pktgen] [ 62.655771] [<ffffffff8109cf9d>] ? trace_hardirqs_on+0xd/0x10 [ 62.655777] [<ffffffff81775410>] ? _raw_spin_unlock_irq+0x30/0x40 [ 62.655785] [<ffffffff8151faa0>] ? e1000_clean+0x9d0/0x9d0 [ 62.655791] [<ffffffff81094310>] ? __init_waitqueue_head+0x60/0x60 [ 62.655795] [<ffffffff81094310>] ? __init_waitqueue_head+0x60/0x60 [ 62.655800] [<ffffffffa0086f60>] ? mod_cur_headers+0x7f0/0x7f0 [pktgen] [ 62.655806] [<ffffffff81078f84>] kthread+0xe4/0x100 [ 62.655813] [<ffffffff81078ea0>] ? flush_kthread_worker+0x170/0x170 [ 62.655819] [<ffffffff8177dc6c>] ret_from_fork+0x7c/0xb0 [ 62.655824] [<ffffffff81078ea0>] ? flush_kthread_worker+0x170/0x170 Signed-off-by: Fan Du <fan.du@windriver.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2013-12-01{pktgen, xfrm} Update IPv4 header total len and checksum after tranformationfan.du
commit a553e4a6317b2cfc7659542c10fe43184ffe53da ("[PKTGEN]: IPSEC support") tried to support IPsec ESP transport transformation for pktgen, but acctually this doesn't work at all for two reasons(The orignal transformed packet has bad IPv4 checksum value, as well as wrong auth value, reported by wireshark) - After transpormation, IPv4 header total length needs update, because encrypted payload's length is NOT same as that of plain text. - After transformation, IPv4 checksum needs re-caculate because of payload has been changed. With this patch, armmed pktgen with below cofiguration, Wireshark is able to decrypted ESP packet generated by pktgen without any IPv4 checksum error or auth value error. pgset "flag IPSEC" pgset "flows 1" Signed-off-by: Fan Du <fan.du@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-29pktgen: add needed include fileStephen Rothwell
Fixes this on PowerPC (at least): net/core/pktgen.c: In function 'fill_packet_ipv6': net/core/pktgen.c:2906:3: error: implicit declaration of function 'csum_ipv6_magic' [-Werror=implicit-function-declaration] udph->check = ~csum_ipv6_magic(&iph->saddr, &iph->daddr, udplen, IPPROTO_UDP, 0); ^ Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-27pktgen: Use ip_send_check() to compute checksumThomas Graf
Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-27pktgen: Add UDPCSUM flag to support UDP checksumsThomas Graf
UDP checksums are optional, hence pktgen has been omitting them in favour of performance. The optional flag UDPCSUM enables UDP checksumming. If the output device supports hardware checksumming the skb is prepared and marked CHECKSUM_PARTIAL, otherwise the checksum is generated in software. Signed-off-by: Thomas Graf <tgraf@suug.ch> Cc: Eric Dumazet <edumazet@google.com> Cc: Ben Greear <greearb@candelatech.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-23 09:08:29 +0000