summaryrefslogtreecommitdiff
path: root/net/can
AgeCommit message (Collapse)Author
2021-03-29can: isotp: fix msg_namelen values depending on CAN_REQUIRED_SIZEOliver Hartkopp
Since commit f5223e9eee65 ("can: extend sockaddr_can to include j1939 members") the sockaddr_can has been extended in size and a new CAN_REQUIRED_SIZE macro has been introduced to calculate the protocol specific needed size. The ABI for the msg_name and msg_namelen has not been adapted to the new CAN_REQUIRED_SIZE macro for the other CAN protocols which leads to a problem when an existing binary reads the (increased) struct sockaddr_can in msg_name. Fixes: e057dd3fc20f ("can: add ISO 15765-2:2016 transport protocol") Reported-by: Richard Weinberger <richard@nod.at> Acked-by: Kurt Van Dijck <dev.kurt@vandijck-laurijssen.be> Link: https://lore.kernel.org/linux-can/1135648123.112255.1616613706554.JavaMail.zimbra@nod.at/T/#t Link: https://lore.kernel.org/r/20210325125850.1620-2-socketcan@hartkopp.net Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-03-29can: bcm/raw: fix msg_namelen values depending on CAN_REQUIRED_SIZEOliver Hartkopp
Since commit f5223e9eee65 ("can: extend sockaddr_can to include j1939 members") the sockaddr_can has been extended in size and a new CAN_REQUIRED_SIZE macro has been introduced to calculate the protocol specific needed size. The ABI for the msg_name and msg_namelen has not been adapted to the new CAN_REQUIRED_SIZE macro for the other CAN protocols which leads to a problem when an existing binary reads the (increased) struct sockaddr_can in msg_name. Fixes: f5223e9eee65 ("can: extend sockaddr_can to include j1939 members") Reported-by: Richard Weinberger <richard@nod.at> Tested-by: Richard Weinberger <richard@nod.at> Acked-by: Kurt Van Dijck <dev.kurt@vandijck-laurijssen.be> Link: https://lore.kernel.org/linux-can/1135648123.112255.1616613706554.JavaMail.zimbra@nod.at/T/#t Link: https://lore.kernel.org/r/20210325125850.1620-1-socketcan@hartkopp.net Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-03-20can: isotp: tx-path: zero initialize outgoing CAN framesOliver Hartkopp
Commit d4eb538e1f48 ("can: isotp: TX-path: ensure that CAN frame flags are initialized") ensured the TX flags to be properly set for outgoing CAN frames. In fact the root cause of the issue results from a missing initialization of outgoing CAN frames created by isotp. This is no problem on the CAN bus as the CAN driver only picks the correctly defined content from the struct can(fd)_frame. But when the outgoing frames are monitored (e.g. with candump) we potentially leak some bytes in the unused content of struct can(fd)_frame. Fixes: e057dd3fc20f ("can: add ISO 15765-2:2016 transport protocol") Cc: Marc Kleine-Budde <mkl@pengutronix.de> Link: https://lore.kernel.org/r/20210319100619.10858-1-socketcan@hartkopp.net Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-03-16can: isotp: TX-path: ensure that CAN frame flags are initializedMarc Kleine-Budde
The previous patch ensures that the TX flags (struct can_isotp_ll_options::tx_flags) are 0 for classic CAN frames or a user configured value for CAN-FD frames. This patch sets the CAN frames flags unconditionally to the ISO-TP TX flags, so that they are initialized to a proper value. Otherwise when running "candump -x" on a classical CAN ISO-TP stream shows wrongly set "B" and "E" flags. | $ candump any,0:0,#FFFFFFFF -extA | [...] | can0 TX B E 713 [8] 2B 0A 0B 0C 0D 0E 0F 00 | can0 TX B E 713 [8] 2C 01 02 03 04 05 06 07 | can0 TX B E 713 [8] 2D 08 09 0A 0B 0C 0D 0E | can0 TX B E 713 [8] 2E 0F 00 01 02 03 04 05 Fixes: e057dd3fc20f ("can: add ISO 15765-2:2016 transport protocol") Link: https://lore.kernel.org/r/20210218215434.1708249-2-mkl@pengutronix.de Cc: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-03-16can: isotp: isotp_setsockopt(): only allow to set low level TX flags for CAN-FDMarc Kleine-Budde
CAN-FD frames have struct canfd_frame::flags, while classic CAN frames don't. This patch refuses to set TX flags (struct can_isotp_ll_options::tx_flags) on non CAN-FD isotp sockets. Fixes: e057dd3fc20f ("can: add ISO 15765-2:2016 transport protocol") Link: https://lore.kernel.org/r/20210218215434.1708249-2-mkl@pengutronix.de Cc: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-02-24net: introduce CAN specific pointer in the struct net_deviceOleksij Rempel
Since 20dd3850bcf8 ("can: Speed up CAN frame receiption by using ml_priv") the CAN framework uses per device specific data in the AF_CAN protocol. For this purpose the struct net_device->ml_priv is used. Later the ml_priv usage in CAN was extended for other users, one of them being CAN_J1939. Later in the kernel ml_priv was converted to an union, used by other drivers. E.g. the tun driver started storing it's stats pointer. Since tun devices can claim to be a CAN device, CAN specific protocols will wrongly interpret this pointer, which will cause system crashes. Mostly this issue is visible in the CAN_J1939 stack. To fix this issue, we request a dedicated CAN pointer within the net_device struct. Reported-by: syzbot+5138c4dd15a0401bec7b@syzkaller.appspotmail.com Fixes: 20dd3850bcf8 ("can: Speed up CAN frame receiption by using ml_priv") Fixes: ffd956eef69b ("can: introduce CAN midlayer private and allocate it automatically") Fixes: 9d71dd0c7009 ("can: add support of SAE J1939 protocol") Fixes: 497a5757ce4e ("tun: switch to net core provided statistics counters") Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Link: https://lore.kernel.org/r/20210223070127.4538-1-o.rempel@pengutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-27Merge tag 'linux-can-next-for-5.12-20210127' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next Marc Kleine-Budde says: ==================== pull-request: can-next 2021-01-27 The first two patches are by me and fix typos on the CAN gw protocol and the flexcan driver. The next patch is by Vincent Mailhol and targets the CAN driver infrastructure, it exports the function that converts the CAN state into a human readable string. A patch by me, which target the CAN driver infrastructure, too, makes the calculation in can_fd_len2dlc() more readable. A patch by Tom Rix fixes a checkpatch warning in the mcba_usb driver. The next seven patches target the mcp251xfd driver. Su Yanjun's patch replaces several hardcoded assumptions when calling regmap, by using regmap_get_val_bytes(). The remaining patches are by me. First an open coded check is replaced by an existing helper function, then in the TX path the padding for CAN-FD frames is cleaned up. The next two patches clean up the RTR frame handling in the RX and TX path. Then support for len8_dlc is added. The last patch adds BQL support. * tag 'linux-can-next-for-5.12-20210127' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next: can: mcp251xfd: add BQL support can: mcp251xfd: add len8_dlc support can: mcp251xfd: mcp251xfd_tx_obj_from_skb(): don't copy data for RTR CAN frames in TX-path can: mcp251xfd: mcp251xfd_hw_rx_obj_to_skb(): don't copy data for RTR CAN frames in RX-path can: mcp251xfd: mcp251xfd_tx_obj_from_skb(): clean up padding of CAN-FD frames can: mcp251xfd: mcp251xfd_start_xmit(): use mcp251xfd_get_tx_free() to check TX is is full can: mcp251xfd: replace sizeof(u32) with val_bytes in regmap can: mcba_usb: remove h from printk format specifier can: length: can_fd_len2dlc(): make legnth calculation readable again can: dev: export can_get_state_str() function can: flexcan: fix typos can: gw: fix typo ==================== Link: https://lore.kernel.org/r/20210127092227.2775573-1-mkl@pengutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-27net: remove redundant 'depends on NET'Masahiro Yamada
These Kconfig files are included from net/Kconfig, inside the if NET ... endif. Remove 'depends on NET', which we know it is already met. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Link: https://lore.kernel.org/r/20210125232026.106855-1-masahiroy@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-27can: gw: fix typoMarc Kleine-Budde
This patch fixes a typo found by codespell. Fixes: 94c23097f991 ("can: gw: support modification of Classical CAN DLCs") Link: https://lore.kernel.org/r/20210127085529.2768537-3-mkl@pengutronix.de Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-01-14Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-13can: isotp: isotp_getname(): fix kernel information leakOliver Hartkopp
Initialize the sockaddr_can structure to prevent a data leak to user space. Suggested-by: Cong Wang <xiyou.wangcong@gmail.com> Reported-by: syzbot+057884e2f453e8afebc8@syzkaller.appspotmail.com Fixes: e057dd3fc20f ("can: add ISO 15765-2:2016 transport protocol") Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Link: https://lore.kernel.org/r/20210112091643.11789-1-socketcan@hartkopp.net Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-01-06can: raw: return -ERANGE when filterset does not fit into user space bufferOliver Hartkopp
Multiple filters (struct can_filter) can be set with the setsockopt() function, which was originally intended as a write-only operation. As getsockopt() also provides a CAN_RAW_FILTER option to read back the given filters, the caller has to provide an appropriate user space buffer. In the case this buffer is too small the getsockopt() silently truncates the filter information and gives no information about the needed space. This is safe but not convenient for the programmer. In net/core/sock.c the SO_PEERGROUPS sockopt had a similar requirement and solved it by returning -ERANGE in the case that the provided data does not fit into the given user space buffer and fills the required size into optlen, so that the caller can retry with a matching buffer length. This patch adopts this approach for CAN_RAW_FILTER getsockopt(). Reported-by: Phillip Schichtel <phillip@schich.tel> Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Tested-By: Phillip Schichtel <phillip@schich.tel> Link: https://lore.kernel.org/r/20201216174928.21663-1-socketcan@hartkopp.net Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-12-11Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
xdp_return_frame_bulk() needs to pass a xdp_buff to __xdp_return(). strlcpy got converted to strscpy but here it makes no functional difference, so just keep the right code. Conflicts: net/netfilter/nf_tables_api.c Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-10can: isotp: add SF_BROADCAST support for functional addressingOliver Hartkopp
When CAN_ISOTP_SF_BROADCAST is set in the CAN_ISOTP_OPTS flags the CAN_ISOTP socket is switched into functional addressing mode, where only single frame (SF) protocol data units can be send on the specified CAN interface and the given tp.tx_id after bind(). In opposite to normal and extended addressing this socket does not register a CAN-ID for reception which would be needed for a 1-to-1 ISOTP connection with a segmented bi-directional data transfer. Sending SFs on this socket is therefore a TX-only 'broadcast' operation. Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: Thomas Wagner <thwa1@web.de> Link: https://lore.kernel.org/r/20201206144731.4609-1-socketcan@hartkopp.net Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-12-09can: isotp: isotp_setsockopt(): block setsockopt on bound socketsOliver Hartkopp
The isotp socket can be widely configured in its behaviour regarding addressing types, fill-ups, receive pattern tests and link layer length. Usually all these settings need to be fixed before bind() and can not be changed afterwards. This patch adds a check to enforce the common usage pattern. Fixes: e057dd3fc20f ("can: add ISO 15765-2:2016 transport protocol") Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Tested-by: Thomas Wagner <thwa1@web.de> Link: https://lore.kernel.org/r/20201203140604.25488-2-socketcan@hartkopp.net Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Link: https://lore.kernel.org/r/20201204133508.742120-3-mkl@pengutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-27Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Trivial conflict in CAN, keep the net-next + the byteswap wrapper. Conflicts: drivers/net/can/usb/gs_usb.c Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-27can: af_can: can_rx_unregister(): remove WARN() statement from list ↵Oliver Hartkopp
operation sanity check To detect potential bugs in CAN protocol implementations (double removal of receiver entries) a WARN() statement has been used if no matching list item was found for removal. The fault injection issued by syzkaller was able to create a situation where the closing of a socket runs simultaneously to the notifier call chain for removing the CAN network device in use. This case is very unlikely in real life but it doesn't break anything. Therefore we just replace the WARN() statement with pr_warn() to preserve the notification for the CAN protocol development. Reported-by: syzbot+381d06e0c8eaacb8706f@syzkaller.appspotmail.com Reported-by: syzbot+d0ddd88c9a7432f041e6@syzkaller.appspotmail.com Reported-by: syzbot+76d62d3b8162883c7d11@syzkaller.appspotmail.com Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Link: https://lore.kernel.org/r/20201126192140.14350-1-socketcan@hartkopp.net Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-11-20can: gw: support modification of Classical CAN DLCsOliver Hartkopp
Add support for data length code modifications for Classical CAN. The netlink configuration interface always allowed to pass any value that fits into a byte, therefore only the modification process had to be extended to handle the raw DLC represenation of Classical CAN frames. When a DLC value from 0 .. F is provided for Classical CAN frame modifications the 'len' value is modified as-is with the exception that potentially existing 9 .. F DLC values in the len8_dlc element are moved to the 'len' element for the modification operation by mod_retrieve_ccdlc(). After the modification the Classical CAN frame DLC information is brought back into the correct format by mod_store_ccdlc() which is filling 'len' and 'len8_dlc' accordingly. Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Link: https://lore.kernel.org/r/20201119084921.2621-1-socketcan@hartkopp.net Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-11-20can: replace can_dlc as variable/element for payload lengthOliver Hartkopp
The naming of can_dlc as element of struct can_frame and also as variable name is misleading as it claims to be a 'data length CODE' but in reality it always was a plain data length. With the indroduction of a new 'len' element in struct can_frame we can now remove can_dlc as name and make clear which of the former uses was a plain length (-> 'len') or a data length code (-> 'dlc') value. Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Link: https://lore.kernel.org/r/20201120100444.3199-1-socketcan@hartkopp.net [mkl: gs_usb: keep struct gs_host_frame::can_dlc as is] Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-11-15can: af_can: prevent potential access of uninitialized member in canfd_rcv()Anant Thazhemadam
In canfd_rcv(), cfd->len is uninitialized when skb->len = 0, and this uninitialized cfd->len is accessed nonetheless by pr_warn_once(). Fix this uninitialized variable access by checking cfd->len's validity condition (cfd->len > CANFD_MAX_DLEN) separately after the skb->len's condition is checked, and appropriately modify the log messages that are generated as well. In case either of the required conditions fail, the skb is freed and NET_RX_DROP is returned, same as before. Fixes: d4689846881d ("can: af_can: canfd_rcv(): replace WARN_ONCE by pr_warn_once") Reported-by: syzbot+9bcb0c9409066696d3aa@syzkaller.appspotmail.com Tested-by: Anant Thazhemadam <anant.thazhemadam@gmail.com> Signed-off-by: Anant Thazhemadam <anant.thazhemadam@gmail.com> Link: https://lore.kernel.org/r/20201103213906.24219-3-anant.thazhemadam@gmail.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-11-15can: af_can: prevent potential access of uninitialized member in can_rcv()Anant Thazhemadam
In can_rcv(), cfd->len is uninitialized when skb->len = 0, and this uninitialized cfd->len is accessed nonetheless by pr_warn_once(). Fix this uninitialized variable access by checking cfd->len's validity condition (cfd->len > CAN_MAX_DLEN) separately after the skb->len's condition is checked, and appropriately modify the log messages that are generated as well. In case either of the required conditions fail, the skb is freed and NET_RX_DROP is returned, same as before. Fixes: 8cb68751c115 ("can: af_can: can_rcv(): replace WARN_ONCE by pr_warn_once") Reported-by: syzbot+9bcb0c9409066696d3aa@syzkaller.appspotmail.com Tested-by: Anant Thazhemadam <anant.thazhemadam@gmail.com> Signed-off-by: Anant Thazhemadam <anant.thazhemadam@gmail.com> Link: https://lore.kernel.org/r/20201103213906.24219-2-anant.thazhemadam@gmail.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-11-03can: isotp: padlen(): make const array static, makes object smallerColin Ian King
Don't populate the const array plen on the stack but instead it static. Makes the object code smaller by 926 bytes. Before: text data bss dec hex filename 26531 1943 64 28538 6f7a net/can/isotp.o After: text data bss dec hex filename 25509 2039 64 27612 6bdc net/can/isotp.o (gcc version 10.2.0) Signed-off-by: Colin Ian King <colin.king@canonical.com> Link: https://lore.kernel.org/r/20201020154203.54711-1-colin.king@canonical.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-11-03can: isotp: isotp_rcv_cf(): enable RX timeout handling in listen-only modeOliver Hartkopp
As reported by Thomas Wagner: https://github.com/hartkopp/can-isotp/issues/34 the timeout handling for data frames is not enabled when the isotp socket is used in listen-only mode (sockopt CAN_ISOTP_LISTEN_MODE). This mode is enabled by the isotpsniffer application which therefore became inconsistend with the strict rx timeout rules when running the isotp protocol in the operational mode. This patch fixes this inconsistency by moving the return condition for the listen-only mode behind the timeout handling code. Reported-by: Thomas Wagner <thwa1@web.de> Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Fixes: e057dd3fc20f ("can: add ISO 15765-2:2016 transport protocol") Link: https://github.com/hartkopp/can-isotp/issues/34 Link: https://lore.kernel.org/r/20201019120229.89326-1-socketcan@hartkopp.net Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-11-03can: isotp: Explain PDU in CAN_ISOTP help textGeert Uytterhoeven
The help text for the CAN_ISOTP config symbol uses the acronym "PDU". However, this acronym is not explained here, nor in Documentation/networking/can.rst. Expand the acronym to make it easier for users to decide if they need to enable the CAN_ISOTP option or not. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20201013141341.28487-1-geert+renesas@glider.be Acked-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-11-03can: j1939: j1939_sk_bind(): return failure if netdev is downZhang Changzhong
When a netdev down event occurs after a successful call to j1939_sk_bind(), j1939_netdev_notify() can handle it correctly. But if the netdev already in down state before calling j1939_sk_bind(), j1939_sk_release() will stay in wait_event_interruptible() blocked forever. Because in this case, j1939_netdev_notify() won't be called and j1939_tp_txtimer() won't call j1939_session_cancel() or other function to clear session for ENETDOWN error, this lead to mismatch of j1939_session_get/put() and jsk->skb_pending will never decrease to zero. To reproduce it use following commands: 1. ip link add dev vcan0 type vcan 2. j1939acd -r 100,80-120 1122334455667788 vcan0 3. presses ctrl-c and thread will be blocked forever This patch adds check for ndev->flags in j1939_sk_bind() to avoid this kind of situation and return with -ENETDOWN. Fixes: 9d71dd0c7009 ("can: add support of SAE J1939 protocol") Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com> Link: https://lore.kernel.org/r/1599460308-18770-1-git-send-email-zhangchangzhong@huawei.com Acked-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-11-03can: proc: can_remove_proc(): silence remove_proc_entry warningZhang Changzhong
If can_init_proc() fail to create /proc/net/can directory, can_remove_proc() will trigger a warning: WARNING: CPU: 6 PID: 7133 at fs/proc/generic.c:672 remove_proc_entry+0x17b0 Kernel panic - not syncing: panic_on_warn set ... Fix to return early from can_remove_proc() if can proc_dir does not exists. Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com> Link: https://lore.kernel.org/r/1594709090-3203-1-git-send-email-zhangchangzhong@huawei.com Fixes: 8e8cda6d737d ("can: initial support for network namespaces") Acked-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-10-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Minor conflicts in net/mptcp/protocol.h and tools/testing/selftests/net/Makefile. In both cases code was added on both sides in the same place so just keep both. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-12can: remove obsolete version stringsOliver Hartkopp
As pointed out by Jakub Kicinski here: http://lore.kernel.org/r/20201009175751.5c54097f@kicinski-fedora-pc1c0hjn.dhcp.thefacebook.com this patch removes the obsolete version information of the different CAN protocols and the AF_CAN core module. Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Link: https://lore.kernel.org/r/20201012074354.25839-2-socketcan@hartkopp.net Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-10-12can: isotp: implement cleanups / improvements from reviewOliver Hartkopp
As pointed out by Jakub Kicinski here: http://lore.kernel.org/r/20201009175751.5c54097f@kicinski-fedora-pc1c0hjn.dhcp.thefacebook.com this patch addresses the remarked issues: - remove empty line in comment - remove default=y for CAN_ISOTP in Kconfig - make use of pr_notice_once() - use GFP_ATOMIC instead of gfp_any() in soft hrtimer context The version strings in the CAN subsystem are removed by a separate patch. Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Link: https://lore.kernel.org/r/20201012074354.25839-1-socketcan@hartkopp.net Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-10-08net: j1939: j1939_session_fresh_new(): fix missing initialization of skbcntMarc Kleine-Budde
This patch add the initialization of skbcnt, similar to: e009f95b1543 can: j1935: j1939_tp_tx_dat_new(): fix missing initialization of skbcnt Let's play save and initialize this skbcnt as well. Suggested-by: Jakub Kicinski <kuba@kernel.org> Fixes: 9d71dd0c7009 ("can: add support of SAE J1939 protocol") Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-10-08can: j1935: j1939_tp_tx_dat_new(): fix missing initialization of skbcntCong Wang
This fixes an uninit-value warning: BUG: KMSAN: uninit-value in can_receive+0x26b/0x630 net/can/af_can.c:650 Reported-and-tested-by: syzbot+3f3837e61a48d32b495f@syzkaller.appspotmail.com Fixes: 9d71dd0c7009 ("can: add support of SAE J1939 protocol") Cc: Robin van der Gracht <robin@protonic.nl> Cc: Oleksij Rempel <linux@rempel-privat.de> Cc: Pengutronix Kernel Team <kernel@pengutronix.de> Cc: Oliver Hartkopp <socketcan@hartkopp.net> Cc: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Link: https://lore.kernel.org/r/20201008061821.24663-1-xiyou.wangcong@gmail.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-10-07can: add ISO 15765-2:2016 transport protocolOliver Hartkopp
CAN Transport Protocols offer support for segmented Point-to-Point communication between CAN nodes via two defined CAN Identifiers. As CAN frames can only transport a small amount of data bytes (max. 8 bytes for 'classic' CAN and max. 64 bytes for CAN FD) this segmentation is needed to transport longer PDUs as needed e.g. for vehicle diagnosis (UDS, ISO 14229) or IP-over-CAN traffic. This protocol driver implements data transfers according to ISO 15765-2:2016 for 'classic' CAN and CAN FD frame types. Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Link: https://lore.kernel.org/r/20200928200404.82229-1-socketcan@hartkopp.net [mkl: Removed "WITH Linux-syscall-note" from isotp.c. Fixed indention, a checkpatch warning and typos. Replaced __u{8,32} by u{8,32}. Removed always false (optlen < 0) check in isotp_setsockopt().] Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-10-06can: raw: add missing error queue supportVincent Mailhol
Error queue are not yet implemented in CAN-raw sockets. The problem: a userland call to recvmsg(soc, msg, MSG_ERRQUEUE) on a CAN-raw socket would unqueue messages from the normal queue without any kind of error or warning. As such, it prevented CAN drivers from using the functionalities that relies on the error queue such as skb_tx_timestamp(). SCM_CAN_RAW_ERRQUEUE is defined as the type for the CAN raw error queue. SCM stands for "Socket control messages". The name is inspired from SCM_J1939_ERRQUEUE of include/uapi/linux/can/j1939.h. Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Link: https://lore.kernel.org/r/20200926162527.270030-1-mailhol.vincent@wanadoo.fr Acked-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-10-06can: af_can: can_rcv_list_find(): fix kernel doc after variable renamingMarc Kleine-Budde
This patch fixes the kernel doc for can_rcv_list_find() which was broken in commit: 3ee6d2bebef8 ("can: af_can: rename find_rcv_list() to can_rcv_list_find()") while renaming a variable, but forgetting to rename the kernel doc, too. Link: http://lore.kernel.org/r/20201006203748.1750156-2-mkl@pengutronix.de Fixes: 3ee6d2bebef8 ("can: af_can: rename find_rcv_list() to can_rcv_list_find()") Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-09-21can: remove "WITH Linux-syscall-note" from SPDX tag of C filesMasahiro Yamada
The "WITH Linux-syscall-note" exception is intended for UAPI headers. See LICENSES/exceptions/Linux-syscall-note Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Link: https://lore.kernel.org/r/20200403073741.18352-1-masahiroy@kernel.org Acked-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-09-21can: raw: fix indentionMarc Kleine-Budde
This patch fixes the indention to follow kernel coding style. Link: https://lore.kernel.org/r/20200915223527.1417033-7-mkl@pengutronix.de Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-09-21can: net: fix spelling mistakesMarc Kleine-Budde
This patch fixes spelling erros found by "codespell" in the net/can subtree. Link: https://lore.kernel.org/r/20200915223527.1417033-5-mkl@pengutronix.de Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-08-23treewide: Use fallthrough pseudo-keywordGustavo A. R. Silva
Replace the existing /* fall through */ comments and its variants with the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary fall-through markings when it is the case. [1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
2020-08-15can: j1939: add rxtimer for multipacket broadcast sessionZhang Changzhong
According to SAE J1939/21 (Chapter 5.12.3 and APPENDIX C), for transmit side the required time interval between packets of a multipacket broadcast message is 50 to 200 ms, the responder shall use a timeout of 250ms (provides margin allowing for the maximumm spacing of 200ms). For receive side a timeout will occur when a time of greater than 750 ms elapsed between two message packets when more packets were expected. So this patch fix and add rxtimer for multipacket broadcast session. Fixes: 9d71dd0c7009 ("can: add support of SAE J1939 protocol") Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com> Link: https://lore.kernel.org/r/1596599425-5534-5-git-send-email-zhangchangzhong@huawei.com Acked-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-08-15can: j1939: abort multipacket broadcast session when timeout occursZhang Changzhong
If timeout occurs, j1939_tp_rxtimer() first calls hrtimer_start() to restart rxtimer, and then calls __j1939_session_cancel() to set session->state = J1939_SESSION_WAITING_ABORT. At next timeout expiration, because of the J1939_SESSION_WAITING_ABORT session state j1939_tp_rxtimer() will call j1939_session_deactivate_activate_next() to deactivate current session, and rxtimer won't be set. But for multipacket broadcast session, __j1939_session_cancel() don't set session->state = J1939_SESSION_WAITING_ABORT, thus current session won't be deactivate and hrtimer_start() is called to start new rxtimer again and again. So fix it by moving session->state = J1939_SESSION_WAITING_ABORT out of if (!j1939_cb_is_broadcast(&session->skcb)) statement. Fixes: 9d71dd0c7009 ("can: add support of SAE J1939 protocol") Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com> Link: https://lore.kernel.org/r/1596599425-5534-4-git-send-email-zhangchangzhong@huawei.com Acked-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-08-15can: j1939: cancel rxtimer on multipacket broadcast session completeZhang Changzhong
If j1939_xtp_rx_dat_one() receive last frame of multipacket broadcast message, j1939_session_timers_cancel() should be called to cancel rxtimer. Fixes: 9d71dd0c7009 ("can: add support of SAE J1939 protocol") Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com> Link: https://lore.kernel.org/r/1596599425-5534-3-git-send-email-zhangchangzhong@huawei.com Acked-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-08-15can: j1939: fix support for multipacket broadcast messageZhang Changzhong
Currently j1939_tp_im_involved_anydir() in j1939_tp_recv() check the previously set flags J1939_ECU_LOCAL_DST and J1939_ECU_LOCAL_SRC of incoming skb, thus multipacket broadcast message was aborted by receive side because it may come from remote ECUs and have no exact dst address. Similarly, j1939_tp_cmd_recv() and j1939_xtp_rx_dat() didn't process broadcast message. So fix it by checking and process broadcast message in j1939_tp_recv(), j1939_tp_cmd_recv() and j1939_xtp_rx_dat(). Fixes: 9d71dd0c7009 ("can: add support of SAE J1939 protocol") Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com> Link: https://lore.kernel.org/r/1596599425-5534-2-git-send-email-zhangchangzhong@huawei.com Acked-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-08-14can: j1939: transport: j1939_xtp_rx_dat_one(): compare own packets to detect ↵Oleksij Rempel
corruptions Since the stack relays on receiving own packets, it was overwriting own transmit buffer from received packets. At least theoretically, the received echo buffer can be corrupt or changed and the session partner can request to resend previous data. In this case we will re-send bad data. With this patch we will stop to overwrite own TX buffer and use it for sanity checking. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Link: https://lore.kernel.org/r/20200807105200.26441-6-o.rempel@pengutronix.de Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-08-14can: j1939: transport: add j1939_session_skb_find_by_offset() functionOleksij Rempel
Sometimes it makes no sense to search the skb by pkt.dpo, since we need next the skb within the transaction block. This may happen if we have an ETP session with CTS set to less than 255 packets. After this patch, we will be able to work with ETP sessions where the block size (ETP.CM_CTS byte 2) is less than 255 packets. Reported-by: Henrique Figueira <henrislip@gmail.com> Reported-by: https://github.com/linux-can/can-utils/issues/228 Fixes: 9d71dd0c7009 ("can: add support of SAE J1939 protocol") Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Link: https://lore.kernel.org/r/20200807105200.26441-5-o.rempel@pengutronix.de Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-08-14can: j1939: socket: j1939_sk_bind(): make sure ml_priv is allocatedOleksij Rempel
This patch adds check to ensure that the struct net_device::ml_priv is allocated, as it is used later by the j1939 stack. The allocation is done by all mainline CAN network drivers, but when using bond or team devices this is not the case. Bail out if no ml_priv is allocated. Reported-by: syzbot+f03d384f3455d28833eb@syzkaller.appspotmail.com Fixes: 9d71dd0c7009 ("can: add support of SAE J1939 protocol") Cc: linux-stable <stable@vger.kernel.org> # >= v5.4 Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Link: https://lore.kernel.org/r/20200807105200.26441-4-o.rempel@pengutronix.de Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-08-14can: j1939: transport: j1939_session_tx_dat(): fix use-after-free read in ↵Oleksij Rempel
j1939_tp_txtimer() The current stack implementation do not support ECTS requests of not aligned TP sized blocks. If ECTS will request a block with size and offset spanning two TP blocks, this will cause memcpy() to read beyond the queued skb (which does only contain one TP sized block). Sometimes KASAN will detect this read if the memory region beyond the skb was previously allocated and freed. In other situations it will stay undetected. The ETP transfer in any case will be corrupted. This patch adds a sanity check to avoid this kind of read and abort the session with error J1939_XTP_ABORT_ECTS_TOO_BIG. Reported-by: syzbot+5322482fe520b02aea30@syzkaller.appspotmail.com Fixes: 9d71dd0c7009 ("can: add support of SAE J1939 protocol") Cc: linux-stable <stable@vger.kernel.org> # >= v5.4 Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Link: https://lore.kernel.org/r/20200807105200.26441-3-o.rempel@pengutronix.de Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-08-14can: j1939: transport: j1939_simple_recv(): ignore local J1939 messages send ↵Oleksij Rempel
not by J1939 stack In current J1939 stack implementation, we process all locally send messages as own messages. Even if it was send by CAN_RAW socket. To reproduce it use following commands: testj1939 -P -r can0:0x80 & cansend can0 18238040#0123 This step will trigger false positive not critical warning: j1939_simple_recv: Received already invalidated message With this patch we add additional check to make sure, related skb is own echo message. Fixes: 9d71dd0c7009 ("can: add support of SAE J1939 protocol") Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Link: https://lore.kernel.org/r/20200807105200.26441-2-o.rempel@pengutronix.de Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-08-14can: j1939: fix kernel-infoleak in j1939_sk_sock2sockaddr_can()Eric Dumazet
syzbot found that at least 2 bytes of kernel information were leaked during getsockname() on AF_CAN CAN_J1939 socket. Since struct sockaddr_can has in fact two holes, simply clear the whole area before filling it with useful data. BUG: KMSAN: kernel-infoleak in kmsan_copy_to_user+0x81/0x90 mm/kmsan/kmsan_hooks.c:253 CPU: 0 PID: 8466 Comm: syz-executor511 Not tainted 5.8.0-rc5-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x21c/0x280 lib/dump_stack.c:118 kmsan_report+0xf7/0x1e0 mm/kmsan/kmsan_report.c:121 kmsan_internal_check_memory+0x238/0x3d0 mm/kmsan/kmsan.c:423 kmsan_copy_to_user+0x81/0x90 mm/kmsan/kmsan_hooks.c:253 instrument_copy_to_user include/linux/instrumented.h:91 [inline] _copy_to_user+0x18e/0x260 lib/usercopy.c:39 copy_to_user include/linux/uaccess.h:186 [inline] move_addr_to_user+0x3de/0x670 net/socket.c:237 __sys_getsockname+0x407/0x5e0 net/socket.c:1909 __do_sys_getsockname net/socket.c:1920 [inline] __se_sys_getsockname+0x91/0xb0 net/socket.c:1917 __x64_sys_getsockname+0x4a/0x70 net/socket.c:1917 do_syscall_64+0xad/0x160 arch/x86/entry/common.c:386 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x440219 Code: Bad RIP value. RSP: 002b:00007ffe5ee150c8 EFLAGS: 00000246 ORIG_RAX: 0000000000000033 RAX: ffffffffffffffda RBX: 00000000004002c8 RCX: 0000000000440219 RDX: 0000000020000240 RSI: 0000000020000100 RDI: 0000000000000003 RBP: 00000000006ca018 R08: 0000000000000000 R09: 00000000004002c8 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000401a20 R13: 0000000000401ab0 R14: 0000000000000000 R15: 0000000000000000 Local variable ----address@__sys_getsockname created at: __sys_getsockname+0x91/0x5e0 net/socket.c:1894 __sys_getsockname+0x91/0x5e0 net/socket.c:1894 Bytes 2-3 of 24 are uninitialized Memory access of size 24 starts at ffff8880ba2c7de8 Data copied to user address 0000000020000100 Fixes: 9d71dd0c7009 ("can: add support of SAE J1939 protocol") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Cc: Robin van der Gracht <robin@protonic.nl> Cc: Oleksij Rempel <o.rempel@pengutronix.de> Cc: Pengutronix Kernel Team <kernel@pengutronix.de> Cc: linux-can@vger.kernel.org Acked-by: Oleksij Rempel <o.rempel@pengutronix.de> Link: https://lore.kernel.org/r/20200813161834.4021638-1-edumazet@google.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-07-24net: pass a sockptr_t into ->setsockoptChristoph Hellwig
Rework the remaining setsockopt code to pass a sockptr_t instead of a plain user pointer. This removes the last remaining set_fs(KERNEL_DS) outside of architecture specific code. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Stefan Schmidt <stefan@datenfreihafen.org> [ieee802154] Acked-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-19net: make ->{get,set}sockopt in proto_ops optionalChristoph Hellwig
Just check for a NULL method instead of wiring up sock_no_{get,set}sockopt. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-30 16:54:13 +0000