| Age | Commit message (Collapse) | Author |
|---|
|
xps_queue_show is mostly made of an RCU read-side critical section and
calls bitmap_zalloc with GFP_KERNEL in the middle of it. That is not
allowed as this call may sleep and such behaviours aren't allowed in RCU
read-side critical sections. Fix this by using GFP_NOWAIT instead.
Fixes: 5478fcd0f483 ("net: embed nr_ids in the xps maps")
Reported-by: kernel test robot <oliver.sang@intel.com>
Suggested-by: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Most of the xps_cpus_show and xps_rxqs_show functions share the same
logic. Having it in two different functions does not help maintenance.
This patch moves their common logic into a new function, xps_queue_show,
to improve this.
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Now that nr_ids and num_tc are stored in the xps dev_maps, which are RCU
protected, we do not have the need to protect the maps in the rtnl lock.
Move the rtnl unlock up so we reduce the rtnl locking section.
We also increase the reference count on the subordinate device if any,
as we don't want this device to be freed while we use it (now that the
rtnl lock isn't protecting it in the whole function).
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Move the xps maps (xps_cpus_map and xps_rxqs_map) to an array in
net_device. That will simplify a lot the code removing the need for lots
of if/else conditionals as the correct map will be available using its
offset in the array.
This should not modify the xps maps behaviour in any way.
Suggested-by: Alexander Duyck <alexander.duyck@gmail.com>
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Remove the xps possible_mask. It was an optimization but we can just
loop from 0 to nr_ids now that it is embedded in the xps dev_maps. That
simplifies the code a bit.
Suggested-by: Alexander Duyck <alexander.duyck@gmail.com>
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Embed nr_ids (the number of cpu for the xps cpus map, and the number of
rxqs for the xps cpus map) in dev_maps. That will help not accessing out
of bound memory if those values change after dev_maps was allocated.
Suggested-by: Alexander Duyck <alexander.duyck@gmail.com>
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The xps cpus/rxqs map is accessed using dev->num_tc, which is used when
allocating the map. But later updates of dev->num_tc can lead to having
a mismatch between the maps and how they're accessed. In such cases the
map values do not make any sense and out of bound accesses can occur
(that can be easily seen using KASAN).
This patch aims at fixing this by embedding num_tc into the maps, using
the value at the time the map is created. This brings two improvements:
- The maps can be accessed using the embedded num_tc, so we know for
sure we won't have out of bound accesses.
- Checks can be made before accessing the maps so we know the values
retrieved will make sense.
We also update __netif_set_xps_queue to conditionally copy old maps from
dev_maps in the new one only if the number of traffic classes from both
maps match.
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Make the implementations of xps_cpus_show and xps_rxqs_show to converge,
as the two share the same logic but diverted over time. This should not
modify their behaviour but will help future changes and improve
maintenance.
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In net-sysfs, get_netdev_queue_index returns an unsigned int. Some of
its callers use an unsigned long to store the returned value. Update the
code to be consistent, this should only be cosmetic.
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Use bitmap_zalloc instead of zalloc_cpumask_var in xps_cpus_show to
align with xps_rxqs_show. This will improve maintenance and allow us to
factorize the two functions. The function should behave the same.
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch adds a new sysfs attribute to the network device class.
Said attribute provides a per-device control to enable/disable the
threaded mode for all the napi instances of the given network device,
without the need for a device up/down.
User sets it to 1 or 0 to enable or disable threaded mode.
Note: when switching between threaded and the current softirq based mode
for a napi instance, it will not immediately take effect if the napi is
currently being polled. The mode switch will happen for the next time
napi_schedule() is called.
Co-developed-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Co-developed-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Co-developed-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Wei Wang <weiwan@google.com>
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In order to access the suboordinate dev for a device we should be holding
the rtnl_lock when outside of the transmit path. The existing code was not
doing that for the sysfs dump function and as a result we were open to a
possible race.
To resolve that take the rtnl lock prior to accessing the sb_dev field of
the Tx queue and release it after we have retrieved the tc for the queue.
Signed-off-by: Alexander Duyck <alexanderduyck@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Accesses to dev->xps_rxqs_map (when using dev->num_tc) should be
protected by the rtnl lock, like we do for netif_set_xps_queue. I didn't
see an actual bug being triggered, but let's be safe here and take the
rtnl lock while accessing the map in sysfs.
Fixes: 8af2c06ff4b1 ("net-sysfs: Add interface for Rx queue(s) map per Tx queue")
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Two race conditions can be triggered when storing xps rxqs, resulting in
various oops and invalid memory accesses:
1. Calling netdev_set_num_tc while netif_set_xps_queue:
- netif_set_xps_queue uses dev->tc_num as one of the parameters to
compute the size of new_dev_maps when allocating it. dev->tc_num is
also used to access the map, and the compiler may generate code to
retrieve this field multiple times in the function.
- netdev_set_num_tc sets dev->tc_num.
If new_dev_maps is allocated using dev->tc_num and then dev->tc_num
is set to a higher value through netdev_set_num_tc, later accesses to
new_dev_maps in netif_set_xps_queue could lead to accessing memory
outside of new_dev_maps; triggering an oops.
2. Calling netif_set_xps_queue while netdev_set_num_tc is running:
2.1. netdev_set_num_tc starts by resetting the xps queues,
dev->tc_num isn't updated yet.
2.2. netif_set_xps_queue is called, setting up the map with the
*old* dev->num_tc.
2.3. netdev_set_num_tc updates dev->tc_num.
2.4. Later accesses to the map lead to out of bound accesses and
oops.
A similar issue can be found with netdev_reset_tc.
One way of triggering this is to set an iface up (for which the driver
uses netdev_set_num_tc in the open path, such as bnx2x) and writing to
xps_rxqs in a concurrent thread. With the right timing an oops is
triggered.
Both issues have the same fix: netif_set_xps_queue, netdev_set_num_tc
and netdev_reset_tc should be mutually exclusive. We do that by taking
the rtnl lock in xps_rxqs_store.
Fixes: 8af2c06ff4b1 ("net-sysfs: Add interface for Rx queue(s) map per Tx queue")
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Accesses to dev->xps_cpus_map (when using dev->num_tc) should be
protected by the rtnl lock, like we do for netif_set_xps_queue. I didn't
see an actual bug being triggered, but let's be safe here and take the
rtnl lock while accessing the map in sysfs.
Fixes: 184c449f91fe ("net: Add support for XPS with QoS via traffic classes")
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Two race conditions can be triggered when storing xps cpus, resulting in
various oops and invalid memory accesses:
1. Calling netdev_set_num_tc while netif_set_xps_queue:
- netif_set_xps_queue uses dev->tc_num as one of the parameters to
compute the size of new_dev_maps when allocating it. dev->tc_num is
also used to access the map, and the compiler may generate code to
retrieve this field multiple times in the function.
- netdev_set_num_tc sets dev->tc_num.
If new_dev_maps is allocated using dev->tc_num and then dev->tc_num
is set to a higher value through netdev_set_num_tc, later accesses to
new_dev_maps in netif_set_xps_queue could lead to accessing memory
outside of new_dev_maps; triggering an oops.
2. Calling netif_set_xps_queue while netdev_set_num_tc is running:
2.1. netdev_set_num_tc starts by resetting the xps queues,
dev->tc_num isn't updated yet.
2.2. netif_set_xps_queue is called, setting up the map with the
*old* dev->num_tc.
2.3. netdev_set_num_tc updates dev->tc_num.
2.4. Later accesses to the map lead to out of bound accesses and
oops.
A similar issue can be found with netdev_reset_tc.
One way of triggering this is to set an iface up (for which the driver
uses netdev_set_num_tc in the open path, such as bnx2x) and writing to
xps_cpus in a concurrent thread. With the right timing an oops is
triggered.
Both issues have the same fix: netif_set_xps_queue, netdev_set_num_tc
and netdev_reset_tc should be mutually exclusive. We do that by taking
the rtnl lock in xps_cpus_store.
Fixes: 184c449f91fe ("net: Add support for XPS with QoS via traffic classes")
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux
Pull misc fixes from Christian Brauner:
"This contains several fixes which felt worth being combined into a
single branch:
- Use put_nsproxy() instead of open-coding it switch_task_namespaces()
- Kirill's work to unify lifecycle management for all namespaces. The
lifetime counters are used identically for all namespaces types.
Namespaces may of course have additional unrelated counters and
these are not altered. This work allows us to unify the type of the
counters and reduces maintenance cost by moving the counter in one
place and indicating that basic lifetime management is identical
for all namespaces.
- Peilin's fix adding three byte padding to Dmitry's
PTRACE_GET_SYSCALL_INFO uapi struct to prevent an info leak.
- Two smal patches to convert from the /* fall through */ comment
annotation to the fallthrough keyword annotation which I had taken
into my branch and into -next before df561f6688fe ("treewide: Use
fallthrough pseudo-keyword") made it upstream which fixed this
tree-wide.
Since I didn't want to invalidate all testing for other commits I
didn't rebase and kept them"
* tag 'fixes-v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux:
nsproxy: use put_nsproxy() in switch_task_namespaces()
sys: Convert to the new fallthrough notation
signal: Convert to the new fallthrough notation
time: Use generic ns_common::count
cgroup: Use generic ns_common::count
mnt: Use generic ns_common::count
user: Use generic ns_common::count
pid: Use generic ns_common::count
ipc: Use generic ns_common::count
uts: Use generic ns_common::count
net: Use generic ns_common::count
ns: Add a common refcount into ns_common
ptrace: Prevent kernel-infoleak in ptrace_get_syscall_info()
|
|
Fix follow warnings:
[net/core/net-sysfs.c:1161]: (warning) %u in format string (no. 1)
requires 'unsigned int' but the argument type is 'int'.
[net/core/net-sysfs.c:1162]: (warning) %u in format string (no. 1)
requires 'unsigned int' but the argument type is 'int'.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Ye Bin <yebin10@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Switch over network namespaces to use the newly introduced common lifetime
counter.
Network namespaces have an additional counter named "passive". This counter
does not guarantee that the network namespace is not already de-initialized
and so isn't concerned with the actual lifetime of the network namespace;
only the "count" counter is. So the latter is moved into struct ns_common.
Currently every namespace type has its own lifetime counter which is stored
in the specific namespace struct. The lifetime counters are used
identically for all namespaces types. Namespaces may of course have
additional unrelated counters and these are not altered.
This introduces a common lifetime counter into struct ns_common. The
ns_common struct encompasses information that all namespaces share. That
should include the lifetime counter since its common for all of them.
It also allows us to unify the type of the counters across all namespaces.
Most of them use refcount_t but one uses atomic_t and at least one uses
kref. Especially the last one doesn't make much sense since it's just a
wrapper around refcount_t since 2016 and actually complicates cleanup
operations by having to use container_of() to cast the correct namespace
struct out of struct ns_common.
Having the lifetime counter for the namespaces in one place reduces
maintenance cost. Not just because after switching all namespaces over we
will have removed more code than we added but also because the logic is
more easily understandable and we indicate to the user that the basic
lifetime requirements for all namespaces are currently identical.
Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
[christian.brauner@ubuntu.com: rewrite commit]
Link: https://lore.kernel.org/r/159644977635.604812.1319877322927063560.stgit@localhost.localdomain
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
|
|
We must accept an empty mask in store_rps_map(), or we are not able
to disable RPS on a queue.
Fixes: 07bbecb34106 ("net: Restrict receive packets queuing to housekeeping CPUs")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Maciej Żenczykowski <maze@google.com>
Cc: Alex Belits <abelits@marvell.com>
Cc: Nitesh Narayan Lal <nitesh@redhat.com>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Maciej Żenczykowski <maze@google.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Nitesh Narayan Lal <nitesh@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Ingo Molnar:
- Improve uclamp performance by using a static key for the fast path
- Add the "sched_util_clamp_min_rt_default" sysctl, to optimize for
better power efficiency of RT tasks on battery powered devices.
(The default is to maximize performance & reduce RT latencies.)
- Improve utime and stime tracking accuracy, which had a fixed boundary
of error, which created larger and larger relative errors as the
values become larger. This is now replaced with more precise
arithmetics, using the new mul_u64_u64_div_u64() helper in math64.h.
- Improve the deadline scheduler, such as making it capacity aware
- Improve frequency-invariant scheduling
- Misc cleanups in energy/power aware scheduling
- Add sched_update_nr_running tracepoint to track changes to nr_running
- Documentation additions and updates
- Misc cleanups and smaller fixes
* tag 'sched-core-2020-08-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (54 commits)
sched/doc: Factorize bits between sched-energy.rst & sched-capacity.rst
sched/doc: Document capacity aware scheduling
sched: Document arch_scale_*_capacity()
arm, arm64: Fix selection of CONFIG_SCHED_THERMAL_PRESSURE
Documentation/sysctl: Document uclamp sysctl knobs
sched/uclamp: Add a new sysctl to control RT default boost value
sched/uclamp: Fix a deadlock when enabling uclamp static key
sched: Remove duplicated tick_nohz_full_enabled() check
sched: Fix a typo in a comment
sched/uclamp: Remove unnecessary mutex_init()
arm, arm64: Select CONFIG_SCHED_THERMAL_PRESSURE
sched: Cleanup SCHED_THERMAL_PRESSURE kconfig entry
arch_topology, sched/core: Cleanup thermal pressure definition
trace/events/sched.h: fix duplicated word
linux/sched/mm.h: drop duplicated words in comments
smp: Fix a potential usage of stale nr_cpus
sched/fair: update_pick_idlest() Select group with lowest group_util when idle_cpus are equal
sched: nohz: stop passing around unused "ticks" parameter.
sched: Better document ttwu()
sched: Add a tracepoint to track rq->nr_running
...
|
|
When I cat 'tx_timeout' by sysfs, it displays as follows. It's better to
add a newline for easy reading.
root@syzkaller:~# cat /sys/devices/virtual/net/lo/queues/tx-0/tx_timeout
0root@syzkaller:~#
Signed-off-by: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
With the existing implementation of store_rps_map(), packets are queued
in the receive path on the backlog queues of other CPUs irrespective of
whether they are isolated or not. This could add a latency overhead to
any RT workload that is running on the same CPU.
Ensure that store_rps_map() only uses available housekeeping CPUs for
storing the rps_map.
Signed-off-by: Alex Belits <abelits@marvell.com>
Signed-off-by: Nitesh Narayan Lal <nitesh@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20200625223443.2684-4-nitesh@redhat.com
|
|
The assumption that a device node is associated either with the
netdev's device, or the parent of that device, does not hold for all
drivers. E.g. Freescale's DPAA has two layers of platform devices
above the netdev. Instead, recursively walk up the tree from the
netdev, allowing any parent to match against the sought after node.
Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
gro_flush_timeout and napi_defer_hard_irqs can be read
from napi_complete_done() while other cpus write the value,
whithout explicit synchronization.
Use READ_ONCE()/WRITE_ONCE() to annotate the races.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Back in commit 3b47d30396ba ("net: gro: add a per device gro flush timer")
we added the ability to arm one high resolution timer, that we used
to keep not-complete packets in GRO engine a bit longer, hoping that further
frames might be added to them.
Since then, we added the napi_complete_done() interface, and commit
364b6055738b ("net: busy-poll: return busypolling status to drivers")
allowed drivers to avoid re-arming NIC interrupts if we made a promise
that their NAPI poll() handler would be called in the near future.
This infrastructure can be leveraged, thanks to a new device parameter,
which allows to arm the napi hrtimer, instead of re-arming the device
hard IRQ.
We have noticed that on some servers with 32 RX queues or more, the chit-chat
between the NIC and the host caused by IRQ delivery and re-arming could hurt
throughput by ~20% on 100Gbit NIC.
In contrast, hrtimers are using local (percpu) resources and might have lower
cost.
The new tunable, named napi_defer_hard_irqs, is placed in the same hierarchy
than gro_flush_timeout (/sys/class/net/ethX/)
By default, both gro_flush_timeout and napi_defer_hard_irqs are zero.
This patch does not change the prior behavior of gro_flush_timeout
if used alone : NIC hard irqs should be rearmed as before.
One concrete usage can be :
echo 20000 >/sys/class/net/eth1/gro_flush_timeout
echo 10 >/sys/class/net/eth1/napi_defer_hard_irqs
If at least one packet is retired, then we will reset napi counter
to 10 (napi_defer_hard_irqs), ensuring at least 10 periodic scans
of the queue.
On busy queues, this should avoid NIC hard IRQ, while before this patch IRQ
avoidance was only possible if napi->poll() was exhausting its budget
and not call napi_complete_done().
This feature also can be used to work around some non-optimal NIC irq
coalescing strategies.
Having the ability to insert XX usec delays between each napi->poll()
can increase cache efficiency, since we increase batch sizes.
It also keeps serving cpus not idle too long, reducing tail latencies.
Co-developed-by: Luigi Rizzo <lrizzo@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Similar to speed, duplex and dorment, report the testing status
in sysfs.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The variable ret is being initialized with a value that is never read
and it is being updated later with a new value. The initialization is
redundant and can be removed.
Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add a function to change the owner of the queue entries for a network device
when it is moved between network namespaces.
Currently, when moving network devices between network namespaces the
ownership of the corresponding queue sysfs entries are not changed. This leads
to problems when tools try to operate on the corresponding sysfs files. Fix
this.
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add a function to change the owner of a network device when it is moved
between network namespaces.
Currently, when moving network devices between network namespaces the
ownership of the corresponding sysfs entries is not changed. This leads
to problems when tools try to operate on the corresponding sysfs files.
This leads to a bug whereby a network device that is created in a
network namespaces owned by a user namespace will have its corresponding
sysfs entry owned by the root user of the corresponding user namespace.
If such a network device has to be moved back to the host network
namespace the permissions will still be set to the user namespaces. This
means unprivileged users can e.g. trigger uevents for such incorrectly
owned devices. They can also modify the settings of the device itself.
Both of these things are unwanted.
For example, workloads will create network devices in the host network
namespace. Other tools will then proceed to move such devices between
network namespaces owner by other user namespaces. While the ownership
of the device itself is updated in
net/core/net-sysfs.c:dev_change_net_namespace() the corresponding sysfs
entry for the device is not:
drwxr-xr-x 5 nobody nobody 0 Jan 25 18:08 .
drwxr-xr-x 9 nobody nobody 0 Jan 25 18:08 ..
-r--r--r-- 1 nobody nobody 4096 Jan 25 18:09 addr_assign_type
-r--r--r-- 1 nobody nobody 4096 Jan 25 18:09 addr_len
-r--r--r-- 1 nobody nobody 4096 Jan 25 18:09 address
-r--r--r-- 1 nobody nobody 4096 Jan 25 18:09 broadcast
-rw-r--r-- 1 nobody nobody 4096 Jan 25 18:09 carrier
-r--r--r-- 1 nobody nobody 4096 Jan 25 18:09 carrier_changes
-r--r--r-- 1 nobody nobody 4096 Jan 25 18:09 carrier_down_count
-r--r--r-- 1 nobody nobody 4096 Jan 25 18:09 carrier_up_count
-r--r--r-- 1 nobody nobody 4096 Jan 25 18:09 dev_id
-r--r--r-- 1 nobody nobody 4096 Jan 25 18:09 dev_port
-r--r--r-- 1 nobody nobody 4096 Jan 25 18:09 dormant
-r--r--r-- 1 nobody nobody 4096 Jan 25 18:09 duplex
-rw-r--r-- 1 nobody nobody 4096 Jan 25 18:09 flags
-rw-r--r-- 1 nobody nobody 4096 Jan 25 18:09 gro_flush_timeout
-rw-r--r-- 1 nobody nobody 4096 Jan 25 18:09 ifalias
-r--r--r-- 1 nobody nobody 4096 Jan 25 18:09 ifindex
-r--r--r-- 1 nobody nobody 4096 Jan 25 18:09 iflink
-r--r--r-- 1 nobody nobody 4096 Jan 25 18:09 link_mode
-rw-r--r-- 1 nobody nobody 4096 Jan 25 18:09 mtu
-r--r--r-- 1 nobody nobody 4096 Jan 25 18:09 name_assign_type
-rw-r--r-- 1 nobody nobody 4096 Jan 25 18:09 netdev_group
-r--r--r-- 1 nobody nobody 4096 Jan 25 18:09 operstate
-r--r--r-- 1 nobody nobody 4096 Jan 25 18:09 phys_port_id
-r--r--r-- 1 nobody nobody 4096 Jan 25 18:09 phys_port_name
-r--r--r-- 1 nobody nobody 4096 Jan 25 18:09 phys_switch_id
drwxr-xr-x 2 nobody nobody 0 Jan 25 18:09 power
-rw-r--r-- 1 nobody nobody 4096 Jan 25 18:09 proto_down
drwxr-xr-x 4 nobody nobody 0 Jan 25 18:09 queues
-r--r--r-- 1 nobody nobody 4096 Jan 25 18:09 speed
drwxr-xr-x 2 nobody nobody 0 Jan 25 18:09 statistics
lrwxrwxrwx 1 nobody nobody 0 Jan 25 18:08 subsystem -> ../../../../class/net
-rw-r--r-- 1 nobody nobody 4096 Jan 25 18:09 tx_queue_len
-r--r--r-- 1 nobody nobody 4096 Jan 25 18:09 type
-rw-r--r-- 1 nobody nobody 4096 Jan 25 18:08 uevent
However, if a device is created directly in the network namespace then
the device's sysfs permissions will be correctly updated:
drwxr-xr-x 5 root root 0 Jan 25 18:12 .
drwxr-xr-x 9 nobody nobody 0 Jan 25 18:08 ..
-r--r--r-- 1 root root 4096 Jan 25 18:12 addr_assign_type
-r--r--r-- 1 root root 4096 Jan 25 18:12 addr_len
-r--r--r-- 1 root root 4096 Jan 25 18:12 address
-r--r--r-- 1 root root 4096 Jan 25 18:12 broadcast
-rw-r--r-- 1 root root 4096 Jan 25 18:12 carrier
-r--r--r-- 1 root root 4096 Jan 25 18:12 carrier_changes
-r--r--r-- 1 root root 4096 Jan 25 18:12 carrier_down_count
-r--r--r-- 1 root root 4096 Jan 25 18:12 carrier_up_count
-r--r--r-- 1 root root 4096 Jan 25 18:12 dev_id
-r--r--r-- 1 root root 4096 Jan 25 18:12 dev_port
-r--r--r-- 1 root root 4096 Jan 25 18:12 dormant
-r--r--r-- 1 root root 4096 Jan 25 18:12 duplex
-rw-r--r-- 1 root root 4096 Jan 25 18:12 flags
-rw-r--r-- 1 root root 4096 Jan 25 18:12 gro_flush_timeout
-rw-r--r-- 1 root root 4096 Jan 25 18:12 ifalias
-r--r--r-- 1 root root 4096 Jan 25 18:12 ifindex
-r--r--r-- 1 root root 4096 Jan 25 18:12 iflink
-r--r--r-- 1 root root 4096 Jan 25 18:12 link_mode
-rw-r--r-- 1 root root 4096 Jan 25 18:12 mtu
-r--r--r-- 1 root root 4096 Jan 25 18:12 name_assign_type
-rw-r--r-- 1 root root 4096 Jan 25 18:12 netdev_group
-r--r--r-- 1 root root 4096 Jan 25 18:12 operstate
-r--r--r-- 1 root root 4096 Jan 25 18:12 phys_port_id
-r--r--r-- 1 root root 4096 Jan 25 18:12 phys_port_name
-r--r--r-- 1 root root 4096 Jan 25 18:12 phys_switch_id
drwxr-xr-x 2 root root 0 Jan 25 18:12 power
-rw-r--r-- 1 root root 4096 Jan 25 18:12 proto_down
drwxr-xr-x 4 root root 0 Jan 25 18:12 queues
-r--r--r-- 1 root root 4096 Jan 25 18:12 speed
drwxr-xr-x 2 root root 0 Jan 25 18:12 statistics
lrwxrwxrwx 1 nobody nobody 0 Jan 25 18:12 subsystem -> ../../../../class/net
-rw-r--r-- 1 root root 4096 Jan 25 18:12 tx_queue_len
-r--r--r-- 1 root root 4096 Jan 25 18:12 type
-rw-r--r-- 1 root root 4096 Jan 25 18:12 uevent
Now, when creating a network device in a network namespace owned by a
user namespace and moving it to the host the permissions will be set to
the id that the user namespace root user has been mapped to on the host
leading to all sorts of permission issues:
458752
drwxr-xr-x 5 458752 458752 0 Jan 25 18:12 .
drwxr-xr-x 9 root root 0 Jan 25 18:08 ..
-r--r--r-- 1 458752 458752 4096 Jan 25 18:12 addr_assign_type
-r--r--r-- 1 458752 458752 4096 Jan 25 18:12 addr_len
-r--r--r-- 1 458752 458752 4096 Jan 25 18:12 address
-r--r--r-- 1 458752 458752 4096 Jan 25 18:12 broadcast
-rw-r--r-- 1 458752 458752 4096 Jan 25 18:12 carrier
-r--r--r-- 1 458752 458752 4096 Jan 25 18:12 carrier_changes
-r--r--r-- 1 458752 458752 4096 Jan 25 18:12 carrier_down_count
-r--r--r-- 1 458752 458752 4096 Jan 25 18:12 carrier_up_count
-r--r--r-- 1 458752 458752 4096 Jan 25 18:12 dev_id
-r--r--r-- 1 458752 458752 4096 Jan 25 18:12 dev_port
-r--r--r-- 1 458752 458752 4096 Jan 25 18:12 dormant
-r--r--r-- 1 458752 458752 4096 Jan 25 18:12 duplex
-rw-r--r-- 1 458752 458752 4096 Jan 25 18:12 flags
-rw-r--r-- 1 458752 458752 4096 Jan 25 18:12 gro_flush_timeout
-rw-r--r-- 1 458752 458752 4096 Jan 25 18:12 ifalias
-r--r--r-- 1 458752 458752 4096 Jan 25 18:12 ifindex
-r--r--r-- 1 458752 458752 4096 Jan 25 18:12 iflink
-r--r--r-- 1 458752 458752 4096 Jan 25 18:12 link_mode
-rw-r--r-- 1 458752 458752 4096 Jan 25 18:12 mtu
-r--r--r-- 1 458752 458752 4096 Jan 25 18:12 name_assign_type
-rw-r--r-- 1 458752 458752 4096 Jan 25 18:12 netdev_group
-r--r--r-- 1 458752 458752 4096 Jan 25 18:12 operstate
-r--r--r-- 1 458752 458752 4096 Jan 25 18:12 phys_port_id
-r--r--r-- 1 458752 458752 4096 Jan 25 18:12 phys_port_name
-r--r--r-- 1 458752 458752 4096 Jan 25 18:12 phys_switch_id
drwxr-xr-x 2 458752 458752 0 Jan 25 18:12 power
-rw-r--r-- 1 458752 458752 4096 Jan 25 18:12 proto_down
drwxr-xr-x 4 458752 458752 0 Jan 25 18:12 queues
-r--r--r-- 1 458752 458752 4096 Jan 25 18:12 speed
drwxr-xr-x 2 458752 458752 0 Jan 25 18:12 statistics
lrwxrwxrwx 1 root root 0 Jan 25 18:12 subsystem -> ../../../../class/net
-rw-r--r-- 1 458752 458752 4096 Jan 25 18:12 tx_queue_len
-r--r--r-- 1 458752 458752 4096 Jan 25 18:12 type
-rw-r--r-- 1 458752 458752 4096 Jan 25 18:12 uevent
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Dev_hold has to be called always in rx_queue_add_kobject.
Otherwise usage count drops below 0 in case of failure in
kobject_init_and_add.
Fixes: b8eb718348b8 ("net-sysfs: Fix reference count leak in rx|netdev_queue_add_kobject")
Reported-by: syzbot <syzbot+30209ea299c09d8785c9@syzkaller.appspotmail.com>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: David Miller <davem@davemloft.net>
Cc: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Jouni Hogander <jouni.hogander@unikie.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Dev_hold has to be called always in netdev_queue_add_kobject.
Otherwise usage count drops below 0 in case of failure in
kobject_init_and_add.
Fixes: b8eb718348b8 ("net-sysfs: Fix reference count leak in rx|netdev_queue_add_kobject")
Reported-by: Hulk Robot <hulkci@huawei.com>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: David Miller <davem@davemloft.net>
Cc: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
kobject_put() should only be called in error path.
Fixes: b8eb718348b8 ("net-sysfs: Fix reference count leak in rx|netdev_queue_add_kobject")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Jouni Hogander <jouni.hogander@unikie.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
kobject_init_and_add takes reference even when it fails. This has
to be given up by the caller in error handling. Otherwise memory
allocated by kobject_init_and_add is never freed. Originally found
by Syzkaller:
BUG: memory leak
unreferenced object 0xffff8880679f8b08 (size 8):
comm "netdev_register", pid 269, jiffies 4294693094 (age 12.132s)
hex dump (first 8 bytes):
72 78 2d 30 00 36 20 d4 rx-0.6 .
backtrace:
[<000000008c93818e>] __kmalloc_track_caller+0x16e/0x290
[<000000001f2e4e49>] kvasprintf+0xb1/0x140
[<000000007f313394>] kvasprintf_const+0x56/0x160
[<00000000aeca11c8>] kobject_set_name_vargs+0x5b/0x140
[<0000000073a0367c>] kobject_init_and_add+0xd8/0x170
[<0000000088838e4b>] net_rx_queue_update_kobjects+0x152/0x560
[<000000006be5f104>] netdev_register_kobject+0x210/0x380
[<00000000e31dab9d>] register_netdevice+0xa1b/0xf00
[<00000000f68b2465>] __tun_chr_ioctl+0x20d5/0x3dd0
[<000000004c50599f>] tun_chr_ioctl+0x2f/0x40
[<00000000bbd4c317>] do_vfs_ioctl+0x1c7/0x1510
[<00000000d4c59e8f>] ksys_ioctl+0x99/0xb0
[<00000000946aea81>] __x64_sys_ioctl+0x78/0xb0
[<0000000038d946e5>] do_syscall_64+0x16f/0x580
[<00000000e0aa5d8f>] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[<00000000285b3d1a>] 0xffffffffffffffff
Cc: David Miller <davem@davemloft.net>
Cc: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Jouni Hogander <jouni.hogander@unikie.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 of the license or at
your option any later version
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-or-later
has been chosen to replace the boilerplate/reference in 3029 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Pull networking updates from David Miller:
"Highlights:
1) Support AES128-CCM ciphers in kTLS, from Vakul Garg.
2) Add fib_sync_mem to control the amount of dirty memory we allow to
queue up between synchronize RCU calls, from David Ahern.
3) Make flow classifier more lockless, from Vlad Buslov.
4) Add PHY downshift support to aquantia driver, from Heiner
Kallweit.
5) Add SKB cache for TCP rx and tx, from Eric Dumazet. This reduces
contention on SLAB spinlocks in heavy RPC workloads.
6) Partial GSO offload support in XFRM, from Boris Pismenny.
7) Add fast link down support to ethtool, from Heiner Kallweit.
8) Use siphash for IP ID generator, from Eric Dumazet.
9) Pull nexthops even further out from ipv4/ipv6 routes and FIB
entries, from David Ahern.
10) Move skb->xmit_more into a per-cpu variable, from Florian
Westphal.
11) Improve eBPF verifier speed and increase maximum program size,
from Alexei Starovoitov.
12) Eliminate per-bucket spinlocks in rhashtable, and instead use bit
spinlocks. From Neil Brown.
13) Allow tunneling with GUE encap in ipvs, from Jacky Hu.
14) Improve link partner cap detection in generic PHY code, from
Heiner Kallweit.
15) Add layer 2 encap support to bpf_skb_adjust_room(), from Alan
Maguire.
16) Remove SKB list implementation assumptions in SCTP, your's truly.
17) Various cleanups, optimizations, and simplifications in r8169
driver. From Heiner Kallweit.
18) Add memory accounting on TX and RX path of SCTP, from Xin Long.
19) Switch PHY drivers over to use dynamic featue detection, from
Heiner Kallweit.
20) Support flow steering without masking in dpaa2-eth, from Ioana
Ciocoi.
21) Implement ndo_get_devlink_port in netdevsim driver, from Jiri
Pirko.
22) Increase the strict parsing of current and future netlink
attributes, also export such policies to userspace. From Johannes
Berg.
23) Allow DSA tag drivers to be modular, from Andrew Lunn.
24) Remove legacy DSA probing support, also from Andrew Lunn.
25) Allow ll_temac driver to be used on non-x86 platforms, from Esben
Haabendal.
26) Add a generic tracepoint for TX queue timeouts to ease debugging,
from Cong Wang.
27) More indirect call optimizations, from Paolo Abeni"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1763 commits)
cxgb4: Fix error path in cxgb4_init_module
net: phy: improve pause mode reporting in phy_print_status
dt-bindings: net: Fix a typo in the phy-mode list for ethernet bindings
net: macb: Change interrupt and napi enable order in open
net: ll_temac: Improve error message on error IRQ
net/sched: remove block pointer from common offload structure
net: ethernet: support of_get_mac_address new ERR_PTR error
net: usb: smsc: fix warning reported by kbuild test robot
staging: octeon-ethernet: Fix of_get_mac_address ERR_PTR check
net: dsa: support of_get_mac_address new ERR_PTR error
net: dsa: sja1105: Fix status initialization in sja1105_get_ethtool_stats
vrf: sit mtu should not be updated when vrf netdev is the link
net: dsa: Fix error cleanup path in dsa_init_module
l2tp: Fix possible NULL pointer dereference
taprio: add null check on sched_nest to avoid potential null pointer dereference
net: mvpp2: cls: fix less than zero check on a u32 variable
net_sched: sch_fq: handle non connected flows
net_sched: sch_fq: do not assume EDT packets are ordered
net: hns3: use devm_kcalloc when allocating desc_cb
net: hns3: some cleanup for struct hns3_enet_ring
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core/kobject updates from Greg KH:
"Here is the "big" set of driver core patches for 5.2-rc1
There are a number of ACPI patches in here as well, as Rafael said
they should go through this tree due to the driver core changes they
required. They have all been acked by the ACPI developers.
There are also a number of small subsystem-specific changes in here,
due to some changes to the kobject core code. Those too have all been
acked by the various subsystem maintainers.
As for content, it's pretty boring outside of the ACPI changes:
- spdx cleanups
- kobject documentation updates
- default attribute groups for kobjects
- other minor kobject/driver core fixes
All have been in linux-next for a while with no reported issues"
* tag 'driver-core-5.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (47 commits)
kobject: clean up the kobject add documentation a bit more
kobject: Fix kernel-doc comment first line
kobject: Remove docstring reference to kset
firmware_loader: Fix a typo ("syfs" -> "sysfs")
kobject: fix dereference before null check on kobj
Revert "driver core: platform: Fix the usage of platform device name(pdev->name)"
init/config: Do not select BUILD_BIN2C for IKCONFIG
Provide in-kernel headers to make extending kernel easier
kobject: Improve doc clarity kobject_init_and_add()
kobject: Improve docs for kobject_add/del
driver core: platform: Fix the usage of platform device name(pdev->name)
livepatch: Replace klp_ktype_patch's default_attrs with groups
cpufreq: schedutil: Replace default_attrs field with groups
padata: Replace padata_attr_type default_attrs field with groups
irqdesc: Replace irq_kobj_type's default_attrs field with groups
net-sysfs: Replace ktype default_attrs field with groups
block: Replace all ktype default_attrs with groups
samples/kobject: Replace foo_ktype's default_attrs field with groups
kobject: Add support for default attribute groups to kobj_type
driver core: Postpone DMA tear-down until after devres release for probe failure
...
|
|
The kobj_type default_attrs field is being replaced by the
default_groups field. Replace the default_attrs fields in rx_queue_ktype
and netdev_queue_ktype with default_groups. Use the ATTRIBUTE_GROUPS
macro to create rx_queue_default_groups and netdev_queue_default_groups.
This patch was tested by verifying that the sysfs files for the
attributes in the default groups were created.
Signed-off-by: Kimberly Brown <kimbrownkd@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Conflict resolution of af_smc.c from Stephen Rothwell.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This reverts commit 6b70fc94afd165342876e53fc4b2f7d085009945.
The reverted bugfix will cause another issue.
Reported by syzbot+6024817a931b2830bc93@syzkaller.appspotmail.com.
See https://syzkaller.appspot.com/x/log.txt?x=1737671b200000 for
details.
Signed-off-by: Wang Hai <wanghai26@huawei.com>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
|
|
We prefer static_branch_unlikely() over static_key_false() these days.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When registering struct net_device, it will call
register_netdevice ->
netdev_register_kobject ->
device_initialize(dev);
dev_set_name(dev, "%s", ndev->name)
device_add(dev)
register_queue_kobjects(ndev)
In netdev_register_kobject(), if device_add(dev) or
register_queue_kobjects(ndev) failed. Register_netdevice()
will return error, causing netdev_freemem(ndev) to be
called to free net_device, however put_device(&dev->dev)->..->
kobject_cleanup() won't be called, resulting in a memory leak.
syzkaller report this:
BUG: memory leak
unreferenced object 0xffff8881f4fad168 (size 8):
comm "syz-executor.0", pid 3575, jiffies 4294778002 (age 20.134s)
hex dump (first 8 bytes):
77 70 61 6e 30 00 ff ff wpan0...
backtrace:
[<000000006d2d91d7>] kstrdup_const+0x3d/0x50 mm/util.c:73
[<00000000ba9ff953>] kvasprintf_const+0x112/0x170 lib/kasprintf.c:48
[<000000005555ec09>] kobject_set_name_vargs+0x55/0x130 lib/kobject.c:281
[<0000000098d28ec3>] dev_set_name+0xbb/0xf0 drivers/base/core.c:1915
[<00000000b7553017>] netdev_register_kobject+0xc0/0x410 net/core/net-sysfs.c:1727
[<00000000c826a797>] register_netdevice+0xa51/0xeb0 net/core/dev.c:8711
[<00000000857bfcfd>] cfg802154_update_iface_num.isra.2+0x13/0x90 [ieee802154]
[<000000003126e453>] ieee802154_llsec_fill_key_id+0x1d5/0x570 [ieee802154]
[<00000000e4b3df51>] 0xffffffffc1500e0e
[<00000000b4319776>] platform_drv_probe+0xc6/0x180 drivers/base/platform.c:614
[<0000000037669347>] really_probe+0x491/0x7c0 drivers/base/dd.c:509
[<000000008fed8862>] driver_probe_device+0xdc/0x240 drivers/base/dd.c:671
[<00000000baf52041>] device_driver_attach+0xf2/0x130 drivers/base/dd.c:945
[<00000000c7cc8dec>] __driver_attach+0x10e/0x210 drivers/base/dd.c:1022
[<0000000057a757c2>] bus_for_each_dev+0x154/0x1e0 drivers/base/bus.c:304
[<000000005f5ae04b>] bus_add_driver+0x427/0x5e0 drivers/base/bus.c:645
Reported-by: Hulk Robot <hulkci@huawei.com>
Fixes: 1fa5ae857bb1 ("driver core: get rid of struct device's bus_id string array")
Signed-off-by: Wang Hai <wanghai26@huawei.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In netdev_queue_add_kobject and rx_queue_add_kobject,
if sysfs_create_group failed, kobject_put will call
netdev_queue_release to decrease dev refcont, however
dev_hold has not be called. So we will see this while
unregistering dev:
unregister_netdevice: waiting for bcsh0 to become free. Usage count = -1
Reported-by: Hulk Robot <hulkci@huawei.com>
Fixes: d0d668371679 ("net: don't decrement kobj reference count on init failure")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
|
|
Switch to bitmap_zalloc() to show clearly what we are allocating.
Besides that it returns pointer of bitmap type instead of opaque void *.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
syzkaller report this:
BUG: memory leak
unreferenced object 0xffff88837a71a500 (size 256):
comm "syz-executor.2", pid 9770, jiffies 4297825125 (age 17.843s)
hex dump (first 32 bytes):
00 00 00 00 ad 4e ad de ff ff ff ff 00 00 00 00 .....N..........
ff ff ff ff ff ff ff ff 20 c0 ef 86 ff ff ff ff ........ .......
backtrace:
[<00000000db12624b>] netdev_register_kobject+0x124/0x2e0 net/core/net-sysfs.c:1751
[<00000000dc49a994>] register_netdevice+0xcc1/0x1270 net/core/dev.c:8516
[<00000000e5f3fea0>] tun_set_iff drivers/net/tun.c:2649 [inline]
[<00000000e5f3fea0>] __tun_chr_ioctl+0x2218/0x3d20 drivers/net/tun.c:2883
[<000000001b8ac127>] vfs_ioctl fs/ioctl.c:46 [inline]
[<000000001b8ac127>] do_vfs_ioctl+0x1a5/0x10e0 fs/ioctl.c:690
[<0000000079b269f8>] ksys_ioctl+0x89/0xa0 fs/ioctl.c:705
[<00000000de649beb>] __do_sys_ioctl fs/ioctl.c:712 [inline]
[<00000000de649beb>] __se_sys_ioctl fs/ioctl.c:710 [inline]
[<00000000de649beb>] __x64_sys_ioctl+0x74/0xb0 fs/ioctl.c:710
[<000000007ebded1e>] do_syscall_64+0xc8/0x580 arch/x86/entry/common.c:290
[<00000000db315d36>] entry_SYSCALL_64_after_hwframe+0x49/0xbe
[<00000000115be9bb>] 0xffffffffffffffff
It should call kset_unregister to free 'dev->queues_kset'
in error path of register_queue_kobjects, otherwise will cause a mem leak.
Reported-by: Hulk Robot <hulkci@huawei.com>
Fixes: 1d24eb4815d1 ("xps: Transmit Packet Steering")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Now that we have a dedicated NDO for getting a port's parent ID, get rid
of SWITCHDEV_ATTR_ID_PORT_PARENT_ID and convert all callers to use the
NDO exclusively. This is a preliminary change to getting rid of
switchdev_ops eventually.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In preparation for getting rid of switchdev_ops, create a dedicated NDO
operation for getting the port's parent identifier. There are
essentially two classes of drivers that need to implement getting the
port's parent ID which are VF/PF drivers with a built-in switch, and
pure switchdev drivers such as mlxsw, ocelot, dsa etc.
We introduce a helper function: dev_get_port_parent_id() which supports
recursion into the lower devices to obtain the first port's parent ID.
Convert the bridge, core and ipv4 multicast routing code to check for
such ndo_get_port_parent_id() and call the helper function when valid
before falling back to switchdev_port_attr_get(). This will allow us to
convert all relevant drivers in one go instead of having to implement
both switchdev_port_attr_get() and ndo_get_port_parent_id() operations,
then get rid of switchdev_port_attr_get().
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In order to pass extack together with NETDEV_PRE_UP notifications, it's
necessary to route the extack to __dev_open() from diverse (possibly
indirect) callers. One prominent API through which the notification is
invoked is dev_change_flags().
Therefore extend dev_change_flags() with and extra extack argument and
update all users. Most of the calls end up just encoding NULL, but
several sites (VLAN, ipvlan, VRF, rtnetlink) do have extack available.
Since the function declaration line is changed anyway, name the other
function arguments to placate checkpatch.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
