summaryrefslogtreecommitdiff
path: root/net/core/ethtool.c
AgeCommit message (Collapse)Author
2017-04-14net: Add ESP offload featuresSteffen Klassert
This patch adds netdev features to configure IPsec offloads. Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2017-03-09ethtool: add CRC32 as an RSS hash functionJakub Kicinski
CRC32 engines are usually easily available in hardware and generate OK spread for RSS hash. Add CRC32 RSS hash function to ethtool API. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-02sched/headers: Prepare to move signal wakeup & sigpending methods from ↵Ingo Molnar
<linux/sched.h> into <linux/sched/signal.h> Fix up affected files that include this signal functionality via sched.h. Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-02-07Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
The conflict was an interaction between a bug fix in the netvsc driver in 'net' and an optimization of the RX path in 'net-next'. Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-03net: remove support for per driver ndo_busy_poll()Eric Dumazet
We added generic support for busy polling in NAPI layer in linux-4.5 No network driver uses ndo_busy_poll() anymore, we can get rid of the pointer in struct net_device_ops, and its use in sk_busy_loop() Saves NETIF_F_BUSY_POLL features bit. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-03ethtool: do not vzalloc(0) on registers dumpStanislaw Gruszka
If ->get_regs_len() callback return 0, we allocate 0 bytes of memory, what print ugly warning in dmesg, which can be found further below. This happen on mac80211 devices where ieee80211_get_regs_len() just return 0 and driver only fills ethtool_regs structure and actually do not provide any dump. However I assume this can happen on other drivers i.e. when for some devices driver provide regs dump and for others do not. Hence preventing to to print warning in ethtool code seems to be reasonable. ethtool: vmalloc: allocation failure: 0 bytes, mode:0x24080c2(GFP_KERNEL|__GFP_HIGHMEM|__GFP_ZERO) <snip> Call Trace: [<ffffffff813bde47>] dump_stack+0x63/0x8c [<ffffffff811b0a1f>] warn_alloc+0x13f/0x170 [<ffffffff811f0476>] __vmalloc_node_range+0x1e6/0x2c0 [<ffffffff811f0874>] vzalloc+0x54/0x60 [<ffffffff8169986c>] dev_ethtool+0xb4c/0x1b30 [<ffffffff816adbb1>] dev_ioctl+0x181/0x520 [<ffffffff816714d2>] sock_do_ioctl+0x42/0x50 <snip> Mem-Info: active_anon:435809 inactive_anon:173951 isolated_anon:0 active_file:835822 inactive_file:196932 isolated_file:0 unevictable:0 dirty:8 writeback:0 unstable:0 slab_reclaimable:157732 slab_unreclaimable:10022 mapped:83042 shmem:306356 pagetables:9507 bounce:0 free:130041 free_pcp:1080 free_cma:0 Node 0 active_anon:1743236kB inactive_anon:695804kB active_file:3343288kB inactive_file:787728kB unevictable:0kB isolated(anon):0kB isolated(file):0kB mapped:332168kB dirty:32kB writeback:0kB shmem:0kB shmem_thp: 0kB shmem_pmdmapped: 0kB anon_thp: 1225424kB writeback_tmp:0kB unstable:0kB pages_scanned:0 all_unreclaimable? no Node 0 DMA free:15900kB min:136kB low:168kB high:200kB active_anon:0kB inactive_anon:0kB active_file:0kB inactive_file:0kB unevictable:0kB writepending:0kB present:15984kB managed:15900kB mlocked:0kB slab_reclaimable:0kB slab_unreclaimable:0kB kernel_stack:0kB pagetables:0kB bounce:0kB free_pcp:0kB local_pcp:0kB free_cma:0kB lowmem_reserve[]: 0 3187 7643 7643 Node 0 DMA32 free:419732kB min:28124kB low:35152kB high:42180kB active_anon:541180kB inactive_anon:248988kB active_file:1466388kB inactive_file:389632kB unevictable:0kB writepending:0kB present:3370280kB managed:3290932kB mlocked:0kB slab_reclaimable:217184kB slab_unreclaimable:4180kB kernel_stack:160kB pagetables:984kB bounce:0kB free_pcp:2236kB local_pcp:660kB free_cma:0kB lowmem_reserve[]: 0 0 4456 4456 Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-31net: ethtool: convert large order kmalloc allocations to vzallocAlexei Starovoitov
under memory pressure 'ethtool -S' command may warn: [ 2374.385195] ethtool: page allocation failure: order:4, mode:0x242c0c0 [ 2374.405573] CPU: 12 PID: 40211 Comm: ethtool Not tainted [ 2374.423071] Call Trace: [ 2374.423076] [<ffffffff8148cb29>] dump_stack+0x4d/0x64 [ 2374.423080] [<ffffffff811667cb>] warn_alloc_failed+0xeb/0x150 [ 2374.423082] [<ffffffff81169cd3>] ? __alloc_pages_direct_compact+0x43/0xf0 [ 2374.423084] [<ffffffff8116a25c>] __alloc_pages_nodemask+0x4dc/0xbf0 [ 2374.423091] [<ffffffffa0023dc2>] ? cmd_exec+0x722/0xcd0 [mlx5_core] [ 2374.423095] [<ffffffff811b3dcc>] alloc_pages_current+0x8c/0x110 [ 2374.423097] [<ffffffff81168859>] alloc_kmem_pages+0x19/0x90 [ 2374.423099] [<ffffffff81186e5e>] kmalloc_order_trace+0x2e/0xe0 [ 2374.423101] [<ffffffff811c0084>] __kmalloc+0x204/0x220 [ 2374.423105] [<ffffffff816c269e>] dev_ethtool+0xe4e/0x1f80 [ 2374.423106] [<ffffffff816b967e>] ? dev_get_by_name_rcu+0x5e/0x80 [ 2374.423108] [<ffffffff816d6926>] dev_ioctl+0x156/0x560 [ 2374.423111] [<ffffffff811d4c68>] ? mem_cgroup_commit_charge+0x78/0x3c0 [ 2374.423117] [<ffffffff8169d542>] sock_do_ioctl+0x42/0x50 [ 2374.423119] [<ffffffff8169d9c3>] sock_ioctl+0x1b3/0x250 [ 2374.423121] [<ffffffff811f0f42>] do_vfs_ioctl+0x92/0x580 [ 2374.423123] [<ffffffff8100222b>] ? do_audit_syscall_entry+0x4b/0x70 [ 2374.423124] [<ffffffff8100287c>] ? syscall_trace_enter_phase1+0xfc/0x120 [ 2374.423126] [<ffffffff811f14a9>] SyS_ioctl+0x79/0x90 [ 2374.423127] [<ffffffff81002bb0>] do_syscall_64+0x50/0xa0 [ 2374.423129] [<ffffffff817e19bc>] entry_SYSCALL64_slow_path+0x25/0x25 ~1160 mlx5 counters ~= order 4 allocation which is unlikely to succeed under memory pressure. Convert them to vzalloc() as ethtool_get_regs() does. Also take care of drivers without counters similar to commit 67ae7cf1eeda ("ethtool: Allow zero-length register dumps again") and reduce warn_on to warn_on_once. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-18net: ethtool: Initialize buffer when querying device channel settingsEran Ben Elisha
Ethtool channels respond struct was uninitialized when querying device channel boundaries settings. As a result, unreported fields by the driver hold garbage. This may cause sending unsupported params to driver. Fixes: 8bf368620486 ('ethtool: ensure channel counts are within bounds ...') Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Tariq Toukan <tariqt@mellanox.com> CC: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-26Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
udplite conflict is resolved by taking what 'net-next' did which removed the backlog receive method assignment, since it is no longer necessary. Two entries were added to the non-priv ethtool operations switch statement, one in 'net' and one in 'net-next, so simple overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-25net: ethtool: don't require CAP_NET_ADMIN for ETHTOOL_GLINKSETTINGSMiroslav Lichvar
The ETHTOOL_GLINKSETTINGS command is deprecating the ETHTOOL_GSET command and likewise it shouldn't require the CAP_NET_ADMIN capability. Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-24ethtool: Protect {get, set}_phy_tunable with PHY device mutexFlorian Fainelli
PHY drivers should be able to rely on the caller of {get,set}_tunable to have acquired the PHY device mutex, in order to both serialize against concurrent calls of these functions, but also against PHY state machine changes. All ethtool PHY-level functions do this, except {get,set}_tunable, so we make them consistent here as well. We need to update the Microsemi PHY driver in the same commit to avoid introducing either deadlocks, or lack of proper locking. Fixes: 968ad9da7e0e ("ethtool: Implements ETHTOOL_PHY_GTUNABLE/ETHTOOL_PHY_STUNABLE") Fixes: 310d9ad57ae0 ("net: phy: Add downshift get/set support in Microsemi PHYs driver") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Allan W. Nielsen <allan.nielsen@microsemi.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-18ethtool: Core impl for ETHTOOL_PHY_DOWNSHIFT tunableRaju Lakkaraju
Adding validation support for the ETHTOOL_PHY_DOWNSHIFT. Functional implementation needs to be done in the individual PHY drivers. Signed-off-by: Raju Lakkaraju <Raju.Lakkaraju@microsemi.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Allan W. Nielsen <allan.nielsen@microsemi.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-18ethtool: Implements ETHTOOL_PHY_GTUNABLE/ETHTOOL_PHY_STUNABLERaju Lakkaraju
Adding get_tunable/set_tunable function pointer to the phy_driver structure, and uses these function pointers to implement the ETHTOOL_PHY_GTUNABLE/ETHTOOL_PHY_STUNABLE ioctls. Signed-off-by: Raju Lakkaraju <Raju.Lakkaraju@microsemi.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Allan W. Nielsen <allan.nielsen@microsemi.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-03sctp: Add GSO supportMarcelo Ricardo Leitner
SCTP has this pecualiarity that its packets cannot be just segmented to (P)MTU. Its chunks must be contained in IP segments, padding respected. So we can't just generate a big skb, set gso_size to the fragmentation point and deliver it to IP layer. This patch takes a different approach. SCTP will now build a skb as it would be if it was received using GRO. That is, there will be a cover skb with protocol headers and children ones containing the actual segments, already segmented to a way that respects SCTP RFCs. With that, we can tell skb_segment() to just split based on frag_list, trusting its sizes are already in accordance. This way SCTP can benefit from GSO and instead of passing several packets through the stack, it can pass a single large packet. v2: - Added support for receiving GSO frames, as requested by Dave Miller. - Clear skb->cb if packet is GSO (otherwise it's not used by SCTP) - Added heuristics similar to what we have in TCP for not generating single GSO packets that fills cwnd. v3: - consider sctphdr size in skb_gso_transport_seglen() - rebased due to 5c7cdf339af5 ("gso: Remove arbitrary checks for unsupported GSO") Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Tested-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-20net: define gso types for IPx over IPv4 and IPv6Tom Herbert
This patch defines two new GSO definitions SKB_GSO_IPXIP4 and SKB_GSO_IPXIP6 along with corresponding NETIF_F_GSO_IPXIP4 and NETIF_F_GSO_IPXIP6. These are used to described IP in IP tunnel and what the outer protocol is. The inner protocol can be deduced from other GSO types (e.g. SKB_GSO_TCPV4 and SKB_GSO_TCPV6). The GSO types of SKB_GSO_IPIP and SKB_GSO_SIT are removed (these are both instances of SKB_GSO_IPXIP4). SKB_GSO_IPXIP6 will be used when support for GSO with IP encapsulation over IPv6 is added. Signed-off-by: Tom Herbert <tom@herbertland.com> Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-18net: ethtool: export conversion function between u32 and link modePhilippe Reynes
The function convert_legacy_u32_to_link_mode and convert_link_mode_to_legacy_u32 may be used outside of ethtool.c. We rename them to ethtool_convert_... and export them, so we could use them in others drivers and modules. Signed-off-by: Philippe Reynes <tremyfr@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-14GSO: Support partial segmentation offloadAlexander Duyck
This patch adds support for something I am referring to as GSO partial. The basic idea is that we can support a broader range of devices for segmentation if we use fixed outer headers and have the hardware only really deal with segmenting the inner header. The idea behind the naming is due to the fact that everything before csum_start will be fixed headers, and everything after will be the region that is handled by hardware. With the current implementation it allows us to add support for the following GSO types with an inner TSO_MANGLEID or TSO6 offload: NETIF_F_GSO_GRE NETIF_F_GSO_GRE_CSUM NETIF_F_GSO_IPIP NETIF_F_GSO_SIT NETIF_F_UDP_TUNNEL NETIF_F_UDP_TUNNEL_CSUM In the case of hardware that already supports tunneling we may be able to extend this further to support TSO_TCPV4 without TSO_MANGLEID if the hardware can support updating inner IPv4 headers. Signed-off-by: Alexander Duyck <aduyck@mirantis.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-14GSO: Add GSO type for fixed IPv4 IDAlexander Duyck
This patch adds support for TSO using IPv4 headers with a fixed IP ID field. This is meant to allow us to do a lossless GRO in the case of TCP flows that use a fixed IP ID such as those that convert IPv6 header to IPv4 headers. In addition I am adding a feature that for now I am referring to TSO with IP ID mangling. Basically when this flag is enabled the device has the option to either output the flow with incrementing IP IDs or with a fixed IP ID regardless of what the original IP ID ordering was. This is useful in cases where the DF bit is set and we do not care if the original IP ID value is maintained. Signed-off-by: Alexander Duyck <aduyck@mirantis.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-14ethtool: Add support for toggling any of the GSO offloadsAlexander Duyck
The strings were missing for several of the GSO offloads that are available. This patch provides the missing strings so that we can toggle or query any of them via the ethtool command. Signed-off-by: Alexander Duyck <aduyck@mirantis.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-16ethtool: Set cmd field in ETHTOOL_GLINKSETTINGS response to wrong nwordsBen Hutchings
When the ETHTOOL_GLINKSETTINGS implementation finds that userland is using the wrong number of words of link mode bitmaps (or is trying to find out the right numbers) it sets the cmd field to 0 in the response structure. This is inconsistent with the implementation of every other ethtool command, so let's remove that inconsistency before it gets into a stable release. Fixes: 3f1ac7a700d03 ("net: ethtool: add new ETHTOOL_xLINKSETTINGS API") Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-25net: ethtool: remove unused __ethtool_get_settingsDavid Decotigny
replaced by __ethtool_get_link_ksettings. Signed-off-by: David Decotigny <decot@googlers.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-25net: ethtool: add new ETHTOOL_xLINKSETTINGS APIDavid Decotigny
This patch defines a new ETHTOOL_GLINKSETTINGS/SLINKSETTINGS API, handled by the new get_link_ksettings/set_link_ksettings callbacks. This API provides support for most legacy ethtool_cmd fields, adds support for larger link mode masks (up to 4064 bits, variable length), and removes ethtool_cmd deprecated fields (transceiver/maxrxpkt/maxtxpkt). This API is deprecating the legacy ETHTOOL_GSET/SSET API and provides the following backward compatibility properties: - legacy ethtool with legacy drivers: no change, still using the get_settings/set_settings callbacks. - legacy ethtool with new get/set_link_ksettings drivers: the new driver callbacks are used, data internally converted to legacy ethtool_cmd. ETHTOOL_GSET will return only the 1st 32b of each link mode mask. ETHTOOL_SSET will fail if user tries to set the ethtool_cmd deprecated fields to non-0 (transceiver/maxrxpkt/maxtxpkt). A kernel warning is logged if driver sets higher bits. - future ethtool with legacy drivers: no change, still using the get_settings/set_settings callbacks, internally converted to new data structure. Deprecated fields (transceiver/maxrxpkt/maxtxpkt) will be ignored and seen as 0 from user space. Note that that "future" ethtool tool will not allow changes to these deprecated fields. - future ethtool with new drivers: direct call to the new callbacks. By "future" ethtool, what is meant is: - query: first try ETHTOOL_GLINKSETTINGS, and revert to ETHTOOL_GSET if fails - set: query first and remember which of ETHTOOL_GLINKSETTINGS or ETHTOOL_GSET was successful + if ETHTOOL_GLINKSETTINGS was successful, then change config with ETHTOOL_SLINKSETTINGS. A failure there is final (do not try ETHTOOL_SSET). + otherwise ETHTOOL_GSET was successful, change config with ETHTOOL_SSET. A failure there is final (do not try ETHTOOL_SLINKSETTINGS). The interaction user/kernel via the new API requires a small ETHTOOL_GLINKSETTINGS handshake first to agree on the length of the link mode bitmaps. If kernel doesn't agree with user, it returns the bitmap length it is expecting from user as a negative length (and cmd field is 0). When kernel and user agree, kernel returns valid info in all fields (ie. link mode length > 0 and cmd is ETHTOOL_GLINKSETTINGS). Data structure crossing user/kernel boundary is 32/64-bit agnostic. Converted internally to a legal kernel bitmap. The internal __ethtool_get_settings kernel helper will gradually be replaced by __ethtool_get_link_ksettings by the time the first "link_settings" drivers start to appear. So this patch doesn't change it, it will be removed before it needs to be changed. Signed-off-by: David Decotigny <decot@googlers.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-19net/ethtool: support set coalesce per queueKan Liang
This patch implements sub command ETHTOOL_SCOALESCE for ioctl ETHTOOL_PERQUEUE. It introduces an interface set_per_queue_coalesce to set coalesce of each masked queue to device driver. The wanted coalesce information are stored in "data" for each masked queue, which can copy from userspace. If it fails to set coalesce to device driver, the value which already set to specific queue will be tried to rollback. Signed-off-by: Kan Liang <kan.liang@intel.com> Reviewed-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-19net/ethtool: support get coalesce per queueKan Liang
This patch implements sub command ETHTOOL_GCOALESCE for ioctl ETHTOOL_PERQUEUE. It introduces an interface get_per_queue_coalesce to get coalesce of each masked queue from device driver. Then the interrupt coalescing parameters will be copied back to user space one by one. Signed-off-by: Kan Liang <kan.liang@intel.com> Reviewed-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-19net/ethtool: introduce a new ioctl for per queue settingKan Liang
Introduce a new ioctl ETHTOOL_PERQUEUE for per queue parameters setting. The following patches will enable some SUB_COMMANDs for per queue setting. Signed-off-by: Kan Liang <kan.liang@intel.com> Reviewed-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-17net: add tc offload feature flagJohn Fastabend
Its useful to turn off the qdisc offload feature at a per device level. This gives us a big hammer to enable/disable offloading. More fine grained control (i.e. per rule) may be supported later. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-16ethtool: ensure channel counts are within bounds during SCHANNELSKeller, Jacob E
Add a sanity check to ensure that all requested channel sizes are within bounds, which should reduce errors in driver implementation. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-16ethtool: correctly ensure {GS}CHANNELS doesn't conflict with GS{RXFH}Keller, Jacob E
Ethernet drivers implementing both {GS}RXFH and {GS}CHANNELS ethtool ops incorrectly allow SCHANNELS when it would conflict with the settings from SRXFH. This occurs because it is not possible for drivers to understand whether their Rx flow indirection table has been configured or is in the default state. In addition, drivers currently behave in various ways when increasing the number of Rx channels. Some drivers will always destroy the Rx flow indirection table when this occurs, whether it has been set by the user or not. Other drivers will attempt to preserve the table even if the user has never modified it from the default driver settings. Neither of these situation is desirable because it leads to unexpected behavior or loss of user configuration. The correct behavior is to simply return -EINVAL when SCHANNELS would conflict with the current Rx flow table settings. However, it should only do so if the current settings were modified by the user. If we required that the new settings never conflict with the current (default) Rx flow settings, we would force users to first reduce their Rx flow settings and then reduce the number of Rx channels. This patch proposes a solution implemented in net/core/ethtool.c which ensures that all drivers behave correctly. It checks whether the RXFH table has been configured to non-default settings, and stores this information in a private netdev flag. When the number of channels is requested to change, it first ensures that the current Rx flow table is not going to assign flows to now disabled channels. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-06ethtool: Declare netdev_rss_key as __read_mostly.Kim Jones
netdev_rss_key is written to once and thereafter is read by drivers when they are initialising. The fact that it is mostly read and not written to makes it a candidate for a __read_mostly declaration. Signed-off-by: Kim Jones <kim-marie.jones@intel.com> Signed-off-by: Alan Carey <alan.carey@intel.com> Acked-by: Rami Rosen <rami.rosen@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-31ethtool: Add phy statisticsAndrew Lunn
Ethernet PHYs can maintain statistics, for example errors while idle and receive errors. Add an ethtool mechanism to retrieve these statistics, using the same model as MAC statistics. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-15net: Rename NETIF_F_ALL_CSUM to NETIF_F_CSUM_MASKTom Herbert
The name NETIF_F_ALL_CSUM is a misnomer. This does not correspond to the set of features for offloading all checksums. This is a mask of the checksum offload related features bits. It is incorrect to set both NETIF_F_HW_CSUM and NETIF_F_IP_CSUM or NETIF_F_IPV6 at the same time for features of a device. This patch: - Changes instances of NETIF_F_ALL_CSUM to NETIF_F_CSUM_MASK (where NETIF_F_ALL_CSUM is being used as a mask). - Changes bonding, sfc/efx, ipvlan, macvlan, vlan, and team drivers to use NEITF_F_HW_CSUM in features list instead of NETIF_F_ALL_CSUM. Signed-off-by: Tom Herbert <tom@herbertland.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-15sctp: Rename NETIF_F_SCTP_CSUM to NETIF_F_SCTP_CRCTom Herbert
The SCTP checksum is really a CRC and is very different from the standards 1's complement checksum that serves as the checksum for IP protocols. This offload interface is also very different. Rename NETIF_F_SCTP_CSUM to NETIF_F_SCTP_CRC to highlight these differences. The term CSUM should be reserved in the stack to refer to the standard 1's complement IP checksum. Signed-off-by: Tom Herbert <tom@herbertland.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-14ethtool: Use kcalloc instead of kmalloc for ethtool_get_stringsJoe Perches
It seems that kernel memory can leak into userspace by a kmalloc, ethtool_get_strings, then copy_to_user sequence. Avoid this by using kcalloc to zero fill the copied buffer. Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-11net/ethtool: Add current supported tunable optionsHadar Hen Zion
Add strings array of the current supported tunable options. Signed-off-by: Hadar Hen Zion <hadarh@mellanox.com> Reviewed-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-01Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts: drivers/net/phy/amd-xgbe-phy.c drivers/net/wireless/iwlwifi/Kconfig include/net/mac80211.h iwlwifi/Kconfig and mac80211.h were both trivial overlapping changes. The drivers/net/phy/amd-xgbe-phy.c file got removed in 'net-next' and the bug fix that happened on the 'net' side is already integrated into the rest of the amd-xgbe driver. Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-01Revert "net: core: 'ethtool' issue with querying phy settings"David S. Miller
This reverts commit f96dee13b8e10f00840124255bed1d8b4c6afd6f. It isn't right, ethtool is meant to manage one PHY instance per netdevice at a time, and this is selected by the SET command. Therefore by definition the GET command must only return the settings for the configured and selected PHY. Reported-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts: drivers/net/ethernet/cadence/macb.c drivers/net/phy/phy.c include/linux/skbuff.h net/ipv4/tcp.c net/switchdev/switchdev.c Switchdev was a case of RTNH_H_{EXTERNAL --> OFFLOAD} renaming overlapping with net-next changes of various sorts. phy.c was a case of two changes, one adding a local variable to a function whilst the second was removing one. tcp.c overlapped a deadlock fix with the addition of new tcp_info statistic values. macb.c involved the addition of two zyncq device entries. skbuff.h involved adding back ipv4_daddr to nf_bridge_info whilst net-next changes put two other existing members of that struct into a union. Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-22net: core: 'ethtool' issue with querying phy settingsArun Parameswaran
When trying to configure the settings for PHY1, using commands like 'ethtool -s eth0 phyad 1 speed 100', the 'ethtool' seems to modify other settings apart from the speed of the PHY1, in the above case. The ethtool seems to query the settings for PHY0, and use this as the base to apply the new settings to the PHY1. This is causing the other settings of the PHY 1 to be wrongly configured. The issue is caused by the '_ethtool_get_settings()' API, which gets called because of the 'ETHTOOL_GSET' command, is clearing the 'cmd' pointer (of type 'struct ethtool_cmd') by calling memset. This clears all the parameters (if any) passed for the 'ETHTOOL_GSET' cmd. So the driver's callback is always invoked with 'cmd->phy_address' as '0'. The '_ethtool_get_settings()' is called from other files in the 'net/core'. So the fix is applied to the 'ethtool_get_settings()' which is only called in the context of the 'ethtool'. Signed-off-by: Arun Parameswaran <aparames@broadcom.com> Reviewed-by: Ray Jui <rjui@broadcom.com> Reviewed-by: Scott Branden <sbranden@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-12switchdev: remove NETIF_F_HW_SWITCH_OFFLOAD feature flagScott Feldman
Roopa said remove the feature flag for this series and she'll work on bringing it back if needed at a later date. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts: drivers/net/ethernet/rocker/rocker.c The rocker commit was two overlapping changes, one to rename the ->vport member to ->pport, and another making the bitmask expression use '1ULL' instead of plain '1'. Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-21ethtool: use "ops" name consistenty in ethtool_set_rxfh()Dan Carpenter
"dev->ethtool_ops" and "ops" are the same, but we should use "ops" everywhere to be consistent. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-20ethtool: Add hw-switch-offload to netdev_features_strings.Rami Rosen
commit aafb3e98b279 (netdev: introduce new NETIF_F_HW_SWITCH_OFFLOAD feature flag for switch device offloads) add a new feature without adding it to netdev_features_strings array; this patch fixes this. Signed-off-by: Rami Rosen <ramirose@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-06ethtool: Extend ethtool plugin module eeprom API to phylibEd Swierk
This patch extends the ethtool plugin module eeprom API to support cards whose phy support is delegated to a separate driver. The handlers for ETHTOOL_GMODULEINFO and ETHTOOL_GMODULEEEPROM call the module_info and module_eeprom functions if the phy driver provides them; otherwise the handlers call the equivalent ethtool_ops functions provided by network drivers with built-in phy support. Signed-off-by: Ed Swierk <eswierk@skyportsystems.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-08ethtool: Support for configurable RSS hash functionEyal Perry
This patch extends the set/get_rxfh ethtool-options for getting or setting the RSS hash function. It modifies drivers implementation of set/get_rxfh accordingly. This change also delegates the responsibility of checking whether a modification to a certain RX flow hash parameter is supported to the driver implementation of set_rxfh. User-kernel API is done through the new hfunc bitmask field in the ethtool_rxfh struct. A bit set in the hfunc field is corresponding to an index in the new string-set ETH_SS_RSS_HASH_FUNCS. Got approval from most of the relevant driver maintainers that their driver is using Toeplitz, and for the few that didn't answered, also assumed it is Toeplitz. Cc: Tom Lendacky <thomas.lendacky@amd.com> Cc: Ariel Elior <ariel.elior@qlogic.com> Cc: Prashant Sreedharan <prashant@broadcom.com> Cc: Michael Chan <mchan@broadcom.com> Cc: Hariprasad S <hariprasad@chelsio.com> Cc: Sathya Perla <sathya.perla@emulex.com> Cc: Subbu Seetharaman <subbu.seetharaman@emulex.com> Cc: Ajit Khaparde <ajit.khaparde@emulex.com> Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Cc: Jesse Brandeburg <jesse.brandeburg@intel.com> Cc: Bruce Allan <bruce.w.allan@intel.com> Cc: Carolyn Wyborny <carolyn.wyborny@intel.com> Cc: Don Skidmore <donald.c.skidmore@intel.com> Cc: Greg Rose <gregory.v.rose@intel.com> Cc: Matthew Vick <matthew.vick@intel.com> Cc: John Ronciak <john.ronciak@intel.com> Cc: Mitch Williams <mitch.a.williams@intel.com> Cc: Amir Vadai <amirv@mellanox.com> Cc: Solarflare linux maintainers <linux-net-drivers@solarflare.com> Cc: Shradha Shah <sshah@solarflare.com> Cc: Shreyas Bhatewara <sbhatewara@vmware.com> Cc: "VMware, Inc." <pv-drivers@vmware.com> Cc: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Eyal Perry <eyalpe@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-16net: provide a per host RSS key generic infrastructureEric Dumazet
RSS (Receive Side Scaling) typically uses Toeplitz hash and a 40 or 52 bytes RSS key. Some drivers use a constant (and well known key), some drivers use a random key per port, making bonding setups hard to tune. Well known keys increase attack surface, considering that number of queues is usually a power of two. This patch provides infrastructure to help drivers doing the right thing. netdev_rss_key_fill() should be used by drivers to initialize their RSS key, even if they provide ethtool -X support to let user redefine the key later. A new /proc/sys/net/core/netdev_rss_key file can be used to get the host RSS key even for drivers not providing ethtool -x support, in case some applications want to precisely setup flows to match some RX queues. Tested: myhost:~# cat /proc/sys/net/core/netdev_rss_key 11:63:99:bb:79:fb:a5:a7:07:45:b2:20:bf:02:42:2d:08:1a:dd:19:2b:6b:23:ac:56:28:9d:70:c3:ac:e8:16:4b:b7:c1:10:53:a4:78:41:36:40:74:b6:15:ca:27:44:aa:b3:4d:72 myhost:~# ethtool -x eth0 RX flow hash indirection table for eth0 with 8 RX ring(s): 0: 0 1 2 3 4 5 6 7 RSS hash key: 11:63:99:bb:79:fb:a5:a7:07:45:b2:20:bf:02:42:2d:08:1a:dd:19:2b:6b:23:ac:56:28:9d:70:c3:ac:e8:16:4b:b7:c1:10:53:a4:78:41 Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-05net: Remove MPLS GSO feature.Pravin B Shelar
Device can export MPLS GSO support in dev->mpls_features same way it export vlan features in dev->vlan_features. So it is safe to remove NETIF_F_GSO_MPLS redundant flag. Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
2014-10-31net: ethtool: Return -EOPNOTSUPP if user space tries to read EEPROM with lengh 0Guenter Roeck
If a driver supports reading EEPROM but no EEPROM is installed in the system, the driver's get_eeprom_len function returns 0. ethtool will subsequently try to read that zero-length EEPROM anyway. If the driver does not support EEPROM access at all, this operation will return -EOPNOTSUPP. If the driver does support EEPROM access but no EEPROM is installed, the operation will return -EINVAL. Return -EOPNOTSUPP in both cases for consistency. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-06ethtool: Ethtool parameter to dynamically change tx_copybreakEric Dumazet
Use new ethtool [sg]et_tunable() to set tx_copybread (inline threshold) Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-05ethtool: Add generic options for tunablesGovindarajulu Varadarajan
This patch adds new ethtool cmd, ETHTOOL_GTUNABLE & ETHTOOL_STUNABLE for getting tunable values from driver. Add get_tunable and set_tunable to ethtool_ops. Driver implements these functions for getting/setting tunable value. Signed-off-by: Govindarajulu Varadarajan <_govind@gmx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-03ethtool: Check that reserved fields of struct ethtool_rxfh are 0Ben Hutchings
We should fail rather than silently ignoring use of these extensions. Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-22 16:10:03 +0000