summaryrefslogtreecommitdiff
path: root/net/core/neighbour.c
AgeCommit message (Collapse)Author
2015-12-03net/neighbour: fix crash at dumping device-agnostic proxy entriesKonstantin Khlebnikov
Proxy entries could have null pointer to net-device. Signed-off-by: Konstantin Khlebnikov <koct9i@gmail.com> Fixes: 84920c1420e2 ("net: Allow ipv6 proxies and arp proxies be shown with iproute2") Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-17net: use skb_clone to avoid alloc_pages failure.Martin Zhang
1. new skb only need dst and ip address(v4 or v6). 2. skb_copy may need high order pages, which is very rare on long running server. Signed-off-by: Junwei Zhang <linggao.zjw@alibaba-inc.com> Signed-off-by: Martin Zhang <martinbj2008@gmail.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-07net: Add support for filtering neigh dump by device indexDavid Ahern
Add support for filtering neighbor dumps by device by adding the NDA_IFINDEX attribute to the dump request. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Reviewed-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-29net: Add support for filtering neigh dump by master deviceDavid Ahern
Add support for filtering neighbor dumps by master device by adding the NDA_MASTER attribute to the dump request. A new netlink flag, NLM_F_DUMP_FILTERED, is added to indicate the kernel supports the request and output is filtered as requested. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Acked-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-10net: add explicit logging and stat for neighbour table overflowRick Jones
Add an explicit neighbour table overflow message (ratelimited) and statistic to make diagnosing neighbour table overflows tractable in the wild. Diagnosing a neighbour table overflow can be quite difficult in the wild because there is no explicit dmesg logged. Callers to neighbour code seem to use net_dbg_ratelimit when the neighbour call fails which means the "base message" is not emitted and the callback suppressed messages from the ratelimiting can end-up juxtaposed with unrelated messages. Further, a forced garbage collection will increment a stat on each call whether it was successful in freeing-up a table entry or not, so that statistic is only a hint. So, add a net_info_ratelimited message and explicit statistic to the neighbour code. Signed-off-by: Rick Jones <rick.jones2@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-24Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts: drivers/net/ethernet/mellanox/mlx4/main.c net/packet/af_packet.c Both conflicts were cases of simple overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-21neigh: do not modify unlinked entriesJulian Anastasov
The lockless lookups can return entry that is unlinked. Sometimes they get reference before last neigh_cleanup_and_release, sometimes they do not need reference. Later, any modification attempts may result in the following problems: 1. entry is not destroyed immediately because neigh_update can start the timer for dead entry, eg. on change to NUD_REACHABLE state. As result, entry lives for some time but is invisible and out of control. 2. __neigh_event_send can run in parallel with neigh_destroy while refcnt=0 but if timer is started and expired refcnt can reach 0 for second time leading to second neigh_destroy and possible crash. Thanks to Eric Dumazet and Ying Xue for their work and analyze on the __neigh_event_send change. Fixes: 767e97e1e0db ("neigh: RCU conversion of struct neighbour") Fixes: a263b3093641 ("ipv4: Make neigh lookups directly in output packet path.") Fixes: 6fd6ce2056de ("ipv6: Do not depend on rt->n in ip6_finish_output2().") Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: Ying Xue <ying.xue@windriver.com> Signed-off-by: Julian Anastasov <ja@ssi.bg> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-21neigh: Better handling of transition to NUD_PROBE stateErik Kline
[1] When entering NUD_PROBE state via neigh_update(), perhaps received from userspace, correctly (re)initialize the probes count to zero. This is useful for forcing revalidation of a neighbor (for example if the host is attempting to do DNA [IPv4 4436, IPv6 6059]). [2] Notify listeners when a neighbor goes into NUD_PROBE state. By sending notifications on entry to NUD_PROBE state listeners get more timely warnings of imminent connectivity issues. The current notifications on entry to NUD_STALE have somewhat limited usefulness: NUD_STALE is a perfectly normal state, as is NUD_DELAY, whereas notifications on entry to NUD_FAILURE come after a neighbor reachability problem has been confirmed (typically after three probes). Signed-off-by: Erik Kline <ek@google.com> Acked-By: Lorenzo Colitti <lorenzo@google.com> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-20net: neighbour: Add mcast_resolicit to configure the number of multicast ↵YOSHIFUJI Hideaki/吉藤英明
resolicitations in PROBE state. We send unicast neighbor (ARP or NDP) solicitations ucast_probes times in PROBE state. Zhu Yanjun reported that some implementation does not reply against them and the entry will become FAILED, which is undesirable. We had been dealt with such nodes by sending multicast probes mcast_ solicit times after unicast probes in PROBE state. In 2003, I made a change not to send them to improve compatibility with IPv6 NDP. Let's introduce per-protocol per-interface sysctl knob "mcast_ reprobe" to configure the number of multicast (re)solicitation for reconfirmation in PROBE state. The default is 0, since we have been doing so for 10+ years. Reported-by: Zhu Yanjun <Yanjun.Zhu@windriver.com> CC: Ulf Samuelsson <ulf.samuelsson@ericsson.com> Signed-off-by: YOSHIFUJI Hideaki <hideaki.yoshifuji@miraclelinux.com> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-12net: Kill hold_net release_netEric W. Biederman
hold_net and release_net were an idea that turned out to be useless. The code has been disabled since 2008. Kill the code it is long past due. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-08neigh: Use neigh table index for neigh_packet_xmitEric W. Biederman
Remove a little bit of unnecessary work when transmitting a packet with neigh_packet_xmit. Use the neighbour table index not the address family as a parameter. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-04neigh: Add helper function neigh_xmitEric W. Biederman
For MPLS I am building the code so that either the neighbour mac address can be specified or we can have a next hop in ipv4 or ipv6. The kind of next hop we have is indicated by the neighbour table pointer. A neighbour table pointer of NULL is a link layer address. A non-NULL neighbour table pointer indicates which neighbour table and thus which address family the next hop address is in that we need to look up. The code either sends a packet directly or looks up the appropriate neighbour table entry and sends the packet. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-04neigh: Factor out ___neigh_lookup_norefEric W. Biederman
While looking at the mpls code I found myself writing yet another version of neigh_lookup_noref. We currently have __ipv4_lookup_noref and __ipv6_lookup_noref. So to make my work a little easier and to make it a smidge easier to verify/maintain the mpls code in the future I stopped and wrote ___neigh_lookup_noref. Then I rewote __ipv4_lookup_noref and __ipv6_lookup_noref in terms of this new function. I tested my new version by verifying that the same code is generated in ip_finish_output2 and ip6_finish_output2 where these functions are inlined. To get to ___neigh_lookup_noref I added a new neighbour cache table function key_eq. So that the static size of the key would be available. I also added __neigh_lookup_noref for people who want to to lookup a neighbour table entry quickly but don't know which neibhgour table they are going to look up. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-02neigh: Don't require a dst in neigh_resolve_outputEric W. Biederman
Having a dst helps a little bit for teql but is fundamentally unnecessary and there are code paths where a dst is not available that it would be nice to use the neighbour cache. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-02neigh: Don't require dst in neigh_hh_initEric W. Biederman
- Add protocol to neigh_tbl so that dst->ops->protocol is not needed - Acquire the device from neigh->dev This results in a neigh_hh_init that will cache the samve values regardless of the packets flowing through it. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-02neigh: Move neigh_compat_output into ax25_ip.cEric W. Biederman
The only caller is now is ax25_neigh_construct so move neigh_compat_output into ax25_ip.c make it static and rename it ax25_neigh_output. Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-hams@vger.kernel.org Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-18netlink: Fix bugs in nlmsg_end() conversions.David S. Miller
Commit 053c095a82cf ("netlink: make nlmsg_end() and genlmsg_end() void") didn't catch all of the cases where callers were breaking out on the return value being equal to zero, which they no longer should when zero means success. Fix all such cases. Reported-by: Marcel Holtmann <marcel@holtmann.org> Reported-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-18netlink: make nlmsg_end() and genlmsg_end() voidJohannes Berg
Contrary to common expectations for an "int" return, these functions return only a positive value -- if used correctly they cannot even return 0 because the message header will necessarily be in the skb. This makes the very common pattern of if (genlmsg_end(...) < 0) { ... } be a whole bunch of dead code. Many places also simply do return nlmsg_end(...); and the caller is expected to deal with it. This also commonly (at least for me) causes errors, because it is very common to write if (my_function(...)) /* error condition */ and if my_function() does "return nlmsg_end()" this is of course wrong. Additionally, there's not a single place in the kernel that actually needs the message length returned, and if anyone needs it later then it'll be very easy to just use skb->len there. Remove this, and make the functions void. This removes a bunch of dead code as described above. The patch adds lines because I did - return nlmsg_end(...); + nlmsg_end(...); + return 0; I could have preserved all the function's return values by returning skb->len, but instead I've audited all the places calling the affected functions and found that none cared. A few places actually compared the return value with <= 0 in dump functionality, but that could just be changed to < 0 with no change in behaviour, so I opted for the more efficient version. One instance of the error I've made numerous times now is also present in net/phonet/pn_netlink.c in the route_dumpit() function - it didn't check for <0 or <=0 and thus broke out of the loop every single time. I've preserved this since it will (I think) have caused the messages to userspace to be formatted differently with just a single message for every SKB returned to userspace. It's possible that this isn't needed for the tools that actually use this, but I don't even know what they are so couldn't test that changing this behaviour would be acceptable. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-14neighbour: fix base_reachable_time(_ms) not effective immediatly when changedJean-Francois Remy
When setting base_reachable_time or base_reachable_time_ms on a specific interface through sysctl or netlink, the reachable_time value is not updated. This means that neighbour entries will continue to be updated using the old value until it is recomputed in neigh_period_work (which recomputes the value every 300*HZ). On systems with HZ equal to 1000 for instance, it means 5mins before the change is effective. This patch changes this behavior by recomputing reachable_time after each set on base_reachable_time or base_reachable_time_ms. The new value will become effective the next time the neighbour's timer is triggered. Changes are made in two places: the netlink code for set and the sysctl handling code. For sysctl, I use a proc_handler. The ipv6 network code does provide its own handler but it already refreshes reachable_time correctly so it's not an issue. Any other user of neighbour which provide its own handlers must refresh reachable_time. Signed-off-by: Jean-Francois Remy <jeff@melix.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-11neigh: remove dynamic neigh table registration supportWANG Cong
Currently there are only three neigh tables in the whole kernel: arp table, ndisc table and decnet neigh table. What's more, we don't support registering multiple tables per family. Therefore we can just make these tables statically built-in. Cc: David S. Miller <davem@davemloft.net> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-29neigh: optimize neigh_parms_release()Nicolas Dichtel
In neigh_parms_release() we loop over all entries to find the entry given in argument and being able to remove it from the list. By using a double linked list, we can avoid this loop. Here are some numbers with 30 000 dummy interfaces configured: Before the patch: $ time rmmod dummy real 2m0.118s user 0m0.000s sys 1m50.048s After the patch: $ time rmmod dummy real 1m9.970s user 0m0.000s sys 0m47.976s Suggested-by: Thierry Herbelot <thierry.herbelot@6wind.com> Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-28neighbour : fix ndm_type type error issueJun Zhao
ndm_type means L3 address type, in neighbour proxy and vxlan, it's RTN_UNICAST. NDA_DST is for netlink TLV type, hence it's not right value in this context. Signed-off-by: Jun Zhao <mypopydev@gmail.com> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-14neigh: sysctl - simplify address calculation of gc_* variablesMathias Krause
The code in neigh_sysctl_register() relies on a specific layout of struct neigh_table, namely that the 'gc_*' variables are directly following the 'parms' member in a specific order. The code, though, expresses this in the most ugly way. Get rid of the ugly casts and use the 'tbl' pointer to get a handle to the table. This way we can refer to the 'gc_*' variables directly. Similarly seen in the grsecurity patch, written by Brad Spengler. Signed-off-by: Mathias Krause <minipli@googlemail.com> Cc: Brad Spengler <spender@grsecurity.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-13neigh: set nud_state to NUD_INCOMPLETE when probing router reachabilityDuan Jiong
Since commit 7e98056964("ipv6: router reachability probing"), a router falls into NUD_FAILED will be probed. Now if function rt6_select() selects a router which neighbour state is NUD_FAILED, and at the same time function rt6_probe() changes the neighbour state to NUD_PROBE, then function dst_neigh_output() can directly send packets, but actually the neighbour still is unreachable. If we set nud_state to NUD_INCOMPLETE instead NUD_PROBE, packets will not be sent out until the neihbour is reachable. In addition, because the route should be probes with a single NS, so we must set neigh->probes to neigh_max_probes(), then the neigh timer timeout and function neigh_timer_handler() will not send other NS Messages. Signed-off-by: Duan Jiong <duanj.fnst@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-05Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts: drivers/net/wireless/ath/ath9k/recv.c drivers/net/wireless/mwifiex/pcie.c net/ipv6/sit.c The SIT driver conflict consists of a bug fix being done by hand in 'net' (missing u64_stats_init()) whilst in 'net-next' a helper was created (netdev_alloc_pcpu_stats()) which takes care of this. The two wireless conflicts were overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-27neigh: recompute reachabletime before returning from neigh_periodic_work()Duan Jiong
If the neigh table's entries is less than gc_thresh1, the function will return directly, and the reachabletime will not be recompute, so the reachabletime can be guessed. Signed-off-by: Duan Jiong <duanj.fnst@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-27neigh: directly goto out after setting nud_state to NUD_FAILEDDuan Jiong
Because those following if conditions will not be matched. Signed-off-by: Duan Jiong <duanj.fnst@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-26neigh: probe application via netlink in NUD_PROBETimo Teräs
iproute2 arpd seems to expect this as there's code and comments to handle netlink probes with NUD_PROBE set. It is used to flush the arpd cached mappings. opennhrp instead turns off unicast probes (so it can handle all neighbour discovery). Without this change it will not see NUD_PROBE probes and cannot reconfirm the mapping. Thus currently neigh entry will just fail and can cause few packets dropped until broadcast discovery is restarted. Earlier discussion on the subject: http://marc.info/?t=139305877100001&r=1&w=2 Signed-off-by: Timo Teräs <timo.teras@iki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-22neigh: fix setting of default gc_* valuesJiri Pirko
This patch fixes bug introduced by: commit 1d4c8c29841b9991cdf3c7cc4ba7f96a94f104ca "neigh: restore old behaviour of default parms values" The thing is that in neigh_sysctl_register, extra1 and extra2 which were previously set for NEIGH_VAR_GC_* are overwritten. That leads to nonsense int limits for gc_* variables. So fix this by not touching extra* fields for gc_* variables. Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-22net/neighbour: queue work on power efficient wqviresh kumar
Workqueue used in neighbour layer have no real dependency of scheduling these on the cpu which scheduled them. On a idle system, it is observed that an idle cpu wakes up many times just to service this work. It would be better if we can schedule it on a cpu which the scheduler believes to be the most appropriate one. This patch replaces normal workqueues with power efficient versions. This doesn't change existing behavior of code unless CONFIG_WQ_POWER_EFFICIENT is enabled. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-15neigh: split lines for NEIGH_VAR_SET so they are not too longJiri Pirko
introduced by: commit 1f9248e5606afc6485255e38ad57bdac08fa7711 "neigh: convert parms to an array" Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-14net: replace macros net_random and net_srandom with direct calls to prandomAruna-Hewapathirane
This patch removes the net_random and net_srandom macros and replaces them with direct calls to the prandom ones. As new commits only seem to use prandom_u32 there is no use to keep them around. This change makes it easier to grep for users of prandom_u32. Signed-off-by: Aruna-Hewapathirane <aruna.hewapathirane@gmail.com> Suggested-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-06Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts: drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_pf.c net/ipv6/ip6_tunnel.c net/ipv6/ip6_vti.c ipv6 tunnel statistic bug fixes conflicting with consolidation into generic sw per-cpu net stats. qlogic conflict between queue counting bug fix and the addition of multiple MAC address support. Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-31vlan: Fix header ops passthru when doing TX VLAN offload.David S. Miller
When the vlan code detects that the real device can do TX VLAN offloads in hardware, it tries to arrange for the real device's header_ops to be invoked directly. But it does so illegally, by simply hooking the real device's header_ops up to the VLAN device. This doesn't work because we will end up invoking a set of header_ops routines which expect a device type which matches the real device, but will see a VLAN device instead. Fix this by providing a pass-thru set of header_ops which will arrange to pass the proper real device instead. To facilitate this add a dev_rebuild_header(). There are implementations which provide a ->cache and ->create but not a ->rebuild (f.e. PLIP). So we need a helper function just like dev_hard_header() to avoid crashes. Use this helper in the one existing place where the header_ops->rebuild was being invoked, the neighbour code. With lots of help from Florian Westphal. Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-18Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts: drivers/net/ethernet/intel/i40e/i40e_main.c drivers/net/macvtap.c Both minor merge hassles, simple overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-17neigh: Netlink notification for administrative NUD state changeBob Gilligan
The neighbour code sends up an RTM_NEWNEIGH netlink notification if the NUD state of a neighbour cache entry is changed by a timer (e.g. from REACHABLE to STALE), even if the lladdr of the entry has not changed. But an administrative change to the the NUD state of a neighbour cache entry that does not change the lladdr (e.g. via "ip -4 neigh change ... nud ...") does not trigger a netlink notification. This means that netlink listeners will not hear about administrative NUD state changes such as from a resolved state to PERMANENT. This patch changes the neighbor code to generate an RTM_NEWNEIGH message when the NUD state of an entry is changed administratively. Signed-off-by: Bob Gilligan <gilligan@aristanetworks.com> Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-11ipv6: router reachability probingJiri Benc
RFC 4191 states in 3.5: When a host avoids using any non-reachable router X and instead sends a data packet to another router Y, and the host would have used router X if router X were reachable, then the host SHOULD probe each such router X's reachability by sending a single Neighbor Solicitation to that router's address. A host MUST NOT probe a router's reachability in the absence of useful traffic that the host would have sent to the router if it were reachable. In any case, these probes MUST be rate-limited to no more than one per minute per router. Currently, when the neighbour corresponding to a router falls into NUD_FAILED, it's never considered again. Introduce a new rt6_nud_state value, RT6_NUD_FAIL_PROBE, which suggests the route should not be used but should be probed with a single NS. The probe is ratelimited by the existing code. To better distinguish meanings of the failure values, rename RT6_NUD_FAIL_SOFT to RT6_NUD_FAIL_DO_RR. Signed-off-by: Jiri Benc <jbenc@redhat.com> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-10neigh: use neigh_parms_net() to get struct neigh_parms->net pointerJiri Pirko
This fixes compile error when CONFIG_NET_NS is not set. Introduced by: commit 1d4c8c29841b9991cdf3c7cc4ba7f96a94f104ca "neigh: restore old behaviour of default parms values" Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-09neigh: ipv6: respect default values set before an address is assigned to deviceJiri Pirko
Make the behaviour similar to ipv4. This will allow user to set sysctl default neigh param values and these values will be respected even by devices registered before (that ones what do not have address set yet). Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-09neigh: restore old behaviour of default parms valuesJiri Pirko
Previously inet devices were only constructed when addresses are added. Therefore the default neigh parms values they get are the ones at the time of these operations. Now that we're creating inet devices earlier, this changes the behaviour of default neigh parms values in an incompatible way (see bug #8519). This patch creates a compromise by setting the default values at the same point as before but only for those that have not been explicitly set by the user since the inet device's creation. Introduced by: commit 8030f54499925d073a88c09f30d5d844fb1b3190 Author: Herbert Xu <herbert@gondor.apana.org.au> Date: Thu Feb 22 01:53:47 2007 +0900 [IPV4] devinet: Register inetdev earlier. Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-09neigh: use tbl->family to distinguish ipv4 from ipv6Jiri Pirko
Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-09neigh: wrap proc dointvec functionsJiri Pirko
This will be needed later on to provide better management of default values. Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-09neigh: convert parms to an arrayJiri Pirko
This patch converts the neigh param members to an array. This allows easier manipulation which will be needed later on to provide better management of default values. Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-26net: neighbour: use source address of last enqueued packet for solicitationHannes Frederic Sowa
Currently we always use the first member of the arp_queue to determine the sender ip address of the arp packet (or in case of IPv6 - source address of the ndisc packet). This skb is fixed as long as the queue is not drained by a complete purge because of a timeout or by a successful response. If the first packet enqueued on the arp_queue is from a local application with a manually set source address and the to be discovered system does some kind of uRPF checks on the source address in the arp packet the resolving process hangs until a timeout and restarts. This hurts communication with the participating network node. This could be mitigated a bit if we use the latest enqueued skb's source address for the resolving process, which is not as static as the arp_queue's head. This change of the source address could result in better recovery of a failed solicitation. Cc: "David S. Miller" <davem@davemloft.net> Cc: Julian Anastasov <ja@ssi.bg> Reviewed-by: Julian Anastasov <ja@ssi.bg> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-03net: neighbour: Remove CONFIG_ARPDTim Gardner
This config option is superfluous in that it only guards a call to neigh_app_ns(). Enabling CONFIG_ARPD by default has no change in behavior. There will now be call to __neigh_notify() for each ARP resolution, which has no impact unless there is a user space daemon waiting to receive the notification, i.e., the case for which CONFIG_ARPD was designed anyways. Suggested-by: Eric W. Biederman <ebiederm@xmission.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru> Cc: James Morris <jmorris@namei.org> Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org> Cc: Patrick McHardy <kaber@trash.net> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Gao feng <gaofeng@cn.fujitsu.com> Cc: Joe Perches <joe@perches.com> Cc: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: Tim Gardner <tim.gardner@canonical.com> Reviewed-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Merge net into net-next to setup some infrastructure Eric Dumazet needs for usbnet changes. Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-02neighbour: populate neigh_parms on alloc before calling ndo_neigh_setupVeaceslav Falico
dev->ndo_neigh_setup() might need some of the values of neigh_parms, so populate them before calling it. Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-26neigh: prevent overflowing params in /proc/sys/net/ipv4/neigh/Francesco Fusco
Without this patch, the fields app_solicit, gc_thresh1, gc_thresh2, gc_thresh3, proxy_qlen, ucast_solicit, mcast_solicit could have assumed negative values when setting large numbers. Signed-off-by: Francesco Fusco <ffusco@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-01neighbour: fix a race in neigh_destroy()Eric Dumazet
There is a race in neighbour code, because neigh_destroy() uses skb_queue_purge(&neigh->arp_queue) without holding neighbour lock, while other parts of the code assume neighbour rwlock is what protects arp_queue Convert all skb_queue_purge() calls to the __skb_queue_purge() variant Use __skb_queue_head_init() instead of skb_queue_head_init() to make clear we do not use arp_queue.lock And hold neigh->lock in neigh_destroy() to close the race. Reported-by: Joe Jin <joe.jin@oracle.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-19neigh: disallow un-init_net to change thresh of neighGao feng
thresh and interval are global resources, only init net can change them. Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>